Linux version 2.6.32.3 (miguel@pando) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #10 Wed Mar 10 15:36:27 CET 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f72f800 (usable) BIOS-e820: 000000007f72f800 - 000000007f730000 (ACPI NVS) BIOS-e820: 000000007f730000 - 000000007f740000 (ACPI data) BIOS-e820: 000000007f740000 - 000000007f7f0000 (ACPI NVS) BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved) DMI 2.3 present. last_pfn = 0x7f72f max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F800000 mask FFF800000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f4eb0 00014 (v00 ACPIAM) ACPI: RSDT 7f730000 0003C (v01 INTEL D915GAG 20060222 MSFT 00000097) ACPI: FACP 7f730200 00081 (v02 INTEL D915GAG 20060222 MSFT 00000097) ACPI: DSDT 7f730440 05C05 (v01 INTEL D915GAG 00000001 INTL 02002026) ACPI: FACS 7f740000 00040 ACPI: APIC 7f730390 00068 (v01 INTEL D915GAG 20060222 MSFT 00000097) ACPI: MCFG 7f730400 0003C (v01 INTEL D915GAG 20060222 MSFT 00000097) ACPI: ASF! 7f736050 00099 (v16 LEGEND I865PASF 00000001 INTL 02002026) ACPI: TCPA 7f7360f0 00032 (v01 INTEL TBLOEMID 00000001 MSFT 00000097) ACPI: WDDT 7f736122 00040 (v01 INTEL OEMWDDT 00000001 INTL 02002026) 1151MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (6 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000130e098] TEXT DATA BSS ==> [0001000000 - 000130e098] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [000130f000 - 000131514c] BRK ==> [000130f000 - 000131514c] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f72f Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f72f On node 0 totalpages: 521934 free_area_init_node: node 0, pgdat c12abb88, node_mem_map c1317000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292402 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517855 Kernel command line: root=/dev/sda3 ro quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007f72f) Memory: 2066560k/2088124k available (1999k kernel code, 20300k reserved, 744k data, 240k init, 1178820k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc12ae000 - 0xc12ea000 ( 240 kB) .data : 0xc11f3c5e - 0xc12adc80 ( 744 kB) .text : 0xc1000000 - 0xc11f3c5e (1999 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 3199.817 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.63 BogoMIPS (lpj=31998170) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K mce: CPU supports 4 MCE banks using mwait in idle threads. CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ACPI: setting ELCR to 0200 (from 0e28) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 4 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: Power Resource [URP2] (off) ACPI: No dock devices found. ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xff480000-0xff4fffff] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xff440000-0xff47ffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff43fc00-0xff43ffff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 4700-470f pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0xc400-0xc41f] pci 0000:00:01.0: bridge 32bit mmio: [0xffa00000-0xffafffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xd7ffffff] pci 0000:00:1c.0: bridge 32bit mmio: [0xff600000-0xff6fffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd7b00000-0xd7bfffff] pci 0000:00:1c.1: bridge 32bit mmio: [0xff700000-0xff7fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd7c00000-0xd7cfffff] pci 0000:00:1c.2: bridge 32bit mmio: [0xff800000-0xff8fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd7d00000-0xd7dfffff] pci 0000:00:1c.3: bridge 32bit mmio: [0xff900000-0xff9fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd7e00000-0xd7efffff] pci 0000:06:08.0: reg 10 32bit mmio: [0xff500000-0xff500fff] pci 0000:06:08.0: reg 14 io port: [0xbc00-0xbc3f] pci 0000:06:08.0: supports D1 D2 pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xff500000-0xff5fffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd7a00000-0xd7afffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved system 00:0a: ioport range 0x400-0x47f has been reserved system 00:0a: ioport range 0x680-0x6ff has been reserved system 00:0a: ioport range 0x500-0x53f has been reserved system 00:0a: iomem range 0xeec00000-0xeec03fff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0a: iomem range 0xfed13000-0xfed13fff has been reserved system 00:0a: iomem range 0xfed14000-0xfed17fff has been reserved system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xdffff could not be reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x7f7fffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xffa00000-0xffafffff pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xd7ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0xff600000-0xff6fffff pci 0000:00:1c.0: PREFETCH window: 0x000000d7b00000-0x000000d7bfffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xff700000-0xff7fffff pci 0000:00:1c.1: PREFETCH window: 0x000000d7c00000-0x000000d7cfffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x3000-0x3fff pci 0000:00:1c.2: MEM window: 0xff800000-0xff8fffff pci 0000:00:1c.2: PREFETCH window: 0x000000d7d00000-0x000000d7dfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.3: IO window: 0x4000-0x4fff pci 0000:00:1c.3: MEM window: 0xff900000-0xff9fffff pci 0000:00:1c.3: PREFETCH window: 0x000000d7e00000-0x000000d7efffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xb000-0xbfff pci 0000:00:1e.0: MEM window: 0xff500000-0xff5fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d7a00000-0x000000d7afffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0106 -> 0107) pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0106 -> 0107) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0106 -> 0107) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xffa00000-0xffafffff] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xd7ffffff] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff] pci_bus 0000:05: resource 1 mem: [0xff600000-0xff6fffff] pci_bus 0000:05: resource 2 pref mem [0xd7b00000-0xd7bfffff] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] pci_bus 0000:04: resource 1 mem: [0xff700000-0xff7fffff] pci_bus 0000:04: resource 2 pref mem [0xd7c00000-0xd7cfffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xff800000-0xff8fffff] pci_bus 0000:03: resource 2 pref mem [0xd7d00000-0xd7dfffff] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] pci_bus 0000:02: resource 1 mem: [0xff900000-0xff9fffff] pci_bus 0000:02: resource 2 pref mem [0xd7e00000-0xd7efffff] pci_bus 0000:06: resource 0 io: [0xb000-0xbfff] pci_bus 0000:06: resource 1 mem: [0xff500000-0xff5fffff] pci_bus 0000:06: resource 2 pref mem [0xd7a00000-0xd7afffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/O]. fuse init (API version 7.13) msgmni has been set to 1735 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.3: setting latency timer to 64 input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 915G Chipset DEBUG i915 num_entries = 32768 DEBUG i915 intel_private.gtt_total_size = 65536 agpgart-intel 0000:00:00.0: detected 8060K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 ide1: BM-DMA at 0xffa8-0xffaf Probing IDE interface ide0... Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 10 ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 10 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered e100 0000:06:08.0: PCI INT A -> Link[LNKE] -> GSI 3 (level, low) -> IRQ 3 e100 0000:06:08.0: PME# disabled e100: eth0: e100_probe: addr 0xff500000, irq 3, MAC addr 00:11:11:6f:50:6c ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 9, io mem 0xff43fc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.3 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000c800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.3 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000cc00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.3 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000d000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.3 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000d400 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.3 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:02: setting system clock to 2010-03-11 15:10:43 UTC (1268320243) input: AT Translated Set 2 keyboard as /class/input/input2 ata2.00: ATA-6: ST3200822AS, 3.01, max UDMA/133 ata2.00: 390721968 sectors, multi 16: LBA48 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk input: PS/2 Logitech Mouse as /class/input/input3 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 240k freed Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. e100: eth0 NIC Link is Up 100 Mbps Full Duplex warning: `ntpd' uses 32-bit capabilities (legacy support in use)