| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-47902f3611b392209e2a412bf7ec02dca95e666d@git.kernel.org>
Date: Wed, 14 Apr 2010 10:05:54 GMT
From: tip-bot for Tom Zanussi <tzanussi@...il.com>
To: linux-tip-commits@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, hpa@...or.com, mingo@...hat.com,
tzanussi@...il.com, tglx@...utronix.de, mingo@...e.hu
Subject: [tip:perf/live] perf trace/scripting: Add rwtop and sctop scripts
Commit-ID: 47902f3611b392209e2a412bf7ec02dca95e666d
Gitweb: http://git.kernel.org/tip/47902f3611b392209e2a412bf7ec02dca95e666d
Author: Tom Zanussi <tzanussi@...il.com>
AuthorDate: Thu, 1 Apr 2010 23:59:23 -0500
Committer: Ingo Molnar <mingo@...e.hu>
CommitDate: Wed, 14 Apr 2010 11:56:08 +0200
perf trace/scripting: Add rwtop and sctop scripts
A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the
perf event stream is fed continuously to the script, which
continuously aggregates the data and reports the current results
every 3 seconds, or at the optionally specified interval. After
the current results are displayed, the aggregations are cleared
and the cycle begins anew.
To run the scripts, simply pipe the output of the 'perf trace
record' step as input to the corresponding 'perf trace report'
step, using '-' as the filename to -o and -i:
$ perf trace record sctop -o - | perf trace report sctop -i -
Also adds clear_term() utility functions to the Util.pm and
Util.py utility modules, for use by any script to clear the
screen.
Signed-off-by: Tom Zanussi <tzanussi@...il.com>
Acked-by: Thomas Gleixner <tglx@...utronix.de>
Cc: fweisbec@...il.com
Cc: rostedt@...dmis.org
Cc: k-keiichi@...jp.nec.com
Cc: acme@...stprotocols.net
LKML-Reference: <1270184365-8281-10-git-send-email-tzanussi@...il.com>
Signed-off-by: Ingo Molnar <mingo@...e.hu>
---
.../perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm | 6 +
tools/perf/scripts/perl/bin/rwtop-record | 2 +
tools/perf/scripts/perl/bin/rwtop-report | 23 +++
tools/perf/scripts/perl/rwtop.pl | 177 ++++++++++++++++++++
.../python/Perf-Trace-Util/lib/Perf/Trace/Util.py | 3 +
tools/perf/scripts/python/bin/sctop-record | 2 +
tools/perf/scripts/python/bin/sctop-report | 24 +++
tools/perf/scripts/python/sctop.py | 78 +++++++++
8 files changed, 315 insertions(+), 0 deletions(-)
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
index f869c48..d94b40c 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
@@ -15,6 +15,7 @@ our @EXPORT_OK = ( @{ $EXPORT_TAGS{'all'} } );
our @EXPORT = qw(
avg nsecs nsecs_secs nsecs_nsecs nsecs_usecs print_nsecs
+clear_term
);
our $VERSION = '0.01';
@@ -55,6 +56,11 @@ sub nsecs_str {
return $str;
}
+sub clear_term
+{
+ print "\x1b[H\x1b[2J";
+}
+
1;
__END__
=head1 NAME
diff --git a/tools/perf/scripts/perl/bin/rwtop-record b/tools/perf/scripts/perl/bin/rwtop-record
new file mode 100644
index 0000000..63976bf
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rwtop-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
diff --git a/tools/perf/scripts/perl/bin/rwtop-report b/tools/perf/scripts/perl/bin/rwtop-report
new file mode 100644
index 0000000..93e698c
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rwtop-report
@@ -0,0 +1,23 @@
+#!/bin/bash
+# description: system-wide r/w top
+# args: [interval]
+n_args=0
+for i in "$@"
+do
+ if expr match "$i" "-" > /dev/null ; then
+ break
+ fi
+ n_args=$(( $n_args + 1 ))
+done
+if [ "$n_args" -gt 1 ] ; then
+ echo "usage: rwtop-report [interval]"
+ exit
+fi
+if [ "$n_args" -gt 0 ] ; then
+ interval=$1
+ shift
+fi
+perf trace $@ -s ~/libexec/perf-core/scripts/perl/rwtop.pl $interval
+
+
+
diff --git a/tools/perf/scripts/perl/rwtop.pl b/tools/perf/scripts/perl/rwtop.pl
new file mode 100644
index 0000000..ec2ab49
--- /dev/null
+++ b/tools/perf/scripts/perl/rwtop.pl
@@ -0,0 +1,177 @@
+#!/usr/bin/perl -w
+# (c) 2010, Tom Zanussi <tzanussi@...il.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# read/write top
+#
+# Periodically displays system-wide r/w call activity, broken down by
+# pid. If an [interval] arg is specified, the display will be
+# refreshed every [interval] seconds. The default interval is 3
+# seconds.
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+my $default_interval = 3;
+my $nlines = 20;
+my $print_thread;
+
+my %reads;
+my %writes;
+
+my $interval = shift;
+if (!$interval) {
+ $interval = $default_interval;
+}
+
+sub syscalls::sys_exit_read
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $ret) = @_;
+
+ if ($ret > 0) {
+ $reads{$common_pid}{bytes_read} += $ret;
+ } else {
+ if (!defined ($reads{$common_pid}{bytes_read})) {
+ $reads{$common_pid}{bytes_read} = 0;
+ }
+ $reads{$common_pid}{errors}{$ret}++;
+ }
+}
+
+sub syscalls::sys_enter_read
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $fd, $buf, $count) = @_;
+
+ $reads{$common_pid}{bytes_requested} += $count;
+ $reads{$common_pid}{total_reads}++;
+ $reads{$common_pid}{comm} = $common_comm;
+}
+
+sub syscalls::sys_exit_write
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $ret) = @_;
+
+ if ($ret <= 0) {
+ $writes{$common_pid}{errors}{$ret}++;
+ }
+}
+
+sub syscalls::sys_enter_write
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm,
+ $nr, $fd, $buf, $count) = @_;
+
+ $writes{$common_pid}{bytes_written} += $count;
+ $writes{$common_pid}{total_writes}++;
+ $writes{$common_pid}{comm} = $common_comm;
+}
+
+sub trace_begin
+{
+ $SIG{ALRM} = \&print_totals;
+ alarm 1;
+}
+
+sub trace_end
+{
+ print_unhandled();
+ print_totals();
+}
+
+sub print_totals
+{
+ my $count;
+
+ $count = 0;
+
+ clear_term();
+
+ printf("\nread counts by pid:\n\n");
+
+ printf("%6s %20s %10s %10s %10s\n", "pid", "comm",
+ "# reads", "bytes_req", "bytes_read");
+ printf("%6s %-20s %10s %10s %10s\n", "------", "--------------------",
+ "----------", "----------", "----------");
+
+ foreach my $pid (sort {$reads{$b}{bytes_read} <=>
+ $reads{$a}{bytes_read}} keys %reads) {
+ my $comm = $reads{$pid}{comm};
+ my $total_reads = $reads{$pid}{total_reads};
+ my $bytes_requested = $reads{$pid}{bytes_requested};
+ my $bytes_read = $reads{$pid}{bytes_read};
+
+ printf("%6s %-20s %10s %10s %10s\n", $pid, $comm,
+ $total_reads, $bytes_requested, $bytes_read);
+
+ if (++$count == $nlines) {
+ last;
+ }
+ }
+
+ $count = 0;
+
+ printf("\nwrite counts by pid:\n\n");
+
+ printf("%6s %20s %10s %13s\n", "pid", "comm",
+ "# writes", "bytes_written");
+ printf("%6s %-20s %10s %13s\n", "------", "--------------------",
+ "----------", "-------------");
+
+ foreach my $pid (sort {$writes{$b}{bytes_written} <=>
+ $writes{$a}{bytes_written}} keys %writes) {
+ my $comm = $writes{$pid}{comm};
+ my $total_writes = $writes{$pid}{total_writes};
+ my $bytes_written = $writes{$pid}{bytes_written};
+
+ printf("%6s %-20s %10s %13s\n", $pid, $comm,
+ $total_writes, $bytes_written);
+
+ if (++$count == $nlines) {
+ last;
+ }
+ }
+
+ %reads = ();
+ %writes = ();
+ alarm $interval;
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+ if ((scalar keys %unhandled) == 0) {
+ return;
+ }
+
+ print "\nunhandled events:\n\n";
+
+ printf("%-40s %10s\n", "event", "count");
+ printf("%-40s %10s\n", "----------------------------------------",
+ "-----------");
+
+ foreach my $event_name (keys %unhandled) {
+ printf("%-40s %10d\n", $event_name, $unhandled{$event_name});
+ }
+}
+
+sub trace_unhandled
+{
+ my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+ $common_pid, $common_comm) = @_;
+
+ $unhandled{$event_name}++;
+}
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
index 83e9143..9689bc0 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
@@ -23,3 +23,6 @@ def nsecs_nsecs(nsecs):
def nsecs_str(nsecs):
str = "%5u.%09u" % (nsecs_secs(nsecs), nsecs_nsecs(nsecs)),
return str
+
+def clear_term():
+ print("\x1b[H\x1b[2J")
diff --git a/tools/perf/scripts/python/bin/sctop-record b/tools/perf/scripts/python/bin/sctop-record
new file mode 100644
index 0000000..27ccffa
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sctop-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/sctop-report b/tools/perf/scripts/python/bin/sctop-report
new file mode 100644
index 0000000..b01c842
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sctop-report
@@ -0,0 +1,24 @@
+#!/bin/bash
+# description: syscall top
+# args: [comm] [interval]
+n_args=0
+for i in "$@"
+do
+ if expr match "$i" "-" > /dev/null ; then
+ break
+ fi
+ n_args=$(( $n_args + 1 ))
+done
+if [ "$n_args" -gt 2 ] ; then
+ echo "usage: sctop-report [comm] [interval]"
+ exit
+fi
+if [ "$n_args" -gt 1 ] ; then
+ comm=$1
+ interval=$2
+ shift 2
+elif [ "$n_args" -gt 0 ] ; then
+ interval=$1
+ shift
+fi
+perf trace $@ -s ~/libexec/perf-core/scripts/python/sctop.py $comm $interval
diff --git a/tools/perf/scripts/python/sctop.py b/tools/perf/scripts/python/sctop.py
new file mode 100644
index 0000000..6cafad4
--- /dev/null
+++ b/tools/perf/scripts/python/sctop.py
@@ -0,0 +1,78 @@
+# system call top
+# (c) 2010, Tom Zanussi <tzanussi@...il.com>
+# Licensed under the terms of the GNU GPL License version 2
+#
+# Periodically displays system-wide system call totals, broken down by
+# syscall. If a [comm] arg is specified, only syscalls called by
+# [comm] are displayed. If an [interval] arg is specified, the display
+# will be refreshed every [interval] seconds. The default interval is
+# 3 seconds.
+
+import thread
+import time
+import os
+import sys
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+ '/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+from Util import *
+
+usage = "perf trace -s syscall-counts.py [comm] [interval]\n";
+
+for_comm = None
+default_interval = 3
+interval = default_interval
+
+if len(sys.argv) > 3:
+ sys.exit(usage)
+
+if len(sys.argv) > 2:
+ for_comm = sys.argv[1]
+ interval = int(sys.argv[2])
+elif len(sys.argv) > 1:
+ try:
+ interval = int(sys.argv[1])
+ except ValueError:
+ for_comm = sys.argv[1]
+ interval = default_interval
+
+syscalls = autodict()
+
+def trace_begin():
+ thread.start_new_thread(print_syscall_totals, (interval,))
+ pass
+
+def raw_syscalls__sys_enter(event_name, context, common_cpu,
+ common_secs, common_nsecs, common_pid, common_comm,
+ id, args):
+ if for_comm is not None:
+ if common_comm != for_comm:
+ return
+ try:
+ syscalls[id] += 1
+ except TypeError:
+ syscalls[id] = 1
+
+def print_syscall_totals(interval):
+ while 1:
+ clear_term()
+ if for_comm is not None:
+ print "\nsyscall events for %s:\n\n" % (for_comm),
+ else:
+ print "\nsyscall events:\n\n",
+
+ print "%-40s %10s\n" % ("event", "count"),
+ print "%-40s %10s\n" % ("----------------------------------------", \
+ "----------"),
+
+ for id, val in sorted(syscalls.iteritems(), key = lambda(k, v): (v, k), \
+ reverse = True):
+ try:
+ print "%-40d %10d\n" % (id, val),
+ except TypeError:
+ pass
+ syscalls.clear()
+ time.sleep(interval)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists