| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201004061141.o36BfTsr028163@amcc.com>
Date: Tue, 6 Apr 2010 17:11:29 +0530
From: Rupjyoti Sarmah <rsarmah@...c.com>
To: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: rsarmah@...c.com, jgarzik@...ox.com, sr@...x.de,
linuxppc-dev@...abs.org
Subject: [PATCH] 460EX on-chip SATA driver<kernel 2.6.33> < resubmission : 02>
This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX.
Signed-off-by: Rupjyoti Sarmah <rsarmah@...liedmicro.com>
Signed-off-by: Mark Miesfeld <mmiesfeld@...liedmicro.com>
Signed-off-by: Prodyut Hazarika <phazarika@...liedmicro.com>
---
arch/powerpc/boot/dts/canyonlands.dts | 8 +
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/sata_dwc.c | 1965 +++++++++++++++++++++++++++++++++
4 files changed, 1983 insertions(+), 0 deletions(-)
create mode 100644 drivers/ata/sata_dwc.c
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5..d3b2c99 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -163,6 +163,14 @@
interrupts = <0x1e 4>;
};
+ SATA0: sata@...d1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x0 0x4 /* SATA */
+ 0x5 0x4>; /* AHBDMA */
+ };
+
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 56c6374..bba7b8a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -82,6 +82,15 @@ config SATA_FSL
If unsure, say N.
+config SATA_DWC
+ tristate "DesignWare Cores SATA support"
+ depends on 460EX
+ help
+ This option enables support for the on-chip SATA controller of the
+ AppliedMicro processor 460EX.
+
+ If unsure, say N.
+
config ATA_SFF
bool "ATA SFF support"
default y
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index fc936d4..0de7a33 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_SATA_DWC) += sata_dwc.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
diff --git a/drivers/ata/sata_dwc.c b/drivers/ata/sata_dwc.c
new file mode 100644
index 0000000..28c227e
--- /dev/null
+++ b/drivers/ata/sata_dwc.c
@@ -0,0 +1,1965 @@
+/*
+ * drivers/ata/sata_dwc.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@...liedmicro.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@...x.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ * Copyright 2006 Applied Micro Circuits Corporation
+ * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef CONFIG_SATA_DWC_DEBUG
+#define DEBUG
+#endif
+
+#ifdef CONFIG_SATA_DWC_VDEBUG
+#define VERBOSE_DEBUG
+#define DEBUG_NCQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/libata.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+
+#define DRV_NAME "sata-dwc"
+#define DRV_VERSION "1.0"
+
+/* SATA DMA driver Globals */
+#define DMA_NUM_CHANS 1
+#define DMA_NUM_CHAN_REGS 8
+
+/* SATA DMA Register definitions */
+#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */
+
+struct dmareg {
+ u32 low; /* Low bits 0-31 */
+ u32 high; /* High bits 32-63 */
+};
+
+/* DMA Per Channel registers */
+
+struct dma_chan_regs {
+ struct dmareg sar; /* Source Address */
+ struct dmareg dar; /* Destination address */
+ struct dmareg llp; /* Linked List Pointer */
+ struct dmareg ctl; /* Control */
+ struct dmareg sstat; /* Source Status not implemented in core */
+ struct dmareg dstat; /* DestinationStatus not implemented in core */
+ struct dmareg sstatar; /* Source Status Address not impl in core */
+ struct dmareg dstatar; /* DestinationStatus Address not implemented */
+ struct dmareg cfg; /* Config */
+ struct dmareg sgr; /* Source Gather */
+ struct dmareg dsr; /* Destination Scatter */
+};
+
+/* Generic Interrupt Registers */
+struct dma_interrupt_regs {
+ struct dmareg tfr; /* Transfer Interrupt */
+ struct dmareg block; /* Block Interrupt */
+ struct dmareg srctran; /* Source Transfer Interrupt */
+ struct dmareg dsttran; /* Dest Transfer Interrupt */
+ struct dmareg error; /* Error */
+};
+
+struct ahb_dma_regs {
+ struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS];/* channel reg */
+ struct dma_interrupt_regs interrupt_raw; /* Raw Interrupt */
+ struct dma_interrupt_regs interrupt_status; /* Interrupt Status */
+ struct dma_interrupt_regs interrupt_mask; /* Interrupt Mask */
+ struct dma_interrupt_regs interrupt_clear; /* Interrupt Clear */
+ struct dmareg statusInt; /* Interrupt combined */
+ struct dmareg rq_srcreg; /* Src Trans Req */
+ struct dmareg rq_dstreg; /* Dst Trans Req */
+ struct dmareg rq_sgl_srcreg; /* Sngl Src Trans Req */
+ struct dmareg rq_sgl_dstreg; /* Sngl Dst Trans Req */
+ struct dmareg rq_lst_srcreg; /* Last Src Trans Req */
+ struct dmareg rq_lst_dstreg; /* Last Dst Trans Req */
+ struct dmareg dma_cfg; /* DMA Config */
+ struct dmareg dma_chan_en; /* DMA Channel Enable */
+ struct dmareg dma_id; /* DMA ID */
+ struct dmareg dma_test; /* DMA Test */
+ struct dmareg res1; /* reserved */
+ struct dmareg res2; /* reserved */
+
+ /* DMA Comp Params
+ * Param 6 = dma_param[0], Param 5 = dma_param[1],
+ * Param 4 = dma_param[2] ...
+ */
+ struct dmareg dma_params[6];
+};
+
+/* Data structure for linked list item */
+struct lli {
+ u32 sar; /* Source Address */
+ u32 dar; /* Destination address */
+ u32 llp; /* Linked List Pointer */
+ struct dmareg ctl; /* Control */
+ struct dmareg dstat; /* Destination Status */
+};
+
+enum {
+ SATA_DWC_DMAC_LLI_SZ = (sizeof(struct lli)),
+ SATA_DWC_DMAC_LLI_NUM = 256,
+ SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
+ SATA_DWC_DMAC_LLI_NUM),
+ SATA_DWC_DMAC_TWIDTH_BYTES = 4,
+ SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
+ SATA_DWC_DMAC_TWIDTH_BYTES),
+};
+
+/* DMA Register Operation Bits */
+
+enum {
+ DMA_EN = 0x00000001, /* Enable AHB DMA */
+ /* Control Register */
+
+ DMA_CTL_LLP_SRCEN = 0x10000000, /* Blk chain enable Src */
+ DMA_CTL_LLP_DSTEN = 0x08000000, /* Blk chain enable Dst */
+};
+
+#define DMA_CTL_BLK_TS(size) ((size) & 0x000000FFF) /* Blk Transfer size */
+#define DMA_CHANNEL(ch) (0x00000001 << (ch)) /* Select channel */
+ /* Enable channel */
+#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \
+ ((0x000000001 << (ch)) << 8))
+ /* Disable channel */
+#define DMA_DISABLE_CHAN(ch) (0x00000000 | ((0x000000001 << (ch)) << 8))
+ /* Transfer Type & Flow Controller */
+#define DMA_CTL_TTFC(type) (((type) & 0x7) << 20)
+#define DMA_CTL_SMS(num) (((num) & 0x3) << 25) /* Src Master Select */
+#define DMA_CTL_DMS(num) (((num) & 0x3) << 23)/* Dst Master Select */
+ /* Src Burst Transaction Length */
+#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
+ /* Dst Burst Transaction Length */
+#define DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
+ /* Source Transfer Width */
+#define DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
+ /* Destination Transfer Width */
+#define DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
+
+/* Assign HW handshaking interface (x) to destination / source peripheral */
+#define DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
+#define DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
+#define DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
+
+/*
+ * This define is used to set block chaining disabled in the control low
+ * register. It is already in little endian format so it can be &'d dirctly.
+ * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
+ */
+enum {
+ DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
+ DMA_CTL_TTFC_P2M_DMAC = 0x00000002, /* Per to mem, DMAC cntr */
+ DMA_CTL_TTFC_M2P_PER = 0x00000003, /* Mem to per, peripheral cntr */
+ DMA_CTL_SINC_INC = 0x00000000, /* Source Address Increment */
+ DMA_CTL_SINC_DEC = 0x00000200,
+ DMA_CTL_SINC_NOCHANGE = 0x00000400,
+ DMA_CTL_DINC_INC = 0x00000000, /* Destination Address Increment */
+ DMA_CTL_DINC_DEC = 0x00000080,
+ DMA_CTL_DINC_NOCHANGE = 0x00000100,
+ DMA_CTL_INT_EN = 0x00000001, /* Interrupt Enable */
+
+/* Channel Configuration Register high bits */
+ DMA_CFG_FCMOD_REQ = 0x00000001, /* Flow Control - request based */
+ DMA_CFG_PROTCTL = (0x00000003 << 2),/* Protection Control */
+
+/* Channel Configuration Register low bits */
+ DMA_CFG_RELD_DST = 0x80000000, /* Reload Dest / Src Addr */
+ DMA_CFG_RELD_SRC = 0x40000000,
+ DMA_CFG_HS_SELSRC = 0x00000800, /* Software handshake Src/ Dest */
+ DMA_CFG_HS_SELDST = 0x00000400,
+ DMA_CFG_FIFOEMPTY = (0x00000001 << 9), /* FIFO Empty bit */
+
+
+/* Channel Linked List Pointer Register */
+
+ DMA_LLP_AHBMASTER1 = 0, /* List Master Select */
+ DMA_LLP_AHBMASTER2 = 1,
+
+ SATA_DWC_MAX_PORTS = 1,
+
+ SATA_DWC_SCR_OFFSET = 0x24,
+ SATA_DWC_REG_OFFSET = 0x64,
+
+};
+
+/* DWC SATA Registers */
+struct sata_dwc_regs {
+ u32 fptagr; /* 1st party DMA tag */
+ u32 fpbor; /* 1st party DMA buffer offset */
+ u32 fptcr; /* 1st party DMA Xfr count */
+ u32 dmacr; /* DMA Control */
+ u32 dbtsr; /* DMA Burst Transac size */
+ u32 intpr; /* Interrupt Pending */
+ u32 intmr; /* Interrupt Mask */
+ u32 errmr; /* Error Mask */
+ u32 llcr; /* Link Layer Control */
+ u32 phycr; /* PHY Control */
+ u32 physr; /* PHY Status */
+ u32 rxbistpd; /* Recvd BIST pattern def register */
+ u32 rxbistpd1; /* Recvd BIST data dword1 */
+ u32 rxbistpd2; /* Recvd BIST pattern data dword2 */
+ u32 txbistpd; /* Trans BIST pattern def register */
+ u32 txbistpd1; /* Trans BIST data dword1 */
+ u32 txbistpd2; /* Trans BIST data dword2 */
+ u32 bistcr; /* BIST Control Register */
+ u32 bistfctr; /* BIST FIS Count Register */
+ u32 bistsr; /* BIST Status Register */
+ u32 bistdecr; /* BIST Dword Error count register */
+ u32 res[15]; /* Reserved locations */
+ u32 testr; /* Test Register */
+ u32 versionr; /* Version Register */
+ u32 idr; /* ID Register */
+ u32 unimpl[192]; /* Unimplemented */
+ u32 dmadr[256]; /* FIFO Locations in DMA Mode */
+};
+
+enum {
+ SCR_SCONTROL_DET_ENABLE = 0x00000001,
+ SCR_SSTATUS_DET_PRESENT = 0x00000001,
+ SCR_SERROR_DIAG_X = 0x04000000,
+
+/* DWC SATA Register Operations */
+ SATA_DWC_TXFIFO_DEPTH = 0x01FF,
+ SATA_DWC_RXFIFO_DEPTH = 0x01FF,
+
+ SATA_DWC_DMACR_TMOD_TXCHEN = 0x00000004,
+ SATA_DWC_DMACR_TXCHEN = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN),
+ SATA_DWC_DMACR_RXCHEN = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN),
+
+ SATA_DWC_DMACR_TXRXCH_CLEAR = SATA_DWC_DMACR_TMOD_TXCHEN,
+
+
+ SATA_DWC_INTPR_DMAT = 0x00000001,
+ SATA_DWC_INTPR_NEWFP = 0x00000002,
+ SATA_DWC_INTPR_PMABRT = 0x00000004,
+ SATA_DWC_INTPR_ERR = 0x00000008,
+ SATA_DWC_INTPR_NEWBIST = 0x00000010,
+ SATA_DWC_INTPR_IPF = 0x10000000,
+ SATA_DWC_INTMR_DMATM = 0x00000001,
+ SATA_DWC_INTMR_NEWFPM = 0x00000002,
+ SATA_DWC_INTMR_PMABRTM = 0x00000004,
+ SATA_DWC_INTMR_ERRM = 0x00000008,
+ SATA_DWC_INTMR_NEWBISTM = 0x00000010,
+ SATA_DWC_LLCR_SCRAMEN = 0x00000001,
+ SATA_DWC_LLCR_DESCRAMEN = 0x00000002,
+ SATA_DWC_LLCR_RPDEN = 0x00000004,
+
+/* This is all error bits, zero's are reserved fields. */
+ SATA_DWC_SERROR_ERR_BITS = 0x0FFF0F03
+
+};
+
+#define SATA_DWC_SCR0_SPD_GET(v) (((v) >> 4) & 0x0000000F)
+#define SATA_DWC_DMACR_TX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_TXCHEN) |\
+ SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_RX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_RXCHEN) |\
+ SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DBTSR_MWR(size) (((size)/4) & SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size) ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\
+ << 16)
+
+
+struct sata_dwc_device {
+ struct device *dev; /* generic device struct */
+ struct ata_probe_ent *pe; /* ptr to probe-ent */
+ struct ata_host *host;
+ u8 *reg_base;
+ struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
+ int irq_dma;
+};
+
+#define SATA_DWC_QCMD_MAX 32
+
+struct sata_dwc_device_port {
+ struct sata_dwc_device *hsdev;
+ int cmd_issued[SATA_DWC_QCMD_MAX];
+ struct lli *llit[SATA_DWC_QCMD_MAX];
+ dma_addr_t llit_dma[SATA_DWC_QCMD_MAX];
+ u32 dma_chan[SATA_DWC_QCMD_MAX];
+ int dma_pending[SATA_DWC_QCMD_MAX];
+};
+
+/*
+ * Commonly used DWC SATA driver Macros
+ */
+#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\
+ (host)->private_data)
+#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\
+ (ap)->host->private_data)
+#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\
+ (ap)->private_data)
+#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\
+ (qc)->ap->host->private_data)
+#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\
+ (hsdevp)->hsdev)
+
+enum {
+ SATA_DWC_CMD_ISSUED_NOT = 0,
+ SATA_DWC_CMD_ISSUED_PEND = 1,
+ SATA_DWC_CMD_ISSUED_EXEC = 2,
+ SATA_DWC_CMD_ISSUED_NODATA = 3,
+
+ SATA_DWC_DMA_PENDING_NONE = 0,
+ SATA_DWC_DMA_PENDING_TX = 1,
+ SATA_DWC_DMA_PENDING_RX = 2,
+};
+
+
+struct sata_dwc_host_priv {
+
+ void __iomem *scr_addr_sstatus;
+ u32 sata_dwc_sactive_issued;
+ u32 sata_dwc_sactive_queued;
+ u32 dma_interrupt_count;
+ struct ahb_dma_regs *sata_dma_regs;
+ struct device *dwc_dev;
+
+};
+
+struct sata_dwc_host_priv host_pvt;
+
+/*
+ * Prototypes
+ */
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u32 check_status);
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+static void sata_dwc_port_stop(struct ata_port *ap);
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
+static void dma_dwc_exit(struct sata_dwc_device *hsdev);
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+ struct lli *lli, dma_addr_t dma_lli,
+ void __iomem *addr, int dir);
+static void dma_dwc_xfer_start(int dma_ch);
+
+static const char *dir_2_txt(enum dma_data_direction dir)
+{
+ switch (dir) {
+ case DMA_BIDIRECTIONAL:
+ return "bi";
+ case DMA_FROM_DEVICE:
+ return "from";
+ case DMA_TO_DEVICE:
+ return "to";
+ case DMA_NONE:
+ return "none";
+ default:
+ return "err";
+ }
+}
+
+static const char *prot_2_txt(enum ata_tf_protocols protocol)
+{
+ switch (protocol) {
+ case ATA_PROT_UNKNOWN:
+ return "unknown";
+ case ATA_PROT_NODATA:
+ return "nodata";
+ case ATA_PROT_PIO:
+ return "pio";
+ case ATA_PROT_DMA:
+ return "dma";
+ case ATA_PROT_NCQ:
+ return "ncq";
+ case ATAPI_PROT_PIO:
+ return "atapi pio";
+ case ATAPI_PROT_NODATA:
+ return "atapi nodata";
+ case ATAPI_PROT_DMA:
+ return "atapi dma";
+ default:
+ return "err";
+ }
+}
+
+inline const char *ata_cmd_2_txt(const struct ata_taskfile *tf)
+{
+ switch (tf->command) {
+ case ATA_CMD_CHK_POWER:
+ return "ATA_CMD_CHK_POWER";
+ case ATA_CMD_EDD:
+ return "ATA_CMD_EDD";
+ case ATA_CMD_FLUSH:
+ return "ATA_CMD_FLUSH";
+ case ATA_CMD_FLUSH_EXT:
+ return "ATA_CMD_FLUSH_EXT";
+ case ATA_CMD_ID_ATA:
+ return "ATA_CMD_ID_ATA";
+ case ATA_CMD_ID_ATAPI:
+ return "ATA_CMD_ID_ATAPI";
+ case ATA_CMD_FPDMA_READ:
+ return "ATA_CMD_FPDMA_READ";
+ case ATA_CMD_FPDMA_WRITE:
+ return "ATA_CMD_FPDMA_WRITE";
+ case ATA_CMD_READ:
+ return "ATA_CMD_READ";
+ case ATA_CMD_READ_EXT:
+ return "ATA_CMD_READ_EXT";
+ case ATA_CMD_READ_NATIVE_MAX_EXT:
+ return "ATA_CMD_READ_NATIVE_MAX_EXT";
+ case ATA_CMD_VERIFY_EXT:
+ return "ATA_CMD_VERIFY_EXT";
+ case ATA_CMD_WRITE:
+ return "ATA_CMD_WRITE";
+ case ATA_CMD_WRITE_EXT:
+ return "ATA_CMD_WRITE_EXT";
+ case ATA_CMD_PIO_READ:
+ return "ATA_CMD_PIO_READ";
+ case ATA_CMD_PIO_READ_EXT:
+ return "ATA_CMD_PIO_READ_EXT";
+ case ATA_CMD_PIO_WRITE:
+ return "ATA_CMD_PIO_WRITE";
+ case ATA_CMD_PIO_WRITE_EXT:
+ return "ATA_CMD_PIO_WRITE_EXT";
+ case ATA_CMD_SET_FEATURES:
+ return "ATA_CMD_SET_FEATURES";
+ case ATA_CMD_PACKET:
+ return "ATA_CMD_PACKET";
+ default:
+ return "ATA_CMD_???";
+ }
+}
+
+static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+{
+
+ dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags: "
+ "0x%lx device: %x\n", tf->command, prot_2_txt(tf->protocol),
+ tf->flags, tf->device);
+ dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
+ "lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
+ tf->lbam, tf->lbah);
+ dev_vdbg(host_pvt.dwc_dev, "hob_feature:0x%02x hob_nsect:0x%x hob_lbal"
+ ": 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n", tf->hob_feature,
+ tf->hob_nsect, tf->hob_lbal, tf->hob_lbam, tf->hob_lbah);
+}
+/*
+ * Function: get_burst_length_encode
+ * arguments: datalength: length in bytes of data
+ * returns value to be programmed in register corrresponding to data length
+ * This value is effectively the log(base 2) of the length
+ */
+static inline int get_burst_length_encode(int datalength)
+{
+ int items = datalength >> 2; /* div by 4 to get lword count */
+
+ if (items >= 64)
+ return 5;
+
+ if (items >= 32)
+ return 4;
+
+ if (items >= 16)
+ return 3;
+
+ if (items >= 8)
+ return 2;
+
+ if (items >= 4)
+ return 1;
+
+ return 0;
+}
+
+static inline void clear_chan_interrupts(int c)
+{
+ out_le32(&host_pvt.sata_dma_regs->interrupt_clear.tfr.low,
+ DMA_CHANNEL(c));
+ out_le32(&host_pvt.sata_dma_regs->interrupt_clear.block.low,
+ DMA_CHANNEL(c));
+ out_le32(&host_pvt.sata_dma_regs->interrupt_clear.srctran.low,
+ DMA_CHANNEL(c));
+ out_le32(&host_pvt.sata_dma_regs->interrupt_clear.dsttran.low,
+ DMA_CHANNEL(c));
+ out_le32(&host_pvt.sata_dma_regs->interrupt_clear.error.low,
+ DMA_CHANNEL(c));
+}
+
+/*
+ * Function: dma_request_channel
+ * arguments: None
+ * returns channel number if available else -1
+ * This function assigns the next available DMA channel from the list to the
+ * requester
+ */
+static int dma_request_channel(void)
+{
+ int i;
+
+ for (i = 0; i < DMA_NUM_CHANS; i++) {
+ if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) & \
+ DMA_CHANNEL(i)))
+ return i;
+ }
+
+ /* warn of channel info */
+ dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__,
+ in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)));
+
+ return -1;
+}
+
+/*
+ * Function: dma_dwc_interrupt
+ * arguments: irq, dev_id, pt_regs
+ * returns channel number if available else -1
+ * Interrupt Handler for DW AHB SATA DMA
+ */
+static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
+{
+ int chan;
+ u32 tfr_reg, err_reg;
+
+ struct sata_dwc_device *hsdev =
+ (struct sata_dwc_device *) hsdev_instance;
+ struct ata_host *host = (struct ata_host *) hsdev->host;
+ struct ata_port *ap;
+ struct sata_dwc_device_port *hsdevp;
+ u8 tag = 0;
+ unsigned int port = 0;
+ struct sata_dwc_host_priv *hp;
+ hp = kmalloc(sizeof(*hp), GFP_KERNEL);
+
+ spin_lock(&host->lock);
+
+ ap = host->ports[port];
+ hsdevp = HSDEVP_FROM_AP(ap);
+ tag = ap->link.active_tag;
+
+ tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr.low));
+ err_reg = in_le32(&(host_pvt.sata_dma_regs-> \
+ interrupt_status.error.low));
+
+ dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
+ tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
+
+ for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+ /* Check for end-of-transfer interrupt. */
+ if (tfr_reg & DMA_CHANNEL(chan)) {
+ /* Each DMA command produces 2 interrupts. Only
+ * complete the command after both interrupts have been
+ * seen. (See sata_dwc_isr())
+ */
+ hp->dma_interrupt_count++;
+
+ sata_dwc_clear_dmacr(hsdevp, tag);
+
+ if (hsdevp->dma_pending[tag] ==
+ SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "DMA not pending eot=0x%08x "
+ "err=0x%08x tag=0x%02x pending=%d\n",
+ tfr_reg, err_reg, tag,
+ hsdevp->dma_pending[tag]);
+ }
+
+ if ((hp->dma_interrupt_count) % 2 == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+
+ /* Clear the interrupt */
+ out_le32(&(host_pvt.sata_dma_regs-> \
+ interrupt_clear.tfr.low), DMA_CHANNEL(chan));
+ }
+
+ /* Check for error interrupt. */
+ if (err_reg & DMA_CHANNEL(chan)) {
+ /* Error handler ! */
+ dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
+ err_reg);
+
+ /* Clear the interrupt. */
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.\
+ error.low), DMA_CHANNEL(chan));
+ }
+ }
+
+ spin_unlock(&host->lock);
+ kfree(hp);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Function: dma_request_interrupts
+ * arguments: hsdev
+ * returns status
+ * This function registers ISR for a particular DMA channel interrupt
+ */
+static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
+{
+ int retval = 0;
+ int chan;
+
+ for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+ /* Unmask error interrupt */
+ out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
+ DMA_ENABLE_CHAN(chan));
+
+ /* Unmask end-of-transfer interrupt */
+ out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
+ DMA_ENABLE_CHAN(chan));
+ }
+
+ retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
+ if (retval) {
+ dev_err(host_pvt.dwc_dev, "%s: No IRQ %d\n", __func__, irq);
+ return -ENODEV;
+ }
+
+ /* Mark this interrupt as requested */
+ hsdev->irq_dma = irq;
+
+ return 0;
+}
+
+/*
+ * Function: map_sg_to_lli
+ * arguments: sg: scatter/gather list(sg)
+ * num_elems: no of elements in sg list
+ * dma_lli: LLI table
+ * dest: destination address
+ * read: whether the transfer is read or write
+ * returns array of AHB DMA Linked List Items
+ * This function creates a list of LLIs for DMA Xfr and returns the number
+ * of elements in the DMA linked list.
+ *
+ * Note that the Synopsis driver did comment proposing that better performance
+ * is possible by only enabling interrupts on the last item in the linked list.
+ * However, it seems that could be a problem if an error happened on one of the
+ * first items. The transfer would halt, but no error interrupt would occur.
+ *
+ * Currently this function sets interrupts enabled for each linked list item:
+ * DMA_CTL_INT_EN.
+ */
+static int map_sg_to_lli(struct scatterlist *sg, int num_elems, struct lli *lli
+ , dma_addr_t dma_lli, void __iomem *dmadr_addr, int dir)
+{
+ int i, idx = 0;
+ int fis_len = 0;
+ dma_addr_t next_llp;
+ int bl;
+
+ dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x\n",
+ __func__, sg, num_elems, lli, (u32)dma_lli);
+
+ bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
+
+ for (i = 0; i < num_elems; i++, sg++) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
+ "=%d\n", __func__, i, addr, sg_len);
+
+ while (sg_len) {
+
+ if (idx >= SATA_DWC_DMAC_LLI_NUM) {
+ /* The LLI table is not large enough. */
+ dev_err(host_pvt.dwc_dev, "LLI table overrun "
+ "(idx=%d)\n", idx);
+ break;
+ }
+ len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
+ SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
+
+ offset = addr & 0xffff;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ /*
+ * Make sure a LLI block is not created that will span a
+ * 8K max FIS boundary. If the block spans such a FIS
+ * boundary, there is a chance that a DMA burst will
+ * cross that boundary -- this results in an error in
+ * the host controller.
+ */
+ if (fis_len + len > 8192) {
+ dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len"
+ "=%d(0x%x)len=%d(0x%x)\n", fis_len,
+ fis_len, len, len);
+ len = 8192 - fis_len;
+ fis_len = 0;
+ } else {
+ fis_len += len;
+ }
+ if (fis_len == 8192)
+ fis_len = 0;
+
+ /*
+ * Set DMA addresses and lower half of control register
+ * based on direction.
+ */
+ if (dir == DMA_FROM_DEVICE) {
+ lli[idx].dar = cpu_to_le32(addr);
+ lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+
+ lli[idx].ctl.low = cpu_to_le32(
+ DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+ DMA_CTL_SMS(0) |
+ DMA_CTL_DMS(1) |
+ DMA_CTL_SRC_MSIZE(bl) |
+ DMA_CTL_DST_MSIZE(bl) |
+ DMA_CTL_SINC_NOCHANGE |
+ DMA_CTL_SRC_TRWID(2) |
+ DMA_CTL_DST_TRWID(2) |
+ DMA_CTL_INT_EN |
+ DMA_CTL_LLP_SRCEN |
+ DMA_CTL_LLP_DSTEN);
+ } else { /* DMA_TO_DEVICE */
+ lli[idx].sar = cpu_to_le32(addr);
+ lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+
+ lli[idx].ctl.low = cpu_to_le32(
+ DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+ DMA_CTL_SMS(1) |
+ DMA_CTL_DMS(0) |
+ DMA_CTL_SRC_MSIZE(bl) |
+ DMA_CTL_DST_MSIZE(bl) |
+ DMA_CTL_DINC_NOCHANGE |
+ DMA_CTL_SRC_TRWID(2) |
+ DMA_CTL_DST_TRWID(2) |
+ DMA_CTL_INT_EN |
+ DMA_CTL_LLP_SRCEN |
+ DMA_CTL_LLP_DSTEN);
+ }
+
+ dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
+ "0x%08x val: 0x%08x\n", __func__, len,
+ DMA_CTL_BLK_TS(len / 4));
+
+ /* Program the LLI CTL high register */
+ lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS \
+ (len / 4));
+
+ /* Program the next pointer. The next pointer must be
+ * the physical address, not the virtual address.
+ */
+ next_llp = (dma_lli + ((idx + 1) * \
+ sizeof(struct lli)));
+
+ /* The last 2 bits encode the list master select. */
+ next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
+
+ lli[idx].llp = cpu_to_le32(next_llp);
+
+ idx++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ /*
+ * The last next ptr has to be zero and the last control low register
+ * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
+ * and destination enable) set back to 0 (disabled.) This is what tells
+ * the core that this is the last item in the linked list.
+ */
+ if (idx) {
+ lli[idx-1].llp = 0x00000000;
+ lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+
+ /* Flush cache to memory */
+ dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
+ DMA_BIDIRECTIONAL);
+ }
+
+ return idx;
+}
+
+/*
+ * Function: dma_dwc_xfer_start
+ * arguments: Channel number
+ * Return : None
+ * Enables the DMA channel
+ */
+static void dma_dwc_xfer_start(int dma_ch)
+{
+ /* Enable the DMA channel */
+ out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
+ in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
+ DMA_ENABLE_CHAN(dma_ch));
+
+}
+
+
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+ struct lli *lli, dma_addr_t dma_lli,
+ void __iomem *addr, int dir)
+{
+ int dma_ch;
+ int num_lli;
+
+ /* Acquire DMA channel */
+ dma_ch = dma_request_channel();
+ if (dma_ch == -1) {
+ dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+ __func__);
+ return -EAGAIN;
+ }
+
+ /* Convert SG list to linked list of items (LLIs) for AHB DMA */
+ num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
+
+ dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
+ "0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
+ lli, (u32)dma_lli, addr, num_lli);
+
+ /* Clear channel interrupts */
+ clear_chan_interrupts(dma_ch);
+
+ /* Program the CFG register. */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
+ DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+
+ /* Program the address of the linked list */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
+ DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
+
+ /* Program the CTL register with src enable / dst enable */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
+ DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
+
+ return 0;
+}
+
+/*
+ * Function: dma_dwc_exit
+ * arguments: None
+ * returns status
+ * This function exits the SATA DMA driver
+ */
+static void dma_dwc_exit(struct sata_dwc_device *hsdev)
+{
+ dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
+ if (host_pvt.sata_dma_regs)
+ iounmap(host_pvt.sata_dma_regs);
+
+ if (hsdev->irq_dma)
+ free_irq(hsdev->irq_dma, hsdev);
+}
+
+/*
+ * Function: dma_dwc_init
+ * arguments: hsdev
+ * returns status
+ * This function initializes the SATA DMA driver
+ */
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
+{
+ int err;
+ err = dma_request_interrupts(hsdev, irq);
+ if (err) {
+ dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts"
+ " returns %d\n", __func__, err);
+ goto error_out;
+ }
+
+ /* Enabe DMA */
+ out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+
+ dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
+ dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n",
+ host_pvt.sata_dma_regs);
+
+ return 0;
+
+error_out:
+ dma_dwc_exit(hsdev);
+
+ return err;
+}
+
+static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+ if (scr > SCR_NOTIFICATION) {
+ dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+ __func__, scr);
+ return -EINVAL;
+ }
+
+ *val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+ __func__, link->ap->print_id, scr, *val);
+
+ return 0;
+}
+
+static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+ __func__, link->ap->print_id, scr, val);
+ if (scr > SCR_NOTIFICATION) {
+ dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+ __func__, scr);
+ return -EINVAL;
+ }
+ out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+ return 0;
+}
+
+static inline u32 core_scr_read(unsigned int scr)
+{
+ return in_le32((host_pvt.scr_addr_sstatus) + (scr * 4));
+}
+
+static inline void core_scr_write(unsigned int scr, u32 val)
+{
+ out_le32((host_pvt.scr_addr_sstatus) + (scr * 4), val);
+}
+
+static inline void clear_serror(void)
+{
+ out_le32((host_pvt.scr_addr_sstatus) + 4,
+ in_le32((host_pvt.scr_addr_sstatus) + 4));
+}
+
+static inline void clear_intpr(struct sata_dwc_device *hsdev)
+{
+ out_le32(&hsdev->sata_dwc_regs->intpr,
+ in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static inline void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+{
+ out_le32(&hsdev->sata_dwc_regs->intpr,
+ in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static inline void disable_err_irq(struct sata_dwc_device *hsdev)
+{
+ out_le32(&hsdev->sata_dwc_regs->intmr,
+ in_le32(&hsdev->sata_dwc_regs->intmr) & ~SATA_DWC_INTMR_ERRM);
+ out_le32(&hsdev->sata_dwc_regs->errmr, ~SATA_DWC_SERROR_ERR_BITS);
+}
+
+static inline void enable_err_irq(struct sata_dwc_device *hsdev)
+{
+ out_le32(&hsdev->sata_dwc_regs->intmr,
+ in_le32(&hsdev->sata_dwc_regs->intmr) | SATA_DWC_INTMR_ERRM);
+ out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+}
+
+static inline u32 qcmd_tag_to_mask(u8 tag)
+{
+ return 0x00000001 << (tag & 0x1f);
+}
+
+/* See ahci.c */
+static void sata_dwc_error_intr(struct ata_port *ap,
+ struct sata_dwc_device *hsdev, uint intpr)
+{
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ unsigned int err_mask = 0, action = 0;
+ struct ata_queued_cmd *qc;
+ u32 serror;
+ u8 status, tag;
+ u32 err_reg;
+ struct sata_dwc_host_priv *hp;
+ hp = kmalloc(sizeof(*hp), GFP_KERNEL);
+
+ ata_ehi_clear_desc(ehi);
+
+ serror = core_scr_read(SCR_ERROR);
+ status = ap->ops->sff_check_status(ap);
+
+ err_reg = in_le32(&(host_pvt.sata_dma_regs-> \
+ interrupt_status.error.low));
+ tag = ap->link.active_tag;
+
+ dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
+ "dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
+ __func__, serror, intpr, status, hp->dma_interrupt_count,
+ hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+
+ /* Clear error register and interrupt bit */
+ clear_serror();
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
+
+ /* This is the only error happening now. */
+ err_mask |= AC_ERR_HOST_BUS;
+ action |= ATA_EH_RESET;
+
+ /* Pass this on to EH */
+ ehi->serror |= serror;
+ ehi->action |= action;
+
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ ata_port_abort(ap);
+ kfree(hp);
+
+ /*
+ if (irq_stat & PORT_IRQ_FREEZE)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+ */
+}
+
+/*
+ * Function : sata_dwc_isr
+ * arguments : irq, void *dev_instance, struct pt_regs *regs
+ * Return value : irqreturn_t - status of IRQ
+ * This Interrupt handler called via port ops registered function.
+ * .irq_handler = sata_dwc_isr
+ */
+static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+{
+ u8 status, tag;
+ int handled, num_processed, port = 0;
+ uint intpr, sactive, sactive2, tag_mask;
+ struct sata_dwc_device_port *hsdevp;
+ struct ata_host *host = (struct ata_host *)dev_instance;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ struct sata_dwc_host_priv *hp;
+
+ hp = kmalloc(sizeof(*hp), GFP_KERNEL);
+ hp->sata_dwc_sactive_issued = 0;
+
+ spin_lock(&host->lock);
+
+ /* Read the interrupt register */
+ intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+
+ ap = host->ports[port];
+ hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr,
+ ap->link.active_tag);
+
+ /* Check for error interrupt */
+ if (intpr & SATA_DWC_INTPR_ERR) {
+ sata_dwc_error_intr(ap, hsdev, intpr);
+ handled = 1;
+ goto DONE;
+ }
+
+ /* Check for DMA SETUP FIS (FP DMA) interrupt */
+ if (intpr & SATA_DWC_INTPR_NEWFP) {
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+ tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
+ dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+ if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
+ dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+ hp->sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+
+ qc = ata_qc_from_tag(ap, tag);
+ /* Start FP DMA for NCQ command. At this point the tag is the
+ * active tag. It is the tag that matches the command about to
+ * be completed.
+ */
+ qc->ap->link.active_tag = tag;
+ sata_dwc_bmdma_start_by_tag(qc, tag);
+
+ handled = 1;
+ goto DONE;
+ }
+ sactive = core_scr_read(SCR_ACTIVE);
+ tag_mask = (hp->sata_dwc_sactive_issued | sactive) ^ sactive;
+
+ /* If no sactive issued and tag_mask is zero then this is not NCQ */
+ if (hp->sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+ if (ap->link.active_tag == ATA_TAG_POISON)
+ tag = 0;
+ else
+ tag = ap->link.active_tag;
+ qc = ata_qc_from_tag(ap, tag);
+
+ /* DEV interrupt w/ no active qc? */
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+ dev_err(ap->dev, "%s interrupt with no active qc "
+ "qc=%p\n", __func__, qc);
+ ata_sff_check_status(ap);
+ handled = 1;
+ goto DONE;
+ }
+
+ status = ap->ops->sff_check_status(ap);
+
+ qc->ap->link.active_tag = tag;
+ hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+ if (status & ATA_ERR) {
+ dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
+ sata_dwc_qc_complete(ap, qc, 1);
+ handled = 1;
+ goto DONE;
+ }
+
+ dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
+ __func__, prot_2_txt(qc->tf.protocol));
+DRVSTILLBUSY:
+ if (ata_is_dma(qc->tf.protocol)) {
+ /* Each DMA transaction produces 2 interrupts. The DMAC
+ * transfer complete interrupt and the SATA controller
+ * operation done interrupt. The command should be
+ * completed only after both interrupts are seen.
+ */
+ hp->dma_interrupt_count++;
+ if (hsdevp->dma_pending[tag] == \
+ SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "%s: DMA not pending "
+ "intpr=0x%08x status=0x%08x pending=%d\n",
+ __func__, intpr, status,
+ hsdevp->dma_pending[tag]);
+ }
+
+ if ((hp->dma_interrupt_count) % 2 == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+ } else if (ata_is_pio(qc->tf.protocol)) {
+ ata_sff_hsm_move(ap, qc, status, 0);
+ handled = 1;
+ goto DONE;
+ } else {
+ if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+ goto DRVSTILLBUSY;
+ }
+
+ handled = 1;
+ goto DONE;
+ }
+
+ /*
+ * This is NCQ command. At this point we need to figure out for which
+ * tags we have gotten a completion interrupt. One interrupt may serve
+ * as completion for more than one operation when commands are queued
+ * (NCQ). We need to process each completed command.
+ */
+
+PROCESS: /* process completed commands */
+ sactive = core_scr_read(SCR_ACTIVE);
+ tag_mask = (hp->sata_dwc_sactive_issued | sactive) ^ sactive;
+
+ if (sactive != 0 || hp->sata_dwc_sactive_issued > 1 || tag_mask > 1) {
+ dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x sactive_issued=0x%08x "
+ "tag_mask=0x%08x\n", __func__, sactive,
+ hp->sata_dwc_sactive_issued, tag_mask);
+ }
+
+ if ((tag_mask | (hp->sata_dwc_sactive_issued)) != \
+ (hp->sata_dwc_sactive_issued)) {
+ dev_warn(ap->dev, "Bad tag mask? sactive=0x%08x "
+ "hp->sata_dwc_sactive_issued=0x%08x tag_mask=0x%08x\n"
+ , sactive, hp->sata_dwc_sactive_issued, tag_mask);
+ }
+
+ /* read just to clear ... not bad if currently still busy */
+ status = ap->ops->sff_check_status(ap);
+ dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);
+
+ tag = 0;
+ num_processed = 0;
+ while (tag_mask) {
+ num_processed++;
+ while (!(tag_mask & 0x00000001)) {
+ tag++;
+ tag_mask >>= 1;
+ }
+ tag_mask &= (~0x00000001);
+ qc = ata_qc_from_tag(ap, tag);
+
+ /* To be picked up by completion functions */
+ qc->ap->link.active_tag = tag;
+ hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+ /* Let libata/scsi layers handle error */
+ if (status & ATA_ERR) {
+ dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__,
+ status);
+ sata_dwc_qc_complete(ap, qc, 1);
+ handled = 1;
+ goto DONE;
+ }
+
+ /* Process completed command */
+ dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
+ prot_2_txt(qc->tf.protocol));
+ if (ata_is_dma(qc->tf.protocol)) {
+ hp->dma_interrupt_count++;
+ if (hsdevp->dma_pending[tag] == \
+ SATA_DWC_DMA_PENDING_NONE)
+ dev_warn(ap->dev, "%s: DMA not pending?\n",
+ __func__);
+ if ((hp->dma_interrupt_count) % 2 == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+ } else {
+ if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+ goto STILLBUSY;
+ }
+ continue;
+
+STILLBUSY:
+ ap->stats.idle_irq++;
+ dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
+ ap->print_id);
+ } /* while tag_mask */
+
+ /*
+ * Check to see if any commands completed while we were processing our
+ * initial set of completed commands (reading of status clears
+ * interrupts, so we might miss a completed command interrupt if one
+ * came in while we were processing --we read status as part of
+ * processing a completed command).
+ */
+ sactive2 = core_scr_read(SCR_ACTIVE);
+ if (sactive2 != sactive) {
+ dev_dbg(ap->dev, "More completed-sactive=0x%x sactive2=0x%x\n",
+ sactive, sactive2);
+ goto PROCESS;
+ }
+ handled = 1;
+
+DONE:
+ spin_unlock(&host->lock);
+
+ kfree(hp);
+ return IRQ_RETVAL(handled);
+}
+
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+{
+ struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_RX_CLEAR(
+ in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+ } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_TX_CLEAR(
+ in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+ } else {
+ /* This should not happen, it indicates the driver is out of
+ * sync. If it does happen, clear dmacr anyway.
+ */
+ dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and TX DMA not"
+ " pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
+ __func__, tag, hsdevp->dma_pending[tag],
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
+ }
+}
+
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+{
+ struct ata_queued_cmd *qc;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ u8 tag = 0;
+
+ tag = ap->link.active_tag;
+ qc = ata_qc_from_tag(ap, tag);
+
+#ifdef DEBUG_NCQ
+ if (tag > 0) {
+ dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
+ "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+ dir_2_txt(qc->dma_dir), prot_2_txt(qc->tf.protocol),
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ }
+#endif
+
+ if (ata_is_dma(qc->tf.protocol)) {
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
+ "pending dmacr: 0x%08x\n", __func__,
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ }
+
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+ sata_dwc_qc_complete(ap, qc, check_status);
+ ap->link.active_tag = ATA_TAG_POISON;
+ } else {
+ sata_dwc_qc_complete(ap, qc, check_status);
+ }
+}
+
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u32 check_status)
+{
+ u8 status = 0;
+ int i = 0;
+ u32 mask = 0x0;
+ u8 tag = qc->tag;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ u32 serror;
+ struct sata_dwc_host_priv *hp;
+ hp = kmalloc(sizeof(*hp), GFP_KERNEL);
+
+ hp->sata_dwc_sactive_issued = 0;
+ hp->sata_dwc_sactive_queued = 0;
+
+ dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
+ dev_err(ap->dev, "TX DMA PENDING\n");
+ else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
+ dev_err(ap->dev, "RX DMA PENDING\n");
+
+ if (check_status) {
+ i = 0;
+ do {
+ /* check main status, clearing INTRQ */
+ status = ap->ops->sff_check_status(ap);
+ if (status & ATA_BUSY) {
+ dev_dbg(ap->dev, "STATUS BUSY (0x%02x) [%d]\n",
+ status, i);
+ }
+ if (++i > 10)
+ break;
+ } while (status & ATA_BUSY);
+
+ status = ap->ops->sff_check_status(ap);
+ if (unlikely(status & ATA_BUSY))
+ dev_err(ap->dev, "QC complete cmd=0x%02x STATUS BUSY"
+ " (0x%02x) [%d]\n", qc->tf.command, status, i);
+ serror = core_scr_read(SCR_ERROR);
+ if (serror & SATA_DWC_SERROR_ERR_BITS)
+ dev_err(ap->dev, "****** SERROR=0x%08x ******\n",
+ serror);
+ }
+ dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
+ " protocol=%d\n", qc->tf.command, status, ap->print_id,
+ qc->tf.protocol);
+
+ /* clear active bit */
+ mask = ~(qcmd_tag_to_mask(tag));
+ hp->sata_dwc_sactive_queued = hp->sata_dwc_sactive_queued & mask;
+ hp->sata_dwc_sactive_issued = hp->sata_dwc_sactive_issued & mask;
+
+ /* Complete taskfile transaction (does not read SCR registers) */
+ ata_qc_complete(qc);
+
+ return 0;
+}
+
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+{
+ /* Enable selective interrupts by setting the interrupt mask register */
+ out_le32(&hsdev->sata_dwc_regs->intmr,
+ SATA_DWC_INTMR_ERRM |
+ SATA_DWC_INTMR_NEWFPM |
+ SATA_DWC_INTMR_PMABRTM |
+ SATA_DWC_INTMR_DMATM);
+
+ /* Unmask the error bits that should trigger an error interrupt by
+ * setting the error mask register.
+ */
+ out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+ dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+ __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
+ in_le32(&hsdev->sata_dwc_regs->errmr));
+}
+
+static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr = (void *)(base + 0x00);
+ port->data_addr = (void *)(base + 0x00);
+
+ port->error_addr = (void *)(base + 0x04);
+ port->feature_addr = (void *)(base + 0x04);
+
+ port->nsect_addr = (void *)(base + 0x08);
+
+ port->lbal_addr = (void *)(base + 0x0c);
+ port->lbam_addr = (void *)(base + 0x10);
+ port->lbah_addr = (void *)(base + 0x14);
+
+ port->device_addr = (void *)(base + 0x18);
+ port->command_addr = (void *)(base + 0x1c);
+ port->status_addr = (void *)(base + 0x1c);
+
+ port->altstatus_addr = (void *)(base + 0x20);
+ port->ctl_addr = (void *)(base + 0x20);
+}
+
+/*
+ * Function : sata_dwc_port_start
+ * arguments : struct ata_ioports *port
+ * Return value : returns 0 if success, error code otherwise
+ * This function allocates the scatter gather LLI table for AHB DMA
+ */
+static int sata_dwc_port_start(struct ata_port *ap)
+{
+ int err = 0;
+ struct sata_dwc_device *hsdev;
+ struct sata_dwc_device_port *hsdevp = NULL;
+ struct device *pdev;
+ u32 sstatus;
+ int i;
+
+ hsdev = HSDEV_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);
+
+ hsdev->host = ap->host;
+ pdev = ap->host->dev;
+ if (!pdev) {
+ dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
+ err = -ENODEV;
+ goto CLEANUP;
+ }
+
+ /* Allocate Port Struct */
+ hsdevp = kmalloc(sizeof(*hsdevp), GFP_KERNEL);
+ if (!hsdevp) {
+ dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
+ err = -ENOMEM;
+ goto CLEANUP;
+ }
+ memset(hsdevp, 0, sizeof(*hsdevp));
+ hsdevp->hsdev = hsdev;
+
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+ hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+ ap->prd = 0; /* set these so libata doesn't use them */
+ ap->prd_dma = 0;
+
+ /*
+ * DMA - Assign scatter gather LLI table. We can't use the libata
+ * version since it's PRD is IDE PCI specific.
+ */
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+ hsdevp->llit[i] = dma_alloc_coherent(pdev,
+ SATA_DWC_DMAC_LLI_TBL_SZ,
+ &(hsdevp->llit_dma[i]),
+ GFP_ATOMIC);
+ if (!hsdevp->llit[i]) {
+ dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
+ __func__);
+ err = -ENOMEM;
+ goto CLEANUP;
+ }
+ }
+
+ if (ap->port_no == 0) {
+ dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+ __func__);
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+ dev_dbg(ap->dev, "%s:setting burst size in DBTSR\n", __func__);
+ out_le32(&hsdev->sata_dwc_regs->dbtsr,
+ (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+ }
+
+ /* Clear any error bits before libata starts issuing commands */
+ clear_serror();
+
+ ap->private_data = hsdevp;
+
+ /* Are we in Gen I or II */
+ sstatus = core_scr_read(SCR_STATUS);
+ switch (SATA_DWC_SCR0_SPD_GET(sstatus)) {
+ case 0x0:
+ dev_info(ap->dev, "**** No negotiated speed (nothing attached?"
+ ") ****\n");
+ break;
+ case 0x1:
+ dev_info(ap->dev, "**** GEN I speed rate negotiated ****\n");
+ break;
+ case 0x2:
+ dev_info(ap->dev, "**** GEN II speed rate negotiated ****\n");
+ break;
+ }
+
+CLEANUP:
+ if (err) {
+ kfree(hsdevp);
+ sata_dwc_port_stop(ap);
+ dev_dbg(ap->dev, "%s: fail\n", __func__);
+ } else {
+ dev_dbg(ap->dev, "%s: done\n", __func__);
+ }
+
+ return err;
+}
+
+static void sata_dwc_port_stop(struct ata_port *ap)
+{
+ int i;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
+
+ if (hsdevp && hsdev) {
+ /* deallocate LLI table */
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+ dma_free_coherent(ap->host->dev,
+ SATA_DWC_DMAC_LLI_TBL_SZ,
+ hsdevp->llit[i], hsdevp->llit_dma[i]);
+ }
+
+ kfree(hsdevp);
+ }
+ ap->private_data = NULL;
+}
+
+/*
+ * Function : sata_dwc_exec_command_by_tag
+ * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
+ * Return value : None
+ * This function keeps track of individual command tag ids and calls
+ * ata_exec_command in libata
+ */
+static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+ struct ata_taskfile *tf,
+ u8 tag, u32 cmd_issued)
+{
+
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
+ ata_cmd_2_txt(tf), tag);
+
+ spin_lock(&ap->host->lock);
+ hsdevp->cmd_issued[tag] = cmd_issued;
+ spin_unlock(&ap->host->lock);
+
+ /* Clear SError before executing a new command.
+ *
+ * Read a PM's registers now, we will throw away the task
+ * file values loaded into the shadow registers for this command.
+ *
+ * sata_dwc_scr_write and read can not be used here. Clearing the PM
+ * managed SError register for the disk needs to be done before the
+ * task file is loaded.
+ */
+ clear_serror();
+ ata_sff_exec_command(ap, tf);
+}
+
+static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
+ SATA_DWC_CMD_ISSUED_PEND);
+}
+
+static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ u8 tag = qc->tag;
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+ __func__, qc->ap->link.sactive, tag);
+ } else {
+ tag = 0;
+ }
+
+ sata_dwc_bmdma_setup_by_tag(qc, tag);
+}
+
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ int start_dma;
+ u32 reg, dma_chan;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
+ struct ata_port *ap = qc->ap;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ int dir = qc->dma_dir;
+ dma_chan = hsdevp->dma_chan[tag];
+
+ /* Used for ata_bmdma_start(qc) -- we are not BMDMA compatible */
+
+ if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
+ start_dma = 1;
+ if (dir == DMA_TO_DEVICE)
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
+ else
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
+ } else {
+ dev_err(ap->dev, "%s:Command not pending cmd_issued=%d"
+ " (tag=%d)- DMA NOT started\n", __func__,
+ hsdevp->cmd_issued[tag], tag);
+ start_dma = 0;
+ }
+
+ dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma?"
+ " %x\n", __func__, qc, tag, qc->tf.command,
+ dir_2_txt(qc->dma_dir), start_dma);
+ sata_dwc_tf_dump(&(qc->tf));
+
+ if (start_dma) {
+ reg = core_scr_read(SCR_ERROR);
+ if (reg & SATA_DWC_SERROR_ERR_BITS) {
+ dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+ __func__, reg);
+ }
+
+ if (dir == DMA_TO_DEVICE)
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_TXCHEN);
+ else
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_RXCHEN);
+
+ /* Enable AHB DMA transfer on the specified channel */
+ dma_dwc_xfer_start(dma_chan);
+ }
+}
+
+static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+{
+ u8 tag = qc->tag;
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+ __func__, qc->ap->link.sactive, tag);
+ } else {
+ tag = 0;
+ }
+
+ dev_dbg(qc->ap->dev, "%s\n", __func__);
+ sata_dwc_bmdma_start_by_tag(qc, tag);
+}
+
+/*
+ * Function : sata_dwc_qc_prep_by_tag
+ * arguments : ata_queued_cmd *qc, u8 tag
+ * Return value : None
+ * qc_prep for a particular queued command based on tag
+ */
+static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ u32 dma_chan;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ int err;
+
+ dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+ __func__, ap->port_no, dir_2_txt(qc->dma_dir), qc->n_elem);
+
+ dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
+ hsdevp->llit_dma[tag],
+ (void *__iomem)(&hsdev->sata_dwc_regs->dmadr),
+ qc->dma_dir);
+ if (dma_chan < 0) {
+ dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
+ __func__, err);
+ return;
+ }
+
+ hsdevp->dma_chan[tag] = dma_chan;
+}
+
+static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+#ifdef DEBUG_NCQ
+ if (qc->tag > 0 || ap->link.sactive > 1)
+ dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
+ "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+ __func__, ap->print_id, qc->tf.command,
+ ata_cmd_2_txt(&qc->tf), qc->tag,
+ prot_2_txt(qc->tf.protocol), ap->link.active_tag,
+ ap->link.sactive);
+#endif
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ ap->ops->sff_tf_load(ap, &qc->tf);
+ sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
+ SATA_DWC_CMD_ISSUED_PEND);
+ } else {
+ ata_sff_qc_issue(qc);
+ }
+
+ return 0;
+}
+
+/*
+ * Function : sata_dwc_qc_prep
+ * arguments : ata_queued_cmd *qc
+ * Return value : None
+ * qc_prep for a particular queued command
+ */
+static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+{
+ u32 sactive;
+ u8 tag = qc->tag;
+
+ if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+ return;
+
+#ifdef DEBUG_NCQ
+ if (qc->tag > 0)
+ dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+ __func__, tag, qc->ap->link.active_tag);
+#endif
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ sactive = core_scr_read(SCR_ACTIVE);
+ sactive |= (0x00000001 << tag);
+ core_scr_write(SCR_ACTIVE, sactive);
+ dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
+ "sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
+ sactive);
+ } else {
+ tag = 0;
+ }
+
+ sata_dwc_qc_prep_by_tag(qc, tag);
+}
+
+static void sata_dwc_error_handler(struct ata_port *ap)
+{
+ ap->link.flags |= ATA_LFLAG_NO_HRST;
+ ata_sff_error_handler(ap);
+ ap->link.flags &= ~ATA_LFLAG_NO_HRST;
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_dwc_sht = {
+ ATA_NCQ_SHT(DRV_NAME),
+ /*
+ * test-only: Currently this driver doesn't handle NCQ
+ * correctly. We enable NCQ but set the queue depth to a
+ * max of 1. This will get fixed in in a future release.
+ */
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .can_queue = ATA_DEF_QUEUE, /* ATA_MAX_QUEUE */
+ .dma_boundary = ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations sata_dwc_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .error_handler = sata_dwc_error_handler,
+
+ .qc_prep = sata_dwc_qc_prep,
+ .qc_issue = sata_dwc_qc_issue,
+
+ .scr_read = sata_dwc_scr_read,
+ .scr_write = sata_dwc_scr_write,
+
+ .port_start = sata_dwc_port_start,
+ .port_stop = sata_dwc_port_stop,
+
+ .bmdma_setup = sata_dwc_bmdma_setup,
+ .bmdma_start = sata_dwc_bmdma_start,
+};
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .pio_mask = 0x1f, /* pio 0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sata_dwc_ops,
+ },
+};
+
+static int sata_dwc_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct sata_dwc_device *hsdev;
+ u32 idr, versionr;
+ char *ver = (char *) &versionr;
+ u8 *base = NULL;
+ int err = 0;
+ int irq;
+ struct ata_host *host;
+ struct ata_port_info pi = sata_dwc_port_info[0];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct sata_dwc_host_priv *hp;
+ hp = kmalloc(sizeof(*hp), GFP_KERNEL);
+ /* Allocate DWC SATA device */
+ hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+ if (hsdev == NULL) {
+ dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+ memset(hsdev, 0, sizeof(*hsdev));
+
+ /* Ioremap SATA registers */
+ base = of_iomap(ofdev->node, 0);
+ if (!base) {
+ dev_err(&ofdev->dev, "ioremap failed for SATA register"
+ " address\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+ hsdev->reg_base = base;
+ dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+ /* Synopsys DWC SATA specific Registers */
+ hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+ /* Allocate and fill host */
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+ if (!host) {
+ dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+
+ host->private_data = hsdev;
+
+ /* Setup port */
+ host->ports[0]->ioaddr.cmd_addr = base;
+ host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+ host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+ sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
+
+ /* Read the ID and Version Registers */
+ idr = in_le32(&hsdev->sata_dwc_regs->idr);
+ versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
+ dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+ idr, ver[0], ver[1], ver[2]);
+
+ /* Get SATA DMA interrupt number */
+ irq = irq_of_parse_and_map(ofdev->node, 1);
+ if (irq == NO_IRQ) {
+ dev_err(&ofdev->dev, "no SATA DMA irq\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /* Get physical SATA DMA register base address */
+ host_pvt.sata_dma_regs = of_iomap(ofdev->node, 1);
+ if (!host_pvt.sata_dma_regs) {
+ dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
+ " address\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /* Save dev for later use in dev_xxx() routines */
+ host_pvt.dwc_dev = &ofdev->dev;
+
+ /* Initialize AHB DMAC */
+ dma_dwc_init(hsdev, irq);
+
+ /* Enable SATA Interrupts */
+ sata_dwc_enable_interrupts(hsdev);
+
+ /* Get SATA interrupt number */
+ irq = irq_of_parse_and_map(ofdev->node, 0);
+ if (irq == NO_IRQ) {
+ dev_err(&ofdev->dev, "no SATA DMA irq\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /*
+ * Now, register with libATA core, this will also initiate the
+ * device discovery process, invoking our port_start() handler &
+ * error_handler() to execute a dummy Softreset EH session
+ */
+ ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+
+ dev_set_drvdata(&ofdev->dev, host);
+
+ /* Everything is fine */
+ return 0;
+
+error_out:
+ /* Free SATA DMA resources */
+ dma_dwc_exit(hsdev);
+
+ if (base)
+ iounmap(base);
+
+ kfree(hsdev);
+
+ return err;
+}
+
+static int sata_dwc_remove(struct of_device *ofdev)
+{
+ struct device *dev = &ofdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct sata_dwc_device *hsdev = host->private_data;
+
+ ata_host_detach(host);
+
+ dev_set_drvdata(dev, NULL);
+
+ /* Free SATA DMA resources */
+ dma_dwc_exit(hsdev);
+
+ iounmap(hsdev->reg_base);
+ kfree(hsdev);
+ kfree(host);
+
+ dev_dbg(&ofdev->dev, "done\n");
+
+ return 0;
+}
+
+static const struct of_device_id sata_dwc_match[] = {
+ { .compatible = "amcc,sata-460ex", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sata_dwc_match);
+
+static struct of_platform_driver sata_dwc_driver = {
+ .name = "sata-dwc",
+ .match_table = sata_dwc_match,
+ .probe = sata_dwc_probe,
+ .remove = sata_dwc_remove,
+};
+
+static int __init sata_dwc_init(void)
+{
+ return of_register_platform_driver(&sata_dwc_driver);
+}
+
+static void __exit sata_dwc_exit(void)
+{
+ of_unregister_platform_driver(&sata_dwc_driver);
+}
+
+module_init(sata_dwc_init);
+module_exit(sata_dwc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@...liedmicro.com>");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_VERSION(DRV_VERSION);
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists