| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 9 Jun 2010 13:22:14 +0200
From: Christoph Egger <siccegge@...fau.de>
To: Ralf Baechle <ralf@...ux-mips.org>, linux-mips@...ux-mips.org,
linux-kernel@...r.kernel.org
Cc: vamos@...informatik.uni-erlangen.de
Subject: [PATCH 6/9] Removing dead CONFIG_I2C_PNX0105
CONFIG_I2C_PNX0105 doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@...fau.de>
---
arch/mips/nxp/pnx833x/common/platform.c | 73 -------------------------------
1 files changed, 0 insertions(+), 73 deletions(-)
diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c
index 01f8345..2698d19 100644
--- a/arch/mips/nxp/pnx833x/common/platform.c
+++ b/arch/mips/nxp/pnx833x/common/platform.c
@@ -33,11 +33,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#ifdef CONFIG_I2C_PNX0105
-/* Until i2c driver available in kernel.*/
-#include <linux/i2c-pnx0105.h>
-#endif
-
#include <irq.h>
#include <irq-mapping.h>
#include <pnx833x.h>
@@ -134,70 +129,6 @@ static struct platform_device pnx833x_usb_ehci_device = {
.resource = pnx833x_usb_ehci_resources,
};
-#ifdef CONFIG_I2C_PNX0105
-static struct resource pnx833x_i2c0_resources[] = {
- {
- .start = PNX833X_I2C0_PORTS_START,
- .end = PNX833X_I2C0_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PNX833X_PIC_I2C0_INT,
- .end = PNX833X_PIC_I2C0_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource pnx833x_i2c1_resources[] = {
- {
- .start = PNX833X_I2C1_PORTS_START,
- .end = PNX833X_I2C1_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PNX833X_PIC_I2C1_INT,
- .end = PNX833X_PIC_I2C1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
- {
- .base = PNX833X_I2C0_PORTS_START,
- .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
- .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */
- .bus_addr = 0, /* no slave support */
- },
- {
- .base = PNX833X_I2C1_PORTS_START,
- .irq = -1, /* on high freq, polling is faster */
- /*.irq = PNX833X_PIC_I2C1_INT,*/
- .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
- .bus_addr = 0, /* no slave support */
- },
-};
-
-static struct platform_device pnx833x_i2c0_device = {
- .name = "i2c-pnx0105",
- .id = 0,
- .dev = {
- .platform_data = &pnx833x_i2c_dev[0],
- },
- .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
- .resource = pnx833x_i2c0_resources,
-};
-
-static struct platform_device pnx833x_i2c1_device = {
- .name = "i2c-pnx0105",
- .id = 1,
- .dev = {
- .platform_data = &pnx833x_i2c_dev[1],
- },
- .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
- .resource = pnx833x_i2c1_resources,
-};
-#endif
-
static u64 ethernet_dmamask = DMA_BIT_MASK(32);
static struct resource pnx833x_ethernet_resources[] = {
@@ -297,10 +228,6 @@ static struct platform_device pnx833x_flash_nand = {
static struct platform_device *pnx833x_platform_devices[] __initdata = {
&pnx833x_uart_device,
&pnx833x_usb_ehci_device,
-#ifdef CONFIG_I2C_PNX0105
- &pnx833x_i2c0_device,
- &pnx833x_i2c1_device,
-#endif
&pnx833x_ethernet_device,
&pnx833x_sata_device,
&pnx833x_flash_nand,
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists