Message-ID: <4B865176.7080806@ge.com>
Date:	Thu, 25 Feb 2010 10:31:18 +0000
From:	Martyn Welch <martyn.welch@...com>
To:	linuxppc-dev list <linuxppc-dev@...abs.org>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
CC:	Anton Vorontsov <avorontsov@...mvista.com>,
	Sandeep Gopalpet <Sandeep.Kumar@...escale.com>,
	davem@...emloft.net
Subject: Re: Gianfar driver failing on MPC8641D based board

Martyn Welch wrote:
> I have recently attempted to boot an 8641D based board from an NFS root.
> The boot process grinds to a halt not long after the first access of the
> NFS root and I receive multiple "nfs: server 192.168.0.1 not responding,
> still trying" messages. Wireshark suggests that there is no further
> traffic from this board at this point on. The NFS server seems to
> eventually try sending duplicate packets it's already sent, which
> results in "nfs: server 192.168.0.1 OK" messages, but the "not
> responding" messages resume with no further traffic from the board.
>
> I am able to boot to a ramdisk fine and the network seems to work -
> though I haven't really pushed the interface from it.
>
> I have attempted to git bisect, though I wasn't able to get much further
> than discovering the problem was introduced in the 2.6.33 merge window -
> at which point the gianfar network driver fails to compile (I have tried
> to git bisect skip many, many times to no avail).
>
> NFS booting fails for this board on todays linux-next, the master branch
> of Kumar's PPC tree and the head of the main tree. I have also been able
> to NFS boot from a random x86 based board that I have, using the head of
> the main tree and the linux-next tree.
>
> Copying the gianfar drivers from 2.6.32 into the head of the main tree
> restores the correct behaviour and I'm able to NFS boot. I have heard
> from others that the latest drivers work on 83xx and 85xx based boards,
> but it seems to be broken on at least the 8641D.
>
> I can see there has been a fair amount of work done on the gianfar
> driver, I assume that this is a bug introduced by the multiple queue
> support, but I'm way out of my depth on this.
>   
I have just compiled 2.6.33 for the Freescale MPC8641_HPCN demo board
and am having still experiencing the problems outlined in my previous
email, though I have noticed that I tend to be able to boot from cold,
but my boot fails on reboot. Hitting the reset button doesn't help, I
need to actually power the machine on and off again for it to work.

As before, I'm way out of my depth in this, any one have any ideas?
Below is a dump of the failed boot process:

U-Boot 2009.01-00181-gc1b7c70 (Jan 30 2009 - 11:17:31)

Freescale PowerPC
CPU:
    Core: E600 Core 0, Version: 0.2, (0x80040202)
    System: Unknown, Version: 2.0, (0x80900120)
    Clocks: CPU:1000 MHz, MPX: 400 MHz, DDR: 200 MHz, LBC:  25 MHz
    L2: Enabled
Board: MPC8641HPCN, System ID: 0x10, System Version: 0x10, FPGA Version:
0x22
I2C:   ready
DRAM:      DDR:  1 GB
FLASH:  8 MB
Invalid ID (ff ff ff ff)
               Scanning PCI bus 01
    PCI-EXPRESS 1 on bus 00 - 02
    PCI-EXPRESS 2 on bus 03 - 03
Video: No radeon video card found!
In:    serial
Out:   serial
Err:   serial
SCSI:  AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
flags: ncq ilck pm led clo pmp pio slum part
scanning bus for devices...
Net:   eTSEC1, eTSEC2, eTSEC3, eTSEC4
=>  tftp 4000000 hpcn/uImage-torvalds-linux-2.6
Speed: 1000, full duplex
Using eTSEC1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'hpcn/uImage-torvalds-linux-2.6'.
Load address: 0x4000000
Loading: #################################################################
         #################################################################
         #######################################################
done
Bytes transferred = 2709050 (29563a hex)
=> tftp 5000000 hpcn/mpc8641_hpcn-torvalds-linux-2.6.dtb
Speed: 1000, full duplex
Using eTSEC1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'hpcn/mpc8641_hpcn-torvalds-linux-2.6.dtb'.
Load address: 0x5000000
Loading: #
done
Bytes transferred = 11523 (2d03 hex)
=> setenv bootargs "root=/dev/nfs rw
nfsroot=192.168.0.1:/tftpboot/hpcn/root/ i"
=> bootm 4000000 - 5000000
WARNING: adjusting available memory to 10000000
## Booting kernel from Legacy Image at 04000000 ...
   Image Name:   Linux-2.6.33-00001-gbaac35c
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    2708986 Bytes =  2.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 05000000
   Booting using the fdt blob at 0x5000000
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 007fa000, end 007ffd02 ... OK
Using MPC86xx HPCN machine description
Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
Linux version 2.6.33-00001-gbaac35c (welchma@...J7S4D2J) (gcc version
4.1.2) #20
CPU maps initialized for 1 thread per core
bootconsole [udbg0] enabled
setup_arch: bootmem
mpc86xx_hpcn_setup_arch()
Found FSL PCI host bridge at 0x00000000ffe08000. Firmware bus number: 0->2
PCI host bridge /pcie@...08000 (primary) ranges:
 MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000
  IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000
/pcie@...08000: PCICSRBAR @ 0xfff00000
Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->0
PCI host bridge /pcie@...09000  ranges:
 MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
  IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000
/pcie@...09000: PCICSRBAR @ 0xfff00000
MPC86xx HPCN board from Freescale Semiconductor
arch: exit
Zone PFN ranges:
  DMA      0x00000000 -> 0x00030000
  Normal   0x00030000 -> 0x00030000
  HighMem  0x00030000 -> 0x00040000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00040000
PERCPU: Embedded 7 pages/cpu @c1003000 s7712 r8192 d12768 u65536
pcpu-alloc: s7712 r8192 d12768 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: root=/dev/nfs rw
nfsroot=192.168.0.1:/tftpboot/hpcn/root/ p
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030864k/1048576k available (5228k kernel code, 17004k reserved,
196k d)
Kernel virtual memory layout:
  * 0xfffc1000..0xfffff000  : fixmap
  * 0xff800000..0xffc00000  : highmem PTEs
  * 0xff7da000..0xff800000  : early ioremap
  * 0xf1000000..0xff7da000  : vmalloc & ioremap
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512 nr_irqs:512
mpic: Setting up MPIC " MPIC     " version 1.2 at ffe40000, max 2 CPUs
mpic: ISU size: 256, shift: 8, mask: ff
mpic: Initializing for 256 sources
i8259 legacy interrupt controller initialized
clocksource: timebase mult[2800000] shift[22] registered
Console: colour dummy device 80x25
Mount-cache hash table entries: 512
mpic: requesting IPIs ...
Processor 1 found.
Brought up 2 CPUs
NET: Registered protocol family 16
            
PCI: Probing PCI hardware
pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:02:1d.0: unsupported PM cap regs version (4)
pci 0000:01:00.0: PCI bridge to [bus 02-ff] (subtractive decode)
pci 0001:03:00.0: ignoring class b20 (doesn't match header type 01)
pci 0001:03:00.0: PCI bridge to [bus 04-ff]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0:   bridge window [io  0x1000-0x1fff]
pci 0000:01:00.0:   bridge window [mem 0x80000000-0x800fffff]
pci 0000:01:00.0:   bridge window [mem pref disabled]
pci 0000:00:00.0: PCI bridge to [bus 01-02]
pci 0000:00:00.0:   bridge window [io  0x0000-0xffff]
pci 0000:00:00.0:   bridge window [mem 0x80000000-0x9fffffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
pci 0000:00:00.0: enabling device (0106 -> 0107)
pci 0001:03:00.0: PCI bridge to [bus 04-04]
pci 0001:03:00.0:   bridge window [io  0xfffee000-0xffffdfff]
pci 0001:03:00.0:   bridge window [mem 0xa0000000-0xbfffffff]
pci 0001:03:00.0:   bridge window [mem pref disabled]
pci 0001:03:00.0: enabling device (0106 -> 0107)
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.21.
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.144:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1502
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Generic non-volatile memory driver v1.1
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 28) is a 16550A
brd: module loaded
loop: module loaded
nbd: registered device at major 43
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@...0006000 port 0x80006100 irq 5
ata2: SATA max UDMA/133 abar m1024@...0006000 port 0x80006180 irq 5
ata3: SATA max UDMA/133 abar m1024@...0006000 port 0x80006200 irq 5
ata4: SATA max UDMA/133 abar m1024@...0006000 port 0x80006280 irq 5
scsi4 : pata_ali
scsi5 : pata_ali
ata5: PATA max UDMA/133 cmd 0x1200 ctl 0x1208 bmdma 0x1220 irq 14
ata6: PATA max UDMA/133 cmd 0x1210 ctl 0x1218 bmdma 0x1228 irq 14
eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:01
eth0: Running with NAPI enabled
eth0: :RX BD ring size for Q[0]: 256
eth0:TX BD ring size for Q[0]: 256
eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd
eth1: Running with NAPI enabled
eth1: :RX BD ring size for Q[0]: 256
eth1:TX BD ring size for Q[0]: 256
eth2: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:02:fd
eth2: Running with NAPI enabled
eth2: :RX BD ring size for Q[0]: 256
eth2:TX BD ring size for Q[0]: 256
eth3: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:03:fd
eth3: Running with NAPI enabled
eth3: :RX BD ring size for Q[0]: 256
eth3:TX BD ring size for Q[0]: 256
Freescale PowerQUICC MII Bus: probed
Freescale PowerQUICC MII Bus: probed
Freescale PowerQUICC MII Bus: probed
Freescale PowerQUICC MII Bus: probed
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:02:1c.3: EHCI Host Controller
ehci_hcd 0000:02:1c.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:1c.3: debug port 1
ehci_hcd 0000:02:1c.3: Enabling legacy PCI PM
ehci_hcd 0000:02:1c.3: irq 11, io mem 0x80003000
ehci_hcd 0000:02:1c.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:02:1c.0: OHCI Host Controller
ata5.00: ATAPI: SONY    DVD RW AW-Q170A, 1.73, max UDMA/66
ata5.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be
enabled
ata5.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs
node.
ata5.00: configured for UDMA/66
ohci_hcd 0000:02:1c.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:02:1c.0: irq 12, io mem 0x80000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:02:1c.1: OHCI Host Controller
ohci_hcd 0000:02:1c.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:1c.1: irq 9, io mem 0x80001000
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:02:1c.2: OHCI Host Controller
ohci_hcd 0000:02:1c.2: new USB bus registered, assigned bus number 4
scsi 4:0:0:0: CD-ROM            SONY     DVD RW AW-Q170A  1.73 PQ: 0 ANSI: 5
ohci_hcd 0000:02:1c.2: irq 10, io mem 0x80002000
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi generic sg0 type 5
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042.c: No controller found.
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel8x0_measure_ac97_clock: measured 50231 usecs (2424 samples)
intel8x0: clocking to 48000
ALSA device list:
  #0: ALi M5455 with ALC650F at irq 6
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
rtc_cmos rtc_cmos: setting system clock to 2002-03-11 18:46:05 UTC
(1015872365)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
Sending DHCP requests .
PHY: mdio@...24520:00 - Link is Up - 1000/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
., OK
IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.241
IP-Config: Complete:
     device=eth0, addr=192.168.0.241, mask=255.255.255.0, gw=192.168.0.1,
     host=192.168.0.241, domain=Radstone.Local, nis-domain=(none),
     bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem) on device 0:13.
Freeing unused kernel memory: 220k init
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying
nfs: server 192.168.0.1 not responding, still trying



-- 
Martyn Welch (Principal Software Engineer)   |   Registered in England and
GE Intelligent Platforms                     |   Wales (3828642) at 100
T +44(0)127322748                            |   Barbirolli Square, Manchester,
E martyn.welch@...com                        |   M2 3AB  VAT:GB 927559189

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists