| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <c8725442e3c5b8c7be2cc381ed69a3dc0283ebe1.1275481997.git.mina86@mina86.com>
Date: Wed, 02 Jun 2010 14:45:28 +0200
From: Michal Nazarewicz <m.nazarewicz@...sung.com>
To: linux-usb@...r.kernel.org
Cc: David Brownell <dbrownell@...rs.sourceforge.net>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
linux-kernel@...r.kernel.org
Subject: [PATCHv3 07/11] USB: gadget: g_multi: added documentation and INF files
A short documentation of the g_multi driver along with INF
files for Windows XP SP3 are provided.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
Documentation/usb/gadget_multi.txt | 159 +++++++++++++++++++++++
Documentation/usb/gadget_multi_rndis.inf | 200 +++++++++++++++++++++++++++++
Documentation/usb/gadget_multi_serial.inf | 44 +++++++
3 files changed, 403 insertions(+), 0 deletions(-)
create mode 100644 Documentation/usb/gadget_multi.txt
create mode 100644 Documentation/usb/gadget_multi_rndis.inf
create mode 100644 Documentation/usb/gadget_multi_serial.inf
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
new file mode 100644
index 0000000..bd53a9f
--- /dev/null
+++ b/Documentation/usb/gadget_multi.txt
@@ -0,0 +1,159 @@
+ -*- org -*-
+
+* Overview
+
+The Multifunction Composite Gadget (or g_multi) is a composite gadget
+that makes extensive use of the composite framework to provide
+a... multifunction gadget.
+
+In it's standard configuration it provides a single USB configuration
+with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
+USB Mass Storage functions.
+
+A CDC ECM (Ethernet) function may be turned on via a Kconfig option
+and RNDIS can be turned off. If they are both enabled the gadget will
+have two configurations -- one with RNDIS and another with CDC ECM[3].
+
+Please not that if you use non-standard configuration (that is enable
+CDC ECM) you may need to change vendor and/or product ID.
+
+* Host drivers
+
+To make use of the gadget one needs to make it work on host side --
+without that there's no hope of achieving anything with the gadget.
+As one might expect, things one need to do very from system to system.
+
+** Linux host drivers
+
+Since the gadget uses standard composite framework and appears as such
+to Linux host it does not need any additional drivers on Linux host
+side. All the functions are handled by respective drivers developed
+for them.
+
+This is also true for two configuration set-up with RNDIS
+configuration being the first one. Linux host will use the second
+configuration with CDC ECM which should work better under Linux.
+
+** Windows host drivers
+
+For the gadget two work under Windown two conditions have to be met:
+
+*** Detecting as composite gadget
+
+First of all, Windows need to detect the gadget as an USB composite
+gadget which on its own have some conditions[4]. If they are met,
+Windows lets USB Generic Parent Driver[5] handle the device which then
+tries to much drivers for each individual interface (sort of, don't
+get into too many details).
+
+The good news is, you do not have to worry about most of conditions!
+
+The only thing to worry is that the gadget has to have a single
+configuration so a dual RNDIS and CDC ECM gadget won't work unless you
+create a proper INF -- and of course, if you do submit it!
+
+*** Attaching drivers for each function
+
+The other, trickier thing is making Windows attach drivers to each
+individual function.
+
+For mass storage it is trivial since Windows detect it's an interface
+implementing USB Mass Storage class and selects appropriate driver.
+
+Things are harder with RDNIS and CDC ACM.
+
+**** RNDIS
+
+To make Windows select RNDIS drivers for the first function in the
+gadget, one needs to use the [[file:gadget_multi_rndis.inf]] file
+provided with this document. It "attaches" Window's RNDIS driver to
+the first interface of the gadget.
+
+Please note, that while testing we encountered some issues[6] when
+RNDIS was not the first interface. You do not need to worry abut it
+unless you are trying to develop your own gadget in which case watch
+out for this bug.
+
+**** CDC ACM
+
+Similarly, [[file:gadget_multi_serial.inf]] is provided for CDC ACM.
+Note, however that it also requires an usbser.sys file which can be
+extracted form Windows XP SP3 cab files.
+
+There is another usbser.sys file floating around the Internet but as
+we were testing the gadget it failed to work. It is very likely that
+one needs usbser.sys in version intended for one's version of Windows.
+
+We do net claim to be experts as far as INF files are considered so we
+think that there should be a better way of defining files in the
+[[file:gadget_multi_serial.inf]] so that it will work regardless of SP
+version installed. Again, if you happen to hack a better INF do not
+hesitate submitting it!
+
+**** Customising the gadget
+
+If you intend to hack the g_multi gadget be advised that rearranging
+functions will obviously change interface numbers for each of the
+functionality. As an effect provided INFs won't work since they have
+interface numbers hard-coded in them (it's not hard to change those
+though).
+
+This also means, that after experimenting with g_multi and changing
+provided functions one should change gadget's vendor and/or product ID
+so there will be no collision with other customised gadgets or the
+original gadget.
+
+Failing to comply may cause brain damage after wondering for hours why
+things don't work as intended before realising Windows have cached
+some drivers information (changing USB port may sometimes help).
+
+**** Improvements in INF files
+
+It needs to be noted that we are not Windows driver experts and as
+such we do not claim that provided INF files are flawless or that they
+will work on each and every Windows versions (they were tested on
+Windows XP SP3 only).
+
+The bottom line is, if you can improve the INF files, please do and
+share the results[7]. :)
+
+** Other systems
+
+At this moment, drivers for any other systems have not been tested.
+Knowing how MacOS is based on BSD and BSD is an Open Source it is
+believed that it should (read: "I have no idea whether it will") work
+out-of-the-box.
+
+For more exotic systems I have even less to say...
+
+Any testing and drivers *are* *welcome*!
+
+* Authors
+
+This document has been written by Michal Nazarewicz
+([[mailto:mina86@...a86.com]]) and the INF files have been hacked by
+Marek Szyprowski ([[mailto:m.szyprowski@...sung.com]]) basing on the
+[[file:linux.inf]] file provided for Ethernet gadget and description
+from [[file:gadget_serial.txt]].
+
+* Footnotes
+
+[1] Remote Network Driver Interface Specification,
+[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+
+[2] Communications Device Class Abstract Control Model, spec for this
+and other USB classes can be found at
+[[http://www.usb.org/developers/devclass_docs/]].
+
+[3] CDC Ethernet Control Model.
+
+[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]].
+
+[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]].
+
+[6] To put it in some other nice words, Windows failed to respond to
+any user input.
+
+[7] Possibility to say `git rev-list --author='Your Name'
+linus/master|wc -l` returns non-zero -- priceless. :]
+
diff --git a/Documentation/usb/gadget_multi_rndis.inf b/Documentation/usb/gadget_multi_rndis.inf
new file mode 100644
index 0000000..2222fd0
--- /dev/null
+++ b/Documentation/usb/gadget_multi_rndis.inf
@@ -0,0 +1,200 @@
+; MS-Windows driver config matching some basic modes of the
+; Linux-USB Ethernet/RNDIS gadget firmware:
+;
+; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
+; cable modem profile, and supports most non-Microsoft USB hosts
+;
+; - RNDIS plus CDC Subset ... used by hardware that incapable of
+; full CDC Ethernet support.
+;
+; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
+; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
+; http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
+
+
+[Version]
+Signature = "$CHICAGO$"
+Class = Net
+ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
+Provider = %Linux%
+Compatible = 1
+MillenniumPreferred = .ME
+DriverVer = 03/30/2004,0.0.0.0
+; catalog file would be used by WHQL
+;CatalogFile = Linux.cat
+
+[Manufacturer]
+%Linux% = LinuxDevices,NT.5.1
+
+[LinuxDevices]
+; NetChip IDs, used by both firmware modes
+%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4ab&MI_00
+
+[LinuxDevices.NT.5.1]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4ab&MI_00
+
+[ControlFlags]
+ExcludeFromSelect=*
+
+; Windows 98, Windows 98 Second Edition specific sections --------
+
+[RNDIS]
+DeviceID = usb8023
+MaxInstance = 512
+DriverVer = 03/30/2004,0.0.0.0
+AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
+
+[RNDIS_AddReg_98]
+HKR, , DevLoader, 0, *ndis
+HKR, , DeviceVxDs, 0, usb8023.sys
+HKR, NDIS, LogDriverName, 0, "usb8023"
+HKR, NDIS, MajorNdisVersion, 1, 5
+HKR, NDIS, MinorNdisVersion, 1, 0
+HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
+HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
+HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
+HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
+HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
+HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
+HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
+HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4ab&MI_00"
+
+[RNDIS_Install_98]
+CopyFiles=RNDIS_CopyFiles_98
+
+[RNDIS_CopyFiles_98]
+usb8023.sys, usb8023w.sys, , 0
+rndismp.sys, rndismpw.sys, , 0
+
+; Windows Millennium Edition specific sections --------------------
+
+[RNDIS.ME]
+DeviceID = usb8023
+MaxInstance = 512
+DriverVer = 03/30/2004,0.0.0.0
+AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+
+[RNDIS_AddReg_ME]
+HKR, , DevLoader, 0, *ndis
+HKR, , DeviceVxDs, 0, usb8023.sys
+HKR, NDIS, LogDriverName, 0, "usb8023"
+HKR, NDIS, MajorNdisVersion, 1, 5
+HKR, NDIS, MinorNdisVersion, 1, 0
+HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
+HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
+HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
+HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
+HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
+HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
+HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
+HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4ab&MI_00"
+
+[RNDIS_Install_ME]
+CopyFiles=RNDIS_CopyFiles_ME
+
+[RNDIS_CopyFiles_ME]
+usb8023.sys, usb8023m.sys, , 0
+rndismp.sys, rndismpm.sys, , 0
+
+; Windows 2000 specific sections ---------------------------------
+
+[RNDIS.NT]
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+DriverVer = 03/30/2004,0.0.0.0
+AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
+CopyFiles = RNDIS_CopyFiles_NT
+
+[RNDIS.NT.Services]
+AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
+
+[RNDIS_CopyFiles_NT]
+; no rename of files on Windows 2000, use the 'k' names as is
+usb8023k.sys, , , 0
+rndismpk.sys, , , 0
+
+[RNDIS_ServiceInst_NT]
+DisplayName = %ServiceDisplayName%
+ServiceType = 1
+StartType = 3
+ErrorControl = 1
+ServiceBinary = %12%\usb8023k.sys
+LoadOrderGroup = NDIS
+AddReg = RNDIS_WMI_AddReg_NT
+
+[RNDIS_WMI_AddReg_NT]
+HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
+
+; Windows XP specific sections -----------------------------------
+
+[RNDIS.NT.5.1]
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+DriverVer = 03/30/2004,0.0.0.0
+AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
+; no copyfiles - the files are already in place
+
+[RNDIS.NT.5.1.Services]
+AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
+
+[RNDIS_ServiceInst_51]
+DisplayName = %ServiceDisplayName%
+ServiceType = 1
+StartType = 3
+ErrorControl = 1
+ServiceBinary = %12%\usb8023.sys
+LoadOrderGroup = NDIS
+AddReg = RNDIS_WMI_AddReg_51
+
+[RNDIS_WMI_AddReg_51]
+HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
+
+; Windows 2000 and Windows XP common sections --------------------
+
+[RNDIS_AddReg_NT]
+HKR, Ndi, Service, 0, "USB_RNDIS"
+HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
+HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
+
+[RNDIS_EventLog]
+AddReg = RNDIS_EventLog_AddReg
+
+[RNDIS_EventLog_AddReg]
+HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
+HKR, , TypesSupported, 0x00010001, 7
+
+; Common Sections -------------------------------------------------
+
+[RNDIS_AddReg_Common]
+HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
+HKR, NDI\params\NetworkAddress, type, 0, "edit"
+HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
+HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
+HKR, NDI\params\NetworkAddress, default, 0, " "
+HKR, NDI\params\NetworkAddress, optional, 0, "1"
+
+[SourceDisksNames]
+1=%SourceDisk%,,1
+
+[SourceDisksFiles]
+usb8023m.sys=1
+rndismpm.sys=1
+usb8023w.sys=1
+rndismpw.sys=1
+usb8023k.sys=1
+rndismpk.sys=1
+
+[DestinationDirs]
+RNDIS_CopyFiles_98 = 10, system32/drivers
+RNDIS_CopyFiles_ME = 10, system32/drivers
+RNDIS_CopyFiles_NT = 12
+
+[Strings]
+ServiceDisplayName = "USB Remote NDIS Network Device Driver"
+NetworkAddress = "Network Address"
+Linux = "Linux Developer Community"
+LinuxDevice = "RNDIS Gadget/Linux Multifunction Gadget"
+SourceDisk = "Linux RNDIS Gadget Driver Install Disk"
+
diff --git a/Documentation/usb/gadget_multi_serial.inf b/Documentation/usb/gadget_multi_serial.inf
new file mode 100644
index 0000000..b04ace1
--- /dev/null
+++ b/Documentation/usb/gadget_multi_serial.inf
@@ -0,0 +1,44 @@
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%LINUX%
+DriverVer=08/17/2004,0.0.2.1
+; Copyright (C) 2004 Al Borchers (alborchers@...inerpoint.com)
+
+[Manufacturer]
+%LINUX%=GSerialDeviceList
+
+[GSerialDeviceList]
+%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4AB&MI_02
+
+[DestinationDirs]
+DefaultDestDir=10,System32\Drivers
+
+[GSerialInstall]
+CopyFiles=GSerialCopyFiles
+AddReg=GSerialAddReg
+
+[GSerialCopyFiles]
+usbser.sys
+
+[GSerialAddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,usbser.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[GSerialInstall.Services]
+AddService = usbser,0x0002,GSerialService
+
+[GSerialService]
+DisplayName = %GSERIAL_DISPLAY_NAME%
+ServiceType = 1 ; SERVICE_KERNEL_DRIVER
+StartType = 3 ; SERVICE_DEMAND_START
+ErrorControl = 1 ; SERVICE_ERROR_NORMAL
+ServiceBinary = %10%\System32\Drivers\usbser.sys
+LoadOrderGroup = Base
+
+[Strings]
+LINUX = "Linux"
+GSERIAL = "Serial Gadget/Linux Multifunction Gadget"
+GSERIAL_DISPLAY_NAME = "Serial Gadget/Linux Multifunction Gadget"
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists