lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sun, 28 Feb 2010 15:51:03 -0800
From:	Yinghai Lu <yinghai@...nel.org>
To:	Linus Torvalds <torvalds@...ux-foundation.org>
CC:	Jesse Barnes <jbarnes@...tuousgeek.org>,
	"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [git pull] PCI changes for 2.6.34  -- pci_try_num

please check

[PATCH] pci: disable pci trying to reallocate pci bridge by default.

it broken Linus's Nouveau

bisected:to commit 977d17bb17
| PCI: update bridge resources to get more big ranges in PCI assign unssigned

so try disable it by default.

Signed-off-by: Yinghai Lu <yinghai@...nel.org>

---
 Documentation/kernel-parameters.txt |    6 ++++++
 drivers/pci/pci.c                   |    4 ++++
 drivers/pci/pci.h                   |    2 ++
 drivers/pci/setup-bus.c             |   14 +++++++++-----
 4 files changed, 21 insertions(+), 5 deletions(-)

Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt
+++ linux-2.6/Documentation/kernel-parameters.txt
@@ -1963,6 +1963,12 @@ and is between 256 and 4096 characters.
 				for broken drivers that don't call it.
 		skip_isa_align	[X86] do not align io start addr, so can
 				handle more pci cards
+		try=n		set the pci_try_num to reallocate the pci bridge resource
+				1: default
+				2: will set the num to max_depth, and try to reallocate res
+				   to get big range for the bridge. assume the pci peer root
+				   resource is right from _CRS or from hostbridge pci reg
+				   reading out.
 		firmware	[ARM] Do not re-enumerate the bus but instead
 				just use the configuration from the
 				bootloader. This is currently used on
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -2974,6 +2974,10 @@ static int __init pci_setup(char *str)
 				pci_no_aer();
 			} else if (!strcmp(str, "nodomains")) {
 				pci_no_domains();
+			} else if (!strncmp(str, "try=", 4)) {
+				int try_num = memparse(str + 4, &str);
+				if (try_num > 0)
+					pci_try_num = try_num;
 			} else if (!strncmp(str, "cbiosize=", 9)) {
 				pci_cardbus_io_size = memparse(str + 9, &str);
 			} else if (!strncmp(str, "cbmemsize=", 10)) {
Index: linux-2.6/drivers/pci/pci.h
===================================================================
--- linux-2.6.orig/drivers/pci/pci.h
+++ linux-2.6/drivers/pci/pci.h
@@ -212,6 +212,8 @@ static inline int pci_ari_enabled(struct
 	return bus->self && bus->self->ari_enabled;
 }
 
+extern int pci_try_num;
+
 #ifdef CONFIG_PCI_QUIRKS
 extern int pci_is_reassigndev(struct pci_dev *dev);
 resource_size_t pci_specified_resource_alignment(struct pci_dev *dev);
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -869,6 +869,7 @@ static int __init pci_get_max_depth(void
  * second  and later try will clear small leaf bridge res
  * will stop till to the max  deepth if can not find good one
  */
+int pci_try_num = 1;
 void __init
 pci_assign_unassigned_resources(void)
 {
@@ -879,14 +880,17 @@ pci_assign_unassigned_resources(void)
 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
 				  IORESOURCE_PREFETCH;
 	unsigned long failed_type;
-	int max_depth = pci_get_max_depth();
-	int pci_try_num;
 
 	head.next = NULL;
 
-	pci_try_num = max_depth + 1;
-	printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
-		 max_depth, pci_try_num);
+	if (pci_try_num > 1) {
+		int max_depth = pci_get_max_depth();
+
+		if (max_depth + 1 > pci_try_num)
+			pci_try_num = max_depth + 1;
+		printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+			 max_depth, pci_try_num);
+	}
 
 again:
 	/* Depth first, calculate sizes and alignments of all
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists