Initializing cgroup subsys cpuset Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Wed Oct 14 09:28:59 EDT 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffe0000 (usable) BIOS-e820: 00000000cffe0000 - 00000000cffe3000 (ACPI NVS) BIOS-e820: 00000000cffe3000 - 00000000cfff0000 (ACPI data) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Warning only 4GB will be used. Use a HIGHMEM64G enabled kernel. 3264MB HIGHMEM available. 832MB LOWMEM available. found SMP MP-table at [c00f4f40] 000f4f40 Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 212992 HighMem 212992 -> 1048576 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1632 pages used for memmap Normal zone: 207264 pages, LIFO batch:31 HighMem zone: 6528 pages used for memmap HighMem zone: 829056 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.5 present. ACPI: RSDP 000F8FA0, 0024 (r2 RD790 ) ACPI: RSDT CFFE3000, 0034 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: FACP CFFE3080, 0074 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: DSDT CFFE3100, 86E1 (r1 RD790 AWRDACPI 1000 MSFT 3000000) ACPI: FACS CFFE0000, 0040 ACPI: HPET CFFEB8C0, 0038 (r1 RD790 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG CFFEB900, 003C (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: APIC CFFEB800, 0084 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ATI board detected. Disabling timer routing over 8254. SB700 rev 0x3a or lower detected! ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 38788 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 Kernel command line: root=/dev/disk/by-id/ata-ST3120827AS_4MS1MCBH-part5 splash=silent noresume bigphysarea=0x4000 vmalloc=192M apm=off motr vrsx vga=0x31a mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3400.267 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3298804k/4194304k available (1761k kernel code, 107900k reserved, 734k data, 216k init, 2555776k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB) lowmem : 0xc0000000 - 0xf4000000 ( 832 MB) .init : 0xc0375000 - 0xc03ab000 ( 216 kB) .data : 0xc02b8532 - 0xc036fecc ( 734 kB) .text : 0xc0100000 - 0xc02b8532 (1761 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 6805.29 BogoMIPS (lpj=3402647) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(4) -> Core 0 Checking 'hlt' instruction... OK. ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 1/1 ip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6801.42 BogoMIPS (lpj=3400714) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(4) -> Core 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 2/2 ip 2000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6801.43 BogoMIPS (lpj=3400717) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2(4) -> Core 3 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 3/3 ip 2000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6801.43 BogoMIPS (lpj=3400717) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3(4) -> Core 2 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom(tm) II X4 965 Processor stepping 02 Brought up 4 CPUs Total of 4 processors activated (27209.59 BogoMIPS). net_namespace: 660 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:11.0: set SATA to AHCI mode PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0c: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: Cannot allocate resource region 3 of device 0000:00:00.0 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 system 00:01: ioport range 0x4100-0x411f has been reserved system 00:01: ioport range 0x228-0x22f has been reserved system 00:01: ioport range 0x40b-0x40b has been reserved system 00:01: ioport range 0x4d6-0x4d6 has been reserved system 00:01: ioport range 0xc00-0xc01 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6d has been reserved system 00:01: ioport range 0xc6f-0xc6f has been reserved system 00:01: ioport range 0xcd0-0xcd1 has been reserved system 00:01: ioport range 0xcd2-0xcd3 has been reserved system 00:01: ioport range 0xcd4-0xcdf has been reserved system 00:01: ioport range 0x4000-0x40fe has been reserved system 00:01: ioport range 0x4210-0x4217 has been reserved system 00:01: ioport range 0xb10-0xb1f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x220-0x225 has been reserved system 00:0c: iomem range 0xf0000-0xfffff could not be reserved system 00:0c: iomem range 0x0-0x1fffff could not be reserved system 00:0c: iomem range 0xcffe0000-0xcfffffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0xcffdffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: b000-bfff MEM window: 0xf7000000-0xf9ffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:02:00.0 IO window: a000-afff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff PCI: Bridge: 0000:00:04.0 IO window: a000-afff MEM window: 0xfdd00000-0xfdefffff PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff PCI: Bridge: 0000:00:09.0 IO window: e000-efff MEM window: 0xfdb00000-0xfdbfffff PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff PCI: Bridge: 0000:07:0c.0 IO window: c000-cfff MEM window: 0xfc800000-0xfd3fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:06:04.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:05:00.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:00:0b.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:00:14.4 IO window: 9000-9fff MEM window: 0xfda00000-0xfdafffff PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 5495k freed audit: initializing netlink socket (disabled) type=2000 audit(1274881740.493:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 bigphysarea: Allocated 16384 pages at 0xc3038000. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1463 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xf4880000, using 5120k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:d4f0 vesafb: pmi: set display start = c00cd526, set palette = c00cd590 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 Using IPI No-Shortcut mode Freeing unused kernel memory: 216k freed ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: Expecting a [Reference] package element, found type 0 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (28 C) No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: softreset failed (device not ready) ata3: failed due to HW bug, retry pmp=0 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 ata5.00: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.01: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata5.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/100 ata5.01: configured for UDMA/100 ata6.00: ATA-7: ST3250620A, 3.AAD, max UDMA/100 ata6.00: 488397168 sectors, multi 16: LBA48 ata6.01: ATAPI: SONY DVD RW DRU-180A, 1.60, max UDMA/66 ata6.00: configured for UDMA/100 ata6.01: configured for UDMA/66 scsi 4:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 4:0:1:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 5:0:0:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 scsi 5:0:1:0: CD-ROM SONY DVD RW DRU-180A 1.60 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi6 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs scsi 6:0:0:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2 target6:0:0: asynchronous scsi6:A:0:0: Tagged Queuing enabled. Depth 32 target6:0:0: Beginning Domain Validation target6:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target6:0:0: Domain Validation skipping write tests target6:0:0: Ending Domain Validation scsi 6:0:1:0: Direct-Access IMPRIMIS 94601-15 4614 PQ: 0 ANSI: 1 CCS target6:0:1: asynchronous target6:0:1: Beginning Domain Validation target6:0:1: Ending Domain Validation scsi 6:0:5:0: Sequential-Access EXABYTE EXB8500C8CQANXR4 0730 PQ: 0 ANSI: 2 target6:0:5: asynchronous target6:0:5: Beginning Domain Validation target6:0:5: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 11) target6:0:5: Domain Validation skipping write tests target6:0:5: Ending Domain Validation scsi 6:0:6:0: Sequential-Access SONY SDT-10000 0110 PQ: 0 ANSI: 2 target6:0:6: asynchronous target6:0:6: Beginning Domain Validation target6:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) target6:0:6: Domain Validation skipping write tests target6:0:6: Ending Domain Validation ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 19 (level, low) -> IRQ 19 scsi7 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs scsi 7:0:2:0: Sequential-Access HP 88780 A674 PQ: 0 ANSI: 1 CCS target7:0:2: Beginning Domain Validation target7:0:2: Ending Domain Validation scsi 7:0:3:0: Sequential-Access Quantum DLT4000 D473 PQ: 0 ANSI: 2 target7:0:3: Beginning Domain Validation target7:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target7:0:3: Domain Validation skipping write tests target7:0:3: Ending Domain Validation BIOS EDD facility v0.16 2004-Jun-25, 8 devices found Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 17 sda1 sda2 sda3 <<6>ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 sda5<6>ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 sda6<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice sda7 > hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.8 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd:<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller sdd1 usb usb2: Manufacturer: Linux 2.6.26.8 ehci_hcd sd 3:0:0:0: [sdd] Attached SCSI disk sd 4:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sde3 < sde5 sde6<6>usb usb2: SerialNumber: 0000:00:13.2 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 sde7 > ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 sd 4:0:0:0: [sde] Attached SCSI disk sd 4:0:1:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:1:0: [sdf] Write Protect is off sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:1:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:1:0: [sdf] Write Protect is off sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 sdf7 > sd 4:0:1:0: [sdf] Attached SCSI disk sd 5:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected sdg: sdg1 sd 5:0:0:0: [sdg] Attached SCSI disk sd 6:0:0:0: [sdh] Unsupported sector size 768. sd 6:0:0:0: [sdh] 0 512-byte hardware sectors (0 MB) sd 6:0:0:0: [sdh] Write Protect is off sd 6:0:0:0: [sdh] Mode Sense: ab 00 10 08 sd 6:0:0:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 6:0:0:0: [sdh] Attached SCSI disk sd 6:0:1:0: [sdi] 3675960 256-byte hardware sectors (941 MB) usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.8 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 sd 6:0:1:0: [sdi] Write Protect is off sd 6:0:1:0: [sdi] Mode Sense: 5b 00 00 08 sd 6:0:1:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected sd 6:0:1:0: [sdi] 3675960 256-byte hardware sectors (941 MB) sd 6:0:1:0: [sdi] Write Protect is off sd 6:0:1:0: [sdi] Mode Sense: 5b 00 00 08 sd 6:0:1:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdi:<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.8 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected unknown partition table sd 6:0:1:0: [sdi] Attached SCSI disk usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26.8 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.26.8 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.26.8 ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 Here is where any kernel with the above commit in hangs