| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 12 Jun 2010 01:27:45 -0400 (EDT)
From: Len Brown <lenb@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-acpi@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [git pull request] ACPI patches for 2.6.35-rc3
Hi Linus,
please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git release
A few significant fixes here:
Rafael fixes a pair of GPE regressions, one from -rc1, and another
going back to 2.6.33.
Matthew fixed a pair of Windows compatibility issues,
one related to IO ports, and another related to resume and NVS.
Plus a couple of less significant fixes.
This will update the files shown below.
thanks!
--
Len Brown
Intel Open Source Technology Center
ps. individual patches are available on linux-acpi@...r.kernel.org
and a consolidated plain patch is available here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/2.6.35/acpi-release-20100428-2.6.35-rc3.diff.gz
arch/x86/kernel/e820.c | 2 +-
drivers/acpi/acpi_pad.c | 36 +++++++---
drivers/acpi/acpica/acconfig.h | 4 +
drivers/acpi/acpica/acevents.h | 4 -
drivers/acpi/acpica/acglobal.h | 8 ++
drivers/acpi/acpica/achware.h | 6 ++-
drivers/acpi/acpica/evgpe.c | 115 ++-----------------------------
drivers/acpi/acpica/evgpeblk.c | 14 ++++-
drivers/acpi/acpica/evxface.c | 7 --
drivers/acpi/acpica/evxfevnt.c | 59 ++++++++++++++--
drivers/acpi/acpica/exsystem.c | 8 ++
drivers/acpi/acpica/hwgpe.c | 94 +++++++++++++++++--------
drivers/acpi/acpica/hwvalid.c | 12 +++
drivers/acpi/acpica/nsinit.c | 9 +++
drivers/acpi/blacklist.c | 8 ++
drivers/acpi/fan.c | 3 +-
drivers/acpi/processor_driver.c | 5 ++
drivers/acpi/sleep.c | 34 +++++----
drivers/acpi/system.c | 6 +-
include/acpi/acexcep.h | 2 +-
include/acpi/acpixf.h | 1 +
include/acpi/actypes.h | 3 +-
include/linux/suspend.h | 26 ++++----
init/main.c | 4 +-
kernel/power/Kconfig | 9 ++-
kernel/power/Makefile | 2 +-
kernel/power/{hibernate_nvs.c => nvs.c} | 24 +++---
kernel/power/suspend.c | 6 ++
28 files changed, 289 insertions(+), 222 deletions(-)
rename kernel/power/{hibernate_nvs.c => nvs.c} (80%)
through these commits:
Bob Moore (2):
ACPICA: Fix namestring associated with AE_NO_HANDLER exception
ACPICA: Limit maximum time for Sleep() operator
Chen Gong (1):
ACPI: acpi_pad: Don't needlessly mark LAPIC unstable
Liang Li (1):
ACPI: fan: fix unbalanced code block
Matthew Garrett (3):
suspend: Move NVS save/restore code to generic suspend functionality
ACPI: Store NVS state even when entering suspend to RAM
ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
Rafael J. Wysocki (6):
ACPI / ACPICA: Do not attempt to disable GPE when installing handler
ACPI / ACPICA: Use helper function for computing GPE masks
ACPI / ACPICA: Fix low-level GPE manipulation code
ACPI / ACPICA: Avoid writing full enable masks to GPE registers
ACPI / ACPICA: Fix GPE initialization
ACPI / ACPICA: Fix sysfs GPE interface
Thomas Renninger (1):
ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
Zhang Rui (1):
ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
with this log:
commit c1db9d9bb23814a76cfb2416fd84f32c3fd6d82f
Merge: 42de553 934231d
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 01:16:51 2010 -0400
Merge branch 'misc-2.6.35' into release
commit 42de5532f4a58a52a60bdd8bd4f80f9f210dd65b
Merge: e9e8b4d 2a6b697
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 01:15:40 2010 -0400
Merge branch 'bugzilla-13931-sleep-nvs' into release
Conflicts:
drivers/acpi/sleep.c
Signed-off-by: Len Brown <len.brown@...el.com>
commit e9e8b4dd142da3b6cbf301ba922804d6cdc31a17
Merge: d9a799d 4b1b29b
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 00:58:01 2010 -0400
Merge branch 'bugzilla-102904-workaround' into release
commit d9a799d197da16fcfb1e872e82ee6cdf7fe8f7ab
Merge: a48ecc7 b681f7d
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 00:56:15 2010 -0400
Merge branch 'acpica-cherry-pick' into release
commit b681f7d9ab4d697a214fa4428795790c3a937a89
Author: Matthew Garrett <mjg@...hat.com>
Date: Wed May 26 11:50:48 2010 +0800
ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
This feature is optional and is enabled if the BIOS requests any
Windows OSI strings. It can also be enabled by the host OS.
Signed-off-by: Matthew Garrett <mjg@...hat.com>
Signed-off-by: Bob Moore <robert.moore@...el.com>
Signed-off-by: Lin Ming <ming.m.lin@...el.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit 9cbfa18e8a7b34a32eddbd914a07f085962f50a8
Author: Bob Moore <robert.moore@...el.com>
Date: Wed May 26 11:22:41 2010 +0800
ACPICA: Limit maximum time for Sleep() operator
To prevent accidental deep sleeps, limit the maximum time that
Sleep() will sleep. Configurable, default maximum is two seconds.
ACPICA bugzilla 854.
http://www.acpica.org/bugzilla/show_bug.cgi?id=854
Signed-off-by: Bob Moore <robert.moore@...el.com>
Signed-off-by: Lin Ming <ming.m.lin@...el.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit d70326689b70b35527765bd3decbb1229459e928
Author: Bob Moore <robert.moore@...el.com>
Date: Wed May 26 11:06:12 2010 +0800
ACPICA: Fix namestring associated with AE_NO_HANDLER exception
Was incorrectly AE_WAKE_ONLY_GPE.
Signed-off-by: Bob Moore <robert.moore@...el.com>
Signed-off-by: Lin Ming <ming.m.lin@...el.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit a48ecc771852158eb7b9ace242f0a6226a3907b7
Merge: 9263482 8aa4b14
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 00:52:19 2010 -0400
Merge branch 'acpi_pad' into release
commit 92634825571d86417941855a8e3189c07aa3c706
Merge: 7e27d6e 9d3c752
Author: Len Brown <len.brown@...el.com>
Date: Sat Jun 12 00:51:49 2010 -0400
Merge branch 'gpe-regression-fixes' into release
commit 9d3c752de65dbfa6e522f1d666deb0ac152ef367
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Tue Jun 8 10:50:53 2010 +0200
ACPI / ACPICA: Fix sysfs GPE interface
The sysfs interface allowing user space to disable/enable GPEs
doesn't work correctly, because a GPE disabled this way will be
re-enabled shortly by acpi_ev_asynch_enable_gpe() if it was
previosuly enabled by acpi_enable_gpe() (in which case the
corresponding bit in its enable register's enable_for_run mask is
set).
To address this issue make the sysfs GPE interface use
acpi_enable_gpe() and acpi_disable_gpe() instead of acpi_set_gpe()
so that GPE reference counters are modified by it along with the
values of GPE enable registers.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Signed-off-by: Len Brown <len.brown@...el.com>
commit ce43ace02320a3fb9614ddb27edc3a8700d68b26
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Tue Jun 8 10:50:20 2010 +0200
ACPI / ACPICA: Fix GPE initialization
While developing the GPE reference counting code we overlooked the
fact that acpi_ev_update_gpes() could have enabled GPEs before
acpi_ev_initialize_gpe_block() was called. As a result, some GPEs
are enabled twice during the initialization.
To fix this issue avoid calling acpi_enable_gpe() from
acpi_ev_initialize_gpe_block() for the GPEs that have nonzero
runtime reference counters.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Signed-off-by: Len Brown <len.brown@...el.com>
commit c9a8bbb7704cbf515c0fc68970abbe4e91d68521
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Tue Jun 8 10:49:45 2010 +0200
ACPI / ACPICA: Avoid writing full enable masks to GPE registers
ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after
an event signaled by it has been handled. However, this function
writes the entire GPE enable mask to the GPE's enable register which
may not be correct. Namely, if one of the other GPEs in the same
register was previously enabled by acpi_enable_gpe() and subsequently
disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will
re-enable it along with the target GPE.
To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it
calls acpi_hw_low_set_gpe() with a special action value,
ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the
corresponding bit in its register's enable_for_run mask is set.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Signed-off-by: Len Brown <len.brown@...el.com>
commit fd247447c1d94a79d5cfc647430784306b3a8323
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Tue Jun 8 10:49:08 2010 +0200
ACPI / ACPICA: Fix low-level GPE manipulation code
ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level,
which is incorrect, because this function only enables the GPE if the
corresponding bit in its enable register's enable_for_run mask is set.
This causes acpi_set_gpe() to work incorrectly if used for enabling
GPEs that were not previously enabled with acpi_enable_gpe(). As a
result, among other things, wakeup-only GPEs are never enabled by
acpi_enable_wakeup_device(), so the devices that use them are unable
to wake up the system.
To fix this issue remove acpi_ev_enable_gpe() and its counterpart
acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with
acpi_hw_low_set_gpe() that will be used instead to manipulate GPE
enable bits at the low level. Make the users of acpi_ev_enable_gpe()
and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and
make sure that GPE enable masks are only updated by acpi_enable_gpe()
and acpi_disable_gpe() when GPE reference counters change from 0
to 1 and from 1 to 0, respectively.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Signed-off-by: Len Brown <len.brown@...el.com>
commit e4e9a735991c80fb0fc1bd4a13a93681c3c17ce0
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Tue Jun 8 10:48:26 2010 +0200
ACPI / ACPICA: Use helper function for computing GPE masks
In quite a few places ACPICA needs to compute a GPE enable mask with
only one bit, corresponding to a given GPE, set. Currently, that
computation is always open coded which leads to unnecessary code
duplication. Fix this by introducing a helper function for computing
one-bit GPE enable masks and using it where appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Signed-off-by: Len Brown <len.brown@...el.com>
commit a997ab332832519c2e292db13f509e4360495a5a
Author: Rafael J. Wysocki <rjw@...k.pl>
Date: Sat Jun 12 00:05:19 2010 +0200
ACPI / ACPICA: Do not attempt to disable GPE when installing handler
Commit 0f849d2cc6863c7874889ea60a871fb71399dd3f (ACPICA: Minimize
the differences between linux GPE code and ACPICA code base)
introduced a change attempting to disable a GPE before installing
a handler for it in acpi_install_gpe_handler() which was incorrect.
First, the GPE disabled by it is never enabled again (except during
resume) which leads to battery insert/remove events not being
reported on the Maxim Levitsky's machine. Second, the disabled
GPE is still reported as enabled by the sysfs interface that only
checks its enable register's enable_for_run mask.
Revert this change for now, because it causes more damage to happen
than the bug it was supposed to fix.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Reported-and-tested-by: Maxim Levitsky <maximlevitsky@...il.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit 4b1b29bc8801badd243694add02262e0955dde1b
Author: Zhang Rui <rui.zhang@...el.com>
Date: Tue Jun 8 15:28:40 2010 +0800
ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
Disable Vista compatibility for Sony VGN-NS50B_L.
https://bugzilla.kernel.org/show_bug.cgi?id=12904#c46
Note that this change is a workaround, not a permanent fix.
For the permanent fix is to figure out what compatibility
means and to actually be compatible...
Tested-by: Voldemar <harestomper@...il.com>
Signed-off-by: Zhang Rui <rui.zhang@...el.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit 934231de706d2579fae14f5857fcd8de991009ff
Author: Liang Li <liang.li@...driver.com>
Date: Thu Jun 10 13:42:49 2010 +0800
ACPI: fan: fix unbalanced code block
The code block braced with CONFIG_ACPI_PROCFS is unblanced. When
CONFIG_ACPI_PROCFS=n, kernel trace will be produced like:
Call Trace:
[<c111637d>] ? remove_proc_entry+0x20d/0x290
[<c111637d>] ? remove_proc_entry+0x20d/0x290
[<c103b02c>] warn_slowpath_common+0x6c/0xc0
[<c111637d>] ? remove_proc_entry+0x20d/0x290
[<c103b0c6>] warn_slowpath_fmt+0x26/0x30
[<c111637d>] remove_proc_entry+0x20d/0x290
[<c1116bd7>] ? proc_register+0x117/0x1f0
[<c1116e83>] ? proc_mkdir_mode+0x33/0x50
[<c14f483c>] ? acpi_fan_init+0x0/0x2c
[<c14f485f>] acpi_fan_init+0x23/0x2c
[<c1001123>] do_one_initcall+0x23/0x180
[<c107dcf7>] ? init_irq_proc+0x67/0x80
[<c14d43bd>] kernel_init+0x13c/0x20e
[<c1030e50>] ? schedule_tail+0x20/0x90
[<c1389e06>] ? syscall_exit+0x5/0x16
[<c14d4281>] ? kernel_init+0x0/0x20e
[<c14d4281>] ? kernel_init+0x0/0x20e
[<c10032f6>] kernel_thread_helper+0x6/0x30
---[ end trace a7919e7f17c0a725 ]---
Then also bracket later error checking code with ACPI_PROCFS
option to avoid mismatch problem.
Signed-off-by: Liang Li <liang.li@...driver.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit 2a6b69765ad794389f2fc3e14a0afa1a995221c2
Author: Matthew Garrett <mjg@...hat.com>
Date: Fri May 28 16:32:15 2010 -0400
ACPI: Store NVS state even when entering suspend to RAM
https://bugzilla.kernel.org/show_bug.cgi?id=13931 describes a bug where
a system fails to successfully resume after the second suspend. Maxim
Levitsky discovered that this could be rectified by forcibly saving
and restoring the ACPI non-volatile state. The spec indicates that this
is only required for S4, but testing the behaviour of Windows by adding
an ACPI NVS region to qemu's e820 map and registering a custom memory
read/write handler reveals that it's saved and restored even over suspend
to RAM. We should mimic that behaviour to avoid other broken platforms.
Signed-off-by: Matthew Garrett <mjg@...hat.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit dd4c4f17d722ffeb2515bf781400675a30fcead7
Author: Matthew Garrett <mjg@...hat.com>
Date: Fri May 28 16:32:14 2010 -0400
suspend: Move NVS save/restore code to generic suspend functionality
Saving platform non-volatile state may be required for suspend to RAM as
well as hibernation. Move it to more generic code.
Signed-off-by: Matthew Garrett <mjg@...hat.com>
Acked-by: Rafael J. Wysocki <rjw@...k.pl>
Tested-by: Maxim Levitsky <maximlevitsky@...il.com>
Signed-off-by: Len Brown <len.brown@...el.com>
commit 75cbfb97a156dd3dabdc81295fb8144576332366
Author: Thomas Renninger <trenn@...e.de>
Date: Wed May 26 17:03:33 2010 +0200
ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
Patch is against latest Linus master branch and is expected to be
safe bug fix.
You get:
ACPI: HARDWARE addr space,NOT supported yet
for each ACPI defined CPU which status is active, but exceeds
maxcpus= count.
As these "not booted" CPUs do not run an idle routine
and echo X >/proc/acpi/processor/*/throttling did not work
I couldn't find a way to really access not onlined/booted
machines. Still this should get fixed and
/proc/acpi/processor/X dirs of cores exceeding maxcpus
should not show up.
I wonder whether this could get cleaned up by truncating possible cpu mask
and nr_cpu_ids to setup_max_cpus early some day
(and not exporting setup_max_cpus anymore then).
But this needs touching of a lot other places...
Signed-off-by: Thomas Renninger <trenn@...e.de>
CC: travis@....com
CC: linux-acpi@...r.kernel.org
CC: lenb@...nel.org
Signed-off-by: Len Brown <len.brown@...el.com>
commit 8aa4b14eb023fecaa48d55402e98bdf84b375c4a
Author: Chen Gong <gong.chen@...ux.intel.com>
Date: Sun May 30 11:37:08 2010 +0800
ACPI: acpi_pad: Don't needlessly mark LAPIC unstable
As suggested in Venki's suggestion in the commit 0dc698b,
add LAPIC unstable detection in the acpi_pad drvier too.
Signed-off-by: Chen Gong <gong.chen@...ux.intel.com>
Signed-off-by: Len Brown <len.brown@...el.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists