| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201003010955.40981.hartleys@visionengravers.com>
Date: Mon, 1 Mar 2010 09:55:40 -0700
From: H Hartley Sweeten <hartleys@...ionengravers.com>
To: Linux Kernel <linux-kernel@...r.kernel.org>
Cc: greg@...ah.com, ss@....gov.au
Subject: [PATCH] dt3155: replace {Write | Read}MReg with {write | read}l
The WriteMReg and ReadMReg macros are really just renamed versions
of writel and readl. Use the kernel provided versions instead.
Also, the ioremap returns a void __iomem * not a u8 *. Fix all the users
of dt3155_lbase to reflect this.
Signed-off-by: H Hartley Sweeten <hsweeten@...ionengravers.com>
Cc: Greg Kroah-Hartman <greg@...ah.com>
Cc: Scott Smedley <ss@....gov.au>
---
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index a67c622..c0f8abf 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -122,7 +122,7 @@ int dt3155_major = 0;
struct dt3155_status_s dt3155_status[ MAXBOARDS ];
/* kernel logical address of the board */
-u8 *dt3155_lbase[ MAXBOARDS ] = { NULL
+void __iomem *dt3155_lbase[MAXBOARDS] = { NULL
#if MAXBOARDS == 2
, NULL
#endif
@@ -149,11 +149,11 @@ static void quick_stop (int minor)
{
// TODO: scott was here
#if 1
- ReadMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ int_csr_r.reg = readl(dt3155_lbase[minor] + INT_CSR);
/* disable interrupts */
int_csr_r.fld.FLD_END_EVE_EN = 0;
int_csr_r.fld.FLD_END_ODD_EN = 0;
- WriteMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
dt3155_status[ minor ].state &= ~(DT3155_STATE_STOP|0xff);
/* mark the system stopped: */
@@ -198,7 +198,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
/* Check for corruption and set a flag if so */
- ReadMReg( (dt3155_lbase[ minor ] + CSR1), csr1_r.reg );
+ csr1_r.reg = readl(dt3155_lbase[minor] + CSR1);
if ( (csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD) )
{
@@ -210,7 +210,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
return;
}
- ReadMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ int_csr_r.reg = readl(dt3155_lbase[minor] + INT_CSR);
/* Handle the even field ... */
if (int_csr_r.fld.FLD_END_EVE)
@@ -221,7 +221,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
dt3155_fbuffer[ minor ]->frame_count++;
}
- ReadI2C(dt3155_lbase[ minor ], EVEN_CSR, &i2c_even_csr.reg);
+ ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
/* Clear the interrupt? */
int_csr_r.fld.FLD_END_EVE = 1;
@@ -241,7 +241,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
}
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
/* Set up next DMA if we are doing FIELDS */
if ( (dt3155_status[ minor ].state & DT3155_STATE_MODE ) ==
@@ -259,7 +259,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
/* Set up the DMA address for the next field */
local_irq_restore(flags);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START), buffer_addr);
+ writel(buffer_addr, dt3155_lbase[minor] + ODD_DMA_START);
}
/* Check for errors. */
@@ -267,7 +267,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
if ( i2c_even_csr.fld.ERROR_EVE )
dt3155_errno = DT_ERR_OVERRUN;
- WriteI2C( dt3155_lbase[ minor ], EVEN_CSR, i2c_even_csr.reg );
+ WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
/* Note that we actually saw an even field meaning */
/* that subsequent odd field complete the frame */
@@ -284,7 +284,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
/* ... now handle the odd field */
if ( int_csr_r.fld.FLD_END_ODD )
{
- ReadI2C( dt3155_lbase[ minor ], ODD_CSR, &i2c_odd_csr.reg );
+ ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
/* Clear the interrupt? */
int_csr_r.fld.FLD_END_ODD = 1;
@@ -320,7 +320,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
}
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
/* if the odd field has been acquired, then */
/* change the next dma location for both fields */
@@ -395,16 +395,13 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
buffer_addr = dt3155_fbuffer[ minor ]->
frame_info[ dt3155_fbuffer[ minor ]->active_buf ].addr;
if ( (dt3155_status[ minor ].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD )
- {
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START), buffer_addr);
- }
- else
- {
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START), buffer_addr);
+ DT3155_STATE_FLD ) {
+ writel(buffer_addr, dt3155_lbase[minor] + EVEN_DMA_START);
+ } else {
+ writel(buffer_addr, dt3155_lbase[minor] + EVEN_DMA_START);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START), buffer_addr
- + dt3155_status[ minor ].config.cols);
+ writel(buffer_addr + dt3155_status[minor].config.cols,
+ dt3155_lbase[minor] + ODD_DMA_START);
}
/* Do error checking */
@@ -412,7 +409,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
if ( i2c_odd_csr.fld.ERROR_ODD )
dt3155_errno = DT_ERR_OVERRUN;
- WriteI2C(dt3155_lbase[ minor ], ODD_CSR, i2c_odd_csr.reg );
+ WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
return;
}
@@ -439,12 +436,9 @@ static void dt3155_init_isr(int minor)
even_dma_stride_r = 0;
odd_dma_stride_r = 0;
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START),
- even_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_STRIDE),
- even_dma_stride_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_STRIDE),
- odd_dma_stride_r);
+ writel(even_dma_start_r, dt3155_lbase[minor] + EVEN_DMA_START);
+ writel(even_dma_stride_r, dt3155_lbase[minor] + EVEN_DMA_STRIDE);
+ writel(odd_dma_stride_r, dt3155_lbase[minor] + ODD_DMA_STRIDE);
break;
}
@@ -457,14 +451,10 @@ static void dt3155_init_isr(int minor)
even_dma_stride_r = stride;
odd_dma_stride_r = stride;
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START),
- even_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START),
- odd_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_STRIDE),
- even_dma_stride_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_STRIDE),
- odd_dma_stride_r);
+ writel(even_dma_start_r, dt3155_lbase[minor] + EVEN_DMA_START);
+ writel(odd_dma_start_r, dt3155_lbase[minor] + ODD_DMA_START);
+ writel(even_dma_stride_r, dt3155_lbase[minor] + EVEN_DMA_STRIDE);
+ writel(odd_dma_stride_r, dt3155_lbase[minor] + ODD_DMA_STRIDE);
break;
}
}
@@ -472,9 +462,9 @@ static void dt3155_init_isr(int minor)
/* 50/60 Hz should be set before this point but let's make sure it is */
/* right anyway */
- ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[minor], CONFIG, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
- WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+ WriteI2C(dt3155_lbase[minor], CONFIG, i2c_config.reg);
/* enable busmaster chip, clear flags */
@@ -494,7 +484,7 @@ static void dt3155_init_isr(int minor)
csr1_r.fld.FLD_CRPT_EVE = 1; /* writing a 1 clears flags */
csr1_r.fld.FLD_CRPT_ODD = 1;
- WriteMReg((dt3155_lbase[ minor ] + CSR1),csr1_r.reg);
+ writel(csr1_r.reg, dt3155_lbase[minor] + CSR1);
/* Enable interrupts at the end of each field */
@@ -503,14 +493,14 @@ static void dt3155_init_isr(int minor)
int_csr_r.fld.FLD_END_ODD_EN = 1;
int_csr_r.fld.FLD_START_EN = 0;
- WriteMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
/* start internal BUSY bits */
- ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
i2c_csr2.fld.BUSY_ODD = 1;
i2c_csr2.fld.BUSY_EVE = 1;
- WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
+ WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
/* Now its up to the interrupt routine!! */
@@ -718,7 +708,7 @@ static int dt3155_open( struct inode* inode, struct file* filep)
/* Disable ALL interrupts */
int_csr_r.reg = 0;
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
@@ -909,12 +899,10 @@ static int find_PCI (void)
/* Remap the base address to a logical address through which we
* can access it. */
- dt3155_lbase[ pci_index - 1 ] = ioremap(base,PCI_PAGE_SIZE);
- dt3155_status[ pci_index - 1 ].reg_addr = base;
+ dt3155_lbase[pci_index-1] = ioremap(base, PCI_PAGE_SIZE);
DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
dt3155_lbase[pci_index-1]);
- if ( !dt3155_lbase[pci_index-1] )
- {
+ if (!dt3155_lbase[pci_index-1]) {
printk("DT3155: Unable to remap control registers\n");
goto err;
}
@@ -1034,7 +1022,7 @@ int init_module(void)
int_csr_r.reg = 0;
for( index = 0; index < ndevices; index++ )
{
- WriteMReg( (dt3155_lbase[ index ] + INT_CSR), int_csr_r.reg );
+ writel(int_csr_r.reg, dt3155_lbase[index] + INT_CSR);
if( dt3155_status[ index ].device_installed )
{
/*
diff --git a/drivers/staging/dt3155/dt3155_io.c b/drivers/staging/dt3155/dt3155_io.c
index 6b9c685..a6da0cd 100644
--- a/drivers/staging/dt3155/dt3155_io.c
+++ b/drivers/staging/dt3155/dt3155_io.c
@@ -79,7 +79,7 @@ u8 i2c_pm_lut_data;
* Returns FALSE if NEW_CYCLE doesn't clear in roughly 3 msecs, otherwise
* returns 0
*/
-static int wait_ibsyclr(u8 *lpReg)
+static int wait_ibsyclr(void __iomem *lpReg)
{
/* wait 100 microseconds */
udelay(100L);
@@ -105,13 +105,13 @@ static int wait_ibsyclr(u8 *lpReg)
* Returns TRUE - Successful completion
* FALSE - Timeout error - cycle did not complete!
*/
-int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
+int WriteI2C(void __iomem *lpReg, u_short wIregIndex, u8 byVal)
{
int writestat; /* status for return */
/* read 32 bit IIC_CSR2 register data into union */
- ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+ iic_csr2_r.reg = readl(lpReg + IIC_CSR2);
/* for write operation */
iic_csr2_r.fld.DIR_RD = 0;
@@ -123,7 +123,7 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
iic_csr2_r.fld.NEW_CYCLE = 1;
/* xfer union data into 32 bit IIC_CSR2 register */
- WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+ writel(iic_csr2_r.reg, lpReg + IIC_CSR2);
/* wait for IIC cycle to finish */
writestat = wait_ibsyclr(lpReg);
@@ -142,12 +142,12 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
* Returns TRUE - Successful completion
* FALSE - Timeout error - cycle did not complete!
*/
-int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
+int ReadI2C(void __iomem *lpReg, u_short wIregIndex, u8 *byVal)
{
int writestat; /* status for return */
/* read 32 bit IIC_CSR2 register data into union */
- ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+ iic_csr2_r.reg = readl(lpReg + IIC_CSR2);
/* for read operation */
iic_csr2_r.fld.DIR_RD = 1;
@@ -159,14 +159,14 @@ int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
iic_csr2_r.fld.NEW_CYCLE = 1;
/* xfer union's data into 32 bit IIC_CSR2 register */
- WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+ writel(iic_csr2_r.reg, lpReg + IIC_CSR2);
/* wait for IIC cycle to finish */
writestat = wait_ibsyclr(lpReg);
/* Next 2 commands read 32 bit IIC_CSR1 register's data into union */
/* first read data is in IIC_CSR1 */
- ReadMReg((lpReg + IIC_CSR1), iic_csr1_r.reg);
+ iic_csr1_r.reg = readl(lpReg + IIC_CSR1);
/* now get data u8 out of register */
*byVal = (u8) iic_csr1_r.fld.RD_DATA;
diff --git a/drivers/staging/dt3155/dt3155_io.h b/drivers/staging/dt3155/dt3155_io.h
index d1a2510..08f416a 100644
--- a/drivers/staging/dt3155/dt3155_io.h
+++ b/drivers/staging/dt3155/dt3155_io.h
@@ -34,11 +34,6 @@ MA 02111-1307 USA
#ifndef DT3155_IO_INC
#define DT3155_IO_INC
-/* macros to access registers */
-
-#define WriteMReg(Address, Data) (*((u32 *)(Address)) = Data)
-#define ReadMReg(Address, Data) (Data = *((u32 *)(Address)))
-
/***************** 32 bit register globals **************/
/* offsets for 32-bit memory mapped registers */
@@ -352,7 +347,7 @@ extern u8 i2c_pm_lut_data;
/* access 8-bit IIC registers */
-extern int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal);
-extern int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal);
+extern int ReadI2C(void __iomem *lpReg, u_short wIregIndex, u8 *byVal);
+extern int WriteI2C(void __iomem *lpReg, u_short wIregIndex, u8 byVal);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists