[ 0.000000] Linux version 2.6.34 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Mon May 17 05:55:19 CEST 2010 [ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] RAMDISK: 37ec8000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dffde000 00040 [ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000 [ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000001bb6240 - 0000000001bb823f] [ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 1: 0x00080000 -> 0x000dffd0 [ 0.000000] 1: 0x00100000 -> 0x00120000 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s76520 r8192 d21784 u1048576 [ 0.000000] pcpu-alloc: s76520 r8192 d21784 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] Subtract (59 early reservations) [ 0.000000] #1 [0001000000 - 0001bb5798] TEXT DATA BSS [ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001bb6000 - 0001bb6238] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved [ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved [ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc [ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #10 [0000008000 - 000000c000] PGTABLE [ 0.000000] #11 [000000c000 - 000000d000] PGTABLE [ 0.000000] #12 [000000d000 - 000000f440] MEMNODEMAP [ 0.000000] #13 [0001bb6240 - 0001bb8240] NODE_DATA [ 0.000000] #14 [0100000000 - 0100002000] NODE_DATA [ 0.000000] #15 [0001bb8240 - 0001bb9240] BOOTMEM [ 0.000000] #16 [0001bb57c0 - 0001bb5940] BOOTMEM [ 0.000000] #17 [0080000000 - 0080000180] BOOTMEM [ 0.000000] #18 [00023ba000 - 00023bb000] BOOTMEM [ 0.000000] #19 [00023bb000 - 00023bc000] BOOTMEM [ 0.000000] #20 [0002400000 - 0004000000] MEMMAP 0 [ 0.000000] #21 [0100200000 - 0102000000] MEMMAP 1 [ 0.000000] #22 [0001bb5940 - 0001bb5ac0] BOOTMEM [ 0.000000] #23 [0001bb9240 - 0001bc5240] BOOTMEM [ 0.000000] #24 [0080000180 - 008000c180] BOOTMEM [ 0.000000] #25 [008000c180 - 008000f180] BOOTMEM [ 0.000000] #26 [0001bc6000 - 0001bc7000] BOOTMEM [ 0.000000] #27 [0001bb5ac0 - 0001bb5b01] BOOTMEM [ 0.000000] #28 [0001bb5b40 - 0001bb5b83] BOOTMEM [ 0.000000] #29 [0001bb5bc0 - 0001bb5e28] BOOTMEM [ 0.000000] #30 [0001bb5e40 - 0001bb5ea8] BOOTMEM [ 0.000000] #31 [0001bb5ec0 - 0001bb5f28] BOOTMEM [ 0.000000] #32 [0001bb5f40 - 0001bb5fa8] BOOTMEM [ 0.000000] #33 [0001bc5240 - 0001bc52a8] BOOTMEM [ 0.000000] #34 [0001bc52c0 - 0001bc5328] BOOTMEM [ 0.000000] #35 [0001bc5340 - 0001bc53a8] BOOTMEM [ 0.000000] #36 [0001bc53c0 - 0001bc5428] BOOTMEM [ 0.000000] #37 [0001bc5440 - 0001bc54a8] BOOTMEM [ 0.000000] #38 [0001bc54c0 - 0001bc5528] BOOTMEM [ 0.000000] #39 [0001bc5540 - 0001bc55a8] BOOTMEM [ 0.000000] #40 [0001bc55c0 - 0001bc5640] BOOTMEM [ 0.000000] #41 [0001bc5640 - 0001bc56c0] BOOTMEM [ 0.000000] #42 [0001c00000 - 0001c1a000] BOOTMEM [ 0.000000] #43 [0001d00000 - 0001d1a000] BOOTMEM [ 0.000000] #44 [0080200000 - 008021a000] BOOTMEM [ 0.000000] #45 [0080300000 - 008031a000] BOOTMEM [ 0.000000] #46 [0001bb5fc0 - 0001bb5fd0] BOOTMEM [ 0.000000] #47 [0001bc56c0 - 0001bc56d0] BOOTMEM [ 0.000000] #48 [0001bc5700 - 0001bc5710] BOOTMEM [ 0.000000] #49 [0001bc5740 - 0001bc5760] BOOTMEM [ 0.000000] #50 [0001bc5780 - 0001bc58c0] BOOTMEM [ 0.000000] #51 [0001bc58c0 - 0001bc5920] BOOTMEM [ 0.000000] #52 [0001bc5940 - 0001bc59a0] BOOTMEM [ 0.000000] #53 [0001bc7000 - 0001bcf000] BOOTMEM [ 0.000000] #54 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #55 [0004000000 - 0008000000] BOOTMEM [ 0.000000] #56 [0001bcf000 - 0001bef000] BOOTMEM [ 0.000000] #57 [0001c1a000 - 0001c5a000] BOOTMEM [ 0.000000] #58 [000000f440 - 0000017440] BOOTMEM [ 0.000000] Memory: 3989028k/4718592k available (5328k kernel code, 524872k absent, 204692k reserved, 5594k data, 540k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled, bootconsole disabled [ 0.000000] Linux version 2.6.34 (root@treogen) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP Mon May 17 05:55:19 CEST 2010 [ 0.000000] Command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] RAMDISK: 37ec8000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dffde000 00040 [ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000 [ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000001bb6240 - 0000000001bb823f] [ 0.000000] Initmem setup node 1 0000000080000000-0000000120000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100001fff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 1: 0x00080000 -> 0x000dffd0 [ 0.000000] 1: 0x00100000 -> 0x00120000 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001c00000 s76520 r8192 d21784 u1048576 [ 0.000000] pcpu-alloc: s76520 r8192 d21784 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032302 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: fastboot earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty1 crypt_root=/dev/md3 radeon.modeset=1 video=1280x1024 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] Subtract (59 early reservations) [ 0.000000] #1 [0001000000 - 0001bb5798] TEXT DATA BSS [ 0.000000] #2 [0037ec8000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001bb6000 - 0001bb6238] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009fc00 - 00000f16f0] BIOS reserved [ 0.000000] #7 [00000f188c - 00000ff780] BIOS reserved [ 0.000000] #8 [00000f16f0 - 00000f188c] MP-table mpc [ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #10 [0000008000 - 000000c000] PGTABLE [ 0.000000] #11 [000000c000 - 000000d000] PGTABLE [ 0.000000] #12 [000000d000 - 000000f440] MEMNODEMAP [ 0.000000] #13 [0001bb6240 - 0001bb8240] NODE_DATA [ 0.000000] #14 [0100000000 - 0100002000] NODE_DATA [ 0.000000] #15 [0001bb8240 - 0001bb9240] BOOTMEM [ 0.000000] #16 [0001bb57c0 - 0001bb5940] BOOTMEM [ 0.000000] #17 [0080000000 - 0080000180] BOOTMEM [ 0.000000] #18 [00023ba000 - 00023bb000] BOOTMEM [ 0.000000] #19 [00023bb000 - 00023bc000] BOOTMEM [ 0.000000] #20 [0002400000 - 0004000000] MEMMAP 0 [ 0.000000] #21 [0100200000 - 0102000000] MEMMAP 1 [ 0.000000] #22 [0001bb5940 - 0001bb5ac0] BOOTMEM [ 0.000000] #23 [0001bb9240 - 0001bc5240] BOOTMEM [ 0.000000] #24 [0080000180 - 008000c180] BOOTMEM [ 0.000000] #25 [008000c180 - 008000f180] BOOTMEM [ 0.000000] #26 [0001bc6000 - 0001bc7000] BOOTMEM [ 0.000000] #27 [0001bb5ac0 - 0001bb5b01] BOOTMEM [ 0.000000] #28 [0001bb5b40 - 0001bb5b83] BOOTMEM [ 0.000000] #29 [0001bb5bc0 - 0001bb5e28] BOOTMEM [ 0.000000] #30 [0001bb5e40 - 0001bb5ea8] BOOTMEM [ 0.000000] #31 [0001bb5ec0 - 0001bb5f28] BOOTMEM [ 0.000000] #32 [0001bb5f40 - 0001bb5fa8] BOOTMEM [ 0.000000] #33 [0001bc5240 - 0001bc52a8] BOOTMEM [ 0.000000] #34 [0001bc52c0 - 0001bc5328] BOOTMEM [ 0.000000] #35 [0001bc5340 - 0001bc53a8] BOOTMEM [ 0.000000] #36 [0001bc53c0 - 0001bc5428] BOOTMEM [ 0.000000] #37 [0001bc5440 - 0001bc54a8] BOOTMEM [ 0.000000] #38 [0001bc54c0 - 0001bc5528] BOOTMEM [ 0.000000] #39 [0001bc5540 - 0001bc55a8] BOOTMEM [ 0.000000] #40 [0001bc55c0 - 0001bc5640] BOOTMEM [ 0.000000] #41 [0001bc5640 - 0001bc56c0] BOOTMEM [ 0.000000] #42 [0001c00000 - 0001c1a000] BOOTMEM [ 0.000000] #43 [0001d00000 - 0001d1a000] BOOTMEM [ 0.000000] #44 [0080200000 - 008021a000] BOOTMEM [ 0.000000] #45 [0080300000 - 008031a000] BOOTMEM [ 0.000000] #46 [0001bb5fc0 - 0001bb5fd0] BOOTMEM [ 0.000000] #47 [0001bc56c0 - 0001bc56d0] BOOTMEM [ 0.000000] #48 [0001bc5700 - 0001bc5710] BOOTMEM [ 0.000000] #49 [0001bc5740 - 0001bc5760] BOOTMEM [ 0.000000] #50 [0001bc5780 - 0001bc58c0] BOOTMEM [ 0.000000] #51 [0001bc58c0 - 0001bc5920] BOOTMEM [ 0.000000] #52 [0001bc5940 - 0001bc59a0] BOOTMEM [ 0.000000] #53 [0001bc7000 - 0001bcf000] BOOTMEM [ 0.000000] #54 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #55 [0004000000 - 0008000000] BOOTMEM [ 0.000000] #56 [0001bcf000 - 0001bef000] BOOTMEM [ 0.000000] #57 [0001c1a000 - 0001c5a000] BOOTMEM [ 0.000000] #58 [000000f440 - 0000017440] BOOTMEM [ 0.000000] Memory: 3989028k/4718592k available (5328k kernel code, 524872k absent, 204692k reserved, 5594k data, 540k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2599.983 MHz processor. [ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.96 BogoMIPS (lpj=25999830) [ 0.030018] Security Framework initialized [ 0.034374] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.042406] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.051165] Mount-cache hash table entries: 256 [ 0.056407] CPU: Physical Processor ID: 0 [ 0.060003] CPU: Processor Core ID: 0 [ 0.063668] mce: CPU supports 5 MCE banks [ 0.070007] using C1E aware idle routine [ 0.073929] Performance Events: AMD PMU driver. [ 0.078488] ... version: 0 [ 0.080001] ... bit width: 48 [ 0.084103] ... generic registers: 4 [ 0.090001] ... value mask: 0000ffffffffffff [ 0.095314] ... max period: 00007fffffffffff [ 0.100001] ... fixed-purpose events: 0 [ 0.104008] ... event mask: 000000000000000f [ 0.110023] Freeing SMP alternatives: 36k freed [ 0.114570] ACPI: Core revision 20100121 [ 0.128144] Setting APIC routing to flat [ 0.130427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.238694] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 [ 0.250000] Booting Node 0, Processors #1 Ok. [ 0.400635] Booting Node 1, Processors #2 #3 Ok. [ 0.720033] Brought up 4 CPUs [ 0.723008] Total of 4 processors activated (20800.07 BogoMIPS). [ 0.730052] NET: Registered protocol family 16 [ 0.734508] TOM: 00000000e0000000 aka 3584M [ 0.734508] TOM2: 0000000120000000 aka 4608M [ 0.740016] ACPI: bus type pci registered [ 0.744036] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.750002] PCI: not using MMCONFIG [ 0.760001] PCI: Using configuration type 1 for base access [ 0.770046] bio: create slab at 0 [ 0.781543] ACPI: Executed 1 blocks of module-level executable AML code [ 0.794838] ACPI: Interpreter enabled [ 0.798506] ACPI: (supports S0 S5) [ 0.800597] ACPI: Using IOAPIC for interrupt routing [ 0.805605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.824342] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources [ 0.830001] PCI: not using MMCONFIG [ 0.840670] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E7 (20100121/tbutils-314) [ 0.857020] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.860251] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.871032] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.880141] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.890007] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.910008] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.930007] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.935343] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.940005] pci 0000:00:0f.0: PCI bridge to [bus 01-01] [ 0.960269] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.966734] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.972955] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.981452] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.989112] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.992060] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 1.002047] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 1.010090] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 [ 1.016582] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 1.022039] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 1.030377] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 1.036951] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 1.042948] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 1.051458] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 1.058046] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 1.061962] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 1.071087] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 1.077707] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 1.082948] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 1.091626] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.098099] vgaarb: loaded [ 1.100062] SCSI subsystem initialized [ 1.103775] usbcore: registered new interface driver usbfs [ 1.110011] usbcore: registered new interface driver hub [ 1.115509] usbcore: registered new device driver usb [ 1.120016] Advanced Linux Sound Architecture Driver Version 1.0.22.1. [ 1.126531] PCI: Using ACPI for IRQ routing [ 1.130081] NetLabel: Initializing [ 1.133427] NetLabel: domain hash size = 128 [ 1.140001] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.144973] NetLabel: unlabeled traffic allowed by default [ 1.150004] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.157051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.161089] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 1.200028] Switching to clocksource hpet [ 1.204054] Slow work thread pool: Starting up [ 1.204645] Slow work thread pool: Ready [ 1.208627] FS-Cache: Loaded [ 1.211602] CacheFiles: Loaded [ 1.214686] pnp: PnP ACPI init [ 1.217758] ACPI: bus type pnp registered [ 1.226787] pnp: PnP ACPI: found 14 devices [ 1.230979] ACPI: ACPI bus type pnp unregistered [ 1.235639] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.241699] system 00:06: [io 0x07b0-0x07df] has been reserved [ 1.247652] system 00:06: [io 0x0800-0x080f] has been reserved [ 1.253588] system 00:06: [io 0x0bb0-0x0bdf] has been reserved [ 1.259509] system 00:06: [io 0x2000-0x207f] has been reserved [ 1.265462] system 00:06: [io 0x2080-0x20ff] has been reserved [ 1.271382] system 00:06: [io 0x2400-0x247f] has been reserved [ 1.277337] system 00:06: [io 0x2480-0x24ff] has been reserved [ 1.283273] system 00:06: [io 0x2800-0x287f] has been reserved [ 1.289191] system 00:06: [io 0x2880-0x28ff] has been reserved [ 1.295137] system 00:06: [io 0x2c00-0x2c7f] has been reserved [ 1.301058] system 00:06: [io 0x2c80-0x2cff] has been reserved [ 1.307195] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved [ 1.314438] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved [ 1.321655] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved [ 1.328912] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved [ 1.335540] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved [ 1.342153] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved [ 1.348803] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 1.355434] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.362396] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.369207] system 00:0c: [io 0x0290-0x0297] has been reserved [ 1.375149] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.382104] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved [ 1.388754] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.395731] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.402709] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.415187] pci 0000:00:06.0: PCI bridge to [bus 05-05] [ 1.420417] pci 0000:00:06.0: bridge window [io disabled] [ 1.426109] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff] [ 1.433026] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref] [ 1.440249] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 1.445513] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 1.451605] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff] [ 1.458426] pci 0000:00:0b.0: bridge window [mem pref disabled] [ 1.464536] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 1.469762] pci 0000:00:0c.0: bridge window [io disabled] [ 1.475449] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff] [ 1.482231] pci 0000:00:0c.0: bridge window [mem pref disabled] [ 1.488362] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 1.493733] pci 0000:00:0d.0: bridge window [io disabled] [ 1.499393] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff] [ 1.506213] pci 0000:00:0d.0: bridge window [mem pref disabled] [ 1.512308] pci 0000:00:0f.0: PCI bridge to [bus 01-01] [ 1.517566] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff] [ 1.523682] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff] [ 1.530471] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref] [ 1.538332] NET: Registered protocol family 2 [ 1.542861] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.551657] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.564099] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.571349] TCP: Hash tables configured (established 524288 bind 65536) [ 1.578005] TCP reno registered [ 1.581177] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.587261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.593860] NET: Registered protocol family 1 [ 1.598392] RPC: Registered udp transport module. [ 1.603120] RPC: Registered tcp transport module. [ 1.607833] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.635988] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.641518] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.647073] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.652620] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.658151] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.663717] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.669261] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.674835] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.680377] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.685985] Unpacking initramfs... [ 1.712046] Freeing initrd memory: 1184k freed [ 1.717280] PCI-DMA: Disabling AGP. [ 1.721037] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.726627] PCI-DMA: using GART IOMMU. [ 1.730388] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.743161] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.752880] VFS: Disk quotas dquot_6.5.2 [ 1.757517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.764145] FS-Cache: Netfs 'nfs' registered for caching [ 1.769738] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.779477] SGI XFS Quota Management subsystem [ 1.783943] msgmni has been set to 7922 [ 1.788729] alg: No test for stdrng (krng) [ 1.796919] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 1.802978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.810377] io scheduler noop registered [ 1.814473] io scheduler cfq registered (default) [ 1.820227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.828604] ACPI: Power Button [PWRB] [ 1.832370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.839787] ACPI: Power Button [PWRF] [ 1.847686] Real Time Clock Driver v1.12b [ 1.851969] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.860950] Hangcheck: Using get_cycles(). [ 1.865127] [drm] Initialized drm 1.1.0 20060810 [ 1.869805] [drm] radeon kernel modesetting enabled. [ 1.875123] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 1.880895] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 1.891334] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60). [ 1.898194] [drm] register mmio base: 0xEFBF0000 [ 1.902831] [drm] register mmio size: 65536 [ 1.907716] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 1.913403] [drm] 1 Power State(s) [ 1.916810] [drm] State 0 Default (default) [ 1.921017] [drm] 16 PCIE Lanes [ 1.924255] [drm] 1 Clock Mode(s) [ 1.927662] [drm] 0 engine/memory: 325000/200000 [ 1.932496] [drm] radeon: power management initialized [ 1.937644] [drm] Generation 2 PCI interface, using max accessible memory [ 1.944456] radeon 0000:01:00.0: VRAM: 128M 0xE0000000 - 0xE7FFFFFF (128M used) [ 1.951775] radeon 0000:01:00.0: GTT: 512M 0xC0000000 - 0xDFFFFFFF [ 1.957992] [drm] radeon: using MSI. [ 1.961614] [drm] radeon: irq initialized. [ 1.966591] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.971425] [drm] RAM width 64bits DDR [ 1.975265] [TTM] Zone kernel: Available graphics memory: 2028098 kiB. [ 1.981907] [drm] radeon: 128M of VRAM memory ready [ 1.986783] [drm] radeon: 512M of GTT memory ready. [ 1.991700] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.999124] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 2.005749] [drm] PCIE GART of 512M enabled (table at 0xE0040000). [ 2.011963] [drm] radeon: cp idle (0x10000C03) [ 2.016533] [drm] Loading R300 Microcode [ 2.020478] platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin [ 2.028553] [drm] radeon: ring at 0x00000000C0000000 [ 2.033555] [drm] ring test succeeded in 1 usecs [ 2.038266] [drm] radeon: ib pool ready. [ 2.042272] [drm] ib test succeeded in 0 usecs [ 2.046925] [drm] Default TV standard: NTSC [ 2.051131] [drm] 27.000000000 MHz TV ref clk [ 2.055496] [drm] DFP table revision: 4 [ 2.059502] [drm] Default TV standard: NTSC [ 2.063706] [drm] 27.000000000 MHz TV ref clk [ 2.068170] [drm] Radeon Display Connectors [ 2.072373] [drm] Connector 0: [ 2.075436] [drm] VGA [ 2.077894] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.083925] [drm] Encoders: [ 2.086904] [drm] CRT1: INTERNAL_DAC1 [ 2.090935] [drm] Connector 1: [ 2.094002] [drm] DVI-I [ 2.096629] [drm] HPD1 [ 2.099174] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 2.105210] [drm] Encoders: [ 2.108189] [drm] CRT2: INTERNAL_DAC2 [ 2.112222] [drm] DFP1: INTERNAL_TMDS1 [ 2.116325] [drm] Connector 2: [ 2.119386] [drm] S-video [ 2.122217] [drm] Encoders: [ 2.125193] [drm] TV1: INTERNAL_DAC2 [ 2.256925] [drm] fb mappable at 0xE00C0000 [ 2.261142] [drm] vram apper at 0xE0000000 [ 2.265244] [drm] size 5242880 [ 2.268306] [drm] fb depth is 24 [ 2.271567] [drm] pitch is 5120 [ 2.275077] fbcon: radeondrmfb (fb0) is primary device [ 2.394893] Console: switching to colour frame buffer device 160x64 [ 2.407457] fb0: radeondrmfb frame buffer device [ 2.412122] registered panic notifier [ 2.415804] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0 [ 2.423293] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.429841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.436209] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.442279] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 2.451151] scsi0 : sata_sil24 [ 2.454391] scsi1 : sata_sil24 [ 2.457579] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 19 [ 2.464942] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 19 [ 2.472729] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 2.478511] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 2.486857] sata_nv 0000:00:05.0: Using SWNCQ mode [ 2.491830] scsi2 : sata_nv [ 2.494774] scsi3 : sata_nv [ 2.497793] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23 [ 2.504989] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23 [ 2.512514] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 2.518298] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 2.526639] sata_nv 0000:00:05.1: Using SWNCQ mode [ 2.531620] scsi4 : sata_nv [ 2.534558] scsi5 : sata_nv [ 2.537566] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22 [ 2.544761] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22 [ 2.552272] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 [ 2.558058] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21 [ 2.566400] sata_nv 0000:00:05.2: Using SWNCQ mode [ 2.571376] scsi6 : sata_nv [ 2.574321] scsi7 : sata_nv [ 2.577328] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21 [ 2.584524] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21 [ 2.591949] scsi8 : pata_amd [ 2.594980] scsi9 : pata_amd [ 2.598876] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.605886] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.613157] tg3.c:v3.108 (February 17, 2010) [ 2.617704] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 2.623516] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 2.685375] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5 [ 2.697552] tg3 0000:03:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.708132] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.717641] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.726381] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 [ 2.734055] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17 [ 2.784279] tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea [ 2.796771] tg3 0000:02:00.0: eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.807635] tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.817342] tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.826333] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 2.834268] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 [ 2.890341] ata5: SATA link down (SStatus 0 SControl 300) [ 2.910040] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[effff800-efffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.934154] ata7: SATA link down (SStatus 0 SControl 300) [ 2.942395] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0) [ 2.950173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.959381] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 2.967544] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 2.978249] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.985993] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.996053] ehci_hcd 0000:00:02.1: debug port 1 [ 3.000054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.011252] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00 [ 3.040011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.048130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.057074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.066226] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133 [ 3.066229] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.084512] usb usb1: Product: EHCI Host Controller [ 3.092075] usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd [ 3.099706] usb usb1: SerialNumber: 0000:00:02.1 [ 3.106716] hub 1-0:1.0: USB hub found [ 3.112775] hub 1-0:1.0: 10 ports detected [ 3.119385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.128372] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 3.136547] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 3.147387] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 3.149532] ata3.00: configured for UDMA/133 [ 3.161415] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.171464] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000 [ 3.242018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.251100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.260589] usb usb2: Product: OHCI Host Controller [ 3.268177] usb usb2: Manufacturer: Linux 2.6.34 ohci_hcd [ 3.276173] usb usb2: SerialNumber: 0000:00:02.0 [ 3.283357] hub 2-0:1.0: USB hub found [ 3.289400] hub 2-0:1.0: 10 ports detected [ 3.295854] Initializing USB Mass Storage driver... [ 3.303183] usbcore: registered new interface driver usb-storage [ 3.311507] USB Mass Storage support registered. [ 3.318876] usbcore: registered new interface driver libusual [ 3.327353] usbcore: registered new interface driver ums-alauda [ 3.335697] usbcore: registered new interface driver ums-cypress [ 3.344140] usbcore: registered new interface driver ums-datafab [ 3.352625] usbcore: registered new interface driver ums-freecom [ 3.360983] usbcore: registered new interface driver ums-isd200 [ 3.369397] usbcore: registered new interface driver ums-jumpshot [ 3.378106] usbcore: registered new interface driver ums-karma [ 3.386102] usbcore: registered new interface driver ums-sddr09 [ 3.394181] usbcore: registered new interface driver ums-sddr55 [ 3.402373] usbcore: registered new interface driver ums-usbat [ 3.410328] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.422340] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.429474] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.436580] mice: PS/2 mouse device common for all mice [ 3.444095] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.452773] I2O subsystem v1.325 [ 3.458070] i2o: max drivers = 8 [ 3.463846] i2c /dev entries driver [ 3.464640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.480250] i2c i2c-2: nForce2 SMBus adapter at 0x2a00 [ 3.487244] i2c i2c-3: nForce2 SMBus adapter at 0x2a80 [ 3.494230] Linux video capture interface: v2.00 [ 3.501157] bttv: driver version 0.9.18 loaded [ 3.507419] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 3.516454] bttv: Bt8xx card found (0). [ 3.522442] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 [ 3.530083] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 3.539791] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000 [ 3.550073] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 3.559573] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 3.567769] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 3.579053] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 3.616030] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813 [ 3.624963] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5) [ 3.633741] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04) [ 3.633768] usb 2-6: new low speed USB device using ohci_hcd and address 2 [ 3.650278] tveeprom 4-0050: audio processor is MSP3415 (idx 6) [ 3.657936] tveeprom 4-0050: has radio [ 3.663746] bttv0: Hauppauge eeprom indicates model#61344 [ 3.670895] bttv0: tuner type=5 [ 3.686104] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) [ 3.694347] msp3400 4-0040: msp3400 supports nicam, mode is autodetect [ 3.714923] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 3.722812] tuner-simple 4-0061: creating new instance [ 3.729714] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 3.740398] bttv0: registered device video0 [ 3.746712] bttv0: registered device vbi0 [ 3.752700] bttv0: registered device radio0 [ 3.767505] bttv0: PLL: 28636363 => 35468950 .. ok [ 3.811034] usb 2-6: New USB device found, idVendor=062a, idProduct=0000 [ 3.811037] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.832682] input: i2c IR (Hauppauge) as /devices/virtual/input/input4 [ 3.841136] Creating IR device irrcv0 [ 3.846753] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]] [ 4.693782] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 4.703824] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 4.708127] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7 [ 4.708129] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.714574] ata1.00: configured for UDMA/100 [ 4.714684] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 4.714966] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 4.715033] sd 0:0:0:0: [sda] Write Protect is off [ 4.715053] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.715170] sda: sda1 sda2 sda3 [ 4.780219] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 [ 4.790559] md: raid1 personality registered for level 1 [ 4.790710] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.805007] device-mapper: uevent: version 1.0.3 [ 4.812227] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 4.823060] EDAC MC: Ver: 2.1.0 May 17 2010 [ 4.829759] EDAC amd64_edac: Ver: 3.3.0 May 17 2010 [ 4.836899] EDAC amd64: ECC is enabled by BIOS. [ 4.843676] EDAC amd64: ECC is enabled by BIOS. [ 4.850849] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 4.860624] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 [ 4.870465] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 4.884208] cpuidle: using governor ladder [ 4.890577] cpuidle: using governor menu [ 4.898350] usbcore: registered new interface driver hiddev [ 4.912323] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5 [ 4.923730] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-6/input0 [ 4.937411] usbcore: registered new interface driver usbhid [ 4.945348] usbhid: USB HID core driver [ 4.951946] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 4.962679] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 4.971774] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 4.979931] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 4.990667] hda_intel: Disable MSI for Nvidia chipset [ 6.360389] ALSA device list: [ 6.365824] #0: HDA NVidia at 0xefafc000 irq 22 [ 6.373216] #1: Brooktree Bt878 at 0xeeffe000, irq 19 [ 6.381026] Initializing XFRM netlink socket [ 6.387658] NET: Registered protocol family 17 [ 6.394295] NET: Registered protocol family 15 [ 6.401415] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00) [ 6.414525] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 6.422820] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 6.430710] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 6.438477] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 6.446236] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 6.454234] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 6.462318] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 6.470083] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 6.478053] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 6.485919] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 6.493734] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 6.501809] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 6.940041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 6.956874] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7 [ 6.967362] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.985078] ata2.00: configured for UDMA/100 [ 6.993919] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 7.006997] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 7.007307] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5 [ 7.007760] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 7.007864] sd 2:0:0:0: [sdc] Write Protect is off [ 7.007950] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.008208] sdc: sdc1 sdc2 [ 7.073381] Clocksource tsc unstable (delta = -334379398 ns) [ 7.074463] sd 2:0:0:0: [sdc] Attached SCSI disk [ 7.092611] sd 1:0:0:0: [sdb] Write Protect is off [ 7.101789] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.115467] sdb: sdb1 sdb2 sdb3 [ 7.138591] sd 1:0:0:0: [sdb] Attached SCSI disk [ 7.350458] ata4: SATA link down (SStatus 0 SControl 300) [ 7.700468] ata6: SATA link down (SStatus 0 SControl 300) [ 8.061543] ata8: SATA link down (SStatus 0 SControl 300) [ 8.069085] Freeing unused kernel memory: 540k freed [ 8.079109] Write protecting the kernel read-only data: 10240k [ 8.089447] Freeing unused kernel memory: 796k freed [ 8.099694] Freeing unused kernel memory: 1760k freed