lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 30 Mar 2010 19:38:53 +0200 From: Daniel Mack <daniel@...aq.de> To: linux-kernel@...r.kernel.org Cc: Daniel Mack <daniel@...aq.de>, Alagu Sankar <alagusankar@...wise.com>, Volker Ernst <volker.ernst@...r.com>, Dan Williams <dcbw@...hat.com>, "John W. Linville" <linville@...driver.com>, Holger Schurig <hs4233@...l.mn-solutions.de>, Bing Zhao <bzhao@...vell.com>, libertas-dev@...ts.infradead.org, linux-wireless@...r.kernel.org, linux-mmc@...r.kernel.org Subject: [PATCH] libertas/sdio: set ECSI and SCSI bits for 1-bit transfers When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line. However, the 8686 will only drive this line when the ECSI and SCSI bits are set in the CCCR_IF register. Thanks to Alagu Sankar for pointing me in the right direction. Signed-off-by: Daniel Mack <daniel@...aq.de> Cc: Alagu Sankar <alagusankar@...wise.com> Cc: Volker Ernst <volker.ernst@...r.com> Cc: Dan Williams <dcbw@...hat.com> Cc: John W. Linville <linville@...driver.com> Cc: Holger Schurig <hs4233@...l.mn-solutions.de> Cc: Bing Zhao <bzhao@...vell.com> Cc: libertas-dev@...ts.infradead.org Cc: linux-wireless@...r.kernel.org Cc: linux-mmc@...r.kernel.org --- drivers/net/wireless/libertas/if_sdio.c | 24 ++++++++++++++++++++++++ include/linux/mmc/sdio.h | 2 ++ 2 files changed, 26 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 7a73f62..d3170f2 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -34,6 +34,8 @@ #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/host.h> #include "host.h" #include "decl.h" @@ -942,6 +944,7 @@ static int if_sdio_probe(struct sdio_func *func, int ret, i; unsigned int model; struct if_sdio_packet *packet; + struct mmc_host *host = func->card->host; lbs_deb_enter(LBS_DEB_SDIO); @@ -1022,6 +1025,27 @@ static int if_sdio_probe(struct sdio_func *func, if (ret) goto disable; + /* For 1-bit transfers, we need to enable the interrupt flags in + * the CCCR register. Temporarily set the function number to 0 + * for that. */ + if ((host->caps & MMC_CAP_SDIO_IRQ) && + (host->ios.bus_width == MMC_BUS_WIDTH_1)) { + unsigned int num = func->num; + u8 reg; + + func->num = 0; + reg = sdio_readb(func, SDIO_CCCR_IF, &ret); + if (ret) + goto release_int; + + reg |= SDIO_BUS_ECSI | SDIO_BUS_SCSI; + sdio_writeb(func, reg, SDIO_CCCR_IF, &ret); + if (ret) + goto release_int; + + func->num = num; + } + card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); if (ret) goto release_int; diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 0ebaef5..329a8fa 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -94,6 +94,8 @@ #define SDIO_BUS_WIDTH_1BIT 0x00 #define SDIO_BUS_WIDTH_4BIT 0x02 +#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ +#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ #define SDIO_BUS_ASYNC_INT 0x20 -- 1.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists