Initializing cgroup subsys cpuset Linux version 2.6.26 (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP PREEMPT Wed May 26 13:00:29 EDT 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffe0000 (usable) BIOS-e820: 00000000cffe0000 - 00000000cffe3000 (ACPI NVS) BIOS-e820: 00000000cffe3000 - 00000000cfff0000 (ACPI data) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Warning only 4GB will be used. Use a HIGHMEM64G enabled kernel. 3264MB HIGHMEM available. 832MB LOWMEM available. found SMP MP-table at [c00f4f40] 000f4f40 Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 212992 HighMem 212992 -> 1048576 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1048576 DMI 2.5 present. ACPI: RSDP 000F8FA0, 0024 (r2 RD790 ) ACPI: RSDT CFFE3000, 0034 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: FACP CFFE3080, 0074 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: DSDT CFFE3100, 86E1 (r1 RD790 AWRDACPI 1000 MSFT 3000000) ACPI: FACS CFFE0000, 0040 ACPI: HPET CFFEB8C0, 0038 (r1 RD790 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG CFFEB900, 003C (r1 RD790 AWRDACPI 42302E31 AWRD 0) ACPI: APIC CFFEB800, 0084 (r1 RD790 AWRDACPI 42302E31 AWRD 0) ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 38788 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 Kernel command line: root=/dev/disk/by-id/ata-ST3120827AS_4MS1MCBH-part5 splash=silent noresume bigphysarea=0x4000 vmalloc=192M apm=off motr vrsx vga=0x31a nohpet hpet=off console=ttyS0,9600 console=tty0 3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3400.394 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3364348k/4194304k available (1757k kernel code, 42356k reserved, 730k data, 216k init, 2555776k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB) lowmem : 0xc0000000 - 0xf4000000 ( 832 MB) .init : 0xc0373000 - 0xc03a9000 ( 216 kB) .data : 0xc02b75ba - 0xc036dec8 ( 730 kB) .text : 0xc0100000 - 0xc02b75ba (1757 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 6802.91 BogoMIPS (lpj=3401455) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(4) -> Core 0 Checking 'hlt' instruction... OK. ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 1/1 ip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6799.29 BogoMIPS (lpj=3399646) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(4) -> Core 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 2/2 ip 2000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6799.27 BogoMIPS (lpj=3399638) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2(4) -> Core 2 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom(tm) II X4 965 Processor stepping 02 Booting processor 3/3 ip 2000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6799.29 BogoMIPS (lpj=3399646) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3(4) -> Core 3 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom(tm) II X4 965 Processor stepping 02 Brought up 4 CPUs Total of 4 processors activated (27200.77 BogoMIPS). net_namespace: 660 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:11.0: set SATA to AHCI mode PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0c: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0c: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: Cannot allocate resource region 3 of device 0000:00:00.0 ACPI: RTC can wake from S4 system 00:01: ioport range 0x4100-0x411f has been reserved system 00:01: ioport range 0x228-0x22f has been reserved system 00:01: ioport range 0x40b-0x40b has been reserved system 00:01: ioport range 0x4d6-0x4d6 has been reserved system 00:01: ioport range 0xc00-0xc01 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6d has been reserved system 00:01: ioport range 0xc6f-0xc6f has been reserved system 00:01: ioport range 0xcd0-0xcd1 has been reserved system 00:01: ioport range 0xcd2-0xcd3 has been reserved system 00:01: ioport range 0xcd4-0xcdf has been reserved system 00:01: ioport range 0x4000-0x40fe has been reserved system 00:01: ioport range 0x4210-0x4217 has been reserved system 00:01: ioport range 0xb10-0xb1f has been reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:01: iomem range 0x0-0x0 could not be reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x220-0x225 has been reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:07: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0xf0000-0xfffff could not be reserved system 00:0c: iomem range 0x0-0x1fffff could not be reserved system 00:0c: iomem range 0xcffe0000-0xcfffffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0xcffdffff could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved system 00:0c: iomem range 0x0-0x0 could not be reserved PCI: Bridge: 0000:00:02.0 IO window: b000-bfff MEM window: 0xf7000000-0xf9ffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:02:00.0 IO window: a000-afff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff PCI: Bridge: 0000:00:04.0 IO window: a000-afff MEM window: 0xfdd00000-0xfdefffff PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff PCI: Bridge: 0000:00:09.0 IO window: e000-efff MEM window: 0xfdb00000-0xfdbfffff PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff PCI: Bridge: 0000:07:0c.0 IO window: c000-cfff MEM window: 0xfc800000-0xfd3fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:06:04.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:05:00.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:00:0b.0 IO window: c000-dfff MEM window: 0xfa800000-0xfd7fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:00:14.4 IO window: 9000-9fff MEM window: 0xfda00000-0xfdafffff PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 5497k freed audit: initializing netlink socket (disabled) type=2000 audit(1274956113.924:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1591 for ipc namespace c034ef48 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability vesafb: framebuffer at 0xd0000000, mapped to 0xf4880000, using 5120k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:d4f0 vesafb: pmi: set display start = c00cd526, set palette = c00cd590 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_acpi_add: no address or irqs in _CRS Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 Using IPI No-Shortcut mode Freeing unused kernel memory: 216k freed ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: Expecting a [Reference] package element, found type 0 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (30 C) No dock devices found. SCSI subsystem initialized ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: controller can't do PMP, turning off CAP_PMP input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 ata5.00: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.01: ATA-6: ST3120827AS, 3.42, max UDMA/133 ata5.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/100 ata5.01: configured for UDMA/100 ata6.00: ATA-7: ST3250620A, 3.AAD, max UDMA/100 ata6.00: 488397168 sectors, multi 16: LBA48 ata6.01: ATAPI: SONY DVD RW DRU-180A, 1.60, max UDMA/66 ata6.00: configured for UDMA/100 ata6.01: configured for UDMA/66 scsi 4:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 4:0:1:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 scsi 5:0:0:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 scsi 5:0:1:0: CD-ROM SONY DVD RW DRU-180A 1.60 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi6 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs scsi 6:0:0:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2 target6:0:0: asynchronous scsi6:A:0:0: Tagged Queuing enabled. Depth 32 target6:0:0: Beginning Domain Validation target6:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target6:0:0: Domain Validation skipping write tests target6:0:0: Ending Domain Validation scsi 6:0:1:0: Direct-Access IMPRIMIS 94601-15 4614 PQ: 0 ANSI: 1 CCS target6:0:1: asynchronous target6:0:1: Beginning Domain Validation target6:0:1: Ending Domain Validation scsi 6:0:5:0: Sequential-Access EXABYTE EXB8500C8CQANXR4 0730 PQ: 0 ANSI: 2 target6:0:5: asynchronous target6:0:5: Beginning Domain Validation target6:0:5: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 11) target6:0:5: Domain Validation skipping write tests target6:0:5: Ending Domain Validation scsi 6:0:6:0: Sequential-Access SONY SDT-10000 0110 PQ: 0 ANSI: 2 target6:0:6: asynchronous target6:0:6: Beginning Domain Validation target6:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) target6:0:6: Domain Validation skipping write tests target6:0:6: Ending Domain Validation ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 19 (level, low) -> IRQ 19 scsi7 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs scsi 7:0:2:0: Sequential-Access HP 88780 A674 PQ: 0 ANSI: 1 CCS target7:0:2: Beginning Domain Validation target7:0:2: Ending Domain Validation scsi 7:0:3:0: Sequential-Access Quantum DLT4000 D473 PQ: 0 ANSI: 2 target7:0:3: Beginning Domain Validation target7:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target7:0:3: Domain Validation skipping write tests target7:0:3: Ending Domain Validation BIOS EDD facility v0.16 2004-Jun-25, 8 devices found Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>ACPI: PCI Interrupt 0000:00:12.2[B] -> sda1 sda2 sda3 < sda5 sda6 sda7 > GSI 17 (level, low) -> IRQ 17 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1<6>ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.26 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 sd 2:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 sd 3:0:0:0: [sdd] Attached SCSI disk sd 4:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sde3 < sde5 sde6 sde7 > sd 4:0:0:0: [sde] Attached SCSI disk sd 4:0:1:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.26 ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 sd 4:0:1:0: [sdf] Write Protect is off sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:1:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) sd 4:0:1:0: [sdf] Write Protect is off sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 sdf7 > sd 4:0:1:0: [sdf] Attached SCSI disk sd 5:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sd 5:0:0:0: [sdg] Attached SCSI disk sd 6:0:0:0: [sdh] Unsupported sector size 768. sd 6:0:0:0: [sdh] 0 512-byte hardware sectors (0 MB) sd 6:0:0:0: [sdh] Write Protect is off sd 6:0:0:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 6:0:0:0: [sdh] Attached SCSI disk sd 6:0:1:0: [sdi] 3675960 256-byte hardware sectors (941 MB) sd 6:0:1:0: [sdi] Write Protect is off sd 6:0:1:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:1:0: [sdi] 3675960 256-byte hardware sectors (941 MB) sd 6:0:1:0: [sdi] Write Protect is off sd 6:0:1:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdi: