linux-kernel - [PATCH] libertas/sdio: set ECSI bit for 1-bit transfers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1270042309-18606-1-git-send-email-daniel@caiaq.de>
Date:	Wed, 31 Mar 2010 15:31:49 +0200
From:	Daniel Mack <daniel@...aq.de>
To:	linux-kernel@...r.kernel.org
Cc:	mirqus@...il.com, Daniel Mack <daniel@...aq.de>,
	Alagu Sankar <alagusankar@...wise.com>,
	Volker Ernst <volker.ernst@...r.com>,
	Dan Williams <dcbw@...hat.com>,
	"John W. Linville" <linville@...driver.com>,
	Holger Schurig <hs4233@...l.mn-solutions.de>,
	Bing Zhao <bzhao@...vell.com>,
	libertas-dev@...ts.infradead.org, linux-wireless@...r.kernel.org,
	linux-mmc@...r.kernel.org
Subject: [PATCH] libertas/sdio: set ECSI bit for 1-bit transfers

When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line.
However, the 8686 will only drive this line when the ECSI bit is set in
the CCCR_IF register.

Thanks to Alagu Sankar for pointing me in the right direction.

Signed-off-by: Daniel Mack <daniel@...aq.de>
Cc: Alagu Sankar <alagusankar@...wise.com>
Cc: Volker Ernst <volker.ernst@...r.com>
Cc: Dan Williams <dcbw@...hat.com>
Cc: John W. Linville <linville@...driver.com>
Cc: Holger Schurig <hs4233@...l.mn-solutions.de>
Cc: Bing Zhao <bzhao@...vell.com>
Cc: libertas-dev@...ts.infradead.org
Cc: linux-wireless@...r.kernel.org
Cc: linux-mmc@...r.kernel.org
---
 drivers/net/wireless/libertas/if_sdio.c |   21 +++++++++++++++++++++
 include/linux/mmc/sdio.h                |    2 ++
 2 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 7a73f62..f89bb8b 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -34,6 +34,8 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
 
 #include "host.h"
 #include "decl.h"
@@ -942,6 +944,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	int ret, i;
 	unsigned int model;
 	struct if_sdio_packet *packet;
+	struct mmc_host *host = func->card->host;
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
@@ -1022,6 +1025,24 @@ static int if_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto disable;
 
+	/* For 1-bit transfers, we need to enable the interrupt flag in
+	 * the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 bit to allow
+	 * access to non-vendor registers. */
+	if ((host->caps & MMC_CAP_SDIO_IRQ) &&
+	    (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+		u8 reg;
+
+		func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+		reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto release_int;
+
+		reg |= SDIO_BUS_ECSI;
+		sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+		if (ret)
+			goto release_int;
+	}
+
 	card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
 	if (ret)
 		goto release_int;
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 0ebaef5..329a8fa 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -94,6 +94,8 @@
 
 #define  SDIO_BUS_WIDTH_1BIT	0x00
 #define  SDIO_BUS_WIDTH_4BIT	0x02
+#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
+#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
 
 #define  SDIO_BUS_ASYNC_INT	0x20
 
-- 
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/