| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100320002058.GJ1477@ucw.cz>
Date: Sat, 20 Mar 2010 01:20:58 +0100
From: Pavel Machek <pavel@....cz>
To: Lars Lindley <lindley@...ote.org>
Cc: gregkh@...e.de, greg@...ah.com, penberg@...helsinki.fi,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] staging: winbond: mto.h Coding style fixes
On Fri 2010-03-19 21:43:25, Lars Lindley wrote:
> I fixed all problems reported by checkpatch.pl except for a couple of
> long lines. I also removed version comments and removed "commented away"
> code.
>
> Signed-off-by: Lars Lindley <lindley@...ote.org>
ack.
> ---
> drivers/staging/winbond/mto.h | 179 +++++++++++++++++++----------------------
> 1 files changed, 82 insertions(+), 97 deletions(-)
>
> diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h
> index fb4781d..a0f659c 100644
> --- a/drivers/staging/winbond/mto.h
> +++ b/drivers/staging/winbond/mto.h
> @@ -1,13 +1,10 @@
> -//==================================================================
> -// MTO.H
> -//
> -// Revision history
> -//=================================
> -// 20030110 UN20 Pete Chao
> -// Initial Release
> -//
> -// Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
> -//==================================================================
> +/*
> + * ==================================================================
> + * MTO.H
> + *
> + * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
> + * ==================================================================
> + */
> #ifndef __MTO_H__
> #define __MTO_H__
>
> @@ -15,115 +12,104 @@
>
> struct wbsoft_priv;
>
> -// LA20040210_DTO kevin
> -//#define MTO_PREAMBLE_LONG 0
> -//#define MTO_PREAMBLE_SHORT 1
> #define MTO_PREAMBLE_LONG WLAN_PREAMBLE_TYPE_LONG
> #define MTO_PREAMBLE_SHORT WLAN_PREAMBLE_TYPE_SHORT
>
> -//============================================================================
> -// struct _MTOParameters --
> -//
> -// Defines the parameters used in the MAC Throughput Optimization algorithm
> -//============================================================================
> +/* Defines the parameters used in the MAC Throughput Optimization algorithm */
> struct wb35_mto_params {
> - //--------- wkchen added -------------
> - u32 TxFlowCount; //to judge what kind the tx flow(sparse or busy) is
> - //------------------------------------------------
> + u32 TxFlowCount; /* to judge what kind the tx flow(sparse or busy) is */
>
> - //--------- DTO threshold parameters -------------
> - u16 DTO_PeriodicCheckCycle;
> - u16 DTO_RssiThForAntDiv;
> + /* --------- DTO threshold parameters ------------- */
> + u16 DTO_PeriodicCheckCycle;
> + u16 DTO_RssiThForAntDiv;
>
> - u16 DTO_TxCountThForCalcNewRate;
> - u16 DTO_TxRateIncTh;
> + u16 DTO_TxCountThForCalcNewRate;
> + u16 DTO_TxRateIncTh;
>
> - u16 DTO_TxRateDecTh;
> - u16 DTO_TxRateEqTh;
> + u16 DTO_TxRateDecTh;
> + u16 DTO_TxRateEqTh;
>
> - u16 DTO_TxRateBackOff;
> - u16 DTO_TxRetryRateReduce;
> + u16 DTO_TxRateBackOff;
> + u16 DTO_TxRetryRateReduce;
>
> - u16 DTO_TxPowerIndex; //0 ~ 31
> - u16 reserved_1;
> - //------------------------------------------------
> + u16 DTO_TxPowerIndex; /* 0 ~ 31 */
> + u16 reserved_1;
> + /* ------------------------------------------------ */
>
> - u8 PowerChangeEnable;
> - u8 AntDiversityEnable;
> - u8 CCA_Mode;
> - u8 CCA_Mode_Setup;
> - u8 Preamble_Type;
> - u8 PreambleChangeEnable;
> + u8 PowerChangeEnable;
> + u8 AntDiversityEnable;
> + u8 CCA_Mode;
> + u8 CCA_Mode_Setup;
> + u8 Preamble_Type;
> + u8 PreambleChangeEnable;
>
> - u8 DataRateLevel;
> - u8 DataRateChangeEnable;
> - u8 FragThresholdLevel;
> - u8 FragThresholdChangeEnable;
> + u8 DataRateLevel;
> + u8 DataRateChangeEnable;
> + u8 FragThresholdLevel;
> + u8 FragThresholdChangeEnable;
>
> - u16 RTSThreshold;
> - u16 RTSThreshold_Setup;
> + u16 RTSThreshold;
> + u16 RTSThreshold_Setup;
>
> - u32 AvgIdleSlot;
> - u32 Pr_Interf;
> - u32 AvgGapBtwnInterf;
> + u32 AvgIdleSlot;
> + u32 Pr_Interf;
> + u32 AvgGapBtwnInterf;
>
> - u8 RTSChangeEnable;
> - u8 Ant_sel;
> - u8 aging_timeout;
> - u8 reserved_2;
> + u8 RTSChangeEnable;
> + u8 Ant_sel;
> + u8 aging_timeout;
> + u8 reserved_2;
>
> - u32 Cnt_Ant[2];
> - u32 SQ_Ant[2];
> + u32 Cnt_Ant[2];
> + u32 SQ_Ant[2];
>
> -// 20040510 remove from globe vairable
> - u8 FallbackRateLevel;
> - u8 OfdmRateLevel;
> + u8 FallbackRateLevel;
> + u8 OfdmRateLevel;
>
> - u8 RatePolicy;
> - u8 reserved_3[3];
> -
> - // For RSSI turning
> - s32 RSSI_high;
> - s32 RSSI_low;
> + u8 RatePolicy;
> + u8 reserved_3[3];
>
> + /* For RSSI turning */
> + s32 RSSI_high;
> + s32 RSSI_low;
> };
>
>
> -#define MTO_DATA() (adapter->sMtoPara)
> -#define MTO_HAL() (&adapter->sHwData)
> -#define MTO_SET_PREAMBLE_TYPE(x) // 20040511 Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x)
> -#define MTO_ENABLE (adapter->sLocalPara.TxRateMode == RATE_AUTO)
> -#define MTO_TXPOWER_FROM_EEPROM (adapter->sHwData.PowerIndexFromEEPROM)
> -#define LOCAL_ANTENNA_NO() (adapter->sLocalPara.bAntennaNo)
> -#define LOCAL_IS_CONNECTED() (adapter->sLocalPara.wConnectedSTAindex != 0)
> -#define MTO_INITTXRATE_MODE (adapter->sHwData.SoftwareSet&0x2) //bit 1
> +#define MTO_DATA() (adapter->sMtoPara)
> +#define MTO_HAL() (&adapter->sHwData)
> +#define MTO_SET_PREAMBLE_TYPE(x) /* Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) */
> +#define MTO_ENABLE (adapter->sLocalPara.TxRateMode == RATE_AUTO)
> +#define MTO_TXPOWER_FROM_EEPROM (adapter->sHwData.PowerIndexFromEEPROM)
> +#define LOCAL_ANTENNA_NO() (adapter->sLocalPara.bAntennaNo)
> +#define LOCAL_IS_CONNECTED() (adapter->sLocalPara.wConnectedSTAindex != 0)
> +#define MTO_INITTXRATE_MODE (adapter->sHwData.SoftwareSet&0x2) /* bit 1 */
>
> -#define MTO_POWER_CHANGE_ENABLE() MTO_DATA().PowerChangeEnable
> -#define MTO_CCA_MODE() MTO_DATA().CCA_Mode
> -#define MTO_CCA_MODE_SETUP() MTO_DATA().CCA_Mode_Setup
> -#define MTO_PREAMBLE_TYPE() MTO_DATA().Preamble_Type
> -#define MTO_PREAMBLE_CHANGE_ENABLE() MTO_DATA().PreambleChangeEnable
> +#define MTO_POWER_CHANGE_ENABLE() MTO_DATA().PowerChangeEnable
> +#define MTO_CCA_MODE() MTO_DATA().CCA_Mode
> +#define MTO_CCA_MODE_SETUP() MTO_DATA().CCA_Mode_Setup
> +#define MTO_PREAMBLE_TYPE() MTO_DATA().Preamble_Type
> +#define MTO_PREAMBLE_CHANGE_ENABLE() MTO_DATA().PreambleChangeEnable
>
> -#define MTO_RATE_LEVEL() MTO_DATA().DataRateLevel
> +#define MTO_RATE_LEVEL() MTO_DATA().DataRateLevel
> #define MTO_OFDM_RATE_LEVEL() MTO_DATA().OfdmRateLevel
> -#define MTO_RATE_CHANGE_ENABLE() MTO_DATA().DataRateChangeEnable
> -#define MTO_FRAG_TH_LEVEL() MTO_DATA().FragThresholdLevel
> -#define MTO_FRAG_CHANGE_ENABLE() MTO_DATA().FragThresholdChangeEnable
> -#define MTO_RTS_THRESHOLD() MTO_DATA().RTSThreshold
> -#define MTO_RTS_CHANGE_ENABLE() MTO_DATA().RTSChangeEnable
> -#define MTO_RTS_THRESHOLD_SETUP() MTO_DATA().RTSThreshold_Setup
> +#define MTO_RATE_CHANGE_ENABLE() MTO_DATA().DataRateChangeEnable
> +#define MTO_FRAG_TH_LEVEL() MTO_DATA().FragThresholdLevel
> +#define MTO_FRAG_CHANGE_ENABLE() MTO_DATA().FragThresholdChangeEnable
> +#define MTO_RTS_THRESHOLD() MTO_DATA().RTSThreshold
> +#define MTO_RTS_CHANGE_ENABLE() MTO_DATA().RTSChangeEnable
> +#define MTO_RTS_THRESHOLD_SETUP() MTO_DATA().RTSThreshold_Setup
>
> -#define MTO_AVG_IDLE_SLOT() MTO_DATA().AvgIdleSlot
> -#define MTO_PR_INTERF() MTO_DATA().Pr_Interf
> -#define MTO_AVG_GAP_BTWN_INTERF() MTO_DATA().AvgGapBtwnInterf
> +#define MTO_AVG_IDLE_SLOT() MTO_DATA().AvgIdleSlot
> +#define MTO_PR_INTERF() MTO_DATA().Pr_Interf
> +#define MTO_AVG_GAP_BTWN_INTERF() MTO_DATA().AvgGapBtwnInterf
>
> -#define MTO_CNT_ANT(x) MTO_DATA().Cnt_Ant[(x)]
> -#define MTO_SQ_ANT(x) MTO_DATA().SQ_Ant[(x)]
> -#define MTO_AGING_TIMEOUT() MTO_DATA().aging_timeout
> +#define MTO_CNT_ANT(x) MTO_DATA().Cnt_Ant[(x)]
> +#define MTO_SQ_ANT(x) MTO_DATA().SQ_Ant[(x)]
> +#define MTO_AGING_TIMEOUT() MTO_DATA().aging_timeout
>
> +#define MTO_TXFLOWCOUNT() MTO_DATA().TxFlowCount
>
> -#define MTO_TXFLOWCOUNT() MTO_DATA().TxFlowCount
> -//--------- DTO threshold parameters -------------
> +/* --------- DTO threshold parameters ------------- */
> #define MTOPARA_PERIODIC_CHECK_CYCLE() MTO_DATA().DTO_PeriodicCheckCycle
> #define MTOPARA_RSSI_TH_FOR_ANTDIV() MTO_DATA().DTO_RssiThForAntDiv
> #define MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() MTO_DATA().DTO_TxCountThForCalcNewRate
> @@ -133,13 +119,13 @@ struct wb35_mto_params {
> #define MTOPARA_TXRATE_BACKOFF() MTO_DATA().DTO_TxRateBackOff
> #define MTOPARA_TXRETRYRATE_REDUCE() MTO_DATA().DTO_TxRetryRateReduce
> #define MTOPARA_TXPOWER_INDEX() MTO_DATA().DTO_TxPowerIndex
> -//------------------------------------------------
> +/* ------------------------------------------------ */
>
>
> -extern u16 MTO_Frag_Th_Tbl[];
> +extern u16 MTO_Frag_Th_Tbl[];
>
> -#define MTO_DATA_RATE() MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
> -#define MTO_FRAG_TH() MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
> +#define MTO_DATA_RATE() MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
> +#define MTO_FRAG_TH() MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
>
> extern void MTO_Init(struct wbsoft_priv *);
> extern void MTO_PeriodicTimerExpired(struct wbsoft_priv *);
> @@ -148,6 +134,5 @@ extern u8 MTO_GetTxRate(struct wbsoft_priv *adapter, u32 fpdu_len);
> extern u8 MTO_GetTxFallbackRate(struct wbsoft_priv *adapter);
> extern void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
>
> -#endif //__MTO_H__
> -
> +#endif /* __MTO_H__ */
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists