| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100315161802.GB22091@kroah.com>
Date: Mon, 15 Mar 2010 09:18:02 -0700
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...nel.org, lwn@....net
Subject: Re: Linux 2.6.32.10
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5bc4eaa..345c399 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2668,6 +2668,13 @@ and is between 256 and 4096 characters. It is defined in the file
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
+ userpte=
+ [X86] Flags controlling user PTE allocations.
+
+ nohigh = do not allocate PTE pages in
+ HIGHMEM regardless of setting
+ of CONFIG_HIGHPTE.
+
vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)
diff --git a/Makefile b/Makefile
index ec932b2..2becebb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = .9
+EXTRAVERSION = .10
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index 7f418bb..90934b9 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -6,8 +6,6 @@ config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
depends on PROFILING
depends on HAVE_OPROFILE
- depends on TRACING_SUPPORT
- select TRACING
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 91df968..8a20b58 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -94,6 +94,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 93fe21e..679c750 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -8,7 +8,7 @@
#include <asm/page.h> /* IO address mapping routines need this */
#include <asm/system.h>
-#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
static inline u32 flip_dword (u32 l)
{
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index f72080b..156707b 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -143,7 +143,7 @@ extern unsigned long pfn_base;
#define phys_to_virt __va
#define ARCH_PFN_OFFSET (pfn_base)
-#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
index 55db5ec..39327d6 100644
--- a/arch/sparc/include/asm/stat.h
+++ b/arch/sparc/include/asm/stat.h
@@ -53,8 +53,8 @@ struct stat {
ino_t st_ino;
mode_t st_mode;
short st_nlink;
- uid_t st_uid;
- gid_t st_gid;
+ uid16_t st_uid;
+ gid16_t st_gid;
unsigned short st_rdev;
off_t st_size;
time_t st_atime;
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index f3b5466..4589ca3 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -99,7 +99,7 @@ static int __devinit clock_board_probe(struct of_device *op,
p->leds_resource.start = (unsigned long)
(p->clock_regs + CLOCK_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-clockboard-leds";
@@ -194,7 +194,7 @@ static int __devinit fhc_probe(struct of_device *op,
if (!p->central) {
p->leds_resource.start = (unsigned long)
(p->pregs + FHC_PREGS_CTRL);
- p->leds_resource.end = p->leds_resource.end;
+ p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-fhc-leds";
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 2830b41..c49865b 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -526,7 +526,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
* Set some valid stack frames to give to the child.
*/
childstack = (struct sparc_stackf __user *)
- (sp & ~0x7UL);
+ (sp & ~0xfUL);
parentstack = (struct sparc_stackf __user *)
regs->u_regs[UREG_FP];
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index c3f1cce..cb70476 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -398,11 +398,11 @@ static unsigned long clone_stackframe(unsigned long csp, unsigned long psp)
} else
__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
- /* Now 8-byte align the stack as this is mandatory in the
- * Sparc ABI due to how register windows work. This hides
- * the restriction from thread libraries etc. -DaveM
+ /* Now align the stack as this is mandatory in the Sparc ABI
+ * due to how register windows work. This hides the
+ * restriction from thread libraries etc.
*/
- csp &= ~7UL;
+ csp &= ~15UL;
distance = fp - psp;
rval = (csp - distance);
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index ba5b09a..ea22cd3 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -120,8 +120,8 @@ struct rt_signal_frame32 {
};
/* Align macros */
-#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 7) & (~7)))
-#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 7) & (~7)))
+#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15)))
+#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15)))
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
@@ -420,15 +420,17 @@ static void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, uns
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 7ce1a10..9882df9 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -267,15 +267,17 @@ static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *re
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static inline int
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 647afbd..9fa48c3 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -353,7 +353,7 @@ segv:
/* Checks if the fp is valid */
static int invalid_frame_pointer(void __user *fp, int fplen)
{
- if (((unsigned long) fp) & 7)
+ if (((unsigned long) fp) & 15)
return 1;
return 0;
}
@@ -396,15 +396,17 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static inline void
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index 8c91d9b..db15d12 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -191,10 +191,12 @@ tsb_dtlb_load:
tsb_itlb_load:
/* Executable bit must be set. */
-661: andcc %g5, _PAGE_EXEC_4U, %g0
- .section .sun4v_1insn_patch, "ax"
+661: sethi %hi(_PAGE_EXEC_4U), %g4
+ andcc %g5, %g4, %g0
+ .section .sun4v_2insn_patch, "ax"
.word 661b
andcc %g5, _PAGE_EXEC_4V, %g0
+ nop
.previous
be,pn %xcc, tsb_do_fault
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index f9f4724..14531ab 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -327,7 +327,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
current->mm->free_area_cache = TASK_UNMAPPED_BASE;
current->mm->cached_hole_size = 0;
- current->mm->mmap = NULL;
install_exec_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 7c7c16c..5f61f6e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic);
struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
+void setup_IO_APIC_irq_extra(u32 gsi);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
extern void ioapic_insert_resources(void);
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 0e8c2a0..271de94 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -23,6 +23,11 @@ static inline void paravirt_release_pud(unsigned long pfn) {}
#endif
/*
+ * Flags to use when allocating a user page table page.
+ */
+extern gfp_t __userpte_alloc_gfp;
+
+/*
* Allocate and free page tables.
*/
extern pgd_t *pgd_alloc(struct mm_struct *);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 67e929b..195e4b7 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
*irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ setup_IO_APIC_irq_extra(gsi);
+#endif
+
return 0;
}
@@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
- acpi_gsi_to_irq(plat_gsi, &irq);
+ irq = plat_gsi;
+
return irq;
}
@@ -1348,14 +1355,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
},
{
.callback = force_acpi_ht,
- .ident = "ASUS P2B-DS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
- },
- },
- {
- .callback = force_acpi_ht,
.ident = "ASUS CUR-DLS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index c107e83..dc4f486 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1550,6 +1550,56 @@ static void __init setup_IO_APIC_irqs(void)
}
/*
+ * for the gsit that is not in first ioapic
+ * but could not use acpi_register_gsi()
+ * like some special sci in IBM x3330
+ */
+void setup_IO_APIC_irq_extra(u32 gsi)
+{
+ int apic_id = 0, pin, idx, irq;
+ int node = cpu_to_node(boot_cpu_id);
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ apic_id = mp_find_ioapic(gsi);
+ if (apic_id < 0)
+ return;
+
+ pin = mp_find_ioapic_pin(apic_id, gsi);
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1)
+ return;
+
+ irq = pin_2_irq(idx, apic_id, pin);
+#ifdef CONFIG_SPARSE_IRQ
+ desc = irq_to_desc(irq);
+ if (desc)
+ return;
+#endif
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ return;
+ }
+
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+
+ if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[apic_id].apicid, pin);
+ return;
+ }
+ set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
+}
+
+/*
* Set up the timer pin, possibly with the 8259A-master behind.
*/
static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
@@ -3165,12 +3215,9 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
}
spin_unlock_irqrestore(&vector_lock, flags);
- if (irq > 0) {
- dynamic_irq_init(irq);
- /* restore it, in case dynamic_irq_init clear it */
- if (desc_new)
- desc_new->chip_data = cfg_new;
- }
+ if (irq > 0)
+ dynamic_irq_init_keep_chip_data(irq);
+
return irq;
}
@@ -3193,17 +3240,12 @@ void destroy_irq(unsigned int irq)
{
unsigned long flags;
struct irq_cfg *cfg;
- struct irq_desc *desc;
- /* store it, in case dynamic_irq_cleanup clear it */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- dynamic_irq_cleanup(irq);
- /* connect back irq_cfg */
- desc->chip_data = cfg;
+ dynamic_irq_cleanup_keep_chip_data(irq);
free_irte(irq);
spin_lock_irqsave(&vector_lock, flags);
+ cfg = irq_to_desc(irq)->chip_data;
__clear_irq_vector(irq, cfg);
spin_unlock_irqrestore(&vector_lock, flags);
}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index bff34d6..269c2a3 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -461,6 +461,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
},
},
+ { /* Handle problems with rebooting on the iMac9,1. */
+ .callback = set_pci_reboot,
+ .ident = "Apple iMac9,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index e02dbb6..7371e65 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -75,6 +75,7 @@
#define Group (1<<14) /* Bits 3:5 of modrm byte extend opcode */
#define GroupDual (1<<15) /* Alternate decoding of mod == 3 */
#define GroupMask 0xff /* Group number stored in bits 0:7 */
+#define Priv (1<<27) /* instruction generates #GP if current CPL != 0 */
/* Source 2 operand type */
#define Src2None (0<<29)
#define Src2CL (1<<29)
@@ -86,6 +87,7 @@
enum {
Group1_80, Group1_81, Group1_82, Group1_83,
Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
+ Group8, Group9,
};
static u32 opcode_table[256] = {
@@ -203,7 +205,7 @@ static u32 opcode_table[256] = {
SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
/* 0xF0 - 0xF7 */
0, 0, 0, 0,
- ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
+ ImplicitOps | Priv, ImplicitOps, Group | Group3_Byte, Group | Group3,
/* 0xF8 - 0xFF */
ImplicitOps, 0, ImplicitOps, ImplicitOps,
ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
@@ -211,16 +213,20 @@ static u32 opcode_table[256] = {
static u32 twobyte_table[256] = {
/* 0x00 - 0x0F */
- 0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
- ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+ 0, Group | GroupDual | Group7, 0, 0,
+ 0, ImplicitOps, ImplicitOps | Priv, 0,
+ ImplicitOps | Priv, ImplicitOps | Priv, 0, 0,
+ 0, ImplicitOps | ModRM, 0, 0,
/* 0x10 - 0x1F */
0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
/* 0x20 - 0x2F */
- ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+ ModRM | ImplicitOps | Priv, ModRM | Priv,
+ ModRM | ImplicitOps | Priv, ModRM | Priv,
+ 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
/* 0x30 - 0x3F */
- ImplicitOps, 0, ImplicitOps, 0,
- ImplicitOps, ImplicitOps, 0, 0,
+ ImplicitOps | Priv, 0, ImplicitOps | Priv, 0,
+ ImplicitOps, ImplicitOps | Priv, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
/* 0x40 - 0x47 */
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
@@ -258,11 +264,12 @@ static u32 twobyte_table[256] = {
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
DstReg | SrcMem16 | ModRM | Mov,
/* 0xB8 - 0xBF */
- 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
+ 0, 0, Group | Group8, DstMem | SrcReg | ModRM | BitOp,
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
DstReg | SrcMem16 | ModRM | Mov,
/* 0xC0 - 0xCF */
- 0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
+ 0, 0, 0, DstMem | SrcReg | ModRM | Mov,
+ 0, 0, 0, Group | GroupDual | Group9,
0, 0, 0, 0, 0, 0, 0, 0,
/* 0xD0 - 0xDF */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
@@ -311,16 +318,24 @@ static u32 group_table[] = {
SrcMem | ModRM | Stack, 0,
SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
[Group7*8] =
- 0, 0, ModRM | SrcMem, ModRM | SrcMem,
+ 0, 0, ModRM | SrcMem | Priv, ModRM | SrcMem | Priv,
SrcNone | ModRM | DstMem | Mov, 0,
- SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
+ SrcMem16 | ModRM | Mov | Priv, SrcMem | ModRM | ByteOp | Priv,
+ [Group8*8] =
+ 0, 0, 0, 0,
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ [Group9*8] =
+ 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0,
};
static u32 group2_table[] = {
[Group7*8] =
- SrcNone | ModRM, 0, 0, SrcNone | ModRM,
+ SrcNone | ModRM | Priv, 0, 0, SrcNone | ModRM,
SrcNone | ModRM | DstMem | Mov, 0,
SrcMem16 | ModRM | Mov, 0,
+ [Group9*8] =
+ 0, 0, 0, 0, 0, 0, 0, 0,
};
/* EFLAGS bit definitions. */
@@ -1563,12 +1578,6 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
return -1;
}
- /* sysexit must be called from CPL 0 */
- if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
- kvm_inject_gp(ctxt->vcpu, 0);
- return -1;
- }
-
setup_syscalls_segments(ctxt, &cs, &ss);
if ((c->rex_prefix & 0x8) != 0x0)
@@ -1632,6 +1641,12 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
saved_eip = c->eip;
+ /* Privileged instruction can be executed only in CPL=0 */
+ if ((c->d & Priv) && kvm_x86_ops->get_cpl(ctxt->vcpu)) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ goto done;
+ }
+
if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
memop = c->modrm_ea;
@@ -1870,6 +1885,12 @@ special_insn:
int err;
sel = c->src.val;
+
+ if (c->modrm_reg == VCPU_SREG_CS) {
+ kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+ goto done;
+ }
+
if (c->modrm_reg == VCPU_SREG_SS)
toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index ed34f5e..c9ba9de 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -6,6 +6,14 @@
#define PGALLOC_GFP GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO
+#ifdef CONFIG_HIGHPTE
+#define PGALLOC_USER_GFP __GFP_HIGHMEM
+#else
+#define PGALLOC_USER_GFP 0
+#endif
+
+gfp_t __userpte_alloc_gfp = PGALLOC_GFP | PGALLOC_USER_GFP;
+
pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
return (pte_t *)__get_free_page(PGALLOC_GFP);
@@ -15,16 +23,29 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *pte;
-#ifdef CONFIG_HIGHPTE
- pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
-#else
- pte = alloc_pages(PGALLOC_GFP, 0);
-#endif
+ pte = alloc_pages(__userpte_alloc_gfp, 0);
if (pte)
pgtable_page_ctor(pte);
return pte;
}
+static int __init setup_userpte(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ /*
+ * "userpte=nohigh" disables allocation of user pagetables in
+ * high memory.
+ */
+ if (strcmp(arg, "nohigh") == 0)
+ __userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+ else
+ return -EINVAL;
+ return 0;
+}
+early_param("userpte", setup_userpte);
+
void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
pgtable_page_dtor(pte);
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3347f69..2c505ee 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -159,7 +159,7 @@ static int nmi_setup_mux(void)
for_each_possible_cpu(i) {
per_cpu(cpu_msrs, i).multiplex =
- kmalloc(multiplex_size, GFP_KERNEL);
+ kzalloc(multiplex_size, GFP_KERNEL);
if (!per_cpu(cpu_msrs, i).multiplex)
return 0;
}
@@ -179,7 +179,6 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
if (counter_config[i].enabled) {
multiplex[i].saved = -(u64)counter_config[i].count;
} else {
- multiplex[i].addr = 0;
multiplex[i].saved = 0;
}
}
@@ -189,25 +188,27 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
{
+ struct op_msr *counters = msrs->counters;
struct op_msr *multiplex = msrs->multiplex;
int i;
for (i = 0; i < model->num_counters; ++i) {
int virt = op_x86_phys_to_virt(i);
- if (multiplex[virt].addr)
- rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
+ if (counters[i].addr)
+ rdmsrl(counters[i].addr, multiplex[virt].saved);
}
}
static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
{
+ struct op_msr *counters = msrs->counters;
struct op_msr *multiplex = msrs->multiplex;
int i;
for (i = 0; i < model->num_counters; ++i) {
int virt = op_x86_phys_to_virt(i);
- if (multiplex[virt].addr)
- wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
+ if (counters[i].addr)
+ wrmsrl(counters[i].addr, multiplex[virt].saved);
}
}
@@ -303,11 +304,11 @@ static int allocate_msrs(void)
int i;
for_each_possible_cpu(i) {
- per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
+ per_cpu(cpu_msrs, i).counters = kzalloc(counters_size,
GFP_KERNEL);
if (!per_cpu(cpu_msrs, i).counters)
return 0;
- per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
+ per_cpu(cpu_msrs, i).controls = kzalloc(controls_size,
GFP_KERNEL);
if (!per_cpu(cpu_msrs, i).controls)
return 0;
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 39686c2..1ed963d 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -76,19 +76,6 @@ static struct op_ibs_config ibs_config;
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
-{
- int i;
-
- for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
- int hw_counter = op_x86_virt_to_phys(i);
- if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
- msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
- else
- msrs->multiplex[i].addr = 0;
- }
-}
-
static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
struct op_msrs const * const msrs)
{
@@ -98,7 +85,7 @@ static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
int virt = op_x86_phys_to_virt(i);
- if (!counter_config[virt].enabled)
+ if (!reset_value[virt])
continue;
rdmsrl(msrs->controls[i].addr, val);
val &= model->reserved;
@@ -107,10 +94,6 @@ static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
}
}
-#else
-
-static inline void op_mux_fill_in_addresses(struct op_msrs * const msrs) { }
-
#endif
/* functions for op_amd_spec */
@@ -122,18 +105,12 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
for (i = 0; i < NUM_COUNTERS; i++) {
if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
- else
- msrs->counters[i].addr = 0;
}
for (i = 0; i < NUM_CONTROLS; i++) {
if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
- else
- msrs->controls[i].addr = 0;
}
-
- op_mux_fill_in_addresses(msrs);
}
static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
@@ -144,7 +121,8 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
/* setup reset_value */
for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
- if (counter_config[i].enabled)
+ if (counter_config[i].enabled
+ && msrs->counters[op_x86_virt_to_phys(i)].addr)
reset_value[i] = counter_config[i].count;
else
reset_value[i] = 0;
@@ -169,9 +147,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
int virt = op_x86_phys_to_virt(i);
- if (!counter_config[virt].enabled)
- continue;
- if (!msrs->counters[i].addr)
+ if (!reset_value[virt])
continue;
/* setup counter registers */
@@ -405,16 +381,6 @@ static int init_ibs_nmi(void)
return 1;
}
-#ifdef CONFIG_NUMA
- /* Sanity check */
- /* Works only for 64bit with proper numa implementation. */
- if (nodes != num_possible_nodes()) {
- printk(KERN_DEBUG "Failed to setup CPU node(s) for IBS, "
- "found: %d, expected %d",
- nodes, num_possible_nodes());
- return 1;
- }
-#endif
return 0;
}
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index ac6b354..e6a160a 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -394,12 +394,6 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs)
setup_num_counters();
stag = get_stagger();
- /* initialize some registers */
- for (i = 0; i < num_counters; ++i)
- msrs->counters[i].addr = 0;
- for (i = 0; i < num_controls; ++i)
- msrs->controls[i].addr = 0;
-
/* the counter & cccr registers we pay attention to */
for (i = 0; i < num_counters; ++i) {
addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 8eb0587..2873c00 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -37,15 +37,11 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
for (i = 0; i < num_counters; i++) {
if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
- else
- msrs->counters[i].addr = 0;
}
for (i = 0; i < num_counters; i++) {
if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
- else
- msrs->controls[i].addr = 0;
}
}
@@ -57,7 +53,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
int i;
if (!reset_value) {
- reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
+ reset_value = kzalloc(sizeof(reset_value[0]) * num_counters,
GFP_ATOMIC);
if (!reset_value)
return;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 79f9738..3578688 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -48,6 +48,7 @@
#include <asm/traps.h>
#include <asm/setup.h>
#include <asm/desc.h>
+#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/reboot.h>
@@ -1092,6 +1093,12 @@ asmlinkage void __init xen_start_kernel(void)
__supported_pte_mask |= _PAGE_IOMAP;
+ /*
+ * Prevent page tables from being allocated in highmem, even
+ * if CONFIG_HIGHPTE is enabled.
+ */
+ __userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index bf4cd6b..350a3de 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1432,14 +1432,15 @@ static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
{
pgprot_t prot = PAGE_KERNEL;
+ /*
+ * We disable highmem allocations for page tables so we should never
+ * see any calls to kmap_atomic_pte on a highmem page.
+ */
+ BUG_ON(PageHighMem(page));
+
if (PagePinned(page))
prot = PAGE_KERNEL_RO;
- if (0 && PageHighMem(page))
- printk("mapping highpte %lx type %d prot %s\n",
- page_to_pfn(page), type,
- (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
-
return kmap_atomic_prot(page, type, prot);
}
#endif
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d9f78f6..c8f0797 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -888,12 +888,14 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
return(acpi_idle_enter_c1(dev, state));
local_irq_disable();
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
+ if (cx->entry_method != ACPI_CSTATE_FFH) {
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+ }
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
@@ -973,12 +975,14 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
}
local_irq_disable();
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
+ if (cx->entry_method != ACPI_CSTATE_FFH) {
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+ }
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index f336bca..8a0ed28 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -213,7 +213,7 @@ acpi_table_parse_entries(char *id,
unsigned long table_end;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
@@ -280,7 +280,7 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler)
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9b37502..a587046 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -3074,8 +3074,16 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ahci_save_initial_config(pdev, hpriv);
/* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
+ if (hpriv->cap & HOST_CAP_NCQ) {
+ pi.flags |= ATA_FLAG_NCQ;
+ /* Auto-activate optimization is supposed to be supported on
+ all AHCI controllers indicating NCQ support, but it seems
+ to be broken at least on some NVIDIA MCP79 chipsets.
+ Until we get info on which NVIDIA chipsets don't have this
+ issue, if any, disable AA on all NVIDIA AHCIs. */
+ if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ pi.flags |= ATA_FLAG_FPDMA_AA;
+ }
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d16e87e..d9f2913 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.3.9"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -547,16 +547,16 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
- if (pci_mhz > 60) {
+ if (pci_mhz > 60)
hpriv = (void *)(PCI66 | USE_DPLL);
- /*
- * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
- * the MISC. register to stretch the UltraDMA Tss timing.
- * NOTE: This register is only writeable via I/O space.
- */
- if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
- outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
- }
+
+ /*
+ * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+ * the MISC. register to stretch the UltraDMA Tss timing.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
+ outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
/* Now kick off ATA set up */
return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 1093179..f33d768 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -603,6 +603,7 @@ static struct kobject *get_device_parent(struct device *dev,
int retval;
if (dev->class) {
+ static DEFINE_MUTEX(gdp_mutex);
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
@@ -619,6 +620,8 @@ static struct kobject *get_device_parent(struct device *dev,
else
parent_kobj = &parent->kobj;
+ mutex_lock(&gdp_mutex);
+
/* find our class-directory at the parent and reference it */
spin_lock(&dev->class->p->class_dirs.list_lock);
list_for_each_entry(k, &dev->class->p->class_dirs.list, entry)
@@ -627,20 +630,26 @@ static struct kobject *get_device_parent(struct device *dev,
break;
}
spin_unlock(&dev->class->p->class_dirs.list_lock);
- if (kobj)
+ if (kobj) {
+ mutex_unlock(&gdp_mutex);
return kobj;
+ }
/* or create a new class-directory at the parent device */
k = kobject_create();
- if (!k)
+ if (!k) {
+ mutex_unlock(&gdp_mutex);
return NULL;
+ }
k->kset = &dev->class->p->class_dirs;
retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
if (retval < 0) {
+ mutex_unlock(&gdp_mutex);
kobject_put(k);
return NULL;
}
/* do not emit an uevent for this simple "glue" directory */
+ mutex_unlock(&gdp_mutex);
return k;
}
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 33faaa2..4d80966 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -295,6 +295,19 @@ int devtmpfs_delete_node(struct device *dev)
if (dentry->d_inode) {
err = vfs_getattr(nd.path.mnt, dentry, &stat);
if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
+ struct iattr newattrs;
+ /*
+ * before unlinking this node, reset permissions
+ * of possible references like hardlinks
+ */
+ newattrs.ia_uid = 0;
+ newattrs.ia_gid = 0;
+ newattrs.ia_mode = stat.mode & ~0777;
+ newattrs.ia_valid =
+ ATTR_UID|ATTR_GID|ATTR_MODE;
+ mutex_lock(&dentry->d_inode->i_mutex);
+ notify_change(dentry, &newattrs);
+ mutex_unlock(&dentry->d_inode->i_mutex);
err = vfs_unlink(nd.path.dentry->d_inode,
dentry);
if (!err || err == -ENOENT)
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0b73e4e..27e8de4 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -257,6 +257,10 @@ out:
return size;
}
+static int itpm;
+module_param(itpm, bool, 0444);
+MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
+
/*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
@@ -293,7 +297,7 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
&chip->vendor.int_queue);
status = tpm_tis_status(chip);
- if ((status & TPM_STS_DATA_EXPECT) == 0) {
+ if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
rc = -EIO;
goto out_err;
}
@@ -467,6 +471,10 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+ if (itpm)
+ dev_info(dev, "Intel iTPM workaround enabled\n");
+
+
/* Figure out the capabilities */
intfcaps =
ioread32(chip->vendor.iobase +
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index feb5507..c6fbc27 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -687,12 +687,13 @@ static void tty_reset_termios(struct tty_struct *tty)
/**
* tty_ldisc_reinit - reinitialise the tty ldisc
* @tty: tty to reinit
+ * @ldisc: line discipline to reinitialize
*
- * Switch the tty back to N_TTY line discipline and leave the
- * ldisc state closed
+ * Switch the tty to a line discipline and leave the ldisc
+ * state closed
*/
-static void tty_ldisc_reinit(struct tty_struct *tty)
+static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
struct tty_ldisc *ld;
@@ -702,10 +703,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
/*
* Switch the line discipline back
*/
- ld = tty_ldisc_get(N_TTY);
+ ld = tty_ldisc_get(ldisc);
BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
- tty_set_termios_ldisc(tty, N_TTY);
+ tty_set_termios_ldisc(tty, ldisc);
}
/**
@@ -726,6 +727,8 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
void tty_ldisc_hangup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
+ int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
+ int err = 0;
/*
* FIXME! What are the locking issues here? This may me overdoing
@@ -753,25 +756,32 @@ void tty_ldisc_hangup(struct tty_struct *tty)
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
/*
* Shutdown the current line discipline, and reset it to
- * N_TTY.
+ * N_TTY if need be.
+ *
+ * Avoid racing set_ldisc or tty_ldisc_release
*/
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Avoid racing set_ldisc or tty_ldisc_release */
- mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
- if (tty->ldisc) { /* Not yet closed */
- /* Switch back to N_TTY */
- tty_ldisc_reinit(tty);
- /* At this point we have a closed ldisc and we want to
- reopen it. We could defer this to the next open but
- it means auditing a lot of other paths so this is
- a FIXME */
+ mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_halt(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is
+ a FIXME */
+ if (tty->ldisc) { /* Not yet closed */
+ if (reset == 0) {
+ tty_ldisc_reinit(tty, tty->termios->c_line);
+ err = tty_ldisc_open(tty, tty->ldisc);
+ }
+ /* If the re-open fails or we reset then go to N_TTY. The
+ N_TTY open cannot fail */
+ if (reset || err) {
+ tty_ldisc_reinit(tty, N_TTY);
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- tty_ldisc_enable(tty);
}
- mutex_unlock(&tty->ldisc_mutex);
- tty_reset_termios(tty);
+ tty_ldisc_enable(tty);
}
+ mutex_unlock(&tty->ldisc_mutex);
+ if (reset)
+ tty_reset_termios(tty);
}
/**
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 6b3e0c2..6fe4f77 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -603,18 +603,13 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
p->irqaction.handler = sh_cmt_interrupt;
p->irqaction.dev_id = p;
p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
- ret = setup_irq(irq, &p->irqaction);
- if (ret) {
- pr_err("sh_cmt: failed to request irq %d\n", irq);
- goto err1;
- }
/* get hold of clock */
p->clk = clk_get(&p->pdev->dev, cfg->clk);
if (IS_ERR(p->clk)) {
pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk);
ret = PTR_ERR(p->clk);
- goto err2;
+ goto err1;
}
if (resource_size(res) == 6) {
@@ -627,14 +622,25 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
p->clear_bits = ~0xc000;
}
- return sh_cmt_register(p, cfg->name,
- cfg->clockevent_rating,
- cfg->clocksource_rating);
- err2:
- remove_irq(irq, &p->irqaction);
- err1:
+ ret = sh_cmt_register(p, cfg->name,
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ if (ret) {
+ pr_err("sh_cmt: registration failed\n");
+ goto err1;
+ }
+
+ ret = setup_irq(irq, &p->irqaction);
+ if (ret) {
+ pr_err("sh_cmt: failed to request irq %d\n", irq);
+ goto err1;
+ }
+
+ return 0;
+
+err1:
iounmap(p->mapbase);
- err0:
+err0:
return ret;
}
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 973e714..4c8a759 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -221,15 +221,15 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p,
ced->cpumask = cpumask_of(0);
ced->set_mode = sh_mtu2_clock_event_mode;
+ pr_info("sh_mtu2: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
pr_err("sh_mtu2: failed to request irq %d\n",
p->irqaction.irq);
return;
}
-
- pr_info("sh_mtu2: %s used for clock events\n", ced->name);
- clockevents_register_device(ced);
}
static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name,
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 93c2322..961f5b5 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -323,15 +323,15 @@ static void sh_tmu_register_clockevent(struct sh_tmu_priv *p,
ced->set_next_event = sh_tmu_clock_event_next;
ced->set_mode = sh_tmu_clock_event_mode;
+ pr_info("sh_tmu: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+
ret = setup_irq(p->irqaction.irq, &p->irqaction);
if (ret) {
pr_err("sh_tmu: failed to request irq %d\n",
p->irqaction.irq);
return;
}
-
- pr_info("sh_tmu: %s used for clock events\n", ced->name);
- clockevents_register_device(ced);
}
static int sh_tmu_register(struct sh_tmu_priv *p, char *name,
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
index f9c09a5..9a27047 100644
--- a/drivers/gpio/wm831x-gpio.c
+++ b/drivers/gpio/wm831x-gpio.c
@@ -61,23 +61,31 @@ static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
return 0;
}
-static int wm831x_gpio_direction_out(struct gpio_chip *chip,
- unsigned offset, int value)
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
- return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
- WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+ value << offset);
}
-static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int ret;
- wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
- value << offset);
+ ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Can only set GPIO state once it's in output mode */
+ wm831x_gpio_set(chip, offset, value);
+
+ return 0;
}
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b00a1aa..cce453e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4322,7 +4322,7 @@ static void intel_init_display(struct drm_device *dev)
}
/* Returns the core display clock speed */
- if (IS_I945G(dev))
+ if (IS_I945G(dev) || (IS_G33(dev) && ! IS_IGDGM(dev)))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
else if (IS_I915G(dev))
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 952bb4e..a177b57 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -629,6 +629,13 @@ static const struct dmi_system_id bad_lid_status[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
},
},
+ {
+ .ident = "Clevo M5x0N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+ DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+ },
+ },
{ }
};
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 3f5aaf1..5d9c6a7 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -35,6 +35,7 @@
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_sdvo_regs.h"
+#include <linux/dmi.h>
#undef SDVO_DEBUG
@@ -2289,6 +2290,25 @@ intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
return 0x72;
}
+static int intel_sdvo_bad_tv_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG_KMS("Ignoring bad SDVO TV connector for %s\n", id->ident);
+ return 1;
+}
+
+static struct dmi_system_id intel_sdvo_bad_tv[] = {
+ {
+ .callback = intel_sdvo_bad_tv_callback,
+ .ident = "IntelG45/ICH10R/DME1737",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM CORPORATION"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "4800784"),
+ },
+ },
+
+ { } /* terminating entry */
+};
+
static bool
intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
{
@@ -2329,7 +2349,8 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
(1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
}
- } else if (flags & SDVO_OUTPUT_SVID0) {
+ } else if ((flags & SDVO_OUTPUT_SVID0) &&
+ !dmi_check_system(intel_sdvo_bad_tv)) {
sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ce026f0..5b28b4e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1801,8 +1801,6 @@ intel_tv_init(struct drm_device *dev)
drm_connector_attach_property(connector,
dev->mode_config.tv_bottom_margin_property,
tv_priv->margin[TV_MARGIN_BOTTOM]);
-
- dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
out:
drm_sysfs_connector_add(connector);
}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 278f646..7310473 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1686,13 +1686,14 @@ int r600_init(struct radeon_device *rdev)
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failled testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
return 0;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0d82076..838b88c 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -36,6 +36,10 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
typedef int (*next_reloc_t)(struct radeon_cs_parser*, struct radeon_cs_reloc**);
static next_reloc_t r600_cs_packet_next_reloc = &r600_cs_packet_next_reloc_mm;
+struct r600_cs_track {
+ u32 cb_color0_base_last;
+};
+
/**
* r600_cs_packet_parse() - parse cp packet and point ib index to next packet
* @parser: parser structure holding parsing context.
@@ -177,6 +181,28 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
}
/**
+ * r600_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser: parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_packet p3reloc;
+ int r;
+
+ r = r600_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r) {
+ return 0;
+ }
+ if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+ return 0;
+ }
+ return 1;
+}
+
+/**
* r600_cs_packet_next_vline() - parse userspace VLINE packet
* @parser: parser structure holding parsing context.
*
@@ -337,6 +363,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt)
{
struct radeon_cs_reloc *reloc;
+ struct r600_cs_track *track;
volatile u32 *ib;
unsigned idx;
unsigned i;
@@ -344,6 +371,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
int r;
u32 idx_value;
+ track = (struct r600_cs_track *)p->track;
ib = p->ib->ptr;
idx = pkt->idx + 1;
idx_value = radeon_get_ib_value(p, idx);
@@ -503,9 +531,60 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
for (i = 0; i < pkt->count; i++) {
reg = start_reg + (4 * i);
switch (reg) {
+ /* This register were added late, there is userspace
+ * which does provide relocation for those but set
+ * 0 offset. In order to avoid breaking old userspace
+ * we detect this and set address to point to last
+ * CB_COLOR0_BASE, note that if userspace doesn't set
+ * CB_COLOR0_BASE before this register we will report
+ * error. Old userspace always set CB_COLOR0_BASE
+ * before any of this.
+ */
+ case R_0280E0_CB_COLOR0_FRAG:
+ case R_0280E4_CB_COLOR1_FRAG:
+ case R_0280E8_CB_COLOR2_FRAG:
+ case R_0280EC_CB_COLOR3_FRAG:
+ case R_0280F0_CB_COLOR4_FRAG:
+ case R_0280F4_CB_COLOR5_FRAG:
+ case R_0280F8_CB_COLOR6_FRAG:
+ case R_0280FC_CB_COLOR7_FRAG:
+ case R_0280C0_CB_COLOR0_TILE:
+ case R_0280C4_CB_COLOR1_TILE:
+ case R_0280C8_CB_COLOR2_TILE:
+ case R_0280CC_CB_COLOR3_TILE:
+ case R_0280D0_CB_COLOR4_TILE:
+ case R_0280D4_CB_COLOR5_TILE:
+ case R_0280D8_CB_COLOR6_TILE:
+ case R_0280DC_CB_COLOR7_TILE:
+ if (!r600_cs_packet_next_is_pkt3_nop(p)) {
+ if (!track->cb_color0_base_last) {
+ dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] = track->cb_color0_base_last;
+ printk_once(KERN_WARNING "You have old & broken userspace "
+ "please consider updating mesa & xf86-video-ati\n");
+ } else {
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case DB_DEPTH_BASE:
case DB_HTILE_DATA_BASE:
case CB_COLOR0_BASE:
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color0_base_last = ib[idx+1+i];
+ break;
case CB_COLOR1_BASE:
case CB_COLOR2_BASE:
case CB_COLOR3_BASE:
@@ -678,8 +757,11 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
int r600_cs_parse(struct radeon_cs_parser *p)
{
struct radeon_cs_packet pkt;
+ struct r600_cs_track *track;
int r;
+ track = kzalloc(sizeof(*track), GFP_KERNEL);
+ p->track = track;
do {
r = r600_cs_packet_parse(p, &pkt, p->idx);
if (r) {
@@ -757,6 +839,7 @@ int r600_cs_legacy(struct drm_device *dev, void *data, struct drm_file *filp,
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
+ parser.dev = &dev->pdev->dev;
parser.rdev = NULL;
parser.family = family;
parser.ib = &fake_ib;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 27ab428..56fc658 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -674,4 +674,30 @@
#define S_000E60_SOFT_RESET_TSC(x) (((x) & 1) << 16)
#define S_000E60_SOFT_RESET_VMC(x) (((x) & 1) << 17)
+#define R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
+
+#define R_0280E0_CB_COLOR0_FRAG 0x0280E0
+#define S_0280E0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280E0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280E0_BASE_256B 0x00000000
+#define R_0280E4_CB_COLOR1_FRAG 0x0280E4
+#define R_0280E8_CB_COLOR2_FRAG 0x0280E8
+#define R_0280EC_CB_COLOR3_FRAG 0x0280EC
+#define R_0280F0_CB_COLOR4_FRAG 0x0280F0
+#define R_0280F4_CB_COLOR5_FRAG 0x0280F4
+#define R_0280F8_CB_COLOR6_FRAG 0x0280F8
+#define R_0280FC_CB_COLOR7_FRAG 0x0280FC
+#define R_0280C0_CB_COLOR0_TILE 0x0280C0
+#define S_0280C0_BASE_256B(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0280C0_BASE_256B(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0280C0_BASE_256B 0x00000000
+#define R_0280C4_CB_COLOR1_TILE 0x0280C4
+#define R_0280C8_CB_COLOR2_TILE 0x0280C8
+#define R_0280CC_CB_COLOR3_TILE 0x0280CC
+#define R_0280D0_CB_COLOR4_TILE 0x0280D0
+#define R_0280D4_CB_COLOR5_TILE 0x0280D4
+#define R_0280D8_CB_COLOR6_TILE 0x0280D8
+#define R_0280DC_CB_COLOR7_TILE 0x0280DC
+
+
#endif
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 224506a..6735213 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -448,6 +448,7 @@ struct radeon_cs_chunk {
};
struct radeon_cs_parser {
+ struct device *dev;
struct radeon_device *rdev;
struct drm_file *filp;
/* chunks */
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 5ab2cf9..484f791 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -230,6 +230,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
parser.rdev = rdev;
+ parser.dev = rdev->dev;
r = radeon_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index c85df4a..6f68315 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -599,7 +599,11 @@ radeon_user_framebuffer_create(struct drm_device *dev,
struct drm_gem_object *obj;
obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
-
+ if (obj == NULL) {
+ dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, "
+ "can't create framebuffer\n", mode_cmd->handle);
+ return NULL;
+ }
return radeon_framebuffer_create(dev, mode_cmd, obj);
}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b0efd0d..c42403b 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1034,13 +1034,14 @@ int rv770_init(struct radeon_device *rdev)
if (rdev->accel_working) {
r = radeon_ib_pool_init(rdev);
if (r) {
- DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
- rdev->accel_working = false;
- }
- r = r600_ib_test(rdev);
- if (r) {
- DRM_ERROR("radeon: failled testing IB (%d).\n", r);
+ dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
rdev->accel_working = false;
+ } else {
+ r = r600_ib_test(rdev);
+ if (r) {
+ dev_err(rdev->dev, "IB test failed (%d).\n", r);
+ rdev->accel_working = false;
+ }
}
}
return 0;
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 7bcb89f..3d5b8b0 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -466,7 +466,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
void *from_virtual;
void *to_virtual;
int i;
- int ret;
+ int ret = -ENOMEM;
if (ttm->page_flags & TTM_PAGE_FLAG_USER) {
ret = ttm_tt_set_user(ttm, ttm->tsk, ttm->start,
@@ -485,8 +485,10 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
for (i = 0; i < ttm->num_pages; ++i) {
from_page = read_mapping_page(swap_space, i, NULL);
- if (IS_ERR(from_page))
+ if (IS_ERR(from_page)) {
+ ret = PTR_ERR(from_page);
goto out_err;
+ }
to_page = __ttm_tt_get_page(ttm, i);
if (unlikely(to_page == NULL))
goto out_err;
@@ -509,7 +511,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
return 0;
out_err:
ttm_tt_free_alloced_pages(ttm);
- return -ENOMEM;
+ return ret;
}
int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
@@ -521,6 +523,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
void *from_virtual;
void *to_virtual;
int i;
+ int ret = -ENOMEM;
BUG_ON(ttm->state != tt_unbound && ttm->state != tt_unpopulated);
BUG_ON(ttm->caching_state != tt_cached);
@@ -543,7 +546,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
0);
if (unlikely(IS_ERR(swap_storage))) {
printk(KERN_ERR "Failed allocating swap storage.\n");
- return -ENOMEM;
+ return PTR_ERR(swap_storage);
}
} else
swap_storage = persistant_swap_storage;
@@ -555,9 +558,10 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
if (unlikely(from_page == NULL))
continue;
to_page = read_mapping_page(swap_space, i, NULL);
- if (unlikely(to_page == NULL))
+ if (unlikely(IS_ERR(to_page))) {
+ ret = PTR_ERR(to_page);
goto out_err;
-
+ }
preempt_disable();
from_virtual = kmap_atomic(from_page, KM_USER0);
to_virtual = kmap_atomic(to_page, KM_USER1);
@@ -581,5 +585,5 @@ out_err:
if (!persistant_swap_storage)
fput(swap_storage);
- return -ENOMEM;
+ return ret;
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 9678354..668604b 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1658,8 +1658,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e380e7b..9831c3a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -349,6 +349,9 @@
#define USB_VENDOR_ID_NEC 0x073e
#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
+#define USB_VENDOR_ID_NEXTWINDOW 0x1926
+#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
+
#define USB_VENDOR_ID_NTRIG 0x1b96
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN 0x0001
@@ -392,10 +395,6 @@
#define USB_VENDOR_ID_SUNPLUS 0x04fc
#define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8
-#define USB_VENDOR_ID_TENX 0x1130
-#define USB_DEVICE_ID_TENX_IBUDDY1 0x0001
-#define USB_DEVICE_ID_TENX_IBUDDY2 0x0002
-
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TOPMAX 0x0663
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 5d901f6..1ca6574 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -318,6 +318,7 @@ static int hid_submit_out(struct hid_device *hid)
err_hid("usb_submit_urb(out) failed");
return -1;
}
+ usbhid->last_out = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -379,6 +380,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
err_hid("usb_submit_urb(ctrl) failed");
return -1;
}
+ usbhid->last_ctrl = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -514,9 +516,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;
- if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
if (hid_submit_out(hid))
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_out + HZ * 5))
+ usb_unlink_urb(usbhid->urbout);
+ }
return;
}
@@ -537,9 +550,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;
- if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
if (hid_submit_ctrl(hid))
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+ usb_unlink_urb(usbhid->urbctrl);
+ }
}
void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5713b93..64c5dee 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -37,6 +37,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_NATSU, USB_DEVICE_ID_NATSU_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
+ { USB_VENDOR_ID_NEXTWINDOW, USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN, HID_QUIRK_MULTI_INPUT},
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 08f505c..ec20400 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -80,12 +80,14 @@ struct usbhid_device {
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
+ unsigned long last_ctrl; /* record of last output for timeouts */
struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
+ unsigned long last_out; /* record of last output for timeouts */
spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
index 6c9ace1..2ad62c3 100644
--- a/drivers/hwmon/ams/ams-core.c
+++ b/drivers/hwmon/ams/ams-core.c
@@ -213,7 +213,7 @@ int __init ams_init(void)
return -ENODEV;
}
-void ams_exit(void)
+void ams_sensor_detach(void)
{
/* Remove input device */
ams_input_exit();
@@ -221,9 +221,6 @@ void ams_exit(void)
/* Remove attributes */
device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
- /* Shut down implementation */
- ams_info.exit();
-
/* Flush interrupt worker
*
* We do this after ams_info.exit(), because an interrupt might
@@ -239,6 +236,12 @@ void ams_exit(void)
pmf_unregister_irq_client(&ams_freefall_client);
}
+static void __exit ams_exit(void)
+{
+ /* Shut down implementation */
+ ams_info.exit();
+}
+
MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
MODULE_DESCRIPTION("Apple Motion Sensor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c
index 2cbf8a6..abeecd2 100644
--- a/drivers/hwmon/ams/ams-i2c.c
+++ b/drivers/hwmon/ams/ams-i2c.c
@@ -238,6 +238,8 @@ static int ams_i2c_probe(struct i2c_client *client,
static int ams_i2c_remove(struct i2c_client *client)
{
if (ams_info.has_device) {
+ ams_sensor_detach();
+
/* Disable interrupts */
ams_i2c_set_irq(AMS_IRQ_ALL, 0);
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c
index fb18b3d..4f61b3e 100644
--- a/drivers/hwmon/ams/ams-pmu.c
+++ b/drivers/hwmon/ams/ams-pmu.c
@@ -133,6 +133,8 @@ static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
static void ams_pmu_exit(void)
{
+ ams_sensor_detach();
+
/* Disable interrupts */
ams_pmu_set_irq(AMS_IRQ_ALL, 0);
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index 5ed387b..b28d7e2 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -61,6 +61,7 @@ extern struct ams ams_info;
extern void ams_sensors(s8 *x, s8 *y, s8 *z);
extern int ams_sensor_attach(void);
+extern void ams_sensor_detach(void);
extern int ams_pmu_init(struct device_node *np);
extern int ams_i2c_init(struct device_node *np);
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 2092434..d3a786b 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -62,9 +62,9 @@ static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 };
#define TMP423_DEVICE_ID 0x23
static const struct i2c_device_id tmp421_id[] = {
- { "tmp421", tmp421 },
- { "tmp422", tmp422 },
- { "tmp423", tmp423 },
+ { "tmp421", 2 },
+ { "tmp422", 3 },
+ { "tmp423", 4 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp421_id);
@@ -74,21 +74,23 @@ struct tmp421_data {
struct mutex update_lock;
char valid;
unsigned long last_updated;
- int kind;
+ int channels;
u8 config;
s16 temp[4];
};
static int temp_from_s16(s16 reg)
{
- int temp = reg;
+ /* Mask out status bits */
+ int temp = reg & ~0xf;
return (temp * 1000 + 128) / 256;
}
static int temp_from_u16(u16 reg)
{
- int temp = reg;
+ /* Mask out status bits */
+ int temp = reg & ~0xf;
/* Add offset for extended temperature range. */
temp -= 64 * 256;
@@ -108,7 +110,7 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
data->config = i2c_smbus_read_byte_data(client,
TMP421_CONFIG_REG_1);
- for (i = 0; i <= data->kind; i++) {
+ for (i = 0; i < data->channels; i++) {
data->temp[i] = i2c_smbus_read_byte_data(client,
TMP421_TEMP_MSB[i]) << 8;
data->temp[i] |= i2c_smbus_read_byte_data(client,
@@ -167,7 +169,7 @@ static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
devattr = container_of(a, struct device_attribute, attr);
index = to_sensor_dev_attr(devattr)->index;
- if (data->kind > index)
+ if (index < data->channels)
return a->mode;
return 0;
@@ -275,7 +277,7 @@ static int tmp421_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- data->kind = id->driver_data;
+ data->channels = id->driver_data;
err = tmp421_init_client(client);
if (err)
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 386a797..a564fe2 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -90,6 +90,8 @@ static struct task_struct *thread_therm = NULL;
static void write_both_fan_speed(struct thermostat *th, int speed);
static void write_fan_speed(struct thermostat *th, int speed, int fan);
+static void thermostat_create_files(void);
+static void thermostat_remove_files(void);
static int
write_reg(struct thermostat* th, int reg, u8 data)
@@ -161,6 +163,8 @@ remove_thermostat(struct i2c_client *client)
struct thermostat *th = i2c_get_clientdata(client);
int i;
+ thermostat_remove_files();
+
if (thread_therm != NULL) {
kthread_stop(thread_therm);
}
@@ -449,6 +453,8 @@ static int probe_thermostat(struct i2c_client *client,
return -ENOMEM;
}
+ thermostat_create_files();
+
return 0;
}
@@ -566,7 +572,6 @@ thermostat_init(void)
struct device_node* np;
const u32 *prop;
int i = 0, offset = 0;
- int err;
np = of_find_node_by_name(NULL, "fan");
if (!np)
@@ -633,6 +638,17 @@ thermostat_init(void)
return -ENODEV;
}
+#ifndef CONFIG_I2C_POWERMAC
+ request_module("i2c-powermac");
+#endif
+
+ return i2c_add_driver(&thermostat_driver);
+}
+
+static void thermostat_create_files(void)
+{
+ int err;
+
err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
@@ -647,16 +663,9 @@ thermostat_init(void)
if (err)
printk(KERN_WARNING
"Failed to create tempertaure attribute file(s).\n");
-
-#ifndef CONFIG_I2C_POWERMAC
- request_module("i2c-powermac");
-#endif
-
- return i2c_add_driver(&thermostat_driver);
}
-static void __exit
-thermostat_exit(void)
+static void thermostat_remove_files(void)
{
if (of_dev) {
device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
@@ -673,9 +682,14 @@ thermostat_exit(void)
device_remove_file(&of_dev->dev,
&dev_attr_sensor2_fan_speed);
- of_device_unregister(of_dev);
}
+}
+
+static void __exit
+thermostat_exit(void)
+{
i2c_del_driver(&thermostat_driver);
+ of_device_unregister(of_dev);
}
module_init(thermostat_init);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 724efc6..adb3f8a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -614,8 +614,10 @@ static void dec_pending(struct dm_io *io, int error)
if (!md->barrier_error && io_error != -EOPNOTSUPP)
md->barrier_error = io_error;
end_io_acct(io);
+ free_io(md, io);
} else {
end_io_acct(io);
+ free_io(md, io);
if (io_error != DM_ENDIO_REQUEUE) {
trace_block_bio_complete(md->queue, bio);
@@ -623,8 +625,6 @@ static void dec_pending(struct dm_io *io, int error)
bio_endio(bio, io_error);
}
}
-
- free_io(md, io);
}
}
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 0241a7c..dddfc46 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -504,6 +504,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
"bytes left in TS. Resyncing.\n", ts_remain);
priv->ule_sndu_len = 0;
priv->need_pusi = 1;
+ ts += TS_SZ;
continue;
}
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 0e4b97f..690823f 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -112,8 +112,8 @@ config DVB_USB_CXUSB
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
- select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 3051b64..445fa10 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -192,8 +192,8 @@ static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_pa
spi_bias *= qam_tab[p->constellation];
spi_bias /= p->code_rate_HP + 1;
spi_bias /= (guard_tab[p->guard_interval] + 32);
- spi_bias *= 1000ULL;
- spi_bias /= 1000ULL + ppm/1000;
+ spi_bias *= 1000;
+ spi_bias /= 1000 + ppm/1000;
spi_bias *= p->code_rate_HP;
val0x04 = (p->transmission_mode << 2) | p->guard_interval;
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a672401..d258ed7 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4468,6 +4468,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
request_modules(btv);
}
+ init_bttv_i2c_ir(btv);
bttv_input_init(btv);
/* everything is fine */
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index beda363..3eb7c29 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -388,7 +388,12 @@ int __devinit init_bttv_i2c(struct bttv *btv)
if (0 == btv->i2c_rc && i2c_scan)
do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
- /* Instantiate the IR receiver device, if present */
+ return btv->i2c_rc;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
if (0 == btv->i2c_rc) {
struct i2c_board_info info;
/* The external IR receiver is at i2c address 0x34 (0x35 for
@@ -408,7 +413,6 @@ int __devinit init_bttv_i2c(struct bttv *btv)
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
}
- return btv->i2c_rc;
}
int __devexit fini_bttv_i2c(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index a1d0e9c..6cccc2a 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -279,6 +279,7 @@ extern unsigned int bttv_debug;
extern unsigned int bttv_gpio;
extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
extern int init_bttv_i2c(struct bttv *btv);
+extern void init_bttv_i2c_ir(struct bttv *btv);
extern int fini_bttv_i2c(struct bttv *btv);
#define bttv_printk if (bttv_verbose) printk
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index f8328b9..d61767c 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -530,6 +530,12 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
{0x13, 0x00, {0x01}, 1},
{0, 0, {0}, 0}
};
+ /* Without this command the cam won't work with USB-UHCI */
+ gspca_dev->usb_buf[0] = 0x0a;
+ gspca_dev->usb_buf[1] = 0x00;
+ err_code = mr_write(gspca_dev, 2);
+ if (err_code < 0)
+ return err_code;
err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
ARRAY_SIZE(cif_sensor1_init_data));
}
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 50b415e..f7f7e04 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -753,7 +753,7 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
buf[0] = 0xff; /* fixed */
ret = send_control_msg(pdev,
- SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
+ SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
if (!mode && ret >= 0) {
if (value < 0)
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 4a293b4..0ca39ec 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -826,6 +826,13 @@ int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
ret = 0;
goto out;
+ case V4L2_CTRL_TYPE_BUTTON:
+ v4l2_ctrl->minimum = 0;
+ v4l2_ctrl->maximum = 0;
+ v4l2_ctrl->step = 0;
+ ret = 0;
+ goto out;
+
default:
break;
}
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 99b74a3..f31f05a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1178,7 +1178,7 @@ static int s3cmci_card_present(struct mmc_host *mmc)
struct s3c24xx_mci_pdata *pdata = host->pdata;
int ret;
- if (pdata->gpio_detect == 0)
+ if (pdata->no_detect)
return -ENOSYS;
ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index c146304..c0ceebc 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
static irqreturn_t ks_irq(int irq, void *pw)
{
- struct ks_net *ks = pw;
- struct net_device *netdev = ks->netdev;
+ struct net_device *netdev = pw;
+ struct ks_net *ks = netdev_priv(netdev);
u16 status;
/*this should be the first in IRQ handler */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f3600b3..77125b5 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1008,11 +1008,8 @@ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
{
struct sky2_tx_le *le = sky2->tx_le + *slot;
- struct tx_ring_info *re = sky2->tx_ring + *slot;
*slot = RING_NEXT(*slot, sky2->tx_ring_size);
- re->flags = 0;
- re->skb = NULL;
le->ctrl = 0;
return le;
}
@@ -1580,8 +1577,7 @@ static unsigned tx_le_req(const struct sk_buff *skb)
return count;
}
-static void sky2_tx_unmap(struct pci_dev *pdev,
- const struct tx_ring_info *re)
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
{
if (re->flags & TX_MAP_SINGLE)
pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1591,6 +1587,7 @@ static void sky2_tx_unmap(struct pci_dev *pdev,
pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
pci_unmap_len(re, maplen),
PCI_DMA_TODEVICE);
+ re->flags = 0;
}
/*
@@ -1797,6 +1794,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
+ re->skb = NULL;
dev_kfree_skb_any(skb);
sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 1fd7058..31a5d3c 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -102,6 +102,7 @@ static const int multicast_filter_limit = 32;
#include <linux/ethtool.h>
#include <linux/crc32.h>
#include <linux/bitops.h>
+#include <linux/workqueue.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
#include <asm/irq.h>
@@ -389,6 +390,7 @@ struct rhine_private {
struct net_device *dev;
struct napi_struct napi;
spinlock_t lock;
+ struct work_struct reset_task;
/* Frequently used values: keep some adjacent for cache effect. */
u32 quirks;
@@ -407,6 +409,7 @@ struct rhine_private {
static int mdio_read(struct net_device *dev, int phy_id, int location);
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
+static void rhine_reset_task(struct work_struct *work);
static void rhine_tx_timeout(struct net_device *dev);
static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
struct net_device *dev);
@@ -775,6 +778,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
dev->irq = pdev->irq;
spin_lock_init(&rp->lock);
+ INIT_WORK(&rp->reset_task, rhine_reset_task);
+
rp->mii_if.dev = dev;
rp->mii_if.mdio_read = mdio_read;
rp->mii_if.mdio_write = mdio_write;
@@ -1179,22 +1184,18 @@ static int rhine_open(struct net_device *dev)
return 0;
}
-static void rhine_tx_timeout(struct net_device *dev)
+static void rhine_reset_task(struct work_struct *work)
{
- struct rhine_private *rp = netdev_priv(dev);
- void __iomem *ioaddr = rp->base;
-
- printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
- "%4.4x, resetting...\n",
- dev->name, ioread16(ioaddr + IntrStatus),
- mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+ struct rhine_private *rp = container_of(work, struct rhine_private,
+ reset_task);
+ struct net_device *dev = rp->dev;
/* protect against concurrent rx interrupts */
disable_irq(rp->pdev->irq);
napi_disable(&rp->napi);
- spin_lock(&rp->lock);
+ spin_lock_bh(&rp->lock);
/* clear all descriptors */
free_tbufs(dev);
@@ -1206,7 +1207,7 @@ static void rhine_tx_timeout(struct net_device *dev)
rhine_chip_reset(dev);
init_registers(dev);
- spin_unlock(&rp->lock);
+ spin_unlock_bh(&rp->lock);
enable_irq(rp->pdev->irq);
dev->trans_start = jiffies;
@@ -1214,6 +1215,19 @@ static void rhine_tx_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
+static void rhine_tx_timeout(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
+ "%4.4x, resetting...\n",
+ dev->name, ioread16(ioaddr + IntrStatus),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ schedule_work(&rp->reset_task);
+}
+
static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
struct net_device *dev)
{
@@ -1830,10 +1844,11 @@ static int rhine_close(struct net_device *dev)
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
- spin_lock_irq(&rp->lock);
-
- netif_stop_queue(dev);
napi_disable(&rp->napi);
+ cancel_work_sync(&rp->reset_task);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&rp->lock);
if (debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard, "
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index abf896a..6c26840 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5254,11 +5254,7 @@ static int set_wep_key(struct airo_info *ai, u16 index, const char *key,
WepKeyRid wkr;
int rc;
- if (keylen == 0) {
- airo_print_err(ai->dev->name, "%s: key length to set was zero",
- __func__);
- return -1;
- }
+ WARN_ON(keylen == 0);
memset(&wkr, 0, sizeof(wkr));
wkr.len = cpu_to_le16(sizeof(wkr));
@@ -6404,11 +6400,7 @@ static int airo_set_encode(struct net_device *dev,
if (dwrq->length > MIN_KEY_SIZE)
key.len = MAX_KEY_SIZE;
else
- if (dwrq->length > 0)
- key.len = MIN_KEY_SIZE;
- else
- /* Disable the key */
- key.len = 0;
+ key.len = MIN_KEY_SIZE;
/* Check if the key is not marked as invalid */
if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
/* Cleanup */
@@ -6589,12 +6581,22 @@ static int airo_set_encodeext(struct net_device *dev,
default:
return -EINVAL;
}
- /* Send the key to the card */
- rc = set_wep_key(local, idx, key.key, key.len, perm, 1);
- if (rc < 0) {
- airo_print_err(local->dev->name, "failed to set WEP key"
- " at index %d: %d.", idx, rc);
- return rc;
+ if (key.len == 0) {
+ rc = set_wep_tx_idx(local, idx, perm, 1);
+ if (rc < 0) {
+ airo_print_err(local->dev->name,
+ "failed to set WEP transmit index to %d: %d.",
+ idx, rc);
+ return rc;
+ }
+ } else {
+ rc = set_wep_key(local, idx, key.key, key.len, perm, 1);
+ if (rc < 0) {
+ airo_print_err(local->dev->name,
+ "failed to set WEP key at index %d: %d.",
+ idx, rc);
+ return rc;
+ }
}
}
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6cd5efc..aafdc1e 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -546,7 +546,6 @@ struct ath5k_txq_info {
/*
* Transmit packet types.
* used on tx control descriptor
- * TODO: Use them inside base.c corectly
*/
enum ath5k_pkt_type {
AR5K_PKT_TYPE_NORMAL = 0,
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 8a82c75..46f913b 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1220,6 +1220,29 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
return 0;
}
+static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr;
+ enum ath5k_pkt_type htype;
+ __le16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+
+ if (ieee80211_is_beacon(fc))
+ htype = AR5K_PKT_TYPE_BEACON;
+ else if (ieee80211_is_probe_resp(fc))
+ htype = AR5K_PKT_TYPE_PROBE_RESP;
+ else if (ieee80211_is_atim(fc))
+ htype = AR5K_PKT_TYPE_ATIM;
+ else if (ieee80211_is_pspoll(fc))
+ htype = AR5K_PKT_TYPE_PSPOLL;
+ else
+ htype = AR5K_PKT_TYPE_NORMAL;
+
+ return htype;
+}
+
static int
ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
struct ath5k_txq *txq)
@@ -1274,7 +1297,8 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
sc->vif, pktlen, info));
}
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
- ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
+ ieee80211_get_hdrlen_from_skb(skb),
+ get_hw_packet_type(skb),
(sc->power_level * 2),
hw_rate,
info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 45c4ea5..72e2455 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -512,16 +512,13 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
{
u32 nexttbtt, intval;
- /* Configure the timers only when the TSF has to be reset */
-
- if (!(sc->sc_flags & SC_OP_TSF_RESET))
- return;
-
/* NB: the beacon interval is kept internally in TU's */
intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
intval /= ATH_BCBUF; /* for staggered beacons */
nexttbtt = intval;
- intval |= ATH9K_BEACON_RESET_TSF;
+
+ if (sc->sc_flags & SC_OP_TSF_RESET)
+ intval |= ATH9K_BEACON_RESET_TSF;
/*
* In AP mode we enable the beacon timers and SWBA interrupts to
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 0905b38..f735a96 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1295,6 +1295,16 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
* Necessary to avoid issues on AR5416 2.0
*/
REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
+
+ /*
+ * Disable RIFS search on some chips to avoid baseband
+ * hang issues.
+ */
+ if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
+ val = REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS);
+ val &= ~AR_PHY_RIFS_INIT_DELAY;
+ REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val);
+ }
}
static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index dfda6f4..b36ec94 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -368,6 +368,9 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
#define AR_PHY_HEAVY_CLIP_ENABLE 0x99E0
+#define AR_PHY_HEAVY_CLIP_FACTOR_RIFS 0x99EC
+#define AR_PHY_RIFS_INIT_DELAY 0x03ff0000
+
#define AR_PHY_M_SLEEP 0x99f0
#define AR_PHY_REFCLKDLY 0x99f4
#define AR_PHY_REFCLKPD 0x99f8
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1895d63..fd397aa 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -757,7 +757,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
struct ieee80211_tx_rate *rates = tx_info->control.rates;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
__le16 fc = hdr->frame_control;
- u8 try_per_rate, i = 0, rix, nrix;
+ u8 try_per_rate, i = 0, rix;
int is_probe = 0;
if (rate_control_send_low(sta, priv_sta, txrc))
@@ -777,26 +777,25 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
rate_table = sc->cur_rate_table;
rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
- nrix = rix;
if (is_probe) {
/* set one try for probe rates. For the
* probes don't enable rts */
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
- 1, nrix, 0);
+ 1, rix, 0);
/* Get the next tried/allowed rate. No RTS for the next series
* after the probe rate
*/
- ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
+ ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
- try_per_rate, nrix, 0);
+ try_per_rate, rix, 0);
tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
} else {
/* Set the choosen rate. No RTS for first series entry. */
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
- try_per_rate, nrix, 0);
+ try_per_rate, rix, 0);
}
/* Fill in the other rates for multirate retry */
@@ -805,10 +804,10 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
if (i + 1 == 4)
try_per_rate = 4;
- ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
+ ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
/* All other rates in the series have RTS enabled */
ath_rc_rate_set_series(rate_table, &rates[i], txrc,
- try_per_rate, nrix, 1);
+ try_per_rate, rix, 1);
}
/*
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9ca253e..2bde1a9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3967,6 +3967,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
}
/* We are ready to run. */
+ ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_STARTED);
/* Start data flow (TX/RX). */
@@ -4376,8 +4377,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
ieee80211_wake_queues(dev->wl->hw);
- ieee80211_wake_queues(dev->wl->hw);
-
b43_set_status(dev, B43_STAT_INITIALIZED);
out:
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 4b60148..c3968fa 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2921,6 +2921,7 @@ static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
goto out;
}
/* We are ready to run. */
+ ieee80211_wake_queues(dev->wl->hw);
b43legacy_set_status(dev, B43legacy_STAT_STARTED);
/* Start data flow (TX/RX) */
@@ -3341,6 +3342,7 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
b43legacy_security_init(dev);
b43legacy_rng_init(wl);
+ ieee80211_wake_queues(dev->wl->hw);
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
b43legacy_leds_init(dev);
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 99331ed..852753b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2134,7 +2134,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
"%d index %d\n", scd_ssn , index);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 133df70..2f89b62 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1264,7 +1264,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
scd_ssn , index, txq_id, txq->swq_id);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
@@ -1293,16 +1293,14 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
tx_resp->failure_frame);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
- if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
- iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 0cd4ec4..6d6235f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2645,8 +2645,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
priv->staging_rxon.flags = 0;
- iwl_set_rxon_ht(priv, ht_conf);
iwl_set_rxon_channel(priv, conf->channel);
+ iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, conf->channel->band);
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7754538..40ec0c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -410,6 +410,8 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv);
int iwl_hw_tx_queue_init(struct iwl_priv *priv,
struct iwl_tx_queue *txq);
int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+ int sta_id, int tid, int freed);
int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id);
void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index b7e196e..f449f06 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -119,6 +119,20 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
EXPORT_SYMBOL(iwl_txq_update_write_ptr);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+ int sta_id, int tid, int freed)
+{
+ if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+ priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ else {
+ IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+ priv->stations[sta_id].tid[tid].tfds_in_queue,
+ freed);
+ priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
+ }
+}
+EXPORT_SYMBOL(iwl_free_tfds_in_queue);
+
/**
* iwl_tx_queue_free - Deallocate DMA queue.
* @txq: Transmit queue to deallocate.
@@ -1057,6 +1071,7 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
struct iwl_queue *q = &txq->q;
struct iwl_tx_info *tx_info;
int nfreed = 0;
+ struct ieee80211_hdr *hdr;
if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
@@ -1071,6 +1086,10 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
tx_info = &txq->txb[txq->q.read_ptr];
ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
+
+ hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
+ if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+ nfreed++;
tx_info->skb[0] = NULL;
if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
@@ -1485,7 +1504,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
/* calculate mac80211 ampdu sw queue to wake */
int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
priv->mac80211_registered &&
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index d348c26..1b73733 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -157,6 +157,14 @@ static void p54p_refill_rx_ring(struct ieee80211_hw *dev,
skb_tail_pointer(skb),
priv->common.rx_mtu + 32,
PCI_DMA_FROMDEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ dev_kfree_skb_any(skb);
+ dev_err(&priv->pdev->dev,
+ "RX DMA Mapping error\n");
+ break;
+ }
+
desc->host_addr = cpu_to_le32(mapping);
desc->device_addr = 0; // FIXME: necessary?
desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
@@ -317,14 +325,20 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
u32 device_idx, idx, i;
spin_lock_irqsave(&priv->lock, flags);
-
device_idx = le32_to_cpu(ring_control->device_idx[1]);
idx = le32_to_cpu(ring_control->host_idx[1]);
i = idx % ARRAY_SIZE(ring_control->tx_data);
- priv->tx_buf_data[i] = skb;
mapping = pci_map_single(priv->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ p54_free_skb(dev, skb);
+ dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+ return ;
+ }
+ priv->tx_buf_data[i] = skb;
+
desc = &ring_control->tx_data[i];
desc->host_addr = cpu_to_le32(mapping);
desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 92af9b9..8742640 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -60,6 +60,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
{USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 54175b6..2ecbedb 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -83,11 +83,11 @@ MODULE_PARM_DESC(roamdelta,
"set roaming tendency: 0=aggressive, 1=moderate, "
"2=conservative (default: moderate)");
-static int modparam_workaround_interval = 500;
+static int modparam_workaround_interval;
module_param_named(workaround_interval, modparam_workaround_interval,
int, 0444);
MODULE_PARM_DESC(workaround_interval,
- "set stall workaround interval in msecs (default: 500)");
+ "set stall workaround interval in msecs (0=disabled) (default: 0)");
/* various RNDIS OID defs */
@@ -733,12 +733,13 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
le32_to_cpu(u.get_c->status));
if (ret == 0) {
+ memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
+
ret = le32_to_cpu(u.get_c->len);
if (ret > *len)
*len = ret;
- memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
- ret = rndis_error_status(u.get_c->status);
+ ret = rndis_error_status(u.get_c->status);
if (ret < 0)
devdbg(dev, "rndis_query_oid(%s): device returned "
"error, 0x%08x (%d)", oid_to_string(oid),
@@ -1072,6 +1073,8 @@ static int set_auth_mode(struct usbnet *usbdev, u32 wpa_version,
auth_mode = NDIS_80211_AUTH_SHARED;
else if (auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
auth_mode = NDIS_80211_AUTH_OPEN;
+ else if (auth_type == NL80211_AUTHTYPE_AUTOMATIC)
+ auth_mode = NDIS_80211_AUTH_AUTO_SWITCH;
else
return -ENOTSUPP;
@@ -2547,7 +2550,7 @@ static void rndis_device_poller(struct work_struct *work)
/* Workaround transfer stalls on poor quality links.
* TODO: find right way to fix these stalls (as stalls do not happen
* with ndiswrapper/windows driver). */
- if (priv->last_qual <= 25) {
+ if (priv->param_workaround_interval > 0 && priv->last_qual <= 25) {
/* Decrease stats worker interval to catch stalls.
* faster. Faster than 400-500ms causes packet loss,
* Slower doesn't catch stalls fast enough.
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index c1abac8..5becbde 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void)
int __init ibmphp_access_ebda (void)
{
- u8 format, num_ctlrs, rio_complete, hs_complete;
+ u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
int rc = 0;
@@ -260,7 +260,16 @@ int __init ibmphp_access_ebda (void)
iounmap (io_mem);
debug ("returned ebda segment: %x\n", ebda_seg);
- io_mem = ioremap(ebda_seg<<4, 1024);
+ io_mem = ioremap(ebda_seg<<4, 1);
+ if (!io_mem)
+ return -ENOMEM;
+ ebda_sz = readb(io_mem);
+ iounmap(io_mem);
+ debug("ebda size: %d(KiB)\n", ebda_sz);
+ if (ebda_sz == 0)
+ return -ENOMEM;
+
+ io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
if (!io_mem )
return -ENOMEM;
next_offset = 0x180;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 1ee734c..fa0a0d3 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2073,6 +2073,7 @@ static struct attribute_set *hotkey_dev_attributes;
static void tpacpi_driver_event(const unsigned int hkey_event);
static void hotkey_driver_event(const unsigned int scancode);
+static void hotkey_poll_setup(const bool may_warn);
/* HKEY.MHKG() return bits */
#define TP_HOTKEY_TABLET_MASK (1 << 3)
@@ -2254,6 +2255,8 @@ static int tpacpi_hotkey_driver_mask_set(const u32 mask)
rc = hotkey_mask_set((hotkey_acpi_mask | hotkey_driver_mask) &
~hotkey_source_mask);
+ hotkey_poll_setup(true);
+
mutex_unlock(&hotkey_mutex);
return rc;
@@ -2538,7 +2541,7 @@ static void hotkey_poll_stop_sync(void)
}
/* call with hotkey_mutex held */
-static void hotkey_poll_setup(bool may_warn)
+static void hotkey_poll_setup(const bool may_warn)
{
const u32 poll_driver_mask = hotkey_driver_mask & hotkey_source_mask;
const u32 poll_user_mask = hotkey_user_mask & hotkey_source_mask;
@@ -2569,7 +2572,7 @@ static void hotkey_poll_setup(bool may_warn)
}
}
-static void hotkey_poll_setup_safe(bool may_warn)
+static void hotkey_poll_setup_safe(const bool may_warn)
{
mutex_lock(&hotkey_mutex);
hotkey_poll_setup(may_warn);
@@ -2587,7 +2590,11 @@ static void hotkey_poll_set_freq(unsigned int freq)
#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
-static void hotkey_poll_setup_safe(bool __unused)
+static void hotkey_poll_setup(const bool __unused)
+{
+}
+
+static void hotkey_poll_setup_safe(const bool __unused)
{
}
@@ -2597,16 +2604,11 @@ static int hotkey_inputdev_open(struct input_dev *dev)
{
switch (tpacpi_lifecycle) {
case TPACPI_LIFE_INIT:
- /*
- * hotkey_init will call hotkey_poll_setup_safe
- * at the appropriate moment
- */
- return 0;
- case TPACPI_LIFE_EXITING:
- return -EBUSY;
case TPACPI_LIFE_RUNNING:
hotkey_poll_setup_safe(false);
return 0;
+ case TPACPI_LIFE_EXITING:
+ return -EBUSY;
}
/* Should only happen if tpacpi_lifecycle is corrupt */
@@ -2617,7 +2619,7 @@ static int hotkey_inputdev_open(struct input_dev *dev)
static void hotkey_inputdev_close(struct input_dev *dev)
{
/* disable hotkey polling when possible */
- if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING &&
+ if (tpacpi_lifecycle != TPACPI_LIFE_EXITING &&
!(hotkey_source_mask & hotkey_driver_mask))
hotkey_poll_setup_safe(false);
}
@@ -3635,13 +3637,19 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
break;
case 3:
/* 0x3000-0x3FFF: bay-related wakeups */
- if (hkey == TP_HKEY_EV_BAYEJ_ACK) {
+ switch (hkey) {
+ case TP_HKEY_EV_BAYEJ_ACK:
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"bay ejected\n");
hotkey_wakeup_hotunplug_complete_notify_change();
known_ev = true;
- } else {
+ break;
+ case TP_HKEY_EV_OPTDRV_EJ:
+ /* FIXME: kick libata if SATA link offline */
+ known_ev = true;
+ break;
+ default:
known_ev = false;
}
break;
@@ -3852,7 +3860,7 @@ enum {
TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */
TP_ACPI_BLUETOOTH_RESUMECTRL = 0x04, /* Bluetooth state at resume:
- off / last state */
+ 0 = disable, 1 = enable */
};
enum {
@@ -3898,10 +3906,11 @@ static int bluetooth_set_status(enum tpacpi_rfkill_state state)
}
#endif
- /* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
- status = TP_ACPI_BLUETOOTH_RESUMECTRL;
if (state == TPACPI_RFK_RADIO_ON)
- status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+ status = TP_ACPI_BLUETOOTH_RADIOSSW
+ | TP_ACPI_BLUETOOTH_RESUMECTRL;
+ else
+ status = 0;
if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
return -EIO;
@@ -4052,7 +4061,7 @@ enum {
TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */
TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */
TP_ACPI_WANCARD_RESUMECTRL = 0x04, /* Wan state at resume:
- off / last state */
+ 0 = disable, 1 = enable */
};
#define TPACPI_RFK_WWAN_SW_NAME "tpacpi_wwan_sw"
@@ -4089,10 +4098,11 @@ static int wan_set_status(enum tpacpi_rfkill_state state)
}
#endif
- /* We make sure to set TP_ACPI_WANCARD_RESUMECTRL */
- status = TP_ACPI_WANCARD_RESUMECTRL;
if (state == TPACPI_RFK_RADIO_ON)
- status |= TP_ACPI_WANCARD_RADIOSSW;
+ status = TP_ACPI_WANCARD_RADIOSSW
+ | TP_ACPI_WANCARD_RESUMECTRL;
+ else
+ status = 0;
if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
return -EIO;
@@ -5736,7 +5746,7 @@ static void thermal_exit(void)
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
- &thermal_temp_input16_group);
+ &thermal_temp_input8_group);
break;
case TPACPI_THERMAL_NONE:
default:
@@ -6094,13 +6104,13 @@ static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
/* Models with ATI GPUs that can use ECNVRAM */
- TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_EC), /* R50,51 T40-42 */
TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
- TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_EC), /* R52 */
TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
/* Models with Intel Extreme Graphics 2 */
- TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_NOEC), /* X40 */
TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
@@ -8362,6 +8372,9 @@ static int __init thinkpad_acpi_module_init(void)
return ret;
}
}
+
+ tpacpi_lifecycle = TPACPI_LIFE_RUNNING;
+
ret = input_register_device(tpacpi_inputdev);
if (ret < 0) {
printk(TPACPI_ERR "unable to register input device\n");
@@ -8371,7 +8384,6 @@ static int __init thinkpad_acpi_module_init(void)
tp_features.input_device_registered = 1;
}
- tpacpi_lifecycle = TPACPI_LIFE_RUNNING;
return 0;
}
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index be5a6b7..40845c7 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -226,6 +226,7 @@ static void __exit rtc_exit(void)
{
rtc_dev_exit();
class_destroy(rtc_class);
+ idr_destroy(&rtc_idr);
}
subsys_initcall(rtc_init);
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index 03ea530..44c4399 100644
--- a/drivers/rtc/rtc-coh901331.c
+++ b/drivers/rtc/rtc-coh901331.c
@@ -271,12 +271,13 @@ static int coh901331_resume(struct platform_device *pdev)
{
struct coh901331_port *rtap = dev_get_drvdata(&pdev->dev);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(&pdev->dev)) {
disable_irq_wake(rtap->irq);
- else
+ } else {
clk_enable(rtap->clk);
writel(rtap->irqmaskstore, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+ }
return 0;
}
#else
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 4775426..9e71ac6 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2516,7 +2516,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
- mod_timer(&info->eh_timer, 30 * HZ);
+ mod_timer(&info->eh_timer, jiffies + 30 * HZ);
spin_unlock_irqrestore(&info->host_lock, flags);
/*
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 1743640..f10bf70 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -5721,6 +5721,8 @@ _scsih_remove(struct pci_dev *pdev)
struct _sas_port *mpt2sas_port;
struct _sas_device *sas_device;
struct _sas_node *expander_sibling;
+ struct _raid_device *raid_device, *next;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
struct workqueue_struct *wq;
unsigned long flags;
@@ -5734,6 +5736,21 @@ _scsih_remove(struct pci_dev *pdev)
if (wq)
destroy_workqueue(wq);
+ /* release all the volumes */
+ list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+ list) {
+ if (raid_device->starget) {
+ sas_target_priv_data =
+ raid_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ scsi_remove_target(&raid_device->starget->dev);
+ }
+ printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
+ "(0x%016llx)\n", ioc->name, raid_device->handle,
+ (unsigned long long) raid_device->wwid);
+ _scsih_raid_device_remove(ioc, raid_device);
+ }
+
/* free ports attached to the sas_host */
retry_again:
list_for_each_entry(mpt2sas_port,
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8371d91..49ac414 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1640,8 +1640,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
int err;
+ spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
+ spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
@@ -1699,8 +1701,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
return -ENOMEM;
#endif
+ spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
+ spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f3d1d1a..65ef03c 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -453,6 +453,5 @@ extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
-extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index b20a716..b79481e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2018,7 +2018,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
spin_lock_irq(&ha->hardware_lock);
- vha = qla25xx_get_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
if (!ha->mqenable) {
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
@@ -2357,30 +2357,3 @@ int qla25xx_request_irq(struct rsp_que *rsp)
msix->rsp = rsp;
return ret;
}
-
-struct scsi_qla_host *
-qla25xx_get_host(struct rsp_que *rsp)
-{
- srb_t *sp;
- struct qla_hw_data *ha = rsp->hw;
- struct scsi_qla_host *vha = NULL;
- struct sts_entry_24xx *pkt;
- struct req_que *req;
- uint16_t que;
- uint32_t handle;
-
- pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
- que = MSW(pkt->handle);
- handle = (uint32_t) LSW(pkt->handle);
- req = ha->req_q_map[que];
- if (handle < MAX_OUTSTANDING_COMMANDS) {
- sp = req->outstanding_cmds[handle];
- if (sp)
- return sp->fcport->vha;
- else
- goto base_que;
- }
-base_que:
- vha = pci_get_drvdata(ha->pdev);
- return vha;
-}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index e07b361..4a69cc8 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -638,11 +638,15 @@ failed:
static void qla_do_work(struct work_struct *work)
{
+ unsigned long flags;
struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
struct scsi_qla_host *vha;
+ struct qla_hw_data *ha = rsp->hw;
- vha = qla25xx_get_host(rsp);
+ spin_lock_irqsave(&rsp->hw->hardware_lock, flags);
+ vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
+ spin_unlock_irqrestore(&rsp->hw->hardware_lock, flags);
}
/* create response queue */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f1..8c0dd13 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1279,7 +1279,7 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->use_irda = 1;
#endif
- if (pdata->init) {
+ if (pdata && pdata->init) {
ret = pdata->init(pdev);
if (ret)
goto clkput;
@@ -1292,7 +1292,7 @@ static int serial_imx_probe(struct platform_device *pdev)
return 0;
deinit:
- if (pdata->exit)
+ if (pdata && pdata->exit)
pdata->exit(pdev);
clkput:
clk_put(sport->clk);
@@ -1321,7 +1321,7 @@ static int serial_imx_remove(struct platform_device *pdev)
clk_disable(sport->clk);
- if (pdata->exit)
+ if (pdata && pdata->exit)
pdata->exit(pdev);
iounmap(sport->port.membase);
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d21b346..b926b00 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -81,8 +81,6 @@ source "drivers/staging/rtl8192su/Kconfig"
source "drivers/staging/rtl8192e/Kconfig"
-source "drivers/staging/mimio/Kconfig"
-
source "drivers/staging/frontier/Kconfig"
source "drivers/staging/android/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8cbf1ae..030d8f8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_ALTERA_PCIE_CHDMA) += altpciechdma/
obj-$(CONFIG_RTL8187SE) += rtl8187se/
obj-$(CONFIG_RTL8192SU) += rtl8192su/
obj-$(CONFIG_RTL8192E) += rtl8192e/
-obj-$(CONFIG_INPUT_MIMIO) += mimio/
obj-$(CONFIG_TRANZPORT) += frontier/
obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_ANDROID) += dream/
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index 894eecf..6acc49a 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -24,6 +24,8 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/sysctl.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
#include "osd.h"
#include "logging.h"
#include "vmbus.h"
@@ -946,6 +948,19 @@ static irqreturn_t vmbus_isr(int irq, void *dev_id)
}
}
+static struct dmi_system_id __initdata microsoft_hv_dmi_table[] = {
+ {
+ .ident = "Hyper-V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+ },
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, microsoft_hv_dmi_table);
+
static int __init vmbus_init(void)
{
int ret = 0;
@@ -957,6 +972,9 @@ static int __init vmbus_init(void)
vmbus_loglevel, HIWORD(vmbus_loglevel), LOWORD(vmbus_loglevel));
/* Todo: it is used for loglevel, to be ported to new kernel. */
+ if (!dmi_check_system(microsoft_hv_dmi_table))
+ return -ENODEV;
+
ret = vmbus_bus_init(VmbusInitialize);
DPRINT_EXIT(VMBUS_DRV);
@@ -973,6 +991,18 @@ static void __exit vmbus_exit(void)
return;
}
+/*
+ * We use a PCI table to determine if we should autoload this driver This is
+ * needed by distro tools to determine if the hyperv drivers should be
+ * installed and/or configured. We don't do anything else with the table, but
+ * it needs to be present.
+ */
+const static struct pci_device_id microsoft_hv_pci_table[] = {
+ { PCI_DEVICE(0x1414, 0x5353) }, /* VGA compatible controller */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, microsoft_hv_pci_table);
+
MODULE_LICENSE("GPL");
module_param(vmbus_irq, int, S_IRUGO);
module_param(vmbus_loglevel, int, S_IRUGO);
diff --git a/drivers/staging/mimio/Kconfig b/drivers/staging/mimio/Kconfig
deleted file mode 100644
index 505dcb2..0000000
--- a/drivers/staging/mimio/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config INPUT_MIMIO
- tristate "Mimio Xi interactive whiteboard support"
- depends on USB && INPUT
- default N
- help
- Say Y here if you want to use a Mimio Xi interactive
- whiteboard device.
-
- To compile this driver as a module, choose M here: the
- module will be called mimio.
diff --git a/drivers/staging/mimio/Makefile b/drivers/staging/mimio/Makefile
deleted file mode 100644
index 77807ee..0000000
--- a/drivers/staging/mimio/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_INPUT_MIMIO) += mimio.o
diff --git a/drivers/staging/mimio/mimio.c b/drivers/staging/mimio/mimio.c
deleted file mode 100644
index 1ba8103..0000000
--- a/drivers/staging/mimio/mimio.c
+++ /dev/null
@@ -1,914 +0,0 @@
-/*
- * Hardware event => input event mapping:
- *
- *
- *
- input.h:#define BTN_TOOL_PEN 0x140 black
- input.h:#define BTN_TOOL_RUBBER 0x141 blue
- input.h:#define BTN_TOOL_BRUSH 0x142 green
- input.h:#define BTN_TOOL_PENCIL 0x143 red
- input.h:#define BTN_TOOL_AIRBRUSH 0x144 eraser
- input.h:#define BTN_TOOL_FINGER 0x145 small eraser
- input.h:#define BTN_TOOL_MOUSE 0x146 mimio interactive
- input.h:#define BTN_TOOL_LENS 0x147 mimio interactive but1
- input.h:#define LOCALBTN_TOOL_EXTRA1 0x14a mimio interactive but2 == BTN_TOUCH
- input.h:#define LOCALBTN_TOOL_EXTRA2 0x14b mimio extra pens (orange, brown, yellow, purple) == BTN_STYLUS
- input.h:#define LOCALBTN_TOOL_EXTRA3 0x14c unused == BTN_STYLUS2
- input.h:#define BTN_TOOL_DOUBLETAP 0x14d unused
- input.h:#define BTN_TOOL_TRIPLETAP 0x14e unused
- *
- * MIMIO_EV_PENDOWN(MIMIO_PEN_K) => EV_KEY BIT(BTN_TOOL_PEN)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_B) => EV_KEY BIT(BTN_TOOL_RUBBER)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_G) => EV_KEY BIT(BTN_TOOL_BRUSH)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_R) => EV_KEY BIT(BTN_TOOL_PENCIL)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_E) => EV_KEY BIT(BTN_TOOL_AIRBRUSH)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_ES) => EV_KEY BIT(BTN_TOOL_FINGER)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_I) => EV_KEY BIT(BTN_TOOL_MOUSE)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_IL) => EV_KEY BIT(BTN_TOOL_LENS)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_IR) => EV_KEY BIT(BTN_TOOL_DOUBLETAP)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_EX) => EV_KEY BIT(BTN_TOOL_TRIPLETAP)
- * MIMIO_EV_PENDATA => EV_ABS BIT(ABS_X), BIT(ABS_Y)
- * MIMIO_EV_MEMRESET => EV_KEY BIT(BTN_0)
- * MIMIO_EV_ACC(ACC_NEWPAGE) => EV_KEY BIT(BTN_1)
- * MIMIO_EV_ACC(ACC_TAGPAGE) => EV_KEY BIT(BTN_2)
- * MIMIO_EV_ACC(ACC_PRINTPAGE) => EV_KEY BIT(BTN_3)
- * MIMIO_EV_ACC(ACC_MAXIMIZE) => EV_KEY BIT(BTN_4)
- * MIMIO_EV_ACC(ACC_FINDCTLPNL) => EV_KEY BIT(BTN_5)
- *
- *
- * open issues:
- * - cold-load of data captured when mimio in standalone mode not yet
- * supported; need to snoop Win32 box to see datastream for this.
- * - mimio mouse not yet supported; need to snoop Win32 box to see the
- * datastream for this.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-
-#define DRIVER_VERSION "v0.031"
-#define DRIVER_AUTHOR "mwilder@...nmsu.edu"
-#define DRIVER_DESC "USB mimio-xi driver"
-
-enum {UPVALUE, DOWNVALUE, MOVEVALUE};
-
-#define MIMIO_XRANGE_MAX 9600
-#define MIMIO_YRANGE_MAX 4800
-
-#define LOCALBTN_TOOL_EXTRA1 BTN_TOUCH
-#define LOCALBTN_TOOL_EXTRA2 BTN_STYLUS
-#define LOCALBTN_TOOL_EXTRA3 BTN_STYLUS2
-
-#define MIMIO_VENDOR_ID 0x08d3
-#define MIMIO_PRODUCT_ID 0x0001
-#define MIMIO_MAXPAYLOAD (8)
-#define MIMIO_MAXNAMELEN (64)
-#define MIMIO_TXWAIT (1)
-#define MIMIO_TXDONE (2)
-
-#define MIMIO_EV_PENDOWN (0x22)
-#define MIMIO_EV_PENDATA (0x24)
-#define MIMIO_EV_PENUP (0x51)
-#define MIMIO_EV_MEMRESET (0x45)
-#define MIMIO_EV_ACC (0xb2)
-
-#define MIMIO_PEN_K (1) /* black pen */
-#define MIMIO_PEN_B (2) /* blue pen */
-#define MIMIO_PEN_G (3) /* green pen */
-#define MIMIO_PEN_R (4) /* red pen */
-/* 5, 6, 7, 8 are extra pens */
-#define MIMIO_PEN_E (9) /* big eraser */
-#define MIMIO_PEN_ES (10) /* lil eraser */
-#define MIMIO_PENJUMP_START (10)
-#define MIMIO_PENJUMP (6)
-#define MIMIO_PEN_I (17) /* mimio interactive */
-#define MIMIO_PEN_IL (18) /* mimio interactive button 1 */
-#define MIMIO_PEN_IR (19) /* mimio interactive button 2 */
-
-#define MIMIO_PEN_MAX (MIMIO_PEN_IR)
-
-#define ACC_DONE (0)
-#define ACC_NEWPAGE (1)
-#define ACC_TAGPAGE (2)
-#define ACC_PRINTPAGE (4)
-#define ACC_MAXIMIZE (8)
-#define ACC_FINDCTLPNL (16)
-
-#define isvalidtxsize(n) ((n) > 0 && (n) <= MIMIO_MAXPAYLOAD)
-
-
-struct pktbuf {
- unsigned char instr;
- unsigned char buf[16];
- unsigned char *p;
- unsigned char *q;
-};
-
-struct usbintendpt {
- dma_addr_t dma;
- struct urb *urb;
- unsigned char *buf;
- struct usb_endpoint_descriptor *desc;
-};
-
-struct mimio {
- struct input_dev *idev;
- struct usb_device *udev;
- struct usb_interface *uifc;
- int open;
- int present;
- int greeted;
- int txflags;
- char phys[MIMIO_MAXNAMELEN];
- struct usbintendpt in;
- struct usbintendpt out;
- struct pktbuf pktbuf;
- unsigned char minor;
- wait_queue_head_t waitq;
- spinlock_t txlock;
- void (*rxhandler)(struct mimio *, unsigned char *, unsigned int);
- int last_pen_down;
-};
-
-static void mimio_close(struct input_dev *);
-static void mimio_dealloc(struct mimio *);
-static void mimio_disconnect(struct usb_interface *);
-static int mimio_greet(struct mimio *);
-static void mimio_irq_in(struct urb *);
-static void mimio_irq_out(struct urb *);
-static int mimio_open(struct input_dev *);
-static int mimio_probe(struct usb_interface *, const struct usb_device_id *);
-static void mimio_rx_handler(struct mimio *, unsigned char *, unsigned int);
-static int mimio_tx(struct mimio *, const char *, int);
-
-static char mimio_name[] = "VirtualInk mimio-Xi";
-static struct usb_device_id mimio_table [] = {
- { USB_DEVICE(MIMIO_VENDOR_ID, MIMIO_PRODUCT_ID) },
- { USB_DEVICE(0x0525, 0xa4a0) }, /* gadget zero firmware */
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, mimio_table);
-
-static struct usb_driver mimio_driver = {
- .name = "mimio",
- .probe = mimio_probe,
- .disconnect = mimio_disconnect,
- .id_table = mimio_table,
-};
-
-static DECLARE_MUTEX(disconnect_sem);
-
-static void mimio_close(struct input_dev *idev)
-{
- struct mimio *mimio;
-
- mimio = input_get_drvdata(idev);
- if (!mimio) {
- dev_err(&idev->dev, "null mimio attached to input device\n");
- return;
- }
-
- if (mimio->open <= 0)
- dev_err(&idev->dev, "mimio not open.\n");
- else
- mimio->open--;
-
- if (mimio->present == 0 && mimio->open == 0)
- mimio_dealloc(mimio);
-}
-
-static void mimio_dealloc(struct mimio *mimio)
-{
- if (mimio == NULL)
- return;
-
- usb_kill_urb(mimio->in.urb);
-
- usb_kill_urb(mimio->out.urb);
-
- if (mimio->idev) {
- input_unregister_device(mimio->idev);
- if (mimio->idev->grab)
- input_close_device(mimio->idev->grab);
- else
- dev_dbg(&mimio->idev->dev, "mimio->idev->grab == NULL"
- " -- didn't call input_close_device\n");
- }
-
- usb_free_urb(mimio->in.urb);
-
- usb_free_urb(mimio->out.urb);
-
- if (mimio->in.buf) {
- usb_buffer_free(mimio->udev, MIMIO_MAXPAYLOAD, mimio->in.buf,
- mimio->in.dma);
- }
-
- if (mimio->out.buf)
- usb_buffer_free(mimio->udev, MIMIO_MAXPAYLOAD, mimio->out.buf,
- mimio->out.dma);
-
- if (mimio->idev)
- input_free_device(mimio->idev);
-
- kfree(mimio);
-}
-
-static void mimio_disconnect(struct usb_interface *ifc)
-{
- struct mimio *mimio;
-
- down(&disconnect_sem);
-
- mimio = usb_get_intfdata(ifc);
- usb_set_intfdata(ifc, NULL);
- dev_dbg(&mimio->idev->dev, "disconnect\n");
-
- if (mimio) {
- mimio->present = 0;
-
- if (mimio->open <= 0)
- mimio_dealloc(mimio);
- }
-
- up(&disconnect_sem);
-}
-
-static int mimio_greet(struct mimio *mimio)
-{
- const struct grtpkt {
- int nbytes;
- unsigned delay;
- char data[8];
- } grtpkts[] = {
- { 3, 0, { 0x11, 0x55, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x53, 0x55, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x43, 0x55, 0x00, 0x00, 0x16, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x33, 0x55, 0x00, 0x00, 0x66, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x13, 0x00, 0x5e, 0x02, 0x4f, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x13, 0x00, 0x04, 0x03, 0x14, 0x00, 0x00, 0x00 } },
- { 5, 2, { 0x13, 0x00, 0x00, 0x04, 0x17, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x13, 0x00, 0x0d, 0x08, 0x16, 0x00, 0x00, 0x00 } },
- { 5, 0, { 0x13, 0x00, 0x4d, 0x01, 0x5f, 0x00, 0x00, 0x00 } },
- { 3, 0, { 0xf1, 0x55, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00 } },
- { 7, 2, { 0x52, 0x55, 0x00, 0x07, 0x31, 0x55, 0x64, 0x00 } },
- { 0, 0, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } },
- };
- int rslt;
- const struct grtpkt *pkt;
-
- for (pkt = grtpkts; pkt->nbytes; pkt++) {
- rslt = mimio_tx(mimio, pkt->data, pkt->nbytes);
- if (rslt)
- return rslt;
- if (pkt->delay)
- msleep(pkt->delay);
- }
-
- return 0;
-}
-
-static void mimio_irq_in(struct urb *urb)
-{
- int rslt;
- char *data;
- const char *reason = "going down";
- struct mimio *mimio;
-
- mimio = urb->context;
-
- if (mimio == NULL)
- /* paranoia */
- return;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ETIMEDOUT:
- reason = "timeout -- unplugged?";
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&mimio->idev->dev, "%s.\n", reason);
- return;
- default:
- dev_dbg(&mimio->idev->dev, "unknown urb-status: %d.\n",
- urb->status);
- goto exit;
- }
- data = mimio->in.buf;
-
- if (mimio->rxhandler)
- mimio->rxhandler(mimio, data, urb->actual_length);
-exit:
- /*
- * Keep listening to device on same urb.
- */
- rslt = usb_submit_urb(urb, GFP_ATOMIC);
- if (rslt)
- dev_err(&mimio->idev->dev, "usb_submit_urb failure: %d.\n",
- rslt);
-}
-
-static void mimio_irq_out(struct urb *urb)
-{
- unsigned long flags;
- struct mimio *mimio;
-
- mimio = urb->context;
-
- if (urb->status)
- dev_dbg(&mimio->idev->dev, "urb-status: %d.\n", urb->status);
-
- spin_lock_irqsave(&mimio->txlock, flags);
- mimio->txflags |= MIMIO_TXDONE;
- spin_unlock_irqrestore(&mimio->txlock, flags);
- wmb();
- wake_up(&mimio->waitq);
-}
-
-static int mimio_open(struct input_dev *idev)
-{
- int rslt;
- struct mimio *mimio;
-
- rslt = 0;
- down(&disconnect_sem);
- mimio = input_get_drvdata(idev);
- dev_dbg(&idev->dev, "mimio_open\n");
-
- if (mimio == NULL) {
- dev_err(&idev->dev, "null mimio.\n");
- rslt = -ENODEV;
- goto exit;
- }
-
- if (mimio->open++)
- goto exit;
-
- if (mimio->present && !mimio->greeted) {
- struct urb *urb = mimio->in.urb;
- mimio->in.urb->dev = mimio->udev;
- rslt = usb_submit_urb(mimio->in.urb, GFP_KERNEL);
- if (rslt) {
- dev_err(&idev->dev, "usb_submit_urb failure "
- "(res = %d: %s). Not greeting.\n",
- rslt,
- (!urb ? "urb is NULL" :
- (urb->hcpriv ? "urb->hcpriv is non-NULL" :
- (!urb->complete ? "urb is not complete" :
- (urb->number_of_packets <= 0 ? "urb has no packets" :
- (urb->interval <= 0 ? "urb interval too small" :
- "urb interval too large or some other error"))))));
- rslt = -EIO;
- goto exit;
- }
- rslt = mimio_greet(mimio);
- if (rslt == 0) {
- dev_dbg(&idev->dev, "Mimio greeted OK.\n");
- mimio->greeted = 1;
- } else {
- dev_dbg(&idev->dev, "Mimio greet Failure (%d)\n",
- rslt);
- }
- }
-
-exit:
- up(&disconnect_sem);
- return rslt;
-}
-
-static int mimio_probe(struct usb_interface *ifc,
- const struct usb_device_id *id)
-{
- char path[64];
- int pipe, maxp;
- struct mimio *mimio;
- struct usb_device *udev;
- struct usb_host_interface *hostifc;
- struct input_dev *input_dev;
- int res = 0;
- int i;
-
- udev = interface_to_usbdev(ifc);
-
- mimio = kzalloc(sizeof(struct mimio), GFP_KERNEL);
- if (!mimio)
- return -ENOMEM;
-
- input_dev = input_allocate_device();
- if (!input_dev) {
- mimio_dealloc(mimio);
- return -ENOMEM;
- }
-
- mimio->uifc = ifc;
- mimio->udev = udev;
- mimio->pktbuf.p = mimio->pktbuf.buf;
- mimio->pktbuf.q = mimio->pktbuf.buf;
- /* init_input_dev(mimio->idev); */
- mimio->idev = input_dev;
- init_waitqueue_head(&mimio->waitq);
- spin_lock_init(&mimio->txlock);
- hostifc = ifc->cur_altsetting;
-
- if (hostifc->desc.bNumEndpoints != 2) {
- dev_err(&udev->dev, "Unexpected endpoint count: %d.\n",
- hostifc->desc.bNumEndpoints);
- mimio_dealloc(mimio);
- return -ENODEV;
- }
-
- mimio->in.desc = &(hostifc->endpoint[0].desc);
- mimio->out.desc = &(hostifc->endpoint[1].desc);
-
- mimio->in.buf = usb_buffer_alloc(udev, MIMIO_MAXPAYLOAD, GFP_KERNEL,
- &mimio->in.dma);
- mimio->out.buf = usb_buffer_alloc(udev, MIMIO_MAXPAYLOAD, GFP_KERNEL,
- &mimio->out.dma);
-
- if (mimio->in.buf == NULL || mimio->out.buf == NULL) {
- dev_err(&udev->dev, "usb_buffer_alloc failure.\n");
- mimio_dealloc(mimio);
- return -ENOMEM;
- }
-
- mimio->in.urb = usb_alloc_urb(0, GFP_KERNEL);
- mimio->out.urb = usb_alloc_urb(0, GFP_KERNEL);
-
- if (mimio->in.urb == NULL || mimio->out.urb == NULL) {
- dev_err(&udev->dev, "usb_alloc_urb failure.\n");
- mimio_dealloc(mimio);
- return -ENOMEM;
- }
-
- /*
- * Build the input urb.
- */
- pipe = usb_rcvintpipe(udev, mimio->in.desc->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if (maxp > MIMIO_MAXPAYLOAD)
- maxp = MIMIO_MAXPAYLOAD;
- usb_fill_int_urb(mimio->in.urb, udev, pipe, mimio->in.buf, maxp,
- mimio_irq_in, mimio, mimio->in.desc->bInterval);
- mimio->in.urb->transfer_dma = mimio->in.dma;
- mimio->in.urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /*
- * Build the output urb.
- */
- pipe = usb_sndintpipe(udev, mimio->out.desc->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if (maxp > MIMIO_MAXPAYLOAD)
- maxp = MIMIO_MAXPAYLOAD;
- usb_fill_int_urb(mimio->out.urb, udev, pipe, mimio->out.buf, maxp,
- mimio_irq_out, mimio, mimio->out.desc->bInterval);
- mimio->out.urb->transfer_dma = mimio->out.dma;
- mimio->out.urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /*
- * Build input device info
- */
- usb_make_path(udev, path, 64);
- snprintf(mimio->phys, MIMIO_MAXNAMELEN, "%s/input0", path);
- input_set_drvdata(input_dev, mimio);
- /* input_dev->dev = &ifc->dev; */
- input_dev->open = mimio_open;
- input_dev->close = mimio_close;
- input_dev->name = mimio_name;
- input_dev->phys = mimio->phys;
- input_dev->dev.parent = &ifc->dev;
-
- input_dev->id.bustype = BUS_USB;
- input_dev->id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- input_dev->id.product = le16_to_cpu(udev->descriptor.idProduct);
- input_dev->id.version = le16_to_cpu(udev->descriptor.bcdDevice);
-
- input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
- for (i = BTN_TOOL_PEN; i <= LOCALBTN_TOOL_EXTRA2; ++i)
- set_bit(i, input_dev->keybit);
-
- input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
- BIT_MASK(BTN_1) |
- BIT_MASK(BTN_2) |
- BIT_MASK(BTN_3) |
- BIT_MASK(BTN_4) |
- BIT_MASK(BTN_5);
- /* input_dev->keybit[BTN_MOUSE] |= BIT(BTN_LEFT); */
- input_dev->absbit[0] |= BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
- input_set_abs_params(input_dev, ABS_X, 0, MIMIO_XRANGE_MAX, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, MIMIO_YRANGE_MAX, 0, 0);
- input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
-
-#if 0
- input_dev->absmin[ABS_X] = 0;
- input_dev->absmin[ABS_Y] = 0;
- input_dev->absmax[ABS_X] = 9600;
- input_dev->absmax[ABS_Y] = 4800;
- input_dev->absfuzz[ABS_X] = 0;
- input_dev->absfuzz[ABS_Y] = 0;
- input_dev->absflat[ABS_X] = 0;
- input_dev->absflat[ABS_Y] = 0;
-#endif
-
-#if 0
- /* this will just reduce the precision */
- input_dev->absfuzz[ABS_X] = 8; /* experimental; may need to change */
- input_dev->absfuzz[ABS_Y] = 8; /* experimental; may need to change */
-#endif
-
- /*
- * Register the input device.
- */
- res = input_register_device(mimio->idev);
- if (res) {
- dev_err(&udev->dev, "input_register_device failure (%d)\n",
- res);
- mimio_dealloc(mimio);
- return -EIO;
- }
- dev_dbg(&mimio->idev->dev, "input: %s on %s (res = %d).\n",
- input_dev->name, input_dev->phys, res);
-
- usb_set_intfdata(ifc, mimio);
- mimio->present = 1;
-
- /*
- * Submit the input urb to the usb subsystem.
- */
- mimio->in.urb->dev = mimio->udev;
- res = usb_submit_urb(mimio->in.urb, GFP_KERNEL);
- if (res) {
- dev_err(&mimio->idev->dev, "usb_submit_urb failure (%d)\n",
- res);
- mimio_dealloc(mimio);
- return -EIO;
- }
-
- /*
- * Attempt to greet the mimio after giving
- * it some post-init settling time.
- *
- * note: sometimes this sleep interval isn't
- * long enough to permit the device to re-init
- * after a hot-swap; maybe need to bump it up.
- *
- * As it is, this probably breaks module unloading support!
- */
- msleep(1024);
-
- res = mimio_greet(mimio);
- if (res == 0) {
- dev_dbg(&mimio->idev->dev, "Mimio greeted OK.\n");
- mimio->greeted = 1;
- mimio->rxhandler = mimio_rx_handler;
- } else {
- dev_dbg(&mimio->idev->dev, "Mimio greet Failure (%d)\n", res);
- }
-
- return 0;
-}
-
-static int handle_mimio_rx_penupdown(struct mimio *mimio,
- int down,
- const char *const instr[],
- const int instr_ofst[])
-{
- int penid, x;
- if (mimio->pktbuf.q - mimio->pktbuf.p < (down ? 4 : 3))
- return 1; /* partial pkt */
-
- if (down) {
- x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
- *(mimio->pktbuf.p + 2);
- if (x != *(mimio->pktbuf.p + 3)) {
- dev_dbg(&mimio->idev->dev, "EV_PEN%s: bad xsum.\n",
- down ? "DOWN":"UP");
- /* skip this event data */
- mimio->pktbuf.p += 4;
- /* decode any remaining events */
- return 0;
- }
- penid = mimio->pktbuf.instr = *(mimio->pktbuf.p + 2);
- if (penid > MIMIO_PEN_MAX) {
- dev_dbg(&mimio->idev->dev,
- "Unmapped penID (not in [0, %d]): %d\n",
- MIMIO_PEN_MAX, (int)mimio->pktbuf.instr);
- penid = mimio->pktbuf.instr = 0;
- }
- mimio->last_pen_down = penid;
- } else {
- penid = mimio->last_pen_down;
- }
- dev_dbg(&mimio->idev->dev, "%s (id %d, code %d) %s.\n", instr[penid],
- instr_ofst[penid], penid, down ? "down" : "up");
-
- if (instr_ofst[penid] >= 0) {
- int code = BTN_TOOL_PEN + instr_ofst[penid];
- int value = down ? DOWNVALUE : UPVALUE;
- if (code > KEY_MAX)
- dev_dbg(&mimio->idev->dev, "input_event will ignore "
- "-- code (%d) > KEY_MAX\n", code);
- if (!test_bit(code, mimio->idev->keybit))
- dev_dbg(&mimio->idev->dev, "input_event will ignore "
- "-- bit for code (%d) not enabled\n", code);
- if (!!test_bit(code, mimio->idev->key) == value)
- dev_dbg(&mimio->idev->dev, "input_event will ignore "
- "-- bit for code (%d) already set to %d\n",
- code, value);
- if (value != DOWNVALUE) {
- /* input_regs(mimio->idev, regs); */
- input_report_key(mimio->idev, code, value);
- input_sync(mimio->idev);
- } else {
- /* wait until we get some coordinates */
- }
- } else {
- dev_dbg(&mimio->idev->dev, "penID offset[%d] == %d is < 0 "
- "- not sending\n", penid, instr_ofst[penid]);
- }
- mimio->pktbuf.p += down ? 4 : 3; /* 3 for up, 4 for down */
- return 0;
-}
-
-/*
- * Stay tuned for partial-packet excitement.
- *
- * This routine buffers data packets received from the mimio device
- * in the mimio's data space. This buffering is necessary because
- * the mimio's in endpoint can serve us partial packets of data, and
- * we want the driver to support the servicing of multiple mimios.
- * Empirical evidence gathered so far suggests that the method of
- * buffering packet data in the mimio's data space works. Previous
- * versions of this driver did not buffer packet data in each mimio's
- * data-space, and were therefore not able to service multiple mimios.
- * Note that since the caller of this routine is running in interrupt
- * context, care needs to be taken to ensure that this routine does not
- * become bloated, and it may be that another spinlock is needed in each
- * mimio to guard the buffered packet data properly.
- */
-static void mimio_rx_handler(struct mimio *mimio,
- unsigned char *data,
- unsigned int nbytes)
-{
- struct device *dev = &mimio->idev->dev;
- unsigned int x;
- unsigned int y;
- static const char * const instr[] = {
- "?0",
- "black pen", "blue pen", "green pen", "red pen",
- "brown pen", "orange pen", "purple pen", "yellow pen",
- "big eraser", "lil eraser",
- "?11", "?12", "?13", "?14", "?15", "?16",
- "mimio interactive", "interactive button1",
- "interactive button2"
- };
-
- /* Mimio Interactive gives:
- * down: [0x22 0x01 0x11 0x32 0x24]
- * b1 : [0x22 0x01 0x12 0x31 0x24]
- * b2 : [0x22 0x01 0x13 0x30 0x24]
- */
- static const int instr_ofst[] = {
- -1,
- 0, 1, 2, 3,
- 9, 9, 9, 9,
- 4, 5,
- -1, -1, -1, -1, -1, -1,
- 6, 7, 8,
- };
-
- memcpy(mimio->pktbuf.q, data, nbytes);
- mimio->pktbuf.q += nbytes;
-
- while (mimio->pktbuf.p < mimio->pktbuf.q) {
- int t = *mimio->pktbuf.p;
- switch (t) {
- case MIMIO_EV_PENUP:
- case MIMIO_EV_PENDOWN:
- if (handle_mimio_rx_penupdown(mimio,
- t == MIMIO_EV_PENDOWN,
- instr, instr_ofst))
- return; /* partial packet */
- break;
-
- case MIMIO_EV_PENDATA:
- if (mimio->pktbuf.q - mimio->pktbuf.p < 6)
- /* partial pkt */
- return;
- x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
- *(mimio->pktbuf.p + 2) ^
- *(mimio->pktbuf.p + 3) ^
- *(mimio->pktbuf.p + 4);
- if (x != *(mimio->pktbuf.p + 5)) {
- dev_dbg(dev, "EV_PENDATA: bad xsum.\n");
- mimio->pktbuf.p += 6; /* skip this event data */
- break; /* decode any remaining events */
- }
- x = *(mimio->pktbuf.p + 1);
- x <<= 8;
- x |= *(mimio->pktbuf.p + 2);
- y = *(mimio->pktbuf.p + 3);
- y <<= 8;
- y |= *(mimio->pktbuf.p + 4);
- dev_dbg(dev, "coord: (%d, %d)\n", x, y);
- if (instr_ofst[mimio->pktbuf.instr] >= 0) {
- int code = BTN_TOOL_PEN +
- instr_ofst[mimio->last_pen_down];
-#if 0
- /* Utter hack to ensure we get forwarded _AND_
- * so we can identify when a complete signal is
- * received */
- mimio->idev->abs[ABS_Y] = -1;
- mimio->idev->abs[ABS_X] = -1;
-#endif
- /* input_regs(mimio->idev, regs); */
- input_report_abs(mimio->idev, ABS_X, x);
- input_report_abs(mimio->idev, ABS_Y, y);
- /* fake a penup */
- change_bit(code, mimio->idev->key);
- input_report_key(mimio->idev,
- code,
- DOWNVALUE);
- /* always sync here */
- mimio->idev->sync = 0;
- input_sync(mimio->idev);
- }
- mimio->pktbuf.p += 6;
- break;
- case MIMIO_EV_MEMRESET:
- if (mimio->pktbuf.q - mimio->pktbuf.p < 7)
- /* partial pkt */
- return;
- dev_dbg(dev, "mem-reset.\n");
- /* input_regs(mimio->idev, regs); */
- input_event(mimio->idev, EV_KEY, BTN_0, 1);
- input_event(mimio->idev, EV_KEY, BTN_0, 0);
- input_sync(mimio->idev);
- mimio->pktbuf.p += 7;
- break;
- case MIMIO_EV_ACC:
- if (mimio->pktbuf.q - mimio->pktbuf.p < 4)
- /* partial pkt */
- return;
- x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
- *(mimio->pktbuf.p + 2);
- if (x != *(mimio->pktbuf.p + 3)) {
- dev_dbg(dev, "EV_ACC: bad xsum.\n");
- mimio->pktbuf.p += 4; /* skip this event data */
- break; /* decode any remaining events */
- }
- switch (*(mimio->pktbuf.p + 2)) {
- case ACC_NEWPAGE:
- dev_dbg(&mimio->idev->dev, "new-page.\n");
- /* input_regs(mimio->idev, regs); */
- input_event(mimio->idev, EV_KEY, BTN_1, 1);
- input_event(mimio->idev, EV_KEY, BTN_1, 0);
- input_sync(mimio->idev);
- break;
- case ACC_TAGPAGE:
- dev_dbg(&mimio->idev->dev, "tag-page.\n");
- /* input_regs(mimio->idev, regs); */
- input_event(mimio->idev, EV_KEY, BTN_2, 1);
- input_event(mimio->idev, EV_KEY, BTN_2, 0);
- input_sync(mimio->idev);
- break;
- case ACC_PRINTPAGE:
- dev_dbg(&mimio->idev->dev, "print-page.\n");
- /* input_regs(mimio->idev, regs);*/
- input_event(mimio->idev, EV_KEY, BTN_3, 1);
- input_event(mimio->idev, EV_KEY, BTN_3, 0);
- input_sync(mimio->idev);
- break;
- case ACC_MAXIMIZE:
- dev_dbg(&mimio->idev->dev,
- "maximize-window.\n");
- /* input_regs(mimio->idev, regs); */
- input_event(mimio->idev, EV_KEY, BTN_4, 1);
- input_event(mimio->idev, EV_KEY, BTN_4, 0);
- input_sync(mimio->idev);
- break;
- case ACC_FINDCTLPNL:
- dev_dbg(&mimio->idev->dev, "find-ctl-panel.\n");
- /* input_regs(mimio->idev, regs); */
- input_event(mimio->idev, EV_KEY, BTN_5, 1);
- input_event(mimio->idev, EV_KEY, BTN_5, 0);
- input_sync(mimio->idev);
- break;
- case ACC_DONE:
- dev_dbg(&mimio->idev->dev, "acc-done.\n");
- /* no event is dispatched to the input
- * subsystem for this device event.
- */
- break;
- default:
- dev_dbg(dev, "unknown acc event.\n");
- break;
- }
- mimio->pktbuf.p += 4;
- break;
- default:
- mimio->pktbuf.p++;
- break;
- }
- }
-
- /*
- * No partial event was received, so reset mimio's pktbuf ptrs.
- */
- mimio->pktbuf.p = mimio->pktbuf.q = mimio->pktbuf.buf;
-}
-
-static int mimio_tx(struct mimio *mimio, const char *buf, int nbytes)
-{
- int rslt;
- int timeout;
- unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
-
- if (!(isvalidtxsize(nbytes))) {
- dev_err(&mimio->idev->dev, "invalid arg: nbytes: %d.\n",
- nbytes);
- return -EINVAL;
- }
-
- /*
- * Init the out urb and copy the data to send.
- */
- mimio->out.urb->dev = mimio->udev;
- mimio->out.urb->transfer_buffer_length = nbytes;
- memcpy(mimio->out.urb->transfer_buffer, buf, nbytes);
-
- /*
- * Send the data.
- */
- spin_lock_irqsave(&mimio->txlock, flags);
- mimio->txflags = MIMIO_TXWAIT;
- rslt = usb_submit_urb(mimio->out.urb, GFP_ATOMIC);
- spin_unlock_irqrestore(&mimio->txlock, flags);
- dev_dbg(&mimio->idev->dev, "rslt: %d.\n", rslt);
-
- if (rslt) {
- dev_err(&mimio->idev->dev, "usb_submit_urb failure: %d.\n",
- rslt);
- return rslt;
- }
-
- /*
- * Wait for completion to be signalled (the mimio_irq_out
- * completion routine will or MIMIO_TXDONE in with txflags).
- */
- timeout = HZ;
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&mimio->waitq, &wait);
-
- while (timeout && ((mimio->txflags & MIMIO_TXDONE) == 0)) {
- timeout = schedule_timeout(timeout);
- rmb();
- }
-
- if ((mimio->txflags & MIMIO_TXDONE) == 0)
- dev_dbg(&mimio->idev->dev, "tx timed out.\n");
-
- /*
- * Now that completion has been signalled,
- * unlink the urb so that it can be recycled.
- */
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&mimio->waitq, &wait);
- usb_unlink_urb(mimio->out.urb);
-
- return rslt;
-}
-
-static int __init mimio_init(void)
-{
- int rslt;
-
- rslt = usb_register(&mimio_driver);
- if (rslt != 0) {
- err("%s: usb_register failure: %d", __func__, rslt);
- return rslt;
- }
-
- printk(KERN_INFO KBUILD_MODNAME ":"
- DRIVER_DESC " " DRIVER_VERSION "\n");
- return rslt;
-}
-
-static void __exit mimio_exit(void)
-{
- usb_deregister(&mimio_driver);
-}
-
-module_init(mimio_init);
-module_exit(mimio_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 4f86447..5d80d5e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -625,9 +625,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
- /* driver is often null here; dev_dbg() would oops */
- pr_debug("usb %s: uevent\n", dev_name(dev));
-
if (is_usb_device(dev)) {
usb_dev = to_usb_device(dev);
} else if (is_usb_interface(dev)) {
@@ -639,6 +636,7 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
}
if (usb_dev->devnum < 0) {
+ /* driver is often null here; dev_dbg() would oops */
pr_debug("usb %s: already deleted?\n", dev_name(dev));
return -ENODEV;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 34de475..24e6205 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -140,7 +140,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
- 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
+ 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 79782a1..bcbe104 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -234,7 +234,7 @@ struct hc_driver {
/* xHCI specific functions */
/* Called by usb_alloc_dev to alloc HC device structures */
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
- /* Called by usb_release_dev to free HC device structures */
+ /* Called by usb_disconnect to free HC device structures */
void (*free_dev)(struct usb_hcd *, struct usb_device *);
/* Bandwidth computation functions */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1a7d54b..ed3aa7a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1508,6 +1508,15 @@ static inline void usb_stop_pm(struct usb_device *udev)
#endif
+static void hub_free_dev(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ /* Root hubs aren't real devices, so don't free HCD resources */
+ if (hcd->driver->free_dev && udev->parent)
+ hcd->driver->free_dev(hcd, udev);
+}
+
/**
* usb_disconnect - disconnect a device (usbcore-internal)
* @pdev: pointer to device being disconnected
@@ -1578,6 +1587,8 @@ void usb_disconnect(struct usb_device **pdev)
usb_stop_pm(udev);
+ hub_free_dev(udev);
+
put_device(&udev->dev);
}
@@ -3130,6 +3141,7 @@ loop_disable:
loop:
usb_ep0_reinit(udev);
release_address(udev);
+ hub_free_dev(udev);
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 52e5e31..ab2d3e7 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -191,9 +191,6 @@ static void usb_release_dev(struct device *dev)
hcd = bus_to_hcd(udev->bus);
usb_destroy_configuration(udev);
- /* Root hubs aren't real devices, so don't free HCD resources */
- if (hcd->driver->free_dev && udev->parent)
- hcd->driver->free_dev(hcd, udev);
usb_put_hcd(hcd);
kfree(udev->product);
kfree(udev->manufacturer);
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 100bf3d..1f1d4fa 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -327,7 +327,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
}
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
- strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+ strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c);
i2c_put_adapter(i2c_adap);
@@ -411,7 +411,7 @@ out3:
out2:
clk_put(usb_clk);
out1:
- i2c_unregister_client(isp1301_i2c_client);
+ i2c_unregister_device(isp1301_i2c_client);
isp1301_i2c_client = NULL;
out_i2c_driver:
i2c_del_driver(&isp1301_driver);
@@ -430,7 +430,7 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
pnx4008_unset_usb_bits();
clk_disable(usb_clk);
clk_put(usb_clk);
- i2c_unregister_client(isp1301_i2c_client);
+ i2c_unregister_device(isp1301_i2c_client);
isp1301_i2c_client = NULL;
i2c_del_driver(&isp1301_driver);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 99cd00f..0919706 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -735,6 +735,7 @@ static void uhci_stop(struct usb_hcd *hcd)
uhci_hc_died(uhci);
uhci_scan_schedule(uhci);
spin_unlock_irq(&uhci->lock);
+ synchronize_irq(hcd->irq);
del_timer_sync(&uhci->fsbr_timer);
release_uhci(uhci);
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index ecc131c..78c4eda 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -101,12 +101,15 @@ static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
next = readl(base + ext_offset);
- if (ext_offset == XHCI_HCC_PARAMS_OFFSET)
+ if (ext_offset == XHCI_HCC_PARAMS_OFFSET) {
/* Find the first extended capability */
next = XHCI_HCC_EXT_CAPS(next);
- else
+ ext_offset = 0;
+ } else {
/* Find the next extended capability */
next = XHCI_EXT_CAPS_NEXT(next);
+ }
+
if (!next)
return 0;
/*
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 0025847..8b37a4b 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = {
{ USB_DEVICE(0x0711, 0x0902) },
{ USB_DEVICE(0x0711, 0x0903) },
{ USB_DEVICE(0x0711, 0x0918) },
+ { USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index bd254ec..7d920f2 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -91,11 +91,12 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
- { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 13a1b39..ce937e7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -44,12 +44,13 @@
#include <linux/serial.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
+#include "ftdi_sio_ids.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@...ah.com>, Bill Ryder <bryder@....com>, Kuba Ober <kuba@...eimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@...ah.com>, Bill Ryder <bryder@....com>, Kuba Ober <kuba@...eimbrium.org>, Andreas Mohr"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
@@ -144,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -551,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
- * Due to many user requests for multiple ELV devices we enable
- * them by default.
+ * ELV devices:
*/
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -570,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -595,6 +614,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
@@ -696,6 +716,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
@@ -717,6 +738,10 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 4586a24..b0e0d64 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -1,7 +1,10 @@
/*
- * Definitions for the FTDI USB Single Port Serial Converter -
+ * Driver definitions for the FTDI USB Single Port Serial Converter -
* known as FTDI_SIO (Serial Input/Output application of the chipset)
*
+ * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
+ *
+ *
* The example I have is known as the USC-1000 which is available from
* http://www.dse.co.nz - cat no XH4214 It looks similar to this:
* http://www.dansdata.com/usbser.htm but I can't be sure There are other
@@ -17,880 +20,7 @@
* Bill Ryder - bryder@....com formerly of Silicon Graphics, Inc.- wrote the
* FTDI_SIO implementation.
*
- * Philipp Gühring - pg@...ureware.at - added the Device ID of the USB relais
- * from Rudolf Gugler
- *
- */
-
-#define FTDI_VID 0x0403 /* Vendor Id */
-#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
-#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
-#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
-#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
-#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
-#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
-#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
-#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
-#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
-
-/* Larsen and Brusgaard AltiTrack/USBtrack */
-#define LARSENBRUSGAARD_VID 0x0FD8
-#define LB_ALTITRACK_PID 0x0001
-
-/* www.canusb.com Lawicel CANUSB device */
-#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
-
-/* AlphaMicro Components AMC-232USB01 device */
-#define FTDI_AMC232_PID 0xFF00 /* Product Id */
-
-/* www.candapter.com Ewert Energy Systems CANdapter device */
-#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
-
-/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
-/* the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
-#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
-#define FTDI_SCS_DEVICE_2_PID 0xD012
-#define FTDI_SCS_DEVICE_3_PID 0xD013
-#define FTDI_SCS_DEVICE_4_PID 0xD014
-#define FTDI_SCS_DEVICE_5_PID 0xD015
-#define FTDI_SCS_DEVICE_6_PID 0xD016
-#define FTDI_SCS_DEVICE_7_PID 0xD017
-
-/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
-#define FTDI_ACTZWAVE_PID 0xF2D0
-
-
-/* www.starting-point-systems.com µChameleon device */
-#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
-
-/* www.irtrans.de device */
-#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
-
-
-/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
-#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
-
-/* iPlus device */
-#define FTDI_IPLUS_PID 0xD070 /* Product Id */
-#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
-
-/* DMX4ALL DMX Interfaces */
-#define FTDI_DMX4ALL 0xC850
-
-/* OpenDCC (www.opendcc.de) product id */
-#define FTDI_OPENDCC_PID 0xBFD8
-#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
-#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
-#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
-
-/* Sprog II (Andrew Crosland's SprogII DCC interface) */
-#define FTDI_SPROG_II 0xF0C8
-
-/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
-/* they use the ftdi chipset for the USB interface and the vendor id is the same */
-#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
-#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
-#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
-#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
-#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
-#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
-#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
-#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
-
-/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
-/* broadband internet service. The following PID is exhibited by the usb device supplied */
-/* (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
-
-/*
- * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
- * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
- * (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_PCDJ_DAC2_PID 0xFA88
-
-/*
- * The following are the values for the Matrix Orbital LCD displays,
- * which are the FT232BM ( similar to the 8U232AM )
- */
-#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
-
-/* OOCDlink by Joern Kaipf <joernk@....de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
-#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
-
-/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
- */
-#define MTXORB_VID 0x1B3D
-#define MTXORB_FTDI_RANGE_0100_PID 0x0100
-#define MTXORB_FTDI_RANGE_0101_PID 0x0101
-#define MTXORB_FTDI_RANGE_0102_PID 0x0102
-#define MTXORB_FTDI_RANGE_0103_PID 0x0103
-#define MTXORB_FTDI_RANGE_0104_PID 0x0104
-#define MTXORB_FTDI_RANGE_0105_PID 0x0105
-#define MTXORB_FTDI_RANGE_0106_PID 0x0106
-#define MTXORB_FTDI_RANGE_0107_PID 0x0107
-#define MTXORB_FTDI_RANGE_0108_PID 0x0108
-#define MTXORB_FTDI_RANGE_0109_PID 0x0109
-#define MTXORB_FTDI_RANGE_010A_PID 0x010A
-#define MTXORB_FTDI_RANGE_010B_PID 0x010B
-#define MTXORB_FTDI_RANGE_010C_PID 0x010C
-#define MTXORB_FTDI_RANGE_010D_PID 0x010D
-#define MTXORB_FTDI_RANGE_010E_PID 0x010E
-#define MTXORB_FTDI_RANGE_010F_PID 0x010F
-#define MTXORB_FTDI_RANGE_0110_PID 0x0110
-#define MTXORB_FTDI_RANGE_0111_PID 0x0111
-#define MTXORB_FTDI_RANGE_0112_PID 0x0112
-#define MTXORB_FTDI_RANGE_0113_PID 0x0113
-#define MTXORB_FTDI_RANGE_0114_PID 0x0114
-#define MTXORB_FTDI_RANGE_0115_PID 0x0115
-#define MTXORB_FTDI_RANGE_0116_PID 0x0116
-#define MTXORB_FTDI_RANGE_0117_PID 0x0117
-#define MTXORB_FTDI_RANGE_0118_PID 0x0118
-#define MTXORB_FTDI_RANGE_0119_PID 0x0119
-#define MTXORB_FTDI_RANGE_011A_PID 0x011A
-#define MTXORB_FTDI_RANGE_011B_PID 0x011B
-#define MTXORB_FTDI_RANGE_011C_PID 0x011C
-#define MTXORB_FTDI_RANGE_011D_PID 0x011D
-#define MTXORB_FTDI_RANGE_011E_PID 0x011E
-#define MTXORB_FTDI_RANGE_011F_PID 0x011F
-#define MTXORB_FTDI_RANGE_0120_PID 0x0120
-#define MTXORB_FTDI_RANGE_0121_PID 0x0121
-#define MTXORB_FTDI_RANGE_0122_PID 0x0122
-#define MTXORB_FTDI_RANGE_0123_PID 0x0123
-#define MTXORB_FTDI_RANGE_0124_PID 0x0124
-#define MTXORB_FTDI_RANGE_0125_PID 0x0125
-#define MTXORB_FTDI_RANGE_0126_PID 0x0126
-#define MTXORB_FTDI_RANGE_0127_PID 0x0127
-#define MTXORB_FTDI_RANGE_0128_PID 0x0128
-#define MTXORB_FTDI_RANGE_0129_PID 0x0129
-#define MTXORB_FTDI_RANGE_012A_PID 0x012A
-#define MTXORB_FTDI_RANGE_012B_PID 0x012B
-#define MTXORB_FTDI_RANGE_012C_PID 0x012C
-#define MTXORB_FTDI_RANGE_012D_PID 0x012D
-#define MTXORB_FTDI_RANGE_012E_PID 0x012E
-#define MTXORB_FTDI_RANGE_012F_PID 0x012F
-#define MTXORB_FTDI_RANGE_0130_PID 0x0130
-#define MTXORB_FTDI_RANGE_0131_PID 0x0131
-#define MTXORB_FTDI_RANGE_0132_PID 0x0132
-#define MTXORB_FTDI_RANGE_0133_PID 0x0133
-#define MTXORB_FTDI_RANGE_0134_PID 0x0134
-#define MTXORB_FTDI_RANGE_0135_PID 0x0135
-#define MTXORB_FTDI_RANGE_0136_PID 0x0136
-#define MTXORB_FTDI_RANGE_0137_PID 0x0137
-#define MTXORB_FTDI_RANGE_0138_PID 0x0138
-#define MTXORB_FTDI_RANGE_0139_PID 0x0139
-#define MTXORB_FTDI_RANGE_013A_PID 0x013A
-#define MTXORB_FTDI_RANGE_013B_PID 0x013B
-#define MTXORB_FTDI_RANGE_013C_PID 0x013C
-#define MTXORB_FTDI_RANGE_013D_PID 0x013D
-#define MTXORB_FTDI_RANGE_013E_PID 0x013E
-#define MTXORB_FTDI_RANGE_013F_PID 0x013F
-#define MTXORB_FTDI_RANGE_0140_PID 0x0140
-#define MTXORB_FTDI_RANGE_0141_PID 0x0141
-#define MTXORB_FTDI_RANGE_0142_PID 0x0142
-#define MTXORB_FTDI_RANGE_0143_PID 0x0143
-#define MTXORB_FTDI_RANGE_0144_PID 0x0144
-#define MTXORB_FTDI_RANGE_0145_PID 0x0145
-#define MTXORB_FTDI_RANGE_0146_PID 0x0146
-#define MTXORB_FTDI_RANGE_0147_PID 0x0147
-#define MTXORB_FTDI_RANGE_0148_PID 0x0148
-#define MTXORB_FTDI_RANGE_0149_PID 0x0149
-#define MTXORB_FTDI_RANGE_014A_PID 0x014A
-#define MTXORB_FTDI_RANGE_014B_PID 0x014B
-#define MTXORB_FTDI_RANGE_014C_PID 0x014C
-#define MTXORB_FTDI_RANGE_014D_PID 0x014D
-#define MTXORB_FTDI_RANGE_014E_PID 0x014E
-#define MTXORB_FTDI_RANGE_014F_PID 0x014F
-#define MTXORB_FTDI_RANGE_0150_PID 0x0150
-#define MTXORB_FTDI_RANGE_0151_PID 0x0151
-#define MTXORB_FTDI_RANGE_0152_PID 0x0152
-#define MTXORB_FTDI_RANGE_0153_PID 0x0153
-#define MTXORB_FTDI_RANGE_0154_PID 0x0154
-#define MTXORB_FTDI_RANGE_0155_PID 0x0155
-#define MTXORB_FTDI_RANGE_0156_PID 0x0156
-#define MTXORB_FTDI_RANGE_0157_PID 0x0157
-#define MTXORB_FTDI_RANGE_0158_PID 0x0158
-#define MTXORB_FTDI_RANGE_0159_PID 0x0159
-#define MTXORB_FTDI_RANGE_015A_PID 0x015A
-#define MTXORB_FTDI_RANGE_015B_PID 0x015B
-#define MTXORB_FTDI_RANGE_015C_PID 0x015C
-#define MTXORB_FTDI_RANGE_015D_PID 0x015D
-#define MTXORB_FTDI_RANGE_015E_PID 0x015E
-#define MTXORB_FTDI_RANGE_015F_PID 0x015F
-#define MTXORB_FTDI_RANGE_0160_PID 0x0160
-#define MTXORB_FTDI_RANGE_0161_PID 0x0161
-#define MTXORB_FTDI_RANGE_0162_PID 0x0162
-#define MTXORB_FTDI_RANGE_0163_PID 0x0163
-#define MTXORB_FTDI_RANGE_0164_PID 0x0164
-#define MTXORB_FTDI_RANGE_0165_PID 0x0165
-#define MTXORB_FTDI_RANGE_0166_PID 0x0166
-#define MTXORB_FTDI_RANGE_0167_PID 0x0167
-#define MTXORB_FTDI_RANGE_0168_PID 0x0168
-#define MTXORB_FTDI_RANGE_0169_PID 0x0169
-#define MTXORB_FTDI_RANGE_016A_PID 0x016A
-#define MTXORB_FTDI_RANGE_016B_PID 0x016B
-#define MTXORB_FTDI_RANGE_016C_PID 0x016C
-#define MTXORB_FTDI_RANGE_016D_PID 0x016D
-#define MTXORB_FTDI_RANGE_016E_PID 0x016E
-#define MTXORB_FTDI_RANGE_016F_PID 0x016F
-#define MTXORB_FTDI_RANGE_0170_PID 0x0170
-#define MTXORB_FTDI_RANGE_0171_PID 0x0171
-#define MTXORB_FTDI_RANGE_0172_PID 0x0172
-#define MTXORB_FTDI_RANGE_0173_PID 0x0173
-#define MTXORB_FTDI_RANGE_0174_PID 0x0174
-#define MTXORB_FTDI_RANGE_0175_PID 0x0175
-#define MTXORB_FTDI_RANGE_0176_PID 0x0176
-#define MTXORB_FTDI_RANGE_0177_PID 0x0177
-#define MTXORB_FTDI_RANGE_0178_PID 0x0178
-#define MTXORB_FTDI_RANGE_0179_PID 0x0179
-#define MTXORB_FTDI_RANGE_017A_PID 0x017A
-#define MTXORB_FTDI_RANGE_017B_PID 0x017B
-#define MTXORB_FTDI_RANGE_017C_PID 0x017C
-#define MTXORB_FTDI_RANGE_017D_PID 0x017D
-#define MTXORB_FTDI_RANGE_017E_PID 0x017E
-#define MTXORB_FTDI_RANGE_017F_PID 0x017F
-#define MTXORB_FTDI_RANGE_0180_PID 0x0180
-#define MTXORB_FTDI_RANGE_0181_PID 0x0181
-#define MTXORB_FTDI_RANGE_0182_PID 0x0182
-#define MTXORB_FTDI_RANGE_0183_PID 0x0183
-#define MTXORB_FTDI_RANGE_0184_PID 0x0184
-#define MTXORB_FTDI_RANGE_0185_PID 0x0185
-#define MTXORB_FTDI_RANGE_0186_PID 0x0186
-#define MTXORB_FTDI_RANGE_0187_PID 0x0187
-#define MTXORB_FTDI_RANGE_0188_PID 0x0188
-#define MTXORB_FTDI_RANGE_0189_PID 0x0189
-#define MTXORB_FTDI_RANGE_018A_PID 0x018A
-#define MTXORB_FTDI_RANGE_018B_PID 0x018B
-#define MTXORB_FTDI_RANGE_018C_PID 0x018C
-#define MTXORB_FTDI_RANGE_018D_PID 0x018D
-#define MTXORB_FTDI_RANGE_018E_PID 0x018E
-#define MTXORB_FTDI_RANGE_018F_PID 0x018F
-#define MTXORB_FTDI_RANGE_0190_PID 0x0190
-#define MTXORB_FTDI_RANGE_0191_PID 0x0191
-#define MTXORB_FTDI_RANGE_0192_PID 0x0192
-#define MTXORB_FTDI_RANGE_0193_PID 0x0193
-#define MTXORB_FTDI_RANGE_0194_PID 0x0194
-#define MTXORB_FTDI_RANGE_0195_PID 0x0195
-#define MTXORB_FTDI_RANGE_0196_PID 0x0196
-#define MTXORB_FTDI_RANGE_0197_PID 0x0197
-#define MTXORB_FTDI_RANGE_0198_PID 0x0198
-#define MTXORB_FTDI_RANGE_0199_PID 0x0199
-#define MTXORB_FTDI_RANGE_019A_PID 0x019A
-#define MTXORB_FTDI_RANGE_019B_PID 0x019B
-#define MTXORB_FTDI_RANGE_019C_PID 0x019C
-#define MTXORB_FTDI_RANGE_019D_PID 0x019D
-#define MTXORB_FTDI_RANGE_019E_PID 0x019E
-#define MTXORB_FTDI_RANGE_019F_PID 0x019F
-#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
-#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
-#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
-#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
-#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
-#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
-#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
-#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
-#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
-#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
-#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
-#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
-#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
-#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
-#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
-#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
-#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
-#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
-#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
-#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
-#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
-#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
-#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
-#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
-#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
-#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
-#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
-#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
-#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
-#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
-#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
-#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
-#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
-#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
-#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
-#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
-#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
-#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
-#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
-#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
-#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
-#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
-#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
-#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
-#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
-#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
-#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
-#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
-#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
-#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
-#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
-#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
-#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
-#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
-#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
-#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
-#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
-#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
-#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
-#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
-#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
-#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
-#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
-#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
-#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
-#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
-#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
-#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
-#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
-#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
-#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
-#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
-#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
-#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
-#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
-#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
-#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
-#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
-#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
-#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
-#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
-#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
-#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
-#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
-#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
-#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
-#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
-#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
-#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
-#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
-#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
-#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
-#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
-#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
-#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
-#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
-
-
-
-/* Interbiometrics USB I/O Board */
-/* Developed for Interbiometrics by Rudolf Gugler */
-#define INTERBIOMETRICS_VID 0x1209
-#define INTERBIOMETRICS_IOBOARD_PID 0x1002
-#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
-
-/*
- * The following are the values for the Perle Systems
- * UltraPort USB serial converters
- */
-#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
-
-/*
- * The following are the values for the Sealevel SeaLINK+ adapters.
- * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
- * removed some PIDs that don't seem to match any existing products.)
- */
-#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
-#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
-#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
-#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
-#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
-#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
-#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
-#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
-#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
-#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
-#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
-#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
-#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
-#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
-#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
-#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
-#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
-#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
-#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
-#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
-#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
-#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
-#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
-#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
-#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
-#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
-#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
-#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
-#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
-#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
-#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
-#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
-#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
-#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
-#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
-#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
-#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
-#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
-#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
-#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
-#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
-
-/*
- * The following are the values for two KOBIL chipcard terminals.
- */
-#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
-#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
-#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
-
-/*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID 0x0C26
-#define ICOM_ID1_PID 0x0004
-
-/*
- * ASK.fr devices
- */
-#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
-
-/*
- * FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
- */
-#define ELEKTOR_VID 0x0C7D
-#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
-
-/*
- * DSS-20 Sync Station for Sony Ericsson P800
- */
-#define FTDI_DSS20_PID 0xFC82
-
-/*
- * Home Electronics (www.home-electro.com) USB gadgets
- */
-#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
-
-/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
-#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
-
-/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
-
-#define FTDI_TNC_X_PID 0xEBE0
-
-/*
- * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
- *
- * The previously included PID for the UO 100 module was incorrect.
- * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
- *
- * Armin Laeuger originally sent the PID for the UM 100 module.
- */
-#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
-#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
-#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
-#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
-#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
-/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
- * MS Windows, rather than the FTDI Virtual Com Port drivers.
- * Maybe these will be easier to use with the libftdi/libusb user-space
- * drivers, or possibly the Comedi drivers in some cases. */
-#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
-#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
-#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
-#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
-#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
-#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
-#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
-#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
-#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
-#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
-#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
-#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
-#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
-#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
-#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
-#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
-#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
-#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
-#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
-#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
-#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
-
-/*
- * Definitions for ID TECH (www.idt-net.com) devices
- */
-#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
-#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
-
-/*
- * Definitions for Omnidirectional Control Technology, Inc. devices
- */
-#define OCT_VID 0x0B39 /* OCT vendor ID */
-/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
-/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
-/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
-#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
-
-/* an infrared receiver for user access control with IR tags */
-#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
-
-/*
- * Definitions for Artemis astronomical USB based cameras
- * Check it at http://www.artemisccd.co.uk/
- */
-#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
-
-/*
- * Definitions for ATIK Instruments astronomical USB based cameras
- * Check it at http://www.atik-instruments.com/
- */
-#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
-#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
-#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
-#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
-#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
-
-/*
- * Protego product ids
- */
-#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
-#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
-#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
-#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
-
-/*
- * Gude Analog- und Digitalsysteme GmbH
- */
-#define FTDI_GUDEADS_E808_PID 0xE808
-#define FTDI_GUDEADS_E809_PID 0xE809
-#define FTDI_GUDEADS_E80A_PID 0xE80A
-#define FTDI_GUDEADS_E80B_PID 0xE80B
-#define FTDI_GUDEADS_E80C_PID 0xE80C
-#define FTDI_GUDEADS_E80D_PID 0xE80D
-#define FTDI_GUDEADS_E80E_PID 0xE80E
-#define FTDI_GUDEADS_E80F_PID 0xE80F
-#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
-#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
-#define FTDI_GUDEADS_E88A_PID 0xE88A
-#define FTDI_GUDEADS_E88B_PID 0xE88B
-#define FTDI_GUDEADS_E88C_PID 0xE88C
-#define FTDI_GUDEADS_E88D_PID 0xE88D
-#define FTDI_GUDEADS_E88E_PID 0xE88E
-#define FTDI_GUDEADS_E88F_PID 0xE88F
-
-/*
- * Linx Technologies product ids
- */
-#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
-#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
-#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
-
-/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
-/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID 0xF9D0
-#define FTDI_CCSICDU40_1_PID 0xF9D1
-#define FTDI_CCSMACHX_2_PID 0xF9D2
-#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
-#define FTDI_CCSICDU64_4_PID 0xF9D4
-#define FTDI_CCSPRIME8_5_PID 0xF9D5
-
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
-#define INSIDE_ACCESSO 0xFAD0
-
-/*
- * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
- */
-#define INTREPID_VID 0x093C
-#define INTREPID_VALUECAN_PID 0x0601
-#define INTREPID_NEOVI_PID 0x0701
-
-/*
- * Falcom Wireless Communications GmbH
- */
-#define FALCOM_VID 0x0F94 /* Vendor Id */
-#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
-#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
-
-/*
- * SUUNTO product ids
- */
-#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
-
-/*
- * Oceanic product ids
- */
-#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
-
-/*
- * TTi (Thurlby Thandar Instruments)
- */
-#define TTI_VID 0x103E /* Vendor Id */
-#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
-
-/*
- * Definitions for B&B Electronics products.
- */
-#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
-#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
-#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
-#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
-#define BANDB_USOPTL4_PID 0xAC11
-#define BANDB_USPTL4_PID 0xAC12
-#define BANDB_USO9ML2DR_2_PID 0xAC16
-#define BANDB_USO9ML2DR_PID 0xAC17
-#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
-#define BANDB_USOPTL4DR_PID 0xAC19
-#define BANDB_485USB9F_2W_PID 0xAC25
-#define BANDB_485USB9F_4W_PID 0xAC26
-#define BANDB_232USB9M_PID 0xAC27
-#define BANDB_485USBTB_2W_PID 0xAC33
-#define BANDB_485USBTB_4W_PID 0xAC34
-#define BANDB_TTL5USB9M_PID 0xAC49
-#define BANDB_TTL3USB9M_PID 0xAC50
-#define BANDB_ZZ_PROG1_USB_PID 0xBA02
-
-/*
- * RM Michaelides CANview USB (http://www.rmcan.com)
- * CAN fieldbus interface adapter, added by port GmbH www.port.de)
- * Ian Abbott changed the macro names for consistency.
- */
-#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
-
-/*
- * EVER Eco Pro UPS (http://www.ever.com.pl/)
- */
-
-#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
-
-/*
- * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
- * and I'm not entirely sure which are used by which.
- */
-#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
-#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
-
-/*
- * Mobility Electronics products.
- */
-#define MOBILITY_VID 0x1342
-#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
-
-/*
- * microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@...n.com>
- * and Mike Studer (K6EEP) <k6eep@...software.org>.
- * Ian Abbott <abbotti@....co.uk> added a few more from the driver INF file.
- */
-#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
-
-/*
- * Active Robots product ids.
- */
-#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
-
-/*
- * Xsens Technologies BV products (http://www.xsens.com).
- */
-#define XSENS_CONVERTER_0_PID 0xD388
-#define XSENS_CONVERTER_1_PID 0xD389
-#define XSENS_CONVERTER_2_PID 0xD38A
-#define XSENS_CONVERTER_3_PID 0xD38B
-#define XSENS_CONVERTER_4_PID 0xD38C
-#define XSENS_CONVERTER_5_PID 0xD38D
-#define XSENS_CONVERTER_6_PID 0xD38E
-#define XSENS_CONVERTER_7_PID 0xD38F
-
-/*
- * Teratronik product ids.
- * Submitted by O. Wölfelschneider.
- */
-#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
-#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
-
-/*
- * Evolution Robotics products (http://www.evolution.com/).
- * Submitted by Shawn M. Lavelle.
- */
-#define EVOLUTION_VID 0xDEEE /* Vendor ID */
-#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
-#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
-#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
-#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
-
-/* Pyramid Computer GmbH */
-#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
-
-/*
- * NDI (www.ndigital.com) product ids
- */
-#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
-#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
-#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
-#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
-#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
-
-/*
- * Posiflex inc retail equipment (http://www.posiflex.com.tw)
- */
-#define POSIFLEX_VID 0x0d3a /* Vendor ID */
-#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
-
-/*
- * Westrex International devices submitted by Cory Lee
- */
-#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
-#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
-
-/*
- * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
- */
-#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
-
-/*
- * Eclo (http://www.eclo.pt/) product IDs.
- * PID 0xEA90 submitted by Martin Grill.
- */
-#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
-
-/*
- * Papouch products (http://www.papouch.com/)
- * Submitted by Folkert van Heusden
- */
-
-#define PAPOUCH_VID 0x5050 /* Vendor ID */
-#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
-
-/*
- * ACG Identification Technologies GmbH products (http://www.acg.de/).
- * Submitted by anton -at- goto10 -dot- org.
*/
-#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
-
-/*
- * Yost Engineering, Inc. products (www.yostengineering.com).
- * PID 0xE050 submitted by Aaron Prose.
- */
-#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
-
-/*
- * ThorLabs USB motor drivers
- */
-#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
-
-/*
- * Testo products (http://www.testo.com/)
- * Submitted by Colin Leroy
- */
-#define TESTO_VID 0x128D
-#define TESTO_USB_INTERFACE_PID 0x0001
-
-/*
- * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@...tux.com.
- */
-#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
-
-/*
- * Tactrix OpenPort (ECU) devices.
- * OpenPort 1.3M submitted by Donour Sizemore.
- * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
- */
-#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
-#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
-#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
-
-/*
- * Telldus Technologies
- */
-#define TELLDUS_VID 0x1781 /* Vendor ID */
-#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
-
-/*
- * IBS elektronik product ids
- * Submitted by Thomas Schleusener
- */
-#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
-#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
-#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
-#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
-#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
-#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
-#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
-#define FTDI_IBS_PROD_PID 0xff3f /* future device */
-
-/*
- * MaxStream devices www.maxstream.net
- */
-#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
-
-/* Olimex */
-#define OLIMEX_VID 0x15BA
-#define OLIMEX_ARM_USB_OCD_PID 0x0003
-
-/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
-/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
-#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
-#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
-
-/* www.elsterelectricity.com Elster Unicom III Optical Probe */
-#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
-
-/*
- * The Mobility Lab (TML)
- * Submitted by Pierre Castella
- */
-#define TML_VID 0x1B91 /* Vendor ID */
-#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-
-/* Propox devices */
-#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
-
-/* Rig Expert Ukraine devices */
-#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
-
-/* Domintell products http://www.domintell.com */
-#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
-#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
-
-/* Alti-2 products http://www.alti-2.com */
-#define ALTI2_VID 0x1BC9
-#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
@@ -910,86 +40,6 @@
#define INTERFACE_C 3
#define INTERFACE_D 4
-/*
- * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
- * Submitted by Harald Welte <laforge@...nmoko.org>
- */
-#define FIC_VID 0x1457
-#define FIC_NEO1973_DEBUG_PID 0x5118
-
-/*
- * RATOC REX-USB60F
- */
-#define RATOC_VENDOR_ID 0x0584
-#define RATOC_PRODUCT_ID_USB60F 0xb020
-
-/*
- * DIEBOLD BCS SE923
- */
-#define DIEBOLD_BCS_SE923_PID 0xfb99
-
-/*
- * Atmel STK541
- */
-#define ATMEL_VID 0x03eb /* Vendor ID */
-#define STK541_PID 0x2109 /* Zigbee Controller */
-
-/*
- * Dresden Elektronic Sensor Terminal Board
- */
-#define DE_VID 0x1cf1 /* Vendor ID */
-#define STB_PID 0x0001 /* Sensor Terminal Board */
-#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
-
-/*
- * Blackfin gnICE JTAG
- * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
- */
-#define ADI_VID 0x0456
-#define ADI_GNICE_PID 0xF000
-#define ADI_GNICEPLUS_PID 0xF001
-
-/*
- * JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
- */
-#define JETI_VID 0x0c6c
-#define JETI_SPC1201_PID 0x04b2
-
-/*
- * Marvell SheevaPlug
- */
-#define MARVELL_VID 0x9e88
-#define MARVELL_SHEEVAPLUG_PID 0x9e8f
-
-#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
-
-/*
- * GN Otometrics (http://www.otometrics.com)
- * Submitted by Ville Sundberg.
- */
-#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
-#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
-
-/*
- * Bayer Ascensia Contour blood glucose meter USB-converter cable.
- * http://winglucofacts.com/cables/
- */
-#define BAYER_VID 0x1A79
-#define BAYER_CONTOUR_CABLE_PID 0x6001
-
-/*
- * Marvell OpenRD Base, Client
- * http://www.open-rd.org
- * OpenRD Base, Client use VID 0x0403
- */
-#define MARVELL_OPENRD_PID 0x9e90
-
-/*
- * Hameg HO820 and HO870 interface (using VID 0x0403)
- */
-#define HAMEG_HO820_PID 0xed74
-#define HAMEG_HO870_PID 0xed71
/*
* BmRequestType: 1100 0000b
@@ -1504,4 +554,3 @@ typedef enum {
* B2..7 Length of message - (not including Byte 0)
*
*/
-
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
new file mode 100644
index 0000000..d10b5a8
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -0,0 +1,1019 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@...ureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID 0x0403 /* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+
+/* OOCDlink by Joern Kaipf <joernk@....de>
+ * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
+
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID 0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@...tux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID 0xD388
+#define XSENS_CONVERTER_1_PID 0xD389
+#define XSENS_CONVERTER_2_PID 0xD38A
+#define XSENS_CONVERTER_3_PID 0xD38B
+#define XSENS_CONVERTER_4_PID 0xD38C
+#define XSENS_CONVERTER_5_PID 0xD38D
+#define XSENS_CONVERTER_6_PID 0xD38E
+#define XSENS_CONVERTER_7_PID 0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
+#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
+#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
+#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
+#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
+#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID 0xE808
+#define FTDI_GUDEADS_E809_PID 0xE809
+#define FTDI_GUDEADS_E80A_PID 0xE80A
+#define FTDI_GUDEADS_E80B_PID 0xE80B
+#define FTDI_GUDEADS_E80C_PID 0xE80C
+#define FTDI_GUDEADS_E80D_PID 0xE80D
+#define FTDI_GUDEADS_E80E_PID 0xE80E
+#define FTDI_GUDEADS_E80F_PID 0xE80F
+#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID 0xE88A
+#define FTDI_GUDEADS_E88B_PID 0xE88B
+#define FTDI_GUDEADS_E88C_PID 0xE88C
+#define FTDI_GUDEADS_E88D_PID 0xE88D
+#define FTDI_GUDEADS_E88E_PID 0xE88E
+#define FTDI_GUDEADS_E88F_PID 0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID 0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO870_PID 0xed71
+
+/*
+ * MaxStream devices www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@...n.com>
+ * and Mike Studer (K6EEP) <k6eep@...software.org>.
+ * Ian Abbott <abbotti@....co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
+#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
+
+/* Domintell products http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
+#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+ (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID 0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
+#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
+#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidefr.com) */
+#define INSIDE_ACCESSO 0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
+#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
+#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
+
+/*
+ * DSS-20 Sync Station for Sony Ericsson P800
+ */
+#define FTDI_DSS20_PID 0xFC82
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID 0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service. The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID 0xff3f /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID 0x03eb /* Vendor ID */
+#define STK541_PID 0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 0x0456
+#define ADI_GNICE_PID 0xF000
+#define ADI_GNICEPLUS_PID 0xF001
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
+/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID 0x06CE /* Vendor ID */
+#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID 0xAC11
+#define BANDB_USPTL4_PID 0xAC12
+#define BANDB_USO9ML2DR_2_PID 0xAC16
+#define BANDB_USO9ML2DR_PID 0xAC17
+#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID 0xAC19
+#define BANDB_485USB9F_2W_PID 0xAC25
+#define BANDB_485USB9F_4W_PID 0xAC26
+#define BANDB_232USB9M_PID 0xAC27
+#define BANDB_485USBTB_2W_PID 0xAC33
+#define BANDB_485USBTB_4W_PID 0xAC34
+#define BANDB_TTL5USB9M_PID 0xAC49
+#define BANDB_TTL3USB9M_PID 0xAC50
+#define BANDB_ZZ_PROG1_USB_PID 0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID 0x093C
+#define INTREPID_VALUECAN_PID 0x0601
+#define INTREPID_NEOVI_PID 0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID 0x0B39 /* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
+
+/*
+ * Icom ID-1 digital transceiver
+ */
+
+#define ICOM_ID1_VID 0x0C26
+#define ICOM_ID1_PID 0x0004
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ */
+#define ELEKTOR_VID 0x0C7D
+#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID 0x0d3a /* Vendor ID */
+#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
+#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID 0x0F94 /* Vendor Id */
+#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID 0x0FD8
+#define LB_ALTITRACK_PID 0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID 0x103E /* Vendor Id */
+#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID 0x1209
+#define INTERBIOMETRICS_IOBOARD_PID 0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID 0x128D
+#define TESTO_USB_INTERFACE_PID 0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID 0x1342
+#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@...nmoko.org>
+ */
+#define FIC_VID 0x1457
+#define FIC_NEO1973_DEBUG_PID 0x5118
+
+/* Olimex */
+#define OLIMEX_VID 0x15BA
+#define OLIMEX_ARM_USB_OCD_PID 0x0003
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID 0x1781 /* Vendor ID */
+#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID 0x1B91 /* Vendor ID */
+#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
+
+/* Alti-2 products http://www.alti-2.com */
+#define ALTI2_VID 0x1BC9
+#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
+
+/*
+ * Dresden Elektronic Sensor Terminal Board
+ */
+#define DE_VID 0x1cf1 /* Vendor ID */
+#define STB_PID 0x0001 /* Sensor Terminal Board */
+#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID 0x5050 /* Vendor ID */
+#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID 0xDEEE /* Vendor ID */
+#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID 0x9378
+#define MJSG_SR_RADIO_PID 0x9379
+#define MJSG_XM_RADIO_PID 0x937A
+#define MJSG_HD_RADIO_PID 0x937C
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 5019325..3689077 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -567,14 +567,17 @@ static void sierra_indat_callback(struct urb *urb)
} else {
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
-
- tty_buffer_request_room(tty, urb->actual_length);
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
- usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
+ if (tty) {
+ tty_buffer_request_room(tty,
+ urb->actual_length);
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+ usb_serial_debug_data(debug, &port->dev,
+ __func__, urb->actual_length, data);
+ }
} else {
dev_dbg(&port->dev, "%s: empty read urb"
" received\n", __func__);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c932f90..4d0a208 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1147,8 +1147,8 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
0 ),
/* Reported by Jan Dumon <j.dumon@...ion.com>
- * This device (wrongly) has a vendor-specific device descriptor.
- * The entry is needed so usb-storage can bind to it's mass-storage
+ * These devices (wrongly) have a vendor-specific device descriptor.
+ * These entries are needed so usb-storage can bind to their mass-storage
* interface as an interface driver */
UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
"Option",
@@ -1156,6 +1156,90 @@ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
+UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
+ "Option",
+ "GI 0451 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
+ "Option",
+ "GI 0451 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
+ "Option",
+ "GI 0452 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
+ "Option",
+ "GI 0461 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
+ "Option",
+ "GI 0461 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
+ "Option",
+ "GI 070x SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
+ "Option",
+ "GI 1505 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
+ "Option",
+ "GI 1509 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
+ "Option",
+ "GI 1515 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
+ "Option",
+ "GI 1215 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
+ "Option",
+ "GI 1505 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
/* Reported by Ben Efros <ben@...doctor.com> */
UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
"Seagate",
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 4d8c54c..b043ac8 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -282,8 +282,17 @@ static int offb_set_par(struct fb_info *info)
return 0;
}
+static void offb_destroy(struct fb_info *info)
+{
+ if (info->screen_base)
+ iounmap(info->screen_base);
+ release_mem_region(info->aperture_base, info->aperture_size);
+ framebuffer_release(info);
+}
+
static struct fb_ops offb_ops = {
.owner = THIS_MODULE,
+ .fb_destroy = offb_destroy,
.fb_setcolreg = offb_setcolreg,
.fb_set_par = offb_set_par,
.fb_blank = offb_blank,
@@ -482,10 +491,14 @@ static void __init offb_init_fb(const char *name, const char *full_name,
var->sync = 0;
var->vmode = FB_VMODE_NONINTERLACED;
+ /* set offb aperture size for generic probing */
+ info->aperture_base = address;
+ info->aperture_size = fix->smem_len;
+
info->fbops = &offb_ops;
info->screen_base = ioremap(address, fix->smem_len);
info->pseudo_palette = (void *) (info + 1);
- info->flags = FBINFO_DEFAULT | foreign_endian;
+ info->flags = FBINFO_DEFAULT | FBINFO_MISC_FIRMWARE | foreign_endian;
fb_alloc_cmap(&info->cmap, 256, 0);
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
index 18b9507..4cd5049 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -400,6 +400,7 @@ static void __devexit e3d_pci_unregister(struct pci_dev *pdev)
static struct pci_device_id e3d_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), },
+ { PCI_DEVICE(0x1091, 0x7a0), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), },
{ .vendor = PCI_VENDOR_ID_3DLABS,
.device = PCI_ANY_ID,
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index c7b3f9d..2159e66 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -1,9 +1,8 @@
/*
* Blackfin On-Chip Watchdog Driver
- * Supports BF53[123]/BF53[467]/BF54[2489]/BF561
*
* Originally based on softdog.c
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
* Copyright 2006-2007 Michele d'Amico
* Copyright 1996 Alan Cox <alan@...rguk.ukuu.org.uk>
*
@@ -137,13 +136,15 @@ static int bfin_wdt_running(void)
*/
static int bfin_wdt_set_timeout(unsigned long t)
{
- u32 cnt;
+ u32 cnt, max_t, sclk;
unsigned long flags;
- stampit();
+ sclk = get_sclk();
+ max_t = -1 / sclk;
+ cnt = t * sclk;
+ stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt);
- cnt = t * get_sclk();
- if (cnt < get_sclk()) {
+ if (t > max_t) {
printk(KERN_WARNING PFX "timeout value is too large\n");
return -EINVAL;
}
diff --git a/fs/exec.c b/fs/exec.c
index da36c20..9b88366 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -638,7 +638,6 @@ int setup_arg_pages(struct linux_binprm *bprm,
* will align it up.
*/
rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK;
- rlim_stack = min(rlim_stack, stack_size);
#ifdef CONFIG_STACK_GROWSUP
if (stack_size + stack_expand > rlim_stack)
stack_base = vma->vm_start + rlim_stack;
diff --git a/fs/file_table.c b/fs/file_table.c
index 8eb4404..666c7ce 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -420,7 +420,9 @@ retry:
continue;
if (!(f->f_mode & FMODE_WRITE))
continue;
+ spin_lock(&f->f_lock);
f->f_mode &= ~FMODE_WRITE;
+ spin_unlock(&f->f_lock);
if (file_check_writeable(f) != 0)
continue;
file_release_write(f);
diff --git a/fs/namei.c b/fs/namei.c
index a2b3c28..b0afbd4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -829,6 +829,17 @@ fail:
}
/*
+ * This is a temporary kludge to deal with "automount" symlinks; proper
+ * solution is to trigger them on follow_mount(), so that do_lookup()
+ * would DTRT. To be killed before 2.6.34-final.
+ */
+static inline int follow_on_final(struct inode *inode, unsigned lookup_flags)
+{
+ return inode && unlikely(inode->i_op->follow_link) &&
+ ((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode));
+}
+
+/*
* Name resolution.
* This is the basic name resolution function, turning a pathname into
* the final dentry. We expect 'base' to be positive and a directory.
@@ -964,8 +975,7 @@ last_component:
if (err)
break;
inode = next.dentry->d_inode;
- if ((lookup_flags & LOOKUP_FOLLOW)
- && inode && inode->i_op->follow_link) {
+ if (follow_on_final(inode, lookup_flags)) {
err = do_follow_link(&next, nd);
if (err)
goto return_err;
diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c
index f4d54ba..c1fd68b 100644
--- a/fs/nfs/dns_resolve.c
+++ b/fs/nfs/dns_resolve.c
@@ -36,6 +36,19 @@ struct nfs_dns_ent {
};
+static void nfs_dns_ent_update(struct cache_head *cnew,
+ struct cache_head *ckey)
+{
+ struct nfs_dns_ent *new;
+ struct nfs_dns_ent *key;
+
+ new = container_of(cnew, struct nfs_dns_ent, h);
+ key = container_of(ckey, struct nfs_dns_ent, h);
+
+ memcpy(&new->addr, &key->addr, key->addrlen);
+ new->addrlen = key->addrlen;
+}
+
static void nfs_dns_ent_init(struct cache_head *cnew,
struct cache_head *ckey)
{
@@ -49,8 +62,7 @@ static void nfs_dns_ent_init(struct cache_head *cnew,
new->hostname = kstrndup(key->hostname, key->namelen, GFP_KERNEL);
if (new->hostname) {
new->namelen = key->namelen;
- memcpy(&new->addr, &key->addr, key->addrlen);
- new->addrlen = key->addrlen;
+ nfs_dns_ent_update(cnew, ckey);
} else {
new->namelen = 0;
new->addrlen = 0;
@@ -234,7 +246,7 @@ static struct cache_detail nfs_dns_resolve = {
.cache_show = nfs_dns_show,
.match = nfs_dns_match,
.init = nfs_dns_ent_init,
- .update = nfs_dns_ent_init,
+ .update = nfs_dns_ent_update,
.alloc = nfs_dns_ent_alloc,
};
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 2153f9b..6ad6282 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -2002,7 +2002,9 @@ nfs4_file_downgrade(struct file *filp, unsigned int share_access)
{
if (share_access & NFS4_SHARE_ACCESS_WRITE) {
drop_file_write_access(filp);
+ spin_lock(&filp->f_lock);
filp->f_mode = (filp->f_mode | FMODE_READ) & ~FMODE_WRITE;
+ spin_unlock(&filp->f_lock);
}
}
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index deb2b13..5fc918c 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -591,8 +591,9 @@ static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock,
goto bail;
}
- /* We should already CoW the refcounted extent. */
- BUG_ON(ext_flags & OCFS2_EXT_REFCOUNTED);
+ /* We should already CoW the refcounted extent in case of create. */
+ BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED));
+
/*
* get_more_blocks() expects us to describe a hole by clearing
* the mapped bit on bh_result().
diff --git a/fs/proc/base.c b/fs/proc/base.c
index af643b5..6d71c67 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2304,16 +2304,30 @@ static void *proc_self_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct pid_namespace *ns = dentry->d_sb->s_fs_info;
pid_t tgid = task_tgid_nr_ns(current, ns);
- char tmp[PROC_NUMBUF];
- if (!tgid)
- return ERR_PTR(-ENOENT);
- sprintf(tmp, "%d", task_tgid_nr_ns(current, ns));
- return ERR_PTR(vfs_follow_link(nd,tmp));
+ char *name = ERR_PTR(-ENOENT);
+ if (tgid) {
+ name = __getname();
+ if (!name)
+ name = ERR_PTR(-ENOMEM);
+ else
+ sprintf(name, "%d", tgid);
+ }
+ nd_set_link(nd, name);
+ return NULL;
+}
+
+static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd,
+ void *cookie)
+{
+ char *s = nd_get_link(nd);
+ if (!IS_ERR(s))
+ __putname(s);
}
static const struct inode_operations proc_self_inode_operations = {
.readlink = proc_self_readlink,
.follow_link = proc_self_follow_link,
+ .put_link = proc_self_put_link,
};
/*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 98ea200..692a3ee 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -87,6 +87,9 @@ struct inodes_stat_t {
*/
#define FMODE_NOCMTIME ((__force fmode_t)2048)
+/* Expect random access pattern */
+#define FMODE_RANDOM ((__force fmode_t)4096)
+
/*
* The below are the various read and write types that we support. Some of
* them include behavioral modifiers that send information down to the
diff --git a/include/linux/irq.h b/include/linux/irq.h
index ae9653d..9e5f45a 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -400,7 +400,9 @@ static inline int irq_has_action(unsigned int irq)
/* Dynamic irq helper functions */
extern void dynamic_irq_init(unsigned int irq);
+void dynamic_irq_init_keep_chip_data(unsigned int irq);
extern void dynamic_irq_cleanup(unsigned int irq);
+void dynamic_irq_cleanup_keep_chip_data(unsigned int irq);
/* Set/get chip/data for an IRQ: */
extern int set_irq_chip(unsigned int irq, struct irq_chip *chip);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e48311e..70abfd3 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -864,7 +864,10 @@ static inline int sd_balance_for_mc_power(void)
if (sched_smt_power_savings)
return SD_POWERSAVINGS_BALANCE;
- return SD_PREFER_SIBLING;
+ if (!sched_mc_power_savings)
+ return SD_PREFER_SIBLING;
+
+ return 0;
}
static inline int sd_balance_for_package_power(void)
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index c166019..e570d19 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -18,11 +18,7 @@
#include "internals.h"
-/**
- * dynamic_irq_init - initialize a dynamically allocated irq
- * @irq: irq number to initialize
- */
-void dynamic_irq_init(unsigned int irq)
+static void dynamic_irq_init_x(unsigned int irq, bool keep_chip_data)
{
struct irq_desc *desc;
unsigned long flags;
@@ -41,7 +37,8 @@ void dynamic_irq_init(unsigned int irq)
desc->depth = 1;
desc->msi_desc = NULL;
desc->handler_data = NULL;
- desc->chip_data = NULL;
+ if (!keep_chip_data)
+ desc->chip_data = NULL;
desc->action = NULL;
desc->irq_count = 0;
desc->irqs_unhandled = 0;
@@ -55,10 +52,26 @@ void dynamic_irq_init(unsigned int irq)
}
/**
- * dynamic_irq_cleanup - cleanup a dynamically allocated irq
+ * dynamic_irq_init - initialize a dynamically allocated irq
* @irq: irq number to initialize
*/
-void dynamic_irq_cleanup(unsigned int irq)
+void dynamic_irq_init(unsigned int irq)
+{
+ dynamic_irq_init_x(irq, false);
+}
+
+/**
+ * dynamic_irq_init_keep_chip_data - initialize a dynamically allocated irq
+ * @irq: irq number to initialize
+ *
+ * does not set irq_to_desc(irq)->chip_data to NULL
+ */
+void dynamic_irq_init_keep_chip_data(unsigned int irq)
+{
+ dynamic_irq_init_x(irq, true);
+}
+
+static void dynamic_irq_cleanup_x(unsigned int irq, bool keep_chip_data)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
@@ -77,7 +90,8 @@ void dynamic_irq_cleanup(unsigned int irq)
}
desc->msi_desc = NULL;
desc->handler_data = NULL;
- desc->chip_data = NULL;
+ if (!keep_chip_data)
+ desc->chip_data = NULL;
desc->handle_irq = handle_bad_irq;
desc->chip = &no_irq_chip;
desc->name = NULL;
@@ -85,6 +99,26 @@ void dynamic_irq_cleanup(unsigned int irq)
spin_unlock_irqrestore(&desc->lock, flags);
}
+/**
+ * dynamic_irq_cleanup - cleanup a dynamically allocated irq
+ * @irq: irq number to initialize
+ */
+void dynamic_irq_cleanup(unsigned int irq)
+{
+ dynamic_irq_cleanup_x(irq, false);
+}
+
+/**
+ * dynamic_irq_cleanup_keep_chip_data - cleanup a dynamically allocated irq
+ * @irq: irq number to initialize
+ *
+ * does not set irq_to_desc(irq)->chip_data to NULL
+ */
+void dynamic_irq_cleanup_keep_chip_data(unsigned int irq)
+{
+ dynamic_irq_cleanup_x(irq, true);
+}
+
/**
* set_irq_chip - set the irq chip for an irq
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 36cb168..fc9ed15 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1181,7 +1181,7 @@ static void free_unnecessary_pages(void)
memory_bm_position_reset(©_bm);
- while (to_free_normal > 0 && to_free_highmem > 0) {
+ while (to_free_normal > 0 || to_free_highmem > 0) {
unsigned long pfn = memory_bm_next_pfn(©_bm);
struct page *page = pfn_to_page(pfn);
diff --git a/kernel/sched.c b/kernel/sched.c
index 60d74cc..380e1fa 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4098,12 +4098,23 @@ find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
continue;
rq = cpu_rq(i);
- wl = weighted_cpuload(i) * SCHED_LOAD_SCALE;
- wl /= power;
+ wl = weighted_cpuload(i);
+ /*
+ * When comparing with imbalance, use weighted_cpuload()
+ * which is not scaled with the cpu power.
+ */
if (capacity && rq->nr_running == 1 && wl > imbalance)
continue;
+ /*
+ * For the load comparisons with the other cpu's, consider
+ * the weighted_cpuload() scaled with the cpu power, so that
+ * the load can be moved away from the cpu that is potentially
+ * running at a lower capacity.
+ */
+ wl = (wl * SCHED_LOAD_SCALE) / power;
+
if (wl > max_load) {
max_load = wl;
busiest = rq;
@@ -5998,7 +6009,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
unsigned long flags;
int oldprio, on_rq, running;
struct rq *rq;
- const struct sched_class *prev_class = p->sched_class;
+ const struct sched_class *prev_class;
BUG_ON(prio < 0 || prio > MAX_PRIO);
@@ -6006,6 +6017,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
update_rq_clock(rq);
oldprio = p->prio;
+ prev_class = p->sched_class;
on_rq = p->se.on_rq;
running = task_current(rq, p);
if (on_rq)
@@ -6233,7 +6245,7 @@ static int __sched_setscheduler(struct task_struct *p, int policy,
{
int retval, oldprio, oldpolicy = -1, on_rq, running;
unsigned long flags;
- const struct sched_class *prev_class = p->sched_class;
+ const struct sched_class *prev_class;
struct rq *rq;
int reset_on_fork;
@@ -6347,6 +6359,7 @@ recheck:
p->sched_reset_on_fork = reset_on_fork;
oldprio = p->prio;
+ prev_class = p->sched_class;
__setscheduler(rq, p, policy, param->sched_priority);
if (running)
diff --git a/lib/idr.c b/lib/idr.c
index 80ca9ac..eda7ba3 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -156,10 +156,12 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
/* if already at the top layer, we need to grow */
- if (!(p = pa[l])) {
+ if (id >= 1 << (idp->layers * IDR_BITS)) {
*starting_id = id;
return IDR_NEED_TO_GROW;
}
+ p = pa[l];
+ BUG_ON(!p);
/* If we need to go up one layer, continue the
* loop; otherwise, restart from the top.
diff --git a/mm/fadvise.c b/mm/fadvise.c
index e433592..8d723c9 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -77,12 +77,20 @@ SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
switch (advice) {
case POSIX_FADV_NORMAL:
file->f_ra.ra_pages = bdi->ra_pages;
+ spin_lock(&file->f_lock);
+ file->f_mode &= ~FMODE_RANDOM;
+ spin_unlock(&file->f_lock);
break;
case POSIX_FADV_RANDOM:
- file->f_ra.ra_pages = 0;
+ spin_lock(&file->f_lock);
+ file->f_mode |= FMODE_RANDOM;
+ spin_unlock(&file->f_lock);
break;
case POSIX_FADV_SEQUENTIAL:
file->f_ra.ra_pages = bdi->ra_pages * 2;
+ spin_lock(&file->f_lock);
+ file->f_mode &= ~FMODE_RANDOM;
+ spin_unlock(&file->f_lock);
break;
case POSIX_FADV_WILLNEED:
if (!mapping->a_ops->readpage) {
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 9092b43..83cd9bb 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -426,6 +426,8 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
list_for_each_entry(c, &p->children, sibling) {
if (c->mm == p->mm)
continue;
+ if (mem && !task_in_mem_cgroup(c, mem))
+ continue;
if (!oom_kill_task(c))
return 0;
}
diff --git a/mm/readahead.c b/mm/readahead.c
index aa1aa23..8f40b47 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -501,6 +501,12 @@ void page_cache_sync_readahead(struct address_space *mapping,
if (!ra->ra_pages)
return;
+ /* be dumb */
+ if (filp->f_mode & FMODE_RANDOM) {
+ force_page_cache_readahead(mapping, filp, offset, req_size);
+ return;
+ }
+
/* do read-ahead */
ondemand_readahead(mapping, ra, filp, false, offset, req_size);
}
diff --git a/mm/slab.c b/mm/slab.c
index 7dfa481..5d1a782 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -971,13 +971,11 @@ static struct array_cache **alloc_alien_cache(int node, int limit, gfp_t gfp)
if (limit > 1)
limit = 12;
- ac_ptr = kmalloc_node(memsize, gfp, node);
+ ac_ptr = kzalloc_node(memsize, gfp, node);
if (ac_ptr) {
for_each_node(i) {
- if (i == node || !node_online(i)) {
- ac_ptr[i] = NULL;
+ if (i == node || !node_online(i))
continue;
- }
ac_ptr[i] = alloc_arraycache(node, limit, 0xbaadf00d, gfp);
if (!ac_ptr[i]) {
for (i--; i >= 0; i--)
diff --git a/net/core/dev.c b/net/core/dev.c
index 584046e..74d0cce 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2630,7 +2630,7 @@ int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
switch (ret) {
case GRO_NORMAL:
case GRO_HELD:
- skb->protocol = eth_type_trans(skb, napi->dev);
+ skb->protocol = eth_type_trans(skb, skb->dev);
if (ret == GRO_NORMAL)
return netif_receive_skb(skb);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 427ded8..d5617d4 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -366,7 +366,8 @@ static ssize_t wireless_show(struct device *d, char *buf,
const struct iw_statistics *iw;
ssize_t ret = -EINVAL;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return restart_syscall();
if (dev_isalive(dev)) {
iw = get_wireless_stats(dev);
if (iw)
diff --git a/net/core/scm.c b/net/core/scm.c
index b7ba91b..9b26463 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -156,6 +156,8 @@ int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *p)
switch (cmsg->cmsg_type)
{
case SCM_RIGHTS:
+ if (!sock->ops || sock->ops->family != PF_UNIX)
+ goto error;
err=scm_fp_copy(cmsg, &p->fp);
if (err<0)
goto error;
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 0030e73..cc35645 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1351,14 +1351,19 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write,
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *valp != val) {
struct net *net = ctl->extra2;
if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *valp = val;
+ *ppos = pos;
return restart_syscall();
+ }
if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
inet_forward_change(net);
} else if (*valp) {
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index d41e5de..169da93 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -946,7 +946,6 @@ int igmp_rcv(struct sk_buff *skb)
break;
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
- case IGMPV3_HOST_MEMBERSHIP_REPORT:
/* Is it our report looped back? */
if (skb_rtable(skb)->fl.iif == 0)
break;
@@ -960,6 +959,7 @@ int igmp_rcv(struct sk_buff *skb)
in_dev_put(in_dev);
return pim_rcv_v1(skb);
#endif
+ case IGMPV3_HOST_MEMBERSHIP_REPORT:
case IGMP_DVMRP:
case IGMP_TRACE:
case IGMP_HOST_LEAVE_MESSAGE:
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1fd0a3d..d1f77cc 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -504,8 +504,11 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
if (p == &net->ipv6.devconf_dflt->forwarding)
return 0;
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *p = old;
return restart_syscall();
+ }
if (p == &net->ipv6.devconf_all->forwarding) {
__s32 newf = net->ipv6.devconf_all->forwarding;
@@ -3991,12 +3994,15 @@ int addrconf_sysctl_forward(ctl_table *ctl, int write,
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret;
ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_fixup_forwarding(ctl, valp, val);
+ if (ret)
+ *ppos = pos;
return ret;
}
@@ -4075,8 +4081,11 @@ static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old)
if (p == &net->ipv6.devconf_dflt->disable_ipv6)
return 0;
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *p = old;
return restart_syscall();
+ }
if (p == &net->ipv6.devconf_all->disable_ipv6) {
__s32 newf = net->ipv6.devconf_all->disable_ipv6;
@@ -4095,12 +4104,15 @@ int addrconf_sysctl_disable(ctl_table *ctl, int write,
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret;
ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_disable_ipv6(ctl, valp, val);
+ if (ret)
+ *ppos = pos;
return ret;
}
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 4b6a539..bfc8737 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -63,6 +63,7 @@ struct nf_ct_frag6_queue
struct inet_frag_queue q;
__be32 id; /* fragment id */
+ u32 user;
struct in6_addr saddr;
struct in6_addr daddr;
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 89e238b..9144ef0 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -177,7 +177,8 @@ static void sta_addba_resp_timer_expired(unsigned long data)
/* check if the TID waits for addBA response */
spin_lock_bh(&sta->lock);
- if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK)) !=
+ if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK |
+ HT_AGG_STATE_REQ_STOP_BA_MSK)) !=
HT_ADDBA_REQUESTED_MSK) {
spin_unlock_bh(&sta->lock);
*state = HT_AGG_STATE_IDLE;
diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c
index eb0ceb8..1a3b650 100644
--- a/net/netfilter/xt_recent.c
+++ b/net/netfilter/xt_recent.c
@@ -173,10 +173,10 @@ recent_entry_init(struct recent_table *t, const union nf_inet_addr *addr,
static void recent_entry_update(struct recent_table *t, struct recent_entry *e)
{
+ e->index %= ip_pkt_list_tot;
e->stamps[e->index++] = jiffies;
if (e->index > e->nstamps)
e->nstamps = e->index;
- e->index %= ip_pkt_list_tot;
list_move_tail(&e->lru_list, &t->lru_list);
}
@@ -260,7 +260,7 @@ recent_mt(const struct sk_buff *skb, const struct xt_match_param *par)
for (i = 0; i < e->nstamps; i++) {
if (info->seconds && time_after(time, e->stamps[i]))
continue;
- if (++hits >= info->hit_count) {
+ if (info->hit_count && ++hits >= info->hit_count) {
ret = !ret;
break;
}
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 0266cca..dafd341 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -901,11 +901,8 @@ void svc_delete_xprt(struct svc_xprt *xprt)
if (test_bit(XPT_TEMP, &xprt->xpt_flags))
serv->sv_tmpcnt--;
- for (dr = svc_deferred_dequeue(xprt); dr;
- dr = svc_deferred_dequeue(xprt)) {
- svc_xprt_put(xprt);
+ while ((dr = svc_deferred_dequeue(xprt)) != NULL)
kfree(dr);
- }
svc_xprt_put(xprt);
spin_unlock_bh(&serv->sv_lock);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 37c5475..5cdbf7c 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1926,6 +1926,11 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
case -EALREADY:
xprt_clear_connecting(xprt);
return;
+ case -EINVAL:
+ /* Happens, for instance, if the user specified a link
+ * local IPv6 address without a scope-id.
+ */
+ goto out;
}
out_eagain:
status = -EAGAIN;
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index 68c7348..04b6145 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -128,7 +128,7 @@ int ebitmap_netlbl_export(struct ebitmap *ebmap,
cmap_idx = delta / NETLBL_CATMAP_MAPSIZE;
cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
c_iter->bitmap[cmap_idx]
- |= e_iter->maps[cmap_idx] << cmap_sft;
+ |= e_iter->maps[i] << cmap_sft;
}
e_iter = e_iter->next;
}
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index ab73edf..7ba779d 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -314,10 +314,10 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream,
if (!params->info)
params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES;
if (!params->fifo_size) {
- if (snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) ==
- snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) &&
- snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) ==
- snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
+ m = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
+ if (snd_mask_min(m) == snd_mask_max(m) &&
+ snd_interval_min(i) == snd_interval_max(i)) {
changed = substream->ops->ioctl(substream,
SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
if (changed < 0)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index fec8724..673cec3 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2224,7 +2224,12 @@ static int azx_dev_free(struct snd_device *device)
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
{}
};
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 2d603f6..2377e75 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -1003,7 +1003,7 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x81cb, "ASUS M2N", AD1986A_3STACK),
SND_PCI_QUIRK(0x1043, 0x8234, "ASUS M2N", AD1986A_3STACK),
SND_PCI_QUIRK(0x10de, 0xcb84, "ASUS A8N-VM", AD1986A_3STACK),
- SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
+ SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba Satellite L40-10Q", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 8a332d2..03d6aea 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1791,6 +1791,12 @@ static struct ac97_quirk ac97_quirks[] = {
.type = AC97_TUNE_HP_ONLY
},
{
+ .subvendor = 0x110a,
+ .subdevice = 0x0079,
+ .name = "Fujitsu Siemens D1289",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
.subvendor = 0x1019,
.subdevice = 0x0a81,
.name = "ECS K7VTA3",
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index 4d47bc4..10c7550 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -90,12 +90,10 @@ static int ak4104_spi_write(struct snd_soc_codec *codec, unsigned int reg,
if (reg >= codec->reg_cache_size)
return -EINVAL;
- reg &= AK4104_REG_MASK;
- reg |= AK4104_WRITE;
-
/* only write to the hardware if value has changed */
if (cache[reg] != value) {
- u8 tmp[2] = { reg, value };
+ u8 tmp[2] = { (reg & AK4104_REG_MASK) | AK4104_WRITE, value };
+
if (spi_write(spi, tmp, sizeof(tmp))) {
dev_err(&spi->dev, "SPI write failed\n");
return -EIO;
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index f26a125..79633ea 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3326,6 +3326,32 @@ static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
}
/*
+ * This call will put the synth in "USB send" mode, i.e it will send MIDI
+ * messages through USB (this is disabled at startup). The synth will
+ * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
+ * sign on its LCD. Values here are chosen based on sniffing USB traffic
+ * under Windows.
+ */
+static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
+{
+ int err, actual_length;
+
+ /* "midi send" enable */
+ static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
+
+ void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
+ ARRAY_SIZE(seq), &actual_length, 1000);
+ kfree(buf);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/*
* Setup quirks
*/
#define AUDIOPHILE_SET 0x01 /* if set, parse device_setup */
@@ -3616,6 +3642,12 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
goto __err_val;
}
+ /* Access Music VirusTI Desktop */
+ if (id == USB_ID(0x133e, 0x0815)) {
+ if (snd_usb_accessmusic_boot_quirk(dev) < 0)
+ goto __err_val;
+ }
+
/*
* found a config. now register to ALSA
*/
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 0eff19c..b8958f9 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1360,6 +1360,12 @@ static struct port_info {
EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
+ /* Access Music Virus TI */
+ EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
+ PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
+ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SNDRV_SEQ_PORT_TYPE_HARDWARE |
+ SNDRV_SEQ_PORT_TYPE_SYNTHESIZER),
};
static struct port_info *find_port_info(struct snd_usb_midi* umidi, int number)
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f6f201e..391e02f 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -2050,6 +2050,33 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
},
+/* Access Music devices */
+{
+ /* VirusTI Desktop */
+ USB_DEVICE_VENDOR_SPEC(0x133e, 0x0815),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = &(const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0003,
+ .in_cables = 0x0003
+ }
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+
/* */
{
/* aka. Serato Scratch Live DJ Box */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists