[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1271175030-3635-6-git-send-email-Dinh.Nguyen@freescale.com>
Date: Tue, 13 Apr 2010 11:10:29 -0500
From: Dinh.Nguyen@...escale.com
To: linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux@....linux.org.uk,
s.hauer@...gutronix.de, valentin.longchamp@...l.ch,
daniel@...aq.de, grant.likely@...retlab.ca,
r.herring@...escale.com, bryan.wu@...onical.com,
amit.kucheria@...onical.com,
Dinh Nguyen <Dinh.Nguyen@...escale.com>
Subject: [PATCH 2.6.34-rc4 6/8] mx5: Add USB support for Freescale MX51 Babbage
From: Dinh Nguyen <Dinh.Nguyen@...escale.com>
This patch updates the clocks, gpios, iomuxing and device structures for
enabling USB Host functionality on Freescale MX51 Babbage HW.
This patch applies to 2.6.34-rc4.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@...escale.com>
---
arch/arm/mach-mx5/board-mx51_babbage.c | 40 +++++++++++++++++++++++++-
arch/arm/mach-mx5/clock-mx51.c | 8 +++++
arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++
arch/arm/mach-mx5/devices.h | 2 +
4 files changed, 98 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 1338d6a..ddfa48b 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -30,6 +31,8 @@
extern void __init mx5_usb_dr_init(void);
extern void __init mx5_usbh1_init(void);
+#define GPIO_1_7 (0*32+7)
+
static struct platform_device *devices[] __initdata = {
&mxc_fec_device,
};
@@ -50,6 +53,22 @@ static struct pad_desc mx51babbage_pads[] = {
MX51_PAD_EIM_D26__UART3_TXD,
MX51_PAD_EIM_D27__UART3_RTS,
MX51_PAD_EIM_D24__UART3_CTS,
+
+ /* USB HOST1 */
+ MX51_PAD_GPIO_1_25__USBH1_CLK,
+ MX51_PAD_GPIO_1_26__USBH1_DIR,
+ MX51_PAD_GPIO_1_28__USBH1_NXT,
+ MX51_PAD_GPIO_1_11__USBH1_DATA0,
+ MX51_PAD_GPIO_1_12__USBH1_DATA1,
+ MX51_PAD_GPIO_1_13__USBH1_DATA2,
+ MX51_PAD_GPIO_1_14__USBH1_DATA3,
+ MX51_PAD_GPIO_1_15__USBH1_DATA4,
+ MX51_PAD_GPIO_1_16__USBH1_DATA5,
+ MX51_PAD_GPIO_1_17__USBH1_DATA6,
+ MX51_PAD_GPIO_1_18__USBH1_DATA7,
+
+ /* USB HUB reset line*/
+ MX51_PAD_GPIO_1_7__GPIO1_7,
};
/* Serial ports */
@@ -64,12 +83,31 @@ static inline void mxc_init_imx_uart(void)
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
}
-#else /* !SERIAL_IMX */
+#else /* SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
{
}
#endif /* SERIAL_IMX */
+static inline void mx5_babbage_usbhub_reset(void)
+{
+ int ret;
+
+ /* Bring USB hub out of reset */
+ ret = gpio_request(GPIO_1_7, "GPIO1_7");
+ if (ret) {
+ printk("failed to get GPIO_1_7: %d\n", ret);
+ return;
+ }
+ gpio_direction_output(GPIO_1_7, 0);
+
+ /* USB HUB RESET - De-assert USB HUB RESET_N */
+ msleep(1);
+ gpio_set_value(GPIO_1_7, 0);
+ msleep(1);
+ gpio_set_value(GPIO_1_7, 1);
+}
+
/*
* Board specific initialization.
*/
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 8f85f73..36684d0 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -765,6 +765,10 @@ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+/* USB */
+DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -778,6 +782,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 73f2342..3d8f66a 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -11,6 +11,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/imx-uart.h>
@@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
.resource = mxc_fec_resources,
};
+static u64 usb_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource usbotg_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR,
+ .end = MX51_OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_OTG,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbdr_host_device = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(usbotg_resources),
+ .resource = usbotg_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource usbh1_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR + 0x200,
+ .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_H1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1_device = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(usbh1_resources),
+ .resource = usbh1_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index f339ab8..95c45f9 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_usbdr_host_device;
+extern struct platform_device mxc_usbh1_device;
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists