| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3495EC08FA53E94AAA00CC4743D5BA7E010C20EF@pandora.diasemi.com>
Date: Wed, 19 May 2010 10:28:22 +0100
From: "David Dajun Chen" <Dajun.Chen@...semi.com>
To: <linux-kernel@...r.kernel.org>
Cc: "Michael Buesch" <mb@...sch.de>
Subject: [PATCH] GPIO of DA9052 Linux device drivers (2/9)
Dear sir/madam,
The attached is the GPIO part of the device drivers newly developed for DA9052 Power Management IC from Dialog Semiconductor.
Regards
Dr. David Dajun Chen
Dialog Semiconductor Ltd.
Delta 200, Welton Road
Delta Business Park
Swindon
Wiltshire SN5 7XB
UK
Telephone: (+44) 01793-757714
Mobile: (+44) 07917015477
Fax: (+44) 01793-758000
============================================================================
diff -Naur linux-2.6.33.2_bk/drivers/gpio/da9052_gpio.c linux-2.6.33.2_patch/drivers/gpio/da9052_gpio.c
--- linux-2.6.33.2_bk/drivers/gpio/da9052_gpio.c 1970-01-01 05:00:00.000000000 +0500
+++ linux-2.6.33.2_patch/drivers/gpio/da9052_gpio.c 2010-05-18 18:09:37.000000000 +0500
@@ -0,0 +1,1460 @@
+/*
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * da9052_gpio.c : Driver for GPIO peripheral on DA9052 chip.
+ *
+ * History:
+ *
+ * (21/04/2009): Created first draft
+ *
+ * (27/04/2010): Created initial draft for Linux community release
+ * Best Viewed with TabSize=8 and ColumnWidth=80
+ */
+
+/*--------------------------------------------------------------------------*/
+/* System wide include files */
+/*--------------------------------------------------------------------------*/
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <linux/platform_device.h>
+
+#ifndef CONFIG_ARCH_S3C64XX
+#include <linux/syscalls.h>
+#endif
+
+/*--------------------------------------------------------------------------*/
+/* Module specific include files */
+/*--------------------------------------------------------------------------*/
+#include <linux/mfd/da9052/da9052_reg.h>
+#include <linux/mfd/da9052/da9052_lib.h>
+#include <linux/mfd/da9052/da9052_eh.h>
+#include <linux/mfd/da9052/da9052_gpio.h>
+
+/*--------------------------------------------------------------------------*/
+/* Local Type Definitions */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Local Constant Definitions */
+/*--------------------------------------------------------------------------*/
+/* Display message during Initialization */
+static u8 banner[] __initdata = "DA9052 GPIO Driver, v1.0\n";
+/* Array for registration of the events */
+static u8 event_registration[16];
+/* typedef of the call back functions */
+typedef void ( *gpio_callbacks_t)(u32);
+/* Array of the Callback functions */
+gpio_callbacks_t gpio_callback[16];
+
+
+/*--------------------------------------------------------------------------*/
+/* Local Macro Definitions */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Global Variables */
+/*--------------------------------------------------------------------------*/
+/* unsigned char to check the device already open */
+static u8 gpio_device_open = 0;
+/* GPIO device number */
+static s32 major_number = 0;
+/* Structure of async queue */
+static struct fasync_struct *gpio_fasync_queue;
+/* structure for the device details */
+static struct platform_device *da9052_gpio_platform_device;
+/* mutex for events */
+struct mutex da9052_gpio_event_lock;
+/* Stores last occured event */
+static u16 gpio_event;
+
+/* array of EH structures */
+da9052_eh_nb eh_nb[16];
+
+
+/*--------------------------------------------------------------------------*/
+/* Local Functions */
+/*--------------------------------------------------------------------------*/
+/**
+ * da9052_gpio_signal_to_user: This function signal to the library to call
+ * the callback function for the event.
+ *
+ * @param event event for which library need to be signalled
+ * @return int Error status 0:SUCCESS, Non Zero: Error
+ */
+s32 da9052_gpio_signal_to_user(u16 event)
+{
+ /* Changed the following statement to implement multiple Events */
+ /* gpio_event = event; */
+ mutex_lock(&da9052_gpio_event_lock);
+ gpio_event |= event;
+ mutex_unlock(&da9052_gpio_event_lock);
+ DA9052_DEBUG("%s: event status: %d \n", __FUNCTION__, event);
+ kill_fasync(&gpio_fasync_queue, SIGIO, POLL_IN);
+
+ return(SUCCESS);
+}
+
+
+/**
+ * da9052_gpio0_handler : EH callback function for GPI 0 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio0_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 0 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_0_EVENT);
+}
+
+/**
+ * da9052_gpio1_handler : EH callback function for GPI 1 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio1_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 1 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_1_EVENT);
+}
+
+/**
+ * da9052_gpio2_handler : EH callback function for GPI 2 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio2_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 2 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_2_EVENT);
+}
+
+/**
+ * da9052_gpio3_handler : EH callback function for GPI 3 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio3_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 3 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_3_EVENT);
+}
+
+/**
+ * da9052_gpio4_handler : EH callback function for GPI 4 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio4_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 4 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_4_EVENT);
+}
+
+/**
+ * da9052_gpio5_handler : EH callback function for GPI 5 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio5_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 5 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_5_EVENT);
+}
+
+/**
+ * da9052_gpio6_handler : EH callback function for GPI 6 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio6_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 6 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_6_EVENT);
+}
+
+/**
+ * da9052_gpio7_handler : EH callback function for GPI 7 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio7_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 7 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_7_EVENT);
+}
+
+/**
+ * da9052_gpio8_handler : EH callback function for GPI 8 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio8_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 8 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_8_EVENT);
+}
+
+/**
+ * da9052_gpio9_handler : EH callback function for GPI 9 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio9_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 9 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_9_EVENT);
+}
+
+/**
+ * da9052_gpio10_handler : EH callback function for GPI 10 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio10_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 10 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_10_EVENT);
+}
+
+/**
+ * da9052_gpio11_handler : EH callback function for GPI 11 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio11_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 11 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_11_EVENT);
+}
+
+/**
+ * da9052_gpio12_handler : EH callback function for GPI 12 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio12_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 12 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_12_EVENT);
+}
+
+/**
+ * da9052_gpio13_handler : EH callback function for GPI 13 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio13_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 13 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_13_EVENT);
+}
+
+/**
+ * da9052_gpio14_handler : EH callback function for GPI 14 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio14_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 14 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_14_EVENT);
+}
+
+/**
+ * da9052_gpio15_handler : EH callback function for GPI 15 event
+ *
+ * @param u32 event complete event status
+ * @return void
+ */
+void da9052_gpio15_handler(u32 event)
+{
+ DA9052_DEBUG("In gpio 15 Event: %d\n",event);
+ da9052_gpio_signal_to_user(GPI_15_EVENT);
+}
+
+/**
+ * register_with_eh : Registers with EH for given interrupt
+ *
+ * @param is_registered_flag Tells whether already registered
+ * @param eh_data EH data to be filled up
+ * @param event Event to be registered
+ * @param call_back_fn Callback function for the event
+ * @return void
+ */
+s32 register_with_eh(u8 is_registered_flag, da9052_eh_nb *eh_data, u8 event,
+ void (*call_back_fn)(u32))
+{
+ /* Set the EH data structure to register GPI event */
+ eh_data->eve_type = event;
+ eh_data->call_back = call_back_fn;
+
+ /* Register to the EH for the requested event */
+ if (SUCCESS == da9052_eh_register_nb(eh_data)) {
+ DA9052_DEBUG("\tEvent is registered\n");
+ } else {
+ return (EVENT_REGISTRATION_FAILED);
+ }
+ return (SUCCESS);
+}
+
+/**
+ * create_gpio_config_value: Forms the GPIO value from given configuration
+ *
+ * @param gpio_function GPIO PIN FUNCTION
+ * @param gpio_type GPIO PIN TYPE
+ * @param gpio_mode GPIO PIN MODE
+ * @return int Error Code, zero: no error
+ */
+u8 create_gpio_config_value(u8 gpio_function, u8 gpio_type, u8 gpio_mode)
+{
+ /* The format is -
+ function - 2 bits
+ type - 1 bit
+ mode - 1 bit */
+ return (gpio_function | (gpio_type << 2) | (gpio_mode << 3));
+}
+
+/**
+ * write_default_gpio_values: Initialize the GPIO registers to default
+ *
+ * @param void
+ * @return int Error Code, zero: no error
+ */
+s32 write_default_gpio_values(void)
+{
+ /* SSC read/write structure */
+ da9052_ssc_msg msg;
+ /* receiving formed values */
+ u8 created_val = 0;
+ /* Default configuration of GPIO 0-15 */
+ /* Even GPIOs (e.g. 0,2,4 ..) are placed in lower nibble */
+ /* Odd GPIOs (e.g. 1,3,4 ..) are placed in upper nibble */
+
+ /* GPIO 0-1*/
+ #if (DA9052_GPIO_PIN_0 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0001_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 0 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO0_FUNCTION,
+ DEFAULT_GPIO0_TYPE, DEFAULT_GPIO0_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 0 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_1 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0001_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 1 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO1_FUNCTION,
+ DEFAULT_GPIO1_TYPE, DEFAULT_GPIO1_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 1 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 2-3*/
+ #if (DA9052_GPIO_PIN_2 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0203_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 2 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO2_FUNCTION,
+ DEFAULT_GPIO2_TYPE, DEFAULT_GPIO2_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 2 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_3 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0203_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 3 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO3_FUNCTION,
+ DEFAULT_GPIO3_TYPE, DEFAULT_GPIO3_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 3 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 4-5*/
+ #if (DA9052_GPIO_PIN_4 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0405_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 4 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO4_FUNCTION,
+ DEFAULT_GPIO4_TYPE, DEFAULT_GPIO4_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 4 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_5 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0405_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 5 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO5_FUNCTION,
+ DEFAULT_GPIO5_TYPE, DEFAULT_GPIO5_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 5 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 6-7*/
+ #if (DA9052_GPIO_PIN_6 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0607_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 6 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO6_FUNCTION,
+ DEFAULT_GPIO6_TYPE, DEFAULT_GPIO6_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 6 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_7 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0607_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 7 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO7_FUNCTION,
+ DEFAULT_GPIO7_TYPE, DEFAULT_GPIO7_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 7 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 8-9*/
+ #if (DA9052_GPIO_PIN_8 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0809_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 8 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO8_FUNCTION,
+ DEFAULT_GPIO8_TYPE, DEFAULT_GPIO8_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 8 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_9 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO0809_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 9 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO9_FUNCTION,
+ DEFAULT_GPIO9_TYPE, DEFAULT_GPIO9_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 9 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 10-11*/
+ #if (DA9052_GPIO_PIN_10 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1011_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 10 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO10_FUNCTION,
+ DEFAULT_GPIO10_TYPE, DEFAULT_GPIO10_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 10 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_11 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1011_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 11 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO11_FUNCTION,
+ DEFAULT_GPIO11_TYPE, DEFAULT_GPIO11_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 11 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 12-13*/
+ #if (DA9052_GPIO_PIN_12 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1213_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 12 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO12_FUNCTION,
+ DEFAULT_GPIO12_TYPE, DEFAULT_GPIO12_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 12 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_13 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1213_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 13 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO13_FUNCTION,
+ DEFAULT_GPIO13_TYPE, DEFAULT_GPIO13_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 13 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ /* GPIO 14-15*/
+ #if (DA9052_GPIO_PIN_14 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1415_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 14 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO14_FUNCTION,
+ DEFAULT_GPIO14_TYPE, DEFAULT_GPIO14_MODE);
+ msg.data &= MASK_UPPER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 14 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ #if (DA9052_GPIO_PIN_15 == DA9052_GPIO_CONFIG)
+ msg.addr = DA9052_GPIO1415_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 15 read default failed \n");
+ return (FAILURE);
+ }
+ created_val = create_gpio_config_value(DEFAULT_GPIO15_FUNCTION,
+ DEFAULT_GPIO15_TYPE, DEFAULT_GPIO15_MODE);
+ created_val = created_val << NIBBLE_SHIFT;
+ msg.data &= MASK_LOWER_NIBBLE;
+ msg.data |= created_val;
+
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ DA9052_DEBUG("GPIO 15 write default failed \n");
+ return (FAILURE);
+ }
+ #endif
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_hw_init: Initializes hardware with default settings
+ *
+ * @param void
+ * @return s32 Error Code, zero: no error
+ */
+s32 da9052_gpio_hw_init(void)
+{
+ /* index of the for loop */
+ u8 index = 0;
+ /* Write default GPIO Values */
+ if (SUCCESS != write_default_gpio_values()) {
+ DA9052_DEBUG("GPIO Hardware initialization failed\n");
+ return (FAILURE);
+ }
+ /* Initialize the Callback Function Array and */
+ /* Set EH registration flag to 0 */
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio0_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio1_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio2_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio3_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio4_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio5_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio6_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio7_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio8_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio9_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio10_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio11_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio12_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio13_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio14_handler;
+ event_registration[index] = CLEAR;
+ gpio_callback[index++] = da9052_gpio15_handler;
+
+ /* Initialize mutex required for Gpio Events read */
+ mutex_init(&da9052_gpio_event_lock);
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_hw_exit: Un-register events with EH
+ *
+ * @param void
+ * @return void
+ */
+static void da9052_gpio_hw_exit(void)
+{
+ /* unsigned char for int */
+ u8 index =0;
+ DA9052_DEBUG("I am in function: %s\n", __FUNCTION__);
+
+ /* Before exiting - unregister events with EH */
+ /* While exiting set EH registration flag to 0 */
+ for (index = 0; index < sizeof(event_registration);index++)
+ {
+ /* check if the event is registered
+ If registered then unregister the corresponding notifier
+ block */
+ if (event_registration[index])
+ da9052_eh_unregister_nb(&eh_nb[index]);
+ event_registration[index] = CLEAR;
+ }
+ /* Delete Mutex */
+ mutex_destroy(&da9052_gpio_event_lock);
+}
+
+/*--------------------------------------------------------------------------*/
+/* Global Functions */
+/*--------------------------------------------------------------------------*/
+
+/**
+ * da9052_gpio_read_port: Reads the specified GPIO port
+ *
+ * @param read_port GPIO Port to be read
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_read_port(da9052_gpio_read_write_t *read_port)
+{
+ /* SSC struture variable */
+ da9052_ssc_msg msg;
+ /* u8 for the Shifted 8 bit value */
+ u8 shift_value = 0;
+ /* variable for the current pin function */
+ u8 port_functionality = 0;
+
+ /* Find out the register to modify */
+ msg.addr = (read_port->port_number / 2) + DA9052_GPIO0001_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS)
+ return (FAILURE);
+
+ /* Even GPIOs (e.g. 0,2,4 ..) are placed in lower nibble */
+ /* Odd GPIOs (e.g. 1,3,4 ..) are placed in upper nibble */
+ /* Check whether to read the upper nibble or lower */
+ port_functionality =
+ (read_port->port_number % 2) ?
+ ((msg.data & ODD_PORT_FUNCTIONALITY) >> NIBBLE_SHIFT):
+ (msg.data & EVEN_PORT_FUNCTIONALITY);
+
+ /* Check if the port is not configured for Input functionality */
+ if (port_functionality != INPUT)
+ return (INVALID_PORTNUMBER);
+
+
+ /* Check if Port Number greater than MAX_PORTNUMBER */
+ if (read_port->port_number >= (MAX_PORTNUMBER)) {
+ return (INVALID_PORTNUMBER);
+ }
+ /* Check if Port Number greater than the no of ports in the register */
+ if (read_port->port_number < MAX_PORTS_PER_REGISTER)
+ msg.addr = DA9052_STATUSC_REG;
+ else
+ msg.addr = DA9052_STATUSD_REG;
+ msg.data = 0;
+
+ /* Read the corresponding register through ssc */
+ if (SUCCESS != da9052_ssc_read (&msg)) {
+ DA9052_DEBUG(" SSC READ FAILED in %s()\n",__FUNCTION__);
+ return (FAILURE);
+ }
+
+ /* Get the value of the required bit corresponding to the port number*/
+ shift_value = msg.data & (1 << SHIFT_COUNT(read_port->port_number));
+ read_port->read_write_value = (shift_value >>
+ SHIFT_COUNT(read_port->port_number));
+
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_multiple_read: Reads all the GPIO ports
+ *
+ * @param multiple_port Array of Signals to be read
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_multiple_read(da9052_gpio_multiple_read_t *multiple_port)
+{
+ /* SSC data structure Vareiable */
+ da9052_ssc_msg msg[2];
+ /* Variable to hold the POrt Number */
+ u8 port_number =0;
+ /* Unsigned Char to check array indexing */
+ u8 loop_index = 0;
+
+
+ /* Read Status C register */
+ msg[loop_index++].addr = DA9052_STATUSC_REG;
+ /* Read Status D register */
+ msg[loop_index++].addr = DA9052_STATUSD_REG;
+
+ /* Use SSC read Many function */
+ if (SUCCESS != da9052_ssc_read_many(msg,loop_index)) {
+ DA9052_DEBUG(" SSC READ MANY FAILED in %s()\n",__FUNCTION__);
+ return (FAILURE);
+ }
+ /* Return the Status Reg values */
+ loop_index = 0;
+ for (port_number =0; port_number < MAX_PORTS_PER_REGISTER;port_number++) {
+ multiple_port->signal_value[port_number] =
+ msg[loop_index].data & 1;
+ msg[loop_index].data = msg[loop_index].data >> 1;
+ }
+ loop_index++;
+ for (port_number =MAX_PORTS_PER_REGISTER; port_number < MAX_PORTNUMBER;
+ port_number++) {
+ multiple_port->signal_value[port_number] =
+ msg[loop_index].data & 1;
+ msg[loop_index].data = msg[loop_index].data >> 1;
+ }
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_write_port: Writes to specified GPIO port
+ *
+ * @param write_port GPIO Port to be written
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_write_port(da9052_gpio_read_write_t *write_port)
+{
+ /*SSC Communication Structure */
+ da9052_ssc_msg msg;
+ /* variable to find the Currently used Functionality */
+ u8 port_functionality = 0;
+ /*variable to get the Bit position for setting the mode */
+ u8 bit_pos = 0;
+
+ /* Check if the port is an output port */
+ msg.addr = DA9052_GPIO0001_REG + (write_port->port_number / 2);
+ msg.data = 0;
+ if (da9052_ssc_read (&msg) != SUCCESS) {
+ DA9052_DEBUG(" SSC READ FAILED in %s()\n",__FUNCTION__);
+ return (FAILURE);
+ }
+ port_functionality =
+ (write_port->port_number % 2) ?
+ ((msg.data & ODD_PORT_FUNCTIONALITY) >> NIBBLE_SHIFT):
+ (msg.data & EVEN_PORT_FUNCTIONALITY);
+
+ if (port_functionality < 2)
+ return (INVALID_PORTNUMBER);
+
+ /* Bit position is the highest bit in a nibble */
+ /* Even GPIOs (e.g. 0,2,4 ..) are placed in lower nibble */
+ /* Odd GPIOs (e.g. 1,3,4 ..) are placed in upper nibble */
+ bit_pos = (write_port->port_number % 2) ? ODD_PORT_WRITE_MODE :
+ EVEN_PORT_WRITE_MODE;
+
+ /* Set the Corresponding Write port signal with the value
+ from the user */
+ msg.data = write_port->read_write_value ? set_bits(msg.data, bit_pos) :
+ clear_bits(msg.data, bit_pos);
+
+ /* Write register */
+ if (da9052_ssc_write(&msg) != SUCCESS) {
+ return (FAILURE);
+ }
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_configure_port: Configures the GPIO port
+ *
+ * @param gpio_data GPIO Port to be configured
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_configure_port(da9052_gpio_t *gpio_data)
+{
+ /* SSC data type variable*/
+ da9052_ssc_msg msg;
+ /* variable for the configure value */
+ u8 register_value = 0;
+ /* variable for the input pin function */
+ u8 function = 0;
+ /* variable for the current pin function */
+ u8 port_functionality = 0;
+
+ /* Find out the register to modify */
+ msg.addr = (gpio_data->port_number / 2) + DA9052_GPIO0001_REG;
+ msg.data = 0;
+ if (da9052_ssc_read(&msg) != SUCCESS)
+ return (FAILURE);
+
+ /* Even GPIOs (e.g. 0,2,4 ..) are placed in lower nibble */
+ /* Odd GPIOs (e.g. 1,3,4 ..) are placed in upper nibble */
+ /* Check whether to read the upper nibble or lower */
+ port_functionality =
+ (gpio_data->port_number % 2) ?
+ ((msg.data & ODD_PORT_FUNCTIONALITY) >> NIBBLE_SHIFT):
+ (msg.data & EVEN_PORT_FUNCTIONALITY);
+
+ /* Check if the port is not configured for Altenate functionality */
+ if (port_functionality < INPUT)
+ return (INVALID_PORTNUMBER);
+ /* Check GPIO type */
+ if (gpio_data->gpio_config.input.type > ACTIVE_HIGH)
+ return (INVALID_TYPE);
+ /* Check Input GPIO mode */
+ if (gpio_data->gpio_config.input.mode > DEBOUNCING_ON)
+ return (INVALID_MODE);
+ /* Check Input GPIO function */
+ function = gpio_data->gpio_function;
+ switch (function) {
+ case INPUT:
+ register_value = create_gpio_config_value(function,
+ gpio_data->gpio_config.input.type,
+ gpio_data->gpio_config.input.mode);
+ break;
+ case OUTPUT_OPENDRAIN:
+ case OUTPUT_PUSHPULL:
+ register_value = create_gpio_config_value(function,
+ gpio_data->gpio_config.input.type,
+ gpio_data->gpio_config.input.mode);
+ break;
+ default:
+ return (DA9052_GPIO_INVALID_FUNCTION);
+ break;
+ }
+
+ /* Even GPIOs (e.g. 0,2,4 ..) are placed in lower nibble */
+ /* Odd GPIOs (e.g. 1,3,4 ..) are placed in upper nibble */
+ /* Check whether to modify the upper nibble or lower */
+ if (gpio_data->port_number % 2) {
+ /* It is upper nibble */
+ /* Clear the Upper Nibble and Configure it with the new value */
+ msg.data = (clear_bits(msg.data, MASK_UPPER_NIBBLE)) |
+ (register_value << NIBBLE_SHIFT);
+ } else {
+ /* It is lower nibble */
+ /* Clear the lower Nibble and Configure it with the new value */
+ msg.data = (clear_bits(msg.data, MASK_LOWER_NIBBLE)) |
+ register_value;
+ }
+
+ /* Write the register */
+ if (da9052_ssc_write(&msg) != SUCCESS)
+ printk ("Write failed in configure\n");
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_register_event : Register gpio event with EH
+ *
+ * @param u8 event_type GPI Event Type
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+s32 da9052_gpio_register_event(u8 event_type)
+{
+ da9052_ssc_msg msg;
+ u8 port_functionality = 0;
+ s32 ret = 0;
+ DA9052_DEBUG("I am in function: %s \n", __FUNCTION__);
+
+ /* Check if the port is an output port by reading the register
+ Contenets*/
+ msg.addr = DA9052_GPIO0001_REG + (event_type/2);
+ msg.data = 0;
+ if (SUCCESS != da9052_ssc_read (&msg)) {
+ DA9052_DEBUG(" SSC READ FAILED in %s()\n",__FUNCTION__);
+ return (FAILURE);
+ }
+ port_functionality =
+ (event_type % 2) ?
+ ((msg.data & ODD_PORT_FUNCTIONALITY) >> NIBBLE_SHIFT):
+ (msg.data & EVEN_PORT_FUNCTIONALITY);
+
+ if (INPUT != port_functionality)
+ return (INVALID_PORTNUMBER);
+
+ /* Check event type is already registered */
+ if (event_registration[event_type])
+ return (EVENT_ALREADY_REGISTERED);
+ /* IF unregistered register it with EH */
+ ret = register_with_eh(event_registration[event_type],
+ &eh_nb[event_type],
+ GPI0_EVE + event_type,
+ gpio_callback[event_type]);
+
+ if (SUCCESS == ret) {
+ /* Set the event variable to 1 */
+ event_registration[event_type] = SET;
+ } else {
+ /* Return Failure cause */
+ return (ret);
+ }
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_unregister_event : Un-register gpio event with EH
+ *
+ * @param u8 event_type Event Number
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+s32 da9052_gpio_unregister_event(u8 event_type)
+{
+ DA9052_DEBUG("I am in function: %s \n", __FUNCTION__);
+ /* Check if the Event is not Registerd for the Corresponding Pin*/
+ if (!event_registration[event_type])
+ return (EVENT_UNREGISTERED);
+ /* Else Unregister the Evant from EH */
+ if (SUCCESS != da9052_eh_unregister_nb(&eh_nb[event_type]))
+ return (EVENT_UNREGISTRATION_FAILED);
+ /* Set flag to 0 */
+ event_registration[event_type] = CLEAR;
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_read : Read Gpio status
+ *
+ * @param gc Gpio chip structure
+ * @param offset Gpio Number offset from base Gpio number
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+static s32 da9052_gpio_read (struct gpio_chip *gc, u32 offset)
+{
+ da9052_gpio_chip_t * gpio;
+ gpio = container_of(gc, da9052_gpio_chip_t, gp);
+ gpio->read_write.port_number = offset;
+ da9052_gpio_read_port (&gpio->read_write);
+ return (gpio->read_write.read_write_value);
+}
+
+/**
+ * da9052_gpio_write : Write Gpio level
+ *
+ * @param gc Gpio chip structure
+ * @param offset Gpio Number offset from base Gpio number
+ * @param value Level for Gpio
+ * @return void
+ */
+static void da9052_gpio_write (struct gpio_chip *gc, u32 offset, s32 value)
+{
+ da9052_gpio_chip_t * gpio;
+ gpio = container_of(gc, da9052_gpio_chip_t, gp);
+ gpio->read_write.port_number = offset;
+ gpio->read_write.read_write_value = (u8)value;
+ da9052_gpio_write_port (&gpio->read_write);
+}
+
+/**
+ * da9052_gpio_ip : Read Gpio level
+ *
+ * @param gc Gpio chip structure
+ * @param offset Gpio Number offset from base Gpio number
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+static s32 da9052_gpio_ip (struct gpio_chip *gc, u32 offset)
+{
+ s32 ret = 0;
+ da9052_gpio_chip_t * gpio;
+ gpio = container_of(gc, da9052_gpio_chip_t, gp);
+ gpio->gpio.gpio_function = INPUT;
+ gpio->gpio.gpio_config.input.type = ACTIVE_LOW;
+ gpio->gpio.gpio_config.input.mode = DEBOUNCING_ON;
+ gpio->gpio.port_number = offset;
+ ret = da9052_gpio_configure_port (&gpio->gpio);
+ return (ret);
+}
+
+/**
+ * da9052_gpio_op : Read Gpio level
+ *
+ * @param gc Gpio chip structure
+ * @param offset Gpio Number offset from base Gpio number
+ * @param value Level for Gpio
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+static s32 da9052_gpio_op (struct gpio_chip *gc, u32 offset, s32 value)
+{
+ s32 ret = 0;
+ da9052_gpio_chip_t * gpio;
+ gpio = container_of(gc, da9052_gpio_chip_t, gp);
+ gpio->gpio.gpio_function = OUTPUT_PUSHPULL;
+ gpio->gpio.gpio_config.output.type = SUPPLY_VDD_IO2;
+ gpio->gpio.gpio_config.output.mode = value;
+ gpio->gpio.port_number = offset;
+ ret = da9052_gpio_configure_port (&gpio->gpio);
+ return(ret);
+}
+
+/*--------------------------------------------------------------------------*/
+/* Infrastructure Functions */
+/*--------------------------------------------------------------------------*/
+
+/**
+ * da9052_gpio_open:
+ *
+ * @param *inode pointer to device inode
+ * @param *file file pointer
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_open(struct inode *inode, struct file *file)
+{
+ /* Check if device is already open */
+ if(gpio_device_open == OPEN) {
+ DA9052_DEBUG("DA9052: gpio device already open.\n");
+ return (-EBUSY);
+ } else {
+ gpio_device_open++;
+ return SUCCESS;
+ }
+}
+
+/**
+ * da9052_gpio_release:
+ *
+ * @param *inode pointer to device inode
+ * @param *file file pointer
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_release(struct inode *inode, struct file *file)
+{
+ gpio_device_open--;
+ DA9052_DEBUG("DA9052: GPIO device closed.\n");
+ return SUCCESS;
+}
+
+/**
+ * da9052_gpio_suspend: Power Management support function
+ *
+ * @param *dev pointer to platform device
+ * @param state pm state
+ * @return 0
+ */
+static s32 da9052_gpio_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* Put your suspend related operations here */
+ printk(KERN_INFO "%s: called\n", __FUNCTION__);
+ return (0);
+}
+
+/**
+ * da9052_gpio_resume: Power Management support function
+ *
+ * @param *dev pointer to platform device
+ * @return 0
+ */
+static s32 da9052_gpio_resume(struct platform_device *dev)
+{
+ /* Put your resume related operations here */
+ printk(KERN_INFO "%s: called\n", __FUNCTION__);
+ return (0);
+}
+
+/**
+ * da9052_gpio_ioctl: Provides the IOCTL interface
+ *
+ * @param *inode pointer to device inode
+ * @param *file file pointer
+ * @param cmd command to be executed
+ * @param arg argument to command
+ * @return int Error Code, zero: no error
+ */
+s32 da9052_gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ da9052_gpio_read_write_t read_write_params;
+ da9052_gpio_multiple_read_t multiple_read;
+ da9052_gpio_t config_port;
+ u8 input;
+ u16 copy_event = 0;
+ s32 return_value;
+
+ /* Check the IOCTL command */
+ switch(cmd) {
+ case DA9052_GPIO_IOCTL_READ_PORT:
+ DA9052_DEBUG("%s():DA9052_GPIO_IOCTL_READ_PORT \
+ called\n", __FUNCTION__);
+ /* Copy parameters from user space */
+ if (copy_from_user(&read_write_params,
+ (da9052_gpio_read_write_t *) arg,
+ sizeof(da9052_gpio_read_write_t)))
+ return (COPY_FROM_USER_FAILED);
+ /* In/Out Parameter - da9052_gpio_read_write_t* */
+ return_value = da9052_gpio_read_port(&read_write_params);
+ if (return_value != SUCCESS)
+ return(return_value);
+
+ /* Copy parameters to user space */
+ if(copy_to_user((da9052_gpio_read_write_t *)arg,
+ &read_write_params, sizeof(da9052_gpio_read_write_t)))
+ return (COPY_TO_USER_FAILED);
+ break;
+ case DA9052_GPIO_IOCTL_WRITE_PORT:
+ DA9052_DEBUG("%s():DA9052_GPIO_IOCTL_WRITE_PORT \
+ called\n", __FUNCTION__);
+ /* Copy parameters from user space */
+ if (copy_from_user(&read_write_params,
+ (da9052_gpio_read_write_t *) arg,
+ sizeof(da9052_gpio_read_write_t)))
+ return (COPY_FROM_USER_FAILED);
+ /* In Parameter - da9052_gpio_read_write_t* */
+ return_value = da9052_gpio_write_port(&read_write_params);
+ if (return_value != SUCCESS)
+ return (return_value);
+ break;
+ case DA9052_GPIO_IOCTL_CONFIGURE_PORT:
+ DA9052_DEBUG("%s():DA9052_GPIO_IOCTL_CONFIGURE_PORT \
+ called\n", __FUNCTION__);
+ /* Copy parameters from user space */
+ if (copy_from_user( &config_port,
+ (da9052_gpio_t *) arg, sizeof(da9052_gpio_t)))
+ return(COPY_FROM_USER_FAILED);
+ /* In Parameter - da9052_gpio_t* */
+ return_value = da9052_gpio_configure_port(&config_port);
+ if (return_value != SUCCESS)
+ return (return_value);
+ break;
+ case DA9052_GPIO_IOCTL_READ_ALL_PORTS:
+ DA9052_DEBUG("%s():DA9052_GPIO_IOCTL_READ_ALL_PORTS \
+ called\n", __FUNCTION__);
+ /* In/Out Parameter - da9052_gpio_multiple_read_t* */
+ return_value = da9052_gpio_multiple_read (&multiple_read);
+ if (return_value != SUCCESS)
+ return (return_value);
+
+ /* Copy parameters to user space */
+ if(copy_to_user((da9052_gpio_multiple_read_t *) arg,
+ & multiple_read,
+ sizeof(da9052_gpio_multiple_read_t)))
+ return (COPY_TO_USER_FAILED);
+ break;
+ case DA9052_GPIO_IOCTL_GET_EVENT:
+ /* Out Parameter - unsigned char* */
+ /* Acquire the the Mutex */
+ mutex_lock(&da9052_gpio_event_lock);
+ /* Copy event status into the variable */
+ copy_event = gpio_event;
+ /* Clear the global variable */
+ gpio_event =0;
+ /*Unlock the mutex */
+ mutex_unlock(&da9052_gpio_event_lock);
+ DA9052_DEBUG ("Event = %d\n",copy_event);
+ if(copy_to_user((u16 *)arg, ©_event, sizeof(u16)))
+ return (FAILURE);
+ break;
+ case DA9052_GPIO_IOCTL_REGISTER_EVENT:
+ if (copy_from_user(&input, (u8*) arg, sizeof(input)))
+ return (FAILURE);
+ /* Input Parameter - unsigned char* */
+ return (da9052_gpio_register_event(input));
+ break;
+ case DA9052_GPIO_IOCTL_UNREGISTER_EVENT:
+ if (copy_from_user(&input, (u8*) arg, sizeof(input)))
+ return (FAILURE);
+ /* Input Parameter - unsigned char* */
+ return (da9052_gpio_unregister_event(input));
+ break;
+ default:
+ DA9052_DEBUG ("Invalid ioctl command\n");
+ return (DA9052_GPIO_INVALID_IOCTL);
+ break;
+ }
+ return (SUCCESS);
+}
+
+/**
+ * da9052_gpio_fasync: Register file descriptor asynchronous notification
+ * for events
+ *
+ * @param s32 fd File descriptor
+ * @param strcut file *filp File structure
+ * @param s32 on fasync state
+ * @return s32 Error status 0:SUCCESS, Non Zero: Error
+ */
+s32 da9052_gpio_fasync(s32 fd, struct file *filp, s32 on)
+{
+ s32 ret;
+ DA9052_DEBUG("__%s__\n", __FUNCTION__);
+ DA9052_DEBUG ("In %s: %s\n",__FILE__, __FUNCTION__);
+ ret = fasync_helper(fd, filp, on, &gpio_fasync_queue);
+ DA9052_DEBUG("Ret from fasync_helper = %d \n", ret);
+ return (ret);
+}
+
+/**
+ * static struct file_operations da9052_wl_fops -
+ * This structure definition has to be defined here as an exception.
+ * @owner: member description
+ * @open : member description
+ * @release: member description
+ * @ioctl: member description
+ *
+ */
+static const struct file_operations da9052_gpio_fops = {
+ .owner = THIS_MODULE,
+ .open = da9052_gpio_open,
+ .release = da9052_gpio_release,
+ .ioctl = da9052_gpio_ioctl,
+ .fasync = da9052_gpio_fasync
+};
+
+/**
+ * da9052_gpio_probe: Called when a device gets attached to driver
+ *
+ * @param *dev pointer to platform device
+ * @return int Error Code, zero: no error
+ */
+static int __devinit da9052_gpio_probe(struct platform_device *dev)
+{
+ s32 ret;
+ da9052_gpio_chip_t *gpio;
+ /* Register the device */
+ ret = register_chrdev(major_number, DA9052_GPIO_DEVICE_NAME,
+ &da9052_gpio_fops);
+ if (ret < 0) {
+ printk("DA9052: Unable to get major number.\n");
+ return (-EFAULT);
+ } else {
+ major_number = ret;
+ printk(KERN_INFO "%s: Major number is: %d.\n",
+ DA9052_GPIO_DEVICE_NAME, major_number);
+
+ if (da9052_gpio_hw_init()) {
+ printk(KERN_INFO"DA9052: Failed to initialize \
+ DA9052 Device.\n");
+ unregister_chrdev(major_number, DA9052_GPIO_DEVICE_NAME);
+ return (-EFAULT);
+ } else {
+ gpio = kzalloc(sizeof(da9052_gpio_chip_t), GFP_KERNEL);
+ if (gpio == NULL)
+ return (-ENOMEM);
+ gpio->gp.get = da9052_gpio_read;
+ gpio->gp.direction_input = da9052_gpio_ip;
+ gpio->gp.direction_output = da9052_gpio_op;
+ gpio->gp.set = da9052_gpio_write;
+
+ gpio->gp.base = 0;
+ gpio->gp.ngpio = MAX_PORTNUMBER;
+ gpio->gp.can_sleep = 1;
+ gpio->gp.dev = &dev->dev;
+ gpio->gp.owner = THIS_MODULE;
+
+ return (SUCCESS);
+ }
+ }
+}
+
+/**
+ * da9052_gpio_remove: Called when detaching device from driver
+ * @param *dev pointer to platform device
+ * @return int Error Code, zero: no error
+ */
+static int __devexit da9052_gpio_remove(struct platform_device *dev)
+{
+ DA9052_DEBUG(KERN_DEBUG "Removing %s \n", DA9052_GPIO_DEVICE_NAME);
+ return (SUCCESS);
+}
+
+/**
+ * static struct platform_driver da9052_gpio_driver -
+ * This structure definition has to be defined here as an exception.
+ * @probe: Probe function for this device.
+ * @remove: Function to be called when removing this device from platform
+ * @suspend: Function to be called in suspend mode
+ * @resume: Function to be called in resume mode
+ * @driver: Contains glue logic to bind platform device and plarform driver
+ */
+static struct platform_driver da9052_gpio_driver = {
+ .probe = da9052_gpio_probe,
+ .remove = __devexit_p(da9052_gpio_remove),
+ .suspend = da9052_gpio_suspend,
+ .resume = da9052_gpio_resume,
+ .driver = {
+ .name = DA9052_GPIO_DEVICE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * da9052_gpio_init: Initiates the driver
+ *
+ * @param void
+ * @return int Error Code, zero: no error
+ */
+static int __init da9052_gpio_init(void)
+{
+ int retval;
+ printk(banner);
+
+ /* Create a platform device object */
+ da9052_gpio_platform_device =
+ platform_device_alloc(DA9052_GPIO_DEVICE_NAME, 0);
+ if (!da9052_gpio_platform_device)
+ return (-ENOMEM);
+
+ /* Add platform device to device hierarchy */
+ retval = platform_device_add(da9052_gpio_platform_device);
+ if (retval < 0) {
+ /* Free all memory associated with a platform device */
+ platform_device_put(da9052_gpio_platform_device);
+ return (retval);
+ }
+
+ retval = platform_driver_register(&da9052_gpio_driver);
+ if (retval < 0)
+ /* Unregister the platform level device */
+ platform_device_unregister(da9052_gpio_platform_device);
+ return (retval);
+}
+
+/**
+ * da9052_gpio_exit: Closes the driver
+ *
+ * @param void
+ * @return void
+ */
+static void __exit da9052_gpio_exit(void)
+{
+ printk("DA9052: Unregistering gpio device.\n");
+
+ /* De-initializes */
+ da9052_gpio_hw_exit();
+
+ /* Unregister the driver */
+ unregister_chrdev(major_number, DA9052_GPIO_DEVICE_NAME);
+
+ platform_driver_unregister(&da9052_gpio_driver);
+ /* Unregister the platform level device */
+ platform_device_unregister(da9052_gpio_platform_device);
+}
+
+module_init(da9052_gpio_init);
+module_exit(da9052_gpio_exit);
+
+MODULE_AUTHOR("Dialog Semiconductor Ltd");
+MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+/*--------------------------------------------------------------------------*/
+/* Exports */
+/*--------------------------------------------------------------------------*/
+
+/* All functions accessible from other drivers */
+EXPORT_SYMBOL(da9052_gpio_read_port);
+EXPORT_SYMBOL(da9052_gpio_write_port);
+EXPORT_SYMBOL(da9052_gpio_configure_port);
+EXPORT_SYMBOL(da9052_gpio_multiple_read);
+/* END OF FILE */
diff -Naur linux-2.6.33.2_bk/drivers/gpio/Makefile linux-2.6.33.2_patch/drivers/gpio/Makefile
--- linux-2.6.33.2_bk/drivers/gpio/Makefile 2010-04-02 04:02:33.000000000 +0500
+++ linux-2.6.33.2_patch/drivers/gpio/Makefile 2010-05-18 18:09:37.000000000 +0500
@@ -22,3 +22,4 @@
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
+obj-$(CONFIG_DA9052_GPIO_ENABLE) += da9052_gpio.o
diff -Naur linux-2.6.33.2_bk/drivers/mfd/Kconfig linux-2.6.33.2_patch/drivers/mfd/Kconfig
--- linux-2.6.33.2_bk/drivers/mfd/Kconfig 2010-05-18 17:54:30.000000000 +0500
+++ linux-2.6.33.2_patch/drivers/mfd/Kconfig 2010-05-18 18:09:37.000000000 +0500
@@ -377,6 +377,13 @@
help
Say Y to enable the ADC driver for the DA9052 chip
+config DA9052_GPIO_ENABLE
+ bool "Dialog Semiconductor DA9052 GPIO Driver"
+ depends on MFD_DA9052
+ select GPIOLIB
+ help
+ Say Y to enable the GPIO driver for the DA9052 chip
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff -Naur linux-2.6.33.2_bk/include/linux/mfd/da9052/da9052_gpio.h linux-2.6.33.2_patch/include/linux/mfd/da9052/da9052_gpio.h
--- linux-2.6.33.2_bk/include/linux/mfd/da9052/da9052_gpio.h 1970-01-01 05:00:00.000000000 +0500
+++ linux-2.6.33.2_patch/include/linux/mfd/da9052/da9052_gpio.h 2010-05-18 18:09:37.000000000 +0500
@@ -0,0 +1,529 @@
+/*
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * da9052_gpio.h: GPIO driver file for DA9052
+ *
+ * History:
+ *
+ * (05/05/2009) Unit tested Code
+ *
+ * (27/04/2010): Updated for Linux Community release
+ *
+ * Best Viewed with TabSize=8 and ColumnWidth=80
+ */
+
+
+#ifndef _DA9052_GPIO_H
+#define _DA9052_GPIO_H
+
+/*--------------------------------------------------------------------------*/
+/* System wide include files */
+/*--------------------------------------------------------------------------*/
+#include <linux/gpio.h>
+/*--------------------------------------------------------------------------*/
+/* Module specific include files */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Type Definitions */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Constant Definitions */
+/*--------------------------------------------------------------------------*/
+
+/* String for the Identification */
+#define DA9052_GPIO_DEVICE_NAME "da9052_gpio"
+
+/* Calculate the size of the variable */
+#define len_array(arr) (sizeof(arr)/sizeof(arr[0]))
+
+/*--------------------------------------------------------------------------*/
+/* Error Codes */
+/*--------------------------------------------------------------------------*/
+/* Failed Copy from User */
+#define COPY_FROM_USER_FAILED (3)
+
+/* Failed Copy to User */
+#define COPY_TO_USER_FAILED (4)
+
+/* Invalid Ioctl */
+#define DA9052_GPIO_INVALID_IOCTL (5)
+
+//#define INVALID_SIGNAL_LEVEL (6)
+/* Invalid functionality code for the
+ corresponding pin */
+#define DA9052_GPIO_INVALID_FUNCTION (7)
+
+/* Invalid event for the corresponding pin */
+#define INVALID_EVENT (8)
+
+/* Event Registration with EH failed */
+#define EVENT_REGISTRATION_FAILED (9)
+
+/* Event Unregistration with EH failed */
+#define EVENT_UNREGISTRATION_FAILED (10)
+
+/* Invalid Signal level in case of Input */
+/* Invalid Voltage source in case of Output */
+#define INVALID_TYPE (11)
+
+/* Invalid Debouncing in case of Input */
+/* Invalid Signal level in case of Output */
+#define INVALID_MODE (12)
+
+/* Invalid Port Number */
+#define INVALID_PORTNUMBER (13)
+
+/* Corresponding Pin has Already
+ been registered with EH */
+#define EVENT_ALREADY_REGISTERED (14)
+
+/* Corresponding Pin has Already
+ been Unregistered with EH */
+#define EVENT_UNREGISTERED (15)
+
+/* --------------------------------------------------------------------------*/
+/* IOCTL calls that are permitted to the /dev/gpio interface, if */
+/* any of the drivers are enabled. */
+/*--------------------------------------------------------------------------*/
+/* Read GPIO port */
+#define DA9052_GPIO_IOCTL_READ_PORT (1)
+
+/* Write GPIO port */
+#define DA9052_GPIO_IOCTL_WRITE_PORT (2)
+
+/* Configure GPIO port */
+#define DA9052_GPIO_IOCTL_CONFIGURE_PORT (3)
+
+/* Read multiple GPIO ports */
+#define DA9052_GPIO_IOCTL_READ_ALL_PORTS (4)
+
+/* Get last event occured */
+#define DA9052_GPIO_IOCTL_GET_EVENT (5)
+
+/* Register for an event */
+#define DA9052_GPIO_IOCTL_REGISTER_EVENT (6)
+
+/* Unregister for an event */
+#define DA9052_GPIO_IOCTL_UNREGISTER_EVENT (7)
+
+
+/*--------------------------------------------------------------------------*/
+/* Defines for Various Pin Configurations of the Gpio pins */
+/*--------------------------------------------------------------------------*/
+/* ADC pin Configuration */
+#define DA9052_GPIO_CONFIG_ADC (1)
+
+/* TSI pin Configuration */
+#define DA9052_GPIO_CONFIG_TSI (2)
+
+/* Power Manager pin Configuration */
+#define DA9052_GPIO_CONFIG_PM (3)
+
+/* USB ID detect pin Configuration */
+#define DA9052_GPIO_CONFIG_ACC_ID_DET (4)
+
+/* General Purpose FB1 Configuration */
+#define DA9052_GPIO_CONFIG_GP_FB1 (5)
+
+/* VDD fault Configuration */
+#define DA9052_GPIO_CONFIG_VDD_FAULT (6)
+
+/* I2C Pin configuration */
+#define DA9052_GPIO_CONFIG_I2C (7)
+
+/* Input/Output Pin Configuration */
+#define DA9052_GPIO_CONFIG (8)
+
+/*--------------------------------------------------------------------------*/
+/* Currently used defines for GPIO PINs */
+/*--------------------------------------------------------------------------*/
+
+/* ADC pin Configuration */
+#define DA9052_GPIO_PIN_0 DA9052_GPIO_CONFIG_ADC
+#define DA9052_GPIO_PIN_1 DA9052_GPIO_CONFIG_ADC
+#define DA9052_GPIO_PIN_2 DA9052_GPIO_CONFIG_ADC
+
+/* TSI pin Configuration */
+#define DA9052_GPIO_PIN_3 DA9052_GPIO_CONFIG_TSI
+#define DA9052_GPIO_PIN_4 DA9052_GPIO_CONFIG_TSI
+#define DA9052_GPIO_PIN_5 DA9052_GPIO_CONFIG_TSI
+#define DA9052_GPIO_PIN_6 DA9052_GPIO_CONFIG_TSI
+#define DA9052_GPIO_PIN_7 DA9052_GPIO_CONFIG_TSI
+
+/* Input Pin Configuration */
+#define DA9052_GPIO_PIN_8 DA9052_GPIO_CONFIG
+#define DA9052_GPIO_PIN_9 DA9052_GPIO_CONFIG
+#define DA9052_GPIO_PIN_10 DA9052_GPIO_CONFIG
+#define DA9052_GPIO_PIN_11 DA9052_GPIO_CONFIG
+
+/* Output Pin Configuration */
+#define DA9052_GPIO_PIN_12 DA9052_GPIO_CONFIG
+#define DA9052_GPIO_PIN_13 DA9052_GPIO_CONFIG
+
+/* Configuring for High Speed I2C */
+#define DA9052_GPIO_PIN_14 DA9052_GPIO_CONFIG_I2C
+#define DA9052_GPIO_PIN_15 DA9052_GPIO_CONFIG_I2C
+
+/*--------------------------------------------------------------------------*/
+/* To enable debug output, set this to 1 */
+/*--------------------------------------------------------------------------*/
+#define DA9052_GPIO_DEBUG (0)
+
+#undef DA9052_DEBUG
+#if DA9052_GPIO_DEBUG
+#define DA9052_DEBUG( fmt, args... ) printk( KERN_CRIT "" fmt, ##args )
+#else
+#define DA9052_DEBUG( fmt, args... )
+#endif
+
+/**
+ * enum ip_op_type - GPIO pin functionality
+ * @ALTERNATE_FUNCTIONALITY: configured as alternate functionality
+ * @INPUT: configured as GPI
+ * @OUTPUT_OPENDRAIN: configured as GPO open-drain
+ * @OUTPUT_PUSHPULL: configured as GPO push-pull
+ *
+ */
+enum ip_op_type {
+ ALTERNATE_FUNCTIONALITY = 0,
+ INPUT,
+ OUTPUT_OPENDRAIN,
+ OUTPUT_PUSHPULL
+};
+
+
+/**
+ * enum ip_type - GPI type
+ * @ACTIVE_LOW: active low
+ * @ACTIVE_HIGH: active high
+ *
+ */
+enum ip_type {
+ ACTIVE_LOW = 0,
+ ACTIVE_HIGH
+};
+
+/**
+ * enum op_type - GPO type
+ * @SUPPLY_VDD_IO1: supplied from VDDIO1/ internal pull-up
+ * @SUPPLY_VDD_IO2: supplied from VDDIO2/ external pull-up
+ *
+ */
+enum op_type {
+ SUPPLY_VDD_IO1 = 0,
+ SUPPLY_VDD_IO2
+};
+
+/**
+ * enum op_mode - GPO mode
+ * @OUTPUT_LOWLEVEL: low
+ * @OUTPUT_HIGHLEVEL: high
+ *
+ */
+enum op_mode {
+ OUTPUT_LOWLEVEL = 0,
+ OUTPUT_HIGHLEVEL
+};
+
+/**
+ * enum ip_mode - GPI mode
+ * @DEBOUNCING_OFF: debouncing off
+ * @DEBOUNCING_ON: debouncing on
+ *
+ */
+enum ip_mode {
+ DEBOUNCING_OFF = 0,
+ DEBOUNCING_ON
+};
+
+/**
+ * enum da9052_gpi_event_type - GPI event types
+ * @GPI_0_EVENT: Event for GPI port 0
+ * @GPI_1_EVENT: Event for GPI port 1
+ * ...
+ * @GPI_15_EVENT: Event for GPI port 15
+ *
+ */
+enum da9052_gpi_event_type {
+ GPI_0_EVENT = (1<<0),
+ GPI_1_EVENT = (1<<1),
+ GPI_2_EVENT = (1<<2),
+ GPI_3_EVENT = (1<<3),
+ GPI_4_EVENT = (1<<4),
+ GPI_5_EVENT = (1<<5),
+ GPI_6_EVENT = (1<<6),
+ GPI_7_EVENT = (1<<7),
+ GPI_8_EVENT = (1<<8),
+ GPI_9_EVENT = (1<<9),
+ GPI_10_EVENT = (1<<10),
+ GPI_11_EVENT = (1<<11),
+ GPI_12_EVENT = (1<<12),
+ GPI_13_EVENT = (1<<13),
+ GPI_14_EVENT = (1<<14),
+ GPI_15_EVENT = (1<<15),
+};
+
+
+
+/*--------------------------------------------------------------------------*/
+/* Default used defines for GPIO PINs */
+/*--------------------------------------------------------------------------*/
+
+/*DEFAULT CONFIG FOR GPIO 0*/
+
+#if (DA9052_GPIO_PIN_0 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO0_FUNCTION INPUT
+#define DEFAULT_GPIO0_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO0_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 1*/
+#if (DA9052_GPIO_PIN_1 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO1_FUNCTION INPUT
+#define DEFAULT_GPIO1_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO1_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 2*/
+#if (DA9052_GPIO_PIN_2 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO2_FUNCTION INPUT
+#define DEFAULT_GPIO2_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO2_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 3*/
+#if (DA9052_GPIO_PIN_3 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO3_FUNCTION INPUT
+#define DEFAULT_GPIO3_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO3_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 4*/
+#if (DA9052_GPIO_PIN_4 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO4_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO4_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO4_MODE OUTPUT_LOWLEVEL
+#endif
+/*DEFAULT CONFIG FOR GPIO 5*/
+#if (DA9052_GPIO_PIN_5 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO5_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO5_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO5_MODE OUTPUT_LOWLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 6*/
+#if (DA9052_GPIO_PIN_6 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO6_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO6_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO6_MODE OUTPUT_LOWLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 7*/
+#if (DA9052_GPIO_PIN_7 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO7_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO7_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO7_MODE OUTPUT_LOWLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 8*/
+#if (DA9052_GPIO_PIN_8 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO8_FUNCTION INPUT
+#define DEFAULT_GPIO8_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO8_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 9*/
+#if (DA9052_GPIO_PIN_9 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO9_FUNCTION INPUT
+#define DEFAULT_GPIO9_TYPE ACTIVE_LOW
+#define DEFAULT_GPIO9_MODE DEBOUNCING_ON
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 10 - for RTC blinking LED */
+#if (DA9052_GPIO_PIN_10 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO10_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO10_TYPE SUPPLY_VDD_IO2
+#define DEFAULT_GPIO10_MODE OUTPUT_HIGHLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 11 - for RTC blinking LED */
+#if (DA9052_GPIO_PIN_11 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO11_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO11_TYPE SUPPLY_VDD_IO2
+#define DEFAULT_GPIO11_MODE OUTPUT_HIGHLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 12*/
+#if (DA9052_GPIO_PIN_12 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO12_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO12_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO12_MODE OUTPUT_LOWLEVEL
+#endif
+/*DEFAULT CONFIG FOR GPIO 13*/
+#if (DA9052_GPIO_PIN_13 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO13_FUNCTION OUTPUT_PUSHPULL
+#define DEFAULT_GPIO13_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO13_MODE OUTPUT_LOWLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 14 - for LED4 */
+#if (DA9052_GPIO_PIN_14 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO14_FUNCTION OUTPUT_OPENDRAIN
+#define DEFAULT_GPIO14_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO14_MODE OUTPUT_HIGHLEVEL
+#endif
+
+/*DEFAULT CONFIG FOR GPIO 15 - for LED5 */
+#if (DA9052_GPIO_PIN_15 == DA9052_GPIO_CONFIG)
+#define DEFAULT_GPIO15_FUNCTION OUTPUT_OPENDRAIN
+#define DEFAULT_GPIO15_TYPE SUPPLY_VDD_IO1
+#define DEFAULT_GPIO15_MODE OUTPUT_HIGHLEVEL
+#endif
+
+
+/* Maximum number of Gpio Ports */
+#define MAX_PORTNUMBER (16)
+
+/* Maximum number of ports per register */
+#define MAX_PORTS_PER_REGISTER (8)
+
+/* No of shift operations to performed */
+#define SHIFT_COUNT(no) ((no)%8)
+
+/* Mask of even numbered port */
+#define EVEN_PORT_FUNCTIONALITY (0x03)
+
+/* Mask of odd numbered port */
+#define ODD_PORT_FUNCTIONALITY (0x30)
+
+/* Mask Upper nibble */
+#define MASK_UPPER_NIBBLE (0xF0)
+
+/* Mask Lower nibble */
+#define MASK_LOWER_NIBBLE (0x0F)
+
+/* Nibble Shift */
+#define NIBBLE_SHIFT (4)
+
+/* Mode setting for Even Port number Write */
+#define EVEN_PORT_WRITE_MODE (1 << 3)
+
+/* Mode setting for ODD Port number Write */
+#define ODD_PORT_WRITE_MODE (1 << 7)
+/*--------------------------------------------------------------------------*/
+/* Global Variables */
+/*--------------------------------------------------------------------------*/
+
+
+/*--------------------------------------------------------------------------*/
+/* Structure Definitions */
+/*--------------------------------------------------------------------------*/
+
+/**
+ * struct da9052_gpio_read_write_t - Contains the i/p or o/p value for a GPIO
+ * @port_number: gpio ports
+ * @read_write_value: gpio value
+ *
+ */
+typedef struct {
+ u8 port_number:4;
+ u8 read_write_value:1;
+} da9052_gpio_read_write_t;
+
+/**
+ * struct da9052_gpio_multiple_read_t - Contains the signal level at each port
+ * @port_number: all gpio ports
+ *
+ */
+typedef struct {
+ u8 signal_value[16];
+} da9052_gpio_multiple_read_t;
+
+
+/**
+ * struct da9052_gpi_config_t - GPI configuration
+ * @type: GPI Type
+ * @mode: GPI mode
+ *
+ */
+typedef struct {
+ enum ip_type type;
+ enum ip_mode mode;
+} da9052_gpi_config_t;
+
+/**
+ * struct da9052_gpo_config_t - GPO configuration
+ * @type: GPO Type
+ * @mode: GPO mode
+ *
+ */
+typedef struct {
+ enum op_type type;
+ enum op_mode mode;
+} da9052_gpo_config_t;
+
+/**
+ * union da9052_gpio_config_t - GPIO configuration either input or output
+ * @input: GPI configuration
+ * @output: GPO configuration
+ *
+ */
+typedef union {
+ da9052_gpi_config_t input;
+ da9052_gpo_config_t output;
+} da9052_gpio_config_t;
+
+/**
+ * struct da9052_gpio_t - GPIO information
+ * @gpio_config: GPIO configuration either input or output
+ * @gpio_function: GPIO function
+ * @port_number: GPIO port number
+ *
+ */
+typedef struct {
+ da9052_gpio_config_t gpio_config;
+ enum ip_op_type gpio_function;
+ u8 port_number:4;
+} da9052_gpio_t;
+
+/**
+ * struct da9052_gpio_chip_t - GPIO information
+ * @gpio: GPIO Information
+ * @gp: GPIO Chip Information
+ */
+typedef struct {
+ da9052_gpio_t gpio;
+ da9052_gpio_read_write_t read_write;
+ struct gpio_chip gp;
+} da9052_gpio_chip_t;
+
+/*--------------------------------------------------------------------------*/
+/* Global Variables */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Inline Functions */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* External Functions */
+/*--------------------------------------------------------------------------*/
+
+/*--------------------------------------------------------------------------*/
+/* Other Functions */
+/*--------------------------------------------------------------------------*/
+s32 da9052_gpio_read_port(da9052_gpio_read_write_t *read_port);
+s32 da9052_gpio_multiple_read(da9052_gpio_multiple_read_t *multiple_port);
+s32 da9052_gpio_write_port(da9052_gpio_read_write_t *write_port);
+s32 da9052_gpio_configure_port(da9052_gpio_t *gpio_data);
+s32 da9052_gpio_register_event(u8 event_type);
+s32 da9052_gpio_unregister_event(u8 event_type);
+
+#endif /* _DA9052_GPIO_H */
Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information,
some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it
is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists