| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1270506118.2790.152.camel@mulgrave.site>
Date: Mon, 05 Apr 2010 17:21:58 -0500
From: James Bottomley <James.Bottomley@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PATCH] SCSI bug fixes for 2.6.34-rc3
This is the first round of bug fixes ... accidentally got incubated a
bit longer than I expected in -next. Mainly qla vport issues, but some
notable ones (including the lockdep problem with all the transport
classes).
Patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
The short changelog is
Andrew Vasquez (1):
qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.
Ben Hutchings (1):
qla2xxx: Disable MSI on qla24xx chips other than QLA2432.
Giridhar Malavali (1):
qla2xxx: Updated version number to 8.03.02-k2.
Herton Ronaldo Krzesinski (1):
advansys: fix regression with request_firmware change
James Bottomley (1):
attirbute_container: Initialize sysfs attributes with sysfs_attr_init
Michael Hernandez (1):
qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.
Michael Reed (1):
qla1280: retain firmware for error recovery
Mike Christie (1):
libiscsi: Fix recovery slowdown regression
Santosh Vernekar (2):
qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
qla2xxx: Honour "Extended BB credits" bit for CNAs.
Sarang Radke (1):
scsi_transport_fc: Make sure commands are completed when rport is offline
And the diffstat
drivers/base/attribute_container.c | 1
drivers/scsi/advansys.c | 8 +
drivers/scsi/libiscsi.c | 5 -
drivers/scsi/qla1280.c | 161 +++++++++++++++++++++++++------------
drivers/scsi/qla2xxx/qla_attr.c | 6 +
drivers/scsi/qla2xxx/qla_fw.h | 18 +++-
drivers/scsi/qla2xxx/qla_isr.c | 37 +++-----
drivers/scsi/qla2xxx/qla_mbx.c | 8 +
drivers/scsi/qla2xxx/qla_os.c | 4
drivers/scsi/qla2xxx/qla_version.h | 4
drivers/scsi/scsi_transport_fc.c | 4
11 files changed, 172 insertions(+), 84 deletions(-)
The full diff is attached.
James
---
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index b9cda05..8fc200b 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -328,6 +328,7 @@ attribute_container_add_attrs(struct device *classdev)
return sysfs_create_group(&classdev->kobj, cont->grp);
for (i = 0; attrs[i]; i++) {
+ sysfs_attr_init(&attrs[i]->attr);
error = device_create_file(classdev, attrs[i]);
if (error)
return error;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 22626ab..9201afe 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4781,12 +4781,14 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -5110,12 +5112,14 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -5624,12 +5628,14 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@@ -6124,12 +6130,14 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 685eaec..7688b8f 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3087,14 +3087,15 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
+
+ old_stop_stage = conn->stop_stage;
+ conn->stop_stage = flag;
spin_unlock_bh(&session->lock);
del_timer_sync(&conn->transport_timer);
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
- old_stop_stage = conn->stop_stage;
- conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
spin_unlock_bh(&session->lock);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 49ac414..66e2dd4 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,11 @@
* General Public License for more details.
*
******************************************************************************/
-#define QLA1280_VERSION "3.27"
+#define QLA1280_VERSION "3.27.1"
/*****************************************************************************
Revision History:
+ Rev 3.27.1, February 8, 2010, Michael Reed
+ - Retain firmware image for error recovery.
Rev 3.27, February 10, 2009, Michael Reed
- General code cleanup.
- Improve error recovery.
@@ -538,9 +540,9 @@ __setup("qla1280=", qla1280_setup);
/*****************************************/
struct qla_boards {
- unsigned char name[9]; /* Board ID String */
+ char *name; /* Board ID String */
int numPorts; /* Number of SCSI ports */
- char *fwname; /* firmware name */
+ int fw_index; /* index into qla1280_fw_tbl for firmware */
};
/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@@ -561,15 +563,30 @@ static struct pci_device_id qla1280_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
+DEFINE_MUTEX(qla1280_firmware_mutex);
+
+struct qla_fw {
+ char *fwname;
+ const struct firmware *fw;
+};
+
+#define QL_NUM_FW_IMAGES 3
+
+struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
+ {"qlogic/1040.bin", NULL}, /* image 0 */
+ {"qlogic/1280.bin", NULL}, /* image 1 */
+ {"qlogic/12160.bin", NULL}, /* image 2 */
+};
+
+/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
static struct qla_boards ql1280_board_tbl[] = {
- /* Name , Number of ports, FW details */
- {"QLA12160", 2, "qlogic/12160.bin"},
- {"QLA1040", 1, "qlogic/1040.bin"},
- {"QLA1080", 1, "qlogic/1280.bin"},
- {"QLA1240", 2, "qlogic/1280.bin"},
- {"QLA1280", 2, "qlogic/1280.bin"},
- {"QLA10160", 1, "qlogic/12160.bin"},
- {" ", 0, " "},
+ {.name = "QLA12160", .numPorts = 2, .fw_index = 2},
+ {.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
+ {.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
+ {.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
+ {.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
+ {.name = "QLA10160", .numPorts = 1, .fw_index = 2},
+ {.name = " ", .numPorts = 0, .fw_index = -1},
};
static int qla1280_verbose = 1;
@@ -1512,6 +1529,63 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
}
/*
+ * qla1280_request_firmware
+ * Acquire firmware for chip. Retain in memory
+ * for error recovery.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * Pointer to firmware image or an error code
+ * cast to pointer via ERR_PTR().
+ */
+static const struct firmware *
+qla1280_request_firmware(struct scsi_qla_host *ha)
+{
+ const struct firmware *fw;
+ int err;
+ int index;
+ char *fwname;
+
+ spin_unlock_irq(ha->host->host_lock);
+ mutex_lock(&qla1280_firmware_mutex);
+
+ index = ql1280_board_tbl[ha->devnum].fw_index;
+ fw = qla1280_fw_tbl[index].fw;
+ if (fw)
+ goto out;
+
+ fwname = qla1280_fw_tbl[index].fwname;
+ err = request_firmware(&fw, fwname, &ha->pdev->dev);
+
+ if (err) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ fwname, err);
+ fw = ERR_PTR(err);
+ goto unlock;
+ }
+ if ((fw->size % 2) || (fw->size < 6)) {
+ printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
+ fw->size, fwname);
+ release_firmware(fw);
+ fw = ERR_PTR(-EINVAL);
+ goto unlock;
+ }
+
+ qla1280_fw_tbl[index].fw = fw;
+
+ out:
+ ha->fwver1 = fw->data[0];
+ ha->fwver2 = fw->data[1];
+ ha->fwver3 = fw->data[2];
+ unlock:
+ mutex_unlock(&qla1280_firmware_mutex);
+ spin_lock_irq(ha->host->host_lock);
+ return fw;
+}
+
+/*
* Chip diagnostics
* Test chip for proper operation.
*
@@ -1634,30 +1708,18 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
static int
qla1280_load_firmware_pio(struct scsi_qla_host *ha)
{
+ /* enter with host_lock acquired */
+
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
- int err;
+ int err = 0;
+
+ fw = qla1280_request_firmware(ha);
+ if (IS_ERR(fw))
+ return PTR_ERR(fw);
- spin_unlock_irq(ha->host->host_lock);
- err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
- &ha->pdev->dev);
- spin_lock_irq(ha->host->host_lock);
- if (err) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
- ql1280_board_tbl[ha->devnum].fwname, err);
- return err;
- }
- if ((fw->size % 2) || (fw->size < 6)) {
- printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
- fw->size, ql1280_board_tbl[ha->devnum].fwname);
- err = -EINVAL;
- goto out;
- }
- ha->fwver1 = fw->data[0];
- ha->fwver2 = fw->data[1];
- ha->fwver3 = fw->data[2];
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
@@ -1675,11 +1737,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
ha->host_no);
- goto out;
+ break;
}
}
-out:
- release_firmware(fw);
+
return err;
}
@@ -1687,6 +1748,7 @@ out:
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
{
+ /* enter with host_lock acquired */
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
@@ -1701,24 +1763,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
return -ENOMEM;
#endif
- spin_unlock_irq(ha->host->host_lock);
- err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
- &ha->pdev->dev);
- spin_lock_irq(ha->host->host_lock);
- if (err) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
- ql1280_board_tbl[ha->devnum].fwname, err);
- return err;
- }
- if ((fw->size % 2) || (fw->size < 6)) {
- printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
- fw->size, ql1280_board_tbl[ha->devnum].fwname);
- err = -EINVAL;
- goto out;
- }
- ha->fwver1 = fw->data[0];
- ha->fwver2 = fw->data[1];
- ha->fwver3 = fw->data[2];
+ fw = qla1280_request_firmware(ha);
+ if (IS_ERR(fw))
+ return PTR_ERR(fw);
+
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
@@ -1803,7 +1851,6 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#if DUMP_IT_BACK
pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
#endif
- release_firmware(fw);
return err;
}
@@ -1842,6 +1889,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
static int
qla1280_load_firmware(struct scsi_qla_host *ha)
{
+ /* enter with host_lock taken */
int err;
err = qla1280_chip_diag(ha);
@@ -4420,7 +4468,16 @@ qla1280_init(void)
static void __exit
qla1280_exit(void)
{
+ int i;
+
pci_unregister_driver(&qla1280_pci_driver);
+ /* release any allocated firmware images */
+ for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
+ if (qla1280_fw_tbl[i].fw) {
+ release_firmware(qla1280_fw_tbl[i].fw);
+ qla1280_fw_tbl[i].fw = NULL;
+ }
+ }
}
module_init(qla1280_init);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e06..35a3252 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1274,7 +1274,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- if (!vha->hw->flags.eeh_busy)
+ if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
+ __func__, vha->host_no));
+ else if (!vha->hw->flags.eeh_busy)
rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index cebf4f1..42c5587 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1592,10 +1592,22 @@ struct nvram_81xx {
/* Offset 384. */
uint8_t reserved_21[16];
- uint16_t reserved_22[8];
+ uint16_t reserved_22[3];
+
+ /*
+ * BIT 0 = Extended BB credits for LR
+ * BIT 1 = Virtual Fabric Enable
+ * BIT 2 = Enhanced Features Unused
+ * BIT 3-7 = Enhanced Features Reserved
+ */
+ /* Enhanced Features */
+ uint8_t enhanced_features;
+
+ uint8_t reserved_23;
+ uint16_t reserved_24[4];
/* Offset 416. */
- uint16_t reserved_23[32];
+ uint16_t reserved_25[32];
/* Offset 480. */
uint8_t model_name[16];
@@ -1603,7 +1615,7 @@ struct nvram_81xx {
/* Offset 496. */
uint16_t feature_mask_l;
uint16_t feature_mask_h;
- uint16_t reserved_24[2];
+ uint16_t reserved_26[2];
uint16_t subsystem_vendor_id;
uint16_t subsystem_device_id;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ab90329..44df0b7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -620,11 +620,10 @@ skip_rio:
* vp_idx does not match
* Event is not global, vp_idx does not match
*/
- if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff)
- || (mb[1] != 0xffff)) {
- if (vha->vp_idx != (mb[3] & 0xff))
- break;
- }
+ if (IS_QLA2XXX_MIDTYPE(ha) &&
+ ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
+ (mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
+ break;
/* Global event -- port logout or port unavailable. */
if (mb[1] == 0xffff && mb[2] == 0x7) {
@@ -2272,30 +2271,28 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
/* If possible, enable MSI-X. */
if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
- !IS_QLA8432(ha) && !IS_QLA8001(ha))
- goto skip_msix;
+ !IS_QLA8432(ha) && !IS_QLA8001(ha))
+ goto skip_msi;
+
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+ (ha->pdev->subsystem_device == 0x7040 ||
+ ha->pdev->subsystem_device == 0x7041 ||
+ ha->pdev->subsystem_device == 0x1705)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n",
+ ha->pdev->subsystem_vendor,
+ ha->pdev->subsystem_device));
+ goto skip_msi;
+ }
if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
ha->pdev->revision, ha->fw_attributes));
-
goto skip_msix;
}
- if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
- (ha->pdev->subsystem_device == 0x7040 ||
- ha->pdev->subsystem_device == 0x7041 ||
- ha->pdev->subsystem_device == 0x1705)) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
- ha->pdev->subsystem_vendor,
- ha->pdev->subsystem_device));
-
- goto skip_msi;
- }
-
ret = qla24xx_enable_msix(ha, rsp);
if (!ret) {
DEBUG2(qla_printk(KERN_INFO, ha,
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6e53bdb..3ba9a2b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -339,6 +339,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr,
return rval;
}
+#define EXTENDED_BB_CREDITS BIT_0
/*
* qla2x00_execute_fw
* Start adapter firmware.
@@ -371,7 +372,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
mcp->mb[1] = MSW(risc_addr);
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
- mcp->mb[4] = 0;
+ if (IS_QLA81XX(ha)) {
+ struct nvram_81xx *nv = ha->nvram;
+ mcp->mb[4] = (nv->enhanced_features &
+ EXTENDED_BB_CREDITS);
+ } else
+ mcp->mb[4] = 0;
mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
mcp->in_mb |= MBX_1;
} else {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b2..be3f1d3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1676,9 +1676,11 @@ skip_pio:
/* Determine queue resources */
ha->max_req_queues = ha->max_rsp_queues = 1;
- if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+ if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) ||
+ (ql2xmaxqueues > 1 && ql2xmultique_tag) ||
(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
+
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
if (ha->mqiobase) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8d2fc2f..109068d 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.02-k1"
+#define QLA2XXX_VERSION "8.03.02-k2"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#define QLA_DRIVER_PATCH_VER 2
-#define QLA_DRIVER_BETA_VER 1
+#define QLA_DRIVER_BETA_VER 2
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 1d5b721..e37aeeb 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3852,7 +3852,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
if (rport && (rport->port_state != FC_PORTSTATE_ONLINE)) {
req->errors = -ENXIO;
spin_unlock_irq(q->queue_lock);
- blk_end_request(req, -ENXIO, blk_rq_bytes(req));
+ blk_end_request_all(req, -ENXIO);
spin_lock_irq(q->queue_lock);
continue;
}
@@ -3862,7 +3862,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
ret = fc_req_to_bsgjob(shost, rport, req);
if (ret) {
req->errors = ret;
- blk_end_request(req, ret, blk_rq_bytes(req));
+ blk_end_request_all(req, ret);
spin_lock_irq(q->queue_lock);
continue;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists