[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100426210202.GW30801@buzzloop.caiaq.de>
Date: Mon, 26 Apr 2010 23:02:02 +0200
From: Daniel Mack <daniel@...aq.de>
To: Dinh.Nguyen@...escale.com
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux@....linux.org.uk, s.hauer@...gutronix.de,
valentin.longchamp@...l.ch, grant.likely@...retlab.ca,
bryan.wu@...onical.com, amit.kucheria@...onical.com,
Jun.Li@...escale.com, xiao-lizhang@...escale.com
Subject: Re: [PATCHv8 2.6.34-rc5 4/5] mxc: Add generic USB HW
initialization for MX51
On Thu, Apr 22, 2010 at 11:51:16PM -0500, Dinh.Nguyen@...escale.com wrote:
[...]
> diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
> index 4b9b836..7fc5f99 100644
> --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
> +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
> @@ -25,6 +25,18 @@
> #define MXC_EHCI_INTERNAL_PHY (1 << 7)
> #define MXC_EHCI_IPPUE_DOWN (1 << 8)
> #define MXC_EHCI_IPPUE_UP (1 << 9)
> +#define MXC_EHCI_WAKEUP_ENABLED (1 << 10)
> +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11)
> +
> +#define MXC_USBCTRL_OFFSET 0
> +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
> +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
> +
> +#define MX5_USBOTHER_REGS_OFFSET 0x800
> +
> +/* USB_PHY_CTRL_FUNC2*/
> +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
> +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
>
> struct mxc_usbh_platform_data {
> int (*init)(struct platform_device *pdev);
> @@ -35,7 +47,7 @@ struct mxc_usbh_platform_data {
> struct otg_transceiver *otg;
> };
>
> -int mxc_set_usbcontrol(int port, unsigned int flags);
> +int mxc_initialize_usb_hw(int port, unsigned int flags);
>
> #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
>
> diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
> index ead59f4..bb8d092 100644
> --- a/drivers/usb/host/ehci-mxc.c
> +++ b/drivers/usb/host/ehci-mxc.c
> @@ -191,6 +191,11 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
> clk_enable(priv->ahbclk);
> }
>
> + /* setup specific usb hw */
> + ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
> + if (ret < 0)
> + goto err_init;
> +
> /* set USBMODE to host mode */
> temp = readl(hcd->regs + USBMODE_OFFSET);
> writel(temp | USBMODE_CM_HOST, hcd->regs + USBMODE_OFFSET);
> @@ -199,11 +204,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
> writel(pdata->portsc, hcd->regs + PORTSC_OFFSET);
> mdelay(10);
>
> - /* setup USBCONTROL. */
> - ret = mxc_set_usbcontrol(pdev->id, pdata->flags);
> - if (ret < 0)
> - goto err_init;
> -
> /* Initialize the transceiver */
> if (pdata->otg) {
> pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
I think there's still one concern left for the move of this function
block, right? Dinh, is this actually necessary? Could you try calling
mxc_initialize_usb_hw() from the location where mxc_set_usbcontrol() was
used to be called? Or is there anything I overlook?
This might look like nit-picking to you, but as Sascha explained, there
is a certain risk of breaking functionality for existing boards, and if
we can avoid that, we should.
Meanwhile, I prepared a patch to clean up plat-mxc/ehci.c. I'll send it
out once this series is accepted.
Thanks,
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists