[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9F4C7D19E8361D4C94921B95BE08B81BC93E3A@zin33exm22.fsl.freescale.net>
Date: Fri, 26 Feb 2010 10:28:46 +0530
From: "Kumar Gopalpet-B05799" <B05799@...escale.com>
To: <avorontsov@...mvista.com>,
"Paul Gortmaker" <paul.gortmaker@...driver.com>
Cc: "Martyn Welch" <martyn.welch@...com>,
"linuxppc-dev list" <linuxppc-dev@...abs.org>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<davem@...emloft.net>, "Kumar Gala" <galak@...nel.crashing.org>
Subject: RE: Gianfar driver failing on MPC8641D based board
>-----Original Message-----
>From: Anton Vorontsov [mailto:avorontsov@...mvista.com]
>Sent: Friday, February 26, 2010 8:45 AM
>To: Paul Gortmaker
>Cc: Martyn Welch; linuxppc-dev list; netdev@...r.kernel.org;
>linux-kernel@...r.kernel.org; Kumar Gopalpet-B05799;
>davem@...emloft.net; Kumar Gala
>Subject: Re: Gianfar driver failing on MPC8641D based board
>
>On Thu, Feb 25, 2010 at 07:53:30PM -0500, Paul Gortmaker wrote:
>[...]
>> I was able to reproduce it on an 8641D and bisected it down to this:
>>
>> -----------
>> commit a3bc1f11e9b867a4f49505ecac486a33af248b2e
>> Author: Anton Vorontsov <avorontsov@...mvista.com>
>> Date: Tue Nov 10 14:11:10 2009 +0000
>>
>> gianfar: Revive SKB recycling
>
>Thanks for the bisect. I have a guess why tx hangs in SMP
>case. Could anyone try the patch down below?
>
>[...]
>> ...which probably explains why you weren't seeing it on non-SMP.
>> I'd imagine it would show up on any of the e500mc boards too.
>
>Yeah.. Pity, I don't have SMP boards anymore. I'll try to get
>one though.
>
>
>diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
>index 8bd3c9f..3ff3bd0 100644
>--- a/drivers/net/gianfar.c
>+++ b/drivers/net/gianfar.c
>@@ -2614,6 +2614,8 @@ static int gfar_poll(struct napi_struct
>*napi, int budget)
> tx_queue = priv->tx_queue[rx_queue->qindex];
>
> tx_cleaned += gfar_clean_tx_ring(tx_queue);
>+ if (!tx_cleaned && !tx_queue->num_txbdfree)
>+ tx_cleaned += 1; /* don't
>complete napi */
> rx_cleaned_per_queue =
>gfar_clean_rx_ring(rx_queue,
>
>budget_per_queue);
> rx_cleaned += rx_cleaned_per_queue;
>
Anton,
There is also one more issue that I have been observing with the patch
"gianfar: Revive SKB recycling".
The issue is when I do a IPV4 forwarding test scenario with
bidirectional flows (SMP environment). I am using Spirent smart bits
(smartflow) for automation testing and I frequently observe smart flow
reporting "Rx packet counte greater than Tx packet count. Duplicate
packets might have been received".
To just get over the issue I have removed this patch and I didn't see
the issue.
To a certain extent I could get over the problem by using atomic_t for
num_txbdfree (atomic_add and atomic_dec instructions for updating the
num_txbdfree) and completely removing the spin_locks in the tx routines.
Also, I feel we might want to make some more changes to the
gfar_clean_tx_ring( ) and gfar_start_xmit() routines so that they can
operate parallely.
I am really sorry for not posting it a bit earlier as I am caught up
with some urgent issues.
--
Thanks
Sandeep
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists