[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87vddfbvpc.fsf@deeprootsystems.com>
Date: Mon, 01 Mar 2010 13:03:59 -0800
From: Kevin Hilman <khilman@...prootsystems.com>
To: "Karicheri\, Muralidharan" <m-karicheri2@...com>
Cc: "davinci-linux-open-source\@linux.davincidsp.com"
<davinci-linux-open-source@...ux.davincidsp.com>,
"linux-kernel\@vger.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [GIT PULL] davinci platform updates for 2.6.34
"Karicheri, Muralidharan" <m-karicheri2@...com> writes:
> The arch part (shown below) of the vpfe capture driver on DM365 is
> already part of Mauro's request to Linus as we had agreed before. So
> please drop it from your request.
Murali,
This was intentional, and will not cause any problems since we sorted
this out for linux-next. It's in my tree also to address dependencies
and avoid merge conflicts in linux-next.
Linus has already merged Mauro's tree, so if/when he merges mine, git
will figure it out and "do the right thing."
Kevin
> Murali Karicheri (1):
> DaVinci - Adding platform & board changes for vpfe capture on DM365
>
>
> Here is the request from Mauro for 2.6.33.rc1 that has the above arch part.
>
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg16109.html
>
>
> Murali Karicheri
> Software Design Engineer
> Texas Instruments Inc.
> Germantown, MD 20874
> phone: 301-407-9583
> email: m-karicheri2@...com
>
>>-----Original Message-----
>>From: davinci-linux-open-source-bounces@...ux.davincidsp.com
>>[mailto:davinci-linux-open-source-bounces@...ux.davincidsp.com] On Behalf
>>Of Kevin Hilman
>>Sent: Monday, March 01, 2010 1:28 PM
>>To: Linus Torvalds
>>Cc: davinci-linux-open-source@...ux.davincidsp.com; linux-
>>kernel@...r.kernel.org
>>Subject: [GIT PULL] davinci platform updates for 2.6.34
>>
>>Linus,
>>
>>Please pull the following changes for the TI davinci platform.
>>
>>Note that the drivers/net changes are Acked by David Miller but we
>>agreed to merge them via my tree to keep them along with other
>>relevant platform changes for the davinci driver.
>>
>>Also, the last 5 or so patches were rebased today from what has been
>>in linux-next, but it was only to fixup one changelog and add a missing
>>signoff.
>>
>>Thanks,
>>
>>Kevin
>>
>>The following changes since commit
>>abe94c756c08d50566c09a65b9c7fe72f83071c5:
>> Linus Torvalds (1):
>> Linux 2.6.33-rc6
>>
>>are available in the git repository at:
>>
>> ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-
>>davinci.git davinci-for-linus
>>
>>Chaithrika U S (1):
>> davinci: clock: Check CLK_PSC flag before disabling PSC
>>
>>Kevin Hilman (2):
>> davinci: clkdev cleanup: remove clk_lookup wrapper, use
>>clkdev_add_table()
>> davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup
>>
>>Miguel Aguilar (1):
>> DaVinci: DM365: Voice codec support for the DM365 SoC
>>
>>Murali Karicheri (1):
>> DaVinci - Adding platform & board changes for vpfe capture on DM365
>>
>>Nageswari Srinivasan (2):
>> davinci: add support for CDCE949 clock synthesizer
>> davinci: add CDCE949 support on DM6467 EVM
>>
>>Philby John (1):
>> Add SDA and SCL pin numbers to i2c platform data
>>
>>Sandeep Paulraj (5):
>> DaVinci: DM365: Changing default queue for DM365.
>> DaVinci: SPI: Adding header file for SPI support.
>> DaVinci DM355: Modifications to DM355 SPI support
>> DaVinci DM365: Adding DM365 SPI support
>> DaVinci DM365: Adding support for SPI EEPROM
>>
>>Sekhar Nori (17):
>> davinci: da8xx/omapl1: add support for the second sysconfig module
>> davinci: move PLL wait time values to clock.h
>> davinci: move DDR2 controller defines to memory.h
>> davinci: move PSC register definitions from psc.c to psc.h
>> davinci: make it possible to include clock.h and psc.h in assembly
>>code
>> davinci: cpuidle: move mapping of DDR2 controller registers out of
>>driver
>> davinci: da850/omap-l138: unlock PLL registers during init
>> davinci: da850/omap-l138: create static map for SRAM
>> davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h
>> davinci: board-dm646x-evm.c: arrange related code together
>> davinci: add support for DM6467T EVM
>> davinci: make /proc/davinci_clocks display multi-rooted clock tree
>> davinci: move /proc/davinci_clocks to debugfs
>> davinci: add power management support
>> davinci: da850/omap-l138: add support for SoC suspend
>> davinci: da850/omap-l138 EVM: register for suspend support
>> davinci: clock: let clk->set_rate function sleep
>>
>>Sriramakrishnan (3):
>> TI Davinci EMAC : Re-use driver for other platforms.
>> TI Davinci EMAC : add platform specific interrupt enable/disable
>>logic.
>> TI Davinci EMAC : Abstract Buffer address translation logic.
>>
>>Sudhakar Rajashekhara (7):
>> davinci: da850/omap-l138: Modify NOR partition info
>> davinci: da850/omap-l138: Enable 4-bit ecc
>> davinci: Correct return value of edma_alloc_channel api
>> davinci: Keep count of channel controllers on a platform
>> davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case
>> davinci: build list of unused EDMA events dynamically
>> davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138
>>
>> arch/arm/mach-davinci/Kconfig | 4 +
>> arch/arm/mach-davinci/Makefile | 3 +-
>> arch/arm/mach-davinci/board-da830-evm.c | 4 +-
>> arch/arm/mach-davinci/board-da850-evm.c | 34 +++-
>> arch/arm/mach-davinci/board-dm355-evm.c | 2 +
>> arch/arm/mach-davinci/board-dm365-evm.c | 94 +++++++
>> arch/arm/mach-davinci/board-dm644x-evm.c | 2 +
>> arch/arm/mach-davinci/board-dm646x-evm.c | 143 +++++++---
>> arch/arm/mach-davinci/cdce949.c | 293
>>++++++++++++++++++++
>> arch/arm/mach-davinci/clock.c | 93 +++----
>> arch/arm/mach-davinci/clock.h | 45 ++-
>> arch/arm/mach-davinci/common.c | 2 +-
>> arch/arm/mach-davinci/cpuidle.c | 38 +---
>> arch/arm/mach-davinci/da830.c | 10 +-
>> arch/arm/mach-davinci/da850.c | 90 +++++-
>> arch/arm/mach-davinci/devices-da8xx.c | 146 +++++++++-
>> arch/arm/mach-davinci/dm355.c | 49 ++--
>> arch/arm/mach-davinci/dm365.c | 213 ++++++++++++++-
>> arch/arm/mach-davinci/dm644x.c | 12 +-
>> arch/arm/mach-davinci/dm646x.c | 14 +-
>> arch/arm/mach-davinci/dma.c | 67 ++++-
>> arch/arm/mach-davinci/include/mach/cdce949.h | 19 ++
>> arch/arm/mach-davinci/include/mach/common.h | 2 +-
>> arch/arm/mach-davinci/include/mach/cpuidle.h | 1 +
>> arch/arm/mach-davinci/include/mach/da8xx.h | 18 +-
>> arch/arm/mach-davinci/include/mach/dm365.h | 11 +-
>> arch/arm/mach-davinci/include/mach/dm644x.h | 2 +-
>> arch/arm/mach-davinci/include/mach/dm646x.h | 4 +-
>> arch/arm/mach-davinci/include/mach/edma.h | 2 -
>> arch/arm/mach-davinci/include/mach/i2c.h | 2 +
>> arch/arm/mach-davinci/include/mach/memory.h | 5 +
>> arch/arm/mach-davinci/include/mach/mux.h | 3 +
>> arch/arm/mach-davinci/include/mach/pm.h | 54 ++++
>> arch/arm/mach-davinci/include/mach/psc.h | 15 +
>> arch/arm/mach-davinci/include/mach/spi.h | 44 +++
>> arch/arm/mach-davinci/include/mach/timex.h | 7 +-
>> arch/arm/mach-davinci/pm.c | 158 +++++++++++
>> arch/arm/mach-davinci/psc.c | 11 -
>> arch/arm/mach-davinci/sleep.S | 224 +++++++++++++++
>> drivers/net/Kconfig | 2 +-
>> drivers/net/davinci_emac.c | 55 +++--
>> .../mach/emac.h => include/linux/davinci_emac.h | 7 +-
>> 42 files changed, 1708 insertions(+), 296 deletions(-)
>> create mode 100644 arch/arm/mach-davinci/cdce949.c
>> create mode 100644 arch/arm/mach-davinci/include/mach/cdce949.h
>> create mode 100644 arch/arm/mach-davinci/include/mach/pm.h
>> create mode 100644 arch/arm/mach-davinci/include/mach/spi.h
>> create mode 100644 arch/arm/mach-davinci/pm.c
>> create mode 100644 arch/arm/mach-davinci/sleep.S
>> rename arch/arm/mach-davinci/include/mach/emac.h =>
>>include/linux/davinci_emac.h (83%)
>>_______________________________________________
>>Davinci-linux-open-source mailing list
>>Davinci-linux-open-source@...ux.davincidsp.com
>>http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists