| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 04 Jun 2010 18:46:43 +0200
From: Takashi Iwai <tiwai@...e.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org
Subject: [GIT PULL] sound fixes for 2.6.35-rc2
Linus,
please pull sound fixes for v2.6.35-rc2 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
A few big chunks can be found in this pull request, but these are all
for USB audio-v2 stack. Things about USB audio v2 get steady now
(hopefuly).
The other changes are spotty local fixes and quirk additions.
Thanks!
Takashi
===
Daniel Mack (9):
ALSA: usb-audio: UAC2: clean up parsing of bmaControls
ALSA: usb-audio: support partially write-protected UAC2 controls
include/linux/usb/audio-v2.h: add more UAC2 details
ALSA: usb-audio: fix selector unit string index accessor
ALSA: usb-audio: parse clock topology of UAC2 devices
ALSA: usb-audio: unify constants from specification
ALSA: usb-audio: add UAC2 sepecific Feature Unit controls
ALSA: usb-audio: clean up find_audio_control_unit()
ALSA: usb-audio: export UAC2 clock selectors as mixer controls
Daniel T Chen (4):
ALSA: hda: Use LPIB for an ASUS device
ALSA: hda: Use mb31 quirk for an iMac model
ALSA: hda: Use LPIB for another mainboard
ALSA: hda: Use LPIB for ASUS M2V
Jaroslav Kysela (1):
ALSA: hda-intel - fix wallclk variable update and condition
Sascha Hauer (2):
ASoC: Add missing Kconfig entry for Phytec boards
ASoC: MX31ads sound support should depend on MACH_MX31ADS_WM1133_EV1
Takashi Iwai (2):
usb/gadget: Replace the old USB audio FU definitions in f_audio.c
ALSA: asihpi - Fix uninitialized variable
---
drivers/usb/gadget/f_audio.c | 4 +-
include/linux/usb/audio-v2.h | 31 ++++-
include/linux/usb/audio.h | 90 +++++++++----
sound/pci/asihpi/asihpi.c | 3 +
sound/pci/hda/hda_intel.c | 7 +-
sound/pci/hda/patch_realtek.c | 1 +
sound/soc/imx/Kconfig | 11 ++-
sound/usb/Makefile | 3 +-
sound/usb/card.c | 18 +--
sound/usb/card.h | 1 +
sound/usb/clock.c | 311 +++++++++++++++++++++++++++++++++++++++++
sound/usb/clock.h | 12 ++
sound/usb/endpoint.c | 57 +++++++-
sound/usb/format.c | 16 ++-
sound/usb/mixer.c | 215 +++++++++++++++-------------
sound/usb/mixer.h | 2 +
sound/usb/mixer_maps.c | 4 +-
sound/usb/pcm.c | 98 +-------------
sound/usb/usbaudio.h | 5 +-
19 files changed, 632 insertions(+), 257 deletions(-)
create mode 100644 sound/usb/clock.c
create mode 100644 sound/usb/clock.h
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 43bf445..b91115f 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -101,7 +101,7 @@ static struct uac_feature_unit_descriptor_0 feature_unit_desc = {
static struct usb_audio_control mute_control = {
.list = LIST_HEAD_INIT(mute_control.list),
.name = "Mute Control",
- .type = UAC_MUTE_CONTROL,
+ .type = UAC_FU_MUTE,
/* Todo: add real Mute control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
@@ -110,7 +110,7 @@ static struct usb_audio_control mute_control = {
static struct usb_audio_control volume_control = {
.list = LIST_HEAD_INIT(volume_control.list),
.name = "Volume Control",
- .type = UAC_VOLUME_CONTROL,
+ .type = UAC_FU_VOLUME,
/* Todo: add real Volume control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 92f1d99..383b94b 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,16 @@
/* v1.0 and v2.0 of this standard have many things in common. For the rest
* of the definitions, please refer to audio.h */
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x2;
+}
+
/* 4.7.2.1 Clock Source Descriptor */
struct uac_clock_source_descriptor {
@@ -31,6 +41,13 @@ struct uac_clock_source_descriptor {
__u8 iClockSource;
} __attribute__((packed));
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED 0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR 0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2)
+
/* 4.7.2.2 Clock Source Descriptor */
struct uac_clock_selector_descriptor {
@@ -39,8 +56,20 @@ struct uac_clock_selector_descriptor {
__u8 bDescriptorSubtype;
__u8 bClockID;
__u8 bNrInPins;
- __u8 bmControls;
__u8 baCSourceID[];
+ /* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __u8 bmControls;
+ __u8 iClockMultiplier;
} __attribute__((packed));
/* 4.7.2.4 Input terminal descriptor */
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 5d646c3..c51200c 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -47,6 +47,15 @@
#define UAC_FORMAT_TYPE 0x02
#define UAC_FORMAT_SPECIFIC 0x03
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
#define UAC_EP_GENERAL 0x01
@@ -73,6 +82,60 @@
#define UAC_GET_STAT 0xff
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT 0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE 0x01
+
/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
#define UAC_MS_HEADER 0x01
#define UAC_MIDI_IN_JACK 0x02
@@ -244,7 +307,7 @@ struct uac_selector_unit_descriptor {
static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
{
__u8 *raw = (__u8 *) desc;
- return raw[9 + desc->bLength - 1];
+ return raw[desc->bLength - 1];
}
/* 4.3.2.5 Feature Unit Descriptor */
@@ -463,31 +526,6 @@ struct uac_iso_endpoint_descriptor {
#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
#define UAC_EP_CS_ATTR_FILL_MAX 0x80
-/* A.10.2 Feature Unit Control Selectors */
-
-#define UAC_FU_CONTROL_UNDEFINED 0x00
-#define UAC_MUTE_CONTROL 0x01
-#define UAC_VOLUME_CONTROL 0x02
-#define UAC_BASS_CONTROL 0x03
-#define UAC_MID_CONTROL 0x04
-#define UAC_TREBLE_CONTROL 0x05
-#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06
-#define UAC_AUTOMATIC_GAIN_CONTROL 0x07
-#define UAC_DELAY_CONTROL 0x08
-#define UAC_BASS_BOOST_CONTROL 0x09
-#define UAC_LOUDNESS_CONTROL 0x0a
-
-#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1))
-#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1))
-#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1))
-#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1))
-#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1))
-#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
-#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
-#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1))
-#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1))
-#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1))
-
/* status word format (3.7.1.1) */
#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f74c737..1db586a 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2578,6 +2578,9 @@ static int __devinit snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
if (err)
return -err;
+ memset(&prev_ctl, 0, sizeof(prev_ctl));
+ prev_ctl.control_type = -1;
+
for (idx = 0; idx < 2000; idx++) {
err = hpi_mixer_get_control_by_index(
ss, asihpi->h_mixer,
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index dc79564..1df25cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1913,11 +1913,11 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
return -1; /* this shouldn't happen! */
- if (wallclk <= azx_dev->period_wallclk &&
+ if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
/* NG - it's below the first next period boundary */
return bdl_pos_adj[chip->dev_index] ? 0 : -1;
- azx_dev->start_wallclk = wallclk;
+ azx_dev->start_wallclk += wallclk;
return 1; /* OK, it's fine */
}
@@ -2288,6 +2288,8 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
@@ -2296,6 +2298,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 17d4548..d792cdd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9476,6 +9476,7 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = {
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index eba9b9d..252defe 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -13,9 +13,18 @@ config SND_MXC_SOC_SSI
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
- depends on SND_IMX_SOC && EXPERIMENTAL
+ depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
+
+config SND_SOC_PHYCORE_AC97
+ tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+ depends on MACH_PCM043 || MACH_PCA100
+ select SND_MXC_SOC_SSI
+ select SND_SOC_WM9712
+ help
+ Say Y if you want to add support for SoC audio on Phytec phyCORE
+ and phyCARD boards in AC97 mode
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index e7ac7f4..1e362bf 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -11,7 +11,8 @@ snd-usb-audio-objs := card.o \
endpoint.o \
urb.o \
pcm.o \
- helper.o
+ helper.o \
+ clock.o
snd-usbmidi-lib-objs := midi.o
diff --git a/sound/usb/card.c b/sound/usb/card.c
index da1346b..7a8ac1d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -236,7 +236,6 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
}
case UAC_VERSION_2: {
- struct uac_clock_source_descriptor *cs;
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
@@ -245,21 +244,6 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
return -EINVAL;
}
- /* FIXME: for now, we expect there is at least one clock source
- * descriptor and we always take the first one.
- * We should properly support devices with multiple clock sources,
- * clock selectors and sample rate conversion units. */
-
- cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
- NULL, UAC2_CLOCK_SOURCE);
-
- if (!cs) {
- snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
- return -EINVAL;
- }
-
- chip->clock_id = cs->bClockID;
-
for (i = 0; i < assoc->bInterfaceCount; i++) {
int intf = assoc->bFirstInterface + i;
@@ -481,6 +465,8 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
goto __error;
}
+ chip->ctrl_intf = alts;
+
if (err > 0) {
/* create normal USB audio interfaces */
if (snd_usb_create_streams(chip, ifnum) < 0 ||
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ed92420..1febf2f 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -25,6 +25,7 @@ struct audioformat {
unsigned int rate_min, rate_max; /* min/max rates */
unsigned int nr_rates; /* number of rate table entries */
unsigned int *rate_table; /* rate table */
+ unsigned char clock; /* associated clock */
};
struct snd_usb_substream;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
new file mode 100644
index 0000000..b7aadd6
--- /dev/null
+++ b/sound/usb/clock.c
@@ -0,0 +1,311 @@
+/*
+ * Clock domain and sample rate management functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "midi.h"
+#include "mixer.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "helper.h"
+#include "debug.h"
+#include "pcm.h"
+#include "urb.h"
+#include "format.h"
+
+static struct uac_clock_source_descriptor *
+ snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_source_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SOURCE))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_selector_descriptor *
+ snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_selector_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SELECTOR))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_multiplier_descriptor *
+ snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_multiplier_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_MULTIPLIER))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+{
+ unsigned char buf;
+ int ret;
+
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+ UAC2_CS_CUR,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+ UAC2_CX_CLOCK_SELECTOR << 8, selector_id << 8,
+ &buf, sizeof(buf), 1000);
+
+ if (ret < 0)
+ return ret;
+
+ return buf;
+}
+
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+{
+ int err;
+ unsigned char data;
+ struct usb_device *dev = chip->dev;
+
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_CLOCK_VALID << 8, source_id << 8,
+ &data, sizeof(data), 1000);
+
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+ __func__, source_id);
+ return err;
+ }
+
+ return !!data;
+}
+
+/* Try to find the clock source ID of a given clock entity */
+
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id, unsigned long *visited)
+{
+ struct uac_clock_source_descriptor *source;
+ struct uac_clock_selector_descriptor *selector;
+ struct uac_clock_multiplier_descriptor *multiplier;
+
+ entity_id &= 0xff;
+
+ if (test_and_set_bit(entity_id, visited)) {
+ snd_printk(KERN_WARNING
+ "%s(): recursive clock topology detected, id %d.\n",
+ __func__, entity_id);
+ return -EINVAL;
+ }
+
+ /* first, see if the ID we're looking for is a clock source already */
+ source = snd_usb_find_clock_source(host_iface, entity_id);
+ if (source)
+ return source->bClockID;
+
+ selector = snd_usb_find_clock_selector(host_iface, entity_id);
+ if (selector) {
+ int ret;
+
+ /* the entity ID we are looking for is a selector.
+ * find out what it currently selects */
+ ret = uac_clock_selector_get_val(chip, selector->bClockID);
+ if (ret < 0)
+ return ret;
+
+ if (ret > selector->bNrInPins || ret < 1) {
+ printk(KERN_ERR
+ "%s(): selector reported illegal value, id %d, ret %d\n",
+ __func__, selector->bClockID, ret);
+
+ return -EINVAL;
+ }
+
+ return __uac_clock_find_source(chip, host_iface,
+ selector->baCSourceID[ret-1],
+ visited);
+ }
+
+ /* FIXME: multipliers only act as pass-thru element for now */
+ multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+ if (multiplier)
+ return __uac_clock_find_source(chip, host_iface,
+ multiplier->bCSourceID, visited);
+
+ return -EINVAL;
+}
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id)
+{
+ DECLARE_BITMAP(visited, 256);
+ memset(visited, 0, sizeof(visited));
+ return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+}
+
+static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned int ep;
+ unsigned char data[3];
+ int err, crate;
+
+ ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+ /* if endpoint doesn't have sampling rate control, bail out */
+ if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
+ snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
+ dev->devnum, iface, fmt->altsetting);
+ return 0;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, rate, ep);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, ep);
+ return 0; /* some devices don't support reading */
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16);
+ if (crate != rate) {
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ // runtime->rate = crate;
+ }
+
+ return 0;
+}
+
+static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned char data[4];
+ int err, crate;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+
+ if (clock < 0)
+ return clock;
+
+ if (!uac_clock_source_is_valid(chip, clock)) {
+ snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
+ dev->devnum, iface, fmt->altsetting, clock);
+ return -ENXIO;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ data[3] = rate >> 24;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
+ dev->devnum, iface, fmt->altsetting, rate);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ return err;
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ if (crate != rate)
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+
+ return 0;
+}
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+
+ switch (altsd->bInterfaceProtocol) {
+ case UAC_VERSION_1:
+ return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+
+ case UAC_VERSION_2:
+ return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+ }
+
+ return -EINVAL;
+}
+
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
new file mode 100644
index 0000000..beb2536
--- /dev/null
+++ b/sound/usb/clock.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_CLOCK_H
+#define __USBAUDIO_CLOCK_H
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate);
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id);
+
+#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 28ee1ce..9593b91 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -190,6 +190,38 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
return attributes;
}
+static struct uac2_input_terminal_descriptor *
+ snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_input_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_INPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_output_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_OUTPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
{
struct usb_device *dev;
@@ -199,7 +231,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
int i, altno, err, stream;
int format = 0, num_channels = 0;
struct audioformat *fp = NULL;
- int num, protocol;
+ int num, protocol, clock = 0;
struct uac_format_type_i_continuous_descriptor *fmt;
dev = chip->dev;
@@ -263,6 +295,8 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
}
case UAC_VERSION_2: {
+ struct uac2_input_terminal_descriptor *input_term;
+ struct uac2_output_terminal_descriptor *output_term;
struct uac_as_header_descriptor_v2 *as =
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
@@ -281,7 +315,25 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
num_channels = as->bNrChannels;
format = le32_to_cpu(as->bmFormats);
- break;
+ /* lookup the terminal associated to this interface
+ * to extract the clock */
+ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (input_term) {
+ clock = input_term->bCSourceID;
+ break;
+ }
+
+ output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (output_term) {
+ clock = output_term->bCSourceID;
+ break;
+ }
+
+ snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+ dev->devnum, iface_no, altno, as->bTerminalLink);
+ continue;
}
default:
@@ -338,6 +390,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
* (fp->maxpacksize & 0x7ff);
fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+ fp->clock = clock;
/* some quirks for attributes here */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index fe29d61..5367cd1 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -29,6 +29,7 @@
#include "quirks.h"
#include "helper.h"
#include "debug.h"
+#include "clock.h"
/*
* parse the audio format type I descriptor
@@ -215,15 +216,17 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
int i, nr_rates, data_size, ret = 0;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
/* get the number of sample rates first by only fetching 2 bytes */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
tmp, sizeof(tmp), 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+ __func__, clock);
goto err;
}
@@ -237,12 +240,13 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
/* now get the full information */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, data_size, 1000);
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, data_size, 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+ __func__, clock);
ret = -EINVAL;
goto err_free;
}
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 03ce971..a060d00 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -78,39 +78,6 @@ enum {
USB_MIXER_U16,
};
-enum {
- USB_PROC_UPDOWN = 1,
- USB_PROC_UPDOWN_SWITCH = 1,
- USB_PROC_UPDOWN_MODE_SEL = 2,
-
- USB_PROC_PROLOGIC = 2,
- USB_PROC_PROLOGIC_SWITCH = 1,
- USB_PROC_PROLOGIC_MODE_SEL = 2,
-
- USB_PROC_3DENH = 3,
- USB_PROC_3DENH_SWITCH = 1,
- USB_PROC_3DENH_SPACE = 2,
-
- USB_PROC_REVERB = 4,
- USB_PROC_REVERB_SWITCH = 1,
- USB_PROC_REVERB_LEVEL = 2,
- USB_PROC_REVERB_TIME = 3,
- USB_PROC_REVERB_DELAY = 4,
-
- USB_PROC_CHORUS = 5,
- USB_PROC_CHORUS_SWITCH = 1,
- USB_PROC_CHORUS_LEVEL = 2,
- USB_PROC_CHORUS_RATE = 3,
- USB_PROC_CHORUS_DEPTH = 4,
-
- USB_PROC_DCR = 6,
- USB_PROC_DCR_SWITCH = 1,
- USB_PROC_DCR_RATIO = 2,
- USB_PROC_DCR_MAX_AMP = 3,
- USB_PROC_DCR_THRESHOLD = 4,
- USB_PROC_DCR_ATTACK = 5,
- USB_PROC_DCR_RELEASE = 6,
-};
/*E-mu 0202(0404) eXtension Unit(XU) control*/
enum {
@@ -198,22 +165,24 @@ static int check_mapped_selector_name(struct mixer_build *state, int unitid,
/*
* find an audio control unit with the given unit id
- * this doesn't return any clock related units, so they need to be handled elsewhere
*/
static void *find_audio_control_unit(struct mixer_build *state, unsigned char unit)
{
- unsigned char *p;
+ /* we just parse the header */
+ struct uac_feature_unit_descriptor *hdr = NULL;
- p = NULL;
- while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
- USB_DT_CS_INTERFACE)) != NULL) {
- if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC2_EXTENSION_UNIT_V2 && p[3] == unit)
- return p;
+ while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
+ USB_DT_CS_INTERFACE)) != NULL) {
+ if (hdr->bLength >= 4 &&
+ hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
+ hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+ hdr->bUnitID == unit)
+ return hdr;
}
+
return NULL;
}
-
/*
* copy a string with the given id
*/
@@ -344,8 +313,8 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v
buf, sizeof(buf), 1000);
if (ret < 0) {
- snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+ snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+ request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
return ret;
}
@@ -462,6 +431,16 @@ static int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel,
int index, int value)
{
int err;
+ unsigned int read_only = (channel == 0) ?
+ cval->master_readonly :
+ cval->ch_readonly & (1 << (channel - 1));
+
+ if (read_only) {
+ snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+ __func__, channel, cval->control);
+ return 0;
+ }
+
err = snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
value);
if (err < 0)
@@ -631,6 +610,7 @@ static int get_term_name(struct mixer_build *state, struct usb_audio_term *iterm
*/
static int check_input_term(struct mixer_build *state, int id, struct usb_audio_term *term)
{
+ int err;
void *p1;
memset(term, 0, sizeof(*term));
@@ -651,6 +631,11 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
term->channels = d->bNrChannels;
term->chconfig = le32_to_cpu(d->bmChannelConfig);
term->name = d->iTerminal;
+
+ /* call recursively to get the clock selectors */
+ err = check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
}
return 0;
case UAC_FEATURE_UNIT: {
@@ -667,7 +652,8 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
term->name = uac_mixer_unit_iMixer(d);
return 0;
}
- case UAC_SELECTOR_UNIT: {
+ case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR: {
struct uac_selector_unit_descriptor *d = p1;
/* call recursively to retrieve the channel info */
if (check_input_term(state, d->baSourceID[0], term) < 0)
@@ -690,6 +676,13 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
return 0;
}
+ case UAC2_CLOCK_SOURCE: {
+ struct uac_clock_source_descriptor *d = p1;
+ term->type = d->bDescriptorSubtype << 16; /* virtual type */
+ term->id = id;
+ term->name = d->iClockSource;
+ return 0;
+ }
default:
return -ENODEV;
}
@@ -709,16 +702,20 @@ struct usb_feature_control_info {
};
static struct usb_feature_control_info audio_feature_info[] = {
- { "Mute", USB_MIXER_INV_BOOLEAN },
- { "Volume", USB_MIXER_S16 },
+ { "Mute", USB_MIXER_INV_BOOLEAN },
+ { "Volume", USB_MIXER_S16 },
{ "Tone Control - Bass", USB_MIXER_S8 },
{ "Tone Control - Mid", USB_MIXER_S8 },
{ "Tone Control - Treble", USB_MIXER_S8 },
{ "Graphic Equalizer", USB_MIXER_S8 }, /* FIXME: not implemeted yet */
- { "Auto Gain Control", USB_MIXER_BOOLEAN },
- { "Delay Control", USB_MIXER_U16 },
- { "Bass Boost", USB_MIXER_BOOLEAN },
- { "Loudness", USB_MIXER_BOOLEAN },
+ { "Auto Gain Control", USB_MIXER_BOOLEAN },
+ { "Delay Control", USB_MIXER_U16 },
+ { "Bass Boost", USB_MIXER_BOOLEAN },
+ { "Loudness", USB_MIXER_BOOLEAN },
+ /* UAC2 specific */
+ { "Input Gain Control", USB_MIXER_U16 },
+ { "Input Gain Pad Control", USB_MIXER_BOOLEAN },
+ { "Phase Inverter Control", USB_MIXER_BOOLEAN },
};
@@ -958,7 +955,7 @@ static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
unsigned int ctl_mask, int control,
struct usb_audio_term *iterm, int unitid,
- int read_only)
+ int readonly_mask)
{
struct uac_feature_unit_descriptor *desc = raw_desc;
unsigned int len = 0;
@@ -970,7 +967,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
control++; /* change from zero-based to 1-based value */
- if (control == UAC_GRAPHIC_EQUALIZER_CONTROL) {
+ if (control == UAC_FU_GRAPHIC_EQUALIZER) {
/* FIXME: not supported yet */
return;
}
@@ -989,20 +986,25 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
cval->control = control;
cval->cmask = ctl_mask;
cval->val_type = audio_feature_info[control-1].type;
- if (ctl_mask == 0)
+ if (ctl_mask == 0) {
cval->channels = 1; /* master channel */
- else {
+ cval->master_readonly = readonly_mask;
+ } else {
int i, c = 0;
for (i = 0; i < 16; i++)
if (ctl_mask & (1 << i))
c++;
cval->channels = c;
+ cval->ch_readonly = readonly_mask;
}
/* get min/max values */
get_min_max(cval, 0);
- if (read_only)
+ /* if all channels in the mask are marked read-only, make the control
+ * read-only. set_cur_mix_value() will check the mask again and won't
+ * issue write commands to read-only channels. */
+ if (cval->channels == readonly_mask)
kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
else
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
@@ -1021,8 +1023,8 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
kctl->id.name, sizeof(kctl->id.name));
switch (control) {
- case UAC_MUTE_CONTROL:
- case UAC_VOLUME_CONTROL:
+ case UAC_FU_MUTE:
+ case UAC_FU_VOLUME:
/* determine the control name. the rule is:
* - if a name id is given in descriptor, use it.
* - if the connected input can be determined, then use the name
@@ -1049,9 +1051,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
len = append_ctl_name(kctl, " Playback");
}
}
- append_ctl_name(kctl, control == UAC_MUTE_CONTROL ?
+ append_ctl_name(kctl, control == UAC_FU_MUTE ?
" Switch" : " Volume");
- if (control == UAC_VOLUME_CONTROL) {
+ if (control == UAC_FU_VOLUME) {
kctl->tlv.c = mixer_vol_tlv;
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1150,7 +1152,7 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
snd_printk(KERN_INFO
"usbmixer: master volume quirk for PCM2702 chip\n");
/* disable non-functional volume control */
- master_bits &= ~UAC_FU_VOLUME;
+ master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
break;
}
if (channels > 0)
@@ -1188,19 +1190,22 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
for (j = 0; j < channels; j++) {
unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize);
- if (mask & (1 << (i * 2))) {
+ if (uac2_control_is_readable(mask, i)) {
ch_bits |= (1 << j);
- if (~mask & (1 << ((i * 2) + 1)))
+ if (!uac2_control_is_writeable(mask, i))
ch_read_only |= (1 << j);
}
}
- /* FIXME: the whole unit is read-only if any of the channels is marked read-only */
+ /* NOTE: build_feature_ctl() will mark the control read-only if all channels
+ * are marked read-only in the descriptors. Otherwise, the control will be
+ * reported as writeable, but the driver will not actually issue a write
+ * command for read-only channels */
if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
- build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, !!ch_read_only);
- if (master_bits & (1 << i * 2))
+ build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only);
+ if (uac2_control_is_readable(master_bits, i))
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
- ~master_bits & (1 << ((i * 2) + 1)));
+ !uac2_control_is_writeable(master_bits, i));
}
}
@@ -1392,51 +1397,51 @@ struct procunit_info {
};
static struct procunit_value_info updown_proc_info[] = {
- { USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info prologic_proc_info[] = {
- { USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info threed_enh_proc_info[] = {
- { USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 },
+ { UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info reverb_proc_info[] = {
- { USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 },
- { USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 },
+ { UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
+ { UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info chorus_proc_info[] = {
- { USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
- { USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
+ { UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
+ { UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_value_info dcr_proc_info[] = {
- { USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 },
- { USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 },
- { USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
- { USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 },
- { USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 },
+ { UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
+ { UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
+ { UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
+ { UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
+ { UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_info procunits[] = {
- { USB_PROC_UPDOWN, "Up Down", updown_proc_info },
- { USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info },
- { USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info },
- { USB_PROC_REVERB, "Reverb", reverb_proc_info },
- { USB_PROC_CHORUS, "Chorus", chorus_proc_info },
- { USB_PROC_DCR, "DCR", dcr_proc_info },
+ { UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
+ { UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
+ { UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
+ { UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
+ { UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
+ { UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
{ 0 },
};
/*
@@ -1524,7 +1529,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
cval->channels = 1;
/* get min/max values */
- if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) {
+ if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
/* FIXME: hard-coded */
cval->min = 1;
@@ -1619,7 +1624,7 @@ static int mixer_ctl_selector_get(struct snd_kcontrol *kcontrol, struct snd_ctl_
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, err;
- err = get_cur_ctl_value(cval, 0, &val);
+ err = get_cur_ctl_value(cval, cval->control << 8, &val);
if (err < 0) {
if (cval->mixer->ignore_ctl_error) {
ucontrol->value.enumerated.item[0] = 0;
@@ -1638,7 +1643,7 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, oval, err;
- err = get_cur_ctl_value(cval, 0, &oval);
+ err = get_cur_ctl_value(cval, cval->control << 8, &oval);
if (err < 0) {
if (cval->mixer->ignore_ctl_error)
return 0;
@@ -1647,7 +1652,7 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
val = ucontrol->value.enumerated.item[0];
val = get_abs_value(cval, val);
if (val != oval) {
- set_cur_ctl_value(cval, 0, val);
+ set_cur_ctl_value(cval, cval->control << 8, val);
return 1;
}
return 0;
@@ -1729,6 +1734,11 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
cval->res = 1;
cval->initialized = 1;
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ cval->control = UAC2_CX_CLOCK_SELECTOR;
+ else
+ cval->control = 0;
+
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
if (! namelist) {
snd_printk(KERN_ERR "cannot malloc\n");
@@ -1778,7 +1788,9 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
if (! len)
strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
- if ((state->oterm.type & 0xff00) == 0x0100)
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ append_ctl_name(kctl, " Clock Source");
+ else if ((state->oterm.type & 0xff00) == 0x0100)
append_ctl_name(kctl, " Capture Source");
else
append_ctl_name(kctl, " Playback Source");
@@ -1812,10 +1824,12 @@ static int parse_audio_unit(struct mixer_build *state, int unitid)
switch (p1[2]) {
case UAC_INPUT_TERMINAL:
+ case UAC2_CLOCK_SOURCE:
return 0; /* NOP */
case UAC_MIXER_UNIT:
return parse_audio_mixer_unit(state, unitid, p1);
case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR:
return parse_audio_selector_unit(state, unitid, p1);
case UAC_FEATURE_UNIT:
return parse_audio_feature_unit(state, unitid, p1);
@@ -1912,6 +1926,11 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
err = parse_audio_unit(&state, desc->bSourceID);
if (err < 0)
return err;
+
+ /* for UAC2, use the same approach to also add the clock selectors */
+ err = parse_audio_unit(&state, desc->bCSourceID);
+ if (err < 0)
+ return err;
}
}
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 1301238..a7cf100 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -34,6 +34,8 @@ struct usb_mixer_elem_info {
unsigned int id;
unsigned int control; /* CS or ICN (high byte) */
unsigned int cmask; /* channel mask bitmap: 0 = master */
+ unsigned int ch_readonly;
+ unsigned int master_readonly;
int channels;
int val_type;
int min, max, res;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d93fc89..f1324c4 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -85,8 +85,8 @@ static struct usbmix_name_map extigy_map[] = {
/* 16: MU (w/o controls) */
{ 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */
{ 17, "Channel Routing", 2 }, /* PU: mode select */
- { 18, "Tone Control - Bass", UAC_BASS_CONTROL }, /* FU */
- { 18, "Tone Control - Treble", UAC_TREBLE_CONTROL }, /* FU */
+ { 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */
+ { 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */
{ 18, "Master Playback" }, /* FU; others */
/* 19: OT speaker */
/* 20: OT headphone */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 056587d..4568298 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -31,6 +31,7 @@
#include "urb.h"
#include "helper.h"
#include "pcm.h"
+#include "clock.h"
/*
* return the current pcm pointer. just based on the hwptr_done value.
@@ -181,103 +182,6 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
return -EINVAL;
}
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned int ep;
- unsigned char data[3];
- int err, crate;
-
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- /* if endpoint doesn't have sampling rate control, bail out */
- if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
- snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
- dev->devnum, iface, fmt->altsetting);
- return 0;
- }
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
- dev->devnum, iface, fmt->altsetting, rate, ep);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
- dev->devnum, iface, fmt->altsetting, ep);
- return 0; /* some devices don't support reading */
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16);
- if (crate != rate) {
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
- // runtime->rate = crate;
- }
-
- return 0;
-}
-
-static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned char data[4];
- int err, crate;
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- data[3] = rate >> 24;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
- dev->devnum, iface, fmt->altsetting, rate);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
- dev->devnum, iface, fmt->altsetting);
- return err;
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-
- return 0;
-}
-
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_interface_descriptor *altsd = get_iface_desc(alts);
-
- switch (altsd->bInterfaceProtocol) {
- case UAC_VERSION_1:
- return set_sample_rate_v1(chip, iface, alts, fmt, rate);
-
- case UAC_VERSION_2:
- return set_sample_rate_v2(chip, iface, alts, fmt, rate);
- }
-
- return -EINVAL;
-}
-
/*
* find a matching format and set up the interface
*/
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 06ebf24..24d3319 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,9 +40,6 @@ struct snd_usb_audio {
int num_interfaces;
int num_suspended_intf;
- /* for audio class v2 */
- int clock_id;
-
struct list_head pcm_list; /* list of pcm streams */
int pcm_devs;
@@ -53,6 +50,8 @@ struct snd_usb_audio {
int setup; /* from the 'device_setup' module param */
int nrpacks; /* from the 'nrpacks' module param */
int async_unlink; /* from the 'async_unlink' module param */
+
+ struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists