| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4BA40D9E.80507@coyote.org>
Date: Sat, 20 Mar 2010 00:49:50 +0100
From: Lars Lindley <lindley@...ote.org>
To: Lars Lindley <lindley@...ote.org>
CC: gregkh@...e.de, greg@...ah.com, penberg@...helsinki.fi,
pavel@....cz, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] staging: winbond: mto.c Coding style fixes
I confirmed that it was only the initializations that changed the .o file.
When I put them back the .o was identical to the one from a clean tree.
It seems like I didn't mess up the ifs anyways.. ;)
/Lars
On 2010-03-20 00:26, Lars Lindley wrote:
> I changed all things reported by checkpatch.pl except some long lines
> and the use of externs in a .c file. I also removed revision comments
> and "commented out" code.
> Please review this closely as the generated .o differs from the
> mainline one but I suspect that is because I removed the explicit
> initialization to 0 in a couple of statics..
> There are also some very deep if-if-else-if-ifs that I might have messed
> up :)
>
> Signed-off-by: Lars Lindley <lindley@...ote.org>
> ---
> drivers/staging/winbond/mto.c | 299 ++++++++++++++++++-----------------------
> 1 files changed, 129 insertions(+), 170 deletions(-)
>
> diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
> index 5e7fa1c..9cd2127 100644
> --- a/drivers/staging/winbond/mto.c
> +++ b/drivers/staging/winbond/mto.c
> @@ -1,222 +1,181 @@
> -//============================================================================
> -// MTO.C -
> -//
> -// Description:
> -// MAC Throughput Optimization for W89C33 802.11g WLAN STA.
> -//
> -// The following MIB attributes or internal variables will be affected
> -// while the MTO is being executed:
> -// dot11FragmentationThreshold,
> -// dot11RTSThreshold,
> -// transmission rate and PLCP preamble type,
> -// CCA mode,
> -// antenna diversity.
> -//
> -// Revision history:
> -// --------------------------------------------------------------------------
> -// 20031227 UN20 Pete Chao
> -// First draft
> -// 20031229 Turbo copy from PD43
> -// 20040210 Kevin revised
> -// Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
> -//============================================================================
> -
> -// LA20040210_DTO kevin
> +/*
> + * ============================================================================
> + * MTO.C -
> + *
> + * Description:
> + * MAC Throughput Optimization for W89C33 802.11g WLAN STA.
> + *
> + * The following MIB attributes or internal variables will be affected
> + * while the MTO is being executed:
> + * dot11FragmentationThreshold,
> + * dot11RTSThreshold,
> + * transmission rate and PLCP preamble type,
> + * CCA mode,
> + * antenna diversity.
> + *
> + * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
> + * ============================================================================
> + */
> +
> #include "sysdef.h"
> #include "sme_api.h"
> #include "wbhal_f.h"
>
> -// Declare SQ3 to rate and fragmentation threshold table
> -// Declare fragmentation thresholds table
> -#define MTO_MAX_FRAG_TH_LEVELS 5
> -#define MTO_MAX_DATA_RATE_LEVELS 12
> +/* Declare SQ3 to rate and fragmentation threshold table */
> +/* Declare fragmentation thresholds table */
> +#define MTO_MAX_FRAG_TH_LEVELS 5
> +#define MTO_MAX_DATA_RATE_LEVELS 12
>
> -u16 MTO_Frag_Th_Tbl[MTO_MAX_FRAG_TH_LEVELS] =
> -{
> - 256, 384, 512, 768, 1536
> +u16 MTO_Frag_Th_Tbl[MTO_MAX_FRAG_TH_LEVELS] = {
> + 256, 384, 512, 768, 1536
> };
>
> -// Declare data rate table
> -//The following table will be changed at anytime if the opration rate supported by AP don't
> -//match the table
> +/*
> + * Declare data rate table:
> + * The following table will be changed at anytime if the opration rate
> + * supported by AP don't match the table
> + */
> static u8 MTO_Data_Rate_Tbl[MTO_MAX_DATA_RATE_LEVELS] = {
> - 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108
> + 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108
> };
>
> -static int TotalTxPkt = 0;
> -static int TotalTxPktRetry = 0;
> -static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];//this record the retry rate at different data rate
> +static int TotalTxPkt;
> +static int TotalTxPktRetry;
> +/* this record the retry rate at different data rate */
> +static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];
>
> -static int PeriodTotalTxPkt = 0;
> -static int PeriodTotalTxPktRetry = 0;
> +static int PeriodTotalTxPkt;
> +static int PeriodTotalTxPktRetry;
>
> -static u8 boSparseTxTraffic = false;
> +static u8 boSparseTxTraffic;
>
> void MTO_Init(struct wbsoft_priv *adapter);
> void TxRateReductionCtrl(struct wbsoft_priv *adapter);
> -/** 1.1.31.1000 Turbo modify */
> void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
> void MTO_TxFailed(struct wbsoft_priv *adapter);
> void hal_get_dto_para(struct wbsoft_priv *adapter, char *buffer);
>
> -//===========================================================================
> -// MTO_Init --
> -//
> -// Description:
> -// Initialize MTO parameters.
> -//
> -// This function should be invoked during system initialization.
> -//
> -// Arguments:
> -// adapter - The pointer to the Miniport adapter Context
> -//
> -// Return Value:
> -// None
> -//============================================================================
> +/*
> + * ===========================================================================
> + * MTO_Init --
> + *
> + * Description:
> + * Initialize MTO parameters.
> + *
> + * This function should be invoked during system initialization.
> + *
> + * Arguments:
> + * adapter - The pointer to the Miniport adapter Context
> + * ===========================================================================
> + */
> void MTO_Init(struct wbsoft_priv *adapter)
> {
> - int i;
> -
> - //[WKCHEN]MTO_CCA_MODE_SETUP()= (u8) hal_get_cca_mode(MTO_HAL());
> - //[WKCHEN]MTO_CCA_MODE() = MTO_CCA_MODE_SETUP();
> -
> - //MTO_PREAMBLE_TYPE() = MTO_PREAMBLE_LONG;
> - MTO_PREAMBLE_TYPE() = MTO_PREAMBLE_SHORT; // for test
> -
> - MTO_CNT_ANT(0) = 0;
> - MTO_CNT_ANT(1) = 0;
> - MTO_SQ_ANT(0) = 0;
> - MTO_SQ_ANT(1) = 0;
> -
> - MTO_AGING_TIMEOUT() = 0;
> -
> - // The following parameters should be initialized to the values set by user
> - //
> - //MTO_RATE_LEVEL() = 10;
> - MTO_RATE_LEVEL() = 0;
> - MTO_FRAG_TH_LEVEL() = 4;
> - /** 1.1.23.1000 Turbo modify from -1 to +1
> - MTO_RTS_THRESHOLD() = MTO_FRAG_TH() - 1;
> - MTO_RTS_THRESHOLD_SETUP() = MTO_FRAG_TH() - 1;
> - */
> - MTO_RTS_THRESHOLD() = MTO_FRAG_TH() + 1;
> - MTO_RTS_THRESHOLD_SETUP() = MTO_FRAG_TH() + 1;
> - // 1.1.23.1000 Turbo add for mto change preamble from 0 to 1
> - MTO_RATE_CHANGE_ENABLE() = 1;
> - MTO_FRAG_CHANGE_ENABLE() = 0; // 1.1.29.1000 Turbo add don't support frag
> - //The default valud of ANTDIV_DEFAULT_ON will be decided by EEPROM
> - //#ifdef ANTDIV_DEFAULT_ON
> - //#else
> - //#endif
> - MTO_POWER_CHANGE_ENABLE() = 1;
> - MTO_PREAMBLE_CHANGE_ENABLE()= 1;
> - MTO_RTS_CHANGE_ENABLE() = 0; // 1.1.29.1000 Turbo add don't support frag
> - // 20040512 Turbo add
> - //old_antenna[0] = 1;
> - //old_antenna[1] = 0;
> - //old_antenna[2] = 1;
> - //old_antenna[3] = 0;
> - for (i=0;i<MTO_MAX_DATA_RATE_LEVELS;i++)
> - retryrate_rec[i]=5;
> + int i;
> +
> + MTO_PREAMBLE_TYPE() = MTO_PREAMBLE_SHORT; /* for test */
> +
> + MTO_CNT_ANT(0) = 0;
> + MTO_CNT_ANT(1) = 0;
> + MTO_SQ_ANT(0) = 0;
> + MTO_SQ_ANT(1) = 0;
> +
> + MTO_AGING_TIMEOUT() = 0;
> +
> + /* The following parameters should be initialized to the values set by user */
> + MTO_RATE_LEVEL() = 0;
> + MTO_FRAG_TH_LEVEL() = 4;
> + MTO_RTS_THRESHOLD() = MTO_FRAG_TH() + 1;
> + MTO_RTS_THRESHOLD_SETUP() = MTO_FRAG_TH() + 1;
> + MTO_RATE_CHANGE_ENABLE() = 1;
> + MTO_FRAG_CHANGE_ENABLE() = 0;
> + MTO_POWER_CHANGE_ENABLE() = 1;
> + MTO_PREAMBLE_CHANGE_ENABLE() = 1;
> + MTO_RTS_CHANGE_ENABLE() = 0;
> +
> + for (i = 0; i < MTO_MAX_DATA_RATE_LEVELS; i++)
> + retryrate_rec[i] = 5;
>
> MTO_TXFLOWCOUNT() = 0;
> - //--------- DTO threshold parameters -------------
> - //MTOPARA_PERIODIC_CHECK_CYCLE() = 50;
> - MTOPARA_PERIODIC_CHECK_CYCLE() = 10;
> - MTOPARA_RSSI_TH_FOR_ANTDIV() = 10;
> - MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() = 50;
> - MTOPARA_TXRATE_INC_TH() = 10;
> - MTOPARA_TXRATE_DEC_TH() = 30;
> - MTOPARA_TXRATE_EQ_TH() = 40;
> - MTOPARA_TXRATE_BACKOFF() = 12;
> - MTOPARA_TXRETRYRATE_REDUCE() = 6;
> - if ( MTO_TXPOWER_FROM_EEPROM == 0xff)
> - {
> - switch( MTO_HAL()->phy_type)
> - {
> - case RF_AIROHA_2230:
> - case RF_AIROHA_2230S: // 20060420 Add this
> - MTOPARA_TXPOWER_INDEX() = 46; // MAX-8 // @@ Only for AL 2230
> - break;
> - case RF_AIROHA_7230:
> - MTOPARA_TXPOWER_INDEX() = 49;
> - break;
> - case RF_WB_242:
> - MTOPARA_TXPOWER_INDEX() = 10;
> - break;
> - case RF_WB_242_1:
> - MTOPARA_TXPOWER_INDEX() = 24; // ->10 20060316.1 modify
> - break;
> + /* --------- DTO threshold parameters ------------- */
> + MTOPARA_PERIODIC_CHECK_CYCLE() = 10;
> + MTOPARA_RSSI_TH_FOR_ANTDIV() = 10;
> + MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() = 50;
> + MTOPARA_TXRATE_INC_TH() = 10;
> + MTOPARA_TXRATE_DEC_TH() = 30;
> + MTOPARA_TXRATE_EQ_TH() = 40;
> + MTOPARA_TXRATE_BACKOFF() = 12;
> + MTOPARA_TXRETRYRATE_REDUCE() = 6;
> + if (MTO_TXPOWER_FROM_EEPROM == 0xff) {
> + switch (MTO_HAL()->phy_type) {
> + case RF_AIROHA_2230:
> + case RF_AIROHA_2230S:
> + MTOPARA_TXPOWER_INDEX() = 46; /* MAX-8 @@ Only for AL 2230 */
> + break;
> + case RF_AIROHA_7230:
> + MTOPARA_TXPOWER_INDEX() = 49;
> + break;
> + case RF_WB_242:
> + MTOPARA_TXPOWER_INDEX() = 10;
> + break;
> + case RF_WB_242_1:
> + MTOPARA_TXPOWER_INDEX() = 24;
> + break;
> }
> - }
> - else //follow the setting from EEPROM
> + } else { /* follow the setting from EEPROM */
> MTOPARA_TXPOWER_INDEX() = MTO_TXPOWER_FROM_EEPROM;
> - RFSynthesizer_SetPowerIndex(MTO_HAL(), (u8)MTOPARA_TXPOWER_INDEX());
> - //------------------------------------------------
> + }
> + RFSynthesizer_SetPowerIndex(MTO_HAL(), (u8) MTOPARA_TXPOWER_INDEX());
> + /* ------------------------------------------------ */
>
> - // For RSSI turning 20060808.4 Cancel load from EEPROM
> + /* For RSSI turning -- Cancel load from EEPROM */
> MTO_DATA().RSSI_high = -41;
> MTO_DATA().RSSI_low = -60;
> }
>
> -//===========================================================================
> -// Description:
> -// If we enable DTO, we will ignore the tx count with different tx rate from
> -// DTO rate. This is because when we adjust DTO tx rate, there could be some
> -// packets in the tx queue with previous tx rate
> +/* ===========================================================================
> + * Description:
> + * If we enable DTO, we will ignore the tx count with different tx rate
> + * from DTO rate. This is because when we adjust DTO tx rate, there could
> + * be some packets in the tx queue with previous tx rate
> + */
> +
> void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 tx_rate, u8 index)
> {
> MTO_TXFLOWCOUNT()++;
> - if ((MTO_ENABLE==1) && (MTO_RATE_CHANGE_ENABLE()==1))
> - {
> - if(tx_rate == MTO_DATA_RATE())
> - {
> - if (index == 0)
> - {
> + if ((MTO_ENABLE == 1) && (MTO_RATE_CHANGE_ENABLE() == 1)) {
> + if (tx_rate == MTO_DATA_RATE()) {
> + if (index == 0) {
> if (boSparseTxTraffic)
> MTO_HAL()->dto_tx_frag_count += MTOPARA_PERIODIC_CHECK_CYCLE();
> else
> MTO_HAL()->dto_tx_frag_count += 1;
> - }
> - else
> - {
> - if (index<8)
> - {
> + } else {
> + if (index < 8) {
> MTO_HAL()->dto_tx_retry_count += index;
> - MTO_HAL()->dto_tx_frag_count += (index+1);
> - }
> - else
> - {
> + MTO_HAL()->dto_tx_frag_count += (index + 1);
> + } else {
> MTO_HAL()->dto_tx_retry_count += 7;
> MTO_HAL()->dto_tx_frag_count += 7;
> }
> }
> - }
> - else if(MTO_DATA_RATE()>48 && tx_rate ==48)
> - {//ALFRED
> - if (index<3) //for reduciing data rate scheme ,
> - //do not calcu different data rate
> - //3 is the reducing data rate at retry
> - {
> + } else if (MTO_DATA_RATE() > 48 && tx_rate == 48) {
> + /* for reducing data rate scheme, do not calculate different data rate. 3 is the reducing data rate at retry. */
> + if (index < 3) {
> MTO_HAL()->dto_tx_retry_count += index;
> - MTO_HAL()->dto_tx_frag_count += (index+1);
> - }
> - else
> - {
> + MTO_HAL()->dto_tx_frag_count += (index + 1);
> + } else {
> MTO_HAL()->dto_tx_retry_count += 3;
> MTO_HAL()->dto_tx_frag_count += 3;
> }
>
> }
> - }
> - else
> - {
> + } else {
> MTO_HAL()->dto_tx_retry_count += index;
> - MTO_HAL()->dto_tx_frag_count += (index+1);
> + MTO_HAL()->dto_tx_frag_count += (index + 1);
> }
> - TotalTxPkt ++;
> - TotalTxPktRetry += (index+1);
> + TotalTxPkt++;
> + TotalTxPktRetry += (index + 1);
>
> - PeriodTotalTxPkt ++;
> - PeriodTotalTxPktRetry += (index+1);
> + PeriodTotalTxPkt++;
> + PeriodTotalTxPktRetry += (index + 1);
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists