| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <v2h51f3faa71004072054y4733bf9bq80a04574bebbadba@mail.gmail.com> Date: Wed, 7 Apr 2010 21:54:55 -0600 From: Robert Hancock <hancockrwd@...il.com> To: Mark Knecht <markknecht@...il.com> Cc: Clemens Ladisch <clemens@...isch.de>, Linux Kernel List <linux-kernel@...r.kernel.org> Subject: Re: Failed to initialize MSI interrupts && ioremap reserve_memtype failed -22 On Wed, Apr 7, 2010 at 9:51 PM, Mark Knecht <markknecht@...il.com> wrote: > On Wed, Apr 7, 2010 at 4:46 PM, Robert Hancock <hancockrwd@...il.com> wrote: >> On 04/07/2010 09:57 AM, Mark Knecht wrote: >>> >>> On Wed, Apr 7, 2010 at 7:54 AM, Clemens Ladisch<clemens@...isch.de> >>> wrote: >>>> >>>> Mark Knecht wrote: >>>>> >>>>> New hardware and I haven't seen these messages before so I thought >>>>> I'd post them. >>>> >>>> Both might be harmless. Please show the entire boot log. >>>> >>>> >>>> Regards, >>>> Clemens >>>> >>> >>> Hopefully you mean the contents of dmesg. If it's something else let me >>> know. >>> >>> If the mail server deletes the text file attachment I'll reply again >>> pasting the text in by hand. >> >> Looks like the start of the log was truncated. Can you check if your distro >> writes the bootup kernel output somewhere (like /var/log/dmesg)? >> > > Sorry about that. Apparently the default kernel log buffer wasn;t big > enough anymore. It's a new machine and the first time I've run into > that. > > Hopefully this is everything this time. Hmm, not really clear to me why MSI wouldn't be used.. there aren't any kernel messages that seem to say why MSI would be disabled or unsupported. Unless maybe that particular model doesn't support MSI? What does "lspci -vv" as root show for the network controller? > > Thanks! > > - MArk > > mark@k2 ~ $ dmesg > Linux version 2.6.33-gentoo (root@k2) (gcc version 4.3.4 (Gentoo 4.3.4 > p1.1, pie-10.1.5) ) #2 SMP PREEMPT Wed Apr 7 19:20:31 PDT 2010 > Command line: root=/dev/md3 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000008f000 (usable) > BIOS-e820: 000000000008f000 - 0000000000090000 (reserved) > BIOS-e820: 0000000000090000 - 000000000009d000 (usable) > BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000cf4bd000 (usable) > BIOS-e820: 00000000cf4bd000 - 00000000cf4bf000 (reserved) > BIOS-e820: 00000000cf4bf000 - 00000000cf4c4000 (usable) > BIOS-e820: 00000000cf4c4000 - 00000000cf7bf000 (ACPI NVS) > BIOS-e820: 00000000cf7bf000 - 00000000cf7df000 (usable) > BIOS-e820: 00000000cf7df000 - 00000000cf7ff000 (ACPI data) > BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable) > BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved) > BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) > NX (Execute Disable) protection: active > DMI 2.5 present. > No AGP bridge found > last_pfn = 0x1b0000 max_arch_pfn = 0x400000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-DFFFF write-protect > E0000-FFFFF uncachable > MTRR variable ranges enabled: > 0 base 000000000 mask F80000000 write-back > 1 base 080000000 mask FC0000000 write-back > 2 base 0C0000000 mask FF0000000 write-back > 3 base 100000000 mask F80000000 write-back > 4 base 180000000 mask FE0000000 write-back > 5 base 1A0000000 mask FF0000000 write-back > 6 base 0FFFF0000 mask FFFFF0000 write-protect > 7 disabled > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > last_pfn = 0xcf800 max_arch_pfn = 0x400000000 > initial memory mapped : 0 - 20000000 > init_memory_mapping: 0000000000000000-00000000cf800000 > 0000000000 - 00cf800000 page 2M > kernel direct mapping tables up to cf800000 @ 8000-d000 > init_memory_mapping: 0000000100000000-00000001b0000000 > 0100000000 - 01b0000000 page 2M > kernel direct mapping tables up to 1b0000000 @ b000-13000 > ACPI: RSDP 00000000000fe020 00024 (v02 INTEL ) > ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL DX58SO 00001135 > 01000013) > ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI Warning: Optional field Pm2ControlBlock has zero address or > length: 0000000000000450/0 (20091214/tbfadt-557) > ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 > (20091214/tbfadt-607) > ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: FACS 00000000cf728000 00040 > ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL SSDT PM 00001135 MSFT > 0100000D) > ACPI: DMAR 00000000cf7df000 00140 (v01 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL DX58SO 00001135 MSFT > 0100000D) > ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL PerfTune 00001135 MSFT > 0100000D) > ACPI: Local APIC address 0xfee00000 > (7 early reservations) ==> bootmem [0000000000 - 01b0000000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0001000000 - 0001737e74] TEXT DATA BSS ==> [0001000000 - > 0001737e74] > #2 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - > 0000100000] > #3 [0001738000 - 000173815e] BRK ==> [0001738000 - > 000173815e] > #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - > 0000003000] > #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - > 000000b000] > #6 [000000b000 - 000000e000] PGTABLE ==> [000000b000 - > 000000e000] > [ffffea0000000000-ffffea0005ffffff] PMD -> > [ffff880028600000-ffff88002dbfffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x001b0000 > Movable zone start PFN for each node > early_node_map[7] active PFN ranges > 0: 0x00000000 -> 0x0000008f > 0: 0x00000090 -> 0x0000009d > 0: 0x00000100 -> 0x000cf4bd > 0: 0x000cf4bf -> 0x000cf4c4 > 0: 0x000cf7bf -> 0x000cf7df > 0: 0x000cf7ff -> 0x000cf800 > 0: 0x00100000 -> 0x001b0000 > On node 0 totalpages: 1569919 > DMA zone: 56 pages used for memmap > DMA zone: 108 pages reserved > DMA zone: 3832 pages, LIFO batch:0 > DMA32 zone: 14280 pages used for memmap > DMA32 zone: 830747 pages, LIFO batch:31 > Normal zone: 9856 pages used for memmap > Normal zone: 711040 pages, LIFO batch:31 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled) > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled) > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled) > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a301 base: 0xfed00000 > 16 Processors exceeds NR_CPUS limit of 8 > SMP: Allowing 8 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 24 > Allocating PCI resources starting at d0000000 (gap: d0000000:28000000) > setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 > PERCPU: Embedded 25 pages/cpu @ffff880028200000 s73304 r8192 d20904 > u262144 > pcpu-alloc: s73304 r8192 d20904 u262144 alloc=1*2097152 > pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 1545619 > Kernel command line: root=/dev/md3 > PID hash table entries: 4096 (order: 3, 32768 bytes) > Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > Checking aperture... > No AGP bridge found > Memory: 6103968k/7077888k available (3345k kernel code, 798212k > absent, 174800k reserved, 3225k data, 440k init) > Experimental preemptable hierarchical RCU implementation. > NR_IRQS:512 > Extended CMOS year: 2000 > Console: colour VGA+ 80x25 > console [tty0] enabled > hpet clockevent registered > Fast TSC calibration using PIT > Detected 2666.181 MHz processor. > Calibrating delay loop (skipped), value calculated using timer > frequency.. 5332.36 BogoMIPS (lpj=2666181) > Security Framework initialized > Mount-cache hash table entries: 256 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 9 MCE banks > CPU0: Thermal monitoring enabled (TM1) > CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 > using mwait in idle threads. > Performance Events: Nehalem/Corei7 events, Intel PMU driver. > ... version: 3 > ... bit width: 48 > ... generic registers: 4 > ... value mask: 0000ffffffffffff > ... max period: 000000007fffffff > ... fixed-purpose events: 3 > ... event mask: 000000070000000f > Freeing SMP alternatives: 33k freed > ACPI: Core revision 20091214 > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > Booting Node 0, Processors #1 > CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 > #2 > CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 > #3 > CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 > #4 > CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 > #5 > CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 > #6 > CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 > #7 Ok. > CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 > Brought up 8 CPUs > Total of 8 processors activated (42659.97 BogoMIPS). > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > dca service started, version 1.12.1 > PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > 0xf8000000-0xfbffffff] (base 0xf8000000) > PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > PCI: Using configuration type 1 for base access > bio: create slab <bio-0> at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with > "pci=use_crs" to use them > pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) > pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) > pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] > (ignored) > pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff] > (ignored) > pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfedfffff] > (ignored) > pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff] > (ignored) > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:07.0: PME# supported from D0 D3hot D3cold > pci 0000:00:07.0: PME# disabled > pci 0000:00:19.0: reg 10: [mem 0xd3200000-0xd321ffff] > pci 0000:00:19.0: reg 14: [mem 0xd3223000-0xd3223fff] > pci 0000:00:19.0: reg 18: [io 0x3100-0x311f] > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > pci 0000:00:19.0: PME# disabled > pci 0000:00:1a.0: reg 20: [io 0x30e0-0x30ff] > pci 0000:00:1a.1: reg 20: [io 0x30c0-0x30df] > pci 0000:00:1a.2: reg 20: [io 0x30a0-0x30bf] > pci 0000:00:1a.7: reg 10: [mem 0xd3222000-0xd32223ff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] > pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] > pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] > pci 0000:00:1d.7: reg 10: [mem 0xd3221000-0xd32213ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 > ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) > pci 0000:00:1f.2: reg 10: [io 0x3128-0x312f] > pci 0000:00:1f.2: reg 14: [io 0x3134-0x3137] > pci 0000:00:1f.2: reg 18: [io 0x3120-0x3127] > pci 0000:00:1f.2: reg 1c: [io 0x3130-0x3133] > pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f] > pci 0000:00:1f.2: reg 24: [mem 0xd3220000-0xd32207ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10: [mem 0xf0004000-0xf00040ff 64bit] > pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] > pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] > pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit] > pci 0000:02:00.0: reg 24: [io 0x2000-0x207f] > pci 0000:02:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] > pci 0000:00:03.0: PCI bridge to [bus 02-02] > pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff] > pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit > pref] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:1c.0: PCI bridge to [bus 04-04] > pci 0000:00:1c.1: PCI bridge to [bus 05-05] > pci 0000:06:00.0: reg 10: [io 0x1018-0x101f] > pci 0000:06:00.0: reg 14: [io 0x1024-0x1027] > pci 0000:06:00.0: reg 18: [io 0x1010-0x1017] > pci 0000:06:00.0: reg 1c: [io 0x1020-0x1023] > pci 0000:06:00.0: reg 20: [io 0x1000-0x100f] > pci 0000:06:00.0: reg 24: [mem 0xd3100000-0xd31003ff] > pci 0000:06:00.0: supports D1 > pci 0000:06:00.0: PME# supported from D0 D1 D3hot > pci 0000:06:00.0: PME# disabled > pci 0000:00:1c.4: PCI bridge to [bus 06-06] > pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] > pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff] > pci 0000:07:03.0: reg 10: [mem 0xd3004000-0xd30047ff] > pci 0000:07:03.0: reg 14: [mem 0xd3000000-0xd3003fff] > pci 0000:07:03.0: supports D1 D2 > pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot > pci 0000:07:03.0: PME# disabled > pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > SCSI subsystem initialized > libata version 3.00 loaded. > PCI: Using ACPI for IRQ routing > PCI: pci_cache_line_size set to 64 bytes > Switching to clocksource tsc > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 10 devices > ACPI: ACPI bus type pnp unregistered > system 00:05: [io 0x0500-0x053f] has been reserved > system 00:05: [io 0x0400-0x047f] has been reserved > system 00:05: [io 0x0680-0x06ff] has been reserved > pci 0000:02:00.0: no compatible bridge window for [mem > 0xfff80000-0xffffffff pref] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io disabled] > pci 0000:00:01.0: bridge window [mem disabled] > pci 0000:00:01.0: bridge window [mem pref disabled] > pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x80000) > pci 0000:00:03.0: PCI bridge to [bus 02-02] > pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff] > pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit > pref] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:07.0: bridge window [io disabled] > pci 0000:00:07.0: bridge window [mem disabled] > pci 0000:00:07.0: bridge window [mem pref disabled] > pci 0000:00:1c.0: PCI bridge to [bus 04-04] > pci 0000:00:1c.0: bridge window [io disabled] > pci 0000:00:1c.0: bridge window [mem disabled] > pci 0000:00:1c.0: bridge window [mem pref disabled] > pci 0000:00:1c.1: PCI bridge to [bus 05-05] > pci 0000:00:1c.1: bridge window [io disabled] > pci 0000:00:1c.1: bridge window [mem disabled] > pci 0000:00:1c.1: bridge window [mem pref disabled] > pci 0000:00:1c.4: PCI bridge to [bus 06-06] > pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] > pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff] > pci 0000:00:1c.4: bridge window [mem pref disabled] > pci 0000:00:1e.0: PCI bridge to [bus 07-07] > pci 0000:00:1e.0: bridge window [io disabled] > pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff] > pci 0000:00:1e.0: bridge window [mem pref disabled] > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:01.0: setting latency timer to 64 > pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:03.0: setting latency timer to 64 > pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:07.0: setting latency timer to 64 > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] > pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] > pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd2ffffff] > pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] > pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:06: resource 1 [mem 0xd3100000-0xd31fffff] > pci_bus 0000:07: resource 1 [mem 0xd3000000-0xd30fffff] > pci_bus 0000:07: resource 3 [io 0x0000-0xffff] > pci_bus 0000:07: resource 4 [mem 0x00000000-0xffffffffffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > UDP hash table entries: 4096 (order: 5, 131072 bytes) > UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > pci 0000:02:00.0: Boot video device > PCI: CLS 64 bytes, default 64 > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Placing 64MB software IO TLB between ffff880020000000 - > ffff880024000000 > software IO TLB at phys 0x20000000 - 0x24000000 > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > squashfs: version 4.0 (2009/01/31) Phillip Lougher > NTFS driver 2.1.29 [Flags: R/W]. > msgmni has been set to 11923 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:01.0: setting latency timer to 64 > pcieport 0000:00:03.0: setting latency timer to 64 > pcieport 0000:00:07.0: setting latency timer to 64 > pcieport 0000:00:1c.0: setting latency timer to 64 > pcieport 0000:00:1c.1: setting latency timer to 64 > pcieport 0000:00:1c.4: setting latency timer to 64 > input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > ACPI: Sleep Button [SLPB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A > brd: module loaded > loop: module loaded > Uniform Multi-Platform E-IDE driver > ide_generic: please use "probe_mask=0x3f" module parameter for probing > all legacy ISA IDE ports > Probing IDE interface ide0... > ide0: no devices on the port > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > ide1: no devices on the port > ide1 at 0x170-0x177,0x376 on irq 15 > ide-gd driver 1.18 > ide-cd driver 5.00 > Loading iSCSI transport class v2.0-870. > SCSI Media Changer driver v0.25 > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl > SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc > ems > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > irq 19 > ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > ata4: SATA max UDMA/133 abar m2048@...3220000 port 0xd3220280 irq 19 > ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > ata6: SATA max UDMA/133 abar m2048@...3220000 port 0xd3220380 irq 19 > ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ > ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP > ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3 > ahci 0000:06:00.0: Disabling your PATA port. Use the boot option > 'ahci.marvell_enable=0' to avoid this. > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE > mode > ahci 0000:06:00.0: flags: 64bit stag led slum part > ahci 0000:06:00.0: setting latency timer to 64 > scsi6 : ahci > scsi7 : ahci > scsi8 : ahci > ata7: SATA max UDMA/133 abar m1024@...3100000 port 0xd3100100 irq 16 > ata8: SATA max UDMA/133 abar m1024@...3100000 port 0xd3100180 irq 16 > ata9: DUMMY > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: > dm-devel@...hat.com > cpuidle: using governor ladder > cpuidle: using governor menu > ioatdma: Intel(R) QuickData Technology Driver 4.00 > TCP cubic registered > NET: Registered protocol family 17 > ata6: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ata7: SATA link down (SStatus 0 SControl 300) > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 > ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 > ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 > ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata3.00: configured for UDMA/133 > ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100, ATAPI AN > ata5.00: configured for UDMA/133 > ata1.00: configured for UDMA/133 > ata2.00: configured for UDMA/100 > scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 > ANSI: 5 > sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 > GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: > scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 > ANSI: 5 > sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram > cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 > ANSI: 5 > sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) > scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 > ANSI: 5 > sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) > sd 4:0:0:0: [sdc] Write Protect is off > sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sdc: > sd 2:0:0:0: [sdb] Write Protect is off > sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sdb: sda5 > > sdc1 sdc2 sdc3 > sd 4:0:0:0: [sdc] Attached SCSI disk > sd 0:0:0:0: [sda] Attached SCSI disk > sdb1 sdb2 sdb3 > sd 2:0:0:0: [sdb] Attached SCSI disk > ata8: SATA link down (SStatus 0 SControl 300) > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 2 and added 2 devices. > md: autorun ... > md: considering sdb3 ... > md: adding sdb3 ... > md: adding sdc3 ... > md: created md3 > md: bind<sdc3> > md: bind<sdb3> > md: running: <sdb3><sdc3> > raid1: raid set md3 active with 2 out of 2 mirrors > md3: detected capacity change from 0 to 42960551936 > md: ... autorun DONE. > md3: unknown partition table > kjournald starting. Commit interval 5 seconds > EXT3-fs (md3): mounted filesystem with writeback data mode > VFS: Mounted root (ext3 filesystem) readonly on device 9:3. > Freeing unused kernel memory: 440k freed > Write protecting the kernel read-only data: 6144k > Freeing unused kernel memory: 732k freed > Freeing unused kernel memory: 780k freed > udev: starting version 149 > Monitor-Mwait will be used to enter C-1 state > rtc_cmos 00:02: RTC can wake from S4 > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 > e1000e: Copyright (c) 1999 - 2009 Intel Corporation. > e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > e1000e 0000:00:19.0: setting latency timer to 64 > 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. > Falling back to legacy interrupts. > Linux agpgart interface v0.103 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 1:0:0:0: Attached scsi generic sg1 type 5 > sd 2:0:0:0: Attached scsi generic sg2 type 0 > sd 4:0:0:0: Attached scsi generic sg3 type 0 > firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > uhci_hcd: USB Universal Host Controller Interface driver > firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > Warning! ehci_hcd should always be loaded before uhci_hcd and > ohci_hcd, not after > 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:b1:9a:fd > 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection > 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030e0 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb1: SerialNumber: 0000:00:1a.0 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported > ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3222000 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.33-gentoo ehci_hcd > usb usb2: SerialNumber: 0000:00:1a.7 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb3: SerialNumber: 0000:00:1a.1 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3221000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: EHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.33-gentoo ehci_hcd > usb usb4: SerialNumber: 0000:00:1d.7 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 6 ports detected > uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1a.2: setting latency timer to 64 > uhci_hcd 0000:00:1a.2: UHCI Host Controller > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000030a0 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb5: SerialNumber: 0000:00:1a.2 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: UHCI Host Controller > usb usb6: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb6: SerialNumber: 0000:00:1d.0 > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: UHCI Host Controller > usb usb7: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb7: SerialNumber: 0000:00:1d.1 > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: UHCI Host Controller > usb usb8: Manufacturer: Linux 2.6.33-gentoo uhci_hcd > usb usb8: SerialNumber: 0000:00:1d.2 > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > nvidia: module license 'NVIDIA' taints kernel. > Disabling lock debugging due to kernel taint > firewire_core: created device fw0: GUID 00902700025d5a61, S400 > usb 5-2: new low speed USB device using uhci_hcd and address 2 > nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > nvidia 0000:02:00.0: setting latency timer to 64 > NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 > 00:29:13 PST 2010 > usb 5-2: New USB device found, idVendor=045e, idProduct=0084 > usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-2: Product: Basic Optical Mouse > usb 5-2: Manufacturer: Microsoft > usbcore: registered new interface driver hiddev > input: Microsoft Basic Optical Mouse as > /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2 > generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse > [Microsoft Basic Optical Mouse] on usb-0000:00:1a.2-2/input0 > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > usb 8-2: new low speed USB device using uhci_hcd and address 2 > EXT3-fs (md3): using internal journal > usb 8-2: New USB device found, idVendor=047b, idProduct=0011 > usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 8-2: Product: Standard USB Keyboard > usb 8-2: Manufacturer: Silitek > input: Silitek Standard USB Keyboard as > /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3 > generic-usb 0003:047B:0011.0002: input,hidraw1: USB HID v1.00 Keyboard > [Silitek Standard USB Keyboard ] on usb-0000:00:1d.2-2/input0 > Adding 4200988k swap on /dev/sda2. Priority:-1 extents:1 across:4200988k > Adding 4200988k swap on /dev/sdb2. Priority:-2 extents:1 across:4200988k > Adding 4200988k swap on /dev/sdc2. Priority:-3 extents:1 across:4200988k > e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX > 0000:00:19.0: eth0: 10/100 speed: disabling TSO > NET: Registered protocol family 10 > ioremap reserve_memtype failed -22 > eth0: no IPv6 routers present > mark@k2 ~ $ > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists