Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34-rc1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 8 14:01:59 PST 2010 Command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. NX (Execute Disable) protection: active DMI 2.3 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x27ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000280000000 aka 10240M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7fe50 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f4f80] f4f80 init_memory_mapping: 0000000000000000-000000007fe50000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe50000 page 4k kernel direct mapping tables up to 7fe50000 @ 8000-c000 init_memory_mapping: 0000000100000000-000000027ffff000 0100000000 - 027fe00000 page 2M 027fe00000 - 027ffff000 page 4k kernel direct mapping tables up to 27ffff000 @ a000-16000 RAMDISK: 37d77000 - 37feff29 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E) ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E) ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 000000007fe50100 00040 ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E) ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000) ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-180000000 SRAT: Node 1 PXM 1 180000000-280000000 NUMA: Allocated memnodemap from 11000 - 16040 NUMA: Using 20 for the hash shift. Initmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000100000000 - 0000000100013fff] Initmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180013fff] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 [ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0027ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007fe50 0: 0x00100000 -> 0x00180000 1: 0x00180000 -> 0x0027ffff On node 0 totalpages: 1048046 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3942 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048575 Normal zone: 14336 pages used for memmap Normal zone: 1034239 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs early_res array is doubled to 64 at [7000 - 77ff] nr_irqs_gsi: 62 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Embedded 29 pages/cpu @ffff880001e00000 s90088 r8192 d20504 u1048576 pcpu-alloc: s90088 r8192 d20504 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 2 [1] 1 3 early_res array is doubled to 128 at [16040 - 1703f] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060781 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ c000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Subtract (63 early reservations) #1 [0001000000 - 0001c4fb58] TEXT DATA BSS #2 [0037d77000 - 0037feff29] RAMDISK #3 [0001c50000 - 0001c5010c] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000f1bf8] BIOS reserved #7 [00000f1e2c - 00000f4f80] BIOS reserved #8 [00000f1bf8 - 00000f1e2c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 0000011000] PGTABLE #13 [0000011000 - 0000016040] MEMNODEMAP #14 [0100000000 - 0100014000] NODE_DATA #15 [0180000000 - 0180014000] NODE_DATA #16 [0001c50140 - 0001c51140] BOOTMEM #17 [0001c4fb80 - 0001c4fe80] BOOTMEM #18 [0180014000 - 0180014300] BOOTMEM #19 [0100014000 - 0100015000] BOOTMEM #20 [0100015000 - 0100016000] BOOTMEM #21 [0100200000 - 0103a00000] MEMMAP 0 #22 [0180200000 - 0183a00000] MEMMAP 1 #23 [0001c4fe80 - 0001c50000] BOOTMEM #24 [0001c51140 - 0001c69140] BOOTMEM #25 [0001c69140 - 0001c75140] BOOTMEM #26 [0180014300 - 018002c300] BOOTMEM #27 [0001c76000 - 0001c77000] BOOTMEM #28 [0001c75140 - 0001c75181] BOOTMEM #29 [0001c751c0 - 0001c75246] BOOTMEM #30 [0001c75280 - 0001c754e8] BOOTMEM #31 [0001c75500 - 0001c75568] BOOTMEM #32 [0001c75580 - 0001c755e8] BOOTMEM #33 [0001c75600 - 0001c75668] BOOTMEM #34 [0001c75680 - 0001c756e8] BOOTMEM #35 [0001c75700 - 0001c75768] BOOTMEM #36 [0001c75780 - 0001c757e8] BOOTMEM #37 [0001c75800 - 0001c75868] BOOTMEM #38 [0001c75880 - 0001c758e8] BOOTMEM #39 [0001c75900 - 0001c75968] BOOTMEM #40 [0001c75980 - 0001c759e8] BOOTMEM #41 [0001c75a00 - 0001c75a20] BOOTMEM #42 [0001c75a40 - 0001c75a60] BOOTMEM #43 [0001c75a80 - 0001c75b49] BOOTMEM #44 [0001c75b80 - 0001c75c49] BOOTMEM #45 [0001e00000 - 0001e1d000] BOOTMEM #46 [0001f00000 - 0001f1d000] BOOTMEM #47 [0183a00000 - 0183a1d000] BOOTMEM #48 [0183b00000 - 0183b1d000] BOOTMEM #49 [0001c75c80 - 0001c75c90] BOOTMEM #50 [0001c75cc0 - 0001c75cd0] BOOTMEM #51 [0001c75d00 - 0001c75d10] BOOTMEM #52 [0001c75d40 - 0001c75d60] BOOTMEM #53 [0001c75d80 - 0001c75ec0] BOOTMEM #54 [0001c75ec0 - 0001c75f20] BOOTMEM #55 [0001c75f40 - 0001c75fa0] BOOTMEM #56 [0001c77000 - 0001c7f000] BOOTMEM #57 [0020000000 - 0024000000] BOOTMEM #58 [0001c75fc0 - 0001c75fe0] BOOTMEM #59 [0001f1d000 - 0005f1d000] BOOTMEM #60 [0001c7f000 - 0001c9f000] BOOTMEM #61 [0001c9f000 - 0001cdf000] BOOTMEM #62 [0000017040 - 000001f040] BOOTMEM 7 - 8 20 40 - 80 9f 100 100 - 1000 1000 1cdf 1d00 - 1e00 1e00 1e1d 1e40 - 1f00 1f00 5f1d 5f40 - 20000 20000 24000 24000 - 37d40 37d77 37ff0 38000 - 7fe40 7fe50 100016 100040 - 100200 100200 103a00 103a00 - 180000 180000 18002d 180040 - 180200 180200 183a1d 183a40 - 183b00 183b00 183b1d 183b40 - 27ffc0 27ffff Memory: 8124160k/10485756k available (3844k kernel code, 2099272k absent, 262324k reserved, 5289k data, 1292k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2612.028 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.05 BogoMIPS (lpj=2612028) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 calling migration_init+0x0/0x5a @ 1 initcall migration_init+0x0/0x5a returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x5a @ 1 initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs calling init_call_single_data+0x0/0x82 @ 1 initcall init_call_single_data+0x0/0x82 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x75 @ 1 initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1d6 @ 1 initcall tracer_alloc_buffers+0x0/0x1d6 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling mce_amd_init+0x0/0x2d @ 1 initcall mce_amd_init+0x0/0x2d returned 0 after 0 usecs Booting Node 1, Processors #1 Ok. Booting Node 0, Processors #2 Ok. Booting Node 1, Processors #3 Ok. Brought up 4 CPUs Total of 4 processors activated (20895.42 BogoMIPS). Testing NMI watchdog ... OK. calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0x150 @ 1 initcall net_ns_init+0x0/0x150 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x41 @ 1 initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling init_smp_flush+0x0/0x21 @ 1 initcall init_smp_flush+0x0/0x21 returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xa @ 1 initcall alloc_frozen_cpus+0x0/0xa returned 0 after 0 usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs calling async_init+0x0/0x61 @ 1 initcall async_init+0x0/0x61 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x2c @ 1 initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs calling init_hw_breakpoint+0x0/0x12 @ 1 initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x42 @ 1 initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5a @ 1 initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs calling securityfs_init+0x0/0x51 @ 1 initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs calling random32_init+0x0/0xd1 @ 1 initcall random32_init+0x0/0xd1 returned 0 after 0 usecs calling gnttab_init+0x0/0x169 @ 1 initcall gnttab_init+0x0/0x169 returned -19 after 0 usecs calling early_resume_init+0x0/0x19b @ 1 Time: 14:13:38 Date: 03/08/10 initcall early_resume_init+0x0/0x19b returned 0 after 976 usecs calling cpufreq_core_init+0x0/0x8c @ 1 initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x14c @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling xenbus_probe_init+0x0/0xcb @ 1 initcall xenbus_probe_init+0x0/0xcb returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc3 @ 1 initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs calling register_node_type+0x0/0x12 @ 1 initcall register_node_type+0x0/0x12 returned 0 after 0 usecs calling i2c_init+0x0/0x6b @ 1 initcall i2c_init+0x0/0x6b returned 0 after 0 usecs calling amd_postcore_init+0x0/0x8bd @ 1 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00, 3f] on node 0 link 1 bus: 00 index 0 [io 0x0000-0x3fff] bus: 00 index 1 [mem 0x90000000-0xfddfffff] bus: 00 index 2 [mem 0x80000000-0x83ffffff] bus: 00 index 3 [mem 0x000a0000-0x000bffff] bus: 00 index 4 [mem 0xfe000000-0xffffffff] bus: 00 index 5 [mem 0x280000000-0xfcffffffff] bus: [40, ff] on node 1 link 2 bus: 40 index 0 [io 0x4000-0xffff] bus: 40 index 1 [mem 0xfde00000-0xfdffffff] bus: 40 index 2 [mem 0x84000000-0x8fffffff] initcall amd_postcore_init+0x0/0x8bd returned 0 after 23437 usecs calling arch_kdebugfs_init+0x0/0x242 @ 1 initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x63 @ 1 initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling acpi_pci_init+0x0/0x5c @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs calling dmi_id_init+0x0/0x31a @ 1 initcall dmi_id_init+0x0/0x31a returned 0 after 0 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xbf @ 1 initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs calling pci_arch_init+0x0/0x69 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. initcall pci_arch_init+0x0/0x69 returned 0 after 3906 usecs calling topology_init+0x0/0x86 @ 1 initcall topology_init+0x0/0x86 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x216 @ 1 initcall param_sysfs_init+0x0/0x216 returned 0 after 4882 usecs calling pm_sysrq_init+0x0/0x19 @ 1 initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x39 @ 1 initcall init_slow_work+0x0/0x39 returned 0 after 0 usecs calling default_bdi_init+0x0/0xb6 @ 1 initcall default_bdi_init+0x0/0xb6 returned 0 after 0 usecs calling init_bio+0x0/0xe2 @ 1 bio: create slab at 0 initcall init_bio+0x0/0xe2 returned 0 after 976 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x68 @ 1 initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs calling genhd_device_init+0x0/0x66 @ 1 initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs calling pci_slot_init+0x0/0x45 @ 1 initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x2d8 @ 1 ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI motherboard resources initcall acpi_init+0x0/0x2d8 returned 0 after 41015 usecs calling dock_init+0x0/0xa5 @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0xa5 returned 0 after 976 usecs calling acpi_pci_root_init+0x0/0x2d @ 1 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x1000-0x3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xfddfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x83ffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xf7de0000-0xf7de0fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xf7dd0000-0xf7dd00ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref] pci 0000:01:03.0: reg 14: [io 0x1000-0x10ff] pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:03.0: supports D1 D2 pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: reg 10: [io 0x1400-0x14ff] pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff] pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff] pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: reg 20: [io 0x1800-0x181f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref] pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x90000000-0xfddfffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x80000000-0x83ffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xfe000000-0xffffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x280000000-0xfcffffffff] (subtractive decode) pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0b.0: PCI bridge to [bus 02-03] pci 0000:00:0b.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0b.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0c.0: PCI bridge to [bus 04-05] pci 0000:00:0c.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0d.0: PCI bridge to [bus 06-07] pci 0000:00:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:07:04.0: reg 10: [mem 0xfdcf0000-0xfdcfffff 64bit] pci 0000:07:04.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit] pci 0000:07:04.0: PME# supported from D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: reg 10: [mem 0xfdcd0000-0xfdcdffff 64bit] pci 0000:07:04.1: reg 18: [mem 0xfdcc0000-0xfdccffff 64bit] pci 0000:07:04.1: PME# supported from D3hot D3cold pci 0000:07:04.1: PME# disabled pci 0000:06:00.0: PCI bridge to [bus 07-07] pci 0000:06:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:06:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:08:00.0: reg 10: [mem 0xfddf0000-0xfddf0fff 64bit] pci 0000:08:00.0: reg 18: [mem 0xfdde0000-0xfdde00ff 64bit] pci 0000:08:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:08:00.1: reg 10: [mem 0xfddd0000-0xfddd0fff 64bit] pci 0000:08:00.1: reg 18: [mem 0xfddc0000-0xfddc00ff 64bit] pci 0000:08:00.1: reg 20: [io 0x3400-0x34ff] pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: PCI bridge to [bus 08-0a] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci_root PNP0A03:01: host bridge window [io 0x4000-0xffff] (ignored) pci_root PNP0A03:01: host bridge window [mem 0xfde00000-0xfdffffff] (ignored) pci_root PNP0A03:01: host bridge window [mem 0x84000000-0x8fffffff] (ignored) pci 0000:40:01.0: reg 14: [mem 0xfdef0000-0xfdef0fff] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:40:0c.0: PCI bridge to [bus 41-43] pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:42:08.0: reg 10: [mem 0xfdf80000-0xfdffffff 64bit] pci 0000:42:08.0: reg 18: [io 0x4000-0x40ff] pci 0000:42:08.0: reg 1c: [mem 0xfdf70000-0xfdf77fff] pci 0000:42:08.0: reg 30: [mem 0x00000000-0x00003fff pref] pci 0000:42:08.0: supports D1 pci 0000:41:00.0: PCI bridge to [bus 42-43] pci 0000:41:00.0: bridge window [io 0x4000-0x4fff] pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:41:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:42:04.0: PCI bridge to [bus 43-43] pci 0000:42:04.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:42:04.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:42:04.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:40:0d.0: PCI bridge to [bus 44-46] pci 0000:40:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:40:0e.0: PCI bridge to [bus 47-49] pci 0000:40:0e.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 177734 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 28320 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling balloon_init+0x0/0x1b1 @ 1 initcall balloon_init+0x0/0x1b1 returned -19 after 0 usecs calling misc_init+0x0/0xb8 @ 1 initcall misc_init+0x0/0xb8 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x78 @ 1 vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x78 returned 0 after 2929 usecs calling cn_init+0x0/0x9e @ 1 initcall cn_init+0x0/0x9e returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 976 usecs calling ata_init+0x0/0x34e @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x34e returned 0 after 976 usecs calling init_pcmcia_cs+0x0/0x25 @ 1 initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs calling usb_init+0x0/0x175 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x175 returned 0 after 2929 usecs calling serio_init+0x0/0x89 @ 1 initcall serio_init+0x0/0x89 returned 0 after 0 usecs calling input_init+0x0/0x132 @ 1 initcall input_init+0x0/0x132 returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling thermal_init+0x0/0x40 @ 1 initcall thermal_init+0x0/0x40 returned 0 after 0 usecs calling md_init+0x0/0xd0 @ 1 initcall md_init+0x0/0xd0 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0xdb @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f400 - 000000000009ffff reserve RAM buffer: 000000007fe50000 - 000000007fffffff reserve RAM buffer: 000000027ffff000 - 000000027fffffff initcall pci_subsys_init+0x0/0xdb returned 0 after 4882 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x177 @ 1 initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xdc @ 1 initcall pktsched_init+0x0/0xdc returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x67 @ 1 initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x83 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x83 returned 0 after 3906 usecs calling sysctl_init+0x0/0x49 @ 1 initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs calling print_ICs+0x0/0x506 @ 1 initcall print_ICs+0x0/0x506 returned 0 after 0 usecs calling hpet_late_init+0x0/0x1ed @ 1 HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter initcall hpet_late_init+0x0/0x1ed returned 0 after 9765 usecs calling clocksource_done_booting+0x0/0x36 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x36 returned 0 after 1085 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 36 usecs calling tracer_init_debugfs+0x0/0x362 @ 1 initcall tracer_init_debugfs+0x0/0x362 returned 0 after 78 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs calling event_trace_init+0x0/0x1eb @ 1 initcall event_trace_init+0x0/0x1eb returned 0 after 1219 usecs calling init_kprobe_trace+0x0/0x78 @ 1 initcall init_kprobe_trace+0x0/0x78 returned 0 after 3 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 24 usecs calling eventpoll_init+0x0/0xc3 @ 1 initcall eventpoll_init+0x0/0xc3 returned 0 after 6 usecs calling anon_inode_init+0x0/0x123 @ 1 initcall anon_inode_init+0x0/0x123 returned 0 after 8 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs calling acpi_event_init+0x0/0x80 @ 1 initcall acpi_event_init+0x0/0x80 returned 0 after 21 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 62524 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: [io 0x0408-0x040f] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0700-0x073f] has been reserved system 00:01: [io 0x0800-0x08fe] has been reserved system 00:01: [io 0x0900-0x09fe] has been reserved system 00:01: [io 0x09ff] has been reserved system 00:01: [io 0x0a00-0x0afe] has been reserved system 00:01: [io 0x0aff] has been reserved system 00:01: [io 0x0b00-0x0bfe] has been reserved system 00:01: [io 0x0bff] has been reserved system 00:01: [io 0x0c80-0x0c83] has been reserved system 00:01: [io 0x0cd4-0x0cd7] has been reserved system 00:01: [io 0x0f50-0x0f58] has been reserved system 00:01: [io 0x0ca0-0x0ca1] has been reserved system 00:01: [io 0x0ca4-0x0ca5] has been reserved system 00:01: [io 0x0cf9] could not be reserved system 00:01: [io 0x03f8-0x03ff] has been reserved system 00:01: [mem 0x80000000-0x8fffffff] could not be reserved system 00:01: [mem 0xf7df0000-0xf7df0fff] could not be reserved system 00:01: [mem 0xfdef0000-0xfdef0fff] could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 465887 usecs calling chr_dev_init+0x0/0xc7 @ 1 initcall chr_dev_init+0x0/0xc7 returned 0 after 533 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 55 usecs calling init_pcmcia_bus+0x0/0x65 @ 1 initcall init_pcmcia_bus+0x0/0x65 returned 0 after 59 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs calling cpufreq_gov_dbs_init+0x0/0xaf @ 1 initcall cpufreq_gov_dbs_init+0x0/0xaf returned 0 after 136 usecs calling init_acpi_pm_clocksource+0x0/0xef @ 1 initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4426 usecs calling pcibios_assign_resources+0x0/0x76 @ 1 PCI: max bus depth: 3 pci_try_num: 4 pci 0000:00:0b.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref] pci 0000:00:0c.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref] pci 0000:00:0e.0: BAR 9: assigned [mem 0x90200000-0x902fffff pref] pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref] pci 0000:00:09.0: PCI bridge to [bus 01-01] pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref] pci 0000:02:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff pref] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io disabled] pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff pref] pci 0000:00:0b.0: PCI bridge to [bus 02-03] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0b.0: bridge window [mem 0x90000000-0x900fffff pref] pci 0000:04:00.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref] pci 0000:05:00.0: BAR 6: assigned [mem 0x90100000-0x9011ffff pref] pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io disabled] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0x90100000-0x901fffff pref] pci 0000:00:0c.0: PCI bridge to [bus 04-05] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:0c.0: bridge window [mem 0x90100000-0x901fffff pref] pci 0000:06:00.0: PCI bridge to [bus 07-07] pci 0000:06:00.0: bridge window [io disabled] pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:06:00.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 06-07] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:08:00.0: BAR 6: assigned [mem 0x90200000-0x9023ffff pref] pci 0000:08:00.1: BAR 6: assigned [mem 0x90240000-0x9027ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 08-0a] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0e.0: bridge window [mem 0x90200000-0x902fffff pref] pci 0000:40:0c.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref] pci 0000:41:00.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref] pci 0000:42:08.0: BAR 6: assigned [mem 0x84000000-0x84003fff pref] pci 0000:42:04.0: PCI bridge to [bus 43-43] pci 0000:42:04.0: bridge window [io disabled] pci 0000:42:04.0: bridge window [mem disabled] pci 0000:42:04.0: bridge window [mem pref disabled] pci 0000:41:00.0: PCI bridge to [bus 42-43] pci 0000:41:00.0: bridge window [io 0x4000-0x4fff] pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:41:00.0: bridge window [mem 0x84000000-0x840fffff pref] pci 0000:40:0c.0: PCI bridge to [bus 41-43] pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:0c.0: bridge window [mem 0x84000000-0x840fffff pref] pci 0000:40:0d.0: PCI bridge to [bus 44-46] pci 0000:40:0d.0: bridge window [io disabled] pci 0000:40:0d.0: bridge window [mem disabled] pci 0000:40:0d.0: bridge window [mem pref disabled] pci 0000:40:0e.0: PCI bridge to [bus 47-49] pci 0000:40:0e.0: bridge window [io disabled] pci 0000:40:0e.0: bridge window [mem disabled] pci 0000:40:0e.0: bridge window [mem pref disabled] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:40:0c.0: setting latency timer to 64 pci 0000:41:00.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x3fff] pci_bus 0000:00: resource 5 [mem 0x90000000-0xfddfffff] pci_bus 0000:00: resource 6 [mem 0x80000000-0x83ffffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x280000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref] pci_bus 0000:01: resource 4 [io 0x0000-0x3fff] pci_bus 0000:01: resource 5 [mem 0x90000000-0xfddfffff] pci_bus 0000:01: resource 6 [mem 0x80000000-0x83ffffff] pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 8 [mem 0xfe000000-0xffffffff] pci_bus 0000:01: resource 9 [mem 0x280000000-0xfcffffffff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff pref] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff pref] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0x90100000-0x901fffff pref] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:05: resource 2 [mem 0x90100000-0x901fffff pref] pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] pci_bus 0000:08: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:08: resource 2 [mem 0x90200000-0x902fffff pref] pci_bus 0000:40: resource 4 [io 0x4000-0xffff] pci_bus 0000:40: resource 5 [mem 0xfde00000-0xfdffffff] pci_bus 0000:40: resource 6 [mem 0x84000000-0x8fffffff] pci_bus 0000:41: resource 0 [io 0x4000-0x4fff] pci_bus 0000:41: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:41: resource 2 [mem 0x84000000-0x840fffff pref] pci_bus 0000:42: resource 0 [io 0x4000-0x4fff] pci_bus 0000:42: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:42: resource 2 [mem 0x84000000-0x840fffff pref] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2559959 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 8 usecs calling inet_init+0x0/0x204 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) initcall inet_init+0x0/0x204 returned 0 after 180614 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 17601 usecs calling pci_apply_final_quirks+0x0/0xef @ 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping PCI: CLS 64 bytes, default 64 initcall pci_apply_final_quirks+0x0/0xef returned 0 after 254972 usecs calling populate_rootfs+0x0/0x237 @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2531k freed initcall populate_rootfs+0x0/0x237 returned 0 after 92457 usecs calling pci_iommu_init+0x0/0x31 @ 1 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture initcall pci_iommu_init+0x0/0x31 returned 0 after 71931 usecs calling calgary_fixup_tce_spaces+0x0/0xee @ 1 initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 144 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 13 usecs calling sbf_init+0x0/0xd7 @ 1 initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 105 usecs calling add_rtc_cmos+0x0/0xa4 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0xa4 returned 0 after 11965 usecs calling cache_sysfs_init+0x0/0x59 @ 1 initcall cache_sysfs_init+0x0/0x59 returned 0 after 924 usecs calling mcheck_init_device+0x0/0xf2 @ 1 initcall mcheck_init_device+0x0/0xf2 returned 0 after 363 usecs calling threshold_init_device+0x0/0x44 @ 1 initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs calling thermal_throttle_init_device+0x0/0x89 @ 1 initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs calling msr_init+0x0/0x10b @ 1 initcall msr_init+0x0/0x10b returned 0 after 303 usecs calling cpuid_init+0x0/0x10b @ 1 initcall cpuid_init+0x0/0x10b returned 0 after 282 usecs calling ioapic_init_sysfs+0x0/0x99 @ 1 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 165 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 62 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 7 usecs calling init_vdso_vars+0x0/0x19d @ 1 initcall init_vdso_vars+0x0/0x19d returned 0 after 15 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs calling sysenter_setup+0x0/0x2cc @ 1 initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs calling init_sched_debug_procfs+0x0/0x29 @ 1 initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 7 usecs calling proc_schedstat_init+0x0/0x1f @ 1 initcall proc_schedstat_init+0x0/0x1f returned 0 after 1 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 2 usecs calling ioresources_init+0x0/0x36 @ 1 initcall ioresources_init+0x0/0x36 returned 0 after 3 usecs calling uid_cache_init+0x0/0x6e @ 1 initcall uid_cache_init+0x0/0x6e returned 0 after 8 usecs calling init_posix_timers+0x0/0x1b5 @ 1 initcall init_posix_timers+0x0/0x1b5 returned 0 after 2 usecs calling init_posix_cpu_timers+0x0/0x101 @ 1 initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs calling create_proc_profile+0x0/0x236 @ 1 initcall create_proc_profile+0x0/0x236 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 111 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 107 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs calling futex_init+0x0/0x63 @ 1 initcall futex_init+0x0/0x63 returned 0 after 10 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 61 usecs calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs calling crash_notes_memory_init+0x0/0x36 @ 1 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs calling pid_namespaces_init+0x0/0x2d @ 1 initcall pid_namespaces_init+0x0/0x2d returned 0 after 8 usecs calling ikconfig_init+0x0/0x39 @ 1 initcall ikconfig_init+0x0/0x39 returned 0 after 2 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1268057623.500:1): initialized initcall audit_init+0x0/0x133 returned 0 after 27144 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs calling init_kprobes+0x0/0x182 @ 1 initcall init_kprobes+0x0/0x182 returned 0 after 16018 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 41 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs calling init_tracepoints+0x0/0x12 @ 1 initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 3 usecs calling init_events+0x0/0x5f @ 1 initcall init_events+0x0/0x5f returned 0 after 2 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 2 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs calling init_irqsoff_tracer+0x0/0x14 @ 1 initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs calling init_blk_tracer+0x0/0x57 @ 1 initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 3 usecs calling init_per_zone_wmark_min+0x0/0x70 @ 1 initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 488 usecs calling kswapd_init+0x0/0x4d @ 1 initcall kswapd_init+0x0/0x4d returned 0 after 80 usecs calling setup_vmstat+0x0/0xae @ 1 initcall setup_vmstat+0x0/0xae returned 0 after 13 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 3 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 2 usecs calling hugetlb_init+0x0/0x329 @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x329 returned 0 after 27375 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs calling slab_sysfs_init+0x0/0xf0 @ 1 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 3460 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 3 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 3 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 8 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0x70 @ 1 initcall inotify_user_setup+0x0/0x70 returned 0 after 6 usecs calling aio_setup+0x0/0x9e @ 1 initcall aio_setup+0x0/0x9e returned 0 after 146 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs calling init_sys32_ioctl+0x0/0x28 @ 1 initcall init_sys32_ioctl+0x0/0x28 returned 0 after 73 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs calling dquot_init+0x0/0xe0 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xe0 returned 0 after 28692 usecs calling init_v2_quota_format+0x0/0x22 @ 1 initcall init_v2_quota_format+0x0/0x22 returned 0 after 1 usecs calling quota_init+0x0/0x26 @ 1 initcall quota_init+0x0/0x26 returned 0 after 7 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 3 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 2 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 2 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 2 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 3 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 3 usecs calling proc_kcore_init+0x0/0xa9 @ 1 initcall proc_kcore_init+0x0/0xa9 returned 0 after 10 usecs calling vmcore_init+0x0/0x8e2 @ 1 initcall vmcore_init+0x0/0x8e2 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs calling proc_page_init+0x0/0x3c @ 1 initcall proc_page_init+0x0/0x3c returned 0 after 3 usecs calling init_devpts_fs+0x0/0x4d @ 1 initcall init_devpts_fs+0x0/0x4d returned 0 after 17 usecs calling init_ext3_fs+0x0/0x6b @ 1 initcall init_ext3_fs+0x0/0x6b returned 0 after 149 usecs calling journal_init+0x0/0x99 @ 1 initcall journal_init+0x0/0x99 returned 0 after 354 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 5 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 120 usecs calling init_iso9660_fs+0x0/0x6c @ 1 initcall init_iso9660_fs+0x0/0x6c returned 0 after 89 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 16001 initcall ipc_init+0x0/0x23 returned 0 after 14291 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 2 usecs calling init_mqueue_fs+0x0/0xb4 @ 1 initcall init_mqueue_fs+0x0/0xb4 returned 0 after 99 usecs calling key_proc_init+0x0/0x53 @ 1 initcall key_proc_init+0x0/0x53 returned 0 after 4 usecs calling selinux_nf_ip_init+0x0/0x60 @ 1 initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs calling init_sel_fs+0x0/0x69 @ 1 initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 4 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs calling sel_netnode_init+0x0/0x72 @ 1 initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs calling sel_netport_init+0x0/0x72 @ 1 initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 1 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 128 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs calling skcipher_module_init+0x0/0x34 @ 1 initcall skcipher_module_init+0x0/0x34 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 11 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 82 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 52 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 2118 usecs calling proc_genhd_init+0x0/0x36 @ 1 initcall proc_genhd_init+0x0/0x36 returned 0 after 3 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) initcall bsg_init+0x0/0x12e returned 0 after 33601 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 2948 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 15638 usecs calling cfq_init+0x0/0x94 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x94 returned 0 after 12038 usecs calling percpu_counter_startup+0x0/0x19 @ 1 initcall percpu_counter_startup+0x0/0x19 returned 0 after 1 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 108 usecs calling pcie_portdrv_init+0x0/0x58 @ 1 pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X pcieport 0000:00:0e.0: setting latency timer to 64 pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X pcieport 0000:40:0c.0: setting latency timer to 64 pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X pcieport 0000:40:0d.0: setting latency timer to 64 pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X pcieport 0000:40:0e.0: setting latency timer to 64 pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X initcall pcie_portdrv_init+0x0/0x58 returned 0 after 254621 usecs calling aer_service_init+0x0/0x2b @ 1 aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support initcall aer_service_init+0x0/0x2b returned 0 after 226624 usecs calling ioapic_init+0x0/0x1b @ 1 initcall ioapic_init+0x0/0x1b returned 0 after 58 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 24360 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5f returned -19 after 28274 usecs calling fb_console_init+0x0/0x12a @ 1 initcall fb_console_init+0x0/0x12a returned 0 after 59 usecs calling genericbl_init+0x0/0x12 @ 1 initcall genericbl_init+0x0/0x12 returned 0 after 55 usecs calling xenfb_init+0x0/0x44 @ 1 initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs calling vesafb_init+0x0/0x235 @ 1 initcall vesafb_init+0x0/0x235 returned 0 after 123 usecs calling efifb_init+0x0/0x1f2 @ 1 initcall efifb_init+0x0/0x1f2 returned -19 after 3 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 103 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 34921 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 66 usecs calling acpi_processor_init+0x0/0x10a @ 1 initcall acpi_processor_init+0x0/0x10a returned 0 after 661 usecs calling acpi_container_init+0x0/0x4a @ 1 initcall acpi_container_init+0x0/0x4a returned 0 after 1065 usecs calling acpi_thermal_init+0x0/0x7b @ 1 initcall acpi_thermal_init+0x0/0x7b returned 0 after 70 usecs calling evtchn_init+0x0/0x61 @ 1 initcall evtchn_init+0x0/0x61 returned -19 after 0 usecs calling xenfs_init+0x0/0x2d @ 1 XENFS: not registering filesystem on non-xen platform initcall xenfs_init+0x0/0x2d returned 0 after 27283 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xb3 @ 1 initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs calling rand_initialize+0x0/0x2c @ 1 initcall rand_initialize+0x0/0x2c returned 0 after 16 usecs calling tty_init+0x0/0xf5 @ 1 initcall tty_init+0x0/0xf5 returned 0 after 3751 usecs calling pty_init+0x0/0x284 @ 1 initcall pty_init+0x0/0x284 returned 0 after 71 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 15 usecs calling xen_init+0x0/0x78 @ 1 initcall xen_init+0x0/0x78 returned -19 after 0 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 103 usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned 0 after 241 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 16570 usecs calling mod_init+0x0/0x4d @ 1 initcall mod_init+0x0/0x4d returned -19 after 0 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 15625 usecs calling agp_amd64_mod_init+0x0/0x22 @ 1 initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs calling agp_intel_init+0x0/0x29 @ 1 initcall agp_intel_init+0x0/0x29 returned 0 after 78 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 57 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 58 usecs calling drm_core_init+0x0/0x124 @ 1 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x124 returned 0 after 18225 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs calling serial8250_init+0x0/0x161 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_init+0x0/0x161 returned 0 after 646274 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 20884 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 112 usecs calling init_kgdboc+0x0/0x16 @ 1 initcall init_kgdboc+0x0/0x16 returned 0 after 1 usecs calling topology_sysfs_init+0x0/0x4e @ 1 initcall topology_sysfs_init+0x0/0x4e returned 0 after 24 usecs calling brd_init+0x0/0x160 @ 1 brd: module loaded initcall brd_init+0x0/0x160 returned 0 after 10805 usecs calling loop_init+0x0/0x189 @ 1 loop: module loaded initcall loop_init+0x0/0x189 returned 0 after 10745 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs calling mac_hid_init+0x0/0x22 @ 1 initcall mac_hid_init+0x0/0x22 returned 0 after 5 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs calling init_sd+0x0/0x181 @ 1 initcall init_sd+0x0/0x181 returned 0 after 127 usecs calling init_sr+0x0/0x49 @ 1 initcall init_sr+0x0/0x49 returned 0 after 51 usecs calling init_sg+0x0/0x122 @ 1 initcall init_sg+0x0/0x122 returned 0 after 66 usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after 150 usecs calling bnx2_init+0x0/0x1b @ 1 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8 (Feb 15, 2010) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 initcall bnx2_init+0x0/0x1b returned 0 after 484064 usecs calling net_olddevs_init+0x0/0xa0 @ 1 initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs calling init_netconsole+0x0/0x1dd @ 1 netconsole: local port 56816 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 56816 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2 0000:03:00.0: irq 69 for MSI/MSI-X bnx2 0000:03:00.0: eth0: using MSI bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex netconsole: carrier detect appears untrustworthy, waiting 4 seconds , receive & transmit flow control ON bnx2 0000:03:00.0: eth0: NIC SerDes Link is Down bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON Clocksource tsc unstable (delta = 4398045021716 ns) console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1dd returned 0 after 34690244 usecs calling cdrom_init+0x0/0xd @ 1 initcall cdrom_init+0x0/0xd returned 0 after 16 usecs calling mon_init+0x0/0x103 @ 1 initcall mon_init+0x0/0x103 returned 0 after 164 usecs calling i8042_init+0x0/0x3f9 @ 1 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3f9 returned 0 after 54763 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 1 usecs calling mousedev_init+0x0/0x61 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x61 returned 0 after 21870 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 80 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 72 usecs calling psmouse_init+0x0/0x7a @ 1 initcall psmouse_init+0x0/0x7a returned 0 after 118 usecs calling xenkbd_init+0x0/0x44 @ 1 initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs calling cmos_init+0x0/0x6d @ 1 rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs initcall cmos_init+0x0/0x6d returned 0 after 67169 usecs calling dm_init+0x0/0x49 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x49 returned 0 after 36628 usecs calling cpufreq_gov_powersave_init+0x0/0x12 @ 1 initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 1 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs calling cpufreq_gov_dbs_init+0x0/0x64 @ 1 initcall cpufreq_gov_dbs_init+0x0/0x64 returned 0 after 131 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 14625 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 14685 usecs calling efivars_init+0x0/0x1f9 @ 1 initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 146 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 58 usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after 62 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 58 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 59 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 56 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 58 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 59 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 60 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 58 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 58 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 57 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 56 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 57 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 60 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 59 usecs calling ortek_init+0x0/0x1b @ 1 initcall ortek_init+0x0/0x1b returned 0 after 57 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 57 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 58 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 61 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 59 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 58 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 57 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 57 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 61 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 58 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 58 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 59 usecs calling hid_init+0x0/0xc7 @ 1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0xc7 returned 0 after 52017 usecs calling flow_cache_init+0x0/0x187 @ 1 initcall flow_cache_init+0x0/0x187 returned 0 after 26 usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after 1 usecs calling snap_init+0x0/0x38 @ 1 initcall snap_init+0x0/0x38 returned 0 after 3 usecs calling rif_init+0x0/0x84 @ 1 initcall rif_init+0x0/0x84 returned 0 after 12 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 91693 usecs calling xt_init+0x0/0x129 @ 1 initcall xt_init+0x0/0x129 returned 0 after 2 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs calling state_mt_init+0x0/0x17 @ 1 initcall state_mt_init+0x0/0x17 returned 0 after 1 usecs calling sysctl_ipv4_init+0x0/0x4e @ 1 initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 7 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 24 usecs calling ipv4_netfilter_init+0x0/0x12 @ 1 initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 1 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 10 usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs calling ip_tables_init+0x0/0xaf @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xaf returned 0 after 22477 usecs calling iptable_filter_init+0x0/0x6f @ 1 initcall iptable_filter_init+0x0/0x6f returned 0 after 29 usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after 9 usecs calling cubictcp_register+0x0/0x6e @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x6e returned 0 after 8944 usecs calling xfrm_user_init+0x0/0x4d @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4d returned 0 after 15758 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 16741 usecs calling mcheck_debugfs_init+0x0/0x3b @ 1 initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 15 usecs calling severities_debugfs_init+0x0/0x3b @ 1 initcall severities_debugfs_init+0x0/0x3b returned 0 after 2 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs calling update_mp_table+0x0/0x470 @ 1 initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x40 @ 1 initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 113 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x32 @ 1 initcall pat_memtype_list_init+0x0/0x32 returned 0 after 3 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs calling init_oops_id+0x0/0x31 @ 1 initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 initcall pm_qos_power_init+0x0/0x61 returned 0 after 194 usecs calling software_resume+0x0/0x1ec @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1ec returned -2 after 14667 usecs initcall software_resume+0x0/0x1ec returned with error code -2 calling debugfs_kprobe_init+0x0/0x89 @ 1 initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 26 usecs calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 15620 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling random32_reseed+0x0/0x92 @ 1 initcall random32_reseed+0x0/0x92 returned 0 after 15 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs calling pci_sysfs_init+0x0/0x4c @ 1 initcall pci_sysfs_init+0x0/0x4c returned 0 after 350 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 9 usecs calling late_resume_init+0x0/0xf4 @ 1 Magic number: 2:234:232 initcall late_resume_init+0x0/0xf4 returned 0 after 13750 usecs calling scsi_complete_async_scans+0x0/0xf7 @ 1 initcall scsi_complete_async_scans+0x0/0xf7 returned 0 after 0 usecs calling memmap_init+0x0/0x3b @ 1 initcall memmap_init+0x0/0x3b returned 0 after 32 usecs calling pci_mmcfg_late_insert_resources+0x0/0x66 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x66 returned 0 after 1 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs async_waiting @ 1 async_continuing @ 1 after 0 usec Freeing unused kernel memory: 1292k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 232k freed Freeing unused kernel memory: 1920k freed calling ehci_hcd_init+0x0/0x76 [ehci_hcd] @ 743 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected initcall ehci_hcd_init+0x0/0x76 [ehci_hcd] returned 0 after 386787 usecs calling ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 745 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34-rc1 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 398511 usecs calling uhci_hcd_init+0x0/0xc6 [uhci_hcd] @ 747 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34-rc1 uhci_hcd usb usb3: SerialNumber: 0000:01:04.4 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected initcall uhci_hcd_init+0x0/0xc6 [uhci_hcd] returned 0 after 329181 usecs calling cciss_init+0x0/0xa4 [cciss] @ 749 HP CISS Driver (v 3.6.20) cciss: using PCI PM to reset controller usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Virtual Keyboard usb 3-1: Manufacturer: HP input: HP Virtual Keyboard as /class/input/input1 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /class/input/input2 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: New USB device found, idVendor=03f0, idProduct=1327 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Virtual Hub usb 3-2: Manufacturer: HP hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected cciss: controller message 03:00 succeeded ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54 cciss 0000:42:08.0: irq 70 for MSI/MSI-X IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 > cciss/c0d1: p1 p2 initcall cciss_init+0x0/0xa4 [cciss] returned 0 after 2181928 usecs calling shpcd_init+0x0/0x68 [shpchp] @ 752 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 35425 usecs calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 758 initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 211 usecs calling fc_transport_init+0x0/0x85 [scsi_transport_fc] @ 763 initcall fc_transport_init+0x0/0x85 [scsi_transport_fc] returned 0 after 29 usecs calling lpfc_init+0x0/0xd3 [lpfc] @ 764 Emulex LightPulse Fibre Channel SCSI driver 8.3.9 Copyright(c) 2004-2009 Emulex. All rights reserved. ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 lpfc 0000:08:00.0: setting latency timer to 64 scsi0 : on PCI bus 08 device 00 irq 18 lpfc 0000:08:00.0: irq 71 for MSI/MSI-X ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: setting latency timer to 64 scsi1 : on PCI bus 08 device 01 irq 19 lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 lpfc 0000:08:00.1: irq 72 for MSI/MSI-X scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:1:0: Attached scsi generic sg1 type 12 scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:1:8: Attached scsi generic sg2 type 0 scsi 0:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 scsi 0:0:2:0: Attached scsi generic sg3 type 13 sd 0:0:1:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:1:8: [sda] Attached SCSI disk initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 4315172 usecs calling usb_stor_init+0x0/0x4b [usb_storage] @ 802 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x4b [usb_storage] returned 0 after 53681 usecs lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg4 type 12 scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:1:0: Attached scsi generic sg5 type 12 scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:1:8: Attached scsi generic sg6 type 0 sd 1:0:1:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 scsi 1:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 scsi 1:0:2:0: Attached scsi generic sg7 type 13 sd 1:0:1:8: [sdb] Attached SCSI disk calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 804 initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 1 usecs EXT3-fs (cciss/c0d0p3): recovery required on readonly filesystem EXT3-fs (cciss/c0d0p3): write access will be enabled during recovery kjournald starting. Commit interval 5 seconds EXT3-fs (cciss/c0d0p3): recovery complete EXT3-fs (cciss/c0d0p3): mounted filesystem with writeback data mode calling pcspkr_init+0x0/0x12 [pcspkr] @ 1078 calling hwmon_init+0x0/0x112 [hwmon] @ 1115 input: PC Speaker as /class/input/input3 initcall hwmon_init+0x0/0x112 [hwmon] returned 0 after 40682 usecs calling k8temp_init+0x0/0x20 [k8temp] @ 1115 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 15343 usecs calling serio_raw_init+0x0/0x20 [serio_raw] @ 1321 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 21 usecs calling floppy_module_init+0x0/0xd6d [floppy] @ 1330 calling init_tis+0x0/0x92 [tpm_tis] @ 1152 Floppy drive(s): fd0 is 1.44M calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1449 initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 371629 usecs calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 1078 initcall init_tis+0x0/0x92 [tpm_tis] returned 0 after 163507 usecs initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 56654 usecs ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 178608 usecs calling init_soundcore+0x0/0x8b [soundcore] @ 1078 initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 16 usecs calling alsa_sound_init+0x0/0x8f [snd] @ 1078 initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 31 usecs calling alsa_timer_init+0x0/0x187 [snd_timer] @ 1078 initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 55 usecs calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1894 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 7 usecs calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 1918 initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 0 usecs calling alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] @ 1918 initcall alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] returned 0 after 1 usecs calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 1967 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 5 usecs calling enclosure_init+0x0/0x19 [enclosure] @ 1966 initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 14 usecs calling ses_init+0x0/0x40 [ses] @ 1966 ses 0:0:2:0: Attached Enclosure device ses 1:0:2:0: Attached Enclosure device initcall ses_init+0x0/0x40 [ses] returned 0 after 60 usecs calling alsa_seq_init+0x0/0x57 [snd_seq] @ 1994 initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 70 usecs calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 1994 initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 1994 calling phy_init+0x0/0x31 [libphy] @ 1985 initcall phy_init+0x0/0x31 [libphy] returned 0 after 909 usecs calling tg3_init+0x0/0x20 [tg3] @ 1986 tg3.c:v3.108 (February 17, 2010) tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 2058 initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 10 usecs initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 279453 usecs calling pcsp_init+0x0/0x20 [snd_pcsp] @ 1078 Error: Driver 'pcspkr' is already registered, aborting... initcall pcsp_init+0x0/0x20 [snd_pcsp] returned -16 after 3 usecs initcall pcsp_init+0x0/0x20 [snd_pcsp] returned with error code -16 initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned with error code -16 tg3 0000:07:04.0: eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f tg3 0000:07:04.0: eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0]) BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 0 Oops: 0010 [#1] SMP last sysfs file: /sys/block/sdb/removable CPU 3 Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd Pid: 2570, comm: udevd Not tainted 2.6.34-rc1 #1 /ProLiant BL685c G1 RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0000:ffff880183b03e98 EFLAGS: 00010246 RAX: ffff88027d94bfd8 RBX: 00000000000000ea RCX: ffff88027d025d40 RDX: ffff880183b03eb0 RSI: dead000000200200 RDI: 0000000000000000 RBP: ffff880183b03ef0 R08: ffff88027d025d40 R09: 0000000000000632 R10: 0000000000000000 R11: 00000000ffffffff R12: ffffffffa0136900 R13: ffff88027f658000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40) Stack: ffffffff81054e89 0000000000000052 0000000000000000 ffff880183b03eb0 <0> ffff880183b03eb0 ffffffff8101ea60 0000000000000282 0000000000000001 <0> 0000000000000141 0000000000000100 ffffffff81823088 ffff880183b03f40 Call Trace: [] ? run_timer_softirq+0x16d/0x209 [] ? apic_write+0x11/0x13 [] __do_softirq+0xe1/0x1b7 [] call_softirq+0x1c/0x30 [] do_softirq+0x46/0x9f [] irq_exit+0x45/0x84 [] smp_apic_timer_interrupt+0x79/0x87 [] apic_timer_interrupt+0x13/0x20 Code: Bad RIP value. RIP [<(null)>] (null) RSP CR2: 0000000000000000 ---[ end trace 77b6d5c602bfc703 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 Call Trace: [] panic+0x9e/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? consume_skb+0x28/0x2a [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? run_timer_softirq+0x16d/0x209 [] ? apic_write+0x11/0x13 [] __do_softirq+0xe1/0x1b7 [] call_softirq+0x1c/0x30 [] do_softirq+0x46/0x9f [] irq_exit+0x45/0x84 [] smp_apic_timer_interrupt+0x79/0x87 [] apic_timer_interrupt+0x13/0x20 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 0 Oops: 0010 [#2] SMP last sysfs file: /sys/block/sdb/removable CPU 3 Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 /ProLiant BL685c G1 RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0000:ffff880183b03b60 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa01365e0 RDX: ffffffff81a88680 RSI: 0000000000000000 RDI: ffffffffa01365e0 RBP: ffff880183b03b98 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880183b03928 R11: 0000000000000002 R12: 00000000ffffffff R13: 0000000000000000 R14: ffffffff81a88680 R15: 0000000000000000 FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40) Stack: ffffffff813bc87b ffff880183b03b88 ffffffff815825f6 0000000000000246 <0> 0000000000000009 ffff88027d025d40 0000000000000010 ffff880183b03ba8 <0> ffffffff813bc8b0 ffff880183b03bb8 ffffffff813bc8c1 ffff880183b03ca8 Call Trace: [] ? notifier_call_chain+0x33/0x5b [] __atomic_notifier_call_chain+0xd/0xf [] atomic_notifier_call_chain+0xf/0x11 [] panic+0xca/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? consume_skb+0x28/0x2a [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? run_timer_softirq+0x16d/0x209 [] ? apic_write+0x11/0x13 [] __do_softirq+0xe1/0x1b7 [] call_softirq+0x1c/0x30 [] do_softirq+0x46/0x9f [] irq_exit+0x45/0x84 [] smp_apic_timer_interrupt+0x79/0x87 [] apic_timer_interrupt+0x13/0x20 Code: Bad RIP value. RIP [<(null)>] (null) RSP CR2: 0000000000000000 ---[ end trace 77b6d5c602bfc704 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 Call Trace: [] panic+0x9e/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? tick_program_event+0x25/0x27 [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? notifier_call_chain+0x33/0x5b [] __atomic_notifier_call_chain+0xd/0xf [] atomic_notifier_call_chain+0xf/0x11 [] panic+0xca/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? consume_skb+0x28/0x2a [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? run_timer_softirq+0x16d/0x209 [] ? apic_write+0x11/0x13 [] __do_softirq+0xe1/0x1b7 [] call_softirq+0x1c/0x30 [] do_softirq+0x46/0x9f [] irq_exit+0x45/0x84 [] smp_apic_timer_interrupt+0x79/0x87 [] apic_timer_interrupt+0x13/0x20 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 0 Oops: 0010 [#3] SMP last sysfs file: /sys/block/sdb/removable CPU 3 Modules linked in: snd_seq_dummy tg3(+) libphy snd_seq_oss snd_seq_midi_event snd_seq ses enclosure snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc tpm_tis floppy(+) serio_raw tpm k8temp tpm_bios hwmon pcspkr dm_region_hash dm_log usb_storage lpfc scsi_transport_fc scsi_tgt shpchp cciss uhci_hcd ohci_hcd ehci_hcd Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 /ProLiant BL685c G1 RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0000:ffff880183b03830 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa01365e0 RDX: ffffffff81a88680 RSI: 0000000000000000 RDI: ffffffffa01365e0 RBP: ffff880183b03868 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880183b035f8 R11: 0000000000000002 R12: 00000000ffffffff R13: 0000000000000000 R14: ffffffff81a88680 R15: 0000000000000000 FS: 00007fe01e9af710(0000) GS:ffff880183b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000027ea32000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2570, threadinfo ffff88027d94a000, task ffff88027d025d40) Stack: ffffffff813bc87b ffff880183b03858 ffffffff815825f6 0000000000000246 <0> 0000000000000009 ffff88027d025d40 0000000000000010 ffff880183b03878 <0> ffffffff813bc8b0 ffff880183b03888 ffffffff813bc8c1 ffff880183b03978 Call Trace: [] ? notifier_call_chain+0x33/0x5b [] __atomic_notifier_call_chain+0xd/0xf [] atomic_notifier_call_chain+0xf/0x11 [] panic+0xca/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? tick_program_event+0x25/0x27 [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? notifier_call_chain+0x33/0x5b [] __atomic_notifier_call_chain+0xd/0xf [] atomic_notifier_call_chain+0xf/0x11 [] panic+0xca/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] ? consume_skb+0x28/0x2a [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 [] page_fault+0x25/0x30 [] ? run_timer_softirq+0x16d/0x209 [] ? apic_write+0x11/0x13 [] __do_softirq+0xe1/0x1b7 [] call_softirq+0x1c/0x30 [] do_softirq+0x46/0x9f [] irq_exit+0x45/0x84 [] smp_apic_timer_interrupt+0x79/0x87 [] apic_timer_interrupt+0x13/0x20 Code: Bad RIP value. RIP [<(null)>] (null) RSP CR2: 0000000000000000 ---[ end trace 77b6d5c602bfc705 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 2570, comm: udevd Tainted: G D 2.6.34-rc1 #1 Call Trace: [] panic+0x9e/0x123 [] ? spin_unlock_irqrestore+0x9/0xb [] ? kmsg_dump+0x14e/0x176 [] oops_end+0xb1/0xc1 [] no_context+0x1f5/0x204 [] __bad_area_nosemaphore+0x193/0x1b6 [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x14c/0x281 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34-rc1 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 8 14:01:59 PST 2010 Command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. NX (Execute Disable) protection: active DMI 2.3 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x27ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000280000000 aka 10240M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7fe50 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f4f80] f4f80 init_memory_mapping: 0000000000000000-000000007fe50000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe50000 page 4k kernel direct mapping tables up to 7fe50000 @ 8000-c000 init_memory_mapping: 0000000100000000-000000027ffff000 0100000000 - 027fe00000 page 2M 027fe00000 - 027ffff000 page 4k kernel direct mapping tables up to 27ffff000 @ a000-16000 RAMDISK: 37d77000 - 37feff29 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E) ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E) ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 000000007fe50100 00040 ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E) ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000) ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-180000000 SRAT: Node 1 PXM 1 180000000-280000000 NUMA: Allocated memnodemap from 11000 - 16040 NUMA: Using 20 for the hash shift. Initmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000100000000 - 0000000100013fff] Initmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180013fff] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 [ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0027ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007fe50 0: 0x00100000 -> 0x00180000 1: 0x00180000 -> 0x0027ffff On node 0 totalpages: 1048046 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3942 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048575 Normal zone: 14336 pages used for memmap Normal zone: 1034239 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs early_res array is doubled to 64 at [7000 - 77ff] nr_irqs_gsi: 62 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Embedded 29 pages/cpu @ffff880001e00000 s90088 r8192 d20504 u1048576 pcpu-alloc: s90088 r8192 d20504 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 2 [1] 1 3 early_res array is doubled to 128 at [16040 - 1703f] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060781 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 console=ttyS0,115200n8 reset_devices netconsole=56816@139.185.50.77/eth0,56816@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 debug ignore_loglevel initcall_debug 3 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ fa6c000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Subtract (63 early reservations) #1 [0001000000 - 0001c4fb58] TEXT DATA BSS #2 [0037d77000 - 0037feff29] RAMDISK #3 [0001c50000 - 0001c5010c] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000f1bf8] BIOS reserved #7 [00000f1e2c - 00000f4f80] BIOS reserved #8 [00000f1bf8 - 00000f1e2c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 0000011000] PGTABLE #13 [0000011000 - 0000016040] MEMNODEMAP #14 [0100000000 - 0100014000] NODE_DATA #15 [0180000000 - 0180014000] NODE_DATA #16 [0001c50140 - 0001c51140] BOOTMEM #17 [0001c4fb80 - 0001c4fe80] BOOTMEM #18 [0180014000 - 0180014300] BOOTMEM #19 [0100014000 - 0100015000] BOOTMEM #20 [0100015000 - 0100016000] BOOTMEM #21 [0100200000 - 0103a00000] MEMMAP 0 #22 [0180200000 - 0183a00000] MEMMAP 1 #23 [0001c4fe80 - 0001c50000] BOOTMEM #24 [0001c51140 - 0001c69140] BOOTMEM #25 [0001c69140 - 0001c75140] BOOTMEM #26 [0180014300 - 018002c300] BOOTMEM #27 [0001c76000 - 0001c77000] BOOTMEM #28 [0001c75140 - 0001c75181] BOOTMEM #29 [0001c751c0 - 0001c75246] BOOTMEM #30 [0001c75280 - 0001c754e8] BOOTMEM #31 [0001c75500 - 0001c75568] BOOTMEM #32 [0001c75580 - 0001c755e8] BOOTMEM #33 [0001c75600 - 0001c75668] BOOTMEM #34 [0001c75680 - 0001c756e8] BOOTMEM #35 [0001c75700 - 0001c75768] BOOTMEM #36 [0001c75780 - 0001c757e8] BOOTMEM #37 [0001c75800 - 0001c75868] BOOTMEM #38 [0001c75880 - 0001c758e8] BOOTMEM #39 [0001c75900 - 0001c75968] BOOTMEM #40 [0001c75980 - 0001c759e8] BOOTMEM #41 [0001c75a00 - 0001c75a20] BOOTMEM #42 [0001c75a40 - 0001c75a60] BOOTMEM #43 [0001c75a80 - 0001c75b49] BOOTMEM #44 [0001c75b80 - 0001c75c49] BOOTMEM #45 [0001e00000 - 0001e1d000] BOOTMEM #46 [0001f00000 - 0001f1d000] BOOTMEM #47 [0183a00000 - 0183a1d000] BOOTMEM #48 [0183b00000 - 0183b1d000] BOOTMEM #49 [0001c75c80 - 0001c75c90] BOOTMEM #50 [0001c75cc0 - 0001c75cd0] BOOTMEM #51 [0001c75d00 - 0001c75d10] BOOTMEM #52 [0001c75d40 - 0001c75d60] BOOTMEM #53 [0001c75d80 - 0001c75ec0] BOOTMEM #54 [0001c75ec0 - 0001c75f20] BOOTMEM #55 [0001c75f40 - 0001c75fa0] BOOTMEM #56 [0001c77000 - 0001c7f000] BOOTMEM #57 [0020000000 - 0024000000] BOOTMEM #58 [0001c75fc0 - 0001c75fe0] BOOTMEM #59 [0001f1d000 - 0005f1d000] BOOTMEM #60 [0001c7f000 - 0001c9f000] BOOTMEM #61 [0001c9f000 - 0001cdf000] BOOTMEM #62 [0000017040 - 000001f040] BOOTMEM 7 - 8 20 40 - 80 9f 100 100 - 1000 1000 1cdf 1d00 - 1e00 1e00 1e1d 1e40 - 1f00 1f00 5f1d 5f40 - 20000 20000 24000 24000 - 37d40 37d77 37ff0 38000 - 7fe40 7fe50 100016 100040 - 100200 100200 103a00 103a00 - 180000 180000 18002d 180040 - 180200 180200 183a1d 183a40 - 183b00 183b00 183b1d 183b40 - 27ffc0 27ffff Memory: 8124160k/10485756k available (3844k kernel code, 2099272k absent, 262324k reserved, 5289k data, 1292k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2612.128 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.25 BogoMIPS (lpj=2612128) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 calling migration_init+0x0/0x5a @ 1 initcall migration_init+0x0/0x5a returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x5a @ 1 initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs calling init_call_single_data+0x0/0x82 @ 1 initcall init_call_single_data+0x0/0x82 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x75 @ 1 initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1d6 @ 1 initcall tracer_alloc_buffers+0x0/0x1d6 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling mce_amd_init+0x0/0x2d @ 1 initcall mce_amd_init+0x0/0x2d returned 0 after 0 usecs Booting Node 1, Processors #1 Ok. Booting Node 0, Processors #2 Ok. Booting Node 1, Processors #3 Ok. Brought up 4 CPUs Total of 4 processors activated (20895.70 BogoMIPS). Testing NMI watchdog ... OK. calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0x150 @ 1 initcall net_ns_init+0x0/0x150 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x41 @ 1 initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling init_smp_flush+0x0/0x21 @ 1 initcall init_smp_flush+0x0/0x21 returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xa @ 1 initcall alloc_frozen_cpus+0x0/0xa returned 0 after 0 usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs calling async_init+0x0/0x61 @ 1 initcall async_init+0x0/0x61 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x2c @ 1 initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs calling init_hw_breakpoint+0x0/0x12 @ 1 initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x42 @ 1 initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5a @ 1 initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs calling securityfs_init+0x0/0x51 @ 1 initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs calling random32_init+0x0/0xd1 @ 1 initcall random32_init+0x0/0xd1 returned 0 after 0 usecs calling gnttab_init+0x0/0x169 @ 1 initcall gnttab_init+0x0/0x169 returned -19 after 0 usecs calling early_resume_init+0x0/0x19b @ 1 Time: 17:39:27 Date: 03/08/10 initcall early_resume_init+0x0/0x19b returned 0 after 1953 usecs calling cpufreq_core_init+0x0/0x8c @ 1 initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x14c @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling xenbus_probe_init+0x0/0xcb @ 1 initcall xenbus_probe_init+0x0/0xcb returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc3 @ 1 initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs calling register_node_type+0x0/0x12 @ 1 initcall register_node_type+0x0/0x12 returned 0 after 0 usecs calling i2c_init+0x0/0x6b @ 1 initcall i2c_init+0x0/0x6b returned 0 after 0 usecs calling amd_postcore_init+0x0/0x8bd @ 1 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00, 3f] on node 0 link 1 bus: 00 index 0 [io 0x0000-0x3fff] bus: 00 index 1 [mem 0x90000000-0xfddfffff] bus: 00 index 2 [mem 0x80000000-0x83ffffff] bus: 00 index 3 [mem 0x000a0000-0x000bffff] bus: 00 index 4 [mem 0xfe000000-0xffffffff] bus: 00 index 5 [mem 0x280000000-0xfcffffffff] bus: [40, ff] on node 1 link 2 bus: 40 index 0 [io 0x4000-0xffff] bus: 40 index 1 [mem 0xfde00000-0xfdffffff] bus: 40 index 2 [mem 0x84000000-0x8fffffff] initcall amd_postcore_init+0x0/0x8bd returned 0 after 22460 usecs calling arch_kdebugfs_init+0x0/0x242 @ 1 initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x63 @ 1 initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling acpi_pci_init+0x0/0x5c @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs calling dmi_id_init+0x0/0x31a @ 1 initcall dmi_id_init+0x0/0x31a returned 0 after 0 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xbf @ 1 initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs calling pci_arch_init+0x0/0x69 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. initcall pci_arch_init+0x0/0x69 returned 0 after 3906 usecs calling topology_init+0x0/0x86 @ 1 initcall topology_init+0x0/0x86 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x216 @ 1 initcall param_sysfs_init+0x0/0x216 returned 0 after 4882 usecs calling pm_sysrq_init+0x0/0x19 @ 1 initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x39 @ 1 initcall init_slow_work+0x0/0x39 returned 0 after 0 usecs calling default_bdi_init+0x0/0xb6 @ 1 initcall default_bdi_init+0x0/0xb6 returned 0 after 0 usecs calling init_bio+0x0/0xe2 @ 1 bio: create slab at 0 initcall init_bio+0x0/0xe2 returned 0 after 976 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x68 @ 1 initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs calling genhd_device_init+0x0/0x66 @ 1 initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs calling pci_slot_init+0x0/0x45 @ 1 initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x2d8 @ 1 ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI motherboard resources initcall acpi_init+0x0/0x2d8 returned 0 after 41015 usecs calling dock_init+0x0/0xa5 @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0xa5 returned 0 after 976 usecs calling acpi_pci_root_init+0x0/0x2d @ 1 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x1000-0x3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xfddfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0x83ffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xf7de0000-0xf7de0fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xf7dd0000-0xf7dd00ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref] pci 0000:01:03.0: reg 14: [io 0x1000-0x10ff] pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:03.0: supports D1 D2 pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: reg 10: [io 0x1400-0x14ff] pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff] pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff] pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: reg 20: [io 0x1800-0x181f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref] pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x90000000-0xfddfffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x80000000-0x83ffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xfe000000-0xffffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x280000000-0xfcffffffff] (subtractive decode) pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0b.0: PCI bridge to [bus 02-03] pci 0000:00:0b.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0b.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0c.0: PCI bridge to [bus 04-05] pci 0000:00:0c.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0d.0: PCI bridge to [bus 06-07] pci 0000:00:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:07:04.0: reg 10: [mem 0xfdcf0000-0xfdcfffff 64bit] pci 0000:07:04.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit] pci 0000:07:04.0: PME# supported from D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: reg 10: [mem 0xfdcd0000-0xfdcdffff 64bit] pci 0000:07:04.1: reg 18: [mem 0xfdcc0000-0xfdccffff 64bit] pci 0000:07:04.1: PME# supported from D3hot D3cold pci 0000:07:04.1: PME# disabled pci 0000:06:00.0: PCI bridge to [bus 07-07] pci 0000:06:00.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:06:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:08:00.0: reg 10: [mem 0xfddf0000-0xfddf0fff 64bit] pci 0000:08:00.0: reg 18: [mem 0xfdde0000-0xfdde00ff 64bit] pci 0000:08:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:08:00.1: reg 10: [mem 0xfddd0000-0xfddd0fff 64bit] pci 0000:08:00.1: reg 18: [mem 0xfddc0000-0xfddc00ff 64bit] pci 0000:08:00.1: reg 20: [io 0x3400-0x34ff] pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: PCI bridge to [bus 08-0a] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci_root PNP0A03:01: host bridge window [io 0x4000-0xffff] (ignored) pci_root PNP0A03:01: host bridge window [mem 0xfde00000-0xfdffffff] (ignored) pci_root PNP0A03:01: host bridge window [mem 0x84000000-0x8fffffff] (ignored) pci 0000:40:01.0: reg 14: [mem 0xfdef0000-0xfdef0fff] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:40:0c.0: PCI bridge to [bus 41-43] pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:0c.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:42:08.0: reg 10: [mem 0xfdf80000-0xfdffffff 64bit] pci 0000:42:08.0: reg 18: [io 0x4000-0x40ff] pci 0000:42:08.0: reg 1c: [mem 0xfdf70000-0xfdf77fff] pci 0000:42:08.0: reg 30: [mem 0x00000000-0x00003fff pref] pci 0000:42:08.0: supports D1 pci 0000:41:00.0: PCI bridge to [bus 42-43] pci 0000:41:00.0: bridge window [io 0x4000-0x4fff] pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:41:00.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:42:04.0: PCI bridge to [bus 43-43] pci 0000:42:04.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:42:04.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:42:04.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:40:0d.0: PCI bridge to [bus 44-46] pci 0000:40:0d.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:40:0d.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:40:0e.0: PCI bridge to [bus 47-49] pci 0000:40:0e.0: bridge window [io fffffffffffff000 - 0000] reg reading pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading pci 0000:40:0e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 177734 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 27343 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling balloon_init+0x0/0x1b1 @ 1 initcall balloon_init+0x0/0x1b1 returned -19 after 0 usecs calling misc_init+0x0/0xb8 @ 1 initcall misc_init+0x0/0xb8 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x78 @ 1 vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x78 returned 0 after 1953 usecs calling cn_init+0x0/0x9e @ 1 initcall cn_init+0x0/0x9e returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 976 usecs calling ata_init+0x0/0x34e @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x34e returned 0 after 13671 usecs calling init_pcmcia_cs+0x0/0x25 @ 1 initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs calling usb_init+0x0/0x175 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x175 returned 0 after 50781 usecs calling serio_init+0x0/0x89 @ 1 initcall serio_init+0x0/0x89 returned 0 after 976 usecs calling input_init+0x0/0x132 @ 1 initcall input_init+0x0/0x132 returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling thermal_init+0x0/0x40 @ 1 initcall thermal_init+0x0/0x40 returned 0 after 0 usecs calling md_init+0x0/0xd0 @ 1 initcall md_init+0x0/0xd0 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0xdb @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f400 - 000000000009ffff reserve RAM buffer: 000000007fe50000 - 000000007fffffff reserve RAM buffer: 000000027ffff000 - 000000027fffffff initcall pci_subsys_init+0x0/0xdb returned 0 after 109375 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x177 @ 1 initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xdc @ 1 initcall pktsched_init+0x0/0xdc returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x67 @ 1 initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x83 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x83 returned 0 after 51757 usecs calling sysctl_init+0x0/0x49 @ 1 initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs calling print_ICs+0x0/0x506 @ 1 initcall print_ICs+0x0/0x506 returned 0 after 0 usecs calling hpet_late_init+0x0/0x1ed @ 1 HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter initcall hpet_late_init+0x0/0x1ed returned 0 after 52734 usecs calling clocksource_done_booting+0x0/0x36 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x36 returned 0 after 15707 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs calling tracer_init_debugfs+0x0/0x362 @ 1 initcall tracer_init_debugfs+0x0/0x362 returned 0 after 82 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs calling event_trace_init+0x0/0x1eb @ 1 initcall event_trace_init+0x0/0x1eb returned 0 after 1131 usecs calling init_kprobe_trace+0x0/0x78 @ 1 initcall init_kprobe_trace+0x0/0x78 returned 0 after 5 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 13 usecs calling eventpoll_init+0x0/0xc3 @ 1 initcall eventpoll_init+0x0/0xc3 returned 0 after 6 usecs calling anon_inode_init+0x0/0x123 @ 1 initcall anon_inode_init+0x0/0x123 returned 0 after 6 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs calling acpi_event_init+0x0/0x80 @ 1 initcall acpi_event_init+0x0/0x80 returned 0 after 10 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 54667 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: [io 0x0408-0x040f] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0700-0x073f] has been reserved system 00:01: [io 0x0800-0x08fe] has been reserved system 00:01: [io 0x0900-0x09fe] has been reserved system 00:01: [io 0x09ff] has been reserved system 00:01: [io 0x0a00-0x0afe] has been reserved system 00:01: [io 0x0aff] has been reserved system 00:01: [io 0x0b00-0x0bfe] has been reserved system 00:01: [io 0x0bff] has been reserved system 00:01: [io 0x0c80-0x0c83] has been reserved system 00:01: [io 0x0cd4-0x0cd7] has been reserved system 00:01: [io 0x0f50-0x0f58] has been reserved system 00:01: [io 0x0ca0-0x0ca1] has been reserved system 00:01: [io 0x0ca4-0x0ca5] has been reserved system 00:01: [io 0x0cf9] could not be reserved system 00:01: [io 0x03f8-0x03ff] has been reserved system 00:01: [mem 0x80000000-0x8fffffff] could not be reserved system 00:01: [mem 0xf7df0000-0xf7df0fff] could not be reserved system 00:01: [mem 0xfdef0000-0xfdef0fff] could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 386706 usecs calling chr_dev_init+0x0/0xc7 @ 1 initcall chr_dev_init+0x0/0xc7 returned 0 after 527 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 48 usecs calling init_pcmcia_bus+0x0/0x65 @ 1 initcall init_pcmcia_bus+0x0/0x65 returned 0 after 61 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs calling cpufreq_gov_dbs_init+0x0/0xaf @ 1 initcall cpufreq_gov_dbs_init+0x0/0xaf returned 0 after 253 usecs calling init_acpi_pm_clocksource+0x0/0xef @ 1 initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4425 usecs calling pcibios_assign_resources+0x0/0x76 @ 1 PCI: max bus depth: 3 pci_try_num: 4 pci 0000:00:0b.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref] pci 0000:00:0c.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref] pci 0000:00:0e.0: BAR 9: assigned [mem 0x90200000-0x902fffff pref] pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref] pci 0000:00:09.0: PCI bridge to [bus 01-01] pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7ffffff] pci 0000:00:09.0: bridge window [mem 0xe8000000-0xefffffff pref] pci 0000:02:00.0: BAR 9: assigned [mem 0x90000000-0x900fffff pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff pref] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io disabled] pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:02:00.0: bridge window [mem 0x90000000-0x900fffff pref] pci 0000:00:0b.0: PCI bridge to [bus 02-03] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:0b.0: bridge window [mem 0x90000000-0x900fffff pref] pci 0000:04:00.0: BAR 9: assigned [mem 0x90100000-0x901fffff pref] pci 0000:05:00.0: BAR 6: assigned [mem 0x90100000-0x9011ffff pref] pci 0000:04:00.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: bridge window [io disabled] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:04:00.0: bridge window [mem 0x90100000-0x901fffff pref] pci 0000:00:0c.0: PCI bridge to [bus 04-05] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:0c.0: bridge window [mem 0x90100000-0x901fffff pref] pci 0000:06:00.0: PCI bridge to [bus 07-07] pci 0000:06:00.0: bridge window [io disabled] pci 0000:06:00.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:06:00.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 06-07] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:08:00.0: BAR 6: assigned [mem 0x90200000-0x9023ffff pref] pci 0000:08:00.1: BAR 6: assigned [mem 0x90240000-0x9027ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 08-0a] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:0e.0: bridge window [mem 0x90200000-0x902fffff pref] pci 0000:40:0c.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref] pci 0000:41:00.0: BAR 9: assigned [mem 0x84000000-0x840fffff pref] pci 0000:42:08.0: BAR 6: assigned [mem 0x84000000-0x84003fff pref] pci 0000:42:04.0: PCI bridge to [bus 43-43] pci 0000:42:04.0: bridge window [io disabled] pci 0000:42:04.0: bridge window [mem disabled] pci 0000:42:04.0: bridge window [mem pref disabled] pci 0000:41:00.0: PCI bridge to [bus 42-43] pci 0000:41:00.0: bridge window [io 0x4000-0x4fff] pci 0000:41:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:41:00.0: bridge window [mem 0x84000000-0x840fffff pref] pci 0000:40:0c.0: PCI bridge to [bus 41-43] pci 0000:40:0c.0: bridge window [io 0x4000-0x4fff] pci 0000:40:0c.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:0c.0: bridge window [mem 0x84000000-0x840fffff pref] pci 0000:40:0d.0: PCI bridge to [bus 44-46] pci 0000:40:0d.0: bridge window [io disabled] pci 0000:40:0d.0: bridge window [mem disabled] pci 0000:40:0d.0: bridge window [mem pref disabled] pci 0000:40:0e.0: PCI bridge to [bus 47-49] pci 0000:40:0e.0: bridge window [io disabled] pci 0000:40:0e.0: bridge window [mem disabled] pci 0000:40:0e.0: bridge window [mem pref disabled] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:40:0c.0: setting latency timer to 64 pci 0000:41:00.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x3fff] pci_bus 0000:00: resource 5 [mem 0x90000000-0xfddfffff] pci_bus 0000:00: resource 6 [mem 0x80000000-0x83ffffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x280000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref] pci_bus 0000:01: resource 4 [io 0x0000-0x3fff] pci_bus 0000:01: resource 5 [mem 0x90000000-0xfddfffff] pci_bus 0000:01: resource 6 [mem 0x80000000-0x83ffffff] pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 8 [mem 0xfe000000-0xffffffff] pci_bus 0000:01: resource 9 [mem 0x280000000-0xfcffffffff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff pref] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff pref] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0x90100000-0x901fffff pref] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:05: resource 2 [mem 0x90100000-0x901fffff pref] pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] pci_bus 0000:08: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:08: resource 2 [mem 0x90200000-0x902fffff pref] pci_bus 0000:40: resource 4 [io 0x4000-0xffff] pci_bus 0000:40: resource 5 [mem 0xfde00000-0xfdffffff] pci_bus 0000:40: resource 6 [mem 0x84000000-0x8fffffff] pci_bus 0000:41: resource 0 [io 0x4000-0x4fff] pci_bus 0000:41: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:41: resource 2 [mem 0x84000000-0x840fffff pref] pci_bus 0000:42: resource 0 [io 0x4000-0x4fff] pci_bus 0000:42: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:42: resource 2 [mem 0x84000000-0x840fffff pref] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2256839 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 8 usecs calling inet_init+0x0/0x204 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) initcall inet_init+0x0/0x204 returned 0 after 148847 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 17666 usecs calling pci_apply_final_quirks+0x0/0xef @ 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping PCI: CLS 64 bytes, default 64 initcall pci_apply_final_quirks+0x0/0xef returned 0 after 238159 usecs calling populate_rootfs+0x0/0x237 @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2531k freed initcall populate_rootfs+0x0/0x237 returned 0 after 78742 usecs calling pci_iommu_init+0x0/0x31 @ 1 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture initcall pci_iommu_init+0x0/0x31 returned 0 after 72668 usecs calling calgary_fixup_tce_spaces+0x0/0xee @ 1 initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 141 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 13 usecs calling sbf_init+0x0/0xd7 @ 1 initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 106 usecs calling add_rtc_cmos+0x0/0xa4 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0xa4 returned 0 after 24157 usecs calling cache_sysfs_init+0x0/0x59 @ 1 initcall cache_sysfs_init+0x0/0x59 returned 0 after 933 usecs calling mcheck_init_device+0x0/0xf2 @ 1 initcall mcheck_init_device+0x0/0xf2 returned 0 after 360 usecs calling threshold_init_device+0x0/0x44 @ 1 initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs calling thermal_throttle_init_device+0x0/0x89 @ 1 initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs calling msr_init+0x0/0x10b @ 1 initcall msr_init+0x0/0x10b returned 0 after 306 usecs calling cpuid_init+0x0/0x10b @ 1 initcall cpuid_init+0x0/0x10b returned 0 after 293 usecs calling ioapic_init_sysfs+0x0/0x99 @ 1 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 155 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 62 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 6 usecs calling init_vdso_vars+0x0/0x19d @ 1 initcall init_vdso_vars+0x0/0x19d returned 0 after 15 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs calling sysenter_setup+0x0/0x2cc @ 1 initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs calling init_sched_debug_procfs+0x0/0x29 @ 1 initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 7 usecs calling proc_schedstat_init+0x0/0x1f @ 1 initcall proc_schedstat_init+0x0/0x1f returned 0 after 1 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs calling ioresources_init+0x0/0x36 @ 1 initcall ioresources_init+0x0/0x36 returned 0 after 3 usecs calling uid_cache_init+0x0/0x6e @ 1 initcall uid_cache_init+0x0/0x6e returned 0 after 8 usecs calling init_posix_timers+0x0/0x1b5 @ 1 initcall init_posix_timers+0x0/0x1b5 returned 0 after 2 usecs calling init_posix_cpu_timers+0x0/0x101 @ 1 initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 1 usecs calling create_proc_profile+0x0/0x236 @ 1 initcall create_proc_profile+0x0/0x236 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 107 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 105 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs calling futex_init+0x0/0x63 @ 1 initcall futex_init+0x0/0x63 returned 0 after 10 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 1 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 61 usecs calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs calling crash_notes_memory_init+0x0/0x36 @ 1 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs calling pid_namespaces_init+0x0/0x2d @ 1 initcall pid_namespaces_init+0x0/0x2d returned 0 after 6 usecs calling ikconfig_init+0x0/0x39 @ 1 initcall ikconfig_init+0x0/0x39 returned 0 after 2 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1268069973.149:1): initialized initcall audit_init+0x0/0x133 returned 0 after 38868 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs calling init_kprobes+0x0/0x182 @ 1 initcall init_kprobes+0x0/0x182 returned 0 after 16016 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 38 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs calling init_tracepoints+0x0/0x12 @ 1 initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 3 usecs calling init_events+0x0/0x5f @ 1 initcall init_events+0x0/0x5f returned 0 after 2 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 2 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs calling init_irqsoff_tracer+0x0/0x14 @ 1 initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs calling init_blk_tracer+0x0/0x57 @ 1 initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 8 usecs calling init_per_zone_wmark_min+0x0/0x70 @ 1 initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 486 usecs calling kswapd_init+0x0/0x4d @ 1 initcall kswapd_init+0x0/0x4d returned 0 after 77 usecs calling setup_vmstat+0x0/0xae @ 1 initcall setup_vmstat+0x0/0xae returned 0 after 13 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 4 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs calling hugetlb_init+0x0/0x329 @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x329 returned 0 after 27417 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs calling slab_sysfs_init+0x0/0xf0 @ 1 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 3458 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 4 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 3 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 8 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0x70 @ 1 initcall inotify_user_setup+0x0/0x70 returned 0 after 6 usecs calling aio_setup+0x0/0x9e @ 1 initcall aio_setup+0x0/0x9e returned 0 after 141 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs calling init_sys32_ioctl+0x0/0x28 @ 1 initcall init_sys32_ioctl+0x0/0x28 returned 0 after 73 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs calling dquot_init+0x0/0xe0 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xe0 returned 0 after 43189 usecs calling init_v2_quota_format+0x0/0x22 @ 1 initcall init_v2_quota_format+0x0/0x22 returned 0 after 1 usecs calling quota_init+0x0/0x26 @ 1 initcall quota_init+0x0/0x26 returned 0 after 29 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 13 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 2 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs calling proc_kcore_init+0x0/0xa9 @ 1 initcall proc_kcore_init+0x0/0xa9 returned 0 after 8 usecs calling vmcore_init+0x0/0x8e2 @ 1 initcall vmcore_init+0x0/0x8e2 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs calling proc_page_init+0x0/0x3c @ 1 initcall proc_page_init+0x0/0x3c returned 0 after 3 usecs calling init_devpts_fs+0x0/0x4d @ 1 initcall init_devpts_fs+0x0/0x4d returned 0 after 18 usecs calling init_ext3_fs+0x0/0x6b @ 1 initcall init_ext3_fs+0x0/0x6b returned 0 after 158 usecs calling journal_init+0x0/0x99 @ 1 initcall journal_init+0x0/0x99 returned 0 after 297 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 92 usecs calling init_iso9660_fs+0x0/0x6c @ 1 initcall init_iso9660_fs+0x0/0x6c returned 0 after 95 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 16001 initcall ipc_init+0x0/0x23 returned 0 after 14659 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 1 usecs calling init_mqueue_fs+0x0/0xb4 @ 1 initcall init_mqueue_fs+0x0/0xb4 returned 0 after 97 usecs calling key_proc_init+0x0/0x53 @ 1 initcall key_proc_init+0x0/0x53 returned 0 after 4 usecs calling selinux_nf_ip_init+0x0/0x60 @ 1 initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs calling init_sel_fs+0x0/0x69 @ 1 initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 5 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs calling sel_netnode_init+0x0/0x72 @ 1 initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs calling sel_netport_init+0x0/0x72 @ 1 initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 1 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 125 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs calling skcipher_module_init+0x0/0x34 @ 1 initcall skcipher_module_init+0x0/0x34 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 78 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 51 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 14957 usecs calling proc_genhd_init+0x0/0x36 @ 1 initcall proc_genhd_init+0x0/0x36 returned 0 after 3 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) initcall bsg_init+0x0/0x12e returned 0 after 33237 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 13683 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 15511 usecs calling cfq_init+0x0/0x94 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x94 returned 0 after 19511 usecs calling percpu_counter_startup+0x0/0x19 @ 1 initcall percpu_counter_startup+0x0/0x19 returned 0 after 2 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 97 usecs calling pcie_portdrv_init+0x0/0x58 @ 1 pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X pcieport 0000:00:0e.0: setting latency timer to 64 pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X pcieport 0000:40:0c.0: setting latency timer to 64 pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X pcieport 0000:40:0d.0: setting latency timer to 64 pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X pcieport 0000:40:0e.0: setting latency timer to 64 pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X initcall pcie_portdrv_init+0x0/0x58 returned 0 after 308716 usecs calling aer_service_init+0x0/0x2b @ 1 aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support initcall aer_service_init+0x0/0x2b returned 0 after 259826 usecs calling ioapic_init+0x0/0x1b @ 1 initcall ioapic_init+0x0/0x1b returned 0 after 60 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 24101 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5f returned -19 after 29492 usecs calling fb_console_init+0x0/0x12a @ 1 initcall fb_console_init+0x0/0x12a returned 0 after 87 usecs calling genericbl_init+0x0/0x12 @ 1 initcall genericbl_init+0x0/0x12 returned 0 after 59 usecs calling xenfb_init+0x0/0x44 @ 1 initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs calling vesafb_init+0x0/0x235 @ 1 initcall vesafb_init+0x0/0x235 returned 0 after 119 usecs calling efifb_init+0x0/0x1f2 @ 1 initcall efifb_init+0x0/0x1f2 returned -19 after 3 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 3 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 104 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 35233 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 60 usecs calling acpi_processor_init+0x0/0x10a @ 1 initcall acpi_processor_init+0x0/0x10a returned 0 after 645 usecs calling acpi_container_init+0x0/0x4a @ 1 initcall acpi_container_init+0x0/0x4a returned 0 after 998 usecs calling acpi_thermal_init+0x0/0x7b @ 1 initcall acpi_thermal_init+0x0/0x7b returned 0 after 74 usecs calling evtchn_init+0x0/0x61 @ 1 initcall evtchn_init+0x0/0x61 returned -19 after 0 usecs calling xenfs_init+0x0/0x2d @ 1 XENFS: not registering filesystem on non-xen platform initcall xenfs_init+0x0/0x2d returned 0 after 25967 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xb3 @ 1 initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs calling rand_initialize+0x0/0x2c @ 1 initcall rand_initialize+0x0/0x2c returned 0 after 15 usecs calling tty_init+0x0/0xf5 @ 1 initcall tty_init+0x0/0xf5 returned 0 after 4223 usecs calling pty_init+0x0/0x284 @ 1 initcall pty_init+0x0/0x284 returned 0 after 84 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 120 usecs calling xen_init+0x0/0x78 @ 1 initcall xen_init+0x0/0x78 returned -19 after 0 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 122 usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned 0 after 197 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 16595 usecs calling mod_init+0x0/0x4d @ 1 initcall mod_init+0x0/0x4d returned -19 after 0 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 15216 usecs calling agp_amd64_mod_init+0x0/0x22 @ 1 initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs calling agp_intel_init+0x0/0x29 @ 1 initcall agp_intel_init+0x0/0x29 returned 0 after 78 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 65 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 66 usecs calling drm_core_init+0x0/0x124 @ 1 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x124 returned 0 after 18582 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs calling serial8250_init+0x0/0x161 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_init+0x0/0x161 returned 0 after 643832 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 2698 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 117 usecs calling init_kgdboc+0x0/0x16 @ 1 initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs calling topology_sysfs_init+0x0/0x4e @ 1 initcall topology_sysfs_init+0x0/0x4e returned 0 after 17 usecs calling brd_init+0x0/0x160 @ 1 brd: module loaded initcall brd_init+0x0/0x160 returned 0 after 11946 usecs calling loop_init+0x0/0x189 @ 1 loop: module loaded initcall loop_init+0x0/0x189 returned 0 after 3523 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs calling mac_hid_init+0x0/0x22 @ 1 initcall mac_hid_init+0x0/0x22 returned 0 after 3 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs calling init_sd+0x0/0x181 @ 1 initcall init_sd+0x0/0x181 returned 0 after 126 usecs calling init_sr+0x0/0x49 @ 1 initcall init_sr+0x0/0x49 returned 0 after 56 usecs calling init_sg+0x0/0x122 @ 1 initcall init_sg+0x0/0x122 returned 0 after 68 usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after 111 usecs calling bnx2_init+0x0/0x1b @ 1 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8 (Feb 15, 2010) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j6.fw bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 initcall bnx2_init+0x0/0x1b returned 0 after 434831 usecs calling net_olddevs_init+0x0/0xa0 @ 1 initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs calling init_netconsole+0x0/0x1dd @ 1 netconsole: local port 56816 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 56816 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2 0000:03:00.0: irq 69 for MSI/MSI-X bnx2 0000:03:00.0: eth0: using MSI bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex netconsole: carrier detect appears untrustworthy, waiting 4 seconds , receive & transmit flow control ON bnx2 0000:03:00.0: eth0: NIC SerDes Link is Down bnx2 0000:03:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON Clocksource tsc unstable (delta = 4398045025043 ns) console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1dd returned 0 after 32370847 usecs calling cdrom_init+0x0/0xd @ 1 initcall cdrom_init+0x0/0xd returned 0 after 19 usecs calling mon_init+0x0/0x103 @ 1 initcall mon_init+0x0/0x103 returned 0 after 201 usecs calling i8042_init+0x0/0x3f9 @ 1 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3f9 returned 0 after 58352 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 0 usecs calling mousedev_init+0x0/0x61 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x61 returned 0 after 21491 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 72 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 67 usecs calling psmouse_init+0x0/0x7a @ 1 initcall psmouse_init+0x0/0x7a returned 0 after 117 usecs calling xenkbd_init+0x0/0x44 @ 1 initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs calling cmos_init+0x0/0x6d @ 1 rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs initcall cmos_init+0x0/0x6d returned 0 after 77274 usecs calling dm_init+0x0/0x49 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x49 returned 0 after 57655 usecs calling cpufreq_gov_powersave_init+0x0/0x12 @ 1 initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 1 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs calling cpufreq_gov_dbs_init+0x0/0x64 @ 1 initcall cpufreq_gov_dbs_init+0x0/0x64 returned 0 after 124 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 14217 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 13709 usecs calling efivars_init+0x0/0x1f9 @ 1 initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 118 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 51 usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after 52 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 48 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 48 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 48 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 48 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 49 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 48 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 52 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 49 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 49 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 76 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 61 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 50 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 48 usecs calling ortek_init+0x0/0x1b @ 1 initcall ortek_init+0x0/0x1b returned 0 after 48 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 49 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 48 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 49 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 49 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 57 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 49 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 49 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 48 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 49 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 49 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 49 usecs calling hid_init+0x0/0xc7 @ 1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0xc7 returned 0 after 50503 usecs calling flow_cache_init+0x0/0x187 @ 1 initcall flow_cache_init+0x0/0x187 returned 0 after 25 usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after 1 usecs calling snap_init+0x0/0x38 @ 1 initcall snap_init+0x0/0x38 returned 0 after 2 usecs calling rif_init+0x0/0x84 @ 1 initcall rif_init+0x0/0x84 returned 0 after 13 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 94749 usecs calling xt_init+0x0/0x129 @ 1 initcall xt_init+0x0/0x129 returned 0 after 11 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after 1 usecs calling state_mt_init+0x0/0x17 @ 1 initcall state_mt_init+0x0/0x17 returned 0 after 3 usecs calling sysctl_ipv4_init+0x0/0x4e @ 1 initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 12 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 25 usecs calling ipv4_netfilter_init+0x0/0x12 @ 1 initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 1 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 11 usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs calling ip_tables_init+0x0/0xaf @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xaf returned 0 after 21691 usecs calling iptable_filter_init+0x0/0x6f @ 1 initcall iptable_filter_init+0x0/0x6f returned 0 after 16 usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs calling cubictcp_register+0x0/0x6e @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x6e returned 0 after 7141 usecs calling xfrm_user_init+0x0/0x4d @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4d returned 0 after 15745 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 16582 usecs calling mcheck_debugfs_init+0x0/0x3b @ 1 initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 5 usecs calling severities_debugfs_init+0x0/0x3b @ 1 initcall severities_debugfs_init+0x0/0x3b returned 0 after 2 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs calling update_mp_table+0x0/0x470 @ 1 initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x40 @ 1 initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 103 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x32 @ 1 initcall pat_memtype_list_init+0x0/0x32 returned 0 after 13 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs calling init_oops_id+0x0/0x31 @ 1 initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 initcall pm_qos_power_init+0x0/0x61 returned 0 after 188 usecs calling software_resume+0x0/0x1ec @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1ec returned -2 after 4565 usecs initcall software_resume+0x0/0x1ec returned with error code -2 calling debugfs_kprobe_init+0x0/0x89 @ 1 initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 5 usecs calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 15643 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling random32_reseed+0x0/0x92 @ 1 initcall random32_reseed+0x0/0x92 returned 0 after 15 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs calling pci_sysfs_init+0x0/0x4c @ 1 initcall pci_sysfs_init+0x0/0x4c returned 0 after 355 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 9 usecs calling late_resume_init+0x0/0xf4 @ 1 Magic number: 2:517:693 initcall late_resume_init+0x0/0xf4 returned 0 after 13006 usecs calling scsi_complete_async_scans+0x0/0xf7 @ 1 initcall scsi_complete_async_scans+0x0/0xf7 returned 0 after 0 usecs calling memmap_init+0x0/0x3b @ 1 initcall memmap_init+0x0/0x3b returned 0 after 36 usecs calling pci_mmcfg_late_insert_resources+0x0/0x66 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x66 returned 0 after 1 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs async_waiting @ 1 async_continuing @ 1 after 0 usec Freeing unused kernel memory: 1292k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 232k freed Freeing unused kernel memory: 1920k freed calling ehci_hcd_init+0x0/0x76 [ehci_hcd] @ 742 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected initcall ehci_hcd_init+0x0/0x76 [ehci_hcd] returned 0 after 361402 usecs calling ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 744 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34-rc1 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 323034 usecs calling uhci_hcd_init+0x0/0xc6 [uhci_hcd] @ 746 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34-rc1 uhci_hcd usb usb3: SerialNumber: 0000:01:04.4 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected initcall uhci_hcd_init+0x0/0xc6 [uhci_hcd] returned 0 after 294058 usecs calling cciss_init+0x0/0xa4 [cciss] @ 748 HP CISS Driver (v 3.6.20) cciss: using PCI PM to reset controller usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Virtual Keyboard usb 3-1: Manufacturer: HP input: HP Virtual Keyboard as /class/input/input1 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /class/input/input2 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 usb 3-2: new full speed USB device using uhci_hcd and address 3 hub 3-0:1.0: unable to enumerate USB device on port 2 usb 3-2: new full speed USB device using uhci_hcd and address 4 usb 3-2: New USB device found, idVendor=03f0, idProduct=1327 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Virtual Hub usb 3-2: Manufacturer: HP hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected cciss: controller message 03:00 succeeded ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54 cciss 0000:42:08.0: irq 70 for MSI/MSI-X IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 > cciss/c0d1: p1 p2 initcall cciss_init+0x0/0xa4 [cciss] returned 0 after 2187796 usecs calling shpcd_init+0x0/0x68 [shpchp] @ 775 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 41468 usecs calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 781 initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 202 usecs calling fc_transport_init+0x0/0x85 [scsi_transport_fc] @ 786 initcall fc_transport_init+0x0/0x85 [scsi_transport_fc] returned 0 after 30 usecs calling lpfc_init+0x0/0xd3 [lpfc] @ 787 Emulex LightPulse Fibre Channel SCSI driver 8.3.9 Copyright(c) 2004-2009 Emulex. All rights reserved. ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 lpfc 0000:08:00.0: setting latency timer to 64 scsi0 : on PCI bus 08 device 00 irq 18 lpfc 0000:08:00.0: irq 71 for MSI/MSI-X ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: setting latency timer to 64 scsi1 : on PCI bus 08 device 01 irq 19 lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 lpfc 0000:08:00.1: irq 72 for MSI/MSI-X scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:0:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:0:8: Attached scsi generic sg1 type 0 sd 0:0:0:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) sd 0:0:0:8: [sda] Write Protect is off sd 0:0:0:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:0:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 scsi 0:0:1:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 sd 0:0:0:8: [sda] Attached SCSI disk scsi 0:0:1:0: Attached scsi generic sg2 type 13 scsi 0:0:2:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:2:0: Attached scsi generic sg3 type 12 initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 4307265 usecs calling usb_stor_init+0x0/0x4b [usb_storage] @ 801 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x4b [usb_storage] returned 0 after 48122 usecs lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg4 type 12 scsi 1:0:0:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:0:8: Attached scsi generic sg5 type 0 sd 1:0:0:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) scsi 1:0:1:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 scsi 1:0:1:0: Attached scsi generic sg6 type 13 scsi 1:0:2:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:2:0: Attached scsi generic sg7 type 12 sd 1:0:0:8: [sdb] Write Protect is off sd 1:0:0:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:0:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:8: [sdb] Attached SCSI disk calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 803 initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 1 usecs kjournald starting. Commit interval 5 seconds EXT3-fs (cciss/c0d0p3): mounted filesystem with writeback data mode calling pcspkr_init+0x0/0x12 [pcspkr] @ 1052 input: PC Speaker as /class/input/input3 initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 85596 usecs calling hwmon_init+0x0/0x112 [hwmon] @ 1069 initcall hwmon_init+0x0/0x112 [hwmon] returned 0 after 399 usecs calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 1052 initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 515 usecs calling k8temp_init+0x0/0x20 [k8temp] @ 1073 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1463 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 56 usecs calling init_tis+0x0/0x92 [tpm_tis] @ 1121 initcall init_tis+0x0/0x92 [tpm_tis] returned 0 after 22 usecs calling init_ipmi_si+0x0/0x793 [ipmi_si] @ 1463 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 calling serio_raw_init+0x0/0x20 [serio_raw] @ 1442 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 22 usecs ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface calling floppy_module_init+0x0/0xd6d [floppy] @ 1526 Floppy drive(s): fd0 is 1.44M calling init_ipmi_devintf+0x0/0x106 [ipmi_devintf] @ 1795 ipmi device interface initcall init_ipmi_devintf+0x0/0x106 [ipmi_devintf] returned 0 after 73 usecs calling init_soundcore+0x0/0x8b [soundcore] @ 1052 initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 18 usecs calling alsa_sound_init+0x0/0x8f [snd] @ 1052 initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 31 usecs calling alsa_timer_init+0x0/0x187 [snd_timer] @ 1052 initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 62 usecs calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 1893 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 7 usecs calling phy_init+0x0/0x31 [libphy] @ 1891 initcall phy_init+0x0/0x31 [libphy] returned 0 after 49 usecs calling enclosure_init+0x0/0x19 [enclosure] @ 1934 initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 14 usecs calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 1928 initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 0 usecs calling alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] @ 1928 initcall alsa_pcm_oss_init+0x0/0xa1 [snd_pcm_oss] returned 0 after 1 usecs calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 2003 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 6 usecs calling alsa_seq_init+0x0/0x57 [snd_seq] @ 2009 initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 499 usecs calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 2009 initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 2009 calling ses_init+0x0/0x40 [ses] @ 1934 ses 0:0:1:0: Attached Enclosure device ses 1:0:1:0: Attached Enclosure device initcall ses_init+0x0/0x40 [ses] returned 0 after 60 usecs calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 2073 initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 12 usecs calling tg3_init+0x0/0x20 [tg3] @ 1990 initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 143962 usecs calling pcsp_init+0x0/0x20 [snd_pcsp] @ 1052 Error: Driver 'pcspkr' is already registered, aborting... initcall pcsp_init+0x0/0x20 [snd_pcsp] returned -16 after 4 usecs initcall pcsp_init+0x0/0x20 [snd_pcsp] returned with error code -16 ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 tg3.c:v3.108 (February 17, 2010) tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 ipmi_si: duplicate interface k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 tg3 0000:07:04.0: eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f tg3 0000:07:04.0: eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0]) tg3 0000:07:04.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:07:04.0: eth2: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 1778901 usecs tg3 0000:07:04.1: eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30 tg3 0000:07:04.1: eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0]) tg3 0000:07:04.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:07:04.1: eth3: dma_rwctrl[76148000] dma_mask[40-bit] initcall tg3_init+0x0/0x20 [tg3] returned 0 after 833093 usecs ipmi_si: probe of 00:02 failed with error -16 ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized initcall init_ipmi_si+0x0/0x793 [ipmi_si] returned 0 after 2209269 usecs floppy0: no floppy controllers found initcall floppy_module_init+0x0/0xd6d [floppy] returned -19 after 2947700 usecs calling floppy_module_init+0x0/0xd6d [floppy] @ 3147 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found initcall floppy_module_init+0x0/0xd6d [floppy] returned -19 after 2959240 usecs calling parport_default_proc_register+0x0/0x1b [parport] @ 3155 initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 9 usecs calling lp_init_module+0x0/0x274 [lp] @ 3158 calling parport_pc_init+0x0/0x357 [parport_pc] @ 3161 initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 276 usecs lp: driver loaded but no devices found initcall lp_init_module+0x0/0x274 [lp] returned 0 after 44770 usecs calling acpi_ac_init+0x0/0x45 [ac] @ 3191 initcall acpi_ac_init+0x0/0x45 [ac] returned 0 after 59 usecs calling acpi_battery_init+0x0/0x16 [battery] @ 3197 initcall acpi_battery_init+0x0/0x16 [battery] returned 0 after 5 usecs calling acpi_pci_slot_init+0x0/0x20 [pci_slot] @ 3206 initcall acpi_pci_slot_init+0x0/0x20 [pci_slot] returned 0 after 354 usecs calling acpi_smb_hc_init+0x0/0x18 [sbshc] @ 3210 initcall acpi_smb_hc_init+0x0/0x18 [sbshc] returned 0 after 45 usecs calling acpi_sbs_init+0x0/0x4f [sbs] @ 3216 initcall acpi_sbs_init+0x0/0x4f [sbs] returned 0 after 47 usecs calling video_output_class_init+0x0/0x19 [output] @ 3219 initcall video_output_class_init+0x0/0x19 [output] returned 0 after 19 usecs calling acpi_video_init+0x0/0x70 [video] @ 3219 initcall acpi_video_init+0x0/0x70 [video] returned 0 after 96 usecs md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. calling dm_multipath_init+0x0/0x127 [dm_multipath] @ 3238 device-mapper: multipath: version 1.1.1 loaded initcall dm_multipath_init+0x0/0x127 [dm_multipath] returned 0 after 15937 usecs calling dm_mirror_init+0x0/0x79 [dm_mirror] @ 3250 initcall dm_mirror_init+0x0/0x79 [dm_mirror] returned 0 after 66 usecs EXT3-fs (cciss/c0d0p3): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (cciss/c0d1p1): using internal journal EXT3-fs (cciss/c0d1p1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (cciss/c0d1p2): using internal journal EXT3-fs (cciss/c0d1p2): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (cciss/c0d0p1): using internal journal EXT3-fs (cciss/c0d0p1): mounted filesystem with writeback data mode Adding 8008364k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:8008364k warning: process `kudzu' used the deprecated sysctl system call with 1.23. calling powernowk8_init+0x0/0xa7 [powernow_k8] @ 3407 powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 initcall powernowk8_init+0x0/0xa7 [powernow_k8] returned 0 after 255604 usecs calling inet6_init+0x0/0x2b2 [ipv6] @ 3432 NET: Registered protocol family 10 lo: Disabled Privacy Extensions initcall inet6_init+0x0/0x2b2 [ipv6] returned 0 after 14123 usecs calling ip6_tables_init+0x0/0xaf [ip6_tables] @ 3446 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xaf [ip6_tables] returned 0 after 4382 usecs calling ip6table_filter_init+0x0/0x6f [ip6table_filter] @ 3455 initcall ip6table_filter_init+0x0/0x6f [ip6table_filter] returned 0 after 35 usecs calling reject_tg6_init+0x0/0x12 [ip6t_REJECT] @ 3458 initcall reject_tg6_init+0x0/0x12 [ip6t_REJECT] returned 0 after 2 usecs calling nf_conntrack_netbios_ns_init+0x0/0x1e [nf_conntrack_netbios_ns] @ 3492 initcall nf_conntrack_netbios_ns_init+0x0/0x1e [nf_conntrack_netbios_ns] returned 0 after 2 usecs calling init_sunrpc+0x0/0x5d [sunrpc] @ 4036 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 26862 usecs calling init_nlm+0x0/0x22 [lockd] @ 4034 initcall init_nlm+0x0/0x22 [lockd] returned 0 after 14 usecs warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) calling rfkill_init+0x0/0x7a [rfkill] @ 4116 initcall rfkill_init+0x0/0x7a [rfkill] returned 0 after 136 usecs calling bt_init+0x0/0x5d [bluetooth] @ 4116 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x5d [bluetooth] returned 0 after 37453 usecs calling l2cap_init+0x0/0xe4 [l2cap] @ 4138 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized initcall l2cap_init+0x0/0xe4 [l2cap] returned 0 after 4435 usecs calling rfcomm_init+0x0/0xd5 [rfcomm] @ 4136 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 initcall rfcomm_init+0x0/0xd5 [rfcomm] returned 0 after 28358 usecs calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 4165 initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 30 usecs calling init_nfs_fs+0x0/0x125 [nfs] @ 4165 initcall init_nfs_fs+0x0/0x125 [nfs] returned 0 after 572 usecs svc: failed to register lockdv1 RPC service (errno 97). eth0: no IPv6 routers present calling hidp_init+0x0/0x60 [hidp] @ 4281 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 initcall hidp_init+0x0/0x60 [hidp] returned 0 after 16003 usecs calling init_autofs4_fs+0x0/0x26 [autofs4] @ 4297 initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 117 usecs rport-0:0-19: blocked FC remote port time out: removing rport rport-1:0-20: blocked FC remote port time out: removing rport