lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <31752.10.24.255.17.1274441750.squirrel@dbdmail.itg.ti.com>
Date:	Fri, 21 May 2010 17:05:50 +0530 (IST)
From:	"Hemanth V" <hemanthv@...com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-omap@...r.kernel.org, linux-input@...r.kernel.org
Subject: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver

From: Hemanth V <hemanthv@...com>
Date: Fri, 21 May 2010 15:52:03 +0530
Subject: [PATCH] misc: ROHM BH1780GLI Ambient light sensor Driver

Corrected the mailing list, should be linux-kernel

This patch adds support for ROHM BH1780GLI Ambient light sensor.

BH1780 supports I2C interface. Driver supports read/update of power state and
read of lux value (through SYSFS). Writing value 3 to power_state enables the
sensor and current lux value could be read.

Signed-off-by: Hemanth V <hemanthv@...com>
---
 drivers/misc/Kconfig     |   11 ++
 drivers/misc/Makefile    |    1 +
 drivers/misc/bh1780gli.c |  278 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 290 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/bh1780gli.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0d0d625..0687a0c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -278,6 +278,17 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.

+config SENSORS_BH1780
+	tristate "ROHM BH1780GLI ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the ROHM BH1780GLI
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called bh1780gli.
+
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7b6f7ee..c479d91 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-y				+= eeprom/
 obj-y				+= cb710/
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
+obj-$(CONFIG_SENSORS_BH1780)	+= bh1780gli.o
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
new file mode 100644
index 0000000..9b4137d
--- /dev/null
+++ b/drivers/misc/bh1780gli.c
@@ -0,0 +1,278 @@
+/*
+ * bh1780gli.c
+ * ROHM Ambient Light Sensor Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define BH1780_REG_CONTROL     0x80
+#define BH1780_REG_PARTID      0x8A
+#define BH1780_REG_MANFID      0x8B
+#define BH1780_REG_DLOW        0x8C
+#define BH1780_REG_DHIGH       0x8D
+
+#define BH1780_REVMASK        (0xf)
+#define BH1780_POWMASK        (0x3)
+#define BH1780_POFF	      (0x0)
+#define BH1780_PON            (0x3)
+
+/* power on settling time in ms */
+#define BH1780_PON_DELAY      2
+
+struct bh1780_data {
+	struct i2c_client *client;
+	int power_state;
+	/* lock for sysfs operations */
+	struct mutex lock;
+};
+
+int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
+{
+	int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
+	if (ret < 0)
+		dev_err(&ddata->client->dev,
+			"i2c_smbus_write_byte_data failed error %d\
+			Register (%s)\n", ret, msg);
+	return ret;
+}
+
+int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
+{
+	int ret = i2c_smbus_read_byte_data(ddata->client, reg);
+	if (ret < 0)
+		dev_err(&ddata->client->dev,
+			"i2c_smbus_read_byte_data failed error %d\
+			 Register (%s)\n", ret, msg);
+	return ret;
+}
+
+static ssize_t bh1780_show_lux(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	int lsb, msb;
+
+	lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
+	if (lsb < 0)
+		return lsb;
+
+	msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
+	if (msb < 0)
+		return msb;
+
+	return sprintf(buf, "%d\n", (msb << 8) | lsb);
+}
+
+static ssize_t bh1780_show_power_state(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	int state;
+
+	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+	if (state < 0)
+		return state;
+
+	return sprintf(buf, "%d\n", state & BH1780_POWMASK);
+}
+
+static ssize_t bh1780_store_power_state(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 0, &val);
+	if (error)
+		return error;
+
+	if (val < BH1780_POFF || val > BH1780_PON)
+		return -EINVAL;
+
+	mutex_lock(&ddata->lock);
+
+	error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
+	if (error < 0) {
+		mutex_unlock(&ddata->lock);
+		return error;
+	}
+
+	msleep(BH1780_PON_DELAY);
+	ddata->power_state = val;
+	mutex_unlock(&ddata->lock);
+	return count;
+
+}
+
+static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+		bh1780_show_power_state, bh1780_store_power_state);
+
+static struct attribute *bh1780_attributes[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_lux.attr,
+	NULL
+};
+
+static const struct attribute_group bh1780_attr_group = {
+	.attrs = bh1780_attributes,
+};
+
+static int __devinit bh1780_probe(struct i2c_client *client,
+						const struct i2c_device_id *id)
+{
+	int ret;
+	struct bh1780_data *ddata = NULL;
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+		ret = -EIO;
+		goto err_op_failed;
+	}
+
+	ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
+	if (ddata == NULL) {
+		ret = -ENOMEM;
+		goto err_op_failed;
+	}
+
+	ddata->client = client;
+	i2c_set_clientdata(client, ddata);
+
+	ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
+	if (ret < 0)
+		goto err_op_failed;
+
+	dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
+			(ret & BH1780_REVMASK));
+
+	mutex_init(&ddata->lock);
+
+	ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
+	if (ret)
+		goto err_op_failed;
+
+	return 0;
+
+err_op_failed:
+	if (ddata != NULL)
+		kfree(ddata);
+
+	return ret;
+}
+
+static int __devexit bh1780_remove(struct i2c_client *client)
+{
+	struct bh1780_data *ddata;
+
+	ddata = i2c_get_clientdata(client);
+	sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
+
+	if (ddata != NULL) {
+		i2c_set_clientdata(client, NULL);
+		kfree(ddata);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct bh1780_data *ddata;
+	int state, ret;
+
+	ddata = i2c_get_clientdata(client);
+	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+	if (state < 0)
+		return state;
+
+	ddata->power_state = state & BH1780_POWMASK;
+
+	ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
+				"CONTROL");
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int bh1780_resume(struct i2c_client *client)
+{
+	struct bh1780_data *ddata;
+	int state, ret;
+
+	ddata = i2c_get_clientdata(client);
+	state = ddata->power_state;
+
+	ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
+				"CONTROL");
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#endif
+
+static const struct i2c_device_id bh1780_id[] = {
+	{ "bh1780", 0 },
+	{ },
+};
+
+static struct i2c_driver bh1780_driver = {
+	.probe		= bh1780_probe,
+	.remove		= bh1780_remove,
+	.id_table	= bh1780_id,
+#ifdef CONFIG_PM
+	.suspend	= bh1780_suspend,
+	.resume		= bh1780_resume,
+#endif
+	.driver = {
+		.name = "bh1780"
+	},
+};
+
+static int __init bh1780_init(void)
+{
+	return i2c_add_driver(&bh1780_driver);
+}
+
+static void __exit bh1780_exit(void)
+{
+	i2c_del_driver(&bh1780_driver);
+}
+
+module_init(bh1780_init)
+module_exit(bh1780_exit)
+
+MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@...com>");
-- 
1.5.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ