| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <r2x80b317761004250957l66922ba3x3a52b16e800ddf26@mail.gmail.com>
Date: Sun, 25 Apr 2010 18:57:45 +0200
From: Richard Genoud <richard.genoud@...il.com>
To: Robert Hancock <hancockrwd@...il.com>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [bug ?] device reported invalid CHS sector 0 / NCQ disabled due
to excessive errors
2010/4/25 Robert Hancock <hancockrwd@...il.com>:
> Usually this sort of thing is some kind of hardware problem - either a
> firmware bug in the drive, or else a SATA link communication problem like a
> bad cable, or the drives not getting clean power under load.
I'll try other sata cables, but I'm afraid, like you said, that it's a
firmware bug...
> The log is missing the detail messages indicating what actually happened -
> can you post the output from dmesg instead?
you're right, there's more informations in there :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.9-hpet (richard@...ktop) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #1 SMP Tue Apr 13 18:59:03
CEST 2010 (Ubuntu 2.6.31-20.58-generic)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31.9-hpet
root=/dev/md1 ro splash enable_mtrr_cleanup
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] total RAM coverred: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf770 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf770000 (usable)
[ 0.000000] modified: 00000000bf770000 - 00000000bf788000 (ACPI data)
[ 0.000000] modified: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf770000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf770000 page 4k
[ 0.000000] kernel direct mapping tables up to bf770000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] RAMDISK: 33f4a000 - 37fef38e
[ 0.000000] ACPI: RSDP 00000000000fb970 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf770100 0006C (v01 022310 XSDT1106
20100223 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v03 022310 FACP1106
20100223 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7704a0 0EE9D (v01 A1326 A1326001
00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf788000 00040
[ 0.000000] ACPI: APIC 00000000bf770390 000CC (v01 022310 APIC1106
20100223 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf770460 0003C (v01 022310 OEMMCFG
20100223 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf788040 00072 (v01 022310 OEMB1106
20100223 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf77f7a0 00038 (v01 022310 OEMHPET
20100223 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7880c0 00090 (v01 AMI OEMDMAR
00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf77fa40 00034 (v06 022310 PerfTune
20100223 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf77fa80 000B0 (v01 022310 OEMOSFR
20100223 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf78ac00 00363 (v01 DpgPmm CpuPm
00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000014000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000003ffff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019c720c] TEXT DATA BSS ==>
[0001000000 - 00019c720c]
[ 0.000000] #3 [0033f4a000 - 0037fef38e] RAMDISK ==>
[0033f4a000 - 0037fef38e]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==>
[000009e800 - 0000100000]
[ 0.000000] #5 [00019c8000 - 00019c82bc] BRK ==>
[00019c8000 - 00019c82bc]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==>
[0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==>
[0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf770
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046270
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3822 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765864 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf770000 - 00000000bf788000
[ 0.000000] PM: Registered nosave memory: 00000000bf788000 - 00000000bf7dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static
data 90720 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1028246
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31.9-hpet
root=/dev/md1 ro splash enable_mtrr_cleanup
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3984372k/5242880k available (5262k kernel code,
1057800k absent, 200708k reserved, 2952k data, 664k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2808.454 MHz processor.
[ 0.001084] Console: colour VGA+ 80x25
[ 0.001086] console [tty0] enabled
[ 0.013995] allocated 41943040 bytes of page_cgroup
[ 0.014043] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.014215] hpet clockevent registered
[ 0.014221] alloc irq_desc for 24 on node 0
[ 0.014223] alloc kstat_irqs on node 0
[ 0.014228] alloc irq_desc for 25 on node 0
[ 0.014229] alloc kstat_irqs on node 0
[ 0.014231] alloc irq_desc for 26 on node 0
[ 0.014232] alloc kstat_irqs on node 0
[ 0.014235] alloc irq_desc for 27 on node 0
[ 0.014236] alloc kstat_irqs on node 0
[ 0.014238] alloc irq_desc for 28 on node 0
[ 0.014239] alloc kstat_irqs on node 0
[ 0.014241] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.014293] Calibrating delay loop (skipped), value calculated
using timer frequency.. 5616.90 BogoMIPS (lpj=28084540)
[ 0.014397] Security Framework initialized
[ 0.014452] AppArmor: AppArmor initialized
[ 0.014714] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.015490] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015841] Mount-cache hash table entries: 256
[ 0.015957] Initializing cgroup subsys ns
[ 0.016003] Initializing cgroup subsys cpuacct
[ 0.016049] Initializing cgroup subsys memory
[ 0.016096] Initializing cgroup subsys freezer
[ 0.016141] Initializing cgroup subsys net_cls
[ 0.016193] CPU: Physical Processor ID: 0
[ 0.016237] CPU: Processor Core ID: 0
[ 0.016283] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016354] CPU: L2 cache: 256K
[ 0.016397] CPU: L3 cache: 8192K
[ 0.016440] CPU 0/0x0 -> Node 0
[ 0.016484] mce: CPU supports 9 MCE banks
[ 0.016535] CPU0: Thermal monitoring enabled (TM1)
[ 0.016582] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.016791] using mwait in idle threads.
[ 0.016835] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.016938] ... version: 3
[ 0.016982] ... bit width: 48
[ 0.017027] ... generic counters: 4
[ 0.017071] ... value mask: 0000ffffffffffff
[ 0.017117] ... max period: 000000007fffffff
[ 0.017163] ... fixed-purpose counters: 3
[ 0.017208] ... counter mask: 000000070000000f
[ 0.019404] ACPI: Core revision 20090521
[ 0.115249] Setting APIC routing to flat
[ 0.115610] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215496] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.333790] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.344295] Initializing CPU#1
[ 0.493453] Calibrating delay using timer specific routine..
5617.34 BogoMIPS (lpj=28086749)
[ 0.493458] CPU: Physical Processor ID: 0
[ 0.493459] CPU: Processor Core ID: 1
[ 0.493461] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.493462] CPU: L2 cache: 256K
[ 0.493463] CPU: L3 cache: 8192K
[ 0.493464] CPU 1/0x2 -> Node 0
[ 0.493467] mce: CPU supports 9 MCE banks
[ 0.493474] CPU1: Thermal monitoring enabled (TM1)
[ 0.493476] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.494069] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.494683] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.495330] Skipping synchronization checks as TSC is reliable.
[ 0.495434] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.505793] Initializing CPU#2
[ 0.653195] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086779)
[ 0.653201] CPU: Physical Processor ID: 0
[ 0.653202] CPU: Processor Core ID: 2
[ 0.653203] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.653205] CPU: L2 cache: 256K
[ 0.653205] CPU: L3 cache: 8192K
[ 0.653207] CPU 2/0x4 -> Node 0
[ 0.653209] mce: CPU supports 9 MCE banks
[ 0.653216] CPU2: Thermal monitoring enabled (TM1)
[ 0.653219] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.653806] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.654378] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.655025] Skipping synchronization checks as TSC is reliable.
[ 0.655130] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.665489] Initializing CPU#3
[ 0.812937] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086772)
[ 0.812943] CPU: Physical Processor ID: 0
[ 0.812944] CPU: Processor Core ID: 3
[ 0.812946] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.812947] CPU: L2 cache: 256K
[ 0.812948] CPU: L3 cache: 8192K
[ 0.812949] CPU 3/0x6 -> Node 0
[ 0.812951] mce: CPU supports 9 MCE banks
[ 0.812958] CPU3: Thermal monitoring enabled (TM1)
[ 0.812961] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.813552] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.814175] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.814822] Skipping synchronization checks as TSC is reliable.
[ 0.814932] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.825292] Initializing CPU#4
[ 0.972680] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086756)
[ 0.972687] CPU: Physical Processor ID: 0
[ 0.972688] CPU: Processor Core ID: 0
[ 0.972690] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.972691] CPU: L2 cache: 256K
[ 0.972692] CPU: L3 cache: 8192K
[ 0.972694] CPU 4/0x1 -> Node 0
[ 0.972697] mce: CPU supports 9 MCE banks
[ 0.972705] CPU4: Thermal monitoring enabled (TM1)
[ 0.972707] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.973425] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.974173] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.974819] Skipping synchronization checks as TSC is reliable.
[ 0.974926] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.985185] Initializing CPU#5
[ 1.132422] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086767)
[ 1.132428] CPU: Physical Processor ID: 0
[ 1.132429] CPU: Processor Core ID: 1
[ 1.132430] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.132432] CPU: L2 cache: 256K
[ 1.132432] CPU: L3 cache: 8192K
[ 1.132434] CPU 5/0x3 -> Node 0
[ 1.132436] mce: CPU supports 9 MCE banks
[ 1.132443] CPU5: Thermal monitoring enabled (TM1)
[ 1.132445] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.133187] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 1.133975] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 1.134621] Skipping synchronization checks as TSC is reliable.
[ 1.134726] Booting processor 6 APIC 0x5 ip 0x6000
[ 1.145085] Initializing CPU#6
[ 1.292165] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086752)
[ 1.292170] CPU: Physical Processor ID: 0
[ 1.292171] CPU: Processor Core ID: 2
[ 1.292173] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.292174] CPU: L2 cache: 256K
[ 1.292175] CPU: L3 cache: 8192K
[ 1.292176] CPU 6/0x5 -> Node 0
[ 1.292178] mce: CPU supports 9 MCE banks
[ 1.292185] CPU6: Thermal monitoring enabled (TM1)
[ 1.292188] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.292926] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 1.293771] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 1.294418] Skipping synchronization checks as TSC is reliable.
[ 1.294525] Booting processor 7 APIC 0x7 ip 0x6000
[ 1.304883] Initializing CPU#7
[ 1.451907] Calibrating delay using timer specific routine..
5617.35 BogoMIPS (lpj=28086763)
[ 1.451913] CPU: Physical Processor ID: 0
[ 1.451913] CPU: Processor Core ID: 3
[ 1.451915] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.451916] CPU: L2 cache: 256K
[ 1.451917] CPU: L3 cache: 8192K
[ 1.451919] CPU 7/0x7 -> Node 0
[ 1.451920] mce: CPU supports 9 MCE banks
[ 1.451928] CPU7: Thermal monitoring enabled (TM1)
[ 1.451930] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.452675] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 1.453470] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 1.454116] Skipping synchronization checks as TSC is reliable.
[ 1.454175] Brought up 8 CPUs
[ 1.454218] Total of 8 processors activated (44938.37 BogoMIPS).
[ 1.454316] CPU0 attaching sched-domain:
[ 1.454318] domain 0: span 0,4 level SIBLING
[ 1.454319] groups: 0 4
[ 1.454322] domain 1: span 0-7 level MC
[ 1.454323] groups: 0,4 1,5 2,6 3,7
[ 1.454327] CPU1 attaching sched-domain:
[ 1.454329] domain 0: span 1,5 level SIBLING
[ 1.454330] groups: 1 5
[ 1.454332] domain 1: span 0-7 level MC
[ 1.454333] groups: 1,5 2,6 3,7 0,4
[ 1.454337] CPU2 attaching sched-domain:
[ 1.454338] domain 0: span 2,6 level SIBLING
[ 1.454340] groups: 2 6
[ 1.454342] domain 1: span 0-7 level MC
[ 1.454343] groups: 2,6 3,7 0,4 1,5
[ 1.454346] CPU3 attaching sched-domain:
[ 1.454348] domain 0: span 3,7 level SIBLING
[ 1.454349] groups: 3 7
[ 1.454351] domain 1: span 0-7 level MC
[ 1.454352] groups: 3,7 0,4 1,5 2,6
[ 1.454356] CPU4 attaching sched-domain:
[ 1.454357] domain 0: span 0,4 level SIBLING
[ 1.454358] groups: 4 0
[ 1.454360] domain 1: span 0-7 level MC
[ 1.454362] groups: 0,4 1,5 2,6 3,7
[ 1.454365] CPU5 attaching sched-domain:
[ 1.454366] domain 0: span 1,5 level SIBLING
[ 1.454367] groups: 5 1
[ 1.454369] domain 1: span 0-7 level MC
[ 1.454371] groups: 1,5 2,6 3,7 0,4
[ 1.454374] CPU6 attaching sched-domain:
[ 1.454375] domain 0: span 2,6 level SIBLING
[ 1.454377] groups: 6 2
[ 1.454379] domain 1: span 0-7 level MC
[ 1.454380] groups: 2,6 3,7 0,4 1,5
[ 1.454383] CPU7 attaching sched-domain:
[ 1.454385] domain 0: span 3,7 level SIBLING
[ 1.454386] groups: 7 3
[ 1.454388] domain 1: span 0-7 level MC
[ 1.454389] groups: 3,7 0,4 1,5 2,6
[ 1.454678] Booting paravirtualized kernel on bare hardware
[ 1.454848] regulator: core version 0.5
[ 1.454914] Time: 10:10:23 Date: 04/25/10
[ 1.454986] NET: Registered protocol family 16
[ 1.455105] ACPI: bus type pci registered
[ 1.455195] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.455244] PCI: Not using MMCONFIG.
[ 1.455288] PCI: Using configuration type 1 for base access
[ 1.455882] bio: create slab <bio-0> at 0
[ 1.456715] ACPI: EC: Look up EC in DSDT
[ 1.469580] ACPI: Interpreter enabled
[ 1.469625] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.469815] ACPI: Using IOAPIC for interrupt routing
[ 1.469901] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.472632] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 1.477189] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.484686] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.484735] ACPI: EC: driver started in poll mode
[ 1.484847] ACPI Warning: Incorrect checksum in table [OEMB] - 0F,
should be 0E 20090521 tbutils-246
[ 1.485096] ACPI: No dock devices found.
[ 1.485395] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.485530] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.485580] pci 0000:00:03.0: PME# disabled
[ 1.485860] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbafe000-0xfbafe3ff]
[ 1.485908] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.485957] pci 0000:00:1a.0: PME# disabled
[ 1.486035] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbaf8000-0xfbafbfff]
[ 1.486070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.486120] pci 0000:00:1b.0: PME# disabled
[ 1.486212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.486261] pci 0000:00:1c.0: PME# disabled
[ 1.486356] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.486405] pci 0000:00:1c.4: PME# disabled
[ 1.486498] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.486548] pci 0000:00:1c.5: PME# disabled
[ 1.486640] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.486689] pci 0000:00:1c.6: PME# disabled
[ 1.486784] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.486833] pci 0000:00:1c.7: PME# disabled
[ 1.486920] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbafd000-0xfbafd3ff]
[ 1.486968] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.487018] pci 0000:00:1d.0: PME# disabled
[ 1.487217] pci 0000:00:1f.2: reg 10 io port: [0xa880-0xa887]
[ 1.487222] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803]
[ 1.487227] pci 0000:00:1f.2: reg 18 io port: [0xa480-0xa487]
[ 1.487231] pci 0000:00:1f.2: reg 1c io port: [0xa400-0xa403]
[ 1.487236] pci 0000:00:1f.2: reg 20 io port: [0xa080-0xa09f]
[ 1.487240] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbaf7000-0xfbaf77ff]
[ 1.487267] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.487314] pci 0000:00:1f.2: PME# disabled
[ 1.487381] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbafc000-0xfbafc0ff]
[ 1.487392] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff]
[ 1.487432] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.487440] pci 0000:01:00.0: reg 18 64bit mmio: [0xfbbe0000-0xfbbeffff]
[ 1.487444] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 1.487451] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbbc0000-0xfbbdffff]
[ 1.487467] pci 0000:01:00.0: supports D1 D2
[ 1.487495] pci 0000:01:00.1: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff]
[ 1.487525] pci 0000:01:00.1: supports D1 D2
[ 1.487553] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff]
[ 1.487556] pci 0000:00:03.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[ 1.487560] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 1.487753] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfa000-0xfbdfbfff]
[ 1.487788] pci 0000:03:00.0: PME# supported from D3hot
[ 1.487838] pci 0000:03:00.0: PME# disabled
[ 1.487930] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[ 1.487938] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[ 1.487946] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[ 1.487953] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[ 1.487961] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[ 1.488043] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
[ 1.488046] pci 0000:00:1c.6: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 1.488091] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 1.488109] pci 0000:02:00.0: reg 18 64bit mmio: [0xfafff000-0xfaffffff]
[ 1.488121] pci 0000:02:00.0: reg 20 64bit mmio: [0xfaff8000-0xfaffbfff]
[ 1.488128] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbcf0000-0xfbcfffff]
[ 1.488164] pci 0000:02:00.0: supports D1 D2
[ 1.488166] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.488217] pci 0000:02:00.0: PME# disabled
[ 1.488312] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff]
[ 1.488315] pci 0000:00:1c.7: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
[ 1.488319] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]
[ 1.488354] pci 0000:07:04.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff]
[ 1.488360] pci 0000:07:04.0: reg 14 io port: [0xec00-0xec7f]
[ 1.488398] pci 0000:07:04.0: supports D2
[ 1.488400] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold
[ 1.488449] pci 0000:07:04.0: PME# disabled
[ 1.488529] pci 0000:00:1e.0: transparent bridge
[ 1.488576] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 1.488579] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 1.488608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.488747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 1.488850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 1.488903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.488948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 1.488994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 1.489039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 1.489094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 1.506815] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.507256] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.507479] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.507918] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.508357] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12
14 15) *0, disabled.
[ 1.508860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.509298] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.509736] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.510187] SCSI subsystem initialized
[ 1.510310] libata version 3.00 loaded.
[ 1.510350] usbcore: registered new interface driver usbfs
[ 1.510402] usbcore: registered new interface driver hub
[ 1.510465] usbcore: registered new device driver usb
[ 1.510579] ACPI: WMI: Mapper loaded
[ 1.511259] PCI: Using ACPI for IRQ routing
[ 1.531794] Bluetooth: Core ver 2.15
[ 1.531867] NET: Registered protocol family 31
[ 1.531912] Bluetooth: HCI device and connection manager initialized
[ 1.531960] Bluetooth: HCI socket layer initialized
[ 1.532006] NetLabel: Initializing
[ 1.532049] NetLabel: domain hash size = 128
[ 1.532093] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.532146] NetLabel: unlabeled traffic allowed by default
[ 1.532227] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 1.532515] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.541788] hpet: hpet2 irq 24 for MSI
[ 1.542949] hpet: hpet3 irq 25 for MSI
[ 1.552923] hpet: hpet4 irq 26 for MSI
[ 1.562916] hpet: hpet5 irq 27 for MSI
[ 1.563214] hpet: hpet6 irq 28 for MSI
[ 1.581758] Switched to high resolution mode on CPU 0
[ 1.582898] Switched to high resolution mode on CPU 2
[ 1.582905] Switched to high resolution mode on CPU 3
[ 1.582911] Switched to high resolution mode on CPU 1
[ 1.583203] Switched to high resolution mode on CPU 4
[ 1.583240] Switched to high resolution mode on CPU 6
[ 1.583248] Switched to high resolution mode on CPU 5
[ 1.583251] Switched to high resolution mode on CPU 7
[ 1.601729] pnp: PnP ACPI init
[ 1.601790] ACPI: bus type pnp registered
[ 1.604294] pnp: PnP ACPI: found 16 devices
[ 1.604340] ACPI: ACPI bus type pnp unregistered
[ 1.604391] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.604441] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 1.604491] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 1.604540] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 1.604592] system 00:06: ioport range 0x290-0x29f has been reserved
[ 1.604643] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.604691] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.604739] system 00:07: ioport range 0x500-0x57f has been reserved
[ 1.604788] system 00:07: ioport range 0x600-0x607 has been reserved
[ 1.604837] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.604886] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.604936] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 1.604987] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
[ 1.605039] system 00:0c: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 1.605100] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.605152] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.605204] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 1.605252] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 1.605301] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 1.605351] system 00:0f: iomem range 0x100000-0xbfffffff could not
be reserved
[ 1.605412] system 00:0f: iomem range 0xfed90000-0xffffffff could
not be reserved
[ 1.610063] AppArmor: AppArmor Filesystem Enabled
[ 1.610154] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 1.610202] pci 0000:00:03.0: IO window: 0xb000-0xbfff
[ 1.610251] pci 0000:00:03.0: MEM window: 0xfbb00000-0xfbbfffff
[ 1.610300] pci 0000:00:03.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 1.610363] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:06
[ 1.610410] pci 0000:00:1c.0: IO window: disabled
[ 1.610458] pci 0000:00:1c.0: MEM window: disabled
[ 1.610505] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.610553] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 1.610600] pci 0000:00:1c.4: IO window: disabled
[ 1.610648] pci 0000:00:1c.4: MEM window: disabled
[ 1.610695] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.610744] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 1.610791] pci 0000:00:1c.5: IO window: disabled
[ 1.610838] pci 0000:00:1c.5: MEM window: disabled
[ 1.610886] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.610934] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03
[ 1.610982] pci 0000:00:1c.6: IO window: 0xd000-0xdfff
[ 1.611031] pci 0000:00:1c.6: MEM window: 0xfbd00000-0xfbdfffff
[ 1.611080] pci 0000:00:1c.6: PREFETCH window: disabled
[ 1.611128] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02
[ 1.611176] pci 0000:00:1c.7: IO window: 0xc000-0xcfff
[ 1.611225] pci 0000:00:1c.7: MEM window: 0xfbc00000-0xfbcfffff
[ 1.611274] pci 0000:00:1c.7: PREFETCH window:
0x000000faf00000-0x000000faffffff
[ 1.611339] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 1.611387] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 1.611436] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff
[ 1.611485] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.611537] alloc irq_desc for 16 on node 0
[ 1.611538] alloc kstat_irqs on node 0
[ 1.611542] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.611592] pci 0000:00:03.0: setting latency timer to 64
[ 1.611597] alloc irq_desc for 17 on node 0
[ 1.611598] alloc kstat_irqs on node 0
[ 1.611601] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.611651] pci 0000:00:1c.0: setting latency timer to 64
[ 1.611656] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.611712] pci 0000:00:1c.4: setting latency timer to 64
[ 1.611717] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.611767] pci 0000:00:1c.5: setting latency timer to 64
[ 1.611772] alloc irq_desc for 18 on node 0
[ 1.611773] alloc kstat_irqs on node 0
[ 1.611776] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.611826] pci 0000:00:1c.6: setting latency timer to 64
[ 1.611831] alloc irq_desc for 19 on node 0
[ 1.611832] alloc kstat_irqs on node 0
[ 1.611834] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.611885] pci 0000:00:1c.7: setting latency timer to 64
[ 1.611889] pci 0000:00:1e.0: setting latency timer to 64
[ 1.611892] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.611894] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.611895] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 1.611897] pci_bus 0000:01: resource 1 mem: [0xfbb00000-0xfbbfffff]
[ 1.611899] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 1.611900] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 1.611902] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 1.611904] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 1.611905] pci_bus 0000:02: resource 1 mem: [0xfbc00000-0xfbcfffff]
[ 1.611907] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff]
[ 1.611908] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 1.611910] pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 1.611911] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 1.611913] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.611933] NET: Registered protocol family 2
[ 1.612087] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.612793] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.615031] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.615345] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.615394] TCP reno registered
[ 1.615502] NET: Registered protocol family 1
[ 1.615584] Trying to unpack rootfs image as initramfs...
[ 2.633306] Freeing initrd memory: 66196k freed
[ 2.642103] Scanning for low memory corruption every 60 seconds
[ 2.642230] audit: initializing netlink socket (disabled)
[ 2.642286] type=2000 audit(1272190224.430:1): initialized
[ 2.649418] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.650419] VFS: Disk quotas dquot_6.5.2
[ 2.650499] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.650934] fuse init (API version 7.12)
[ 2.651029] msgmni has been set to 7911
[ 2.651240] alg: No test for stdrng (krng)
[ 2.651291] io scheduler noop registered
[ 2.651336] io scheduler anticipatory registered
[ 2.651381] io scheduler deadline registered
[ 2.651453] io scheduler cfq registered (default)
[ 2.689907] pci 0000:01:00.0: Boot video device
[ 2.690029] alloc irq_desc for 29 on node 0
[ 2.690031] alloc kstat_irqs on node 0
[ 2.690037] pcieport-driver 0000:00:03.0: irq 29 for MSI/MSI-X
[ 2.690042] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 2.690134] alloc irq_desc for 30 on node 0
[ 2.690135] alloc kstat_irqs on node 0
[ 2.690141] pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X
[ 2.690147] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.690244] alloc irq_desc for 31 on node 0
[ 2.690245] alloc kstat_irqs on node 0
[ 2.690250] pcieport-driver 0000:00:1c.4: irq 31 for MSI/MSI-X
[ 2.690256] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 2.690350] alloc irq_desc for 32 on node 0
[ 2.690352] alloc kstat_irqs on node 0
[ 2.690357] pcieport-driver 0000:00:1c.5: irq 32 for MSI/MSI-X
[ 2.690363] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 2.690458] alloc irq_desc for 33 on node 0
[ 2.690460] alloc kstat_irqs on node 0
[ 2.690465] pcieport-driver 0000:00:1c.6: irq 33 for MSI/MSI-X
[ 2.690471] pcieport-driver 0000:00:1c.6: setting latency timer to 64
[ 2.690568] alloc irq_desc for 34 on node 0
[ 2.690569] alloc kstat_irqs on node 0
[ 2.690575] pcieport-driver 0000:00:1c.7: irq 34 for MSI/MSI-X
[ 2.690581] pcieport-driver 0000:00:1c.7: setting latency timer to 64
[ 2.690645] Firmware did not grant requested _OSC control
[ 2.690647] aer 0000:00:03.0:pcie02: AER service couldn't init
device: no _OSC support
[ 2.690653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.690709] Firmware did not grant requested _OSC control
[ 2.690720] Firmware did not grant requested _OSC control
[ 2.690730] Firmware did not grant requested _OSC control
[ 2.690739] Firmware did not grant requested _OSC control
[ 2.690748] Firmware did not grant requested _OSC control
[ 2.690766] Firmware did not grant requested _OSC control
[ 2.690775] Firmware did not grant requested _OSC control
[ 2.690784] Firmware did not grant requested _OSC control
[ 2.690793] Firmware did not grant requested _OSC control
[ 2.690802] Firmware did not grant requested _OSC control
[ 2.690811] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.690927] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.690989] ACPI: Power Button [PWRF]
[ 2.691067] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.691130] ACPI: Power Button [PWRB]
[ 2.692315] ACPI: SSDT 00000000bf788150 0244C (v01 DpgPmm P001Ist
00000011 INTL 20060113)
[ 2.692857] ACPI: SSDT 00000000bf78a5a0 00659 (v01 PmRef P001Cst
00003001 INTL 20060113)
[ 2.693443] Monitor-Mwait will be used to enter C-1 state
[ 2.693457] Monitor-Mwait will be used to enter C-2 state
[ 2.693469] Monitor-Mwait will be used to enter C-3 state
[ 2.693483] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.693648] processor LNXCPU:00: registered as cooling_device0
[ 2.693995] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.694157] processor LNXCPU:01: registered as cooling_device1
[ 2.694512] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 2.694673] processor LNXCPU:02: registered as cooling_device2
[ 2.695018] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 2.695180] processor LNXCPU:03: registered as cooling_device3
[ 2.695530] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 2.695692] processor LNXCPU:04: registered as cooling_device4
[ 2.696044] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 2.696206] processor LNXCPU:05: registered as cooling_device5
[ 2.696547] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 2.696709] processor LNXCPU:06: registered as cooling_device6
[ 2.697050] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 2.697212] processor LNXCPU:07: registered as cooling_device7
[ 2.700147] Linux agpgart interface v0.103
[ 2.700196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.700331] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.700621] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.701247] brd: module loaded
[ 2.701545] loop: module loaded
[ 2.701630] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 2.701742] ahci 0000:00:1f.2: version 3.0
[ 2.701751] alloc irq_desc for 21 on node 0
[ 2.701752] alloc kstat_irqs on node 0
[ 2.701756] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.701826] alloc irq_desc for 35 on node 0
[ 2.701827] alloc kstat_irqs on node 0
[ 2.701833] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X
[ 2.701855] ahci: SSS flag set, parallel bus scan disabled
[ 2.719878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3
Gbps 0x3f impl SATA mode
[ 2.719947] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led
clo pmp pio slum part ems
[ 2.720011] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.819723] scsi0 : ahci
[ 2.819817] scsi1 : ahci
[ 2.819888] scsi2 : ahci
[ 2.819960] scsi3 : ahci
[ 2.820034] scsi4 : ahci
[ 2.820104] scsi5 : ahci
[ 2.820226] ata1: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7100 irq 35
[ 2.820288] ata2: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7180 irq 35
[ 2.820349] ata3: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7200 irq 35
[ 2.820411] ata4: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7280 irq 35
[ 2.820472] ata5: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7300 irq 35
[ 2.820534] ata6: SATA max UDMA/133 abar m2048@...baf7000 port
0xfbaf7380 irq 35
[ 2.820630] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.839665] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3
Gbps 0x3 impl SATA mode
[ 2.839736] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
[ 2.839787] ahci 0000:03:00.0: setting latency timer to 64
[ 2.839869] scsi6 : ahci
[ 2.839939] scsi7 : ahci
[ 2.840024] ata7: SATA max UDMA/133 abar m8192@...bdfa000 port
0xfbdfa100 irq 18
[ 2.840086] ata8: SATA max UDMA/133 abar m8192@...bdfa000 port
0xfbdfa180 irq 18
[ 2.840366] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 2.840443] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.840482] scsi8 : pata_jmicron
[ 2.840556] scsi9 : pata_jmicron
[ 2.840999] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 2.841049] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma
0xd408 irq 19
[ 2.841399] Fixed MDIO Bus: probed
[ 2.841461] PPP generic driver version 2.4.2
[ 2.841550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.842257] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.842314] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.842317] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.842380] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 2.846324] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.846372] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 2.846381] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbafe000
[ 2.869587] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.869688] usb usb1: configuration #1 chosen from 1 choice
[ 2.869752] hub 1-0:1.0: USB hub found
[ 2.869799] hub 1-0:1.0: 2 ports detected
[ 2.869886] alloc irq_desc for 23 on node 0
[ 2.869888] alloc kstat_irqs on node 0
[ 2.869892] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.869948] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.869951] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.870014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 2.873959] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.874008] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 2.874017] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbafd000
[ 2.889554] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.889646] usb usb2: configuration #1 chosen from 1 choice
[ 2.889706] hub 2-0:1.0: USB hub found
[ 2.889752] hub 2-0:1.0: 2 ports detected
[ 2.889830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.889885] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.889988] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.890036] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 2.890558] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.890642] mice: PS/2 mouse device common for all mice
[ 2.890734] rtc_cmos 00:03: RTC can wake from S4
[ 2.890795] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.890864] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.890989] device-mapper: uevent: version 1.0.3
[ 2.891077] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@...hat.com
[ 2.891221] device-mapper: multipath: version 1.1.0 loaded
[ 2.891268] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.891629] cpuidle: using governor ladder
[ 2.891902] cpuidle: using governor menu
[ 2.892213] TCP cubic registered
[ 2.892336] NET: Registered protocol family 10
[ 2.892676] lo: Disabled Privacy Extensions
[ 2.892910] NET: Registered protocol family 17
[ 2.892963] Bluetooth: L2CAP ver 2.13
[ 2.893007] Bluetooth: L2CAP socket layer initialized
[ 2.893053] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.893098] Bluetooth: SCO socket layer initialized
[ 2.893155] Bluetooth: RFCOMM TTY layer initialized
[ 2.893201] Bluetooth: RFCOMM socket layer initialized
[ 2.893247] Bluetooth: RFCOMM ver 1.11
[ 2.895830] PM: Resume from disk failed.
[ 2.895835] registered taskstats version 1
[ 2.895954] Magic number: 6:541:174
[ 2.896012] acpi device:37: hash matches
[ 2.896063] acpi device:0a: hash matches
[ 2.896205] rtc_cmos 00:03: setting system clock to 2010-04-25
10:10:25 UTC (1272190225)
[ 2.896275] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.896321] EDD information not available.
[ 2.910176] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 2.999819] ata9.01: NODEV after polling detection
[ 3.020272] ata9.00: ATAPI: PLEXTOR DVDR PX-740A, 1.02, max UDMA/33
[ 3.063942] ata9.00: configured for UDMA/33
[ 3.189223] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.189314] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.199196] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.348939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.353763] usb 1-1: configuration #1 chosen from 1 choice
[ 3.354099] hub 1-1:1.0: USB hub found
[ 3.354271] hub 1-1:1.0: 6 ports detected
[ 3.366808] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133
[ 3.366869] ata1.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.368030] ata1.00: configured for UDMA/133
[ 3.391488] scsi 0:0:0:0: Direct-Access ATA
HDS728080PLA380 PF2O PQ: 0 ANSI: 5
[ 3.391719] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.391791] sd 0:0:0:0: [sda] 160836480 512-byte logical blocks:
(82.3 GB/76.6 GiB)
[ 3.391872] sd 0:0:0:0: [sda] Write Protect is off
[ 3.391918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.391932] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.392049] sda: sda1 sda2 sda3 sda4
[ 3.416551] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.468697] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.622267] usb 2-1: configuration #1 chosen from 1 choice
[ 3.622527] hub 2-1:1.0: USB hub found
[ 3.622725] hub 2-1:1.0: 8 ports detected
[ 3.698488] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[ 3.811025] usb 1-1.3: configuration #1 chosen from 1 choice
[ 3.898186] usb 2-1.3: new low speed USB device using ehci_hcd and address 3
[ 4.013452] usb 2-1.3: configuration #1 chosen from 1 choice
[ 4.087907] usb 2-1.4: new high speed USB device using ehci_hcd and address 4
[ 4.275954] usb 2-1.4: configuration #1 chosen from 1 choice
[ 4.317329] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.338405] ata2.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133
[ 4.338466] ata2.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.339643] ata2.00: configured for UDMA/133
[ 4.357432] scsi 1:0:0:0: Direct-Access ATA
HDS728080PLA380 PF2O PQ: 0 ANSI: 5
[ 4.357638] usb 2-1.6: new low speed USB device using ehci_hcd and address 5
[ 4.357640] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.357661] sd 1:0:0:0: [sdb] 160836480 512-byte logical blocks:
(82.3 GB/76.6 GiB)
[ 4.357690] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.357691] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.357702] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.357770] sdb: sdb1 sdb2 sdb3 sdb4
[ 4.379765] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.475732] usb 2-1.6: configuration #1 chosen from 1 choice
[ 5.285674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.305917] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 5.305979] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.307132] ata3.00: configured for UDMA/133
[ 5.325721] scsi 2:0:0:0: Direct-Access ATA Hitachi
HDP72505 GM4O PQ: 0 ANSI: 5
[ 5.325955] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.325964] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 5.325992] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.325993] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.326003] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.326054] sdc: sdc1
[ 5.355506] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.675046] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.044399] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.413775] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.436201] scsi 8:0:0:0: CD-ROM PLEXTOR DVDR PX-740A
1.02 PQ: 0 ANSI: 5
[ 6.444707] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 6.444757] Uniform CD-ROM driver Revision: 3.20
[ 6.444839] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 6.444858] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 6.615290] Freeing unused kernel memory: 664k freed
[ 6.615414] Write protecting the kernel read-only data: 7476k
[ 6.691457] [drm] Initialized drm 1.1.0 20060810
[ 6.698176] Initializing USB Mass Storage driver...
[ 6.698329] scsi10 : SCSI emulation for USB Mass Storage devices
[ 6.698445] usb-storage: device found at 3
[ 6.698447] usb-storage: waiting for device to settle before scanning
[ 6.698467] usbcore: registered new interface driver usb-storage
[ 6.698515] USB Mass Storage support registered.
[ 6.701141] usbcore: registered new interface driver hiddev
[ 6.704958] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4
[ 6.705151] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-1.3/input0
[ 6.708744] input: PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input5
[ 6.708912] generic-usb 0003:1267:0210.0002: input,hidraw1: USB HID
v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1.6/input0
[ 6.708987] usbcore: registered new interface driver usbhid
[ 6.709034] usbhid: v2.6:USB HID core driver
[ 6.711805] [drm] radeon default to kernel modesetting DISABLED.
[ 6.712260] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.712322] pci 0000:01:00.0: setting latency timer to 64
[ 6.712492] [drm] Initialized radeon 1.31.0 20080528 for
0000:01:00.0 on minor 0
[ 6.722249] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.722315] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.722435] r8169 0000:02:00.0: setting latency timer to 64
[ 6.722478] alloc irq_desc for 36 on node 0
[ 6.722480] alloc kstat_irqs on node 0
[ 6.722491] r8169 0000:02:00.0: irq 36 for MSI/MSI-X
[ 6.723282] eth0: RTL8168d/8111d at 0xffffc90000668000,
e0:cb:4e:1b:b7:84, XID 283000c0 IRQ 36
[ 6.727197] ohci1394 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.795119] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[fbeff000-fbeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.813895] md: bind<sdb2>
[ 6.815124] md: bind<sdb1>
[ 6.818032] md: bind<sdb3>
[ 6.818474] md: bind<sdb4>
[ 6.829803] md: bind<sda2>
[ 6.833570] md: raid1 personality registered for level 1
[ 6.833934] raid1: raid set md1 active with 2 out of 2 mirrors
[ 6.834024] md1: detected capacity change from 0 to 15002828800
[ 6.834904] md: bind<sda3>
[ 6.835312] md1:
[ 6.836359] md: bind<sda4>
[ 6.836531] raid1: raid set md2 active with 2 out of 2 mirrors
[ 6.836587] md2: detected capacity change from 0 to 66599976960
[ 6.837262] md2:
[ 6.838253] md: raid0 personality registered for level 0
[ 6.838459] raid0: looking at sda4
[ 6.838506] raid0: comparing sda4(1060096)
[ 6.838539] with sda4(1060096)
[ 6.838618] raid0: END
[ 6.838659] raid0: ==> UNIQUE
[ 6.838701] raid0: 1 zones
[ 6.838743] raid0: looking at sdb4
[ 6.839419] raid0: comparing sdb4(1060096)
[ 6.839452] with sda4(1060096)
[ 6.839531] raid0: EQUAL
[ 6.839572] raid0: FINAL 1 zones
[ 6.839615] raid0: done.
[ 6.839656] raid0 : md_size is 2120192 sectors.
[ 6.839701] ******* md3 configuration *********
[ 6.839745] zone0=[sda4/sdb4/]
[ 6.839865] zone offset=0kb device offset=0kb size=1060096kb
[ 6.839912] **********************************
[ 6.839913]
[ 6.839999] md3: detected capacity change from 0 to 1085538304
[ 6.840325] unknown partition table
[ 6.840780] md3:
[ 6.842026] md: bind<sda1>
[ 6.842169] unknown partition table
[ 6.842266] unknown partition table
[ 6.878193] raid1: raid set md0 active with 2 out of 2 mirrors
[ 6.878278] md0: detected capacity change from 0 to 197263360
[ 6.879129] md0: unknown partition table
[ 8.102238] md: linear personality registered for level -1
[ 8.103766] md: multipath personality registered for level -4
[ 8.107046] xor: automatically using best checksumming function: generic_sse
[ 8.153227] generic_sse: 15841.600 MB/sec
[ 8.153228] xor: using function: generic_sse (15841.600 MB/sec)
[ 8.160148] async_tx: api initialized (async)
[ 8.160936] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000c1f807]
[ 8.332917] raid6: int64x1 3005 MB/s
[ 8.502650] raid6: int64x2 3595 MB/s
[ 8.672364] raid6: int64x4 2641 MB/s
[ 8.842089] raid6: int64x8 2657 MB/s
[ 9.011773] raid6: sse2x1 8390 MB/s
[ 9.181500] raid6: sse2x2 9892 MB/s
[ 9.351212] raid6: sse2x4 11141 MB/s
[ 9.351213] raid6: using algorithm sse2x4 (11141 MB/s)
[ 9.353591] md: raid6 personality registered for level 6
[ 9.353593] md: raid5 personality registered for level 5
[ 9.353594] md: raid4 personality registered for level 4
[ 9.357723] md: raid10 personality registered for level 10
[ 9.397848] PM: Starting manual resume from disk
[ 9.397850] PM: Resume from partition 9:3
[ 9.397851] PM: Checking hibernation image.
[ 9.397971] PM: Resume from disk failed.
[ 9.425343] EXT4-fs (md1): barriers enabled
[ 9.435384] kjournald2 starting: pid 552, dev md1:8, commit
interval 5 seconds
[ 9.436592] EXT4-fs (md1): delayed allocation enabled
[ 9.436598] EXT4-fs: file extents enabled
[ 9.437006] EXT4-fs: mballoc enabled
[ 9.437012] EXT4-fs (md1): mounted filesystem with ordered data mode
[ 9.998048] type=1505 audit(1272190232.613:2):
operation="profile_load" pid=586
name=/usr/share/gdm/guest-session/Xsession
[ 10.012342] type=1505 audit(1272190232.625:3):
operation="profile_load" pid=587 name=/sbin/dhclient3
[ 10.012687] type=1505 audit(1272190232.625:4):
operation="profile_load" pid=587
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.012861] type=1505 audit(1272190232.625:5):
operation="profile_load" pid=587
name=/usr/lib/connman/scripts/dhclient-script
[ 10.040097] type=1505 audit(1272190232.653:6):
operation="profile_load" pid=588 name=/usr/bin/evince
[ 10.045203] type=1505 audit(1272190232.653:7):
operation="profile_load" pid=588 name=/usr/bin/evince-previewer
[ 10.048200] type=1505 audit(1272190232.663:8):
operation="profile_load" pid=588 name=/usr/bin/evince-thumbnailer
[ 10.077246] type=1505 audit(1272190232.683:9):
operation="profile_load" pid=590 name=/usr/lib/cups/backend/cups-pdf
[ 10.077627] type=1505 audit(1272190232.693:10):
operation="profile_load" pid=590 name=/usr/sbin/cupsd
[ 10.099442] type=1505 audit(1272190232.713:11):
operation="profile_load" pid=591 name=/usr/sbin/mysqld-akonadi
[ 11.685433] usb-storage: device scan complete
[ 11.686232] scsi 10:0:0:0: Direct-Access Generic USB SD Reader
1.00 PQ: 0 ANSI: 0
[ 11.686970] scsi 10:0:0:1: Direct-Access Generic USB CF Reader
1.01 PQ: 0 ANSI: 0
[ 11.687839] scsi 10:0:0:2: Direct-Access Generic USB SM Reader
1.02 PQ: 0 ANSI: 0
[ 11.688691] scsi 10:0:0:3: Direct-Access Generic USB MS Reader
1.03 PQ: 0 ANSI: 0
[ 11.689426] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 11.689472] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 11.689534] sd 10:0:0:2: Attached scsi generic sg6 type 0
[ 11.689581] sd 10:0:0:3: Attached scsi generic sg7 type 0
[ 11.693110] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 11.693856] sd 10:0:0:1: [sde] Attached SCSI removable disk
[ 11.694609] sd 10:0:0:2: [sdf] Attached SCSI removable disk
[ 11.695444] sd 10:0:0:3: [sdg] Attached SCSI removable disk
[ 28.708824] udev: starting version 147
[ 28.749712] lp: driver loaded but no devices found
[ 28.753665] Linux video capture interface: v2.00
[ 28.756607] uvcvideo: Found UVC 1.00 device ViewSonic 1.3M, USB2.0
Webcam (04f2:b021)
[ 28.760134] input: ViewSonic 1.3M, USB2.0 Webcam as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6
[ 28.760173] usbcore: registered new interface driver uvcvideo
[ 28.760176] USB Video Class driver (v0.1.0)
[ 28.761554] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.842274] alloc irq_desc for 22 on node 0
[ 28.842277] alloc kstat_irqs on node 0
[ 28.842283] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 28.842397] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 29.009593] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 29.009623] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 29.022083] Adding 1060088k swap on /dev/md3. Priority:-1
extents:1 across:1060088k
[ 29.492939] EXT4-fs (md1): internal journal on md1:8
[ 29.879302] EXT4-fs (md0): barriers enabled
[ 29.879608] kjournald2 starting: pid 1214, dev md0:8, commit
interval 5 seconds
[ 29.895604] EXT4-fs (md0): internal journal on md0:8
[ 29.895610] EXT4-fs (md0): delayed allocation enabled
[ 29.895615] EXT4-fs: file extents enabled
[ 29.895652] EXT4-fs: mballoc enabled
[ 29.895669] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 30.575506] EXT4-fs (md2): barriers enabled
[ 30.575930] kjournald2 starting: pid 1227, dev md2:8, commit
interval 5 seconds
[ 30.625268] EXT4-fs (md2): internal journal on md2:8
[ 30.625275] EXT4-fs (md2): delayed allocation enabled
[ 30.625279] EXT4-fs: file extents enabled
[ 30.625439] EXT4-fs: mballoc enabled
[ 30.625447] EXT4-fs (md2): mounted filesystem with ordered data mode
[ 30.686188] r8169: eth0: link up
[ 30.686192] r8169: eth0: link up
[ 30.864001] __ratelimit: 3 callbacks suppressed
[ 30.864003] type=1505 audit(1272190253.513:13):
operation="profile_replace" pid=1396
name=/usr/share/gdm/guest-session/Xsession
[ 30.864982] type=1505 audit(1272190253.513:14):
operation="profile_replace" pid=1397 name=/sbin/dhclient3
[ 30.865297] type=1505 audit(1272190253.513:15):
operation="profile_replace" pid=1397
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 30.865471] type=1505 audit(1272190253.513:16):
operation="profile_replace" pid=1397
name=/usr/lib/connman/scripts/dhclient-script
[ 30.867225] type=1505 audit(1272190253.513:17):
operation="profile_replace" pid=1398 name=/usr/bin/evince
[ 30.872265] type=1505 audit(1272190253.513:18):
operation="profile_replace" pid=1398 name=/usr/bin/evince-previewer
[ 30.875315] type=1505 audit(1272190253.523:19):
operation="profile_replace" pid=1398 name=/usr/bin/evince-thumbnailer
[ 30.880076] type=1505 audit(1272190253.523:20):
operation="profile_replace" pid=1400
name=/usr/lib/cups/backend/cups-pdf
[ 30.880463] type=1505 audit(1272190253.523:21):
operation="profile_replace" pid=1400 name=/usr/sbin/cupsd
[ 30.881725] type=1505 audit(1272190253.523:22):
operation="profile_replace" pid=1401 name=/usr/sbin/mysqld-akonadi
[ 31.641911] usplash:487 freeing invalid memtype
ffffffffd0000000-ffffffffd1000000
[ 32.176982] [drm] Setting GART location based on new memory map
[ 32.192133] [drm] Loading RV710 PFP Microcode
[ 32.192243] [drm] Loading RV710 CP Microcode
[ 32.207430] [drm] Resetting GPU
[ 32.207487] [drm] writeback test succeeded in 1 usecs
[ 34.472120] CPU0 attaching NULL sched-domain.
[ 34.472123] CPU1 attaching NULL sched-domain.
[ 34.472124] CPU2 attaching NULL sched-domain.
[ 34.472125] CPU3 attaching NULL sched-domain.
[ 34.472126] CPU4 attaching NULL sched-domain.
[ 34.472127] CPU5 attaching NULL sched-domain.
[ 34.472128] CPU6 attaching NULL sched-domain.
[ 34.472129] CPU7 attaching NULL sched-domain.
[ 34.515577] CPU0 attaching sched-domain:
[ 34.515579] domain 0: span 0,4 level SIBLING
[ 34.515581] groups: 0 4
[ 34.515583] domain 1: span 0-7 level MC
[ 34.515584] groups: 0,4 1,5 2,6 3,7
[ 34.515587] CPU1 attaching sched-domain:
[ 34.515588] domain 0: span 1,5 level SIBLING
[ 34.515589] groups: 1 5
[ 34.515591] domain 1: span 0-7 level MC
[ 34.515592] groups: 1,5 2,6 3,7 0,4
[ 34.515595] CPU2 attaching sched-domain:
[ 34.515596] domain 0: span 2,6 level SIBLING
[ 34.515597] groups: 2 6
[ 34.515598] domain 1: span 0-7 level MC
[ 34.515600] groups: 2,6 3,7 0,4 1,5
[ 34.515602] CPU3 attaching sched-domain:
[ 34.515603] domain 0: span 3,7 level SIBLING
[ 34.515604] groups: 3 7
[ 34.515606] domain 1: span 0-7 level MC
[ 34.515607] groups: 3,7 0,4 1,5 2,6
[ 34.515610] CPU4 attaching sched-domain:
[ 34.515610] domain 0: span 0,4 level SIBLING
[ 34.515612] groups: 4 0
[ 34.515613] domain 1: span 0-7 level MC
[ 34.515614] groups: 0,4 1,5 2,6 3,7
[ 34.515617] CPU5 attaching sched-domain:
[ 34.515618] domain 0: span 1,5 level SIBLING
[ 34.515619] groups: 5 1
[ 34.515621] domain 1: span 0-7 level MC
[ 34.515622] groups: 1,5 2,6 3,7 0,4
[ 34.515624] CPU6 attaching sched-domain:
[ 34.515625] domain 0: span 2,6 level SIBLING
[ 34.515626] groups: 6 2
[ 34.515628] domain 1: span 0-7 level MC
[ 34.515629] groups: 2,6 3,7 0,4 1,5
[ 34.515632] CPU7 attaching sched-domain:
[ 34.515633] domain 0: span 3,7 level SIBLING
[ 34.515634] groups: 7 3
[ 34.515635] domain 1: span 0-7 level MC
[ 34.515636] groups: 3,7 0,4 1,5 2,6
[ 36.519789] RPC: Registered udp transport module.
[ 36.519791] RPC: Registered tcp transport module.
[ 37.683260] hda-intel: IRQ timing workaround is activated for card
#1. Suggest a bigger bdl_pos_adj.
[ 39.014135] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 39.014137] vboxdrv: Successfully done.
[ 39.014138] vboxdrv: Found 8 processor cores.
[ 39.014177] VBoxDrv: dbg - g_abExecMemory=ffffffffa03d5480
[ 39.015260] vboxdrv: fAsync=0 offMin=0x1f8 offMax=0x2007c
[ 39.015287] vboxdrv: TSC mode is 'synchronous', kernel timer mode
is 'normal'.
[ 39.015289] vboxdrv: Successfully loaded version 3.1.6 (interface
0x00100001).
[ 39.273845] ppdev: user-space parallel port driver
[ 41.031381] eth0: no IPv6 routers present
[ 50.581816] svc: failed to register lockdv1 RPC service (errno 97).
[ 1336.673597] [drm] Resetting GPU
[ 1336.776337] mtrr: MTRR 3 not used
[ 1337.149537] [drm] Setting GART location based on new memory map
[ 1337.164890] [drm] Loading RV710 PFP Microcode
[ 1337.165018] [drm] Loading RV710 CP Microcode
[ 1337.180244] [drm] Resetting GPU
[ 1337.180303] [drm] writeback test succeeded in 1 usecs
[ 9229.608823] [drm] Resetting GPU
[ 9229.683872] mtrr: MTRR 3 not used
[ 9230.074634] [drm] Setting GART location based on new memory map
[ 9230.089988] [drm] Loading RV710 PFP Microcode
[ 9230.090116] [drm] Loading RV710 CP Microcode
[ 9230.105343] [drm] Resetting GPU
[ 9230.105403] [drm] writeback test succeeded in 1 usecs
[10786.234493] kjournald starting. Commit interval 5 seconds
[10786.234555] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[10786.234929] EXT3 FS on sdc1, internal journal
[10786.234936] EXT3-fs: mounted filesystem with writeback data mode.
[11186.941269] kjournald starting. Commit interval 5 seconds
[11186.941284] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[11186.941675] EXT3 FS on sdc1, internal journal
[11186.941683] EXT3-fs: mounted filesystem with writeback data mode.
[16840.450530] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[16840.450535] ata1.00: cmd 61/b8:00:20:d5:8b/02:00:05:00:00/40 tag 0
ncq 356352 out
[16840.450536] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask
0x4 (timeout)
[16840.450538] ata1.00: status: { DRDY }
[16840.450541] ata1.00: cmd 61/80:08:99:bd:86/01:00:09:00:00/40 tag 1
ncq 196608 out
[16840.450542] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[16840.450543] ata1.00: status: { DRDY }
[16840.450546] ata1: hard resetting link
[16840.978820] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[16840.981055] ata1.00: configured for UDMA/133
[16840.981064] ata1.00: device reported invalid CHS sector 0
[16840.981069] ata1.00: device reported invalid CHS sector 0
[16840.981078] ata1: EH complete
[17655.017000] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0
action 0x6 frozen
[17655.017013] ata1.00: cmd 61/00:00:38:01:d0/04:00:06:00:00/40 tag 0
ncq 524288 out
[17655.017016] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask
0x4 (timeout)
[17655.017020] ata1.00: status: { DRDY }
[17655.017029] ata1.00: cmd 61/00:08:38:05:d0/04:00:06:00:00/40 tag 1
ncq 524288 out
[17655.017031] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017035] ata1.00: status: { DRDY }
[17655.017043] ata1.00: cmd 61/00:10:38:09:d0/04:00:06:00:00/40 tag 2
ncq 524288 out
[17655.017045] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017049] ata1.00: status: { DRDY }
[17655.017057] ata1.00: cmd 61/c8:18:38:0d:d0/00:00:06:00:00/40 tag 3
ncq 102400 out
[17655.017059] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017063] ata1.00: status: { DRDY }
[17655.017071] ata1.00: cmd 61/08:20:b0:83:49/00:00:09:00:00/40 tag 4
ncq 4096 out
[17655.017073] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017077] ata1.00: status: { DRDY }
[17655.017085] ata1.00: cmd 61/08:28:f8:7e:17/00:00:03:00:00/40 tag 5
ncq 4096 out
[17655.017087] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017091] ata1.00: status: { DRDY }
[17655.017099] ata1.00: cmd 61/00:30:00:0e:d0/04:00:06:00:00/40 tag 6
ncq 524288 out
[17655.017101] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017105] ata1.00: status: { DRDY }
[17655.017113] ata1.00: cmd 61/00:38:00:12:d0/04:00:06:00:00/40 tag 7
ncq 524288 out
[17655.017115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017119] ata1.00: status: { DRDY }
[17655.017127] ata1.00: cmd 61/00:40:00:16:d0/04:00:06:00:00/40 tag 8
ncq 524288 out
[17655.017129] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017133] ata1.00: status: { DRDY }
[17655.017141] ata1.00: cmd 61/08:48:00:1a:d0/00:00:06:00:00/40 tag 9
ncq 4096 out
[17655.017143] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017147] ata1.00: status: { DRDY }
[17655.017156] ata1.00: cmd 60/08:50:50:01:c5/00:00:06:00:00/40 tag 10
ncq 4096 in
[17655.017158] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017162] ata1.00: status: { DRDY }
[17655.017170] ata1.00: cmd 60/08:58:00:3f:bc/00:00:06:00:00/40 tag 11
ncq 4096 in
[17655.017172] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017176] ata1.00: status: { DRDY }
[17655.017184] ata1.00: cmd 61/10:60:a8:e5:bb/00:00:06:00:00/40 tag 12
ncq 8192 out
[17655.017186] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017190] ata1.00: status: { DRDY }
[17655.017198] ata1.00: cmd 61/10:68:68:e6:bb/00:00:06:00:00/40 tag 13
ncq 8192 out
[17655.017199] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017204] ata1.00: status: { DRDY }
[17655.017211] ata1.00: cmd 61/08:70:a8:e8:bb/00:00:06:00:00/40 tag 14
ncq 4096 out
[17655.017213] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017217] ata1.00: status: { DRDY }
[17655.017225] ata1.00: cmd 61/08:78:60:fc:bb/00:00:06:00:00/40 tag 15
ncq 4096 out
[17655.017227] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017231] ata1.00: status: { DRDY }
[17655.017239] ata1.00: cmd 61/08:80:20:fd:bb/00:00:06:00:00/40 tag 16
ncq 4096 out
[17655.017241] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017245] ata1.00: status: { DRDY }
[17655.017253] ata1.00: cmd 61/00:88:d0:66:c9/04:00:06:00:00/40 tag 17
ncq 524288 out
[17655.017255] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017259] ata1.00: status: { DRDY }
[17655.017267] ata1.00: cmd 61/00:90:d0:6a:c9/04:00:06:00:00/40 tag 18
ncq 524288 out
[17655.017269] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017273] ata1.00: status: { DRDY }
[17655.017281] ata1.00: cmd 61/00:98:d0:6e:c9/04:00:06:00:00/40 tag 19
ncq 524288 out
[17655.017283] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017287] ata1.00: status: { DRDY }
[17655.017295] ata1.00: cmd 61/00:a0:d0:72:c9/04:00:06:00:00/40 tag 20
ncq 524288 out
[17655.017297] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017301] ata1.00: status: { DRDY }
[17655.017309] ata1.00: cmd 61/00:a8:d0:76:c9/04:00:06:00:00/40 tag 21
ncq 524288 out
[17655.017311] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017315] ata1.00: status: { DRDY }
[17655.017323] ata1.00: cmd 61/00:b0:d0:7a:c9/04:00:06:00:00/40 tag 22
ncq 524288 out
[17655.017325] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017329] ata1.00: status: { DRDY }
[17655.017337] ata1.00: cmd 61/60:b8:d0:7e:c9/02:00:06:00:00/40 tag 23
ncq 311296 out
[17655.017339] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017343] ata1.00: status: { DRDY }
[17655.017351] ata1.00: cmd 61/00:c0:38:01:ca/04:00:06:00:00/40 tag 24
ncq 524288 out
[17655.017353] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017357] ata1.00: status: { DRDY }
[17655.017365] ata1.00: cmd 61/00:c8:38:05:ca/04:00:06:00:00/40 tag 25
ncq 524288 out
[17655.017367] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017371] ata1.00: status: { DRDY }
[17655.017379] ata1.00: cmd 61/48:d0:38:09:ca/01:00:06:00:00/40 tag 26
ncq 167936 out
[17655.017381] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017385] ata1.00: status: { DRDY }
[17655.017393] ata1.00: cmd 61/00:d8:08:1a:d0/04:00:06:00:00/40 tag 27
ncq 524288 out
[17655.017395] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017399] ata1.00: status: { DRDY }
[17655.017407] ata1.00: cmd 61/00:e0:08:1e:d0/04:00:06:00:00/40 tag 28
ncq 524288 out
[17655.017409] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017413] ata1.00: status: { DRDY }
[17655.017421] ata1.00: cmd 61/00:e8:08:22:d0/04:00:06:00:00/40 tag 29
ncq 524288 out
[17655.017423] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017427] ata1.00: status: { DRDY }
[17655.017435] ata1.00: cmd 61/00:f0:08:26:d0/04:00:06:00:00/40 tag 30
ncq 524288 out
[17655.017437] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17655.017441] ata1.00: status: { DRDY }
[17655.017447] ata1: hard resetting link
[17655.545918] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17655.548193] ata1.00: configured for UDMA/133
[17655.548204] ata1.00: device reported invalid CHS sector 0
[17655.548211] ata1.00: device reported invalid CHS sector 0
[17655.548399] ata1.00: device reported invalid CHS sector 0
[17655.548425] ata1.00: device reported invalid CHS sector 0
[17655.548429] ata1.00: device reported invalid CHS sector 0
[17655.548432] ata1.00: device reported invalid CHS sector 0
[17655.548438] ata1.00: device reported invalid CHS sector 0
[17655.548445] ata1.00: device reported invalid CHS sector 0
[17655.548450] ata1.00: device reported invalid CHS sector 0
[17655.548453] ata1.00: device reported invalid CHS sector 0
[17655.548456] ata1.00: device reported invalid CHS sector 0
[17655.548459] ata1.00: device reported invalid CHS sector 0
[17655.548462] ata1.00: device reported invalid CHS sector 0
[17655.548466] ata1.00: device reported invalid CHS sector 0
[17655.548469] ata1.00: device reported invalid CHS sector 0
[17655.548472] ata1.00: device reported invalid CHS sector 0
[17655.548475] ata1.00: device reported invalid CHS sector 0
[17655.548482] ata1.00: device reported invalid CHS sector 0
[17655.548488] ata1.00: device reported invalid CHS sector 0
[17655.548494] ata1.00: device reported invalid CHS sector 0
[17655.548501] ata1.00: device reported invalid CHS sector 0
[17655.548507] ata1.00: device reported invalid CHS sector 0
[17655.548514] ata1.00: device reported invalid CHS sector 0
[17655.548519] ata1.00: device reported invalid CHS sector 0
[17655.548526] ata1.00: device reported invalid CHS sector 0
[17655.548532] ata1.00: device reported invalid CHS sector 0
[17655.548537] ata1.00: device reported invalid CHS sector 0
[17655.548542] ata1.00: device reported invalid CHS sector 0
[17655.548548] ata1.00: device reported invalid CHS sector 0
[17655.548555] ata1.00: device reported invalid CHS sector 0
[17655.548561] ata1.00: device reported invalid CHS sector 0
[17655.548596] ata1: EH complete
[17686.024647] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0
action 0x6 frozen
[17686.024660] ata1.00: cmd 61/00:00:08:26:d0/04:00:06:00:00/40 tag 0
ncq 524288 out
[17686.024662] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask
0x4 (timeout)
[17686.024667] ata1.00: status: { DRDY }
[17686.024675] ata1.00: cmd 61/00:08:08:22:d0/04:00:06:00:00/40 tag 1
ncq 524288 out
[17686.024677] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024682] ata1.00: status: { DRDY }
[17686.024690] ata1.00: cmd 61/00:10:08:1e:d0/04:00:06:00:00/40 tag 2
ncq 524288 out
[17686.024692] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024696] ata1.00: status: { DRDY }
[17686.024704] ata1.00: cmd 61/00:18:08:1a:d0/04:00:06:00:00/40 tag 3
ncq 524288 out
[17686.024706] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024710] ata1.00: status: { DRDY }
[17686.024718] ata1.00: cmd 61/48:20:38:09:ca/01:00:06:00:00/40 tag 4
ncq 167936 out
[17686.024720] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024724] ata1.00: status: { DRDY }
[17686.024732] ata1.00: cmd 61/00:28:38:05:ca/04:00:06:00:00/40 tag 5
ncq 524288 out
[17686.024734] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024738] ata1.00: status: { DRDY }
[17686.024746] ata1.00: cmd 61/00:30:38:01:ca/04:00:06:00:00/40 tag 6
ncq 524288 out
[17686.024748] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024752] ata1.00: status: { DRDY }
[17686.024760] ata1.00: cmd 61/60:38:d0:7e:c9/02:00:06:00:00/40 tag 7
ncq 311296 out
[17686.024762] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024766] ata1.00: status: { DRDY }
[17686.024774] ata1.00: cmd 61/00:40:d0:7a:c9/04:00:06:00:00/40 tag 8
ncq 524288 out
[17686.024776] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024780] ata1.00: status: { DRDY }
[17686.024788] ata1.00: cmd 61/00:48:d0:76:c9/04:00:06:00:00/40 tag 9
ncq 524288 out
[17686.024790] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024794] ata1.00: status: { DRDY }
[17686.024802] ata1.00: cmd 61/00:50:d0:72:c9/04:00:06:00:00/40 tag 10
ncq 524288 out
[17686.024804] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024808] ata1.00: status: { DRDY }
[17686.024816] ata1.00: cmd 61/00:58:d0:6e:c9/04:00:06:00:00/40 tag 11
ncq 524288 out
[17686.024818] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024822] ata1.00: status: { DRDY }
[17686.024830] ata1.00: cmd 61/00:60:d0:6a:c9/04:00:06:00:00/40 tag 12
ncq 524288 out
[17686.024832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024836] ata1.00: status: { DRDY }
[17686.024844] ata1.00: cmd 61/00:68:d0:66:c9/04:00:06:00:00/40 tag 13
ncq 524288 out
[17686.024846] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024850] ata1.00: status: { DRDY }
[17686.024858] ata1.00: cmd 61/08:70:20:fd:bb/00:00:06:00:00/40 tag 14
ncq 4096 out
[17686.024860] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024864] ata1.00: status: { DRDY }
[17686.024872] ata1.00: cmd 61/08:78:60:fc:bb/00:00:06:00:00/40 tag 15
ncq 4096 out
[17686.024874] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024878] ata1.00: status: { DRDY }
[17686.024885] ata1.00: cmd 61/08:80:a8:e8:bb/00:00:06:00:00/40 tag 16
ncq 4096 out
[17686.024887] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024891] ata1.00: status: { DRDY }
[17686.024899] ata1.00: cmd 61/10:88:68:e6:bb/00:00:06:00:00/40 tag 17
ncq 8192 out
[17686.024901] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024905] ata1.00: status: { DRDY }
[17686.024913] ata1.00: cmd 61/10:90:a8:e5:bb/00:00:06:00:00/40 tag 18
ncq 8192 out
[17686.024915] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024919] ata1.00: status: { DRDY }
[17686.024927] ata1.00: cmd 60/08:98:00:3f:bc/00:00:06:00:00/40 tag 19
ncq 4096 in
[17686.024929] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024933] ata1.00: status: { DRDY }
[17686.024941] ata1.00: cmd 60/08:a0:50:01:c5/00:00:06:00:00/40 tag 20
ncq 4096 in
[17686.024943] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024947] ata1.00: status: { DRDY }
[17686.024955] ata1.00: cmd 61/08:a8:00:1a:d0/00:00:06:00:00/40 tag 21
ncq 4096 out
[17686.024957] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024961] ata1.00: status: { DRDY }
[17686.024969] ata1.00: cmd 61/00:b0:00:16:d0/04:00:06:00:00/40 tag 22
ncq 524288 out
[17686.024971] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024975] ata1.00: status: { DRDY }
[17686.024983] ata1.00: cmd 61/00:b8:00:12:d0/04:00:06:00:00/40 tag 23
ncq 524288 out
[17686.024985] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.024989] ata1.00: status: { DRDY }
[17686.024997] ata1.00: cmd 61/00:c0:00:0e:d0/04:00:06:00:00/40 tag 24
ncq 524288 out
[17686.024999] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025003] ata1.00: status: { DRDY }
[17686.025011] ata1.00: cmd 61/08:c8:f8:7e:17/00:00:03:00:00/40 tag 25
ncq 4096 out
[17686.025013] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025017] ata1.00: status: { DRDY }
[17686.025025] ata1.00: cmd 61/08:d0:b0:83:49/00:00:09:00:00/40 tag 26
ncq 4096 out
[17686.025027] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025031] ata1.00: status: { DRDY }
[17686.025039] ata1.00: cmd 61/c8:d8:38:0d:d0/00:00:06:00:00/40 tag 27
ncq 102400 out
[17686.025041] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025045] ata1.00: status: { DRDY }
[17686.025053] ata1.00: cmd 61/00:e0:38:09:d0/04:00:06:00:00/40 tag 28
ncq 524288 out
[17686.025055] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025059] ata1.00: status: { DRDY }
[17686.025066] ata1.00: cmd 61/00:e8:38:05:d0/04:00:06:00:00/40 tag 29
ncq 524288 out
[17686.025068] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025073] ata1.00: status: { DRDY }
[17686.025080] ata1.00: cmd 61/00:f0:38:01:d0/04:00:06:00:00/40 tag 30
ncq 524288 out
[17686.025082] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17686.025086] ata1.00: status: { DRDY }
[17686.025091] ata1: hard resetting link
[17686.553697] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17686.555939] ata1.00: configured for UDMA/133
[17686.555949] ata1.00: device reported invalid CHS sector 0
[17686.555957] ata1.00: device reported invalid CHS sector 0
[17686.555964] ata1.00: device reported invalid CHS sector 0
[17686.555969] ata1.00: device reported invalid CHS sector 0
[17686.555973] ata1.00: device reported invalid CHS sector 0
[17686.555980] ata1.00: device reported invalid CHS sector 0
[17686.555987] ata1.00: device reported invalid CHS sector 0
[17686.555992] ata1.00: device reported invalid CHS sector 0
[17686.555999] ata1.00: device reported invalid CHS sector 0
[17686.556005] ata1.00: device reported invalid CHS sector 0
[17686.556028] ata1.00: device reported invalid CHS sector 0
[17686.556034] ata1.00: device reported invalid CHS sector 0
[17686.556041] ata1.00: device reported invalid CHS sector 0
[17686.556048] ata1.00: device reported invalid CHS sector 0
[17686.556051] ata1.00: device reported invalid CHS sector 0
[17686.556054] ata1.00: device reported invalid CHS sector 0
[17686.556057] ata1.00: device reported invalid CHS sector 0
[17686.556060] ata1.00: device reported invalid CHS sector 0
[17686.556063] ata1.00: device reported invalid CHS sector 0
[17686.556066] ata1.00: device reported invalid CHS sector 0
[17686.556069] ata1.00: device reported invalid CHS sector 0
[17686.556073] ata1.00: device reported invalid CHS sector 0
[17686.556078] ata1.00: device reported invalid CHS sector 0
[17686.556084] ata1.00: device reported invalid CHS sector 0
[17686.556090] ata1.00: device reported invalid CHS sector 0
[17686.556093] ata1.00: device reported invalid CHS sector 0
[17686.556097] ata1.00: device reported invalid CHS sector 0
[17686.556101] ata1.00: device reported invalid CHS sector 0
[17686.556107] ata1.00: device reported invalid CHS sector 0
[17686.556114] ata1.00: device reported invalid CHS sector 0
[17686.556120] ata1.00: device reported invalid CHS sector 0
[17686.556154] ata1: EH complete
[17716.972998] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0
action 0x6 frozen
[17716.973011] ata1.00: cmd 61/00:00:38:01:d0/04:00:06:00:00/40 tag 0
ncq 524288 out
[17716.973014] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask
0x4 (timeout)
[17716.973018] ata1.00: status: { DRDY }
[17716.973027] ata1.00: cmd 61/00:08:38:05:d0/04:00:06:00:00/40 tag 1
ncq 524288 out
[17716.973029] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973033] ata1.00: status: { DRDY }
[17716.973041] ata1.00: cmd 61/00:10:38:09:d0/04:00:06:00:00/40 tag 2
ncq 524288 out
[17716.973043] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973047] ata1.00: status: { DRDY }
[17716.973055] ata1.00: cmd 61/c8:18:38:0d:d0/00:00:06:00:00/40 tag 3
ncq 102400 out
[17716.973057] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973061] ata1.00: status: { DRDY }
[17716.973069] ata1.00: cmd 61/08:20:b0:83:49/00:00:09:00:00/40 tag 4
ncq 4096 out
[17716.973071] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973075] ata1.00: status: { DRDY }
[17716.973083] ata1.00: cmd 61/08:28:f8:7e:17/00:00:03:00:00/40 tag 5
ncq 4096 out
[17716.973085] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973089] ata1.00: status: { DRDY }
[17716.973097] ata1.00: cmd 61/00:30:00:0e:d0/04:00:06:00:00/40 tag 6
ncq 524288 out
[17716.973099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973103] ata1.00: status: { DRDY }
[17716.973111] ata1.00: cmd 61/00:38:00:12:d0/04:00:06:00:00/40 tag 7
ncq 524288 out
[17716.973113] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973117] ata1.00: status: { DRDY }
[17716.973125] ata1.00: cmd 61/00:40:00:16:d0/04:00:06:00:00/40 tag 8
ncq 524288 out
[17716.973127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973131] ata1.00: status: { DRDY }
[17716.973139] ata1.00: cmd 61/08:48:00:1a:d0/00:00:06:00:00/40 tag 9
ncq 4096 out
[17716.973141] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973145] ata1.00: status: { DRDY }
[17716.973153] ata1.00: cmd 60/08:50:50:01:c5/00:00:06:00:00/40 tag 10
ncq 4096 in
[17716.973155] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973159] ata1.00: status: { DRDY }
[17716.973167] ata1.00: cmd 60/08:58:00:3f:bc/00:00:06:00:00/40 tag 11
ncq 4096 in
[17716.973169] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973173] ata1.00: status: { DRDY }
[17716.973181] ata1.00: cmd 61/10:60:a8:e5:bb/00:00:06:00:00/40 tag 12
ncq 8192 out
[17716.973183] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973187] ata1.00: status: { DRDY }
[17716.973195] ata1.00: cmd 61/10:68:68:e6:bb/00:00:06:00:00/40 tag 13
ncq 8192 out
[17716.973197] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973201] ata1.00: status: { DRDY }
[17716.973209] ata1.00: cmd 61/08:70:a8:e8:bb/00:00:06:00:00/40 tag 14
ncq 4096 out
[17716.973211] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973215] ata1.00: status: { DRDY }
[17716.973223] ata1.00: cmd 61/08:78:60:fc:bb/00:00:06:00:00/40 tag 15
ncq 4096 out
[17716.973225] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973229] ata1.00: status: { DRDY }
[17716.973237] ata1.00: cmd 61/08:80:20:fd:bb/00:00:06:00:00/40 tag 16
ncq 4096 out
[17716.973239] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973243] ata1.00: status: { DRDY }
[17716.973251] ata1.00: cmd 61/00:88:d0:66:c9/04:00:06:00:00/40 tag 17
ncq 524288 out
[17716.973253] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973257] ata1.00: status: { DRDY }
[17716.973265] ata1.00: cmd 61/00:90:d0:6a:c9/04:00:06:00:00/40 tag 18
ncq 524288 out
[17716.973267] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973271] ata1.00: status: { DRDY }
[17716.973279] ata1.00: cmd 61/00:98:d0:6e:c9/04:00:06:00:00/40 tag 19
ncq 524288 out
[17716.973281] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973285] ata1.00: status: { DRDY }
[17716.973293] ata1.00: cmd 61/00:a0:d0:72:c9/04:00:06:00:00/40 tag 20
ncq 524288 out
[17716.973295] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973299] ata1.00: status: { DRDY }
[17716.973307] ata1.00: cmd 61/00:a8:d0:76:c9/04:00:06:00:00/40 tag 21
ncq 524288 out
[17716.973309] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973313] ata1.00: status: { DRDY }
[17716.973321] ata1.00: cmd 61/00:b0:d0:7a:c9/04:00:06:00:00/40 tag 22
ncq 524288 out
[17716.973323] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973327] ata1.00: status: { DRDY }
[17716.973335] ata1.00: cmd 61/60:b8:d0:7e:c9/02:00:06:00:00/40 tag 23
ncq 311296 out
[17716.973337] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973341] ata1.00: status: { DRDY }
[17716.973349] ata1.00: cmd 61/00:c0:38:01:ca/04:00:06:00:00/40 tag 24
ncq 524288 out
[17716.973351] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973355] ata1.00: status: { DRDY }
[17716.973363] ata1.00: cmd 61/00:c8:38:05:ca/04:00:06:00:00/40 tag 25
ncq 524288 out
[17716.973365] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973369] ata1.00: status: { DRDY }
[17716.973377] ata1.00: cmd 61/48:d0:38:09:ca/01:00:06:00:00/40 tag 26
ncq 167936 out
[17716.973379] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973383] ata1.00: status: { DRDY }
[17716.973391] ata1.00: cmd 61/00:d8:08:1a:d0/04:00:06:00:00/40 tag 27
ncq 524288 out
[17716.973393] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973397] ata1.00: status: { DRDY }
[17716.973405] ata1.00: cmd 61/00:e0:08:1e:d0/04:00:06:00:00/40 tag 28
ncq 524288 out
[17716.973407] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973411] ata1.00: status: { DRDY }
[17716.973419] ata1.00: cmd 61/00:e8:08:22:d0/04:00:06:00:00/40 tag 29
ncq 524288 out
[17716.973421] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973425] ata1.00: status: { DRDY }
[17716.973433] ata1.00: cmd 61/00:f0:08:26:d0/04:00:06:00:00/40 tag 30
ncq 524288 out
[17716.973435] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17716.973439] ata1.00: status: { DRDY }
[17716.973444] ata1: hard resetting link
[17717.491499] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17717.493700] ata1.00: configured for UDMA/133
[17717.493710] ata1.00: device reported invalid CHS sector 0
[17717.493718] ata1.00: device reported invalid CHS sector 0
[17717.493725] ata1.00: device reported invalid CHS sector 0
[17717.493729] ata1.00: device reported invalid CHS sector 0
[17717.493732] ata1.00: device reported invalid CHS sector 0
[17717.493735] ata1.00: device reported invalid CHS sector 0
[17717.493742] ata1.00: device reported invalid CHS sector 0
[17717.493748] ata1.00: device reported invalid CHS sector 0
[17717.493753] ata1.00: device reported invalid CHS sector 0
[17717.493756] ata1.00: device reported invalid CHS sector 0
[17717.493759] ata1.00: device reported invalid CHS sector 0
[17717.493762] ata1.00: device reported invalid CHS sector 0
[17717.493766] ata1.00: device reported invalid CHS sector 0
[17717.493769] ata1.00: device reported invalid CHS sector 0
[17717.493772] ata1.00: device reported invalid CHS sector 0
[17717.493775] ata1.00: device reported invalid CHS sector 0
[17717.493778] ata1.00: device reported invalid CHS sector 0
[17717.493785] ata1.00: device reported invalid CHS sector 0
[17717.493791] ata1.00: device reported invalid CHS sector 0
[17717.493798] ata1.00: device reported invalid CHS sector 0
[17717.493805] ata1.00: device reported invalid CHS sector 0
[17717.493811] ata1.00: device reported invalid CHS sector 0
[17717.493818] ata1.00: device reported invalid CHS sector 0
[17717.493822] ata1.00: device reported invalid CHS sector 0
[17717.493830] ata1.00: device reported invalid CHS sector 0
[17717.493836] ata1.00: device reported invalid CHS sector 0
[17717.493840] ata1.00: device reported invalid CHS sector 0
[17717.493845] ata1.00: device reported invalid CHS sector 0
[17717.493852] ata1.00: device reported invalid CHS sector 0
[17717.493859] ata1.00: device reported invalid CHS sector 0
[17717.493883] ata1.00: device reported invalid CHS sector 0
[17717.493917] ata1: EH complete
[17747.920969] ata1.00: NCQ disabled due to excessive errors
[17747.920976] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0
action 0x6 frozen
[17747.920988] ata1.00: cmd 61/00:00:08:26:d0/04:00:06:00:00/40 tag 0
ncq 524288 out
[17747.920990] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask
0x4 (timeout)
[17747.920995] ata1.00: status: { DRDY }
[17747.921003] ata1.00: cmd 61/00:08:08:22:d0/04:00:06:00:00/40 tag 1
ncq 524288 out
[17747.921005] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921009] ata1.00: status: { DRDY }
[17747.921017] ata1.00: cmd 61/00:10:08:1e:d0/04:00:06:00:00/40 tag 2
ncq 524288 out
[17747.921019] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921023] ata1.00: status: { DRDY }
[17747.921031] ata1.00: cmd 61/00:18:08:1a:d0/04:00:06:00:00/40 tag 3
ncq 524288 out
[17747.921033] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921037] ata1.00: status: { DRDY }
[17747.921045] ata1.00: cmd 61/48:20:38:09:ca/01:00:06:00:00/40 tag 4
ncq 167936 out
[17747.921047] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921051] ata1.00: status: { DRDY }
[17747.921059] ata1.00: cmd 61/00:28:38:05:ca/04:00:06:00:00/40 tag 5
ncq 524288 out
[17747.921061] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921065] ata1.00: status: { DRDY }
[17747.921073] ata1.00: cmd 61/00:30:38:01:ca/04:00:06:00:00/40 tag 6
ncq 524288 out
[17747.921075] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921079] ata1.00: status: { DRDY }
[17747.921087] ata1.00: cmd 61/60:38:d0:7e:c9/02:00:06:00:00/40 tag 7
ncq 311296 out
[17747.921089] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921093] ata1.00: status: { DRDY }
[17747.921100] ata1.00: cmd 61/00:40:d0:7a:c9/04:00:06:00:00/40 tag 8
ncq 524288 out
[17747.921102] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921106] ata1.00: status: { DRDY }
[17747.921114] ata1.00: cmd 61/00:48:d0:76:c9/04:00:06:00:00/40 tag 9
ncq 524288 out
[17747.921116] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921120] ata1.00: status: { DRDY }
[17747.921128] ata1.00: cmd 61/00:50:d0:72:c9/04:00:06:00:00/40 tag 10
ncq 524288 out
[17747.921130] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921134] ata1.00: status: { DRDY }
[17747.921142] ata1.00: cmd 61/00:58:d0:6e:c9/04:00:06:00:00/40 tag 11
ncq 524288 out
[17747.921144] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921148] ata1.00: status: { DRDY }
[17747.921156] ata1.00: cmd 61/00:60:d0:6a:c9/04:00:06:00:00/40 tag 12
ncq 524288 out
[17747.921158] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921162] ata1.00: status: { DRDY }
[17747.921170] ata1.00: cmd 61/00:68:d0:66:c9/04:00:06:00:00/40 tag 13
ncq 524288 out
[17747.921172] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921176] ata1.00: status: { DRDY }
[17747.921184] ata1.00: cmd 61/08:70:20:fd:bb/00:00:06:00:00/40 tag 14
ncq 4096 out
[17747.921186] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921190] ata1.00: status: { DRDY }
[17747.921198] ata1.00: cmd 61/08:78:60:fc:bb/00:00:06:00:00/40 tag 15
ncq 4096 out
[17747.921200] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921204] ata1.00: status: { DRDY }
[17747.921212] ata1.00: cmd 61/08:80:a8:e8:bb/00:00:06:00:00/40 tag 16
ncq 4096 out
[17747.921214] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921218] ata1.00: status: { DRDY }
[17747.921226] ata1.00: cmd 61/10:88:68:e6:bb/00:00:06:00:00/40 tag 17
ncq 8192 out
[17747.921228] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921232] ata1.00: status: { DRDY }
[17747.921240] ata1.00: cmd 61/10:90:a8:e5:bb/00:00:06:00:00/40 tag 18
ncq 8192 out
[17747.921242] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921246] ata1.00: status: { DRDY }
[17747.921254] ata1.00: cmd 60/08:98:00:3f:bc/00:00:06:00:00/40 tag 19
ncq 4096 in
[17747.921256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921260] ata1.00: status: { DRDY }
[17747.921267] ata1.00: cmd 60/08:a0:50:01:c5/00:00:06:00:00/40 tag 20
ncq 4096 in
[17747.921269] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921273] ata1.00: status: { DRDY }
[17747.921281] ata1.00: cmd 61/08:a8:00:1a:d0/00:00:06:00:00/40 tag 21
ncq 4096 out
[17747.921283] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921287] ata1.00: status: { DRDY }
[17747.921295] ata1.00: cmd 61/00:b0:00:16:d0/04:00:06:00:00/40 tag 22
ncq 524288 out
[17747.921297] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921301] ata1.00: status: { DRDY }
[17747.921309] ata1.00: cmd 61/00:b8:00:12:d0/04:00:06:00:00/40 tag 23
ncq 524288 out
[17747.921311] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921315] ata1.00: status: { DRDY }
[17747.921323] ata1.00: cmd 61/00:c0:00:0e:d0/04:00:06:00:00/40 tag 24
ncq 524288 out
[17747.921325] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921329] ata1.00: status: { DRDY }
[17747.921337] ata1.00: cmd 61/08:c8:f8:7e:17/00:00:03:00:00/40 tag 25
ncq 4096 out
[17747.921339] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921343] ata1.00: status: { DRDY }
[17747.921351] ata1.00: cmd 61/08:d0:b0:83:49/00:00:09:00:00/40 tag 26
ncq 4096 out
[17747.921353] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921357] ata1.00: status: { DRDY }
[17747.921364] ata1.00: cmd 61/c8:d8:38:0d:d0/00:00:06:00:00/40 tag 27
ncq 102400 out
[17747.921366] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921370] ata1.00: status: { DRDY }
[17747.921378] ata1.00: cmd 61/00:e0:38:09:d0/04:00:06:00:00/40 tag 28
ncq 524288 out
[17747.921380] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921384] ata1.00: status: { DRDY }
[17747.921392] ata1.00: cmd 61/00:e8:38:05:d0/04:00:06:00:00/40 tag 29
ncq 524288 out
[17747.921394] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921398] ata1.00: status: { DRDY }
[17747.921406] ata1.00: cmd 61/00:f0:38:01:d0/04:00:06:00:00/40 tag 30
ncq 524288 out
[17747.921408] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17747.921412] ata1.00: status: { DRDY }
[17747.921417] ata1: hard resetting link
[17748.449291] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17748.451363] ata1.00: configured for UDMA/133
[17748.451373] ata1.00: device reported invalid CHS sector 0
[17748.451381] ata1.00: device reported invalid CHS sector 0
[17748.451387] ata1.00: device reported invalid CHS sector 0
[17748.451393] ata1.00: device reported invalid CHS sector 0
[17748.451397] ata1.00: device reported invalid CHS sector 0
[17748.451404] ata1.00: device reported invalid CHS sector 0
[17748.451410] ata1.00: device reported invalid CHS sector 0
[17748.451415] ata1.00: device reported invalid CHS sector 0
[17748.451422] ata1.00: device reported invalid CHS sector 0
[17748.451429] ata1.00: device reported invalid CHS sector 0
[17748.451435] ata1.00: device reported invalid CHS sector 0
[17748.451442] ata1.00: device reported invalid CHS sector 0
[17748.451448] ata1.00: device reported invalid CHS sector 0
[17748.451455] ata1.00: device reported invalid CHS sector 0
[17748.451458] ata1.00: device reported invalid CHS sector 0
[17748.451461] ata1.00: device reported invalid CHS sector 0
[17748.451464] ata1.00: device reported invalid CHS sector 0
[17748.451467] ata1.00: device reported invalid CHS sector 0
[17748.451470] ata1.00: device reported invalid CHS sector 0
[17748.451473] ata1.00: device reported invalid CHS sector 0
[17748.451477] ata1.00: device reported invalid CHS sector 0
[17748.451480] ata1.00: device reported invalid CHS sector 0
[17748.451485] ata1.00: device reported invalid CHS sector 0
[17748.451491] ata1.00: device reported invalid CHS sector 0
[17748.451497] ata1.00: device reported invalid CHS sector 0
[17748.451500] ata1.00: device reported invalid CHS sector 0
[17748.451503] ata1.00: device reported invalid CHS sector 0
[17748.451507] ata1.00: device reported invalid CHS sector 0
[17748.451514] ata1.00: device reported invalid CHS sector 0
[17748.451520] ata1.00: device reported invalid CHS sector 0
[17748.451527] ata1.00: device reported invalid CHS sector 0
[17748.451560] ata1: EH complete
[18883.279801] CE: hpet increasing min_delta_ns to 15000 nsec
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists