| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201005251453.06111.trenn@suse.de>
Date: Tue, 25 May 2010 14:53:05 +0200
From: Thomas Renninger <trenn@...e.de>
To: mingo@...e.hu
Cc: arjan@...radead.org, linux-kernel@...r.kernel.org,
robert.schoene@...dresden.de, cpufreq@...r.kernel.org,
linux-perf-users@...r.kernel.org,
linux-trace-users@...r.kernel.org, x86@...nel.org,
akpm@...ux-foundation.org
Subject: Re: [PATCH] x86 cpufreq: Make trace_power_frequency cpufreq driver independent
Hi Ingo,
this is in fact a resend. First version was sent on 2010-04-30.
Your comment was:
----
Timechart is maintained by Arjan so we need an ack from him as well.
I've seen some back and forth in the discussions -
what's the technical resolution of that?
----
There was enough time for people to argue on this.
The technical resolution is the patch below.
Can this still be seen in 2.6.34 or does this need x86-tip/linux-next
queuing already (which would be bad...).
This is in 11.3/master OpenSUSE branch kernel for some weeks already.
The checkpatch violation is intended to match the indentation of:
include/trace/events/power.h
Thanks,
Thomas
On Tuesday 25 May 2010 14:39:59 Thomas Renninger wrote:
> and fix the broken case if a core's frequency depends on others.
>
> trace_power_frequency was only implemented in a rather ungeneric way
> in acpi-cpufreq driver's target() function only.
> -> Move the call to trace_power_frequency to
> cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
> notifier is triggered.
> This will support power frequency tracing by all cpufreq drivers
>
> trace_power_frequency did not trace frequency changes correctly when
> the userspace governor was used or when CPU cores' frequency depend
> on each other.
> -> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
> which gets switched automatically fixes this.
>
> Robert Schoene provided some important fixes on top of my initial
> quick shot version which are integrated in this patch:
> - Forgot some changes in power_end trace (TP_printk/variable names)
> - Variable dummy in power_end must now be cpu_id
> - Use static 64 bit variable instead of unsigned int for cpu_id
>
> Signed-off-by: Thomas Renninger <trenn@...e.de>
> CC: davej@...hat.com
> CC: arjan@...radead.org
> CC: linux-kernel@...r.kernel.org
> CC: robert.schoene@...dresden.de
> CC: cpufreq@...r.kernel.org
> Tested-by: robert.schoene@...dresden.de
> CC: linux-perf-users@...r.kernel.org
> CC: linux-trace-users@...r.kernel.org
> CC: x86@...nel.org
> CC: akpm@...ux-foundation.org
> ---
> arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 3 ---
> arch/x86/kernel/process.c | 8 ++++----
> drivers/cpufreq/cpufreq.c | 3 +++
> drivers/cpuidle/cpuidle.c | 2 +-
> include/trace/events/power.h | 27
+++++++++++++++------------
> tools/perf/builtin-timechart.c | 11 ++++++-----
> 6 files changed, 29 insertions(+), 25 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> index 1d3cdda..cee5263 100644
> --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> @@ -34,7 +34,6 @@
> #include <linux/compiler.h>
> #include <linux/dmi.h>
> #include <linux/slab.h>
> -#include <trace/events/power.h>
>
> #include <linux/acpi.h>
> #include <linux/io.h>
> @@ -324,8 +323,6 @@ static int acpi_cpufreq_target(struct
cpufreq_policy *policy,
> }
> }
>
> - trace_power_frequency(POWER_PSTATE, data-
>freq_table[next_state].frequency);
> -
> switch (data->cpu_feature) {
> case SYSTEM_INTEL_MSR_CAPABLE:
> cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
> diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
> index e7e3521..787572d 100644
> --- a/arch/x86/kernel/process.c
> +++ b/arch/x86/kernel/process.c
> @@ -371,7 +371,7 @@ static inline int hlt_use_halt(void)
> void default_idle(void)
> {
> if (hlt_use_halt()) {
> - trace_power_start(POWER_CSTATE, 1);
> + trace_power_start(POWER_CSTATE, 1, smp_processor_id());
> current_thread_info()->status &= ~TS_POLLING;
> /*
> * TS_POLLING-cleared state must be visible before we
> @@ -441,7 +441,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
> */
> void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
> {
> - trace_power_start(POWER_CSTATE, (ax>>4)+1);
> + trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id());
> if (!need_resched()) {
> if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
> clflush((void *)¤t_thread_info()->flags);
> @@ -457,7 +457,7 @@ void mwait_idle_with_hints(unsigned long ax,
unsigned long cx)
> static void mwait_idle(void)
> {
> if (!need_resched()) {
> - trace_power_start(POWER_CSTATE, 1);
> + trace_power_start(POWER_CSTATE, 1, smp_processor_id());
> if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
> clflush((void *)¤t_thread_info()->flags);
>
> @@ -478,7 +478,7 @@ static void mwait_idle(void)
> */
> static void poll_idle(void)
> {
> - trace_power_start(POWER_CSTATE, 0);
> + trace_power_start(POWER_CSTATE, 0, smp_processor_id());
> local_irq_enable();
> while (!need_resched())
> cpu_relax();
> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> index 063b218..4ed6657 100644
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -29,6 +29,8 @@
> #include <linux/completion.h>
> #include <linux/mutex.h>
>
> +#include <trace/events/power.h>
> +
> #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
> "cpufreq-core", msg)
>
> @@ -354,6 +356,7 @@ void cpufreq_notify_transition(struct
cpufreq_freqs *freqs, unsigned int state)
>
> case CPUFREQ_POSTCHANGE:
> adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
> + trace_power_frequency(POWER_PSTATE, freqs->new,
freqs->cpu);
> srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
> CPUFREQ_POSTCHANGE, freqs);
> if (likely(policy) && likely(policy->cpu == freqs->cpu))
> diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
> index 12fdd39..c672f4a 100644
> --- a/drivers/cpuidle/cpuidle.c
> +++ b/drivers/cpuidle/cpuidle.c
> @@ -95,7 +95,7 @@ static void cpuidle_idle_call(void)
> /* give the governor an opportunity to reflect on the outcome */
> if (cpuidle_curr_governor->reflect)
> cpuidle_curr_governor->reflect(dev);
> - trace_power_end(0);
> + trace_power_end(smp_processor_id());
> }
>
> /**
> diff --git a/include/trace/events/power.h
b/include/trace/events/power.h
> index c4efe9b..35a2a6e 100644
> --- a/include/trace/events/power.h
> +++ b/include/trace/events/power.h
> @@ -18,52 +18,55 @@ enum {
>
> DECLARE_EVENT_CLASS(power,
>
> - TP_PROTO(unsigned int type, unsigned int state),
> + TP_PROTO(unsigned int type, unsigned int state, unsigned int
cpu_id),
>
> - TP_ARGS(type, state),
> + TP_ARGS(type, state, cpu_id),
>
> TP_STRUCT__entry(
> __field( u64, type )
> __field( u64, state )
> + __field( u64, cpu_id )
> ),
>
> TP_fast_assign(
> __entry->type = type;
> __entry->state = state;
> + __entry->cpu_id = cpu_id;
> ),
>
> - TP_printk("type=%lu state=%lu", (unsigned long)__entry->type,
(unsigned long)__entry->state)
> + TP_printk("type=%lu state=%lu cpu_id=%lu", (unsigned long)__entry-
>type,
> + (unsigned long)__entry->state, (unsigned long)__entry-
>cpu_id)
> );
>
> DEFINE_EVENT(power, power_start,
>
> - TP_PROTO(unsigned int type, unsigned int state),
> + TP_PROTO(unsigned int type, unsigned int state, unsigned int
cpu_id),
>
> - TP_ARGS(type, state)
> + TP_ARGS(type, state, cpu_id)
> );
>
> DEFINE_EVENT(power, power_frequency,
>
> - TP_PROTO(unsigned int type, unsigned int state),
> + TP_PROTO(unsigned int type, unsigned int state, unsigned int
cpu_id),
>
> - TP_ARGS(type, state)
> + TP_ARGS(type, state, cpu_id)
> );
>
> TRACE_EVENT(power_end,
>
> - TP_PROTO(int dummy),
> + TP_PROTO(unsigned int cpu_id),
>
> - TP_ARGS(dummy),
> + TP_ARGS(cpu_id),
>
> TP_STRUCT__entry(
> - __field( u64, dummy )
> + __field( u64, cpu_id )
> ),
>
> TP_fast_assign(
> - __entry->dummy = 0xffff;
> + __entry->cpu_id = cpu_id;
> ),
>
> - TP_printk("dummy=%lu", (unsigned long)__entry->dummy)
> + TP_printk("cpu_id=%lu", (unsigned long)__entry->cpu_id)
>
> );
>
> diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-
timechart.c
> index 5a52ed9..5161619 100644
> --- a/tools/perf/builtin-timechart.c
> +++ b/tools/perf/builtin-timechart.c
> @@ -300,8 +300,9 @@ struct trace_entry {
>
> struct power_entry {
> struct trace_entry te;
> - s64 type;
> - s64 value;
> + u64 type;
> + u64 value;
> + u64 cpu_id;
> };
>
> #define TASK_COMM_LEN 16
> @@ -498,13 +499,13 @@ static int process_sample_event(event_t *event,
struct perf_session *session)
> return 0;
>
> if (strcmp(event_str, "power:power_start") == 0)
> - c_state_start(data.cpu, data.time, pe->value);
> + c_state_start(pe->cpu_id, data.time, pe->value);
>
> if (strcmp(event_str, "power:power_end") == 0)
> - c_state_end(data.cpu, data.time);
> + c_state_end(pe->cpu_id, data.time);
>
> if (strcmp(event_str, "power:power_frequency") == 0)
> - p_state_change(data.cpu, data.time, pe->value);
> + p_state_change(pe->cpu_id, data.time, pe->value);
>
> if (strcmp(event_str, "sched:sched_wakeup") == 0)
> sched_wakeup(data.cpu, data.time, data.pid, te);
> --
> 1.6.3
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists