Date:	Fri, 19 Feb 2010 09:10:34 +0100
From:	Bruno Prémont <bonbons@...ux-vserver.org>
To:	"Benjamin Li" <benli@...adcom.com>
Cc:	NetDEV <netdev@...r.kernel.org>,
	"Michael Chan" <mchan@...adcom.com>,
	Linux-Kernel <linux-kernel@...r.kernel.org>
Subject: Re: BNX2: Kernel crashes with 2.6.31 and 2.6.31.9

Hi Benjamin,

On Tue, 29 Dec 2009 21:08:11 "Benjamin Li" wrote:
> Could you try running with the attached patch?  This debug patch is
> built against the linux-2.6.31.9 kernel.  I think the panic is
> occuring right before a reset has occured due to a TX timeout.  To
> see if this is happening, this patch will print hardware state
> information when a TX timeout occurs.  If you could run with this
> patch and send the logs when the panic occurs, I would really
> appreciate it.
> 
> Thanks again.
> 
> -Ben

Sorry for replying only this late but I've been too busy with other
things.

Anyhow, I've been doing some more testing yesterday and today and now
am able to reproduce the/a crash pretty easily.

Either running netconsole and doing 'echo t > /proc/sysrq-trigger' via
SSH on otherwise idle server (from local console nothing bad happens),
but then I have no means to communicate with the kernel (I guess it's
deadlocked somewhere in printk code)

The slightly less easy way to trigger it is with a dummy module that
kind of simulates netconsole behavior but with dummy data (see
attached). I have to have some more traffic (TCP?) going on for the bug
to trigger and tell my module multiple times to push data. This way
server is still accessible via VGA or serial console.

Attached are my 'netbomb.c' (which is a modified netconsole.c) and
full kernel log. This time running a 2.6.33-rc8-git3 kernel, having
forward-ported your patch above (e.g. half of it was already present)


I this time I got the following trace:
[  134.643292] BUG: unable to handle kernel NULL pointer dereference at (null)
[  134.643304] IP: [<ffffffffa003edc2>] bnx2_poll_work+0x32/0x13d0 [bnx2]
[  134.643314] PGD 2a972a067 PUD 2aa245067 PMD 0
[  134.643319] Oops: 0000 [#1] SMP
[  134.643323] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.6/class
[  134.643328] CPU 4
[  134.643334] Pid: 3226, comm: cat Not tainted 2.6.33-rc8-git3-x86_64 #3 /ProLiant DL360 G5
[  134.643339] RIP: 0010:[<ffffffffa003edc2>]  [<ffffffffa003edc2>] bnx2_poll_work+0x32/0x13d0 [bnx2]
[  134.643347] RSP: 0018:ffff8802a9643b38  EFLAGS: 00010092
[  134.643351] RAX: 0000000000000000 RBX: ffff8802afab57c0 RCX: 0000000000000010
[  134.643355] RDX: 0000000000000000 RSI: ffff8802afab57c0 RDI: ffff8802afab4580
[  134.643359] RBP: ffff8802a9643cd8 R08: ffff8802af051000 R09: 0000000000000007
[  134.643363] R10: 000000000000000e R11: 0000000000000000 R12: 0000000000000000
[  134.643367] R13: 0000000000000010 R14: 0000000000000000 R15: ffff8802afab4580
[  134.643371] FS:  0000000000000000(0000) GS:ffff880028300000(0063) knlGS:00000000f765f6c0
[  134.643376] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  134.643380] CR2: 0000000000000000 CR3: 00000002a9606000 CR4: 00000000000006e0
[  134.643384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  134.643388] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  134.643392] Process cat (pid: 3226, threadinfo ffff8802a9642000, task ffff8802aa14bff0)
[  134.643396] Stack:
[  134.643398]  0000000000000070 0000000000000002 0000000000000010 ffff8802afab57c0
[  134.643404] <0> ffff8802afab4580 0000000300000002 0000000000000000 0000000100000002
[  134.643410] <0> 0000000000000000 0000000200025220 ffffffff81862e80 0000000000000001
[  134.643418] Call Trace:
[  134.643427]  [<ffffffff8107e3fe>] ? __alloc_pages_nodemask+0xfe/0x660
[  134.643433]  [<ffffffff811b6de6>] ? msi_set_mask_bit+0x26/0xc0
[  134.643438]  [<ffffffff811b6e8b>] ? unmask_msi_irq+0xb/0x10
[  134.643443]  [<ffffffff8106db54>] ? default_enable+0x24/0x40
[  134.643448]  [<ffffffff8106d9b6>] ? check_irq_resend+0x26/0x70
[  134.643453]  [<ffffffff8106cc23>] ? __enable_irq+0x73/0x80
[  134.643459]  [<ffffffffa004019e>] bnx2_poll_msix+0x3e/0xd0 [bnx2]
[  134.643465]  [<ffffffff8135bcd1>] netpoll_poll+0xe1/0x3c0
[  134.643470]  [<ffffffff8135c168>] netpoll_send_skb+0x118/0x210
[  134.643475]  [<ffffffff8135c45b>] netpoll_send_udp+0x1fb/0x210
[  134.643480]  [<ffffffffa00981c5>] write_msg+0x95/0xd0 [netbomb]
[  134.643485]  [<ffffffffa0098255>] netbomb_write+0x55/0xa4 [netbomb]
[  134.643492]  [<ffffffff810f6581>] proc_reg_write+0x71/0xb0
[  134.643498]  [<ffffffff810ab6cb>] vfs_write+0xcb/0x180
[  134.643503]  [<ffffffff810ab870>] sys_write+0x50/0x90
[  134.643509]  [<ffffffff8102a1a4>] sysenter_dispatch+0x7/0x2b
[  134.643513] Code: 56 41 55 41 54 53 48 81 ec 78 01 00 00 48 89 bd 80 fe ff ff 48 89 b5 78 fe ff ff 89 95 74 fe ff ff 89 8d 70 fe ff ff 48 8b 46 70 <0f> b7 10 31 c0 80 fa ff 0f 94 c0 01 c2 66 39 96 12 02 00 00 0f
[  134.643551] RIP  [<ffffffffa003edc2>] bnx2_poll_work+0x32/0x13d0 [bnx2]
[  134.643557]  RSP <ffff8802a9643b38>
[  134.643559] CR2: 0000000000000000
[  134.643563] ---[ end trace 48bdec67d6d7aadb ]---

Running objdump on kernel compile with debugging symbols this matches:
000000000000ad90 <bnx2_poll_work>:
        }
}

static int bnx2_poll_work(struct bnx2 *bp, struct bnx2_napi *bnapi,
                          int work_done, int budget)
{
    ad90:       55                      push   %rbp
    ad91:       48 89 e5                mov    %rsp,%rbp
    ad94:       41 57                   push   %r15
    ad96:       41 56                   push   %r14
    ad98:       41 55                   push   %r13
    ad9a:       41 54                   push   %r12
    ad9c:       53                      push   %rbx
    ad9d:       48 81 ec 78 01 00 00    sub    $0x178,%rsp
    ada4:       48 89 bd 80 fe ff ff    mov    %rdi,-0x180(%rbp)
    adab:       48 89 b5 78 fe ff ff    mov    %rsi,-0x188(%rbp)
    adb2:       89 95 74 fe ff ff       mov    %edx,-0x18c(%rbp)
    adb8:       89 8d 70 fe ff ff       mov    %ecx,-0x190(%rbp)
{
        u16 cons;

        /* Tell compiler that status block fields can change. */
        barrier();
        cons = *bnapi->hw_tx_cons_ptr;
    adbe:       48 8b 46 70             mov    0x70(%rsi),%rax
    adc2:       0f b7 10                movzwl (%rax),%edx
        barrier();
        if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
                cons++;
    adc5:       31 c0                   xor    %eax,%eax
    adc7:       80 fa ff                cmp    $0xff,%dl
    adca:       0f 94 c0                sete   %al
    adcd:       01 c2                   add    %eax,%edx
                          int work_done, int budget)
{
        struct bnx2_tx_ring_info *txr = &bnapi->tx_ring;
        struct bnx2_rx_ring_info *rxr = &bnapi->rx_ring;

        if (bnx2_get_hw_tx_cons(bnapi) != txr->hw_tx_cons)
    adcf:       66 39 96 12 02 00 00    cmp    %dx,0x212(%rsi)
    add6:       0f 84 4f 03 00 00       je     b12b <bnx2_poll_work+0x39b>


So as already determined bnapi->hw_tx_cons_ptr is NULL... but nothing is
happening after that on network side.

Regards,
Bruno
Download attachment "bnx2.dmesg" of type "application/octet-stream" (56462 bytes)

View attachment "netbomb.c" of type "text/x-c++src" (9478 bytes)

Powered by blists - more mailing lists