| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1276270006-1431-1-git-send-email-linus.walleij@stericsson.com>
Date: Fri, 11 Jun 2010 17:26:46 +0200
From: Linus Walleij <linus.walleij@...ricsson.com>
To: Dan Williams <dan.j.williams@...el.com>,
<linux-arm-kernel@...ts.infradead.org>, <yuanyabin1978@...a.com>
Cc: <linux-kernel@...r.kernel.org>,
Linus Walleij <linus.walleij@...ricsson.com>
Subject: [PATCH 03/13] DMAENGINE: add generic PrimeCell interface to DMA40 v2
This extends the DMA engine driver for the DMA40 used in the
U8500 platform with the generic PrimeCell interface.
Signed-off-by: Linus Walleij <linus.walleij@...ricsson.com>
---
drivers/dma/ste_dma40.c | 125 +++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 121 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index c426829..c1b278f 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/amba/dma.h>
#include <plat/ste_dma40.h>
@@ -205,6 +206,9 @@ struct d40_chan {
struct d40_def_lcsp log_def;
struct d40_lcla_elem lcla;
struct d40_log_lli_full *lcpa;
+ /* AMBA extensions */
+ dma_addr_t amba_addr;
+ enum dma_data_direction amba_direction;
};
/**
@@ -1890,7 +1894,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
lli_max = 1;
if (direction == DMA_FROM_DEVICE) {
- dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+ if (d40c->amba_addr)
+ dev_addr = d40c->amba_addr;
+ else
+ dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
total_size = d40_log_sg_to_dev(&d40c->lcla,
sgl, sg_len,
&d40d->lli_log,
@@ -1902,7 +1909,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
dev_addr, lli_max,
d40c->base->plat_data->llis_per_log);
} else if (direction == DMA_TO_DEVICE) {
- dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+ if (d40c->amba_addr)
+ dev_addr = d40c->amba_addr;
+ else
+ dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
total_size = d40_log_sg_to_dev(&d40c->lcla,
sgl, sg_len,
&d40d->lli_log,
@@ -1943,9 +1953,15 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d,
if (direction == DMA_FROM_DEVICE) {
dst_dev_addr = 0;
- src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+ if (d40c->amba_addr)
+ src_dev_addr = d40c->amba_addr;
+ else
+ src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
} else if (direction == DMA_TO_DEVICE) {
- dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+ if (d40c->amba_addr)
+ dst_dev_addr = d40c->amba_addr;
+ else
+ dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
src_dev_addr = 0;
} else
return -EINVAL;
@@ -2065,6 +2081,103 @@ static void d40_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&d40c->lock, flags);
}
+/* PrimeCell DMA extension */
+static void d40_set_ambaconfig(struct dma_chan *chan,
+ struct amba_dma_channel_config *config)
+{
+ struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
+ struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
+ enum stedma40_periph_data_width addr_width;
+ int psize;
+
+ switch (config->addr_width) {
+ case 1:
+ addr_width = STEDMA40_BYTE_WIDTH;
+ break;
+ case 2:
+ addr_width = STEDMA40_HALFWORD_WIDTH;
+ break;
+ case 4:
+ addr_width = STEDMA40_WORD_WIDTH;
+ break;
+ case 8:
+ addr_width = STEDMA40_DOUBLEWORD_WIDTH;
+ break;
+ default:
+ dev_err(d40c->base->dev,
+ "illegal peripheral address width requested (%d)\n",
+ config->addr_width);
+ return;
+ }
+
+ if (config->maxburst >= 16)
+ psize = STEDMA40_PSIZE_LOG_16;
+ else if (config->maxburst >= 8)
+ psize = STEDMA40_PSIZE_LOG_8;
+ else if (config->maxburst >= 4)
+ psize = STEDMA40_PSIZE_LOG_4;
+ else
+ psize = STEDMA40_PSIZE_LOG_1;
+
+ if (config->direction == DMA_FROM_DEVICE) {
+ dma_addr_t dev_addr_rx =
+ d40c->base->plat_data->dev_rx[cfg->src_dev_type];
+
+ if (dev_addr_rx)
+ dev_warn(d40c->base->dev,
+ "channel has a pre-wired RX address %08x "
+ "overriding with %08x\n",
+ dev_addr_rx, config->addr);
+ if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
+ dev_warn(d40c->base->dev,
+ "channel was not configured for peripheral "
+ "to memory transfer (%d) overriding\n",
+ cfg->dir);
+ cfg->dir = STEDMA40_PERIPH_TO_MEM;
+ } else if (config->direction == DMA_TO_DEVICE) {
+ dma_addr_t dev_addr_tx =
+ d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
+
+ if (dev_addr_tx)
+ dev_warn(d40c->base->dev,
+ "channel has a pre-wired TX address %08x "
+ "overriding with %08x\n",
+ dev_addr_tx, config->addr);
+ if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
+ dev_warn(d40c->base->dev,
+ "channel was not configured for memory "
+ "to peripheral transfer (%d) overriding\n",
+ cfg->dir);
+ cfg->dir = STEDMA40_MEM_TO_PERIPH;
+ } else {
+ dev_err(d40c->base->dev,
+ "unrecognized channel direction %d\n",
+ config->direction);
+ return;
+ }
+
+ /* Set up all the endpoint configs */
+ cfg->src_info.data_width = addr_width;
+ cfg->src_info.psize = psize;
+ cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+ cfg->dst_info.data_width = addr_width;
+ cfg->dst_info.psize = psize;
+ cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+
+ /* These settings will take precedence later */
+ d40c->amba_addr = config->addr;
+ d40c->amba_direction = config->direction;
+ dev_dbg(d40c->base->dev,
+ "configured channel %s for %s, data width %d, "
+ "maxburst %d bytes, LE, no flow control\n",
+ dma_chan_name(chan),
+ (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+ config->addr_width,
+ config->maxburst);
+}
+
static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
@@ -2081,6 +2194,10 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
return d40_pause(chan);
case DMA_RESUME:
return d40_resume(chan);
+ case DMA_CONFIG_AMBA:
+ d40_set_ambaconfig(chan,
+ (struct amba_dma_channel_config *) arg);
+ return 0;
}
/* Other commands are unimplemented */
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists