| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1269805957-15663-1-git-send-email-lindley@coyote.org>
Date: Sun, 28 Mar 2010 21:52:37 +0200
From: Lars Lindley <lindley@...ote.org>
To: gregkh@...e.de, greg@...ah.com, penberg@...helsinki.fi,
pavel@....cz, harvey.harrison@...il.com
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Lars Lindley <lindley@...ote.org>
Subject: [PATCH] staging: winbond: wbhal_s.h Coding style fixes.
I fixed checkpatch warnings except some long lines and typedefs.
I also removed versioning comments.
Signed-off-by: Lars Lindley <lindley@...ote.org>
---
drivers/staging/winbond/wbhal_s.h | 502 ++++++++++++++++++-------------------
1 files changed, 242 insertions(+), 260 deletions(-)
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 372a05e..33457c2 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -4,179 +4,166 @@
#include <linux/types.h>
#include <linux/if_ether.h> /* for ETH_ALEN */
-//[20040722 WK]
-#define HAL_LED_SET_MASK 0x001c //20060901 Extend
-#define HAL_LED_SET_SHIFT 2
+#define HAL_LED_SET_MASK 0x001c
+#define HAL_LED_SET_SHIFT 2
-//supported RF type
+/* supported RF type */
#define RF_MAXIM_2825 0
#define RF_MAXIM_2827 1
#define RF_MAXIM_2828 2
#define RF_MAXIM_2829 3
-#define RF_MAXIM_V1 15
+#define RF_MAXIM_V1 15
#define RF_AIROHA_2230 16
#define RF_AIROHA_7230 17
-#define RF_AIROHA_2230S 18 // 20060420 Add this
-// #define RF_RFMD_2959 32 // 20060626 Remove all about RFMD
-#define RF_WB_242 33
-#define RF_WB_242_1 34 // 20060619.5 Add
+#define RF_AIROHA_2230S 18
+#define RF_WB_242 33
+#define RF_WB_242_1 34
#define RF_DECIDE_BY_INF 255
-//----------------------------------------------------------------
-// The follow define connect to upper layer
-// User must modify for connection between HAL and upper layer
-//----------------------------------------------------------------
-
-
-
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-//================================================================================================
-// Common define
-//================================================================================================
-#define HAL_USB_MODE_BURST( _H ) (_H->SoftwareSet & 0x20 ) // Bit 5 20060901 Modify
-
-// Scan interval
-#define SCAN_MAX_CHNL_TIME (50)
-
-// For TxL2 Frame typr recognise
+/*
+ * ----------------------------------------------------------------
+ * The follow define connect to upper layer
+ * User must modify for connection between HAL and upper layer
+ * ----------------------------------------------------------------
+ */
+
+/*
+ * ==============================
+ * Common define
+ * ==============================
+ */
+/* Bit 5 */
+#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
+
+/* Scan interval */
+#define SCAN_MAX_CHNL_TIME (50)
+
+/* For TxL2 Frame typr recognise */
#define FRAME_TYPE_802_3_DATA 0
#define FRAME_TYPE_802_11_MANAGEMENT 1
-#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
+#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
#define FRAME_TYPE_802_11_CONTROL 3
#define FRAME_TYPE_802_11_DATA 4
#define FRAME_TYPE_PROMISCUOUS 5
-// The follow definition is used for convert the frame--------------------
-#define DOT_11_SEQUENCE_OFFSET 22 //Sequence control offset
+/* The follow definition is used for convert the frame------------ */
+#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
#define DOT_3_TYPE_OFFSET 12
-#define DOT_11_MAC_HEADER_SIZE 24
+#define DOT_11_MAC_HEADER_SIZE 24
#define DOT_11_SNAP_SIZE 6
-#define DOT_11_TYPE_OFFSET 30 //The start offset of 802.11 Frame. Type encapsulatuin.
+#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
#define DEFAULT_SIFSTIME 10
-#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment
+#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
#define DEFAULT_MSDU_LIFE_TIME 0xffff
-#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144+48)
-#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72+24)
-#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16+4+6)
-#define Tsym 4
+#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
+#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
+#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
+#define Tsym 4
-// Frame Type of Bits (2, 3)---------------------------------------------
+/* Frame Type of Bits (2, 3)----------------------------------- */
#define MAC_TYPE_MANAGEMENT 0x00
#define MAC_TYPE_CONTROL 0x04
#define MAC_TYPE_DATA 0x08
-#define MASK_FRAGMENT_NUMBER 0x000F
-#define SEQUENCE_NUMBER_SHIFT 4
+#define MASK_FRAGMENT_NUMBER 0x000F
+#define SEQUENCE_NUMBER_SHIFT 4
#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
#define HAL_WOL_TYPE_MAGIC_PACKET 0x02
-// 20040106 ADDED
-#define HAL_KEYTYPE_WEP40 0
-#define HAL_KEYTYPE_WEP104 1
-#define HAL_KEYTYPE_TKIP 2 // 128 bit key
-#define HAL_KEYTYPE_AES_CCMP 3 // 128 bit key
+#define HAL_KEYTYPE_WEP40 0
+#define HAL_KEYTYPE_WEP104 1
+#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
+#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
-// For VM state
+/* For VM state */
enum {
VM_STOP = 0,
VM_RUNNING,
VM_COMPLETED
};
-//-----------------------------------------------------
-// Normal Key table format
-//-----------------------------------------------------
-// The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX
-#define MAX_KEY_TABLE 24 // 24 entry for storing key data
+/*
+ * ================================
+ * Normal Key table format
+ * ================================
+ */
+
+/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
+#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
#define GROUP_KEY_START_INDEX 4
#define MAPPING_KEY_START_INDEX 8
-//--------------------------------------------------------
-// Descriptor
-//--------------------------------------------------------
-#define MAX_DESCRIPTOR_BUFFER_INDEX 8 // Have to multiple of 2
-//#define FLAG_ERROR_TX_MASK cpu_to_le32(0x000000bf) //20061009 marked by anson's endian
-#define FLAG_ERROR_TX_MASK 0x000000bf //20061009 anson's endian
-//#define FLAG_ERROR_RX_MASK 0x00000c3f
-//#define FLAG_ERROR_RX_MASK cpu_to_le32(0x0000083f) //20061009 marked by anson's endian
- //Don't care replay error,
- //it is handled by S/W
-#define FLAG_ERROR_RX_MASK 0x0000083f //20060926 anson's endian
-
-#define FLAG_BAND_RX_MASK 0x10000000 //Bit 28
-
-typedef struct _R00_DESCRIPTOR
-{
- union
- {
+/*
+ * =========================================
+ * Descriptor
+ * =========================================
+ */
+#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
+#define FLAG_ERROR_TX_MASK 0x000000bf
+#define FLAG_ERROR_RX_MASK 0x0000083f
+
+#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
+
+typedef struct _R00_DESCRIPTOR {
+ union {
u32 value;
- #ifdef _BIG_ENDIAN_ //20060926 anson's endian
- struct
- {
+#ifdef _BIG_ENDIAN_
+ struct {
u32 R00_packet_or_buffer_status:1;
u32 R00_packet_in_fifo:1;
u32 R00_RESERVED:2;
u32 R00_receive_byte_count:12;
u32 R00_receive_time_index:16;
};
- #else
- struct
- {
+#else
+ struct {
u32 R00_receive_time_index:16;
u32 R00_receive_byte_count:12;
u32 R00_RESERVED:2;
u32 R00_packet_in_fifo:1;
u32 R00_packet_or_buffer_status:1;
};
- #endif
+#endif
};
} R00_DESCRIPTOR, *PR00_DESCRIPTOR;
-typedef struct _T00_DESCRIPTOR
-{
- union
- {
+typedef struct _T00_DESCRIPTOR {
+ union {
u32 value;
- #ifdef _BIG_ENDIAN_ //20061009 anson's endian
- struct
- {
- u32 T00_first_mpdu:1; // for hardware use
- u32 T00_last_mpdu:1; // for hardware use
- u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used
- u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
- u32 T00_RESERVED_ID:2;//3 bit ID reserved
- u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 T00_first_mpdu:1; /* for hardware use */
+ u32 T00_last_mpdu:1; /* for hardware use */
+ u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
+ u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
+ u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
+ u32 T00_tx_packet_id:4;
u32 T00_RESERVED:4;
u32 T00_header_length:6;
u32 T00_frame_length:12;
};
- #else
- struct
- {
+#else
+ struct {
u32 T00_frame_length:12;
u32 T00_header_length:6;
u32 T00_RESERVED:4;
- u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c
- u32 T00_RESERVED_ID:2;//3 bit ID reserved
- u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
- u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used
- u32 T00_last_mpdu:1; // for hardware use
- u32 T00_first_mpdu:1; // for hardware use
+ u32 T00_tx_packet_id:4;
+ u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
+ u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
+ u32 T00_last_mpdu:1; /* for hardware use */
+ u32 T00_first_mpdu:1; /* for hardware use */
};
- #endif
+#endif
};
} T00_DESCRIPTOR, *PT00_DESCRIPTOR;
-typedef struct _R01_DESCRIPTOR
-{
- union
- {
+typedef struct _R01_DESCRIPTOR {
+ union {
u32 value;
- #ifdef _BIG_ENDIAN_ //20060926 add by anson's endian
- struct
- {
+#ifdef _BIG_ENDIAN_
+ struct {
u32 R01_RESERVED:3;
u32 R01_mod_type:1;
u32 R01_pre_type:1;
@@ -197,9 +184,8 @@ typedef struct _R01_DESCRIPTOR
u32 R01_icv_error:1;
u32 R01_crc_error:1;
};
- #else
- struct
- {
+#else
+ struct {
u32 R01_crc_error:1;
u32 R01_icv_error:1;
u32 R01_null_key_to_authentication_frame:1;
@@ -220,18 +206,15 @@ typedef struct _R01_DESCRIPTOR
u32 R01_mod_type:1;
u32 R01_RESERVED:3;
};
- #endif
+#endif
};
} R01_DESCRIPTOR, *PR01_DESCRIPTOR;
-typedef struct _T01_DESCRIPTOR
-{
- union
- {
+typedef struct _T01_DESCRIPTOR {
+ union {
u32 value;
- #ifdef _BIG_ENDIAN_ //20061009 anson's endian
- struct
- {
+#ifdef _BIG_ENDIAN_
+ struct {
u32 T01_rts_cts_duration:16;
u32 T01_fall_back_rate:3;
u32 T01_add_rts:1;
@@ -245,9 +228,8 @@ typedef struct _T01_DESCRIPTOR
u32 T01_loop_back_wep_mode:1;
u32 T01_retry_abort_ebable:1;
};
- #else
- struct
- {
+#else
+ struct {
u32 T01_retry_abort_ebable:1;
u32 T01_loop_back_wep_mode:1;
u32 T01_inhibit_crc:1;
@@ -261,21 +243,18 @@ typedef struct _T01_DESCRIPTOR
u32 T01_fall_back_rate:3;
u32 T01_rts_cts_duration:16;
};
- #endif
+#endif
};
} T01_DESCRIPTOR, *PT01_DESCRIPTOR;
-typedef struct _T02_DESCRIPTOR
-{
- union
- {
+typedef struct _T02_DESCRIPTOR {
+ union {
u32 value;
- #ifdef _BIG_ENDIAN_ //20061009 add by anson's endian
- struct
- {
- u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting
- u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
- u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
+ u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
u32 T02_Tx_PktID:4;
u32 T02_MPDU_Cnt:4;
u32 T02_RTS_Cnt:4;
@@ -290,9 +269,8 @@ typedef struct _T02_DESCRIPTOR
u32 T02_transmit_abort:1;
u32 T02_transmit_fail:1;
};
- #else
- struct
- {
+#else
+ struct {
u32 T02_transmit_fail:1;
u32 T02_transmit_abort:1;
u32 T02_out_of_MaxTxMSDULiftTime:1;
@@ -306,122 +284,120 @@ typedef struct _T02_DESCRIPTOR
u32 T02_RTS_Cnt:4;
u32 T02_MPDU_Cnt:4;
u32 T02_Tx_PktID:4;
- u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting
- u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
- u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting
+ u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
+ u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
};
- #endif
+#endif
};
} T02_DESCRIPTOR, *PT02_DESCRIPTOR;
-struct wb35_descriptor { // Skip length = 8 DWORD
- // ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition
+struct wb35_descriptor { /* Skip length = 8 DWORD */
+ /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
u8 Descriptor_ID;
- //----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------
+ /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
u8 RESERVED[3];
u16 FragmentThreshold;
- u8 InternalUsed;//Only can be used by operation of descriptor definition
- u8 Type;// 0: 802.3 1:802.11 data frame 2:802.11 management frame
+ u8 InternalUsed; /* Only can be used by operation of descriptor definition */
+ u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
- u8 PreambleMode;// 0: short 1:long
+ u8 PreambleMode;/* 0: short 1:long */
u8 TxRate;
u8 FragmentCount;
- u8 EapFix; // For speed up key install
+ u8 EapFix; /* For speed up key install */
- // For R00 and T00 ----------------------------------------------
- union
- {
+ /* For R00 and T00 ------------------------------ */
+ union {
R00_DESCRIPTOR R00;
T00_DESCRIPTOR T00;
};
- // For R01 and T01 ----------------------------------------------
- union
- {
+ /* For R01 and T01 ------------------------------ */
+ union {
R01_DESCRIPTOR R01;
T01_DESCRIPTOR T01;
};
- // For R02 and T02 ----------------------------------------------
- union
- {
- u32 R02;
+ /* For R02 and T02 ------------------------------ */
+ union {
+ u32 R02;
T02_DESCRIPTOR T02;
};
- // For R03 and T03 ----------------------------------------------
- // For software used
- union
- {
+ /* For R03 and T03 ------------------------------ */
+ /* For software used */
+ union {
u32 R03;
u32 T03;
- struct
- {
+ struct {
u8 buffer_number;
u8 buffer_start_index;
u16 buffer_total_size;
};
};
- // For storing the buffer
- u16 buffer_size[ MAX_DESCRIPTOR_BUFFER_INDEX ];
- void* buffer_address[ MAX_DESCRIPTOR_BUFFER_INDEX ];//931130.4.q
-
+ /* For storing the buffer */
+ u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
+ void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
};
-#define DEFAULT_NULL_PACKET_COUNT 180000 //20060828.1 Add. 180 seconds
+#define DEFAULT_NULL_PACKET_COUNT 180000 /* 180 seconds */
-#define MAX_TXVGA_EEPROM 9 //How many word(u16) of EEPROM will be used for TxVGA
-#define MAX_RF_PARAMETER 32
+#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
+#define MAX_RF_PARAMETER 32
typedef struct _TXVGA_FOR_50 {
- u8 ChanNo;
- u8 TxVgaValue;
+ u8 ChanNo;
+ u8 TxVgaValue;
} TXVGA_FOR_50;
-//=====================================================================
-// Device related include
-//=====================================================================
+/*
+ * ==============================================
+ * Device related include
+ * ==============================================
+ */
#include "wbusb_s.h"
#include "wb35reg_s.h"
#include "wb35tx_s.h"
#include "wb35rx_s.h"
-// For Hal using ==================================================================
+/* For Hal using ============================================ */
struct hw_data {
- // For compatible with 33
+ /* For compatible with 33 */
u32 revision;
- u32 BB3c_cal; // The value for Tx calibration comes from EEPROM
- u32 BB54_cal; // The value for Rx calibration comes from EEPROM
+ u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
+ u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
-
- // For surprise remove
- u32 SurpriseRemove; // 0: Normal 1: Surprise remove
+ /* For surprise remove */
+ u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
u8 IsKeyPreSet;
- u8 CalOneTime; // 20060630.1
+ u8 CalOneTime;
u8 VCO_trim;
- // For Fix 1'st DMA bug
u32 FragCount;
- u32 DMAFix; //V1_DMA_FIX The variable can be removed if driver want to save mem space for V2.
-
- //===============================================
- // Definition for MAC address
- //===============================================
- u8 PermanentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are stored in EEPROM. + 2 to 8-byte alignment
- u8 CurrentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are in used. + 2 to 8-byte alignment
-
- //=====================================================================
- // Definition for 802.11
- //=====================================================================
- u8 *bssid_pointer; // Used by hal_get_bssid for return value
- u8 bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer
- u8 ssid[32];// maximum ssid length is 32 byte
+ u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
+
+ /*
+ * ===============================================
+ * Definition for MAC address
+ * ===============================================
+ */
+ u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
+ u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
+
+ /*
+ * =========================================
+ * Definition for 802.11
+ * =========================================
+ */
+ u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
+ u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
+ u8 ssid[32]; /* maximum ssid length is 32 byte */
u16 AID;
u8 ssid_length;
@@ -433,112 +409,118 @@ struct hw_data {
u16 BeaconPeriod;
u16 ProbeDelay;
- u8 bss_type;// 0: IBSS_NET or 1:ESS_NET
- u8 preamble;// 0: short preamble, 1: long preamble
- u8 slot_time_select;// 9 or 20 value
- u8 phy_type;// Phy select
+ u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
+ u8 preamble;/* 0: short preamble, 1: long preamble */
+ u8 slot_time_select; /* 9 or 20 value */
+ u8 phy_type; /* Phy select */
u32 phy_para[MAX_RF_PARAMETER];
u32 phy_number;
- u32 CurrentRadioSw; // 20060320.2 0:On 1:Off
- u32 CurrentRadioHw; // 20060825 0:On 1:Off
+ u32 CurrentRadioSw; /* 0:On 1:Off */
+ u32 CurrentRadioHw; /* 0:On 1:Off */
- u8 *power_save_point; // Used by hal_get_power_save_mode for return value
+ u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
u8 cwmin;
u8 desired_power_save;
- u8 dtim;// Is running dtim
- u8 mapping_key_replace_index;//In Key table, the next index be replaced 931130.4.r
+ u8 dtim; /* Is running dtim */
+ u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
u16 MaxReceiveLifeTime;
u16 FragmentThreshold;
u16 FragmentThreshold_tmp;
u16 cwmax;
- u8 Key_slot[MAX_KEY_TABLE][8]; //Ownership record for key slot. For Alignment
- u32 Key_content[MAX_KEY_TABLE][12]; // 10DW for each entry + 2 for burst command( Off and On valid bit)
+ u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
+ u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
u8 CurrentDefaultKeyIndex;
u32 CurrentDefaultKeyLength;
- //========================================================================
- // Variable for each module
- //========================================================================
- struct wb_usb WbUsb; // Need WbUsb.h
- struct wb35_reg reg; // Need Wb35Reg.h
- struct wb35_tx Wb35Tx; // Need Wb35Tx.h
- struct wb35_rx Wb35Rx; // Need Wb35Rx.h
+ /*
+ * ==================================================
+ * Variable for each module
+ * ==================================================
+ */
+ struct wb_usb WbUsb; /* Need WbUsb.h */
+ struct wb35_reg reg; /* Need Wb35Reg.h */
+ struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
+ struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
- struct timer_list LEDTimer;// For LED
+ struct timer_list LEDTimer; /* For LED */
- u32 LEDpoint;// For LED
+ u32 LEDpoint; /* For LED */
- u32 dto_tx_retry_count; // LA20040210_DTO kevin
- u32 dto_tx_frag_count; // LA20040210_DTO kevin
- u32 rx_ok_count[13]; // index=0: total rx ok
- //u32 rx_ok_bytes[13]; // index=0, total rx ok bytes
- u32 rx_err_count[13]; // index=0: total rx err
+ u32 dto_tx_retry_count;
+ u32 dto_tx_frag_count;
+ u32 rx_ok_count[13]; /* index=0: total rx ok */
+ u32 rx_err_count[13]; /* index=0: total rx err */
- //for Tx debug
+ /* for Tx debug */
u32 tx_TBTT_start_count;
u32 tx_ETR_count;
u32 tx_WepOn_false_count;
u32 tx_Null_key_count;
u32 tx_retry_count[8];
- u8 PowerIndexFromEEPROM; // For 2412MHz
- u8 power_index;
- u8 IsWaitJoinComplete; // TRUE: set join request
- u8 band;
+ u8 PowerIndexFromEEPROM; /* For 2412MHz */
+ u8 power_index;
+ u8 IsWaitJoinComplete; /* TRUE: set join request */
+ u8 band;
- u16 SoftwareSet;
- u16 Reserved_s;
+ u16 SoftwareSet;
+ u16 Reserved_s;
- u32 IsInitOK; // 0: Driver starting 1: Driver init OK
+ u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
- // For Phy calibration
- s32 iq_rsdl_gain_tx_d2;
- s32 iq_rsdl_phase_tx_d2;
- u32 txvga_setting_for_cal; // 20060703.1 Add
+ /* For Phy calibration */
+ s32 iq_rsdl_gain_tx_d2;
+ s32 iq_rsdl_phase_tx_d2;
+ u32 txvga_setting_for_cal;
- u8 TxVgaSettingInEEPROM[ (((MAX_TXVGA_EEPROM*2)+3) & ~0x03) ]; // 20060621 For backup EEPROM value
- u8 TxVgaFor24[16]; // Max is 14, 2 for alignment
- TXVGA_FOR_50 TxVgaFor50[36]; // 35 channels in 5G. 35x2 = 70 byte. 2 for alignments
+ u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
+ u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
+ TXVGA_FOR_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
- u16 Scan_Interval;
- u16 RESERVED6;
+ u16 Scan_Interval;
+ u16 RESERVED6;
- // LED control
+ /* LED control */
u32 LED_control;
- // LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
- // Gray_Led
- // For Led gray setting
- // Led
- // 0: normal control, LED behavior will decide by EEPROM setting
- // 1: Turn off specific LED
- // 2: Always on specific LED
- // 3: slow blinking specific LED
- // 4: fast blinking specific LED
- // 5: WPS led control is set. Led0 is Red, Led1 id Green
- // Led[1] is parameter for WPS LED mode
- // // 1:InProgress 2: Error 3: Session overlap 4: Success 20061108 control
-
- u32 LED_LinkOn; //Turn LED on control
- u32 LED_Scanning; // Let LED in scan process control
- u32 LED_Blinking; // Temp variable for shining
+ /*
+ * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
+ * Gray_Led
+ * For Led gray setting
+ * Led
+ * 0: normal control,
+ * LED behavior will decide by EEPROM setting
+ * 1: Turn off specific LED
+ * 2: Always on specific LED
+ * 3: slow blinking specific LED
+ * 4: fast blinking specific LED
+ * 5: WPS led control is set. Led0 is Red, Led1 id Green
+ *
+ * Led[1] is parameter for WPS LED mode
+ * 1:InProgress
+ * 2: Error
+ * 3: Session overlap
+ * 4: Success control
+ */
+ u32 LED_LinkOn; /* Turn LED on control */
+ u32 LED_Scanning; /* Let LED in scan process control */
+ u32 LED_Blinking; /* Temp variable for shining */
u32 RxByteCountLast;
u32 TxByteCountLast;
atomic_t SurpriseRemoveCount;
- // For global timer
- u32 time_count;//TICK_TIME_100ms 1 = 100ms
+ /* For global timer */
+ u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
- // For error recover
+ /* For error recover */
u32 HwStop;
- // 20060828.1 for avoid AP disconnect
+ /* For avoid AP disconnect */
u32 NullPacketCount;
-
};
#endif
--
1.7.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists