| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51f3faa71003161630g69160ea9tc1a2d448682632e5@mail.gmail.com> Date: Tue, 16 Mar 2010 17:30:53 -0600 From: Robert Hancock <hancockrwd@...il.com> To: Jörn Engel <joern@...lin.logfs.org> Cc: David Miller <davem@...emloft.net>, torvalds@...ux-foundation.org, linux-kernel@...r.kernel.org, netdev@...r.kernel.org, romieu@...zoreil.com Subject: Re: [Regression] r8169: enable 64-bit DMA by default for PCI Express devices (v2) On Tue, Mar 16, 2010 at 2:35 AM, Jörn Engel <joern@...lin.logfs.org> wrote: > On Mon, 15 March 2010 17:28:45 -0600, Robert Hancock wrote: >> >> What are the symptoms? > > No more network. :) > > According to ifconfig the interface is up and running. If I read > /sys/class/net/eth0 correctly, two packets have been sent and none > received. LED on network card and switch is off. mii-tool is > unhappy. > > With patch in: > Bikini:~# mii-tool > No MII transceiver present!. > > With patch reverted: > Bikini:~# mii-tool > eth0: negotiated 100baseTx-FD flow-control, link ok > > I just noticed lspci is also unhappy. > > With patch in: > Bikini:~# lspci -vv > lspci > pcilib: sysfs_read_vpd: read failed: Connection timed out. > > With patch reverted: > Bikini:~# lspci -vv > lspci2 > Bikini:~# diff -u lspci* > --- lspci 2010-03-16 09:03:02.000000000 +0100 > +++ lspci2 2010-03-16 09:09:36.000000000 +0100 > @@ -246,7 +246,7 @@ > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [cc] Vital Product Data > - Not readable > + Unknown small resource type 00, will not decode more. > Capabilities: [100] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > As you might expect, delta is part of the ethernet controller. > > All "With patch in" output above is typed off the screen. Beware of > typos. > >> Does setting use_dac=0 in the module options >> for r8169 also resolve the problem? > > /sys/modules/r8169 does not exist. How odd. Anyway, simply changing > the default in r8169.c to 0 fixes the problems for me. Good call. I can't really explain how the MII and lspci output is being affected.. However, it's possible that some of the chips supported by this driver don't actually support 64-bit DMA. Your chip is quite a bit older than mine (RTL8102E seems to be one of the older, if not the oldest, PCI-E chipset supported by the driver). Francois, do you know if that's the case, or do you have any active contacts at Realtek who can say? In the meantime, I don't object to reverting the patch for now unless we get this sorted out quickly.. > >> Full dmesg and lspci -vv output might also be useful. > > Both with patch in: > dmesg: > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.33 (joern@...lin) (gcc version 4.3.3 (Debian 4.3.3-3) ) #40 SMP Tue Mar 16 09:01:02 CET 2010 > [ 0.000000] Command line: vga=9 root=/dev/sda2 loglevel=9 netconsole=4444@....168.0.39/eth0,6666@....168.0.10/00:15:58:C5:ED:A8 BOOT_IMAGE=bzImage > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) > [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6c0000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bf6c0000 - 00000000bf6f0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bf6f0000 - 00000000bf700000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI present. > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CBFFF write-protect > [ 0.000000] CC000-DFFFF uncachable > [ 0.000000] E0000-EFFFF write-through > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F00000000 write-back > [ 0.000000] 1 base 100000000 mask FC0000000 write-back > [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable > [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable > [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6b0000 > [ 0.000000] 0000000000 - 00bf600000 page 2M > [ 0.000000] 00bf600000 - 00bf6b0000 page 4k > [ 0.000000] kernel direct mapping tables up to bf6b0000 @ 16000-1b000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 > [ 0.000000] 0100000000 - 0140000000 page 2M > [ 0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000 > [ 0.000000] ACPI: RSDP 00000000000f9f60 00014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT 00000000bf6b0000 00040 (v01 040209 RSDT1650 20090402 MSFT 00000097) > [ 0.000000] ACPI: FACP 00000000bf6b0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) > [ 0.000000] ACPI: DSDT 00000000bf6b0440 05779 (v01 AS153 AS153151 00000151 INTL 20051117) > [ 0.000000] ACPI: FACS 00000000bf6c0000 00040 > [ 0.000000] ACPI: APIC 00000000bf6b0390 0006C (v01 040209 APIC1650 20090402 MSFT 00000097) > [ 0.000000] ACPI: MCFG 00000000bf6b0400 0003C (v01 040209 OEMMCFG 20090402 MSFT 00000097) > [ 0.000000] ACPI: OEMB 00000000bf6c0040 00071 (v01 040209 OEMB1650 20090402 MSFT 00000097) > [ 0.000000] ACPI: AAFT 00000000bf6b5bc0 00027 (v01 040209 OEMAAFT 20090402 MSFT 00000097) > [ 0.000000] ACPI: GSCI 00000000bf6c00c0 02024 (v01 040209 GMCHSCI 20090402 MSFT 00000097) > [ 0.000000] ACPI: SSDT 00000000bf6c2a10 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000140000000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 > [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] > [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00140000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000bf6b0 > [ 0.000000] 0: 0x00100000 -> 0x00140000 > [ 0.000000] On node 0 totalpages: 1046079 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 > [ 0.000000] Normal zone: 3584 pages used for memmap > [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 24 > [ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff] > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 > [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6c0000 > [ 0.000000] PM: Registered nosave memory: 00000000bf6c0000 - 00000000bf6f0000 > [ 0.000000] PM: Registered nosave memory: 00000000bf6f0000 - 00000000bf700000 > [ 0.000000] PM: Registered nosave memory: 00000000bf700000 - 00000000fed00000 > [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff380000 > [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at bf700000 (gap: bf700000:3f600000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff880002600000 s1918952 r8192 d22552 u2097152 > [ 0.000000] pcpu-alloc: s1918952 r8192 d22552 u2097152 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028159 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: vga=9 root=/dev/sda2 loglevel=9 netconsole=4444@....168.0.39/eth0,6666@....168.0.10/00:15:58:C5:ED:A8 BOOT_IMAGE=bzImage > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] Subtract (56 early reservations) > [ 0.000000] #1 [0001000000 - 000241a810] TEXT DATA BSS > [ 0.000000] #2 [000241b000 - 000241b12b] BRK > [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved > [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf > [ 0.000000] #5 [000009e400 - 00000fcc20] BIOS reserved > [ 0.000000] #6 [00000fcd5c - 00000ff780] BIOS reserved > [ 0.000000] #7 [00000fcc20 - 00000fcd5c] MP-table mpc > [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE > [ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP > [ 0.000000] #10 [0000016000 - 0000019000] PGTABLE > [ 0.000000] #11 [0000019000 - 000001a000] PGTABLE > [ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA > [ 0.000000] #13 [000241b140 - 000241c140] BOOTMEM > [ 0.000000] #14 [000241a840 - 000241ab40] BOOTMEM > [ 0.000000] #15 [0100005000 - 0100006000] BOOTMEM > [ 0.000000] #16 [0100006000 - 0100007000] BOOTMEM > [ 0.000000] #17 [0100200000 - 0103a00000] MEMMAP 0 > [ 0.000000] #18 [000241c140 - 000241c640] BOOTMEM > [ 0.000000] #19 [000241c640 - 000246c640] BOOTMEM > [ 0.000000] #20 [000246c640 - 0002480640] BOOTMEM > [ 0.000000] #21 [0002481000 - 0002482000] BOOTMEM > [ 0.000000] #22 [000241ab40 - 000241ab83] BOOTMEM > [ 0.000000] #23 [000241abc0 - 000241ae60] BOOTMEM > [ 0.000000] #24 [000241ae80 - 000241aee8] BOOTMEM > [ 0.000000] #25 [000241af00 - 000241af68] BOOTMEM > [ 0.000000] #26 [000241af80 - 000241afe8] BOOTMEM > [ 0.000000] #27 [0002480640 - 00024806a8] BOOTMEM > [ 0.000000] #28 [00024806c0 - 0002480728] BOOTMEM > [ 0.000000] #29 [0002480740 - 00024807a8] BOOTMEM > [ 0.000000] #30 [00024807c0 - 0002480828] BOOTMEM > [ 0.000000] #31 [0002480840 - 00024808a8] BOOTMEM > [ 0.000000] #32 [00024808c0 - 0002480928] BOOTMEM > [ 0.000000] #33 [0002480940 - 00024809a8] BOOTMEM > [ 0.000000] #34 [00024809c0 - 0002480a28] BOOTMEM > [ 0.000000] #35 [0002480a40 - 0002480a60] BOOTMEM > [ 0.000000] #36 [0002480a80 - 0002480aa0] BOOTMEM > [ 0.000000] #37 [0002480ac0 - 0002480b3a] BOOTMEM > [ 0.000000] #38 [0002480b40 - 0002480bba] BOOTMEM > [ 0.000000] #39 [0002600000 - 00027dc000] BOOTMEM > [ 0.000000] #40 [0002800000 - 00029dc000] BOOTMEM > [ 0.000000] #41 [0002a00000 - 0002bdc000] BOOTMEM > [ 0.000000] #42 [0002c00000 - 0002ddc000] BOOTMEM > [ 0.000000] #43 [0002480bc0 - 0002480bc8] BOOTMEM > [ 0.000000] #44 [0002480c00 - 0002480c08] BOOTMEM > [ 0.000000] #45 [0002480c40 - 0002480c50] BOOTMEM > [ 0.000000] #46 [0002480c80 - 0002480ca0] BOOTMEM > [ 0.000000] #47 [0002480cc0 - 0002480e10] BOOTMEM > [ 0.000000] #48 [0002480e40 - 0002480ec0] BOOTMEM > [ 0.000000] #49 [0002480ec0 - 0002480f40] BOOTMEM > [ 0.000000] #50 [0002482000 - 000248a000] BOOTMEM > [ 0.000000] #51 [000248a000 - 000248a240] BOOTMEM > [ 0.000000] #52 [0002ddc000 - 0006ddc000] BOOTMEM > [ 0.000000] #53 [000248a240 - 00024aa240] BOOTMEM > [ 0.000000] #54 [00024aa240 - 00024ea240] BOOTMEM > [ 0.000000] #55 [000001a800 - 0000022800] BOOTMEM > [ 0.000000] 23 40 - 80 9e > [ 0.000000] 100 100 - 1000 1000 > [ 0.000000] 24eb 2500 - 2600 2600 > [ 0.000000] 27dc - 2800 > [ 0.000000] 29dc - 2a00 > [ 0.000000] 2bdc - 2c00 > [ 0.000000] 6ddc 6e00 - bf680 bf6b0 > [ 0.000000] 100007 100040 - 100200 100200 > [ 0.000000] 103a00 103a00 - 140000 140000 > [ 0.000000] Memory: 4032292k/5242880k available (3411k kernel code, 1058564k absent, 152024k reserved, 3689k data, 2556k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:1280 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 6367 kB > [ 0.000000] per task-struct memory footprint: 2688 bytes > [ 0.000000] ODEBUG: 11 of 11 active objects replaced > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 2880.133 MHz processor. > [ 0.004030] Calibrating delay loop (skipped), value calculated using timer frequency.. 5760.26 BogoMIPS (lpj=11520532) > [ 0.004700] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.008489] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.009422] Mount-cache hash table entries: 256 > [ 0.010361] Initializing cgroup subsys ns > [ 0.010368] Initializing cgroup subsys cpuacct > [ 0.010382] Initializing cgroup subsys devices > [ 0.010479] CPU: Physical Processor ID: 0 > [ 0.010483] CPU: Processor Core ID: 0 > [ 0.010488] mce: CPU supports 6 MCE banks > [ 0.010496] CPU0: Thermal monitoring enabled (TM2) > [ 0.010506] using mwait in idle threads. > [ 0.010510] Performance Events: Core2 events, Intel PMU driver. > [ 0.010524] ... version: 2 > [ 0.010527] ... bit width: 40 > [ 0.010530] ... generic registers: 2 > [ 0.010534] ... value mask: 000000ffffffffff > [ 0.010538] ... max period: 000000007fffffff > [ 0.010541] ... fixed-purpose events: 3 > [ 0.010544] ... event mask: 0000000700000003 > [ 0.011517] ACPI: Core revision 20100121 > [ 0.028016] ftrace: converting mcount calls to 0f 1f 44 00 00 > [ 0.028024] ftrace: allocating 14208 entries in 56 pages > [ 0.032154] Setting APIC routing to flat > [ 0.032565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.075613] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a > [ 0.076000] lockdep: fixing up alternatives. > [ 0.076000] Booting Node 0, Processors #1 > [ 0.164047] Brought up 2 CPUs > [ 0.164054] Total of 2 processors activated (11519.94 BogoMIPS). > [ 0.164753] khelper used greatest stack depth: 5888 bytes left > [ 0.164753] NET: Registered protocol family 16 > [ 0.164753] ACPI: bus type pci registered > [ 0.164753] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.164753] PCI: not using MMCONFIG > [ 0.164753] PCI: Using configuration type 1 for base access > [ 0.164753] khelper used greatest stack depth: 5808 bytes left > [ 0.172140] bio: create slab <bio-0> at 0 > [ 0.182217] ACPI: EC: Look up EC in DSDT > [ 0.190712] ACPI: Executed 1 blocks of module-level executable AML code > [ 0.205132] ACPI: Interpreter enabled > [ 0.205137] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.205224] ACPI: Using IOAPIC for interrupt routing > [ 0.205312] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.212093] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources > [ 0.328031] ACPI: No dock devices found. > [ 0.328040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.328755] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.328991] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] > [ 0.328991] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] > [ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] > [ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] > [ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0xbf700000-0xdfffffff] > [ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] > [ 0.328991] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff] > [ 0.328991] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07] > [ 0.328991] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] > [ 0.328991] pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff] > [ 0.328991] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.328991] pci 0000:00:1c.0: PME# disabled > [ 0.329041] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.329049] pci 0000:00:1c.1: PME# disabled > [ 0.329129] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] > [ 0.329208] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f] > [ 0.329286] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f] > [ 0.329366] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f] > [ 0.329442] pci 0000:00:1d.7: reg 10: [mem 0xfea77c00-0xfea77fff] > [ 0.329522] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.329530] pci 0000:00:1d.7: PME# disabled > [ 0.329726] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > [ 0.329735] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO > [ 0.329743] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO > [ 0.329750] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff) > [ 0.329758] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 003f) > [ 0.329824] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] > [ 0.329835] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] > [ 0.329846] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] > [ 0.329856] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] > [ 0.329867] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] > [ 0.329928] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] > [ 0.329938] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] > [ 0.329948] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] > [ 0.329958] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] > [ 0.329968] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f] > [ 0.330010] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.330016] pci 0000:00:1f.2: PME# disabled > [ 0.330085] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] > [ 0.330192] pci 0000:00:1c.0: PCI bridge to [bus 02-02] > [ 0.330199] pci 0000:00:1c.0: bridge window [io f000 - 0000] reg reading > [ 0.330207] pci 0000:00:1c.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading > [ 0.330219] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] > [ 0.330329] pci 0000:01:00.0: reg 10: [io 0xe800-0xe8ff] > [ 0.330359] pci 0000:01:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref] > [ 0.330381] pci 0000:01:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref] > [ 0.330395] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > [ 0.330454] pci 0000:01:00.0: supports D1 D2 > [ 0.330458] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.330467] pci 0000:01:00.0: PME# disabled > [ 0.330500] pci 0000:00:1c.1: PCI bridge to [bus 01-01] > [ 0.330507] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] > [ 0.330515] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] > [ 0.330526] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] > [ 0.330638] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) > [ 0.330646] pci 0000:00:1e.0: bridge window [io f000 - 0000] reg reading > [ 0.330654] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading > [ 0.330666] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading > [ 0.330672] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > [ 0.330678] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > [ 0.330683] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > [ 0.330690] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) > [ 0.330696] pci 0000:00:1e.0: bridge window [mem 0xbf700000-0xdfffffff] (subtractive decode) > [ 0.330702] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) > [ 0.330733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.332114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 0.332536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 0.332681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > [ 0.357702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 0.357702] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [ 0.357702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) > [ 0.357702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 0.357702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.357702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.357702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.357702] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) > [ 0.360218] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.360218] vgaarb: loaded > [ 0.360347] SCSI subsystem initialized > [ 0.360347] libata version 3.00 loaded. > [ 0.360347] usbcore: registered new interface driver usbfs > [ 0.360347] usbcore: registered new interface driver hub > [ 0.360347] usbcore: registered new device driver usb > [ 0.360347] PCI: Using ACPI for IRQ routing > [ 0.360347] PCI: pci_cache_line_size set to 64 bytes > [ 0.360347] reserve RAM buffer: 000000000009f800 - 000000000009ffff > [ 0.360347] reserve RAM buffer: 00000000bf6b0000 - 00000000bfffffff > [ 0.360347] hpet clockevent registered > [ 0.360347] HPET: 3 timers in total, 0 timers will be used for per-cpu timer > [ 0.360347] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.360347] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.372049] Switching to clocksource tsc > [ 0.378630] pnp: PnP ACPI init > [ 0.378664] ACPI: bus type pnp registered > [ 0.386324] pnp: PnP ACPI: found 13 devices > [ 0.386329] ACPI: ACPI bus type pnp unregistered > [ 0.386350] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved > [ 0.386369] system 00:06: [io 0x04d0-0x04d1] has been reserved > [ 0.386375] system 00:06: [io 0x0800-0x087f] has been reserved > [ 0.386380] system 00:06: [io 0x0480-0x04bf] has been reserved > [ 0.386385] system 00:06: [io 0x0900-0x090f] has been reserved > [ 0.386391] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved > [ 0.386396] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved > [ 0.386412] system 00:08: [mem 0xffc00000-0xfff7ffff] has been reserved > [ 0.386432] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.386438] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.386453] system 00:0a: [io 0x0290-0x029f] has been reserved > [ 0.386467] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.386483] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.386489] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved > [ 0.386496] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > [ 0.386503] system 00:0c: [mem 0x00100000-0xbf6fffff] could not be reserved > [ 0.392112] PCI: max bus depth: 1 pci_try_num: 2 > [ 0.392155] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbf700000-0xbfafffff] > [ 0.392163] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > [ 0.392168] pci 0000:00:1c.0: PCI bridge to [bus 02-02] > [ 0.392174] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > [ 0.392183] pci 0000:00:1c.0: bridge window [mem 0xbf700000-0xbfafffff] > [ 0.392191] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] > [ 0.392204] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] > [ 0.392210] pci 0000:00:1c.1: PCI bridge to [bus 01-01] > [ 0.392216] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] > [ 0.392225] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] > [ 0.392232] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] > [ 0.392244] pci 0000:00:1e.0: PCI bridge to [bus 03-03] > [ 0.392248] pci 0000:00:1e.0: bridge window [io disabled] > [ 0.392257] pci 0000:00:1e.0: bridge window [mem disabled] > [ 0.392264] pci 0000:00:1e.0: bridge window [mem pref disabled] > [ 0.392284] pci 0000:00:1c.0: enabling device (0106 -> 0107) > [ 0.392299] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.392307] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.392325] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.392333] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.392345] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.392351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.392355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.392359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.392364] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.392368] pci_bus 0000:00: resource 8 [mem 0xbf700000-0xdfffffff] > [ 0.392372] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] > [ 0.392377] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] > [ 0.392381] pci_bus 0000:02: resource 1 [mem 0xbf700000-0xbfafffff] > [ 0.392385] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] > [ 0.392391] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] > [ 0.392395] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] > [ 0.392399] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] > [ 0.392405] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] > [ 0.392409] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] > [ 0.392413] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.392417] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.392422] pci_bus 0000:03: resource 8 [mem 0xbf700000-0xdfffffff] > [ 0.392426] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff] > [ 0.392542] NET: Registered protocol family 2 > [ 0.392892] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.394859] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > [ 0.398800] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) > [ 0.404716] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.404775] TCP reno registered > [ 0.404833] UDP hash table entries: 2048 (order: 6, 327680 bytes) > [ 0.405251] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) > [ 0.405946] NET: Registered protocol family 1 > [ 0.405987] pci 0000:00:02.0: Boot video device > [ 0.406165] PCI: CLS 32 bytes, default 64 > [ 0.417956] DMA-API: preallocated 32768 debug entries > [ 0.417965] DMA-API: debugging enabled by kernel config > [ 0.417971] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.417977] Placing 64MB software IO TLB between ffff880002ddc000 - ffff880006ddc000 > [ 0.417983] software IO TLB at phys 0x2ddc000 - 0x6ddc000 > [ 0.420717] audit: initializing netlink socket (disabled) > [ 0.420763] type=2000 audit(1268726481.419:1): initialized > [ 0.421241] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.421938] msgmni has been set to 7875 > [ 0.422898] cryptomgr_test used greatest stack depth: 5352 bytes left > [ 0.422962] alg: No test for stdrng (krng) > [ 0.423105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 0.423124] io scheduler noop registered > [ 0.423128] io scheduler deadline registered > [ 0.423160] io scheduler cfq registered (default) > [ 0.423484] pcieport 0000:00:1c.0: setting latency timer to 64 > [ 0.423551] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X > [ 0.424181] pcieport 0000:00:1c.1: setting latency timer to 64 > [ 0.424244] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X > [ 0.426515] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011580000, using 3750k, total 8128k > [ 0.426522] vesafb: mode is 1600x1200x8, linelength=1600, pages=3 > [ 0.426526] vesafb: scrolling: redraw > [ 0.426529] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 > [ 0.444667] Console: switching to colour frame buffer device 200x75 > [ 0.462236] fb0: VESA VGA frame buffer device > [ 0.463660] ACPI: SSDT 00000000bf6c20f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) > [ 0.466926] ACPI: SSDT 00000000bf6c2580 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) > [ 0.484133] intel_rng: FWH not detected > [ 0.484265] Linux agpgart interface v0.103 > [ 0.484463] agpgart-intel 0000:00:00.0: Intel G33 Chipset > [ 0.485627] agpgart-intel 0000:00:00.0: detected 7164K stolen memory > [ 0.495395] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 0.495610] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.501851] brd: module loaded > [ 0.504130] loop: module loaded > [ 0.504466] ata_piix 0000:00:1f.1: version 2.13 > [ 0.504554] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 0.504747] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 0.504984] scsi0 : ata_piix > [ 0.505336] scsi1 : ata_piix > [ 0.510141] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > [ 0.510238] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > [ 0.510394] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 0.510496] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 0.510645] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 0.510829] scsi2 : ata_piix > [ 0.511214] scsi3 : ata_piix > [ 0.516880] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 > [ 0.516979] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 > [ 0.517340] tun: Universal TUN/TAP device driver, 1.6 > [ 0.517411] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> > [ 0.517634] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 0.517731] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 0.517853] r8169 0000:01:00.0: (unregistered net_device): using 64-bit DMA > [ 0.517975] r8169 0000:01:00.0: setting latency timer to 64 > [ 0.518121] r8169 0000:01:00.0: irq 26 for MSI/MSI-X > [ 0.518411] khelper used greatest stack depth: 5136 bytes left > [ 0.518989] r8169 0000:01:00.0: eth0: RTL8102e at 0xffffc9000063e000, 00:19:66:ca:2c:7f, XID 04a00000 IRQ 26 > [ 0.521192] netconsole: local port 4444 > [ 0.521247] netconsole: local IP 192.168.0.39 > [ 0.521307] netconsole: interface eth0 > [ 0.521359] netconsole: remote port 6666 > [ 0.521413] netconsole: remote IP 192.168.0.10 > [ 0.521475] netconsole: remote ethernet address 00:15:58:c5:ed:a8 > [ 0.521564] netconsole: device eth0 not up yet, forcing it > [ 0.523389] r8169 0000:01:00.0: eth0: link down > [ 0.523453] r8169 0000:01:00.0: eth0: link down > [ 0.683957] ata4.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102HB, max UDMA/133 > [ 0.684071] ata4.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 0.691795] ata4.00: configured for UDMA/133 > [ 0.699881] ata3.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 > [ 0.699997] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 0.715852] ata3.00: configured for UDMA/133 > [ 0.716480] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 > [ 0.720035] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) > [ 0.720618] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5 > [ 0.721050] sd 3:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) > [ 0.721222] sd 3:0:0:0: [sdb] Write Protect is off > [ 0.721224] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 0.721293] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.721833] sdb: unknown partition table > [ 0.742050] sd 2:0:0:0: [sda] Write Protect is off > [ 0.742549] sd 3:0:0:0: [sdb] Attached SCSI disk > [ 0.748771] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.752242] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.756154] sda: sda1 sda2 sda3 > [ 0.780333] sd 2:0:0:0: [sda] Attached SCSI disk > [ 1.736062] async/3 used greatest stack depth: 4776 bytes left > [ 1.739753] async/2 used greatest stack depth: 4720 bytes left > [ 4.528033] netconsole: timeout waiting for carrier > [ 6.156819] console [netcon0] enabled > [ 6.156820] netconsole: network logging started > [ 6.157229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 6.157286] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 6.157320] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 6.157324] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 6.157793] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > [ 6.157860] ehci_hcd 0000:00:1d.7: using broken periodic workaround > [ 6.157874] ehci_hcd 0000:00:1d.7: debug port 1 > [ 6.161767] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 6.161803] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00 > [ 6.176032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 6.176180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 6.176182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.176183] usb usb1: Product: EHCI Host Controller > [ 6.176184] usb usb1: Manufacturer: Linux 2.6.33 ehci_hcd > [ 6.176185] usb usb1: SerialNumber: 0000:00:1d.7 > [ 6.176831] hub 1-0:1.0: USB hub found > [ 6.176860] hub 1-0:1.0: 8 ports detected > [ 6.177512] uhci_hcd: USB Universal Host Controller Interface driver > [ 6.202365] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 6.202374] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 6.202378] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 6.202540] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 6.202575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 > [ 6.202667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.202669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.202671] usb usb2: Product: UHCI Host Controller > [ 6.202672] usb usb2: Manufacturer: Linux 2.6.33 uhci_hcd > [ 6.202673] usb usb2: SerialNumber: 0000:00:1d.0 > [ 6.202988] hub 2-0:1.0: USB hub found > [ 6.203030] hub 2-0:1.0: 2 ports detected > [ 6.203335] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 6.203344] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 6.203347] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 6.203508] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > [ 6.203544] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 > [ 6.203639] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.203641] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.203642] usb usb3: Product: UHCI Host Controller > [ 6.203643] usb usb3: Manufacturer: Linux 2.6.33 uhci_hcd > [ 6.203645] usb usb3: SerialNumber: 0000:00:1d.1 > [ 6.203962] hub 3-0:1.0: USB hub found > [ 6.203974] hub 3-0:1.0: 2 ports detected > [ 6.204275] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 6.204284] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 6.204287] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 6.204447] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > [ 6.204499] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 > [ 6.204595] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.204597] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.204599] usb usb4: Product: UHCI Host Controller > [ 6.204600] usb usb4: Manufacturer: Linux 2.6.33 uhci_hcd > [ 6.204601] usb usb4: SerialNumber: 0000:00:1d.2 > [ 6.204978] hub 4-0:1.0: USB hub found > [ 6.204989] hub 4-0:1.0: 2 ports detected > [ 6.205269] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 > [ 6.205278] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 6.205281] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 6.205448] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > [ 6.205498] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 > [ 6.205597] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.205599] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.205600] usb usb5: Product: UHCI Host Controller > [ 6.205601] usb usb5: Manufacturer: Linux 2.6.33 uhci_hcd > [ 6.205602] usb usb5: SerialNumber: 0000:00:1d.3 > [ 6.205912] hub 5-0:1.0: USB hub found > [ 6.205924] hub 5-0:1.0: 2 ports detected > [ 6.206303] Initializing USB Mass Storage driver... > [ 6.206428] usbcore: registered new interface driver usb-storage > [ 6.206429] USB Mass Storage support registered. > [ 6.206889] PNP: No PS/2 controller found. Probing ports directly. > [ 6.251877] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 6.251903] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 6.252259] mice: PS/2 mouse device common for all mice > [ 6.252393] rtc_cmos 00:03: RTC can wake from S4 > [ 6.252606] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 6.252637] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 6.446711] cpuidle: using governor ladder > [ 6.446714] cpuidle: using governor menu > [ 6.449762] usbcore: registered new interface driver hiddev > [ 6.449873] usbcore: registered new interface driver usbhid > [ 6.449874] usbhid: USB HID core driver > [ 6.450050] oprofile: using NMI interrupt. > [ 6.469847] TCP cubic registered > [ 6.469851] NET: Registered protocol family 17 > [ 6.499369] registered taskstats version 1 > [ 6.503448] rtc_cmos 00:03: setting system clock to 2010-03-16 08:01:28 UTC (1268726488) > [ 6.539784] EXT3-fs (sda2): recovery required on readonly filesystem > [ 6.543559] EXT3-fs (sda2): write access will be enabled during recovery > [ 6.587902] kjournald starting. Commit interval 5 seconds > [ 6.591792] EXT3-fs (sda2): recovery complete > [ 6.596352] EXT3-fs (sda2): mounted filesystem with writeback data mode > [ 6.600318] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. > [ 6.604202] Freeing unused kernel memory: 2556k freed > [ 6.609265] Write protecting the kernel read-only data: 6144k > [ 6.613463] Freeing unused kernel memory: 664k freed > [ 6.617826] Freeing unused kernel memory: 332k freed > [ 6.860063] usb 3-2: new low speed USB device using uhci_hcd and address 2 > [ 7.115503] usb 3-2: New USB device found, idVendor=1241, idProduct=1503 > [ 7.119525] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 7.123498] usb 3-2: Product: USB Keyboard > [ 7.127376] usb 3-2: Manufacturer: > [ 7.181976] input: USB Keyboard as /class/input/input0 > [ 7.186467] generic-usb 0003:1241:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0 > [ 7.274776] input: USB Keyboard as /class/input/input1 > [ 7.279002] generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1 > [ 7.338603] stty used greatest stack depth: 3744 bytes left > [ 7.724093] touch used greatest stack depth: 3664 bytes left > [ 8.919804] egrep used greatest stack depth: 3344 bytes left > [ 10.713241] EXT3-fs (sda2): using internal journal > [ 11.708808] kjournald starting. Commit interval 5 seconds > [ 11.713511] EXT3-fs (sda1): using internal journal > [ 11.718095] EXT3-fs (sda1): mounted filesystem with writeback data mode > [ 12.975258] rc used greatest stack depth: 3136 bytes left > > lspci -vv: > 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) > Subsystem: ASRock Incorporation Device 29c0 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > Kernel driver in use: agpgart-intel > > 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) > Subsystem: ASRock Incorporation Device 29c2 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at dc00 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at fe900000 (32-bit, non-prefetchable) [size=1M] > Expansion ROM at <unassigned> [disabled] > Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: bf700000-bfafffff > Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 11, PowerLimit 25.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 4149 > Capabilities: [90] Subsystem: ASRock Incorporation Device 27d0 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport > > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: feb00000-febfffff > Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 4151 > Capabilities: [90] Subsystem: ASRock Incorporation Device 27d2 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation Device 27c8 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at d400 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation Device 27c9 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at d480 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation Device 27ca > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at d800 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASRock Incorporation Device 27cb > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 16 > Region 4: I/O ports at d880 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) > Subsystem: ASRock Incorporation Device 27cc > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at fea77c00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: ASRock Incorporation Device 244e > > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) > Subsystem: ASRock Incorporation Device 27b8 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: ASRock Incorporation Device 27df > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ > Latency: 0 > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ffa0 [size=16] > Kernel driver in use: ata_piix > > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: ASRock Incorporation Device 27c0 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at d080 [size=8] > Region 1: I/O ports at d000 [size=4] > Region 2: I/O ports at cc00 [size=8] > Region 3: I/O ports at c880 [size=4] > Region 4: I/O ports at c800 [size=16] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ata_piix > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) > Subsystem: ASRock Incorporation Device 27da > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 5 > Region 4: I/O ports at 0400 [size=32] > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > Subsystem: ASRock Incorporation Device 8136 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 26 > Region 0: I/O ports at e800 [size=256] > Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K] > [virtual] Expansion ROM at fde00000 [disabled] [size=128K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 4169 > Capabilities: [70] Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [ac] MSI-X: Enable- Count=2 Masked- > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [cc] Vital Product Data > Not readable > Capabilities: [100] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [140] Virtual Channel <?> > Capabilities: [160] Device Serial Number 08-00-00-00-ff-ff-00-00 > Kernel driver in use: r8169 > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists