| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100529131812.GA5051@limpeloula>
Date: Sat, 29 May 2010 16:18:12 +0300
From: Nanakos Chrysostomos <nanakos@...ed-net.gr>
To: gregkh@...e.de
Cc: horms@...ge.net.au, hsweeten@...iongravers.com, ss@....gov.au,
randy.dunlap@...cle.com, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] Staging: dt3155: dt3155_drv.c: Fix checkpatch.pl issues.
Fix resolves checkpatch.pl issues for dt3155_drv.c file.
Signed-off-by: Nanakos Chrysostomos <nanakos@...ed-net.gr>
---
drivers/staging/dt3155/dt3155_drv.c | 612 ++++++++++++++++-------------------
1 files changed, 283 insertions(+), 329 deletions(-)
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index 40ef97f..394bc66 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -1,7 +1,7 @@
/*
Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
- Jason Lapenta, Scott Smedley, Greg Sharp
+ Jason Lapenta, Scott Smedley, Greg Sharp
This file is part of the DT3155 Device Driver.
@@ -27,14 +27,14 @@ MA 02111-1307 USA
03-Jul-2000 JML n/a
10-Oct-2001 SS port to 2.4 kernel
02-Apr-2002 SS Mods to use allocator as a standalone module;
- Merged John Roll's changes (john@....harvard.edu)
- to make work with multiple boards.
+ Merged John Roll's changes (john@....harvard.edu)
+ to make work with multiple boards.
02-Jul-2002 SS Merged James Rose's chages (rosejr@...due.edu) to:
- * fix successive interrupt-driven captures
- * add select/poll support.
+ *fix successive interrupt-driven captures
+ *add select/poll support.
10-Jul-2002 GCS Add error check when ndevices > MAXBOARDS.
02-Aug-2002 GCS Fix field mode so that odd (lower) field is stored
- in lower half of buffer.
+ in lower half of buffer.
05-Aug-2005 SS port to 2.6 kernel.
26-Oct-2009 SS port to 2.6.30 kernel.
@@ -65,8 +65,8 @@ extern void printques(int);
#include <linux/sched.h>
#include <linux/smp_lock.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include "dt3155.h"
#include "dt3155_drv.h"
@@ -89,16 +89,16 @@ int dt3155_errno = 0;
#define MAXPCI 16
#ifdef DT_DEBUG
-#define DT_3155_DEBUG_MSG(x,y) printk(x,y)
+#define DT_3155_DEBUG_MSG(x, y) printk(x, y)
#else
-#define DT_3155_DEBUG_MSG(x,y)
+#define DT_3155_DEBUG_MSG(x, y)
#endif
/* wait queue for interrupts */
wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
#define DT_3155_SUCCESS 0
-#define DT_3155_FAILURE -EIO
+#define DT_3155_FAILURE (-EIO)
/* set to dynamicaly allocate, but it is tunable: */
/* insmod DT_3155 dt3155 dt3155_major=XX */
@@ -138,9 +138,9 @@ u32 unique_tag = 0;;
* to idle. I don't know why this works and the other way doesn't.
* (James Rose)
*/
-static void quick_stop (int minor)
+static void quick_stop(int minor)
{
- // TODO: scott was here
+ /* TODO: scott was here */
#if 1
ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* disable interrupts */
@@ -177,41 +177,38 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
/* find out who issued the interrupt */
for (index = 0; index < ndevices; index++) {
- if(dev_id == (void*) &dt3155_status[index])
- {
- minor = index;
- break;
+ if (dev_id == (void *) &dt3155_status[index]) {
+ minor = index;
+ break;
}
}
/* hopefully we should not get here */
if (minor < 0 || minor >= MAXBOARDS) {
- printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
+ printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
return;
}
/* Check for corruption and set a flag if so */
ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
- if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
- {
- /* TODO: this should probably stop acquisition */
- /* and set some flags so that dt3155_read */
- /* returns an error next time it is called */
- dt3155_errno = DT_ERR_CORRUPT;
- printk("dt3155: corrupt field\n");
- return;
+ if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD)) {
+ /* TODO: this should probably stop acquisition
+ * and set some flags so that dt3155_read
+ * returns an error next time it is called.
+ */
+ dt3155_errno = DT_ERR_CORRUPT;
+ printk(KERN_INFO "dt3155: corrupt field\n");
+ return;
}
ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* Handle the even field ... */
- if (int_csr_r.fld.FLD_END_EVE)
- {
- if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- dt3155_fbuffer[minor]->frame_count++;
+ if (int_csr_r.fld.FLD_END_EVE) {
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD) {
+ dt3155_fbuffer[minor]->frame_count++;
}
ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
@@ -220,28 +217,23 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
int_csr_r.fld.FLD_END_EVE = 1;
/* disable the interrupt if last field */
- if (dt3155_fbuffer[minor]->stop_acquire)
- {
- printk("dt3155: even stopped.\n");
+ if (dt3155_fbuffer[minor]->stop_acquire) {
+ printk(KERN_INFO "dt3155: even stopped.\n");
dt3155_fbuffer[minor]->even_stopped = 1;
if (i2c_even_csr.fld.SNGL_EVE)
- {
- int_csr_r.fld.FLD_END_EVE_EN = 0;
- }
+ int_csr_r.fld.FLD_END_EVE_EN = 0;
else
- {
i2c_even_csr.fld.SNGL_EVE = 1;
- }
}
WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* Set up next DMA if we are doing FIELDS */
if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
- into the lower half of the buffer */
+ DT3155_STATE_FLD) {
+ /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
+ * into the lower half of the buffer.
+ */
const u32 stride = dt3155_status[minor].config.cols;
buffer_addr = dt3155_fbuffer[minor]->
frame_info[dt3155_fbuffer[minor]->active_buf].addr
@@ -275,42 +267,35 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
}
/* ... now handle the odd field */
- if (int_csr_r.fld.FLD_END_ODD)
- {
- ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
+ if (int_csr_r.fld.FLD_END_ODD) {
+ ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
/* Clear the interrupt? */
int_csr_r.fld.FLD_END_ODD = 1;
if (dt3155_fbuffer[minor]->even_happened ||
(dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- dt3155_fbuffer[minor]->frame_count++;
+ DT3155_STATE_FLD) {
+ dt3155_fbuffer[minor]->frame_count++;
}
if (dt3155_fbuffer[minor]->stop_acquire &&
- dt3155_fbuffer[minor]->even_stopped)
- {
- printk(KERN_DEBUG "dt3155: stopping odd..\n");
- if (i2c_odd_csr.fld.SNGL_ODD)
- {
- /* disable interrupts */
- int_csr_r.fld.FLD_END_ODD_EN = 0;
- dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
+ dt3155_fbuffer[minor]->even_stopped) {
+ printk(KERN_DEBUG "dt3155: stopping odd..\n");
+ if (i2c_odd_csr.fld.SNGL_ODD) {
+ /* disable interrupts */
+ int_csr_r.fld.FLD_END_ODD_EN = 0;
+ dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
/* mark the system stopped: */
- dt3155_status[minor].state |= DT3155_STATE_IDLE;
- dt3155_fbuffer[minor]->stop_acquire = 0;
- dt3155_fbuffer[minor]->even_stopped = 0;
-
- printk(KERN_DEBUG "dt3155: state is now %x\n",
+ dt3155_status[minor].state |= DT3155_STATE_IDLE;
+ dt3155_fbuffer[minor]->stop_acquire = 0;
+ dt3155_fbuffer[minor]->even_stopped = 0;
+ printk(KERN_DEBUG "dt3155: state is now %x\n",
dt3155_status[minor].state);
}
else
- {
- i2c_odd_csr.fld.SNGL_ODD = 1;
- }
+ i2c_odd_csr.fld.SNGL_ODD = 1;
}
WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
@@ -320,24 +305,21 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
/* and wake up the process if sleeping */
if (dt3155_fbuffer[minor]->even_happened ||
(dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
-
- local_save_flags(flags);
- local_irq_disable();
+ DT3155_STATE_FLD) {
+ local_save_flags(flags);
+ local_irq_disable();
#ifdef DEBUG_QUES_B
printques(minor);
#endif
- if (dt3155_fbuffer[minor]->nbuffers > 2)
- {
- if (!are_empty_buffers(minor))
- {
- /* The number of active + locked buffers is
- * at most 2, and since there are none empty, there
- * must be at least nbuffers-2 ready buffers.
- * This is where we 'drop frames', oldest first. */
- push_empty(pop_ready(minor), minor);
+ if (dt3155_fbuffer[minor]->nbuffers > 2) {
+ if (!are_empty_buffers(minor)) {
+ /* The number of active + locked buffers is
+ * at most 2, and since there are none empty, there
+ * must be at least nbuffers-2 ready buffers.
+ * This is where we 'drop frames', oldest first.
+ */
+ push_empty(pop_ready(minor), minor);
}
/* The ready_que can't be full, since we know
@@ -350,22 +332,20 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
frame_info[dt3155_fbuffer[minor]->
active_buf].tag = ++unique_tag;
}
- else /* nbuffers == 2, special case */
- { /* There is 1 active buffer.
- * If there is a locked buffer, keep the active buffer
- * the same -- that means we drop a frame.
- */
- if (dt3155_fbuffer[minor]->locked_buf < 0)
- {
- push_ready(minor,
+ /* nbuffers == 2, special case */
+ else {
+ /* There is 1 active buffer.
+ * If there is a locked buffer, keep the active buffer
+ * the same -- that means we drop a frame.
+ */
+ if (dt3155_fbuffer[minor]->locked_buf < 0) {
+ push_ready(minor,
dt3155_fbuffer[minor]->active_buf);
- if (are_empty_buffers(minor))
- {
- dt3155_fbuffer[minor]->active_buf =
- pop_empty(minor);
+ if (are_empty_buffers(minor)) {
+ dt3155_fbuffer[minor]->active_buf =
+ pop_empty(minor);
}
- else
- { /* no empty or locked buffers, so use a readybuf */
+ else { /* no empty or locked buffers, so use a readybuf */
dt3155_fbuffer[minor]->active_buf =
pop_ready(minor);
}
@@ -388,12 +368,10 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
buffer_addr = dt3155_fbuffer[minor]->
frame_info[dt3155_fbuffer[minor]->active_buf].addr;
if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD)
- {
- WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
+ DT3155_STATE_FLD) {
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
}
- else
- {
+ else {
WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
@@ -410,7 +388,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
return;
}
/* If we get here, the Odd Field wasn't it either... */
- printk("neither even nor odd. shared perhaps?\n");
+ printk(KERN_INFO "neither even nor odd. shared perhaps?\n");
}
/*****************************************************
@@ -423,32 +401,33 @@ static void dt3155_init_isr(int minor)
{
const u32 stride = dt3155_status[minor].config.cols;
- switch (dt3155_status[minor].state & DT3155_STATE_MODE)
- {
- case DT3155_STATE_FLD:
- {
- even_dma_start_r = dt3155_status[minor].
- fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
- even_dma_stride_r = 0;
- odd_dma_stride_r = 0;
- WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
- even_dma_start_r);
- WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
- even_dma_stride_r);
- WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
- odd_dma_stride_r);
- break;
- }
+ switch (dt3155_status[minor].state & DT3155_STATE_MODE) {
+ case DT3155_STATE_FLD:
+ {
+ even_dma_start_r = dt3155_status[minor].
+ fbuffer.frame_info[dt3155_status[minor].
+ fbuffer.active_buf].addr;
+ even_dma_stride_r = 0;
+ odd_dma_stride_r = 0;
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
+ even_dma_start_r);
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
+ even_dma_stride_r);
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
+ odd_dma_stride_r);
+ break;
+ }
- case DT3155_STATE_FRAME:
- default:
- {
- even_dma_start_r = dt3155_status[minor].
- fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
- odd_dma_start_r = even_dma_start_r + stride;
- even_dma_stride_r = stride;
- odd_dma_stride_r = stride;
+ case DT3155_STATE_FRAME:
+ default:
+ {
+ even_dma_start_r = dt3155_status[minor].
+ fbuffer.frame_info[dt3155_status[minor].
+ fbuffer.active_buf].addr;
+ odd_dma_start_r = even_dma_start_r + stride;
+ even_dma_stride_r = stride;
+ odd_dma_stride_r = stride;
WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
even_dma_start_r);
@@ -487,7 +466,7 @@ static void dt3155_init_isr(int minor)
csr1_r.fld.FLD_CRPT_EVE = 1; /* writing a 1 clears flags */
csr1_r.fld.FLD_CRPT_ODD = 1;
- WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
+ WriteMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
/* Enable interrupts at the end of each field */
@@ -523,13 +502,12 @@ static int dt3155_ioctl(struct inode *inode,
int minor = MINOR(inode->i_rdev); /* What device are we ioctl()'ing? */
if (minor >= MAXBOARDS || minor < 0)
- return -ENODEV;
+ return -ENODEV;
/* make sure it is valid command */
- if (_IOC_NR(cmd) > DT3155_IOC_MAXNR)
- {
- printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
- printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
+ if (_IOC_NR(cmd) > DT3155_IOC_MAXNR) {
+ printk(KERN_INFO "DT3155: invalid IOCTL(0x%x)\n", cmd);
+ printk(KERN_INFO "DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
(unsigned int)DT3155_GET_CONFIG,
(unsigned int)DT3155_SET_CONFIG,
(unsigned int)DT3155_START,
@@ -538,87 +516,78 @@ static int dt3155_ioctl(struct inode *inode,
return -EINVAL;
}
- switch (cmd)
- {
- case DT3155_SET_CONFIG:
- {
- if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
-
+ switch (cmd) {
+ case DT3155_SET_CONFIG:
{
- struct dt3155_config tmp;
- if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
- return -EFAULT;
- /* check for valid settings */
- if (tmp.rows > DT3155_MAX_ROWS ||
- tmp.cols > DT3155_MAX_COLS ||
- (tmp.acq_mode != DT3155_MODE_FRAME &&
- tmp.acq_mode != DT3155_MODE_FIELD) ||
- (tmp.continuous != DT3155_SNAP &&
- tmp.continuous != DT3155_ACQ))
- {
- return -EINVAL;
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE)
+ return -EBUSY;
+
+ struct dt3155_config tmp;
+ if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
+ return -EFAULT;
+ /* check for valid settings */
+ if (tmp.rows > DT3155_MAX_ROWS ||
+ tmp.cols > DT3155_MAX_COLS ||
+ (tmp.acq_mode != DT3155_MODE_FRAME &&
+ tmp.acq_mode != DT3155_MODE_FIELD) ||
+ (tmp.continuous != DT3155_SNAP &&
+ tmp.continuous != DT3155_ACQ)) {
+ return -EINVAL;
}
dt3155_status[minor].config = tmp;
- }
return 0;
- }
- case DT3155_GET_CONFIG:
- {
- if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
+ }
+ case DT3155_GET_CONFIG:
+ {
+ if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
sizeof(struct dt3155_status)))
- return -EFAULT;
+ return -EFAULT;
return 0;
- }
- case DT3155_FLUSH: /* Flushes the buffers -- ensures fresh data */
- {
- if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
+ }
+ case DT3155_FLUSH: /* Flushes the buffers -- ensures fresh data */
+ {
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE)
+ return -EBUSY;
return dt3155_flush(minor);
- }
- case DT3155_STOP:
- {
- if (dt3155_status[minor].state & DT3155_STATE_STOP ||
- dt3155_status[minor].fbuffer.stop_acquire)
- return -EBUSY;
-
- if (dt3155_status[minor].state == DT3155_STATE_IDLE)
- return 0;
-
- quick_stop(minor);
- if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
+ }
+ case DT3155_STOP:
+ {
+ if (dt3155_status[minor].state & DT3155_STATE_STOP ||
+ dt3155_status[minor].fbuffer.stop_acquire)
+ return -EBUSY;
+ if (dt3155_status[minor].state == DT3155_STATE_IDLE)
+ return 0;
+
+ quick_stop(minor);
+ if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
sizeof(struct dt3155_status)))
- return -EFAULT;
+ return -EFAULT;
return 0;
- }
- case DT3155_START:
- {
- if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- return -EBUSY;
+ }
+ case DT3155_START:
+ {
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE)
+ return -EBUSY;
- dt3155_status[minor].fbuffer.stop_acquire = 0;
- dt3155_status[minor].fbuffer.frame_count = 0;
+ dt3155_status[minor].fbuffer.stop_acquire = 0;
+ dt3155_status[minor].fbuffer.frame_count = 0;
/* Set the MODE in the status -- we default to FRAME */
if (dt3155_status[minor].config.acq_mode == DT3155_MODE_FIELD)
- {
- dt3155_status[minor].state = DT3155_STATE_FLD;
- }
+ dt3155_status[minor].state = DT3155_STATE_FLD;
else
- {
- dt3155_status[minor].state = DT3155_STATE_FRAME;
- }
+ dt3155_status[minor].state = DT3155_STATE_FRAME;
dt3155_init_isr(minor);
if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
sizeof(struct dt3155_status)))
- return -EFAULT;
+ return -EFAULT;
return 0;
- }
- default:
- {
- printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
- printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
+ }
+ default:
+ {
+ printk(KERN_INFO "DT3155: invalid IOCTL(0x%x)\n", cmd);
+ printk(KERN_INFO "DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
(unsigned int)DT3155_GET_CONFIG,
(unsigned int)DT3155_SET_CONFIG,
DT3155_START, DT3155_STOP, DT3155_FLUSH);
@@ -637,7 +606,7 @@ static int dt3155_ioctl(struct inode *inode,
* It *looks* like it should work but since I'm not
* sure how to use it, I'm not actually sure. (NJC? ditto by SS)
*****************************************************/
-static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
+static int dt3155_mmap(struct file *file, struct vm_area_struct *vma)
{
/* which device are we mmapping? */
int minor = MINOR(file->f_dentry->d_inode->i_rdev);
@@ -645,7 +614,7 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
offset = vma->vm_pgoff << PAGE_SHIFT;
if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
- vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_IO;
/* Don't try to swap out physical pages.. */
vma->vm_flags |= VM_RESERVED;
@@ -654,20 +623,18 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
if ((offset == dt3155_status[minor].reg_addr &&
vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
(offset == dt3155_status[minor].mem_addr &&
- vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size))
- {
- if (remap_pfn_range(vma,
+ vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size)) {
+ if (remap_pfn_range(vma,
vma->vm_start,
offset >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
- printk("DT3155: remap_page_range() failed.\n");
- return -EAGAIN;
+ printk(KERN_INFO "DT3155: remap_page_range() failed.\n");
+ return -EAGAIN;
}
}
- else
- {
- printk("DT3155: dt3155_mmap() bad call.\n");
+ else {
+ printk(KERN_INFO "DT3155: dt3155_mmap() bad call.\n");
return -ENXIO;
}
@@ -682,28 +649,27 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
* MOD_INC_USE_COUNT make sure that the driver memory is not freed
* while the device is in use.
*****************************************************/
-static int dt3155_open(struct inode* inode, struct file* filep)
+static int dt3155_open(struct inode *inode, struct file *filep)
{
int minor = MINOR(inode->i_rdev); /* what device are we opening? */
if (dt3155_dev_open[minor]) {
- printk ("DT3155: Already opened by another process.\n");
+ printk(KERN_INFO "DT3155: Already opened by another process.\n");
return -EBUSY;
}
- if (dt3155_status[minor].device_installed==0)
- {
- printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
+ if (dt3155_status[minor].device_installed == 0) {
+ printk(KERN_INFO "DT3155 Open Error: No such device dt3155 minor number %d\n",
minor);
return -EIO;
}
if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
- printk ("DT3155: Not in idle state (state = %x)\n",
+ printk(KERN_INFO "DT3155: Not in idle state (state = %x)\n",
dt3155_status[minor].state);
return -EBUSY;
}
- printk("DT3155: Device opened.\n");
+ printk(KERN_INFO "DT3155: Device opened.\n");
dt3155_dev_open[minor] = 1 ;
@@ -730,18 +696,14 @@ static int dt3155_close(struct inode *inode, struct file *filep)
int minor;
minor = MINOR(inode->i_rdev); /* which device are we closing */
- if (!dt3155_dev_open[minor])
- {
- printk("DT3155: attempt to CLOSE a not OPEN device\n");
+ if (!dt3155_dev_open[minor]) {
+ printk(KERN_INFO "DT3155: attempt to CLOSE a not OPEN device\n");
}
- else
- {
+ else {
dt3155_dev_open[minor] = 0;
if (dt3155_status[minor].state != DT3155_STATE_IDLE)
- {
- quick_stop(minor);
- }
+ quick_stop(minor);
}
return 0;
}
@@ -761,9 +723,8 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
/* TODO: this should check the error flag and */
/* return an error on hardware failures */
- if (count != sizeof(struct dt3155_read))
- {
- printk("DT3155 ERROR (NJC): count is not right\n");
+ if (count != sizeof(struct dt3155_read)) {
+ printk(KERN_INFO "DT3155 ERROR (NJC): count is not right\n");
return -EINVAL;
}
@@ -779,16 +740,15 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
/* return -EBUSY;*/
/* non-blocking reads should return if no data */
- if (filep->f_flags & O_NDELAY)
- {
- if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
- /*printk("dt3155: no buffers available (?)\n");*/
- /* printques(minor); */
+ if (filep->f_flags & O_NDELAY) {
+ frame_index = dt3155_get_ready_buffer(minor);
+ if (frame_index < 0) {
+ /* printk("dt3155: no buffers available (?)\n");*/
+ /* printques(minor); */
return -EAGAIN;
}
}
- else
- {
+ else {
/*
* sleep till data arrives , or we get interrupted.
* Note that wait_event_interruptible() does not actually
@@ -798,12 +758,11 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
(frame_index = dt3155_get_ready_buffer(minor))
>= 0);
- if (frame_index < 0)
- {
- printk ("DT3155: read: interrupted\n");
- quick_stop (minor);
- printques(minor);
- return -EINTR;
+ if (frame_index < 0) {
+ printk(KERN_INFO "DT3155: read: interrupted\n");
+ quick_stop(minor);
+ printques(minor);
+ return -EINTR;
}
}
@@ -819,19 +778,19 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
put_user(dt3155_status[minor].state, (unsigned int *) buf);
buf += sizeof(u32);
if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
- return -EFAULT;
+ return -EFAULT;
return sizeof(struct dt3155_read);
}
-static unsigned int dt3155_poll (struct file * filp, poll_table *wait)
+static unsigned int dt3155_poll(struct file *filp, poll_table *wait)
{
int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
if (!is_ready_buf_empty(minor))
- return POLLIN | POLLRDNORM;
+ return POLLIN | POLLRDNORM;
- poll_wait (filp, &dt3155_read_wait_queue[minor], wait);
+ poll_wait(filp, &dt3155_read_wait_queue[minor], wait);
return 0;
}
@@ -853,7 +812,7 @@ dt3155_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
* needed by init_module
* register_chrdev
*****************************************************/
-static struct file_operations dt3155_fops = {
+static const struct file_operations dt3155_fops = {
.read = dt3155_read,
.unlocked_ioctl = dt3155_unlocked_ioctl,
.mmap = dt3155_mmap,
@@ -868,7 +827,7 @@ static struct file_operations dt3155_fops = {
*
* PCI has been totally reworked in 2.1..
*****************************************************/
-static int find_PCI (void)
+static int find_PCI(void)
{
struct pci_dev *pci_dev = NULL;
int error, pci_index = 0;
@@ -877,22 +836,22 @@ static int find_PCI (void)
unsigned char irq;
while ((pci_dev = pci_get_device
- (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL)
- {
- pci_index ++;
+ (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL) {
+ pci_index++;
/* Is it really there? */
- if ((error =
- pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
+ error = pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device);
+ if (error)
continue;
/* Found a board */
- DT_3155_DEBUG_MSG("DT3155: Device number %d \n", pci_index);
+ DT_3155_DEBUG_MSG("DT3155: Device number %d\n", pci_index);
/* Make sure the driver was compiled with enough buffers to handle
this many boards */
if (pci_index > MAXBOARDS) {
- printk("DT3155: ERROR - found %d devices, but driver only configured "
+ printk(KERN_INFO "DT3155: ERROR - found %d devices,
+ but driver only configured "
"for %d devices\n"
"DT3155: Please change MAXBOARDS in dt3155.h\n",
pci_index, MAXBOARDS);
@@ -901,39 +860,38 @@ static int find_PCI (void)
/* Now, just go out and make sure that this/these device(s) is/are
actually mapped into the kernel address space */
- if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
- (u32 *) &base)))
- {
- printk("DT3155: Was not able to find device \n");
+ error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
+ (u32 *) &base);
+ if (error) {
+ printk(KERN_INFO "DT3155: Was not able to find device\n");
goto err;
}
- DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx \n", base);
+ DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx\n", base);
dt3155_status[pci_index-1].reg_addr = base;
/* Remap the base address to a logical address through which we
* can access it. */
- dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
+ dt3155_lbase[pci_index - 1] = ioremap(base, PCI_PAGE_SIZE);
dt3155_status[pci_index - 1].reg_addr = base;
- DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
+ DT_3155_DEBUG_MSG("DT3155: New logical address is %p\n",
dt3155_lbase[pci_index-1]);
- if (!dt3155_lbase[pci_index-1])
- {
- printk("DT3155: Unable to remap control registers\n");
- goto err;
+ if (!dt3155_lbase[pci_index-1]) {
+ printk(KERN_INFO "DT3155: Unable to remap control registers\n");
+ goto err;
}
- if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq)))
- {
- printk("DT3155: Was not able to find device \n");
- goto err;
+ error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq);
+ if (error) {
+ printk(KERN_INFO "DT3155: Was not able to find device\n");
+ goto err;
}
- DT_3155_DEBUG_MSG("DT3155: IRQ is %d \n",irq);
+ DT_3155_DEBUG_MSG("DT3155: IRQ is %d\n", irq);
dt3155_status[pci_index-1].irq = irq;
/* Set flag: kth device found! */
dt3155_status[pci_index-1].device_installed = 1;
- printk("DT3155: Installing device %d w/irq %d and address %p\n",
+ printk(KERN_INFO "DT3155: Installing device %d w/irq %d and address %p\n",
pci_index,
dt3155_status[pci_index-1].irq,
dt3155_lbase[pci_index-1]);
@@ -964,96 +922,94 @@ int init_module(void)
devname[1] = "dt3155b";
#endif
- printk("DT3155: Loading module...\n");
+ printk(KERN_INFO "DT3155: Loading module...\n");
/* Register the device driver */
rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
- if(rcode < 0)
- {
- printk(KERN_INFO "DT3155: register_chrdev failed \n");
- return rcode;
+ if (rcode < 0) {
+ printk(KERN_INFO "DT3155: register_chrdev failed\n");
+ return rcode;
}
- if(dt3155_major == 0)
- dt3155_major = rcode; /* dynamic */
+ if (dt3155_major == 0)
+ dt3155_major = rcode; /* dynamic */
/* init the status variables. */
/* DMA memory is taken care of in setup_buffers() */
- for (index = 0; index < MAXBOARDS; index++)
- {
- dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
- dt3155_status[index].config.continuous = DT3155_ACQ;
- dt3155_status[index].config.cols = DT3155_MAX_COLS;
- dt3155_status[index].config.rows = DT3155_MAX_ROWS;
- dt3155_status[index].state = DT3155_STATE_IDLE;
+ for (index = 0; index < MAXBOARDS; index++) {
+ dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
+ dt3155_status[index].config.continuous = DT3155_ACQ;
+ dt3155_status[index].config.cols = DT3155_MAX_COLS;
+ dt3155_status[index].config.rows = DT3155_MAX_ROWS;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
/* find_PCI() will check if devices are installed; */
/* first assume they're not: */
- dt3155_status[index].mem_addr = 0;
- dt3155_status[index].mem_size = 0;
- dt3155_status[index].state = DT3155_STATE_IDLE;
- dt3155_status[index].device_installed = 0;
+ dt3155_status[index].mem_addr = 0;
+ dt3155_status[index].mem_size = 0;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
+ dt3155_status[index].device_installed = 0;
}
/* Now let's find the hardware. find_PCI() will set ndevices to the
* number of cards found in this machine. */
{
- if ((rcode = find_PCI()) != DT_3155_SUCCESS)
- {
- printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
+ rcode = find_PCI();
+ if (rcode != DT_3155_SUCCESS) {
+ printk(KERN_INFO "DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
unregister_chrdev(dt3155_major, "dt3155");
return rcode;
}
}
/* Ok, time to setup the frame buffers */
- if((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0)
- {
- printk("DT3155: Error: setting up buffer not large enough.");
+ rcode = dt3155_setup_buffers(&allocatorAddr);
+ if (rcode < 0) {
+ printk(KERN_INFO "DT3155: Error: setting up buffer not large enough.");
unregister_chrdev(dt3155_major, "dt3155");
return rcode;
}
/* If we are this far, then there is enough RAM */
/* for the buffers: Print the configuration. */
- for( index = 0; index < ndevices; index++)
- {
- printk("DT3155: Device = %d; acq_mode = %d; "
- "continuous = %d; cols = %d; rows = %d;\n",
- index ,
- dt3155_status[index].config.acq_mode,
- dt3155_status[index].config.continuous,
- dt3155_status[index].config.cols,
- dt3155_status[index].config.rows);
- printk("DT3155: m_addr = 0x%x; m_size = %ld; "
- "state = %d; device_installed = %d\n",
- dt3155_status[index].mem_addr,
- (long int)dt3155_status[index].mem_size,
- dt3155_status[index].state,
- dt3155_status[index].device_installed);
+ for (index = 0; index < ndevices; index++) {
+ printk(KERN_INFO "DT3155: Device = %d; acq_mode = %d; "
+ "continuous = %d; cols = %d; rows = %d;\n",
+ index ,
+ dt3155_status[index].config.acq_mode,
+ dt3155_status[index].config.continuous,
+ dt3155_status[index].config.cols,
+ dt3155_status[index].config.rows);
+ printk(KERN_INFO "DT3155: m_addr = 0x%x; m_size = %ld; "
+ "state = %d; device_installed = %d\n",
+ dt3155_status[index].mem_addr,
+ (long int)dt3155_status[index].mem_size,
+ dt3155_status[index].state,
+ dt3155_status[index].device_installed);
}
/* Disable ALL interrupts */
int_csr_r.reg = 0;
- for( index = 0; index < ndevices; index++)
- {
- WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
- if(dt3155_status[index].device_installed)
- {
- /*
- * This driver *looks* like it can handle sharing interrupts,
- * but I can't actually test myself. I've had reports that it
- * DOES work so I'll enable it for now. This comment will remain
- * as a reminder in case any problems arise. (SS)
- */
- /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
- rcode = request_irq(dt3155_status[index].irq, (void *)dt3155_isr,
+ for (index = 0; index < ndevices; index++) {
+ WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
+ if (dt3155_status[index].device_installed) {
+ /*
+ * This driver *looks* like it can handle sharing interrupts,
+ * but I can't actually test myself. I've had reports that it
+ * DOES work so I'll enable it for now.
+ * This comment will remain
+ * as a reminder in case any problems arise. (SS)
+ */
+ /*
+ * in older kernels flags are: SA_SHIRQ | SA_INTERRUPT
+ */
+ rcode = request_irq(dt3155_status[index].irq,
+ (void *)dt3155_isr,
IRQF_SHARED | IRQF_DISABLED, devname[index],
- (void*) &dt3155_status[index]);
- if(rcode < 0)
- {
- printk("DT3155: minor %d request_irq failed for IRQ %d\n",
+ (void *) &dt3155_status[index]);
+ if (rcode < 0) {
+ printk(KERN_INFO "DT3155: minor %d request_irq failed for IRQ %d\n",
index, dt3155_status[index].irq);
unregister_chrdev(dt3155_major, "dt3155");
return rcode;
@@ -1061,7 +1017,7 @@ int init_module(void)
}
}
- printk("DT3155: finished loading\n");
+ printk(KERN_INFO "DT3155: finished loading\n");
return 0;
}
@@ -1074,25 +1030,23 @@ void cleanup_module(void)
{
int index;
- printk("DT3155: cleanup_module called\n");
+ printk(KERN_INFO "DT3155: cleanup_module called\n");
/* removed DMA allocated with the allocator */
#ifdef STANDALONE_ALLOCATOR
if (allocatorAddr != 0)
- allocator_free_dma(allocatorAddr);
+ allocator_free_dma(allocatorAddr);
#else
allocator_cleanup();
#endif
unregister_chrdev(dt3155_major, "dt3155");
- for(index = 0; index < ndevices; index++)
- {
- if(dt3155_status[index].device_installed == 1)
- {
- printk("DT3155: Freeing irq %d for device %d\n",
- dt3155_status[index].irq, index);
- free_irq(dt3155_status[index].irq, (void*)&dt3155_status[index]);
+ for (index = 0; index < ndevices; index++) {
+ if (dt3155_status[index].device_installed == 1) {
+ printk(KERN_INFO "DT3155: Freeing irq %d for device %d\n",
+ dt3155_status[index].irq, index);
+ free_irq(dt3155_status[index].irq, (void *)&dt3155_status[index]);
}
}
}
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists