| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Mar 2010 01:05:29 -0600
From: Tom Zanussi <tzanussi@...il.com>
To: linux-kernel@...r.kernel.org
Cc: mingo@...e.hu, fweisbec@...il.com, rostedt@...dmis.org,
k-keiichi@...jp.nec.com
Subject: [RFC PATCH 7/7] perf trace/scripting: rwtop and sctop scripts
A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the perf
event stream is fed continuously to the script, which continuously
aggregates the data and reports the current results every 5 seconds.
After the current results are displayed, the aggregations are cleared
and the cycle begins anew.
To run the scripts, simply pipe the output of the 'perf trace record'
step as input to the corresponding 'perf trace report' step:
$ perf trace record sctop | perf trace report sctop
A future patch should probably automatically do this i.e. the user
should be able to just run 'perf trace sctop' and get the same thing,
and the output should do better than just continuously scroll, but
these are just demo scripts for now...
Signed-off-by: Tom Zanussi <tzanussi@...il.com>
---
tools/perf/scripts/perl/bin/rwtop-record | 2 +
tools/perf/scripts/perl/bin/rwtop-report | 6 +
tools/perf/scripts/perl/rwtop.pl | 165 ++++++++++++++++++++++++++++
tools/perf/scripts/python/bin/sctop-record | 2 +
tools/perf/scripts/python/bin/sctop-report | 4 +
tools/perf/scripts/python/sctop.py | 64 +++++++++++
6 files changed, 243 insertions(+), 0 deletions(-)
create mode 100644 tools/perf/scripts/perl/bin/rwtop-record
create mode 100644 tools/perf/scripts/perl/bin/rwtop-report
create mode 100644 tools/perf/scripts/perl/rwtop.pl
create mode 100644 tools/perf/scripts/python/bin/sctop-record
create mode 100644 tools/perf/scripts/python/bin/sctop-report
create mode 100644 tools/perf/scripts/python/sctop.py
diff --git a/tools/perf/scripts/perl/bin/rwtop-record b/tools/perf/scripts/perl/bin/rwtop-record
new file mode 100644
index 0000000..0993193
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rwtop-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -o - -c 1 -f -a -M -R -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write
diff --git a/tools/perf/scripts/perl/bin/rwtop-report b/tools/perf/scripts/perl/bin/rwtop-report
new file mode 100644
index 0000000..3d06c98
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rwtop-report
@@ -0,0 +1,6 @@
+#!/bin/bash
+# description: system-wide r/w top
+perf trace -i - -s ~/libexec/perf-core/scripts/perl/rwtop.pl
+
+
+
diff --git a/tools/perf/scripts/perl/rwtop.pl b/tools/perf/scripts/perl/rwtop.pl
new file mode 100644
index 0000000..4e0d1fd
--- /dev/null
+++ b/tools/perf/scripts/perl/rwtop.pl
@@ -0,0 +1,165 @@
+#!/usr/bin/perl -w
+# (c) 2009, Tom Zanussi <tzanussi@...il.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# Display r/w activity for all processes
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+my $interval = 5;
+my $nlines = 10;
+my $print_thread;
+
+my %reads;
+my %writes;
+
+sub syscalls::sys_exit_read
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $ret) = @_;
+
+ if ($ret > 0) {
+ $reads{$common_pid}{bytes_read} += $ret;
+ } else {
+ if (!defined ($reads{$common_pid}{bytes_read})) {
+ $reads{$common_pid}{bytes_read} = 0;
+ }
+ $reads{$common_pid}{errors}{$ret}++;
+ }
+}
+
+sub syscalls::sys_enter_read
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $fd, $buf, $count) = @_;
+
+ $reads{$common_pid}{bytes_requested} += $count;
+ $reads{$common_pid}{total_reads}++;
+ $reads{$common_pid}{comm} = $common_comm;
+}
+
+sub syscalls::sys_exit_write
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $ret) = @_;
+
+ if ($ret <= 0) {
+ $writes{$common_pid}{errors}{$ret}++;
+ }
+}
+
+sub syscalls::sys_enter_write
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $fd, $buf, $count) = @_;
+
+ $writes{$common_pid}{bytes_written} += $count;
+ $writes{$common_pid}{total_writes}++;
+ $writes{$common_pid}{comm} = $common_comm;
+}
+
+sub trace_begin
+{
+ $SIG{ALRM} = \&print_totals;
+ alarm 5;
+}
+
+sub trace_end
+{
+ print_unhandled();
+ print_totals();
+}
+
+sub print_totals
+{
+ my $count;
+
+ $count = 0;
+
+ printf("\nread counts by pid:\n\n");
+
+ printf("%6s %20s %10s %10s %10s\n", "pid", "comm",
+ "# reads", "bytes_requested", "bytes_read");
+ printf("%6s %-20s %10s %10s %10s\n", "------", "--------------------",
+ "-----------", "----------", "----------");
+
+ foreach my $pid (sort {$reads{$b}{bytes_read} <=>
+ $reads{$a}{bytes_read}} keys %reads) {
+ my $comm = $reads{$pid}{comm};
+ my $total_reads = $reads{$pid}{total_reads};
+ my $bytes_requested = $reads{$pid}{bytes_requested};
+ my $bytes_read = $reads{$pid}{bytes_read};
+
+ printf("%6s %-20s %10s %10s %10s\n", $pid, $comm,
+ $total_reads, $bytes_requested, $bytes_read);
+
+ if (++$count == $nlines) {
+ last;
+ }
+ }
+
+ $count = 0;
+
+ printf("\nwrite counts by pid:\n\n");
+
+ printf("%6s %20s %10s %10s\n", "pid", "comm",
+ "# writes", "bytes_written");
+ printf("%6s %-20s %10s %10s\n", "------", "--------------------",
+ "-----------", "----------");
+
+ foreach my $pid (sort {$writes{$b}{bytes_written} <=>
+ $writes{$a}{bytes_written}} keys %writes) {
+ my $comm = $writes{$pid}{comm};
+ my $total_writes = $writes{$pid}{total_writes};
+ my $bytes_written = $writes{$pid}{bytes_written};
+
+ printf("%6s %-20s %10s %10s\n", $pid, $comm,
+ $total_writes, $bytes_written);
+
+ if (++$count == $nlines) {
+ last;
+ }
+ }
+
+ %reads = ();
+ %writes = ();
+ alarm 5;
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+ if ((scalar keys %unhandled) == 0) {
+ return;
+ }
+
+ print "\nunhandled events:\n\n";
+
+ printf("%-40s %10s\n", "event", "count");
+ printf("%-40s %10s\n", "----------------------------------------",
+ "-----------");
+
+ foreach my $event_name (keys %unhandled) {
+ printf("%-40s %10d\n", $event_name, $unhandled{$event_name});
+ }
+}
+
+sub trace_unhandled
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm) = @_;
+
+ $unhandled{$event_name}++;
+}
diff --git a/tools/perf/scripts/python/bin/sctop-record b/tools/perf/scripts/python/bin/sctop-record
new file mode 100644
index 0000000..1a46fb6
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sctop-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -o - -c 1 -f -a -M -R -e raw_syscalls:sys_enter
diff --git a/tools/perf/scripts/python/bin/sctop-report b/tools/perf/scripts/python/bin/sctop-report
new file mode 100644
index 0000000..4ca46c0
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sctop-report
@@ -0,0 +1,4 @@
+#!/bin/bash
+# description: syscall top
+# args: [comm]
+perf trace -i - -s ~/libexec/perf-core/scripts/python/sctop.py $1
diff --git a/tools/perf/scripts/python/sctop.py b/tools/perf/scripts/python/sctop.py
new file mode 100644
index 0000000..a44de25
--- /dev/null
+++ b/tools/perf/scripts/python/sctop.py
@@ -0,0 +1,64 @@
+# system call top
+# (c) 2010, Tom Zanussi <tzanussi@...il.com>
+# Licensed under the terms of the GNU GPL License version 2
+#
+# Periodically displays system-wide system call totals, broken down by
+# syscall. If a [comm] arg is specified, only syscalls called by
+# [comm] are displayed.
+
+import thread
+import time
+import os
+import sys
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+ '/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+from Util import *
+
+usage = "perf trace -s syscall-counts.py [comm]\n";
+
+for_comm = None
+interval = 5
+
+if len(sys.argv) > 2:
+ sys.exit(usage)
+
+if len(sys.argv) > 1:
+ for_comm = sys.argv[1]
+
+syscalls = autodict()
+
+def trace_begin():
+ thread.start_new_thread(print_syscall_totals, (interval,))
+ pass
+
+def raw_syscalls__sys_enter(event_name, context, common_cpu,
+ common_secs, common_nsecs, common_pid, common_comm,
+ id, args):
+ if for_comm is not None:
+ if common_comm != for_comm:
+ return
+ try:
+ syscalls[id] += 1
+ except TypeError:
+ syscalls[id] = 1
+
+def print_syscall_totals(interval):
+ while 1:
+ if for_comm is not None:
+ print "\nsyscall events for %s:\n\n" % (for_comm),
+ else:
+ print "\nsyscall events:\n\n",
+
+ print "%-40s %10s\n" % ("event", "count"),
+ print "%-40s %10s\n" % ("----------------------------------------", \
+ "-----------"),
+
+ for id, val in sorted(syscalls.iteritems(), key = lambda(k, v): (v, k), \
+ reverse = True):
+ print "%-40d %10d\n" % (id, val),
+ syscalls.clear()
+ time.sleep(interval)
--
1.6.4.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists