Linux version 2.6.33-bmg (root@hermione) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #1 SMP Sun Feb 28 22:29:50 CET 2010 Command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable) BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data) BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI 2.3 present. No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcfff0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000f4a20] f4a20 init_memory_mapping: 0000000000000000-00000000cfff0000 init_memory_mapping: 0000000100000000-0000000130000000 ACPI: RSDP 00000000000f6380 00014 (v00 GBT ) ACPI: RSDT 00000000cfff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) ACPI: FACP 00000000cfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) ACPI: DSDT 00000000cfff30c0 04A61 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) ACPI: FACS 00000000cfff0000 00040 ACPI: SSDT 00000000cfff7c00 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000cfff7ec0 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) ACPI: MCFG 00000000cfff7f00 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) ACPI: APIC 00000000cfff7b40 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) (12 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00015c0be0] TEXT DATA BSS ==> [0001000000 - 00015c0be0] #2 [00015c1000 - 00015c108a] BRK ==> [00015c1000 - 00015c108a] #3 [00000f4a30 - 0000100000] BIOS reserved ==> [00000f4a30 - 0000100000] #4 [00000f4a20 - 00000f4a30] MP-table mpf ==> [00000f4a20 - 00000f4a30] #5 [000009f800 - 00000f0f00] BIOS reserved ==> [000009f800 - 00000f0f00] #6 [00000f103c - 00000f4a20] BIOS reserved ==> [00000f103c - 00000f4a20] #7 [00000f0f00 - 00000f103c] MP-table mpc ==> [00000f0f00 - 00000f103c] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #10 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #11 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000cfff0 0: 0x00100000 -> 0x00130000 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfff0000 - 00000000cfff3000 PM: Registered nosave memory: 00000000cfff3000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:10000000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76376 r8192 d21928 u524288 pcpu-alloc: s76376 r8192 d21928 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031332 Kernel command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 3989292k/4980736k available (3437k kernel code, 786884k absent, 203580k reserved, 1575k data, 408k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Fast TSC calibration using PIT Detected 2613.235 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5226.47 BogoMIPS (lpj=2613235) Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01 Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (10452.33 BogoMIPS). NET: Registered protocol family 16 TOM: 00000000d0000000 aka 3328M TOM2: 0000000130000000 aka 4864M ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:0f.0: PCI bridge to [bus 02-02] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized PCI: Using ACPI for IRQ routing Switching to clocksource jiffies pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1080-0x10ff] has been reserved system 00:01: [io 0x1400-0x147f] has been reserved system 00:01: [io 0x1480-0x14ff] has been reserved system 00:01: [io 0x1800-0x187f] has been reserved system 00:01: [io 0x1880-0x18ff] has been reserved system 00:01: [mem 0xd0000000-0xdfffffff] has been reserved system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0800-0x087f] has been reserved system 00:02: [io 0x0295-0x0314] has been reserved system 00:02: [io 0x0290-0x0294] has been reserved system 00:0c: [mem 0xf0000000-0xf7ffffff] has been reserved system 00:0d: [mem 0x000cde00-0x000cffff] has been reserved system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved system 00:0d: [mem 0xcfff0000-0xcfffffff] could not be reserved system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x00100000-0xcffeffff] could not be reserved system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved Switching to clocksource acpi_pm pci 0000:00:06.0: PCI bridge to [bus 01-01] pci 0000:00:06.0: bridge window [io 0x8000-0x9fff] pci 0000:00:06.0: bridge window [mem 0xfb000000-0xfb0fffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 6: assigned [mem 0xfa000000-0xfa01ffff pref] pci 0000:00:0f.0: PCI bridge to [bus 02-02] pci 0000:00:0f.0: bridge window [io 0xa000-0xafff] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfaffffff] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:05.1: Enabling HT MSI Mapping pci 0000:00:06.0: Enabling HT MSI Mapping pci 0000:00:06.1: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture HugeTLB registered 2 MB page size, pre-allocated 0 pages fuse init (API version 7.13) msgmni has been set to 7922 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 nvidiafb 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de0392 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1280 x 1024 nvidiafb: Panel is TMDS nvidiafb: MTRR set to ON nvidiafb: Flat panel dithering disabled Console: switching to colour frame buffer device 160x64 nvidiafb: PCI nVidia NV39 framebuffer (64MB @ 0xE0000000) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] hpet_acpi_add: no address or irqs in _CRS Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 serial 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 0000:01:08.0: ttyS1 at I/O 0x8000 (irq = 16) is a 16550A 0000:01:08.0: ttyS2 at I/O 0x8400 (irq = 16) is a 16550A loop: module loaded ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:05.0: Using SWNCQ mode scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc400 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc408 irq 23 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:05.1: Using SWNCQ mode scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd800 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd808 irq 22 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller SCTP: Hash tables configured (established 65536 bind 65536) rtc_cmos 00:05: setting system clock to 2010-02-28 21:47:07 UTC (1267393627) ata5.00: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66 ata5.00: configured for UDMA/66 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: HPA detected: current 62531183, native 62533296 ata1.00: ATA-8: OCZ-VERTEX, 1.5, max UDMA/133 ata1.00: 62531183 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX 1.5 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 62531183 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ata3.00: HPA detected: current 625140335, native 625142448 ata3.00: ATA-7: WDC WD3200AAKS-75SBA0, 12.01B01, max UDMA/133 ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: HPA detected: current 625140335, native 625142448 ata2.00: ATA-7: WDC WD3200AAKS-75SBA0, 12.01B01, max UDMA/133 ata2.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 12.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB) scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 12.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc9 > sdb: sd 2:0:0:0: [sdc] Attached SCSI disk sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 > sd 1:0:0:0: [sdb] Attached SCSI disk ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: HPA detected: current 1953523055, native 1953525168 ata4.00: ATA-8: WDC WD10EACS-07D6B1, 01.01A01, max UDMA/133 ata4.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA WDC WD10EACS-07D 01.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk EXT4-fs (sda2): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:2. Freeing unused kernel memory: 408k freed BUG: unable to handle kernel paging request at ffffffffa001b57f IP: [] strcmp+0xb/0x30 PGD 1498067 PUD 149c063 PMD 12daf2067 PTE 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/type CPU 1 Pid: 1249, comm: modprobe Not tainted 2.6.33-bmg #1 M55S-S3/ RIP: 0010:[] [] strcmp+0xb/0x30 RSP: 0018:ffff88012ebe9e58 EFLAGS: 00010282 RAX: 0000000000000070 RBX: ffff88012f8f4f00 RCX: 00000000ffffffff RDX: ffff88012f808800 RSI: ffffffffa001b57f RDI: ffff88012fab2420 RBP: ffff88012ebe9e58 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800284017c0 R11: dead000000200200 R12: ffff88012f9a29c8 R13: ffff88012f8842a0 R14: ffffffffa001b57f R15: 000000000081c050 FS: 00007f16bd8916f0(0000) GS:ffff880028280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa001b57f CR3: 000000012da7c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1249, threadinfo ffff88012ebe8000, task ffff88012edec0a0) Stack: ffff88012ebe9e88 ffffffff811852e8 ffffffffa0013080 ffffffffa00130e0 <0> 000000000081e970 000000000081e970 ffff88012ebe9e98 ffffffff81236b87 <0> ffff88012ebe9ed8 ffffffff81236ca7 0000000000000021 0000000000000021 Call Trace: [] kset_find_obj+0x38/0x80 [] driver_find+0x17/0x30 [] driver_register+0x67/0x140 [] __pci_register_driver+0x51/0xd0 [] ? init_nic+0x0/0x20 [forcedeth] [] init_nic+0x1e/0x20 [forcedeth] IT8716 SuperIO detected. parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [] do_one_initcall+0x37/0x190 [] sys_init_module+0xd6/0x250 [] system_call_fastpath+0x16/0x1b Code: 0f b6 3e 48 ff c6 40 84 ff 40 88 39 74 0b 48 ff c1 48 ff ca 75 ea c6 01 00 c9 c3 0f 1f 44 00 00 55 48 89 e5 0f 1f 40 00 0f b6 07 <0f> b6 16 48 ff c7 48 ff c6 38 d0 75 08 84 c0 75 ec 31 c0 c9 c3 RIP [] strcmp+0xb/0x30 RSP CR2: ffffffffa001b57f ---[ end trace 78e3929c6cc33ef8 ]--- sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ------------[ cut here ]------------ WARNING: at lib/kobject.c:168 kobject_add_internal+0x1aa/0x1f0() Hardware name: kobject: (ffff88012cda1c18): attempted to be registered with empty name! Modules linked in: sg(+) snd_seq_device snd_timer snd sr_mod cdrom soundcore parport_pc(+) parport usbcore(+) forcedeth(+) snd_page_alloc Pid: 1455, comm: modprobe Tainted: G D 2.6.33-bmg #1 Call Trace: [] warn_slowpath_common+0x78/0xb0 [] warn_slowpath_fmt+0x3c/0x40 [] kobject_add_internal+0x1aa/0x1f0 [] kset_register+0x2f/0x60 [] __class_register+0xdc/0x1d0 [] __class_create+0x5f/0x90 [] ? init_sg+0x0/0xd0 [sg] [] init_sg+0x7a/0xd0 [sg] [] do_one_initcall+0x37/0x190 [] sys_init_module+0xd6/0x250 [] system_call_fastpath+0x16/0x1b ---[ end trace 78e3929c6cc33ef9 ]--- usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver