linux-kernel - Re: [PATCH 3/3] [tgt]: Add BSG v4 backstore support to usr/bs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1275903449.26888.69.camel@haakon2.linux-iscsi.org>
Date:	Mon, 07 Jun 2010 02:37:29 -0700
From:	"Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To:	Boaz Harrosh <bharrosh@...asas.com>
Cc:	stgt-devel <stgt@...r.kernel.org>,
	linux-scsi <linux-scsi@...r.kernel.org>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
	Mike Christie <michaelc@...wisc.edu>,
	James Bottomley <James.Bottomley@...e.de>,
	Douglas Gilbert <dgilbert@...erlog.com>
Subject: Re: [PATCH 3/3] [tgt]: Add BSG v4 backstore support to usr/bs_sg.c

On Mon, 2010-06-07 at 12:27 +0300, Boaz Harrosh wrote:
> On 06/07/2010 12:02 PM, Nicholas A. Bellinger wrote:
> > On Mon, 2010-06-07 at 11:40 +0300, Boaz Harrosh wrote:
> >> On 06/07/2010 06:50 AM, Nicholas A. Bellinger wrote:
> >>> From: Nicholas Bellinger <nab@...ux-iscsi.org>
> >>>
> >>> This patch adds initial support for the block layer implementation of the sg v4 interface
> >>> (BSG) -> STGT with a new struct backingstore_template bsg_bst sharing code with the
> >>> original sg_bst.  It adds for new function bs_bsg_cmd_submit() for incoming write I/O
> >>> and bs_bsg_cmd_complete() for polling read I/O using include/linux/bsg.h:struct sg_io_v4.
> >>>
> >>> This patch also splits up bs_sg_open() to support both BSG and SG looking for the
> >>> path "/dev/bsg" in bs_sg_open(), and getting max_queue using SG_GET_COMMAND_Q and
> >>> calling SG_SET_RESERVED_SIZE (following the original bs_sg code in init_sg_device)
> >>>
> >>> Also chk_bsg_device() currently using a hardcoded 254 major as def for BSG does not
> >>> appear in include/linux/major.h just yet..
> >>>
> >>> So far this has been tested with STGT/iSCSI <-> BSG <-> TCM_Loop SPC-4 iSCSI Target
> >>> Port emulation and is able to mkfs, fsck and mount a filesystem from a TCM/IBLOCK
> >>> Linux LVM kernel level backstore
> >>>
> >>> Signed-off-by: Nicholas A. Bellinger <nab@...ux-iscsi.org>
> >>> ---
> >>>  usr/bs_sg.c     |  178 +++++++++++++++++++++++++++++++++++++++++++++++++++---
> >>>  usr/scsi_cmnd.h |    7 ++
> >>>  2 files changed, 175 insertions(+), 10 deletions(-)
> >>>
> >>> diff --git a/usr/bs_sg.c b/usr/bs_sg.c
> >>> index 23676ef..d071714 100644
> >>> --- a/usr/bs_sg.c
> >>> +++ b/usr/bs_sg.c
> > 
> > <SNIP>
> > 
> >>> +
> >>> +static int bs_bsg_cmd_submit(struct scsi_cmd *cmd)
> >>> +{
> >>> +	struct scsi_lu *dev = cmd->dev;
> >>> +	int fd = dev->fd;
> >>> +	struct sg_io_v4 *io_hdr = &cmd->cmd_bsg_hdr;
> >>> +	int err = 0;
> >>> +	/*
> >>> +	 * Following linux/include/linux/bsg.h
> >>> +	 */
> >>> +	/* [i] 'Q' to differentiate from v3 */
> >>> +	io_hdr->guard = 'Q';
> >>> +	io_hdr->protocol = BSG_PROTOCOL_SCSI;
> >>> +	io_hdr->subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD;
> >>> +	io_hdr->request_len = cmd->scb_len;
> >>> +	io_hdr->request = (unsigned long )cmd->scb;
> >>> +
> >>> +	if (scsi_get_data_dir(cmd) == DATA_WRITE) {
> >>
> >> Why the if? both sides are fully bidi just remove the ifs
> >> and: OUT <= OUT, IN <= IN
> >>
> > 
> > Whoops, thanks for pointing this one out (again).  Tested with
> > unidirection commands and included into my local tgt.git/pass that I
> > will send along to Tomo-san..
> > 
> > Btw, I still need to sort out BIDI support for TCM_Loop at some point in
> > the not too distant future.  What would be a good way to generate BIDI
> > traffic into STGT or a local SCSI LLD..?
> 
> scsi_debug has some emulation for XOR commands, does that help?
> 

Great, thanks for the pointer on the LLD side.  Is there any userspace
code around that will generate XDWRITEREAD_* CDBs for bulk I/O or do I
need to code this part myself..?

Best,

--nab

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/