| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6B62480106F2B34D8404CF2FDAA4D9EF71F64F68AF@CHN-HCLT-EVS06.HCLT.CORP.HCL.IN>
Date: Tue, 2 Mar 2010 09:54:27 +0530
From: "Srinivas Naga Venkatasatya Pasagadugula - ERS, HCL Tech"
<satyasrinivasp@....in>
To: Ilia Mirkin <imirkin@...m.mit.edu>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: mvsas panic
Hi,
Did you tried with latest mvsas patch submitted by me? If not try with attached patch and let me know if you have any issues.
Note: Apply this patch on 2.6.32 kernels.
--Srini.
-----Original Message-----
From: linux-scsi-owner@...r.kernel.org [mailto:linux-scsi-owner@...r.kernel.org] On Behalf Of Ilia Mirkin
Sent: Monday, March 01, 2010 8:58 AM
To: linux-scsi@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: mvsas panic
Hi,
I had earlier e-mailed about an apparent NCQ vs non-NCQ command issue
on this machine in mvsas/libsas that didn't get any attention
(http://kerneltrap.org/mailarchive/linux-scsi/2010/1/24/6725113), but
now I've run into a crash/panic issue as well... perhaps related which
is why I mention it.
Unfortunately I don't have a full backtrace, but I'm going to try to
reproduce it tonight with netconsole set up.
Attached is a screenshot of the crash; the visible part of the trace
goes something like
mvs_interrupt
mvs_64xx_isr
mvs_int_full
mvs_int_rx
scsi_io_completion
mvs_slot_compete
sas_ata_task_done
ata_qc_complete
__ata_qc_complete
ata_sg_clean
swiotlb_unmap_sg_attrs
... and then it cuts off.
After this the machine was completely unresponsive, didn't even ping.
Please let me know if you have any ideas for figuring out what's wrong
here, if there's something I should test, etc. I noticed that there
were a bunch of patches a few months ago for mvsas, but they were
never merged... should I try those? I checked the commits that went
into 2.6.33, that didn't seem to have any relevant changes to mvsas,
libsas, or libata core features, but I can try that too if you think
it's likely to help things out.
The workload that triggered this was just dd reading and writing
(simultaneously) to 11 of the disks (/dev/zero -> disk, disk ->
/dev/null, bs=1M).
Some information about the machine:
Supermicro X8DTE, 2x L5520 cpu, 24G ram (12G per cpu). Areca 1300ix-16
controller, with 12 drives attached.
Various virtualization features enabled in bios, like VT-d, SR-IOV,
etc (none of which I'm using, but wanted to play with at some point).
Boot log below.
lspci -vvvnx -s 07:00.0
07:00.0 0100: 17d3:1300 (rev 02)
Subsystem: 17d3:1300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 2: I/O ports at ec00 [size=128]
Region 4: Memory at fafff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at faf80000 [disabled] [size=256K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 2048 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: mvsas
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-gentoo-r1 (root@...rage) (gcc
version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Mon Jan 11
11:59:22 EST 2010
[ 0.000000] Command line: root=/dev/sda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
[ 0.000000] BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf760000 (usable)
[ 0.000000] BIOS-e820: 00000000bf76e000 - 00000000bf770000 type 9
[ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf77e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fbf00000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FC00000000 write-back
[ 0.000000] 1 base 0400000000 mask FE00000000 write-back
[ 0.000000] 2 base 0600000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 base 00BF800000 mask FFFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf760 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000096c00 (usable)
[ 0.000000] modified: 0000000000096c00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf760000 (usable)
[ 0.000000] modified: 00000000bf76e000 - 00000000bf770000 type 9
[ 0.000000] modified: 00000000bf770000 - 00000000bf77e000 (ACPI data)
[ 0.000000] modified: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] modified: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fbf00000 - 00000000ff000000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000640000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf760000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf760000 page 4k
[ 0.000000] kernel direct mapping tables up to bf760000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000640000000
[ 0.000000] 0100000000 - 0640000000 page 2M
[ 0.000000] kernel direct mapping tables up to 640000000 @ 13000-2d000
[ 0.000000] ACPI: RSDP 00000000000fa240 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf770100 00084 (v01 080809 XSDT1324
20090808 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v04 080809 FACP1324
20090808 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7704b0 058A5 (v02 1XDT6 1XDT6003
00000003 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf77e000 00040
[ 0.000000] ACPI: APIC 00000000bf770390 000D2 (v02 080809 APIC1324
20090808 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf770470 0003C (v01 080809 OEMMCFG
20090808 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf77e040 0007A (v01 080809 OEMB1324
20090808 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf77a4b0 001D0 (v02 080809 OEMSRAT
00000001 INTL 00000001)
[ 0.000000] ACPI: HPET 00000000bf77a680 00038 (v01 080809 OEMHPET
20090808 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf77e0c0 00128 (v01 AMI OEMDMAR
00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf781700 00363 (v01 DpgPmm CpuPm
00000012 INTL 20051117)
[ 0.000000] ACPI: EINJ 00000000bf77a6c0 00130 (v01 AMIER AMI_EINJ
20090808 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000bf77a850 00030 (v01 AMIER AMI_BERT
20090808 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000bf77a880 001B0 (v01 AMIER AMI_ERST
20090808 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000bf77aa30 000A8 (v01 AMIER AMI_HEST
20090808 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 5 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-340000000
[ 0.000000] SRAT: Node 1 PXM 1 340000000-640000000
[ 0.000000] NUMA: Allocated memnodemap from 28000 - 34840
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000340000000
[ 0.000000] NODE_DATA [0000000000034840 - 000000000003683f]
[ 0.000000] bootmap [0000000000100000 - 0000000000167fff] pages 68
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001852284] TEXT DATA BSS ==>
[0001000000 - 0001852284]
[ 0.000000] #3 [0000096c00 - 0000100000] BIOS reserved ==>
[0000096c00 - 0000100000]
[ 0.000000] #4 [0001853000 - 00018531b8] BRK ==>
[0001853000 - 00018531b8]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==>
[0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 0000028000] PGTABLE ==>
[0000013000 - 0000028000]
[ 0.000000] #7 [0000028000 - 0000034840] MEMNODEMAP ==>
[0000028000 - 0000034840]
[ 0.000000] Bootmem setup node 1 0000000340000000-0000000640000000
[ 0.000000] NODE_DATA [0000000340000000 - 0000000340001fff]
[ 0.000000] bootmap [0000000340002000 - 0000000340061fff] pages 60
[ 0.000000] (8 early reservations) ==> bootmem [0340000000 - 0640000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001852284] TEXT DATA BSS
[ 0.000000] #3 [0000096c00 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001853000 - 00018531b8] BRK
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE
[ 0.000000] #6 [0000013000 - 0000028000] PGTABLE
[ 0.000000] #7 [0000028000 - 0000034840] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD ->
[ffff880028600000-ffff880032dfffff] on node 0
[ 0.000000] [ffffea000b600000-ffffea0015dfffff] PMD ->
[ffff880340200000-ffff88034a9fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00640000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000096
[ 0.000000] 0: 0x00000100 -> 0x000bf760
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] 1: 0x00340000 -> 0x00640000
[ 0.000000] On node 0 totalpages: 3143398
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 144 pages reserved
[ 0.000000] DMA zone: 3774 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765848 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 3145728
[ 0.000000] Normal zone: 43008 pages used for memmap
[ 0.000000] Normal zone: 3102720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s83480
r8192 d23016 u262144
[ 0.000000] pcpu-alloc: s83480 r8192 d23016 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [1] 04 05 06 07
12 13 14 15
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on.
Total pages: 6199382
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 24735632k/26214400k available (4631k kernel
code, 1057896k absent, 420872k reserved, 2538k data, 452k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=16, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:536
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2260.970 MHz processor.
[ 0.000006] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4521.94 BogoMIPS (lpj=2260970)
[ 0.000530] Security Framework initialized
[ 0.003406] Dentry cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.016954] Inode-cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.020808] Mount-cache hash table entries: 256
[ 0.021223] Initializing cgroup subsys ns
[ 0.021483] Initializing cgroup subsys cpuacct
[ 0.021737] Initializing cgroup subsys freezer
[ 0.022005] CPU: Physical Processor ID: 0
[ 0.022259] CPU: Processor Core ID: 0
[ 0.022507] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.022798] CPU: L2 cache: 256K
[ 0.023045] CPU: L3 cache: 8192K
[ 0.023301] CPU 0/0x0 -> Node 0
[ 0.023549] mce: CPU supports 9 MCE banks
[ 0.023809] CPU0: Thermal monitoring enabled (TM1)
[ 0.024061] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.024579] using mwait in idle threads.
[ 0.024827] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.025166] ... version: 3
[ 0.025422] ... bit width: 48
[ 0.025670] ... generic registers: 4
[ 0.025917] ... value mask: 0000ffffffffffff
[ 0.026167] ... max period: 000000007fffffff
[ 0.026423] ... fixed-purpose events: 3
[ 0.026670] ... event mask: 000000070000000f
[ 0.026937] ACPI: Core revision 20090903
[ 0.058192] Setting APIC routing to physical flat
[ 0.058620] alloc irq_desc for 20 on node 0
[ 0.058622] alloc kstat_irqs on node 0
[ 0.058764] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068996] CPU0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.171048] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.181911] Initializing CPU#1
[ 0.241782] Calibrating delay using timer specific routine..
4521.21 BogoMIPS (lpj=2260606)
[ 0.241790] CPU: Physical Processor ID: 0
[ 0.241791] CPU: Processor Core ID: 1
[ 0.241794] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.241795] CPU: L2 cache: 256K
[ 0.241796] CPU: L3 cache: 8192K
[ 0.241799] CPU 1/0x2 -> Node 0
[ 0.241814] CPU1: Thermal monitoring enabled (TM1)
[ 0.241818] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.241896] CPU1: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.244908] Skipping synchronization checks as TSC is reliable.
[ 0.245234] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.255852] Initializing CPU#2
[ 0.315622] Calibrating delay using timer specific routine..
4521.22 BogoMIPS (lpj=2260611)
[ 0.315630] CPU: Physical Processor ID: 0
[ 0.315631] CPU: Processor Core ID: 2
[ 0.315633] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.315635] CPU: L2 cache: 256K
[ 0.315636] CPU: L3 cache: 8192K
[ 0.315639] CPU 2/0x4 -> Node 0
[ 0.315653] CPU2: Thermal monitoring enabled (TM1)
[ 0.315657] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.315681] CPU2: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.318780] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.329396] Initializing CPU#3
[ 0.389462] Calibrating delay using timer specific routine..
4521.21 BogoMIPS (lpj=2260608)
[ 0.389470] CPU: Physical Processor ID: 0
[ 0.389471] CPU: Processor Core ID: 3
[ 0.389474] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.389475] CPU: L2 cache: 256K
[ 0.389477] CPU: L3 cache: 8192K
[ 0.389479] CPU 3/0x6 -> Node 0
[ 0.389493] CPU3: Thermal monitoring enabled (TM1)
[ 0.389496] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.389571] CPU3: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.392671] Booting processor 4 APIC 0x10 ip 0x6000
[ 0.403286] Initializing CPU#4
[ 0.463303] Calibrating delay using timer specific routine..
4521.25 BogoMIPS (lpj=2260625)
[ 0.463310] CPU: Physical Processor ID: 1
[ 0.463312] CPU: Processor Core ID: 0
[ 0.463314] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.463316] CPU: L2 cache: 256K
[ 0.463317] CPU: L3 cache: 8192K
[ 0.463320] CPU 4/0x10 -> Node 1
[ 0.463336] CPU4: Thermal monitoring enabled (TM1)
[ 0.463339] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.463419] CPU4: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.466490] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.477108] Initializing CPU#5
[ 0.537143] Calibrating delay using timer specific routine..
4521.23 BogoMIPS (lpj=2260619)
[ 0.537151] CPU: Physical Processor ID: 1
[ 0.537153] CPU: Processor Core ID: 1
[ 0.537156] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.537158] CPU: L2 cache: 256K
[ 0.537159] CPU: L3 cache: 8192K
[ 0.537162] CPU 5/0x12 -> Node 1
[ 0.537179] CPU5: Thermal monitoring enabled (TM1)
[ 0.537183] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.537280] CPU5: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.540356] Booting processor 6 APIC 0x14 ip 0x6000
[ 0.550972] Initializing CPU#6
[ 0.610983] Calibrating delay using timer specific routine..
4521.25 BogoMIPS (lpj=2260629)
[ 0.610992] CPU: Physical Processor ID: 1
[ 0.610993] CPU: Processor Core ID: 2
[ 0.610996] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.610998] CPU: L2 cache: 256K
[ 0.610999] CPU: L3 cache: 8192K
[ 0.611002] CPU 6/0x14 -> Node 1
[ 0.611019] CPU6: Thermal monitoring enabled (TM1)
[ 0.611022] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.611103] CPU6: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.614168] Booting processor 7 APIC 0x16 ip 0x6000
[ 0.624783] Initializing CPU#7
[ 0.684823] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260633)
[ 0.684832] CPU: Physical Processor ID: 1
[ 0.684833] CPU: Processor Core ID: 3
[ 0.684836] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.684838] CPU: L2 cache: 256K
[ 0.684839] CPU: L3 cache: 8192K
[ 0.684843] CPU 7/0x16 -> Node 1
[ 0.684858] CPU7: Thermal monitoring enabled (TM1)
[ 0.684862] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.684912] CPU7: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.687980] Booting processor 8 APIC 0x1 ip 0x6000
[ 0.698592] Initializing CPU#8
[ 0.758663] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260630)
[ 0.758671] CPU: Physical Processor ID: 0
[ 0.758672] CPU: Processor Core ID: 0
[ 0.758675] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.758677] CPU: L2 cache: 256K
[ 0.758678] CPU: L3 cache: 8192K
[ 0.758681] CPU 8/0x1 -> Node 0
[ 0.758693] CPU8: Thermal monitoring enabled (TM1)
[ 0.758696] CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.758732] CPU8: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.761813] Booting processor 9 APIC 0x3 ip 0x6000
[ 0.772410] Initializing CPU#9
[ 0.832503] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260631)
[ 0.832509] CPU: Physical Processor ID: 0
[ 0.832511] CPU: Processor Core ID: 1
[ 0.832513] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.832514] CPU: L2 cache: 256K
[ 0.832515] CPU: L3 cache: 8192K
[ 0.832517] CPU 9/0x3 -> Node 0
[ 0.832528] CPU9: Thermal monitoring enabled (TM1)
[ 0.832530] CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.832553] CPU9: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.835639] Booting processor 10 APIC 0x5 ip 0x6000
[ 0.846237] Initializing CPU#10
[ 0.906343] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260630)
[ 0.906349] CPU: Physical Processor ID: 0
[ 0.906350] CPU: Processor Core ID: 2
[ 0.906353] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.906354] CPU: L2 cache: 256K
[ 0.906355] CPU: L3 cache: 8192K
[ 0.906357] CPU 10/0x5 -> Node 0
[ 0.906367] CPU10: Thermal monitoring enabled (TM1)
[ 0.906370] CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.906463] CPU10: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 0.909749] Booting processor 11 APIC 0x7 ip 0x6000
[ 0.920347] Initializing CPU#11
[ 0.980183] Calibrating delay using timer specific routine..
4521.24 BogoMIPS (lpj=2260621)
[ 0.980189] CPU: Physical Processor ID: 0
[ 0.980190] CPU: Processor Core ID: 3
[ 0.980193] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.980194] CPU: L2 cache: 256K
[ 0.980195] CPU: L3 cache: 8192K
[ 0.980197] CPU 11/0x7 -> Node 0
[ 0.980207] CPU11: Thermal monitoring enabled (TM1)
[ 0.980210] CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.980295] CPU11: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 0.983585] Booting processor 12 APIC 0x11 ip 0x6000
[ 0.994184] Initializing CPU#12
[ 1.054024] Calibrating delay using timer specific routine..
4521.25 BogoMIPS (lpj=2260629)
[ 1.054030] CPU: Physical Processor ID: 1
[ 1.054031] CPU: Processor Core ID: 0
[ 1.054033] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.054035] CPU: L2 cache: 256K
[ 1.054036] CPU: L3 cache: 8192K
[ 1.054038] CPU 12/0x11 -> Node 1
[ 1.054049] CPU12: Thermal monitoring enabled (TM1)
[ 1.054051] CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.054128] CPU12: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 1.062326] Booting processor 13 APIC 0x13 ip 0x6000
[ 1.072925] Initializing CPU#13
[ 1.132853] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260633)
[ 1.132860] CPU: Physical Processor ID: 1
[ 1.132861] CPU: Processor Core ID: 1
[ 1.132864] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.132865] CPU: L2 cache: 256K
[ 1.132866] CPU: L3 cache: 8192K
[ 1.132869] CPU 13/0x13 -> Node 1
[ 1.132881] CPU13: Thermal monitoring enabled (TM1)
[ 1.132884] CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.132969] CPU13: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 1.136224] Booting processor 14 APIC 0x15 ip 0x6000
[ 1.148755] Initializing CPU#14
[ 1.207691] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260631)
[ 1.207698] CPU: Physical Processor ID: 1
[ 1.207699] CPU: Processor Core ID: 2
[ 1.207702] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.207703] CPU: L2 cache: 256K
[ 1.207704] CPU: L3 cache: 8192K
[ 1.207707] CPU 14/0x15 -> Node 1
[ 1.207719] CPU14: Thermal monitoring enabled (TM1)
[ 1.207722] CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.207794] CPU14: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 1.211055] Booting processor 15 APIC 0x17 ip 0x6000
[ 1.221650] Initializing CPU#15
[ 1.281531] Calibrating delay using timer specific routine..
4521.26 BogoMIPS (lpj=2260631)
[ 1.281538] CPU: Physical Processor ID: 1
[ 1.281539] CPU: Processor Core ID: 3
[ 1.281542] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.281543] CPU: L2 cache: 256K
[ 1.281544] CPU: L3 cache: 8192K
[ 1.281547] CPU 15/0x17 -> Node 1
[ 1.281558] CPU15: Thermal monitoring enabled (TM1)
[ 1.281561] CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.281596] CPU15: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
stepping 05
[ 1.284816] Brought up 16 CPUs
[ 1.285064] Total of 16 processors activated (72340.67 BogoMIPS).
[ 1.292471] khelper used greatest stack depth: 5888 bytes left
[ 1.293016] NET: Registered protocol family 16
[ 1.293693] ACPI: bus type pci registered
[ 1.294072] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.294324] PCI: MCFG area at e0000000 reserved in E820
[ 1.302429] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.302680] PCI: Using configuration type 1 for base access
[ 1.310691] bio: create slab <bio-0> at 0
[ 1.311904] ACPI: EC: Look up EC in DSDT
[ 1.314657] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.322124] ACPI: Interpreter enabled
[ 1.322371] ACPI: (supports S0 S5)
[ 1.322706] ACPI: Using IOAPIC for interrupt routing
[ 1.336345] ACPI: No dock devices found.
[ 1.336743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.337110] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.337368] pci 0000:00:00.0: PME# disabled
[ 1.337675] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.337929] pci 0000:00:01.0: PME# disabled
[ 1.338235] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.338487] pci 0000:00:03.0: PME# disabled
[ 1.338792] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.339047] pci 0000:00:05.0: PME# disabled
[ 1.339354] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.339606] pci 0000:00:07.0: PME# disabled
[ 1.339912] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.340166] pci 0000:00:09.0: PME# disabled
[ 1.341082] pci 0000:00:16.0: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
[ 1.341139] pci 0000:00:16.1: reg 10 64bit mmio: [0xf9ff0000-0xf9ff3fff]
[ 1.341197] pci 0000:00:16.2: reg 10 64bit mmio: [0xf9fec000-0xf9feffff]
[ 1.341254] pci 0000:00:16.3: reg 10 64bit mmio: [0xf9fe8000-0xf9febfff]
[ 1.341310] pci 0000:00:16.4: reg 10 64bit mmio: [0xf9fe4000-0xf9fe7fff]
[ 1.341365] pci 0000:00:16.5: reg 10 64bit mmio: [0xf9fe0000-0xf9fe3fff]
[ 1.341421] pci 0000:00:16.6: reg 10 64bit mmio: [0xf9fdc000-0xf9fdffff]
[ 1.341477] pci 0000:00:16.7: reg 10 64bit mmio: [0xf9fd8000-0xf9fdbfff]
[ 1.341554] pci 0000:00:1a.0: reg 20 io port: [0xb400-0xb41f]
[ 1.341617] pci 0000:00:1a.1: reg 20 io port: [0xb080-0xb09f]
[ 1.341680] pci 0000:00:1a.2: reg 20 io port: [0xb000-0xb01f]
[ 1.341749] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9ffa000-0xf9ffa3ff]
[ 1.341799] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.342054] pci 0000:00:1a.7: PME# disabled
[ 1.342364] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.342617] pci 0000:00:1c.0: PME# disabled
[ 1.342926] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.343183] pci 0000:00:1c.4: PME# disabled
[ 1.343487] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.343742] pci 0000:00:1c.5: PME# disabled
[ 1.344039] pci 0000:00:1d.0: reg 20 io port: [0xb880-0xb89f]
[ 1.344103] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f]
[ 1.344168] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 1.344235] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffc000-0xf9ffc3ff]
[ 1.344286] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.344540] pci 0000:00:1d.7: PME# disabled
[ 1.344900] pci 0000:00:1f.0: quirk: region 0800-087f claimed by
ICH6 ACPI/GPIO/TCO
[ 1.345358] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.345614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
164c (mask 0007)
[ 1.346066] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
03e8 (mask 0007)
[ 1.346518] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
0290 (mask 001f)
[ 1.346969] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at
0ca0 (mask 000f)
[ 1.347458] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9ffe000-0xf9ffe0ff]
[ 1.347471] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 1.347576] pci 0000:07:00.0: reg 18 io port: [0xec00-0xec7f]
[ 1.347589] pci 0000:07:00.0: reg 20 64bit mmio: [0xfafff000-0xfaffffff]
[ 1.347595] pci 0000:07:00.0: reg 30 32bit mmio pref: [0xfaf80000-0xfafbffff]
[ 1.347616] pci 0000:07:00.0: supports D1
[ 1.347618] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 1.347870] pci 0000:07:00.0: PME# disabled
[ 1.348148] pci 0000:00:05.0: bridge io port: [0xe000-0xefff]
[ 1.348151] pci 0000:00:05.0: bridge 32bit mmio: [0xfaf00000-0xfaffffff]
[ 1.348306] pci 0000:03:00.0: reg 10 32bit mmio: [0xfade0000-0xfadfffff]
[ 1.348325] pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f]
[ 1.348336] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfaddc000-0xfaddffff]
[ 1.348413] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.348670] pci 0000:03:00.0: PME# disabled
[ 1.348975] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 1.348979] pci 0000:00:1c.4: bridge 32bit mmio: [0xfad00000-0xfadfffff]
[ 1.349045] pci 0000:04:00.0: reg 10 32bit mmio: [0xfaee0000-0xfaefffff]
[ 1.349064] pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f]
[ 1.349074] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfaedc000-0xfaedffff]
[ 1.349154] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.349410] pci 0000:04:00.0: PME# disabled
[ 1.349716] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 1.349719] pci 0000:00:1c.5: bridge 32bit mmio: [0xfae00000-0xfaefffff]
[ 1.349758] pci 0000:01:03.0: reg 10 32bit mmio pref: [0xf8000000-0xf8ffffff]
[ 1.349764] pci 0000:01:03.0: reg 14 32bit mmio: [0xfacfc000-0xfacfffff]
[ 1.349770] pci 0000:01:03.0: reg 18 32bit mmio: [0xfa000000-0xfa7fffff]
[ 1.349842] pci 0000:00:1e.0: transparent bridge
[ 1.350094] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfacfffff]
[ 1.350099] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf8000000-0xf8ffffff]
[ 1.350132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.350441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.350532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.350597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.350640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.350682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.350742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.350800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
[ 1.350857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.350914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 1.365905] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.366731] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.367550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.368369] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.369185] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12
14 15) *0, disabled.
[ 1.370292] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 1.371112] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12
14 15) *0, disabled.
[ 1.372216] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.373134] vgaarb: device added:
PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.373593] vgaarb: loaded
[ 1.374034] SCSI subsystem initialized
[ 1.374618] libata version 3.00 loaded.
[ 1.374758] usbcore: registered new interface driver usbfs
[ 1.375057] usbcore: registered new interface driver hub
[ 1.375373] usbcore: registered new device driver usb
[ 1.375937] PCI: Using ACPI for IRQ routing
[ 1.376487] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.376947] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.391735] Switching to clocksource tsc
[ 1.394331] pnp: PnP ACPI init
[ 1.394593] ACPI: bus type pnp registered
[ 1.400924] pnp: PnP ACPI: found 16 devices
[ 1.401173] ACPI: ACPI bus type pnp unregistered
[ 1.401431] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 1.401690] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.401945] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 1.402203] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 1.402459] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
[ 1.402715] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 1.402974] system 00:09: ioport range 0x164e-0x164f has been reserved
[ 1.403228] system 00:0a: ioport range 0x680-0x6ff has been reserved
[ 1.403482] system 00:0a: ioport range 0x295-0x296 has been reserved
[ 1.403737] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 1.403988] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 1.404240] system 00:0b: ioport range 0x500-0x57f could not be reserved
[ 1.404494] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.404750] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.405004] system 00:0b: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 1.405260] system 00:0d: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 1.405719] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.405976] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.406233] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 1.406488] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 1.406743] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 1.406997] system 00:0f: iomem range 0x100000-0xbf8fffff could not
be reserved
[ 1.407456] system 00:0f: iomem range 0xfed90000-0xffffffff could
not be reserved
[ 1.412572] pci 0000:00:01.0: PCI bridge, secondary bus 0000:09
[ 1.412823] pci 0000:00:01.0: IO window: disabled
[ 1.413076] pci 0000:00:01.0: MEM window: disabled
[ 1.413328] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.413582] pci 0000:00:03.0: PCI bridge, secondary bus 0000:08
[ 1.413834] pci 0000:00:03.0: IO window: disabled
[ 1.414087] pci 0000:00:03.0: MEM window: disabled
[ 1.414337] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.414594] pci 0000:00:05.0: PCI bridge, secondary bus 0000:07
[ 1.414848] pci 0000:00:05.0: IO window: 0xe000-0xefff
[ 1.415102] pci 0000:00:05.0: MEM window: 0xfaf00000-0xfaffffff
[ 1.415358] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.415615] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 1.415867] pci 0000:00:07.0: IO window: disabled
[ 1.416119] pci 0000:00:07.0: MEM window: disabled
[ 1.416371] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.416627] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 1.416879] pci 0000:00:09.0: IO window: disabled
[ 1.417134] pci 0000:00:09.0: MEM window: disabled
[ 1.417384] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.417637] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.417888] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 1.418139] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 1.423343] pci 0000:00:1c.0: PREFETCH window:
0x000000c0200000-0x000000c03fffff
[ 1.423802] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.424056] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 1.424309] pci 0000:00:1c.4: MEM window: 0xfad00000-0xfadfffff
[ 1.424566] pci 0000:00:1c.4: PREFETCH window:
0x000000c0400000-0x000000c05fffff
[ 1.425025] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 1.425277] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 1.425531] pci 0000:00:1c.5: MEM window: 0xfae00000-0xfaefffff
[ 1.425784] pci 0000:00:1c.5: PREFETCH window:
0x000000c0600000-0x000000c07fffff
[ 1.426239] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 1.426492] pci 0000:00:1e.0: IO window: disabled
[ 1.426745] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfacfffff
[ 1.426999] pci 0000:00:1e.0: PREFETCH window:
0x000000f8000000-0x000000f8ffffff
[ 1.427467] pci 0000:00:01.0: setting latency timer to 64
[ 1.427474] pci 0000:00:03.0: setting latency timer to 64
[ 1.427481] pci 0000:00:05.0: setting latency timer to 64
[ 1.427487] pci 0000:00:07.0: setting latency timer to 64
[ 1.427494] pci 0000:00:09.0: setting latency timer to 64
[ 1.427501] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.427754] alloc irq_desc for 17 on node -1
[ 1.427755] alloc kstat_irqs on node -1
[ 1.427760] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.428015] pci 0000:00:1c.0: setting latency timer to 64
[ 1.428022] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.428276] pci 0000:00:1c.4: setting latency timer to 64
[ 1.428283] alloc irq_desc for 16 on node -1
[ 1.428284] alloc kstat_irqs on node -1
[ 1.428287] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.428545] pci 0000:00:1c.5: setting latency timer to 64
[ 1.428550] pci 0000:00:1e.0: setting latency timer to 64
[ 1.428554] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.428556] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.428559] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 1.428561] pci_bus 0000:07: resource 1 mem: [0xfaf00000-0xfaffffff]
[ 1.428563] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 1.428565] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[ 1.428567] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 1.428569] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 1.428571] pci_bus 0000:03: resource 1 mem: [0xfad00000-0xfadfffff]
[ 1.428573] pci_bus 0000:03: resource 2 pref mem [0xc0400000-0xc05fffff]
[ 1.428575] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 1.428577] pci_bus 0000:04: resource 1 mem: [0xfae00000-0xfaefffff]
[ 1.428579] pci_bus 0000:04: resource 2 pref mem [0xc0600000-0xc07fffff]
[ 1.428581] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfacfffff]
[ 1.428583] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xf8ffffff]
[ 1.428585] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 1.428587] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.428625] NET: Registered protocol family 2
[ 1.429236] IP route cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 1.430982] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.433009] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.433446] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.433700] TCP reno registered
[ 1.434095] NET: Registered protocol family 1
[ 1.434809] RPC: Registered udp transport module.
[ 1.435058] RPC: Registered tcp transport module.
[ 1.435306] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.435735] pci 0000:01:03.0: Boot video device
[ 1.435819] DMAR: Host address width 40
[ 1.436068] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
[ 1.436332] IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f0207e
[ 1.436588] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 1.436841] DMAR: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 1.437095] DMAR: ATSR flags: 0x0
[ 1.443862] microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
[ 1.444122] microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
[ 1.444389] microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
[ 1.444647] microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
[ 1.444902] microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
[ 1.445158] microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
[ 1.445416] microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
[ 1.445674] microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
[ 1.445931] microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x11
[ 1.446190] microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x11
[ 1.446446] microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x11
[ 1.446701] microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x11
[ 1.446957] microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x11
[ 1.447216] microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x11
[ 1.447473] microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x11
[ 1.447729] microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x11
[ 1.448022] Microcode Update Driver: v2.00
<tigran@...azian.fsnet.co.uk>, Peter Oruba
[ 1.448487] Scanning for low memory corruption every 60 seconds
[ 1.448971] audit: initializing netlink socket (disabled)
[ 1.449231] type=2000 audit(1267475873.298:1): initialized
[ 1.458560] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.462486] VFS: Disk quotas dquot_6.5.2
[ 1.462819] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.464103] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
[ 1.464710] SGI XFS with security attributes, large block/inode
numbers, no debug enabled
[ 1.466782] msgmni has been set to 32768
[ 1.468018] alg: No test for stdrng (krng)
[ 1.468393] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.468848] io scheduler noop registered
[ 1.469097] io scheduler anticipatory registered
[ 1.469349] io scheduler deadline registered
[ 1.469663] io scheduler cfq registered (default)
[ 1.470148] alloc irq_desc for 24 on node -1
[ 1.470150] alloc kstat_irqs on node -1
[ 1.470159] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.470165] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.470322] alloc irq_desc for 25 on node -1
[ 1.470324] alloc kstat_irqs on node -1
[ 1.470329] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[ 1.470335] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.470495] alloc irq_desc for 26 on node -1
[ 1.470496] alloc kstat_irqs on node -1
[ 1.470501] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X
[ 1.470507] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.470663] alloc irq_desc for 27 on node -1
[ 1.470665] alloc kstat_irqs on node -1
[ 1.470670] pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
[ 1.470676] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.470830] alloc irq_desc for 28 on node -1
[ 1.470832] alloc kstat_irqs on node -1
[ 1.470837] pcieport 0000:00:09.0: irq 28 for MSI/MSI-X
[ 1.470842] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.471004] alloc irq_desc for 29 on node -1
[ 1.471006] alloc kstat_irqs on node -1
[ 1.471012] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
[ 1.471018] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.471223] alloc irq_desc for 30 on node -1
[ 1.471224] alloc kstat_irqs on node -1
[ 1.471230] pcieport 0000:00:1c.4: irq 30 for MSI/MSI-X
[ 1.471237] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.471438] alloc irq_desc for 31 on node -1
[ 1.471440] alloc kstat_irqs on node -1
[ 1.471446] pcieport 0000:00:1c.5: irq 31 for MSI/MSI-X
[ 1.471452] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.471755] aer 0000:00:01.0:pcie02: AER service couldn't init
device: no _OSC support
[ 1.471765] aer 0000:00:03.0:pcie02: AER service couldn't init
device: no _OSC support
[ 1.471771] aer 0000:00:05.0:pcie02: AER service couldn't init
device: no _OSC support
[ 1.471780] aer 0000:00:07.0:pcie02: AER service couldn't init
device: no _OSC support
[ 1.471785] aer 0000:00:09.0:pcie02: AER service couldn't init
device: no _OSC support
[ 1.475205] Non-volatile memory driver v1.3
[ 1.475563] ipmi message handler version 39.2
[ 1.475812] ipmi device interface
[ 1.476136] IPMI System Interface driver.
[ 1.476389] ipmi_si: Trying SMBIOS-specified kcs state machine at
i/o address 0xca2, slave address 0x20, irq 0
[ 1.586287] ipmi: Found new BMC (man_id: 0x00b980, prod_id:
0xaabb, dev_id: 0x20)
[ 1.586792] IPMI kcs interface initialized
[ 1.592104] IPMI Watchdog: driver initialized
[ 1.592356] Copyright (C) 2004 MontaVista Software - IPMI Powerdown
via sys_reboot.
[ 1.599124] IPMI poweroff: ATCA Detect mfg 0xB980 prod 0xAABB
[ 1.599377] IPMI poweroff: Found a chassis style poweroff function
[ 1.599844] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.600316] ACPI: Power Button [PWRB]
[ 1.600628] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.601096] ACPI: Power Button [PWRF]
[ 1.603474] ACPI: SSDT 00000000bf77e1f0 02B94 (v01 DpgPmm P001Ist
00000011 INTL 20051117)
[ 1.604890] ACPI: SSDT 00000000bf780d90 00961 (v01 PmRef P001Cst
00003001 INTL 20051117)
[ 1.606940] Monitor-Mwait will be used to enter C-3 state
[ 1.606980] Monitor-Mwait will be used to enter C-3 state
[ 1.607080] processor LNXCPU:00: registered as cooling_device0
[ 1.608758] processor LNXCPU:01: registered as cooling_device1
[ 1.610443] processor LNXCPU:02: registered as cooling_device2
[ 1.612135] processor LNXCPU:03: registered as cooling_device3
[ 1.613808] processor LNXCPU:04: registered as cooling_device4
[ 1.615493] processor LNXCPU:05: registered as cooling_device5
[ 1.617160] processor LNXCPU:06: registered as cooling_device6
[ 1.618828] processor LNXCPU:07: registered as cooling_device7
[ 1.620511] processor LNXCPU:08: registered as cooling_device8
[ 1.622194] processor LNXCPU:09: registered as cooling_device9
[ 1.623869] processor LNXCPU:0a: registered as cooling_device10
[ 1.625554] processor LNXCPU:0b: registered as cooling_device11
[ 1.627248] processor LNXCPU:0c: registered as cooling_device12
[ 1.628920] processor LNXCPU:0d: registered as cooling_device13
[ 1.630600] processor LNXCPU:0e: registered as cooling_device14
[ 1.632285] processor LNXCPU:0f: registered as cooling_device15
[ 1.635005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.878465] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.121977] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.365491] serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a NS16550A
[ 2.366067] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.366501] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.366929] 00:08: ttyS2 at I/O 0x3e8 (irq = 5) is a NS16550A
[ 2.369388] brd: module loaded
[ 2.370592] loop: module loaded
[ 2.371250] mvsas 0000:07:00.0: mvsas: driver version 0.8.2
[ 2.371524] mvsas 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.371781] mvsas 0000:07:00.0: setting latency timer to 64
[ 2.372788] mvsas 0000:07:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 5.098928] scsi0 : mvsas
[ 5.099793] sas: phy-0:0 added to port-0:0, phy_mask:0x1 (5001b4d5021b403f)
[ 5.100052] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map 1
[ 5.110038] sas: phy1 matched wide port0
[ 5.110288] sas: phy-0:1 added to port-0:0, phy_mask:0x3 (5001b4d5021b403f)
[ 5.110543] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map 3
[ 5.130507] sas: phy2 matched wide port0
[ 5.130760] sas: phy-0:2 added to port-0:0, phy_mask:0x7 (5001b4d5021b403f)
[ 5.131015] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map 7
[ 5.160959] sas: phy3 matched wide port0
[ 5.161212] sas: phy-0:3 added to port-0:0, phy_mask:0xf (5001b4d5021b403f)
[ 5.161464] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map f
[ 5.201392] sas: DOING DISCOVERY on port 0, pid:1108
[ 5.203271] sas: ex 5001b4d5021b403f phy00:D attached: 5001b4d5021b4000
[ 5.203901] sas: ex 5001b4d5021b403f phy01:D attached: 5001b4d5021b4001
[ 5.204530] sas: ex 5001b4d5021b403f phy02:D attached: 5001b4d5021b4002
[ 5.205169] sas: ex 5001b4d5021b403f phy03:D attached: 5001b4d5021b4003
[ 5.205803] sas: ex 5001b4d5021b403f phy04:D attached: 0000000000000000
[ 5.206445] sas: ex 5001b4d5021b403f phy05:D attached: 0000000000000000
[ 5.207078] sas: ex 5001b4d5021b403f phy06:D attached: 0000000000000000
[ 5.207721] sas: ex 5001b4d5021b403f phy07:D attached: 0000000000000000
[ 5.208359] sas: ex 5001b4d5021b403f phy08:D attached: 5001b4d5021b4008
[ 5.208997] sas: ex 5001b4d5021b403f phy09:D attached: 5001b4d5021b4009
[ 5.209632] sas: ex 5001b4d5021b403f phy10:D attached: 5001b4d5021b400a
[ 5.210271] sas: ex 5001b4d5021b403f phy11:D attached: 5001b4d5021b400b
[ 5.210911] sas: ex 5001b4d5021b403f phy12:S attached: 5005043011ab0000
[ 5.211544] sas: ex 5001b4d5021b403f phy13:S attached: 5005043011ab0000
[ 5.212193] sas: ex 5001b4d5021b403f phy14:S attached: 5005043011ab0000
[ 5.212823] sas: ex 5001b4d5021b403f phy15:S attached: 5005043011ab0000
[ 5.213461] sas: ex 5001b4d5021b403f phy16:T attached: 0000000000000000
[ 5.214098] sas: ex 5001b4d5021b403f phy17:T attached: 0000000000000000
[ 5.214734] sas: ex 5001b4d5021b403f phy18:T attached: 0000000000000000
[ 5.215380] sas: ex 5001b4d5021b403f phy19:T attached: 0000000000000000
[ 5.216014] sas: ex 5001b4d5021b403f phy20:T attached: 0000000000000000
[ 5.216654] sas: ex 5001b4d5021b403f phy21:T attached: 0000000000000000
[ 5.217288] sas: ex 5001b4d5021b403f phy22:T attached: 0000000000000000
[ 5.217926] sas: ex 5001b4d5021b403f phy23:T attached: 0000000000000000
[ 5.218564] sas: ex 5001b4d5021b403f phy24:T attached: 5001b4d5021b4018
[ 5.219203] sas: ex 5001b4d5021b403f phy25:T attached: 5001b4d5021b4019
[ 5.219841] sas: ex 5001b4d5021b403f phy26:T attached: 5001b4d5021b401a
[ 5.220477] sas: ex 5001b4d5021b403f phy27:T attached: 5001b4d5021b401b
[ 5.221117] sas: ex 5001b4d5021b403f phy28:D attached: 5001b4d5021b403d
[ 5.221765] sas: ex 5001b4d5021b403f phy29:D attached: 5001b4d5021b403e
[ 5.225796] sas: sas_ata_phy_reset: Found ATA device.
[ 5.244538] ata1.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 5.244801] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.248480] ata1.00: configured for UDMA/133
[ 5.248787] scsi 0:0:0:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 5.252397] sas: sas_ata_phy_reset: Found ATA device.
[ 5.662880] ata2.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 5.663142] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.666243] ata2.00: configured for UDMA/133
[ 5.666525] scsi 0:0:1:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 5.670204] sas: sas_ata_phy_reset: Found ATA device.
[ 6.095662] ata3.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 6.095921] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.103974] ata3.00: configured for UDMA/133
[ 6.104260] scsi 0:0:2:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 6.108066] sas: sas_ata_phy_reset: Found ATA device.
[ 6.518998] ata4.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
[ 6.519264] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.524506] ata4.00: configured for UDMA/133
[ 6.524790] scsi 0:0:3:0: Direct-Access ATA WDC
WD20EADS-00R 01.0 PQ: 0 ANSI: 5
[ 6.528603] sas: sas_ata_phy_reset: Found ATA device.
[ 6.925489] ata5.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 6.925749] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.928884] ata5.00: configured for UDMA/133
[ 6.929168] scsi 0:0:4:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 6.933409] sas: sas_ata_phy_reset: Found ATA device.
[ 7.355281] ata6.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 7.355544] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.359236] ata6.00: configured for UDMA/133
[ 7.359532] scsi 0:0:5:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 7.362934] sas: sas_ata_phy_reset: Found ATA device.
[ 7.783853] ata7.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 7.784111] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.786906] ata7.00: configured for UDMA/133
[ 7.787190] scsi 0:0:6:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 7.790567] sas: sas_ata_phy_reset: Found ATA device.
[ 8.191104] ata8.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 8.191360] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.194068] ata8.00: configured for UDMA/133
[ 8.194353] scsi 0:0:7:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 8.198555] sas: sas_ata_phy_reset: Found ATA device.
[ 8.604900] ata9.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 8.605164] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.608675] ata9.00: configured for UDMA/133
[ 8.608966] scsi 0:0:8:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 8.612804] sas: sas_ata_phy_reset: Found ATA device.
[ 9.028485] ata10.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 9.028744] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.031882] ata10.00: configured for UDMA/133
[ 9.032169] scsi 0:0:9:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 9.036203] sas: sas_ata_phy_reset: Found ATA device.
[ 9.434533] ata11.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 9.434793] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.438259] ata11.00: configured for UDMA/133
[ 9.438546] scsi 0:0:10:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 9.442826] sas: sas_ata_phy_reset: Found ATA device.
[ 9.832039] ata12.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133
[ 9.832300] ata12.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.836008] ata12.00: configured for UDMA/133
[ 9.836295] scsi 0:0:11:0: Direct-Access ATA WDC
WD20EADS-00S 04.0 PQ: 0 ANSI: 5
[ 9.839944] scsi 0:0:12:0: Enclosure Areca
x28-05.60.1.30 000 PQ: 0 ANSI: 3
[ 9.845752] sas: DONE DISCOVERY on port 0, pid:1108, result:0
[ 9.846247] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846309] sd 0:0:1:0: [sdb] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846347] sd 0:0:1:0: [sdb] Write Protect is off
[ 9.846349] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.846352] sd 0:0:2:0: [sdc] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846373] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846387] sd 0:0:2:0: [sdc] Write Protect is off
[ 9.846389] sd 0:0:2:0: [sdc] Mode Sense: 00 3a 00 00
[ 9.846406] sd 0:0:2:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846425] sd 0:0:3:0: [sdd] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846463] sd 0:0:3:0: [sdd] Write Protect is off
[ 9.846465] sd 0:0:3:0: [sdd] Mode Sense: 00 3a 00 00
[ 9.846476] sd 0:0:4:0: [sde] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846482] sd 0:0:3:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846519] sd 0:0:4:0: [sde] Write Protect is off
[ 9.846521] sd 0:0:4:0: [sde] Mode Sense: 00 3a 00 00
[ 9.846541] sd 0:0:5:0: [sdf] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846546] sd 0:0:4:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846579] sd 0:0:5:0: [sdf] Write Protect is off
[ 9.846581] sd 0:0:5:0: [sdf] Mode Sense: 00 3a 00 00
[ 9.846597] sd 0:0:5:0: [sdf] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846626] sd 0:0:6:0: [sdg] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846670] sd 0:0:6:0: [sdg] Write Protect is off
[ 9.846672] sd 0:0:6:0: [sdg] Mode Sense: 00 3a 00 00
[ 9.846748] sd 0:0:6:0: [sdg] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846794] sdb:
[ 9.846864] sd 0:0:7:0: [sdh] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.846900] sde:
[ 9.846917] sd 0:0:7:0: [sdh] Write Protect is off
[ 9.846920] sd 0:0:7:0: [sdh] Mode Sense: 00 3a 00 00
[ 9.846951] sd 0:0:7:0: [sdh] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.846965] sd 0:0:8:0: [sdi] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.847013] sdc:
[ 9.847015] sd 0:0:8:0: [sdi] Write Protect is off
[ 9.847017] sd 0:0:8:0: [sdi] Mode Sense: 00 3a 00 00
[ 9.847046] sd 0:0:9:0: [sdj] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.847062] sd 0:0:8:0: [sdi] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.847087] sd 0:0:9:0: [sdj] Write Protect is off
[ 9.847089] sd 0:0:9:0: [sdj] Mode Sense: 00 3a 00 00
[ 9.847107] sd 0:0:9:0: [sdj] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.847114] sdf:
[ 9.847259] sdd:
[ 9.847293] sd 0:0:10:0: [sdk] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.847332] sd 0:0:10:0: [sdk] Write Protect is off
[ 9.847335] sd 0:0:10:0: [sdk] Mode Sense: 00 3a 00 00
[ 9.847356] sdg:
[ 9.847360] sd 0:0:10:0: [sdk] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.847383] sdh:
[ 9.847398] sd 0:0:11:0: [sdl] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 9.847433] sd 0:0:11:0: [sdl] Write Protect is off
[ 9.847435] sd 0:0:11:0: [sdl] Mode Sense: 00 3a 00 00
[ 9.847450] sd 0:0:11:0: [sdl] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.847593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.847718] sdi:
[ 9.847750] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 9.847792] sdk:
[ 9.847822] sd 0:0:2:0: Attached scsi generic sg2 type 0
[ 9.847853] sdj:
[ 9.847878] sdl:
[ 9.847902] sd 0:0:3:0: Attached scsi generic sg3 type 0
[ 9.847958] sd 0:0:4:0: Attached scsi generic sg4 type 0
[ 9.847998] sd 0:0:5:0: Attached scsi generic sg5 type 0
[ 9.848059] sd 0:0:6:0: Attached scsi generic sg6 type 0
[ 9.848098] sd 0:0:7:0: Attached scsi generic sg7 type 0
[ 9.848144] sd 0:0:8:0: Attached scsi generic sg8 type 0
[ 9.848185] sd 0:0:9:0: Attached scsi generic sg9 type 0
[ 9.848229] sd 0:0:10:0: Attached scsi generic sg10 type 0
[ 9.848268] sd 0:0:11:0: Attached scsi generic sg11 type 0
[ 9.848307] scsi 0:0:12:0: Attached scsi generic sg12 type 13
[ 9.850415] sdl1
[ 9.865606] sdd1
[ 9.865652] sd 0:0:0:0: [sda] Write Protect is off
[ 9.865657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.865676] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.865870] sd 0:0:11:0: [sdl] Attached SCSI disk
[ 9.866861]
[ 9.867156] sdb1
[ 9.867337] sd 0:0:3:0: [sdd] Attached SCSI disk
[ 9.867740] sdj1
[ 9.867964] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 9.868333] sdi1
[ 9.868516] sd 0:0:9:0: [sdj] Attached SCSI disk
[ 9.868940] sdh1
[ 9.869236] sdf1
[ 9.869463] sd 0:0:8:0: [sdi] Attached SCSI disk
[ 9.869841] sdk1
[ 9.870044] sd 0:0:5:0: [sdf] Attached SCSI disk
[ 9.870420] sdc1
[ 9.870780] sde1
[ 9.871002] sd 0:0:10:0: [sdk] Attached SCSI disk
[ 9.871012] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 9.871640] sdg1
[ 9.871822] sd 0:0:4:0: [sde] Attached SCSI disk
[ 9.871854] sd 0:0:7:0: [sdh] Attached SCSI disk
[ 9.872466] sda: sda1 sda2
[ 9.872685] sd 0:0:6:0: [sdg] Attached SCSI disk
[ 9.873206] sda3
[ 9.887568] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.484367] ses 0:0:12:0: Attached Enclosure device
[ 10.484669] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 10.484926] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 10.485236] e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.485522] e1000e 0000:03:00.0: setting latency timer to 64
[ 10.485700] alloc irq_desc for 32 on node -1
[ 10.485702] alloc kstat_irqs on node -1
[ 10.485706] e1000e 0000:03:00.0: irq 32 for MSI/MSI-X
[ 10.485708] alloc irq_desc for 33 on node -1
[ 10.485709] alloc kstat_irqs on node -1
[ 10.485711] e1000e 0000:03:00.0: irq 33 for MSI/MSI-X
[ 10.485713] alloc irq_desc for 34 on node -1
[ 10.485714] alloc kstat_irqs on node -1
[ 10.485717] e1000e 0000:03:00.0: irq 34 for MSI/MSI-X
[ 10.568731] 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:30:48:dc:bf:d4
[ 10.569192] 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.569530] 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
[ 10.569820] e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.570103] e1000e 0000:04:00.0: setting latency timer to 64
[ 10.570272] alloc irq_desc for 35 on node -1
[ 10.570273] alloc kstat_irqs on node -1
[ 10.570276] e1000e 0000:04:00.0: irq 35 for MSI/MSI-X
[ 10.570278] alloc irq_desc for 36 on node -1
[ 10.570279] alloc kstat_irqs on node -1
[ 10.570282] e1000e 0000:04:00.0: irq 36 for MSI/MSI-X
[ 10.570283] alloc irq_desc for 37 on node -1
[ 10.570285] alloc kstat_irqs on node -1
[ 10.570287] e1000e 0000:04:00.0: irq 37 for MSI/MSI-X
[ 10.658259] 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1)
00:30:48:dc:bf:d5
[ 10.663663] 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 10.664002] 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
[ 10.664309] tun: Universal TUN/TAP device driver, 1.6
[ 10.664563] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 10.664899] console [netcon0] enabled
[ 10.665147] netconsole: network logging started
[ 10.665410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.665679] alloc irq_desc for 18 on node -1
[ 10.665680] alloc kstat_irqs on node -1
[ 10.665684] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.665953] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 10.665956] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 10.666209] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 10.666686] ehci_hcd 0000:00:1a.7: debug port 1
[ 10.670801] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 10.670814] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9ffa000
[ 10.680782] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 10.681068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.681324] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.681782] usb usb1: Product: EHCI Host Controller
[ 10.682033] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r1 ehci_hcd
[ 10.682287] usb usb1: SerialNumber: 0000:00:1a.7
[ 10.682617] usb usb1: configuration #1 chosen from 1 choice
[ 10.682933] hub 1-0:1.0: USB hub found
[ 10.683190] hub 1-0:1.0: 6 ports detected
[ 10.683484] alloc irq_desc for 23 on node -1
[ 10.683485] alloc kstat_irqs on node -1
[ 10.683489] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 10.683750] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 10.683753] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 10.684015] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 10.684488] ehci_hcd 0000:00:1d.7: debug port 1
[ 10.688620] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 10.688630] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffc000
[ 10.697748] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 10.698024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.698276] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.698726] usb usb2: Product: EHCI Host Controller
[ 10.698980] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r1 ehci_hcd
[ 10.699234] usb usb2: SerialNumber: 0000:00:1d.7
[ 10.699559] usb usb2: configuration #1 chosen from 1 choice
[ 10.699874] hub 2-0:1.0: USB hub found
[ 10.700127] hub 2-0:1.0: 6 ports detected
[ 10.700456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.700760] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.701050] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.701309] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 10.701312] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 10.701566] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 10.702043] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 10.702318] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.702573] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.703029] usb usb3: Product: UHCI Host Controller
[ 10.703278] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.703529] usb usb3: SerialNumber: 0000:00:1a.0
[ 10.703856] usb usb3: configuration #1 chosen from 1 choice
[ 10.704166] hub 3-0:1.0: USB hub found
[ 10.704422] hub 3-0:1.0: 2 ports detected
[ 10.704707] alloc irq_desc for 21 on node -1
[ 10.704709] alloc kstat_irqs on node -1
[ 10.704713] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 10.704973] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 10.704976] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 10.705231] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 10.705710] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b080
[ 10.705988] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.706240] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.706691] usb usb4: Product: UHCI Host Controller
[ 10.706944] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.707197] usb usb4: SerialNumber: 0000:00:1a.1
[ 10.707525] usb usb4: configuration #1 chosen from 1 choice
[ 10.707841] hub 4-0:1.0: USB hub found
[ 10.708095] hub 4-0:1.0: 2 ports detected
[ 10.708379] alloc irq_desc for 19 on node -1
[ 10.708381] alloc kstat_irqs on node -1
[ 10.708385] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 10.708644] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 10.708647] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 10.708903] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 10.709385] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b000
[ 10.709664] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.709921] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.710376] usb usb5: Product: UHCI Host Controller
[ 10.710627] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.710882] usb usb5: SerialNumber: 0000:00:1a.2
[ 10.711207] usb usb5: configuration #1 chosen from 1 choice
[ 10.711518] hub 5-0:1.0: USB hub found
[ 10.711775] hub 5-0:1.0: 2 ports detected
[ 10.712064] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 10.712321] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.712324] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.712577] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 10.713053] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880
[ 10.713330] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.713585] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.714040] usb usb6: Product: UHCI Host Controller
[ 10.714288] usb usb6: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.714539] usb usb6: SerialNumber: 0000:00:1d.0
[ 10.714866] usb usb6: configuration #1 chosen from 1 choice
[ 10.715178] hub 6-0:1.0: USB hub found
[ 10.715431] hub 6-0:1.0: 2 ports detected
[ 10.715715] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.715972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 10.715975] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.716226] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 10.716701] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 10.716976] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.717229] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.717685] usb usb7: Product: UHCI Host Controller
[ 10.717938] usb usb7: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.718189] usb usb7: SerialNumber: 0000:00:1d.1
[ 10.718512] usb usb7: configuration #1 chosen from 1 choice
[ 10.718822] hub 7-0:1.0: USB hub found
[ 10.719075] hub 7-0:1.0: 2 ports detected
[ 10.719359] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.719616] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 10.719619] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.719876] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 10.720351] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 10.720626] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.720883] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.721336] usb usb8: Product: UHCI Host Controller
[ 10.721585] usb usb8: Manufacturer: Linux 2.6.32-gentoo-r1 uhci_hcd
[ 10.721841] usb usb8: SerialNumber: 0000:00:1d.2
[ 10.722166] usb usb8: configuration #1 chosen from 1 choice
[ 10.722479] hub 8-0:1.0: USB hub found
[ 10.722740] hub 8-0:1.0: 2 ports detected
[ 10.723066] Initializing USB Mass Storage driver...
[ 10.723386] usbcore: registered new interface driver usb-storage
[ 10.723642] USB Mass Storage support registered.
[ 10.723964] usbcore: registered new interface driver libusual
[ 10.724411] PNP: No PS/2 controller found. Probing ports directly.
[ 10.727146] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.727399] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.727759] mice: PS/2 mouse device common for all mice
[ 10.728256] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 10.728531] rtc_cmos 00:03: RTC can wake from S4
[ 10.728852] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 10.729127] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 10.729426] i2c /dev entries driver
[ 10.729781] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 10.730490] coretemp coretemp.0: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.730870] coretemp coretemp.1: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.731473] coretemp coretemp.2: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.732083] coretemp coretemp.3: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.732686] coretemp coretemp.4: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.733292] coretemp coretemp.5: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.733906] coretemp coretemp.6: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.734513] coretemp coretemp.7: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.735115] coretemp coretemp.8: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.735718] coretemp coretemp.9: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.736320] coretemp coretemp.10: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.736932] coretemp coretemp.11: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.737538] coretemp coretemp.12: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.738150] coretemp coretemp.13: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.738768] coretemp coretemp.14: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.739371] coretemp coretemp.15: Unable to access MSR 0xEE, for
Tjmax, left at default
[ 10.739928] EDAC MC: Ver: 2.1.0 Jan 8 2010
[ 10.743927] cpuidle: using governor ladder
[ 10.749680] cpuidle: using governor menu
[ 10.751529] usbcore: registered new interface driver hiddev
[ 10.751846] usbcore: registered new interface driver usbhid
[ 10.752105] usbhid: v2.6:USB HID core driver
[ 10.752545] oprofile: using NMI interrupt.
[ 10.757792] Mirror/redirect action on
[ 10.758039] u32 classifier
[ 10.758286] input device check on
[ 10.758537] Actions configured
[ 10.758791] Netfilter messages via NETLINK v0.30.
[ 10.759059] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.759532] CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use
[ 10.759994] nf_conntrack.acct=1 kernel parameter, acct=1
nf_conntrack module option or
[ 10.760455] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 10.760755] ctnetlink v0.93: registering with nfnetlink.
[ 10.761275] IPv4 over IPv4 tunneling driver
[ 10.761794] GRE over IPv4 tunneling driver
[ 10.762565] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.762857] TCP cubic registered
[ 10.763105] Initializing XFRM netlink socket
[ 10.763359] NET: Registered protocol family 17
[ 10.763613] NET: Registered protocol family 15
[ 10.763874] 802.1Q VLAN Support v1.8 Ben Greear <greearb@...delatech.com>
[ 10.764130] All bugs added by David S. Miller <davem@...hat.com>
[ 10.772406] registered taskstats version 1
[ 10.863508] async/11 used greatest stack depth: 5008 bytes left
[ 11.143107] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.143365] EXT3-fs: write access will be enabled during recovery.
[ 11.290827] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 11.451220] usb 5-2: New USB device found, idVendor=046b, idProduct=ff10
[ 11.451588] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.451844] usb 5-2: Product: Virtual Keyboard and Mouse
[ 11.452093] usb 5-2: Manufacturer: American Megatrends Inc.
[ 11.452581] usb 5-2: SerialNumber: serial
[ 11.453159] usb 5-2: configuration #1 chosen from 1 choice
[ 11.475329] kjournald starting. Commit interval 5 seconds
[ 11.475338] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 11.475344] ext3_orphan_cleanup: deleting unreferenced inode 2908166
[ 11.475373] ext3_orphan_cleanup: deleting unreferenced inode 2908164
[ 11.475379] EXT3-fs: sda1: 2 orphan inodes deleted
[ 11.475380] EXT3-fs: recovery complete.
[ 11.479239] EXT3-fs: mounted filesystem with writeback data mode.
[ 11.479687] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 11.480129] Freeing unused kernel memory: 452k freed
[ 11.480687] Write protecting the kernel read-only data: 6628k
[ 11.556436] khelper used greatest stack depth: 4840 bytes left
[ 11.563537] input: American Megatrends Inc. Virtual Keyboard and
Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[ 11.564415] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID
v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse]
on usb-0000:00:1a.2-2/input0
[ 11.581549] input: American Megatrends Inc. Virtual Keyboard and
Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[ 11.582736] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID
v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1a.2-2/input1
[ 11.788687] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 11.987851] usb 6-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 11.988111] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.988395] usb 6-1: Product: USB Keykoard
[ 11.988649] usb 6-1: Manufacturer: USB
[ 11.989162] usb 6-1: configuration #1 chosen from 1 choice
[ 12.005334] input: USB USB Keykoard as
/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4
[ 12.006052] stty used greatest stack depth: 4160 bytes left
[ 12.006172] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID
v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0
[ 12.449847] udev: starting version 146
[ 12.529975] iTCO_vendor_support: vendor-support=0
[ 12.576657] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 12.577091] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 12.577109] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 12.577116] iTCO_wdt: No card detected
[ 13.099671] EXT3 FS on sda1, internal journal
[ 13.215281] Adding 10490436k swap on /dev/sda2. Priority:-1
extents:1 across:10490436k
[ 15.493672] ls used greatest stack depth: 3904 bytes left
[ 21.056275] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 22.001305] drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[ 22.001314] generic-usb 0003:1C4F:0002.0004: timeout initializing reports
[ 22.001491] input: USB USB Keykoard as
/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input5
[ 22.001563] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID
v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1
[ 64.874322] w83627hf: Found W83627HF chip at 0x290
Thanks,
--
Ilia Mirkin
imirkin@...m.mit.edu
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
Download attachment "mvsas.patch" of type "application/octet-stream" (22187 bytes)
Powered by blists - more mailing lists