| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100225153901.GA2660@darkstar>
Date: Thu, 25 Feb 2010 23:39:02 +0800
From: Dave Young <hidave.darkstar@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Ingo Molnar <mingo@...e.hu>,
Greg Kroah-Hartman <gregkh@...e.de>,
Steven Rostedt <rostedt@...dmis.org>,
Frederic Weisbecker <fweisbec@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 01/07] kernel.h printk cleanup
Cleanup kernel.h printk related extern declarations, move to linux/printk.h
But due to lots of files need them, include printk.h in kernel.h just
for convinience. It can be thought as the first step of further cleanup.
Signed-off-by: Dave Young <hidave.darkstar@...il.com>
---
include/linux/kernel.h | 215 -----------------------------------------------
include/linux/printk.h | 221 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 222 insertions(+), 214 deletions(-)
--- linux-2.6.orig/include/linux/kernel.h 2010-02-25 20:41:26.000000000 +0800
+++ linux-2.6/include/linux/kernel.h 2010-02-25 20:43:08.000000000 +0800
@@ -7,15 +7,13 @@
#ifdef __KERNEL__
-#include <stdarg.h>
-#include <linux/linkage.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
-#include <linux/dynamic_debug.h>
+#include <linux/printk.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
@@ -87,31 +85,6 @@ extern const char linux_proc_banner[];
*/
#define lower_32_bits(n) ((u32)(n))
-#define KERN_EMERG "<0>" /* system is unusable */
-#define KERN_ALERT "<1>" /* action must be taken immediately */
-#define KERN_CRIT "<2>" /* critical conditions */
-#define KERN_ERR "<3>" /* error conditions */
-#define KERN_WARNING "<4>" /* warning conditions */
-#define KERN_NOTICE "<5>" /* normal but significant condition */
-#define KERN_INFO "<6>" /* informational */
-#define KERN_DEBUG "<7>" /* debug-level messages */
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT "<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT "<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
struct completion;
struct pt_regs;
struct user;
@@ -210,97 +183,9 @@ extern int func_ptr_is_kernel_text(void
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG "[Firmware Bug]: "
-#define FW_WARN "[Firmware Warn]: "
-#define FW_INFO "[Firmware Info]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2))) __cold;
-
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
-extern int printk_delay_msec;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({ \
- static bool __print_once; \
- \
- if (!__print_once) { \
- __print_once = true; \
- printk(x); \
- } \
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
- __attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
- unsigned int interval_msec) \
- { return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
- early_printk(const char *fmt, ...);
-
unsigned long int_sqrt(unsigned long);
-static inline void console_silent(void)
-{
- console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
- if (console_loglevel)
- console_loglevel = 15;
-}
-
extern void bust_spinlocks(int yes);
-extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
@@ -361,93 +246,6 @@ static inline char *pack_hex_byte(char *
return buf;
}
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
- printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
- printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
- printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
- printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
- printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice(fmt, ...) \
- printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
- printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
- printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
- dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...) ({ \
- static struct ratelimit_state _rs = { \
- .interval = DEFAULT_RATELIMIT_INTERVAL, \
- .burst = DEFAULT_RATELIMIT_BURST, \
- }; \
- \
- if (!__ratelimit(&_rs)) \
- printk(fmt, ##__VA_ARGS__); \
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
- ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
- ##__VA_ARGS__); 0; })
-#endif
-
/*
* General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop
@@ -585,17 +383,6 @@ static inline void ftrace_dump(void) { }
#endif /* CONFIG_TRACING */
/*
- * Display an IP address in readable format.
- */
-
-#define NIPQUAD(addr) \
- ((unsigned char *)&addr)[0], \
- ((unsigned char *)&addr)[1], \
- ((unsigned char *)&addr)[2], \
- ((unsigned char *)&addr)[3]
-#define NIPQUAD_FMT "%u.%u.%u.%u"
-
-/*
* min()/max()/clamp() macros that also do
* strict type-checking.. See the
* "unnecessary" pointer comparison.
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/include/linux/printk.h 2010-02-25 20:44:48.000000000 +0800
@@ -0,0 +1,221 @@
+#ifndef _PRINTK_H
+#define _PRINTK_H
+
+#include <stdarg.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/dynamic_debug.h>
+
+#define KERN_EMERG "<0>" /* system is unusable */
+#define KERN_ALERT "<1>" /* action must be taken immediately */
+#define KERN_CRIT "<2>" /* critical conditions */
+#define KERN_ERR "<3>" /* error conditions */
+#define KERN_WARNING "<4>" /* warning conditions */
+#define KERN_NOTICE "<5>" /* normal but significant condition */
+#define KERN_INFO "<6>" /* informational */
+#define KERN_DEBUG "<7>" /* debug-level messages */
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT "<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char *fmt, ...)
+ __attribute__ ((format (printf, 1, 2))) __cold;
+
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
+
+extern int printk_delay_msec;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({ \
+ static bool __print_once; \
+ \
+ if (!__print_once) { \
+ __print_once = true; \
+ printk(x); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+ __attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+ unsigned int interval_msec) \
+ { return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+ early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+ console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+ if (console_loglevel)
+ console_loglevel = 15;
+}
+
+extern void wake_up_klogd(void);
+
+/*
+ * Display an IP address in readable format.
+ */
+
+#define NIPQUAD(addr) \
+ ((unsigned char *)&addr)[0], \
+ ((unsigned char *)&addr)[1], \
+ ((unsigned char *)&addr)[2], \
+ ((unsigned char *)&addr)[3]
+#define NIPQUAD_FMT "%u.%u.%u.%u"
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice(fmt, ...) \
+ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static struct ratelimit_state _rs = { \
+ .interval = DEFAULT_RATELIMIT_INTERVAL, \
+ .burst = DEFAULT_RATELIMIT_BURST, \
+ }; \
+ \
+ if (!__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists