| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4BE55EE2.4000701@coyote.org>
Date: Sat, 08 May 2010 14:53:54 +0200
From: Lars Lindley <lindley@...ote.org>
To: Greg KH <greg@...ah.com>
CC: Pekka Enberg <penberg@...helsinki.fi>, greg KH <gregkh@...e.de>,
Pavel Machek <pavel@....cz>, devel@...verdev.osuosl.org,
kernel list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] staging: winbond: localpara.h whitespace and indentation
fixes.
On 2010-05-03 20:45, Greg KH wrote:
> On Sun, May 02, 2010 at 10:34:08AM +0200, Lars Lindley wrote:
>> On 2010-04-29 00:50, Greg KH wrote:
>>> On Fri, Mar 19, 2010 at 12:00:59AM +0100, Lars Lindley wrote:
>>>> On 2010-03-18 17:22, Pekka Enberg wrote:
>>>>> Lars Lindley wrote:
>>>>>> +/* refer Bitmap2RateValue table */
>>>>>> +#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 /*
>>>>>> + * the bitmap value
>>>>>> + * of all the H/W
>>>>>> + * supported rates:
>>>>>> + * 1, 2, 5.5, 11,
>>>>>> + * 6, 9, 12, 18,
>>>>>> + * 24, 36, 48, 54
>>>>>> + */
>>>>>
>>>>> The comments look funny. You might want to move them above the #defines.
>>>>>
>>>>>> + u8 region; /* real region setting of the device */
>>>>>> + u8 Reserved_1[2];
>>>>>> +
>>>>>> +/* power-save variables */
>>>>>
>>>>> I think this wants to be moved one indentation level to the right.
>>>>>
>>>> Ok here's a patch that applies over the old one to fix this..
>>>> Hope it looks all right.. :)
>>>
>>> Can you merge the two of them together and resend?
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>
>> I have somehow messed up my git tree so I can't get rebase to work but
>> here's the diff for localpara.h and that combines the two patches..
>> Hope it works for you Greg.
>
> Yes it did, but it lacked a change log entry showing what the patch did,
> as well as a signed-off-by: line allowing me to apply the patch :(
>
> Care to resend it again with that required information?
>
> thanks,
>
> greg k-h
>
Ok, sorry.
Here it comes.. :)
Regards
/Lars
[PATCH] staging: winbond: localpara.h whitespace and indentation fixes.
I fixed all problems found by checkpatch.pl except a number of long
lines that I didn't find a good way to break up and still keep it
readable. I added the () to #define MAX_IE_APPEND_SIZE (256 + 4).
I also moved som comments around after pointers from Pekka.
Signed-off-by: Lars Lindley <lindley@...ote.org>
Acked-by: Pekka Enberg <penberg@...helsinki.fi>
Acked-by: Pavel Machek <pavel@....cz>
diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h
index fcf6a04..d798057 100644
--- a/drivers/staging/winbond/localpara.h
+++ b/drivers/staging/winbond/localpara.h
@@ -1,263 +1,267 @@
#ifndef __WINBOND_LOCALPARA_H
#define __WINBOND_LOCALPARA_H
-//=============================================================
-// LocalPara.h -
-//=============================================================
+/*
+ * =============================================================
+ * LocalPara.h -
+ * =============================================================
+ */
#include "mac_structures.h"
-//Define the local ability
+/* Define the local ability */
-#define LOCAL_DEFAULT_BEACON_PERIOD 100 //ms
-#define LOCAL_DEFAULT_ATIM_WINDOW 0
-#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 //0x0001: ESS
- //0x0010: Privacy
- //0x0020: short preamble
- //0x0400: short slot time
-#define LOCAL_DEFAULT_LISTEN_INTERVAL 5
+#define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */
+#define LOCAL_DEFAULT_ATIM_WINDOW 0
+#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /*
+ * 0x0001: ESS
+ * 0x0010: Privacy
+ * 0x0020: short preamble
+ * 0x0400: short slot time
+ */
+#define LOCAL_DEFAULT_LISTEN_INTERVAL 5
-//#define LOCAL_DEFAULT_24_CHANNEL_NUM 11 // channel 1..11
-#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 // channel 1..13
-#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 // channel 36..64
+#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */
+#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */
-#define LOCAL_USA_24_CHANNEL_NUM 11
-#define LOCAL_USA_5_CHANNEL_NUM 12
-#define LOCAL_EUROPE_24_CHANNEL_NUM 13
-#define LOCAL_EUROPE_5_CHANNEL_NUM 19
-#define LOCAL_JAPAN_24_CHANNEL_NUM 14
-#define LOCAL_JAPAN_5_CHANNEL_NUM 11
-#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
-#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 //not include 165
+#define LOCAL_USA_24_CHANNEL_NUM 11
+#define LOCAL_USA_5_CHANNEL_NUM 12
+#define LOCAL_EUROPE_24_CHANNEL_NUM 13
+#define LOCAL_EUROPE_5_CHANNEL_NUM 19
+#define LOCAL_JAPAN_24_CHANNEL_NUM 14
+#define LOCAL_JAPAN_5_CHANNEL_NUM 11
+#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
+#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */
-
-#define psLOCAL (&(adapter->sLocalPara))
+#define psLOCAL (&(adapter->sLocalPara))
#define MODE_802_11_BG 0
#define MODE_802_11_A 1
#define MODE_802_11_ABG 2
#define MODE_802_11_BG_IBSS 3
#define MODE_802_11_B 4
-#define MODE_AUTO 255
+#define MODE_AUTO 255
#define BAND_TYPE_DSSS 0
#define BAND_TYPE_OFDM_24 1
#define BAND_TYPE_OFDM_5 2
-//refer Bitmap2RateValue table
-#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 //the bitmap value of all the H/W supported rates
- //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 //the bitmap value of all the H/W supported rates
- //except to non-OFDM rates
- //6, 9, 12, 18, 24, 36, 48, 54
-
-#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
-#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
-#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
-#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 //1, 2, 5.5, 11
-#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 //6, 9, 12, 18, 24, 36, 48, 54
-#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 //6, 12, 24
-#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 //9, 18, 36, 48, 54
-
-
-
-#define PWR_ACTIVE 0
-#define PWR_SAVE 1
+/* refer Bitmap2RateValue table */
+
+/* the bitmap value of all the H/W supported rates: */
+/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66
+/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */
+/* 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240
+#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
+#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
+#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
+#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */
+#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */
+#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */
+
+
+#define PWR_ACTIVE 0
+#define PWR_SAVE 1
#define PWR_TX_IDLE_CYCLE 6
-//bPreambleMode and bSlotTimeMode
-#define AUTO_MODE 0
-#define LONG_MODE 1
-
-//Region definition
-#define REGION_AUTO 0xff
-#define REGION_UNKNOWN 0
-#define REGION_EUROPE 1 //ETSI
-#define REGION_JAPAN 2 //MKK
-#define REGION_USA 3 //FCC
-#define REGION_FRANCE 4 //FRANCE
-#define REGION_SPAIN 5 //SPAIN
-#define REGION_ISRAEL 6 //ISRAEL
-//#define REGION_CANADA 7 //IC
+/* bPreambleMode and bSlotTimeMode */
+#define AUTO_MODE 0
+#define LONG_MODE 1
+
+/* Region definition */
+#define REGION_AUTO 0xff
+#define REGION_UNKNOWN 0
+#define REGION_EUROPE 1 /* ETSI */
+#define REGION_JAPAN 2 /* MKK */
+#define REGION_USA 3 /* FCC */
+#define REGION_FRANCE 4 /* FRANCE */
+#define REGION_SPAIN 5 /* SPAIN */
+#define REGION_ISRAEL 6 /* ISRAEL */
#define MAX_BSS_DESCRIPT_ELEMENT 32
-#define MAX_PMKID_CandidateList 16
-
-//High byte : Event number, low byte : reason
-//Event definition
-//-- SME/MLME event
-#define EVENT_RCV_DEAUTH 0x0100
-#define EVENT_JOIN_FAIL 0x0200
-#define EVENT_AUTH_FAIL 0x0300
-#define EVENT_ASSOC_FAIL 0x0400
-#define EVENT_LOST_SIGNAL 0x0500
-#define EVENT_BSS_DESCRIPT_LACK 0x0600
-#define EVENT_COUNTERMEASURE 0x0700
-#define EVENT_JOIN_FILTER 0x0800
-//-- TX/RX event
-#define EVENT_RX_BUFF_UNAVAILABLE 0x4100
-
-#define EVENT_CONNECT 0x8100
-#define EVENT_DISCONNECT 0x8200
-#define EVENT_SCAN_REQ 0x8300
-
-//Reason of Event
+#define MAX_PMKID_CandidateList 16
+
+/*
+ * High byte : Event number, low byte : reason
+ * Event definition
+ * -- SME/MLME event
+ */
+#define EVENT_RCV_DEAUTH 0x0100
+#define EVENT_JOIN_FAIL 0x0200
+#define EVENT_AUTH_FAIL 0x0300
+#define EVENT_ASSOC_FAIL 0x0400
+#define EVENT_LOST_SIGNAL 0x0500
+#define EVENT_BSS_DESCRIPT_LACK 0x0600
+#define EVENT_COUNTERMEASURE 0x0700
+#define EVENT_JOIN_FILTER 0x0800
+/* -- TX/RX event */
+#define EVENT_RX_BUFF_UNAVAILABLE 0x4100
+
+#define EVENT_CONNECT 0x8100
+#define EVENT_DISCONNECT 0x8200
+#define EVENT_SCAN_REQ 0x8300
+
+/* Reason of Event */
#define EVENT_REASON_FILTER_BASIC_RATE 0x0001
-#define EVENT_REASON_FILTER_PRIVACY 0x0002
+#define EVENT_REASON_FILTER_PRIVACY 0x0002
#define EVENT_REASON_FILTER_AUTH_MODE 0x0003
-#define EVENT_REASON_TIMEOUT 0x00ff
+#define EVENT_REASON_TIMEOUT 0x00ff
-// 20061108 WPS IE buffer
-#define MAX_IE_APPEND_SIZE 256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes
+/* Due to[E id][Length][OUI][Data] may be 257 bytes */
+#define MAX_IE_APPEND_SIZE (256 + 4)
-struct chan_info
-{
- u8 band;
- u8 ChanNo;
+struct chan_info {
+ u8 band;
+ u8 ChanNo;
};
-struct radio_off
-{
- u8 boHwRadioOff;
- u8 boSwRadioOff;
+struct radio_off {
+ u8 boHwRadioOff;
+ u8 boSwRadioOff;
};
-//===========================================================================
-struct wb_local_para
-{
- u8 PermanentAddress[ MAC_ADDR_LENGTH + 2 ]; // read from EPROM, manufacture set for each NetCard
- u8 ThisMacAddress[ MAC_ADDR_LENGTH + 2 ]; // the driver will use actually.
-
- u32 MTUsize; // Ind to Uplayer, Max transmission unit size
-
- u8 region_INF; //region setting from INF
- u8 region; //real region setting of the device
- u8 Reserved_1[2];
-
- //// power-save variables
- u8 iPowerSaveMode; // 0 indicates it is on, 1 indicates it is off
- u8 ATIMmode;
- u8 ExcludeUnencrypted;
-
- u16 CheckCountForPS; //Unit ime count for the decision to enter PS mode
- u8 boHasTxActivity; //tx activity has occurred
- u8 boMacPsValid; //Power save mode obtained from H/W is valid or not
-
- //// Rate
- u8 TxRateMode; // Initial, input from Registry, may be updated by GUI
- //Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
- u8 CurrentTxRate; // The current Tx rate
- u8 CurrentTxRateForMng; // The current Tx rate for management frames
- // It will be decided before connection succeeds.
- u8 CurrentTxFallbackRate;
-
- //for Rate handler
- u8 BRateSet[32]; //basic rate set
- u8 SRateSet[32]; //support rate set
-
- u8 NumOfBRate;
- u8 NumOfSRate;
- u8 NumOfDsssRateInSRate; //number of DSSS rates in supported rate set
- u8 reserved1;
-
- u32 dwBasicRateBitmap; //bit map of basic rates
- u32 dwSupportRateBitmap; //bit map of all support rates including
- //basic and operational rates
-
- ////For SME/MLME handler
- u16 wOldSTAindex; // valid when boHandover=TRUE, store old connected STA index
- u16 wConnectedSTAindex; // Index of peerly connected AP or IBSS in
- // the descriptionset.
- u16 Association_ID; // The Association ID in the (Re)Association
- // Response frame.
- u16 ListenInterval; // The listen interval when SME invoking MLME_
- // (Re)Associate_Request().
-
- struct radio_off RadioOffStatus;
- u8 Reserved0[2];
-
- u8 boMsRadioOff; // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID.
- u8 bAntennaNo; //which antenna
- u8 bConnectFlag; //the connect status flag for roaming task
-
- u8 RoamStatus;
- u8 reserved7[3];
-
- struct chan_info CurrentChan; //Current channel no. and channel band. It may be changed by scanning.
- u8 boHandover; // Roaming, Hnadover to other AP.
- u8 boCCAbusy;
-
- u16 CWMax; // It may not be the real value that H/W used
- u8 CWMin; // 255: set according to 802.11 spec.
- u8 reserved2;
-
- //11G:
- u8 bMacOperationMode; // operation in 802.11b or 802.11g
- u8 bSlotTimeMode; //AUTO, s32
- u8 bPreambleMode; //AUTO, s32
- u8 boNonERPpresent;
-
- u8 boProtectMechanism; // H/W will take the necessary action based on this variable
- u8 boShortPreamble; // H/W will take the necessary action based on this variable
- u8 boShortSlotTime; // H/W will take the necessary action based on this variable
- u8 reserved_3;
-
- u32 RSN_IE_Bitmap; //added by WS
- u32 RSN_OUI_Type; //added by WS
-
- //For the BSSID
- u8 HwBssid[MAC_ADDR_LENGTH + 2];
- u32 HwBssidValid;
-
- //For scan list
- u8 BssListCount; //Total count of valid descriptor indexes
- u8 boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed
- u8 NoOfJoinerInIbss;
- u8 reserved_4;
-
- u8 BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //Store the valid descriptor indexes obtained from scannings
- u8 JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //save the BssDescriptor index in this
- //IBSS. The index 0 is local descriptor
- //(psLOCAL->wConnectedSTAindex).
- //If CONNECTED : NoOfJoinerInIbss >=2
- // else : NoOfJoinerInIbss <=1
-
- //// General Statistics, count at Rx_handler or Tx_callback interrupt handler
- u64 GS_XMIT_OK; // Good Frames Transmitted
- u64 GS_RCV_OK; // Good Frames Received
- u32 GS_RCV_ERROR; // Frames received with crc error
- u32 GS_XMIT_ERROR; // Bad Frames Transmitted
- u32 GS_RCV_NO_BUFFER; // Receive Buffer underrun
- u32 GS_XMIT_ONE_COLLISION; // one collision
- u32 GS_XMIT_MORE_COLLISIONS;// more collisions
-
- //================================================================
- // Statistics (no matter whether it had done successfully) -wkchen
- //================================================================
- u32 _NumRxMSDU;
- u32 _NumTxMSDU;
- u32 _dot11WEPExcludedCount;
- u32 _dot11WEPUndecryptableCount;
- u32 _dot11FrameDuplicateCount;
-
- struct chan_info IbssChanSetting; // 2B. Start IBSS Channel setting by registry or WWU.
- u8 reserved_5[2]; //It may not be used after considering RF type,
- //region and modulation type.
-
- u8 reserved_6[2]; //two variables are for wep key error detection added by ws 02/02/04
-
- u32 bWepKeyError;
- u32 bToSelfPacketReceived;
- u32 WepKeyDetectTimerCount;
-
- u16 SignalLostTh;
- u16 SignalRoamTh;
-
- // 20061108 WPS IE Append
+struct wb_local_para {
+ /* read from EPROM, manufacture set for each NetCard */
+ u8 PermanentAddress[MAC_ADDR_LENGTH + 2];
+ /* the driver will use this one actually. */
+ u8 ThisMacAddress[MAC_ADDR_LENGTH + 2];
+ u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */
+ u8 region_INF; /* region setting from INF */
+ u8 region; /* real region setting of the device */
+ u8 Reserved_1[2];
+
+ /* power-save variables */
+ u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */
+ u8 ATIMmode;
+ u8 ExcludeUnencrypted;
+ /* Unit ime count for the decision to enter PS mode */
+ u16 CheckCountForPS;
+ u8 boHasTxActivity;/* tx activity has occurred */
+ u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
+
+ /* Rate */
+ u8 TxRateMode; /*
+ * Initial, input from Registry,
+ * may be updated by GUI
+ * Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
+ */
+ u8 CurrentTxRate; /* The current Tx rate */
+ u8 CurrentTxRateForMng; /*
+ * The current Tx rate for management
+ * frames. It will be decided before
+ * connection succeeds.
+ */
+ u8 CurrentTxFallbackRate;
+
+ /* for Rate handler */
+ u8 BRateSet[32]; /* basic rate set */
+ u8 SRateSet[32]; /* support rate set */
+
+ u8 NumOfBRate;
+ u8 NumOfSRate;
+ u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */
+ u8 reserved1;
+
+ u32 dwBasicRateBitmap; /* bit map of basic rates */
+
+ u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */
+
+
+ /* For SME/MLME handler */
+
+ u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */
+ u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */
+ u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */
+ u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */
+
+ struct radio_off RadioOffStatus;
+ u8 Reserved0[2];
+ u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */
+ u8 bAntennaNo; /* which antenna */
+ u8 bConnectFlag; /* the connect status flag for roaming task */
+
+ u8 RoamStatus;
+ u8 reserved7[3];
+
+ struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */
+ u8 boHandover; /* Roaming, Hnadover to other AP. */
+ u8 boCCAbusy;
+
+ u16 CWMax; /* It may not be the real value that H/W used */
+ u8 CWMin; /* 255: set according to 802.11 spec. */
+ u8 reserved2;
+
+ /* 11G: */
+ u8 bMacOperationMode; /* operation in 802.11b or 802.11g */
+ u8 bSlotTimeMode; /* AUTO, s32 */
+ u8 bPreambleMode; /* AUTO, s32 */
+ u8 boNonERPpresent;
+
+ u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */
+ u8 boShortPreamble; /* Same here */
+ u8 boShortSlotTime; /* Same here */
+ u8 reserved_3;
+
+ u32 RSN_IE_Bitmap;
+ u32 RSN_OUI_Type;
+
+ /* For the BSSID */
+ u8 HwBssid[MAC_ADDR_LENGTH + 2];
+ u32 HwBssidValid;
+
+ /* For scan list */
+ u8 BssListCount; /* Total count of valid descriptor indexes */
+ u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */
+ u8 NoOfJoinerInIbss;
+ u8 reserved_4;
+
+ /* Store the valid descriptor indexes obtained from scannings */
+ u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
+ /*
+ * Save the BssDescriptor index in this IBSS.
+ * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex).
+ * If CONNECTED : NoOfJoinerInIbss >= 2
+ * else : NoOfJoinerInIbss <= 1
+ */
+ u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
+
+ /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
+ u64 GS_XMIT_OK; /* Good Frames Transmitted */
+ u64 GS_RCV_OK; /* Good Frames Received */
+ u32 GS_RCV_ERROR; /* Frames received with crc error */
+ u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */
+ u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */
+ u32 GS_XMIT_ONE_COLLISION; /* one collision */
+ u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */
+
+ /*
+ * ================================================================
+ * Statistics (no matter whether it had done successfully) -wkchen
+ * ================================================================
+ */
+ u32 _NumRxMSDU;
+ u32 _NumTxMSDU;
+ u32 _dot11WEPExcludedCount;
+ u32 _dot11WEPUndecryptableCount;
+ u32 _dot11FrameDuplicateCount;
+
+ struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */
+ u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */
+
+ u8 reserved_6[2]; /* two variables are for wep key error detection */
+ u32 bWepKeyError;
+ u32 bToSelfPacketReceived;
+ u32 WepKeyDetectTimerCount;
+
+ u16 SignalLostTh;
+ u16 SignalRoamTh;
+
u8 IE_Append_data[MAX_IE_APPEND_SIZE];
u16 IE_Append_size;
u16 reserved_7;
-
};
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists