| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100521171629.GI30053@atomide.com>
Date: Fri, 21 May 2010 10:16:30 -0700
From: Tony Lindgren <tony@...mide.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [GIT PULL] omap updates for 2.6.35
Hi Linus,
Please pull omap updates from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
Regards,
Tony
The following changes since commit 20c9d2c4ab8243a1c311248232954b2c1da3ba75:
i2c-omap: add mpu wake up latency constraint in i2c (2010-05-20 00:18:59 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
Abraham Arce (2):
OMAP4: Ethernet: KS8851 Board Support
OMAP4: Networking: Defconfig Support
Ajay Kumar Gupta (1):
AM35x: fix UI card EHCI port and LCD dependency
Anand Gadiyar (1):
omap3: update omap3_defconfig
Ari Kauppi (1):
OMAP3: PM: Add milliseconds interface to suspend wakeup timer
Balaji T K (2):
omap4: add i2c1 peripherals data
omap4: Enable RTC and regulator support
Benoit Cousson (13):
OMAP4: hwmod: Replace module & device offsets by absolute clkctrl address
OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h
OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function
OMAP4: hwmod: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST
OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
OMAP: hwmod: Do not exit the iteration if one clock init failed
OMAP: hwmod: Rename hwmod name for the MPU
OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
OMAP4: CM: Remove non-functional registers in ES1.0
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
OMAP4: PRCM: Remove duplicate definition of base addresses
Charulatha V (1):
omap: GPIO: Fix OMAP4 GPIO reg access issues
Chunqiu Wang (1):
OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs
Felipe Balbi (1):
OMAP1 clock: fix section mismatch on clk_init
Hiroshi DOYU (5):
omap iommu: Introduce iteration macro for iotlb entry scan
omap iommu: Make CONFIG_OMAP_IOMMU_DEBUG selectable
omap iommu: Insert a gap page between IOVMAs against override
omap iommu: Exit iteration if no possibility of available area
omap iommu: Reject unaligned addresses at setting page table entry
Janusz Krzysztofik (8):
omap: add missing FIQ_START definition required forarch/arm/kernel/fiq.c compilation
OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt processing
OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine
OMAP1: Amstrad Delta: update board initialization code forcomplete modem IRQ GPIO line setup
OMAP1: Amstrad Delta: use FIQ for processing GPIO interrupts
input: serio: add support for Amstrad Delta serial keyboardport
omap1: amsdelta: defconfig updates
OMAP1: Amstrad Delta: modify defconfig for external keyboardsupport
Jarkko Nikula (3):
omap: rx51: Change the TWL4030 VMMC2 voltage constraints andsupply name
omap: rx51: Add i2c2 board_info with tlv320aic3x
omap: rx51: Add supplies for the tlv320aic3x codec driver
Jason (1):
omap3: Add support for OMAP3Stalker boards
Jason Lam (1):
omap3: Add OMAP3 Stalker board LK-S defconfig
Kanigeri, Hari (4):
omap iommu: renamed omap3-iommu to omap-iommu
omap iommu: support for OMAP4
omap iommu: missing check for TLB valid entry
omap iommu: add TLB preservation support
Kevin Hilman (4):
OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs
OMAP2/3: GPIO: generalize prepare for idle
OMAP3: GPIO: disable GPIO debounce clocks on idle
OMAP: GPIO: remove duplicate debugfs interface
Laine Walker-Avina (1):
OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
Mika Westerberg (1):
OMAP2/3/4: DMA: disable channel interrupts in omap_init_dma()
Mike Chan (2):
OMAP3: PM: Enable IO / IO-CHAIN wakeups for PER
OMAP3: PM: Remove PER wakeup dependency on CORE.
Paul Walmsley (11):
OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes
OMAP3: PM: PM_MPUGRPSEL writes should use GRPSEL macros, not EN macros
OMAP2+ clock: remove DEFAULT_RATE clksel_rate flag
OMAP2+ clock: clean up clkt_clksel.c
OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality
OMAP3 clock: remove unnecessary duplicate of dpll4_m2_ck, added for 36xx
OMAP clock: resolve old checkpatch and CodingStyle issues with plat-omap/clock.c
OMAP powerdomain, hwmod, omap_device: add some credits
OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
Rajendra Nayak (6):
OMAP4: PRCM: Add offset defines for all PRM registers
OMAP4: PRCM: Add offset defines for all CM registers
OMAP4 clock: Support clk_set_parent
OMAP: timers: Fix clock source names for OMAP4
OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
Ranjith Lohithakshan (2):
OMAP3EVM: Update pad configuration for wakeup enabled pads
OMAP3: PM: Enable wakeup from ads7846 touchscreen
Roger Quadros (1):
OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
Santosh Shilimkar (2):
omap4: Move SOC specific code from board file
omap4: Add i2c board support on omap4430 sdp platform
Sriram (6):
can: ti_hecc: board specific hookup on AM3517EVM
can: ti_hecc: Enable CAN support on AM3517
AM35xx EMAC: define submodule offsets
AM35xx: Platform specific hookup for EMAC module
OMAP3: clock data: Update name string for EMAC clocks
AM3517: defconfig update to enable EMAC support
Steve Sakoman (1):
omap: Overo: Add support for second ethernet port
Syed Rafiuddin (1):
OMAP4: SPI: Fix Driver Kconfig
Tero Kristo (2):
OMAP3: GPIO fixes for off-mode
OMAP3: GPIO: Removed a couple of unneeded registers from context save/restore
Thomas Weber (2):
omap: Devkit8000: Add mux initialization
omap: Devkit8000: Update default configuration
Tony Lindgren (20):
omap2/3/4: Fix multi.h when omap3 and omap4 are selected without omap2
omap: Use a memory address for storing the debug port info instead of UART1 scratchpad
omap2/3: Fix DEBUG_LL for omap zoom2/3
omap3: Fix compile for board-cm-t35
omap3: Remove non-muxable ball entries for 3630
omap4: Fix multiboot with CONFIG_PM and CONFIG_ARCH_OMAP3 selected
omap2/3/4: Add new boards to omap3_defconfig
omap2/3/4: Make omap3_defconfig usable on Nokia boards
omap2/3/4: Update PMIC options for TWL and Menelaus chips
omap2/3/4: Disable CONFIG_PM_VERBOSE in omap3_defconfig
omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig
Merge branch 'omap-boards' into omap-for-linus
Merge branch 'gpio-2.6.35' of git://git.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
Merge branch 'pm-next' of git://git.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
Merge branch 'v2.6.34-rc7.iommu' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus
omap3: Add stalker board to omap3_defconfig
Merge branch 'for_2.6.35' of git://git.pwsan.com/linux-2.6 into omap-for-linus
omap: Fix i2c platform init code for omap4
omap4: Add support for i2c init
Merge branch 'omap4-i2c-init' into omap-for-linus
Vaibhav Hiremath (1):
OMAP2/3: Add V4L2 DSS driver support in device.c
Viral Mehta (3):
omap2: Add I2C bus 1 initialisation for 2430sdp
omap2: Add OHCI USB platform init for 2430 SDP
omap2: select ARCH_OMAP_OTG for OMAP2430 SDP
kishore kadiyala (4):
omap4: Adds Dummy Interface clock's for MMC controllers
omap4: Adding hsmmc support to board file
omap4: Adding PBIAS Configuration for MMC1 Controller
omap4: Enable HSMMC support
manjugk manjugk (1):
omap: DMA: Fix multi-line comments
stanley.miao (3):
omap: init the gpio pinmux for mmc
omap: hsmmc: fix the hsmmc driver for am3517
AM3517: rename the i2c boardinfo to make it more readable
arch/arm/configs/am3517_evm_defconfig | 92 ++-
arch/arm/configs/ams_delta_defconfig | 10 +-
arch/arm/configs/devkit8000_defconfig | 157 ++-
arch/arm/configs/omap3_defconfig | 151 ++-
arch/arm/configs/omap3_stalker_lks_defconfig | 1691 ++++++++++++++++++++++
arch/arm/configs/omap_4430sdp_defconfig | 448 ++++++-
arch/arm/mach-omap1/Kconfig | 10 +
arch/arm/mach-omap1/Makefile | 1 +
arch/arm/mach-omap1/ams-delta-fiq-handler.S | 278 ++++
arch/arm/mach-omap1/ams-delta-fiq.c | 155 ++
arch/arm/mach-omap1/board-ams-delta.c | 18 +-
arch/arm/mach-omap1/clock.c | 2 +-
arch/arm/mach-omap1/clock.h | 2 +-
arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 79 +
arch/arm/mach-omap1/include/mach/debug-macro.S | 21 +-
arch/arm/mach-omap2/Kconfig | 7 +
arch/arm/mach-omap2/Makefile | 12 +-
arch/arm/mach-omap2/board-2430sdp.c | 21 +-
arch/arm/mach-omap2/board-3430sdp.c | 1 +
arch/arm/mach-omap2/board-4430sdp.c | 360 ++++-
arch/arm/mach-omap2/board-am3517evm.c | 166 ++-
arch/arm/mach-omap2/board-cm-t35.c | 1 +
arch/arm/mach-omap2/board-devkit8000.c | 155 ++
arch/arm/mach-omap2/board-omap3evm.c | 6 +-
arch/arm/mach-omap2/board-omap3stalker.c | 672 +++++++++
arch/arm/mach-omap2/board-overo.c | 14 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 92 +-
arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +-
arch/arm/mach-omap2/board-zoom2.c | 4 +-
arch/arm/mach-omap2/board-zoom3.c | 4 +-
arch/arm/mach-omap2/clkt2xxx_apll.c | 4 +-
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 17 +-
arch/arm/mach-omap2/clkt_clksel.c | 472 ++++---
arch/arm/mach-omap2/clock.c | 9 +
arch/arm/mach-omap2/clock.h | 11 +-
arch/arm/mach-omap2/clock2420_data.c | 50 +-
arch/arm/mach-omap2/clock2430_data.c | 54 +-
arch/arm/mach-omap2/clock3xxx_data.c | 412 +++----
arch/arm/mach-omap2/clock44xx_data.c | 5 +
arch/arm/mach-omap2/clock_common_data.c | 12 +-
arch/arm/mach-omap2/clockdomain.c | 4 +-
arch/arm/mach-omap2/clockdomains44xx.h | 4 +-
arch/arm/mach-omap2/cm-regbits-24xx.h | 236 ++--
arch/arm/mach-omap2/cm-regbits-34xx.h | 222 ++--
arch/arm/mach-omap2/cm.c | 3 -
arch/arm/mach-omap2/cm.h | 16 +-
arch/arm/mach-omap2/cm44xx.h | 301 ++++-
arch/arm/mach-omap2/cm4xxx.c | 54 +-
arch/arm/mach-omap2/control.c | 7 +-
arch/arm/mach-omap2/devices.c | 37 +
arch/arm/mach-omap2/hsmmc.c | 120 ++-
arch/arm/mach-omap2/include/mach/am35xx.h | 20 +-
arch/arm/mach-omap2/include/mach/debug-macro.S | 15 +-
arch/arm/mach-omap2/include/mach/omap4-common.h | 26 +
arch/arm/mach-omap2/io.c | 9 +
arch/arm/mach-omap2/iommu2.c | 6 +-
arch/arm/mach-omap2/mux34xx.c | 86 --
arch/arm/mach-omap2/omap-iommu.c | 157 ++
arch/arm/mach-omap2/omap-smp.c | 2 +-
arch/arm/mach-omap2/omap3-iommu.c | 105 --
arch/arm/mach-omap2/omap4-common.c | 72 +
arch/arm/mach-omap2/omap_hwmod.c | 121 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/pm-debug.c | 3 +
arch/arm/mach-omap2/pm.h | 1 +
arch/arm/mach-omap2/pm24xx.c | 130 +-
arch/arm/mach-omap2/pm34xx.c | 259 ++--
arch/arm/mach-omap2/powerdomain.c | 56 +-
arch/arm/mach-omap2/powerdomains44xx.h | 23 +-
arch/arm/mach-omap2/prcm-common.h | 164 +--
arch/arm/mach-omap2/prcm.c | 4 +-
arch/arm/mach-omap2/prm-regbits-24xx.h | 120 +-
arch/arm/mach-omap2/prm-regbits-34xx.h | 360 +++---
arch/arm/mach-omap2/prm.h | 22 +-
arch/arm/mach-omap2/prm44xx.h | 389 +++++-
arch/arm/plat-omap/Kconfig | 9 +-
arch/arm/plat-omap/clock.c | 25 +-
arch/arm/plat-omap/common.c | 3 -
arch/arm/plat-omap/dma.c | 45 +-
arch/arm/plat-omap/dmtimer.c | 4 +-
arch/arm/plat-omap/gpio.c | 236 ++--
arch/arm/plat-omap/i2c.c | 98 +-
arch/arm/plat-omap/include/plat/clock.h | 14 +-
arch/arm/plat-omap/include/plat/common.h | 3 -
arch/arm/plat-omap/include/plat/control.h | 20 +
arch/arm/plat-omap/include/plat/gpio.h | 4 +-
arch/arm/plat-omap/include/plat/irqs.h | 4 +
arch/arm/plat-omap/include/plat/mmc.h | 4 +
arch/arm/plat-omap/include/plat/multi.h | 16 +-
arch/arm/plat-omap/include/plat/omap44xx.h | 4 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 16 +-
arch/arm/plat-omap/include/plat/powerdomain.h | 7 +
arch/arm/plat-omap/include/plat/serial.h | 16 +-
arch/arm/plat-omap/include/plat/uncompress.h | 44 +-
arch/arm/plat-omap/iommu.c | 101 +-
arch/arm/plat-omap/iovmm.c | 9 +-
arch/arm/plat-omap/omap_device.c | 4 +-
arch/arm/plat-omap/sram.c | 16 +-
drivers/input/serio/Kconfig | 16 +
drivers/input/serio/Makefile | 1 +
drivers/input/serio/ams_delta_serio.c | 177 +++
drivers/spi/Kconfig | 6 +-
104 files changed, 7514 insertions(+), 2226 deletions(-)
create mode 100644 arch/arm/configs/omap3_stalker_lks_defconfig
create mode 100644 arch/arm/mach-omap1/ams-delta-fiq-handler.S
create mode 100644 arch/arm/mach-omap1/ams-delta-fiq.c
create mode 100644 arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
create mode 100644 arch/arm/mach-omap2/board-omap3stalker.c
create mode 100644 arch/arm/mach-omap2/include/mach/omap4-common.h
create mode 100644 arch/arm/mach-omap2/omap-iommu.c
delete mode 100644 arch/arm/mach-omap2/omap3-iommu.c
create mode 100644 arch/arm/mach-omap2/omap4-common.c
create mode 100644 drivers/input/serio/ams_delta_serio.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists