| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100402094021.GA8442@atrey.karlin.mff.cuni.cz>
Date: Fri, 2 Apr 2010 11:40:21 +0200
From: Pavel Machek <pavel@....cz>
To: Lars Lindley <lindley@...ote.org>
Cc: gregkh@...e.de, greg@...ah.com, penberg@...helsinki.fi,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] staging: winbond: wbusb.c Coding style fixes.
> I fixed the reported checkpatch.pl problems except for a bunch of
> long lines and some printk:s.
> I also removed versioning comments.
>
> Signed-off-by: Lars Lindley <lindley@...ote.org>
ACK.
> ---
> drivers/staging/winbond/wbusb.c | 187 +++++++++++++++++---------------------
> 1 files changed, 84 insertions(+), 103 deletions(-)
>
> diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
> index 3482eec..d7694e6 100644
> --- a/drivers/staging/winbond/wbusb.c
> +++ b/drivers/staging/winbond/wbusb.c
> @@ -142,19 +142,17 @@ static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
> if (pHwData->SurpriseRemove)
> return;
>
> - if (radio_off) //disable Baseband receive off
> - {
> - pHwData->CurrentRadioSw = 1; // off
> + if (radio_off) { /* disable Baseband receive off */
> + pHwData->CurrentRadioSw = 1; /* off */
> reg->M24_MacControl &= 0xffffffbf;
> } else {
> - pHwData->CurrentRadioSw = 0; // on
> + pHwData->CurrentRadioSw = 0; /* on */
> reg->M24_MacControl |= 0x00000040;
> }
> Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
> }
>
> -static void
> -hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
> +static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
> {
> struct wb35_reg *reg = &pHwData->reg;
>
> @@ -163,17 +161,18 @@ hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
>
> printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
>
> - RFSynthesizer_SwitchingChannel(pHwData, channel); // Switch channel
> + RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
> pHwData->Channel = channel.ChanNo;
> pHwData->band = channel.band;
> #ifdef _PE_STATE_DUMP_
> printk("Set channel is %d, band =%d\n", pHwData->Channel,
> pHwData->band);
> #endif
> - reg->M28_MacControl &= ~0xff; // Clean channel information field
> + reg->M28_MacControl &= ~0xff; /* Clean channel information field */
> reg->M28_MacControl |= channel.ChanNo;
> Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
> - (s8 *) & channel, sizeof(struct chan_info));
> + (s8 *) &channel,
> + sizeof(struct chan_info));
> }
>
> static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel)
> @@ -188,21 +187,22 @@ static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
> if (pHwData->SurpriseRemove)
> return;
>
> - reg->M00_MacControl &= ~0x02000000; //The HW value
> + reg->M00_MacControl &= ~0x02000000; /* The HW value */
>
> if (enable)
> - reg->M00_MacControl |= 0x02000000; //The HW value
> + reg->M00_MacControl |= 0x02000000; /* The HW value */
>
> Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
> }
>
> -//for wep key error detection, we need to accept broadcast packets to be received temporary.
> +/* For wep key error detection, we need to accept broadcast packets to be received temporary. */
> static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
> {
> struct wb35_reg *reg = &pHwData->reg;
>
> if (pHwData->SurpriseRemove)
> return;
> +
> if (enable) {
> reg->M00_MacControl |= 0x00400000;
> Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
> @@ -219,9 +219,9 @@ static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable)
> if (pHwData->SurpriseRemove)
> return;
>
> - reg->M00_MacControl &= ~0x01000000; //The HW value
> + reg->M00_MacControl &= ~0x01000000; /* The HW value */
> if (enable)
> - reg->M00_MacControl |= 0x01000000; //The HW value
> + reg->M00_MacControl |= 0x01000000; /* The HW value */
> Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
> }
>
> @@ -232,13 +232,12 @@ static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
> if (pHwData->SurpriseRemove)
> return;
>
> - // 20040108 debug
> - if (!enable) //Due to SME and MLME are not suitable for 35
> + if (!enable) /* Due to SME and MLME are not suitable for 35 */
> return;
>
> - reg->M00_MacControl &= ~0x04000000; //The HW value
> + reg->M00_MacControl &= ~0x04000000; /* The HW value */
> if (enable)
> - reg->M00_MacControl |= 0x04000000; //The HW value
> + reg->M00_MacControl |= 0x04000000; /* The HW value */
>
> Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
> }
> @@ -283,8 +282,7 @@ static const struct ieee80211_ops wbsoft_ops = {
> .get_tsf = wbsoft_get_tsf,
> };
>
> -static void
> -hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
> +static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address)
> {
> u32 ltmp[2];
>
> @@ -294,14 +292,12 @@ hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
> memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN);
>
> ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress);
> - ltmp[1] =
> - cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
> + ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
>
> Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
> }
>
> -static void
> -hal_get_permanent_address(struct hw_data *pHwData, u8 * pethernet_address)
> +static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address)
> {
> if (pHwData->SurpriseRemove)
> return;
> @@ -319,7 +315,7 @@ static void hal_stop(struct hw_data *pHwData)
> pHwData->Wb35Tx.tx_halt = 1;
> Wb35Tx_stop(pHwData);
>
> - reg->D00_DmaControl &= ~0xc0000000; //Tx Off, Rx Off
> + reg->D00_DmaControl &= ~0xc0000000; /* Tx Off, Rx Off */
> Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl);
> }
>
> @@ -346,14 +342,14 @@ u8 hal_get_antenna_number(struct hw_data *pHwData)
> }
>
> /* 0 : radio on; 1: radio off */
> -static u8 hal_get_hw_radio_off(struct hw_data * pHwData)
> +static u8 hal_get_hw_radio_off(struct hw_data *pHwData)
> {
> struct wb35_reg *reg = &pHwData->reg;
>
> if (pHwData->SurpriseRemove)
> return 1;
>
> - //read the bit16 of register U1B0
> + /* read the bit16 of register U1B0 */
> Wb35Reg_Read(pHwData, 0x3b0, ®->U1B0);
> if ((reg->U1B0 & 0x00010000)) {
> pHwData->CurrentRadioHw = 1;
> @@ -387,104 +383,98 @@ static void hal_led_control(unsigned long data)
>
> if (pHwData->LED_control) {
> ltmp2 = pHwData->LED_control & 0xff;
> - if (ltmp2 == 5) // 5 is WPS mode
> - {
> + if (ltmp2 == 5) { /* 5 is WPS mode */
> TimeInterval = 100;
> ltmp2 = (pHwData->LED_control >> 8) & 0xff;
> switch (ltmp2) {
> - case 1: // [0.2 On][0.1 Off]...
> + case 1: /* [0.2 On][0.1 Off]... */
> pHwData->LED_Blinking %= 3;
> - ltmp = 0x1010; // Led 1 & 0 Green and Red
> - if (pHwData->LED_Blinking == 2) // Turn off
> + ltmp = 0x1010; /* Led 1 & 0 Green and Red */
> + if (pHwData->LED_Blinking == 2) /* Turn off */
> ltmp = 0;
> break;
> - case 2: // [0.1 On][0.1 Off]...
> + case 2: /* [0.1 On][0.1 Off]... */
> pHwData->LED_Blinking %= 2;
> - ltmp = 0x0010; // Led 0 red color
> - if (pHwData->LED_Blinking) // Turn off
> + ltmp = 0x0010; /* Led 0 red color */
> + if (pHwData->LED_Blinking) /* Turn off */
> ltmp = 0;
> break;
> - case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
> + case 3: /* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */
> pHwData->LED_Blinking %= 15;
> - ltmp = 0x0010; // Led 0 red color
> - if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) // Turn off 0.6 sec
> + ltmp = 0x0010; /* Led 0 red color */
> + if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */
> ltmp = 0;
> break;
> - case 4: // [300 On][ off ]
> - ltmp = 0x1000; // Led 1 Green color
> + case 4: /* [300 On][ off ] */
> + ltmp = 0x1000; /* Led 1 Green color */
> if (pHwData->LED_Blinking >= 3000)
> - ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
> + ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */
> break;
> }
> pHwData->LED_Blinking++;
>
> reg->U1BC_LEDConfigure = ltmp;
> - if (LEDSet != 7) // Only 111 mode has 2 LEDs on PCB.
> - {
> - reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; // Copy LED result to each LED control register
> + if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */
> + reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */
> reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
> }
> Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
> }
> - } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) // If radio off
> - {
> + } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */
> if (reg->U1BC_LEDConfigure & 0x1010) {
> reg->U1BC_LEDConfigure &= ~0x1010;
> Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
> }
> } else {
> switch (LEDSet) {
> - case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
> - if (!pHwData->LED_LinkOn) // Blink only if not Link On
> - {
> - // Blinking if scanning is on progress
> + case 4: /* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
> + if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> + /* Blinking if scanning is on progress */
> if (pHwData->LED_Scanning) {
> if (pHwData->LED_Blinking == 0) {
> reg->U1BC_LEDConfigure |= 0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */
> pHwData->LED_Blinking = 1;
> TimeInterval = 300;
> } else {
> reg->U1BC_LEDConfigure &= ~0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> pHwData->LED_Blinking = 0;
> TimeInterval = 300;
> }
> } else {
> - //Turn Off LED_0
> + /* Turn Off LED_0 */
> if (reg->U1BC_LEDConfigure & 0x10) {
> reg->U1BC_LEDConfigure &= ~0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> }
> }
> } else {
> - // Turn On LED_0
> + /* Turn On LED_0 */
> if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
> reg->U1BC_LEDConfigure |= 0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> }
> }
> break;
> -
> - case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
> - if (!pHwData->LED_LinkOn) // Blink only if not Link On
> - {
> - // Blinking if scanning is on progress
> + case 6: /* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
> + if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> + /* Blinking if scanning is on progress */
> if (pHwData->LED_Scanning) {
> if (pHwData->LED_Blinking == 0) {
> reg->U1BC_LEDConfigure &= ~0xf;
> reg->U1BC_LEDConfigure |= 0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */
> pHwData->LED_Blinking = 1;
> TimeInterval = 300;
> } else {
> reg->U1BC_LEDConfigure &= ~0x1f;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> pHwData->LED_Blinking = 0;
> TimeInterval = 300;
> }
> } else {
> - // 20060901 Gray blinking if in disconnect state and not scanning
> + /* Gray blinking if in disconnect state and not scanning */
> ltmp = reg->U1BC_LEDConfigure;
> reg->U1BC_LEDConfigure &= ~0x1f;
> if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
> @@ -494,85 +484,78 @@ static void hal_led_control(unsigned long data)
> }
> pHwData->LED_Blinking++;
> if (reg->U1BC_LEDConfigure != ltmp)
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> TimeInterval = 100;
> }
> } else {
> - // Turn On LED_0
> + /* Turn On LED_0 */
> if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
> reg->U1BC_LEDConfigure |= 0x10;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
> }
> }
> break;
> -
> - case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
> - if (!pHwData->LED_LinkOn) // Blink only if not Link On
> - {
> - // Blinking if scanning is on progress
> + case 5: /* [101] Only 1 Led be placed on PCB and use LED_1 for showing */
> + if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
> + /* Blinking if scanning is on progress */
> if (pHwData->LED_Scanning) {
> if (pHwData->LED_Blinking == 0) {
> - reg->U1BC_LEDConfigure |=
> - 0x1000;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
> + reg->U1BC_LEDConfigure |= 0x1000;
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
> pHwData->LED_Blinking = 1;
> TimeInterval = 300;
> } else {
> - reg->U1BC_LEDConfigure &=
> - ~0x1000;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
> + reg->U1BC_LEDConfigure &= ~0x1000;
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */
> pHwData->LED_Blinking = 0;
> TimeInterval = 300;
> }
> } else {
> - //Turn Off LED_1
> + /* Turn Off LED_1 */
> if (reg->U1BC_LEDConfigure & 0x1000) {
> - reg->U1BC_LEDConfigure &=
> - ~0x1000;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
> + reg->U1BC_LEDConfigure &= ~0x1000;
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */
> }
> }
> } else {
> - // Is transmitting/receiving ??
> + /* Is transmitting/receiving ?? */
> if ((adapter->RxByteCount !=
> pHwData->RxByteCountLast)
> || (adapter->TxByteCount !=
> pHwData->TxByteCountLast)) {
> if ((reg->U1BC_LEDConfigure & 0x3000) !=
> 0x3000) {
> - reg->U1BC_LEDConfigure |=
> - 0x3000;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
> + reg->U1BC_LEDConfigure |= 0x3000;
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
> }
> - // Update variable
> + /* Update variable */
> pHwData->RxByteCountLast =
> adapter->RxByteCount;
> pHwData->TxByteCountLast =
> adapter->TxByteCount;
> TimeInterval = 200;
> } else {
> - // Turn On LED_1 and blinking if transmitting/receiving
> + /* Turn On LED_1 and blinking if transmitting/receiving */
> if ((reg->U1BC_LEDConfigure & 0x3000) !=
> 0x1000) {
> reg->U1BC_LEDConfigure &=
> ~0x3000;
> reg->U1BC_LEDConfigure |=
> 0x1000;
> - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
> + Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
> }
> }
> }
> break;
> -
> - default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
> + default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */
> if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
> - reg->U1BC_LEDConfigure |= 0x3000; // LED_1 is always on and event enable
> + reg->U1BC_LEDConfigure |= 0x3000; /* LED_1 is always on and event enable */
> Wb35Reg_Write(pHwData, 0x03bc,
> reg->U1BC_LEDConfigure);
> }
>
> if (pHwData->LED_Blinking) {
> - // Gray blinking
> + /* Gray blinking */
> reg->U1BC_LEDConfigure &= ~0x0f;
> reg->U1BC_LEDConfigure |= 0x10;
> reg->U1BC_LEDConfigure |=
> @@ -584,7 +567,7 @@ static void hal_led_control(unsigned long data)
> if (pHwData->LED_Blinking < 40)
> TimeInterval = 100;
> else {
> - pHwData->LED_Blinking = 0; // Stop blinking
> + pHwData->LED_Blinking = 0; /* Stop blinking */
> reg->U1BC_LEDConfigure &= ~0x0f;
> Wb35Reg_Write(pHwData, 0x03bc,
> reg->U1BC_LEDConfigure);
> @@ -593,16 +576,14 @@ static void hal_led_control(unsigned long data)
> }
>
> if (pHwData->LED_LinkOn) {
> - if (!(reg->U1BC_LEDConfigure & 0x10)) // Check the LED_0
> - {
> - //Try to turn ON LED_0 after gray blinking
> + if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */
> + /* Try to turn ON LED_0 after gray blinking */
> reg->U1BC_LEDConfigure |= 0x10;
> - pHwData->LED_Blinking = 1; //Start blinking
> + pHwData->LED_Blinking = 1; /* Start blinking */
> TimeInterval = 50;
> }
> } else {
> - if (reg->U1BC_LEDConfigure & 0x10) // Check the LED_0
> - {
> + if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */
> reg->U1BC_LEDConfigure &= ~0x10;
> Wb35Reg_Write(pHwData, 0x03bc,
> reg->U1BC_LEDConfigure);
> @@ -611,7 +592,7 @@ static void hal_led_control(unsigned long data)
> break;
> }
>
> - //20060828.1 Active send null packet to avoid AP disconnect
> + /* Active send null packet to avoid AP disconnect */
> if (pHwData->LED_LinkOn) {
> pHwData->NullPacketCount += TimeInterval;
> if (pHwData->NullPacketCount >=
> @@ -622,7 +603,7 @@ static void hal_led_control(unsigned long data)
> }
>
> pHwData->time_count += TimeInterval;
> - Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
> + Wb35Tx_CurrentTime(adapter, pHwData->time_count);
> pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
> add_timer(&pHwData->LEDTimer);
> }
> @@ -654,7 +635,7 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
> SoftwareSet = hal_software_set(pHwData);
>
> #ifdef Vendor2
> - // Try to make sure the EEPROM contain
> + /* Try to make sure the EEPROM contain */
> SoftwareSet >>= 8;
> if (SoftwareSet != 0x82)
> return false;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists