| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <2460ac80ee51e759c7d4d552112c2e816db7c83b.1274187425.git.m.nazarewicz@samsung.com>
Date: Wed, 19 May 2010 11:04:11 +0200
From: Michal Nazarewicz <m.nazarewicz@...sung.com>
To: linux-usb@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 7/8] USB: gadget: g_multi: more configurable
Added Kconfig options for each function used by g_multi so that
one can customize the gadget to a greater extend.
Note that it will be wise to change vendor and product ID when
customising the gadget.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/usb/gadget/Kconfig | 67 +++++++++++------
drivers/usb/gadget/multi.c | 166 +++++++++++++++++++------------------------
2 files changed, 116 insertions(+), 117 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 1a3270d..1309e46 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -861,43 +861,62 @@ config USB_G_NOKIA
config USB_G_MULTI
tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
- depends on BLOCK && NET
- select USB_G_MULTI_CDC if ! USB_G_MULTI_RNDIS
+ select USB_G_MULTI_ACM if !USB_G_MULTI_ANYTHING
help
- The Multifunction Composite Gadget provides Ethernet (RNDIS
- and/or CDC Ethernet), mass storage and ACM serial link
- interfaces.
-
- You will be asked to choose which of the two configurations is
- to be available in the gadget. At least one configuration must
- be chosen to make the gadget usable. Selecting more than one
- configuration will prevent Windows from automatically detecting
- the gadget as a composite gadget, so an INF file will be needed to
- use the gadget.
+ The Multifunction Composite Gadget provides several different
+ configurations and functions. Which interfaces are provided can
+ be configured at build time. If you choose this gadget additional
+ options will appear.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "g_multi".
-config USB_G_MULTI_RNDIS
- bool "RNDIS + CDC Serial + Storage configuration"
+config USB_G_MULTI_ANYTHING
+ bool
depends on USB_G_MULTI
+
+config USB_G_MULTI_RNDIS
+ bool "Include RNDIS function"
+ depends on USB_G_MULTI && NET
+ select USB_G_MULTI_ANYTHING
default y
help
- This option enables a configuration with RNDIS, CDC Serial and
- Mass Storage functions available in the Multifunction Composite
- Gadget. This is the configuration dedicated for Windows since RNDIS
- is Microsoft's protocol.
+ This option enables the RNDIS (Ethernet) function. It is
+ protocol dedicated for Windows since it's Microsoft's invention.
+
+ If you select also CDC ECM function gadget will have two
+ configurations one with RNDIS and another with CDC ECM.
+
+ If unsure, say "y".
+
+config USB_G_MULTI_ECM
+ bool "Include CDC ECM function"
+ depends on USB_G_MULTI && NET
+ select USB_G_MULTI_ANYTHING
+ help
+ This option enables the CDC ECM (Ethernet) function.
+
+ If you select also RNDIS function gadget will have two
+ configurations one with RNDIS and another with CDC ECM.
If unsure, say "y".
-config USB_G_MULTI_CDC
- bool "CDC Ethernet + CDC Serial + Storage configuration"
+config USB_G_MULTI_ACM
+ bool "Include CDC ACM function"
depends on USB_G_MULTI
- default n
+ default y
+ help
+ This option enables the CDC ACM (serial) function.
+
+ If unsure, say "y".
+
+config USB_G_MULTI_MSF
+ bool "Include mass storage function"
+ depends on USB_G_MULTI && BLOCK
+ select USB_G_MULTI_ANYTHING
+ default y
help
- This option enables a configuration with CDC Ethernet (ECM), CDC
- Serial and Mass Storage functions available in the Multifunction
- Composite Gadget.
+ This option enables the mass storage (or UMS) function.
If unsure, say "y".
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index cd7d1c1..454622e 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -57,19 +57,57 @@ MODULE_LICENSE("GPL");
#include "config.c"
#include "epautoconf.c"
-#include "f_mass_storage.c"
+/* Mass storage */
+#ifdef CONFIG_USB_G_MULTI_MSF
+# include "f_mass_storage.c"
-#include "u_serial.c"
-#include "f_acm.c"
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+#else
+# define fsg_common_from_params(common, cdev, data) NULL
+# define fsg_bind_config(cdev, conf, common) ((int)0)
+# define fsg_common_put(common) do { } while (0)
+#endif
-#include "f_ecm.c"
-#include "f_subset.c"
-#ifdef USB_ETH_RNDIS
+/* CDC ACM */
+#ifdef CONFIG_USB_G_MULTI_ACM
+# include "u_serial.c"
+# include "f_acm.c"
+#else
+# define gserial_setup(conf, ports) ((int)0)
+# define gserial_cleanup() do { } while (0)
+# define acm_bind_config(conf, ports) ((int)0)
+#endif
+
+/* Ethernet */
+#ifdef CONFIG_USB_G_MULTI_ECM
+# include "f_ecm.c"
+# include "f_subset.c"
+#endif
+
+#ifdef CONFIG_USB_G_MULTI_RNDIS
# include "f_rndis.c"
# include "rndis.c"
#endif
-#include "u_ether.c"
+#if defined CONFIG_USB_G_MULTI_ECM || defined CONFIG_USB_G_MULTI_RNDIS
+# include "u_ether.c"
+static u8 hostaddr[ETH_ALEN];
+#else
+# define gether_setup(cdev, hostaddr) ((int)0)
+# define gether_cleanup() do { } while (0)
+#endif
+
+#ifndef CONFIG_USB_G_MULTI_ECM
+# define can_support_ecm(gadget) true
+# define ecm_bind_config(conf, ethaddr) ((int)0)
+#endif
+
+#ifndef CONFIG_USB_G_MULTI_RNDIS
+# define rndis_bind_config(conf, ethaddr) ((int)0)
+#endif
/***************************** Device Descriptor ****************************/
@@ -78,19 +116,6 @@ MODULE_LICENSE("GPL");
#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */
-enum {
- __MULTI_NO_CONFIG,
-#ifdef CONFIG_USB_G_MULTI_RNDIS
- MULTI_RNDIS_CONFIG_NUM,
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
- MULTI_CDC_CONFIG_NUM,
-#endif
- __MULTI_NUM_CONFIGS_HELPER,
- MULTI_NUM_CONFIGS = __MULTI_NUM_CONFIGS_HELPER - 1
-};
-
-
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -104,7 +129,11 @@ static struct usb_device_descriptor device_desc = {
/* Vendor and product id can be overridden by module parameters. */
.idVendor = cpu_to_le16(MULTI_VENDOR_NUM),
.idProduct = cpu_to_le16(MULTI_PRODUCT_NUM),
- .bNumConfigurations = MULTI_NUM_CONFIGS,
+#if defined CONFIG_USB_G_MULTI_RNDIS && defined CONFIG_USB_G_MULTI_ECM
+ .bNumConfigurations = 2,
+#else
+ .bNumConfigurations = 1,
+#endif
};
@@ -124,12 +153,6 @@ static const struct usb_descriptor_header *otg_desc[] = {
enum {
MULTI_STRING_MANUFACTURER_IDX,
MULTI_STRING_PRODUCT_IDX,
-#ifdef CONFIG_USB_G_MULTI_RNDIS
- MULTI_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
- MULTI_STRING_CDC_CONFIG_IDX,
-#endif
};
static char manufacturer[50];
@@ -137,12 +160,6 @@ static char manufacturer[50];
static struct usb_string strings_dev[] = {
[MULTI_STRING_MANUFACTURER_IDX].s = manufacturer,
[MULTI_STRING_PRODUCT_IDX ].s = DRIVER_DESC,
-#ifdef CONFIG_USB_G_MULTI_RNDIS
- [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
- [MULTI_STRING_CDC_CONFIG_IDX ].s = "Multifunction with CDC ECM",
-#endif
{ } /* end of list */
};
@@ -159,19 +176,8 @@ static struct usb_gadget_strings *dev_strings[] = {
/****************************** Configurations ******************************/
-static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
-FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
-static struct fsg_common fsg_common;
-
-static u8 hostaddr[ETH_ALEN];
-
-
-/********** RNDIS **********/
-
-#ifdef USB_ETH_RNDIS
-
-static __ref int rndis_do_config(struct usb_configuration *c)
+static __ref int first_do_config(struct usb_configuration *c)
{
int ret;
@@ -180,7 +186,11 @@ static __ref int rndis_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
+#ifdef CONFIG_USB_G_MULTI_RNDIS
ret = rndis_bind_config(c, hostaddr);
+#else
+ ret = ecm_bind_config(c, hostaddr);
+#endif
if (ret < 0)
return ret;
@@ -195,35 +205,17 @@ static __ref int rndis_do_config(struct usb_configuration *c)
return 0;
}
-static int rndis_config_register(struct usb_composite_dev *cdev)
-{
- static struct usb_configuration config = {
- .bind = rndis_do_config,
- .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM,
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- };
-
- config.label = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
- config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
-
- return usb_add_config(cdev, &config);
-}
-
-#else
-
-static int rndis_config_register(struct usb_composite_dev *cdev)
-{
- return 0;
-}
-
-#endif
-
+static struct usb_configuration first_config_driver = {
+ .label = "First Configuration",
+ .bind = first_do_config,
+ .bConfigurationValue = 1,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+};
-/********** CDC ECM **********/
-#ifdef CONFIG_USB_G_MULTI_CDC
+#if defined CONFIG_USB_G_MULTI_RNDIS && defined CONFIG_USB_G_MULTI_ECM
-static __ref int cdc_do_config(struct usb_configuration *c)
+static __ref int second_do_config(struct usb_configuration *c)
{
int ret;
@@ -247,26 +239,12 @@ static __ref int cdc_do_config(struct usb_configuration *c)
return 0;
}
-static int cdc_config_register(struct usb_composite_dev *cdev)
-{
- static struct usb_configuration config = {
- .bind = cdc_do_config,
- .bConfigurationValue = MULTI_CDC_CONFIG_NUM,
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- };
-
- config.label = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
- config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
-
- return usb_add_config(cdev, &config);
-}
-
-#else
-
-static int cdc_config_register(struct usb_composite_dev *cdev)
-{
- return 0;
-}
+static struct usb_configuration second_config_driver = {
+ .label = "Second Configuration",
+ .bind = second_do_config,
+ .bConfigurationValue = 2,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+};
#endif
@@ -331,13 +309,15 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
strings_dev[MULTI_STRING_PRODUCT_IDX].id;
/* register configurations */
- status = rndis_config_register(cdev);
+ status = usb_add_config(cdev, &first_config_driver);
if (unlikely(status < 0))
goto fail2;
- status = cdc_config_register(cdev);
+#if defined CONFIG_USB_G_MULTI_RNDIS && defined CONFIG_USB_G_MULTI_ECM
+ status = usb_add_config(cdev, &second_config_driver);
if (unlikely(status < 0))
goto fail2;
+#endif
/* we're done */
dev_info(&gadget->dev, DRIVER_DESC "\n");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists