Message-ID: <20100414125205.23181.15562.stgit@localhost.localdomain>
Date:	Wed, 14 Apr 2010 13:52:08 +0100
From:	Alan Cox <alan@...ux.intel.com>
To:	linux-i2c@...r.kernel.org, khali@...ux-fr.org,
	linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 4/4] emc1403: thermal sensor support

From: Kalhan Trisal <kalhan.trisal at intel.com>

Provides support for the emc1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.

Signed-off-by: Kalhan Trisal <kalhan.trisal at intel.com>
Signed-off-by: Alan Cox <alan@...ux.intel.com>
---

 drivers/hwmon/Kconfig   |   10 +
 drivers/hwmon/Makefile  |    1 
 drivers/hwmon/emc1403.c |  437 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 448 insertions(+), 0 deletions(-)
 create mode 100644 drivers/hwmon/emc1403.c


diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6868b9d..34ee302 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1112,6 +1112,16 @@ config SENSORS_LIS331DL
 	  Device can be configured using sysfs.
 	  x y Z data can be   accessible via sysfs.
 
+config SENSORS_EMC1403
+	tristate "SMSC EMC1403 thermal sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the SMSC Devices
+	  EMC1403 temperature monitoring chip.
+
+	  Threshold values can be configured using sysfs.
+	  Data from the different diode are accessible via sysfs.
+
 if ACPI
 
 comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index ebeb2a2..a7332ce 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
new file mode 100644
index 0000000..b71cfa1
--- /dev/null
+++ b/drivers/hwmon/emc1403.c
@@ -0,0 +1,437 @@
+/*
+ * emc1403.c - SMSC Thermal Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+
+/* Limit status reg Therm/High/Low/Fault*/
+static const u8 THM_STAT_REG_TEMP[] = { 0x37, 0x35, 0x36, 0x1B, 0x02};
+
+/* Channel  diode temp set */
+static const u8 THM_CHAN_TEMP[] = { 0x10, 0x08, 0x04, 0x02, 0x01 };
+
+/* Therm Limit reg store values */
+static const u8 THM_LIMIT_REG_TEMP[] = { 0x05, 0x06, 0x07, 0x08, 0x15, 0x16,
+						0x19, 0x1A, 0x20, 0x21 };
+
+/* DATA REGISTERS */
+static const u8 THM_REG_CURR_TEMP[] = { 0x00, 0x01, 0x23 };
+
+#define THERMAL_PID_REG		0xfd
+#define THERMAL_SMSC_ID_REG	0xfe
+#define THERMAL_REVISION_REG	0xff
+#define THERMAL_ADC_UPDATE_BUSY	0x80
+#define I2C_THERMAL_SLAVE_ADDR	0x4C
+#define TEMP1			1
+#define TEMP2			2
+#define TEMP3			4
+#define IRQ_TYPE_MASK		(1 << 15)
+#define HIGH_EVENT		1
+#define LOW_EVENT		2
+#define THERM_EVENT		3
+#define FAULT_EVENT		4
+#define ALERT_EVENT		1
+
+struct thermal_data {
+	struct i2c_client *client;
+	struct device *hwmon_dev;
+	int therm_irq;
+	int alert_irq;
+	struct work_struct therm_handler;
+	struct work_struct alert_handler;
+};
+
+static int calculate_offset(int type, int temp_ofs)
+{
+	int offset = 0;
+
+	switch (type) {
+	case TEMP1:
+		if (temp_ofs == 0)
+			offset = 1;
+		else if (temp_ofs == 1)
+			offset = 0;
+		else if (temp_ofs == 2)
+			offset = 8;
+		break;
+	case TEMP2:
+		if (temp_ofs == 0)
+			offset = 3;
+		else if (temp_ofs == 1)
+			offset = 2;
+		else if (temp_ofs == 2)
+			offset = 6;
+		break;
+	case TEMP3:
+		if (temp_ofs == 0)
+			offset = 5;
+		else if (temp_ofs == 1)
+			offset = 4;
+		else if (temp_ofs == 2)
+			offset = 7;
+		break;
+	default:
+		offset = -1;
+		break;
+	}
+	return offset;
+
+}
+
+
+static ssize_t show_temp_auto_offset(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
+	int temp_index = s_attr->index;
+	int temp_ofs = s_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+	int ret_offset;
+
+	ret_offset = calculate_offset(temp_index, temp_ofs);
+	if (ret_offset == -1)
+		return -EINVAL;
+	ret_val = i2c_smbus_read_byte_data(client,
+				THM_LIMIT_REG_TEMP[ret_offset]);
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static ssize_t store_temp_auto_offset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *s_attr = to_sensor_dev_attr_2(attr);
+	int temp_index = s_attr->index;
+	int temp_ofs = s_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int ret_offset;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	ret_offset = calculate_offset(temp_index, temp_ofs);
+	if (ret_offset == -1)
+		return -EINVAL;
+
+	i2c_smbus_write_byte_data(client, THM_LIMIT_REG_TEMP[ret_offset], val);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	return sprintf(buf, "%d\n",
+		i2c_smbus_read_byte_data(client, THM_LIMIT_REG_TEMP[9]));
+}
+
+static ssize_t store_temp_hyst(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	i2c_smbus_write_byte_data(client, THM_LIMIT_REG_TEMP[9], val);
+	return count;
+}
+
+static ssize_t show_temp1_curr_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+
+	ret_val = i2c_smbus_read_byte_data(client, THM_REG_CURR_TEMP[0]);
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static ssize_t show_temp2_curr_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+
+	ret_val = i2c_smbus_read_byte_data(client, THM_REG_CURR_TEMP[1]);
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static ssize_t show_temp3_curr_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+
+	ret_val = i2c_smbus_read_byte_data(client, THM_REG_CURR_TEMP[2]);
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static ssize_t show_status_reg(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int r1, r2, r3, r4;
+
+	r1 = i2c_smbus_read_byte_data(client, 0x1F);
+	r2 = i2c_smbus_read_byte_data(client, 0x35);
+	r3 = i2c_smbus_read_byte_data(client, 0x36);
+	r4 = i2c_smbus_read_byte_data(client, 0x37);
+	return sprintf(buf, "alarm=%x,High=%x,Low=%x,Therm=%x \n",
+				r1, r2, r3, r4);
+}
+
+static ssize_t show_power_state(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val = i2c_smbus_read_byte_data(client, 0x03);
+	return sprintf(buf, "%x", (ret_val >> 6) & 1);
+}
+
+static ssize_t store_power_state(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	char curr_val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	curr_val = i2c_smbus_read_byte_data(client, 0x03);
+	if (val == 1)
+		curr_val &= 0xBF;
+	else if (val == 0)
+		curr_val |= 0x40;
+	else
+		return -EINVAL;
+	i2c_smbus_write_byte_data(client, 0x03, curr_val);
+	return count;
+}
+
+static ssize_t show_mode(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val = i2c_smbus_read_byte_data(client, 0x03);
+	return sprintf(buf, "%x", (ret_val >> 7) & 1);
+}
+
+static ssize_t store_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int curr_val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	curr_val = i2c_smbus_read_byte_data(client, 0x03);
+	if (val == 1)
+		curr_val &= 0x7F;
+	else if (val == 0)
+		curr_val |= 0x80;
+	else
+		return -EINVAL;
+	i2c_smbus_write_byte_data(client, 0x03, curr_val);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 2, 1);
+static DEVICE_ATTR(temp1_curr, S_IRUGO, show_temp1_curr_temp, NULL);
+
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 1, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 2, 2);
+static DEVICE_ATTR(temp2_curr, S_IRUGO, show_temp2_curr_temp, NULL);
+
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 0, 4);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 1, 4);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR,
+	show_temp_auto_offset, store_temp_auto_offset, 2, 4);
+static DEVICE_ATTR(temp3_curr, S_IRUGO, show_temp3_curr_temp, NULL);
+
+static DEVICE_ATTR(hyster, S_IRUGO | S_IWUSR, show_temp_hyst, store_temp_hyst);
+static DEVICE_ATTR(status, S_IRUGO, show_status_reg, NULL);
+
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+	show_power_state, store_power_state);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, show_mode, store_mode);
+
+static struct attribute *mid_att_thermal[] = {
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&dev_attr_temp1_curr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&dev_attr_temp2_curr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
+	&dev_attr_temp3_curr.attr,
+	&dev_attr_hyster.attr,
+	&dev_attr_status.attr,
+	&dev_attr_power_state.attr,
+	&dev_attr_mode.attr,
+	NULL
+};
+
+static struct attribute_group m_thermal_gr = {
+	.name = "emc1403",
+	.attrs = mid_att_thermal
+};
+
+static void emc1403_set_default_config(struct i2c_client *client)
+{
+	i2c_smbus_write_byte_data(client, 0x03, 0x00);
+	i2c_smbus_write_byte_data(client, 0x04, 0x02);
+	i2c_smbus_write_byte_data(client, 0x22, 0x00);
+}
+
+static int  emc1403_probe(struct i2c_client *new_client,
+			const struct i2c_device_id *id)
+{
+	int res = 0;
+	struct thermal_data *data;
+	u16 pid, smsc_id, revision;
+
+	data = kzalloc(sizeof(struct thermal_data), GFP_KERNEL);
+
+	if (data == NULL) {
+		printk(KERN_WARNING "emc1403: out of memory");
+		return -ENOMEM;
+	}
+	data->client = new_client;
+	i2c_set_clientdata(new_client, data);
+
+	/* Check if thermal chip is SMSC and EMC1403 */
+	smsc_id = i2c_smbus_read_byte_data(new_client,
+					THERMAL_SMSC_ID_REG);
+	if (smsc_id != 0x5d) {
+		printk(KERN_WARNING "emc1403: vendor id mismatch\n");
+		goto thermal_error1;
+	}
+	pid = i2c_smbus_read_byte_data(new_client, THERMAL_PID_REG);
+	if (pid != 0x21)  {
+		printk(KERN_WARNING "emc1403: product id mismatch\n");
+		goto thermal_error1;
+	}
+	revision = i2c_smbus_read_byte_data(new_client,
+				THERMAL_REVISION_REG);
+	if (revision != 0x01) {
+		printk(KERN_WARNING "emc1403: rev id mismatch (is %d)\n",
+								revision);
+		goto thermal_error1;
+	}
+	res = sysfs_create_group(&new_client->dev.kobj, &m_thermal_gr);
+	if (res) {
+		printk(KERN_WARNING "emc1403: create group failed\n");
+		hwmon_device_unregister(data->hwmon_dev);
+		goto thermal_error1;
+	}
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		res = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		printk(KERN_WARNING "emc1403:Register hwmon dev failed\n");
+		goto thermal_error2;
+	}
+	emc1403_set_default_config(new_client);
+	dev_info(&new_client->dev, "%s EMC1403 Thermal chip found\n",
+							new_client->name);
+	return res;
+thermal_error2:
+	sysfs_remove_group(&new_client->dev.kobj, &m_thermal_gr);
+thermal_error1:
+	i2c_set_clientdata(new_client, NULL);
+	kfree(data);
+	return res;
+}
+
+static int emc1403_remove(struct i2c_client *client)
+{
+	struct thermal_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &m_thermal_gr);
+	kfree(data);
+	return 0;
+}
+
+static struct i2c_device_id emc1403_idtable[] = {
+	{ "i2c_thermal", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
+
+static struct i2c_driver sensor_emc1403 = {
+	.driver = {
+		.name = "emc1403",
+	},
+	.probe = emc1403_probe,
+	.remove = emc1403_remove,
+	.id_table = emc1403_idtable,
+};
+
+static int __init sensor_emc1403_init(void)
+{
+	return i2c_add_driver(&sensor_emc1403);
+}
+
+static void  __exit sensor_emc1403_exit(void)
+{
+	i2c_del_driver(&sensor_emc1403);
+}
+
+module_init(sensor_emc1403_init);
+module_exit(sensor_emc1403_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@...el.com");
+MODULE_DESCRIPTION("emc1403 Thermal Driver");
+MODULE_LICENSE("GPL v2");

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists