[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201004142137.36524.maciej.rutecki@gmail.com>
Date: Wed, 14 Apr 2010 21:37:36 +0200
From: Maciej Rutecki <maciej.rutecki@...il.com>
To: Martin Mokrejs <mmokrejs@...osome.natur.cuni.cz>,
linux-usb@...r.kernel.org, usb-storage@...ts.one-eyed-alien.net
Cc: LKML <linux-kernel@...r.kernel.org>
Subject: Re: 2.6.33.1: USB camera hung_task_timeout_secs >120 seconds
(Add CCs)
Can you check, that eg. 2.6.30 and latest -RC works OK?
On wtorek, 13 kwietnia 2010 o 22:07:20 Martin Mokrejs wrote:
> Hi,
> I am not certain whether the stacktrace I received is just intentional
> to attract developer eyes or whether this is actually a false alarm:
> mounting USB mass storage device media always takes a long while.
> This is a P4-M laptop with Kouwell 7004 FW/USB2.0 PCMCIA card.
> Comments?
> Thanks,
> martin
>
>
> pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
> pci 0000:07:00.0: reg 14: [mem 0x00000000-0x000000ff]
> pci 0000:07:00.0: reg 20: [io 0xfce0-0xfcff]
> pci 0000:07:00.0: supports D1 D2
> pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:07:00.0: PME# disabled
> pci 0000:07:00.1: reg 14: [mem 0x00000000-0x000000ff]
> pci 0000:07:00.1: reg 20: [io 0xfce0-0xfcff]
> pci 0000:07:00.1: supports D1 D2
> pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:07:00.1: PME# disabled
> pci 0000:07:00.2: reg 10: [mem 0x00000000-0x000000ff]
> pci 0000:07:00.2: reg 14: [mem 0x00000000-0x000000ff]
> pci 0000:07:00.2: supports D1 D2
> pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:07:00.2: PME# disabled
> pci 0000:07:00.3: reg 10: [mem 0x00000000-0x000007ff]
> pci 0000:07:00.3: reg 14: [io 0x0000-0x007f]
> pci 0000:07:00.3: supports D2
> pci 0000:07:00.3: PME# supported from D2 D3hot D3cold
> pci 0000:07:00.3: PME# disabled
> pci 0000:07:00.3: BAR 0: assigned [mem 0x8c000000-0x8c0007ff]
> pci 0000:07:00.3: BAR 0: set to [mem 0x8c000000-0x8c0007ff] (PCI address
> [0x8c000000-0x8c0007ff] pci 0000:07:00.0: BAR 1: assigned [mem
> 0x8c000800-0x8c0008ff]
> pci 0000:07:00.0: BAR 1: set to [mem 0x8c000800-0x8c0008ff] (PCI address
> [0x8c000800-0x8c0008ff] pci 0000:07:00.1: BAR 1: assigned [mem
> 0x8c000900-0x8c0009ff]
> pci 0000:07:00.1: BAR 1: set to [mem 0x8c000900-0x8c0009ff] (PCI address
> [0x8c000900-0x8c0009ff] pci 0000:07:00.2: BAR 0: assigned [mem
> 0x8c000a00-0x8c000aff]
> pci 0000:07:00.2: BAR 0: set to [mem 0x8c000a00-0x8c000aff] (PCI address
> [0x8c000a00-0x8c000aff] pci 0000:07:00.2: BAR 1: assigned [mem
> 0x8c000b00-0x8c000bff]
> pci 0000:07:00.2: BAR 1: set to [mem 0x8c000b00-0x8c000bff] (PCI address
> [0x8c000b00-0x8c000bff] pci 0000:07:00.3: BAR 1: assigned [io
> 0xac00-0xac7f]
> pci 0000:07:00.3: BAR 1: set to [io 0xac00-0xac7f] (PCI address
> [0xac00-0xac7f] pci 0000:07:00.0: BAR 4: assigned [io 0xac80-0xac9f]
> pci 0000:07:00.0: BAR 4: set to [io 0xac80-0xac9f] (PCI address
> [0xac80-0xac9f] pci 0000:07:00.1: BAR 4: assigned [io 0xaca0-0xacbf]
> pci 0000:07:00.1: BAR 4: set to [io 0xaca0-0xacbf] (PCI address
> [0xaca0-0xacbf] uhci_hcd 0000:07:00.0: enabling device (0000 -> 0003)
> uhci_hcd 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) ->
> IRQ 11 uhci_hcd 0000:07:00.0: UHCI Host Controller
> uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:07:00.0: irq 11, io base 0x0000ac80
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.33.1 uhci_hcd
> usb usb3: SerialNumber: 0000:07:00.0
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:07:00.1: enabling device (0000 -> 0003)
> uhci_hcd 0000:07:00.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) ->
> IRQ 11 uhci_hcd 0000:07:00.1: UHCI Host Controller
> uhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:07:00.1: irq 11, io base 0x0000aca0
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.33.1 uhci_hcd
> usb usb4: SerialNumber: 0000:07:00.1
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ohci1394 0000:07:00.3: enabling device (0080 -> 0083)
> ohci1394 0000:07:00.3: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) ->
> IRQ 11 ohci1394 0000:07:00.3: setting latency timer to 64
> ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[8c000000-8c0007ff]
> Max Packet=[1024] IR/IT contexts=[4/8] ehci_hcd: USB 2.0 'Enhanced' Host
> Controller (EHCI) Driver
> Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not
> after ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
> ehci_hcd 0000:07:00.2: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) ->
> IRQ 11 ehci_hcd 0000:07:00.2: EHCI Host Controller
> ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:07:00.2: irq 11, io mem 0x8c000a00
> ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: EHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.33.1 ehci_hcd
> usb usb5: SerialNumber: 0000:07:00.2
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 4 ports detected
> ieee1394: Host added: ID:BUS[1-00:1023] GUID[00ff06ff00ff30ff]
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> usb 3-1: New USB device found, idVendor=07b4, idProduct=0105
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 3-1: Product: C5050Z
> usb 3-1: Manufacturer: OLYMPUS
> usb 3-1: SerialNumber: 000242752403
> usbcore: registered new interface driver libusual
> Initializing USB Mass Storage driver...
> scsi2 : usb-storage 3-1:1.0
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> scsi 2:0:0:0: Direct-Access OLYMPUS C5050Z 1.00 PQ: 0 ANSI:
> 2 sd 2:0:0:0: Attached scsi generic sg2 type 0
> sd 2:0:0:0: timing out command, waited 180s
> INFO: task async/0:6797 blocked for more than 120 seconds.
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> async/0 D c10184f2 0 6797 2 0x00000000
> de735da4 00000046 de735d9c c10184f2 00000000 d1202a90 7fffffff 7fffffff
> d1202a90 de735dd0 c12f6210 de735db8 c115f617 ce106400 de735dc0 c11ea443
> de735dec 7fffffff de735e88 d1202a90 de735e08 c12f6110 d1202a90 00000000
> Call Trace:
> [<c10184f2>] ? complete+0x1f/0x28
> [<c12f6210>] schedule_timeout+0x17/0x109
> [<c115f617>] ? kobject_put+0x37/0x3c
> [<c11ea443>] ? put_device+0xf/0x11
> [<c12f6110>] wait_for_common+0x96/0xe3
> [<c101a883>] ? default_wake_function+0x0/0xd
> [<c12f61cf>] wait_for_completion+0x12/0x14
> [<c1157ebd>] blk_execute_rq+0x74/0x8b
> [<c1157dc0>] ? blk_end_sync_rq+0x0/0x28
> [<c1153232>] ? elv_set_request+0x12/0x20
> [<c115590d>] ? get_request+0x193/0x208
> [<c115599b>] ? get_request_wait+0x19/0xe8
> [<c11ff29e>] scsi_execute+0xbe/0x101
> [<c11ff333>] scsi_execute_req+0x52/0x7f
> [<c1208f08>] sd_revalidate_disk+0xfe/0x104c
> [<c1020000>] ? sys_gettimeofday+0xa/0x58
> [<c1209f28>] sd_probe_async+0xd2/0x1a7
> [<c102ef5f>] async_thread+0xdc/0x1b3
> [<c101ad10>] ? T.809+0x26/0x57
> [<c101a883>] ? default_wake_function+0x0/0xd
> [<c102ee83>] ? async_thread+0x0/0x1b3
> [<c102a7b5>] kthread+0x5e/0x63
> [<c102a757>] ? kthread+0x0/0x63
> [<c1002bb6>] kernel_thread_helper+0x6/0x10
> sd 2:0:0:0: timing out command, waited 180s
> sd 2:0:0:0: timing out command, waited 180s
> sd 2:0:0:0: [sdb] Unit Not Ready
> sd 2:0:0:0: [sdb] Sense Key : 0x4 [current]
> sd 2:0:0:0: [sdb] ASC=0x3e ASCQ=0x1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Maciej Rutecki
http://www.maciek.unixy.pl
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists