| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1273522021-14436-2-git-send-email-ulli.kroll@googlemail.com>
Date: Mon, 10 May 2010 22:06:58 +0200
From: Hans Ulli Kroll <ulli.kroll@...glemail.com>
To: paulius.zaleckas@...il.com
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux@....linux.org.uk, Imre Kaloz <kaloz@...nwrt.org>,
Hans Ulli Kroll <ulli.kroll@...glemail.com>
Subject: [PATCH 1/4] ARM: Gemini: add support for Wiligear WBD-111
From: Imre Kaloz <kaloz@...nwrt.org>
Signed-off-by: Hans Ulli Kroll <ulli.kroll@...glemail.com>
---
arch/arm/mach-gemini/Kconfig | 7 ++
arch/arm/mach-gemini/Makefile | 1 +
arch/arm/mach-gemini/board-wbd111.c | 143 +++++++++++++++++++++++++++++++++++
3 files changed, 151 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-gemini/board-wbd111.c
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 515b75c..4de67ce 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -9,6 +9,13 @@ config MACH_RUT100
Say Y here if you intend to run this kernel on a
Teltonika 3G Router RUT100.
+config MACH_WBD111
+ bool "Wiliboard WBD-111"
+ select GEMINI_MEM_SWAP
+ help
+ Say Y here if you intend to run this kernel on a
+ Wiliboard WBD-111.
+
endmenu
config GEMINI_MEM_SWAP
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 719505b..3997487 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -8,3 +8,4 @@ obj-y := irq.o mm.o time.o devices.o gpio.o
# Board-specific support
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
+obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
new file mode 100644
index 0000000..36538c1
--- /dev/null
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -0,0 +1,143 @@
+/*
+ * Support for Wiliboard WBD-111
+ *
+ * Copyright (C) 2009 Imre Kaloz <kaloz@...nwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd111_keys[] = {
+ {
+ .code = KEY_SETUP,
+ .gpio = 5,
+ .active_low = 1,
+ .desc = "reset",
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data wbd111_keys_data = {
+ .buttons = wbd111_keys,
+ .nbuttons = ARRAY_SIZE(wbd111_keys),
+};
+
+static struct platform_device wbd111_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd111_keys_data,
+ },
+};
+
+static struct gpio_led wbd111_leds[] = {
+ {
+ .name = "L3red",
+ .gpio = 1,
+ },
+ {
+ .name = "L4green",
+ .gpio = 2,
+ },
+ {
+ .name = "L4red",
+ .gpio = 3,
+ },
+ {
+ .name = "L3green",
+ .gpio = 5,
+ },
+};
+
+static struct gpio_led_platform_data wbd111_leds_data = {
+ .num_leds = ARRAY_SIZE(wbd111_leds),
+ .leds = wbd111_leds,
+};
+
+static struct platform_device wbd111_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wbd111_leds_data,
+ },
+};
+
+static struct sys_timer wbd111_timer = {
+ .init = gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd111_partitions[] = {
+ {
+ .name = "RedBoot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x100000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x6a0000,
+ } , {
+ .name = "VCTL",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "cfg",
+ .offset = 0x7d0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "FIS",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
+#else
+#define wbd111_partitions NULL
+#define wbd111_num_partitions 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd111_init(void)
+{
+ gemini_gpio_init();
+ platform_register_uart();
+ platform_register_pflash(SZ_8M, wbd111_partitions,
+ wbd111_num_partitions);
+ platform_device_register(&wbd111_leds_device);
+ platform_device_register(&wbd111_keys_device);
+}
+
+MACHINE_START(WBD111, "Wiliboard WBD-111")
+ .phys_io = 0x7fffc000,
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = gemini_map_io,
+ .init_irq = gemini_init_irq,
+ .timer = &wbd111_timer,
+ .init_machine = wbd111_init,
+MACHINE_END
--
1.7.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists