| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20100614082842.29068.42203.sendpatchset@localhost6.localdomain6>
Date: Mon, 14 Jun 2010 13:58:42 +0530
From: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
To: Peter Zijlstra <peterz@...radead.org>, Ingo Molnar <mingo@...e.hu>
Cc: Masami Hiramatsu <mhiramat@...hat.com>, Mel Gorman <mel@....ul.ie>,
Srikar Dronamraju <srikar@...ux.vnet.ibm.com>,
Randy Dunlap <rdunlap@...otime.net>,
Arnaldo Carvalho de Melo <acme@...radead.org>,
Steven Rostedt <rostedt@...dmis.org>,
Roland McGrath <roland@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
Christoph Hellwig <hch@...radead.org>,
Ananth N Mavinakayanahalli <ananth@...ibm.com>,
Oleg Nesterov <oleg@...hat.com>,
Mark Wielaard <mjw@...hat.com>,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
LKML <linux-kernel@...r.kernel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Frederic Weisbecker <fweisbec@...il.com>,
Jim Keniston <jkenisto@...ux.vnet.ibm.com>,
"Rafael J. Wysocki" <rjw@...k.pl>,
"Frank Ch. Eigler" <fche@...hat.com>,
Andrew Morton <akpm@...ux-foundation.org>,
"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
Subject: [PATCH v5 4/14] x86 support for User space breakpoint assistance
x86_support_for_user_bkpt.patch
From: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
x86 support for user breakpoint Infrastructure
Changelog from v1:
set USER_BKPT_FIX_SLEEPY if post_xol might sleep.
This patch provides x86 specific userspace breakpoint assistance
implementation details. It uses the "x86: instruction decoder API" patch
to do validate and analyze the instructions. This analysis is used at
the time of post-processing of breakpoint hit to do the necessary
fix-ups.
Almost all instructions are handled for traditional strategy and
execution out of line strategy. Instruction handled include the RIP
relative instructions.
This patch requires "x86: instruction decoder API" patch.
http://lkml.org/lkml/2009/6/1/459
Signed-off-by: Jim Keniston <jkenisto@...ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
---
arch/x86/Kconfig | 1
arch/x86/include/asm/user_bkpt.h | 43 +++
arch/x86/kernel/Makefile | 2
arch/x86/kernel/user_bkpt.c | 572 ++++++++++++++++++++++++++++++++++++++
4 files changed, 618 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/include/asm/user_bkpt.h
create mode 100644 arch/x86/kernel/user_bkpt.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6f77afa..db1b378 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -54,6 +54,7 @@ config X86
select HAVE_KERNEL_LZO
select HAVE_HW_BREAKPOINT
select HAVE_MIXED_BREAKPOINTS_REGS
+ select HAVE_USER_BKPT
select PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
select ANON_INODES
diff --git a/arch/x86/include/asm/user_bkpt.h b/arch/x86/include/asm/user_bkpt.h
new file mode 100644
index 0000000..df8a4a0
--- /dev/null
+++ b/arch/x86/include/asm/user_bkpt.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_USER_BKPT_H
+#define _ASM_USER_BKPT_H
+/*
+ * User-space BreakPoint support (user_bkpt) for x86
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2008-2010
+ * Authors:
+ * Srikar Dronamraju
+ * Jim Keniston
+ */
+
+typedef u8 user_bkpt_opcode_t;
+#define MAX_UINSN_BYTES 16
+#define USER_BKPT_XOL_SLOT_BYTES (MAX_UINSN_BYTES)
+
+#ifdef CONFIG_X86_64
+struct bkpt_arch_info {
+ unsigned long rip_target_address;
+ u8 orig_insn[MAX_UINSN_BYTES];
+};
+struct user_bkpt_task_arch_info {
+ unsigned long saved_scratch_register;
+};
+#else
+struct bkpt_arch_info {};
+struct user_bkpt_task_arch_info {};
+#endif
+
+#endif /* _ASM_USER_BKPT_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index e77b220..53cf2af 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -115,6 +115,8 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
+obj-$(CONFIG_USER_BKPT) += user_bkpt.o
+
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/user_bkpt.c b/arch/x86/kernel/user_bkpt.c
new file mode 100644
index 0000000..eb74a8d
--- /dev/null
+++ b/arch/x86/kernel/user_bkpt.c
@@ -0,0 +1,572 @@
+/*
+ * User-space BreakPoint support (user_bkpt) for x86
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2008-2010
+ * Authors:
+ * Srikar Dronamraju
+ * Jim Keniston
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/user_bkpt.h>
+#include <asm/insn.h>
+
+#ifdef CONFIG_X86_32
+#define is_32bit_app(tsk) 1
+#else
+#define is_32bit_app(tsk) (test_tsk_thread_flag(tsk, TIF_IA32))
+#endif
+
+#define USER_BKPT_FIX_RIP_AX 0x8000
+#define USER_BKPT_FIX_RIP_CX 0x4000
+
+/* Adaptations for mhiramat x86 decoder v14. */
+#define OPCODE1(insn) ((insn)->opcode.bytes[0])
+#define OPCODE2(insn) ((insn)->opcode.bytes[1])
+#define OPCODE3(insn) ((insn)->opcode.bytes[2])
+#define MODRM_REG(insn) X86_MODRM_REG(insn->modrm.value)
+
+static void set_ip(struct pt_regs *regs, unsigned long vaddr)
+{
+ regs->ip = vaddr;
+}
+
+#ifdef CONFIG_X86_64
+static bool is_riprel_insn(struct user_bkpt *user_bkpt)
+{
+ return ((user_bkpt->fixups &
+ (USER_BKPT_FIX_RIP_AX | USER_BKPT_FIX_RIP_CX)) != 0);
+}
+
+static void cancel_xol(struct task_struct *tsk, struct user_bkpt *user_bkpt)
+{
+ if (is_riprel_insn(user_bkpt)) {
+ /*
+ * We rewrote user_bkpt->insn to use indirect addressing rather
+ * than rip-relative addressing for XOL. For
+ * single-stepping inline, put back the original instruction.
+ */
+ memcpy(user_bkpt->insn, user_bkpt->arch_info.orig_insn,
+ MAX_UINSN_BYTES);
+ user_bkpt->strategy &= ~USER_BKPT_HNT_TSKINFO;
+ }
+}
+#endif /* CONFIG_X86_64 */
+
+static const u32 good_insns_64[256 / 32] = {
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+ /* ---------------------------------------------- */
+ W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 00 */
+ W(0x10, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 10 */
+ W(0x20, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 20 */
+ W(0x30, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 30 */
+ W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
+ W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+ W(0x60, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+ W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
+ W(0x80, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+ W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+ W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
+ W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+ W(0xc0, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
+ W(0xd0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+ W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
+ W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
+ /* ---------------------------------------------- */
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+};
+
+/* Good-instruction tables for 32-bit apps -- copied from i386 uprobes */
+
+static const u32 good_insns_32[256 / 32] = {
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+ /* ---------------------------------------------- */
+ W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 00 */
+ W(0x10, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 10 */
+ W(0x20, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) | /* 20 */
+ W(0x30, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) , /* 30 */
+ W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
+ W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+ W(0x60, 1, 1, 1, 0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+ W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
+ W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+ W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+ W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
+ W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+ W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
+ W(0xd0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+ W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
+ W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
+ /* ---------------------------------------------- */
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+};
+
+/* Using this for both 64-bit and 32-bit apps */
+static const u32 good_2byte_insns[256 / 32] = {
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+ /* ---------------------------------------------- */
+ W(0x00, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1) | /* 00 */
+ W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* 10 */
+ W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
+ W(0x30, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
+ W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
+ W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+ W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 60 */
+ W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
+ W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+ W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+ W(0xa0, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1) | /* a0 */
+ W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+ W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
+ W(0xd0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+ W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* e0 */
+ W(0xf0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0) /* f0 */
+ /* ---------------------------------------------- */
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+};
+
+/*
+ * opcodes we'll probably never support:
+ * 6c-6d, e4-e5, ec-ed - in
+ * 6e-6f, e6-e7, ee-ef - out
+ * cc, cd - int3, int
+ * cf - iret
+ * d6 - illegal instruction
+ * f1 - int1/icebp
+ * f4 - hlt
+ * fa, fb - cli, sti
+ * 0f - lar, lsl, syscall, clts, sysret, sysenter, sysexit, invd, wbinvd, ud2
+ *
+ * invalid opcodes in 64-bit mode:
+ * 06, 0e, 16, 1e, 27, 2f, 37, 3f, 60-62, 82, c4-c5, d4-d5
+ *
+ * 63 - we support this opcode in x86_64 but not in i386.
+ *
+ * opcodes we may need to refine support for:
+ * 0f - 2-byte instructions: For many of these instructions, the validity
+ * depends on the prefix and/or the reg field. On such instructions, we
+ * just consider the opcode combination valid if it corresponds to any
+ * valid instruction.
+ * 8f - Group 1 - only reg = 0 is OK
+ * c6-c7 - Group 11 - only reg = 0 is OK
+ * d9-df - fpu insns with some illegal encodings
+ * f2, f3 - repnz, repz prefixes. These are also the first byte for
+ * certain floating-point instructions, such as addsd.
+ * fe - Group 4 - only reg = 0 or 1 is OK
+ * ff - Group 5 - only reg = 0-6 is OK
+ *
+ * others -- Do we need to support these?
+ * 0f - (floating-point?) prefetch instructions
+ * 07, 17, 1f - pop es, pop ss, pop ds
+ * 26, 2e, 36, 3e - es:, cs:, ss:, ds: segment prefixes --
+ * but 64 and 65 (fs: and gs:) seem to be used, so we support them
+ * 67 - addr16 prefix
+ * ce - into
+ * f0 - lock prefix
+ */
+
+/*
+ * TODO:
+ * - Where necessary, examine the modrm byte and allow only valid instructions
+ * in the different Groups and fpu instructions.
+ */
+
+static bool is_prefix_bad(struct insn *insn)
+{
+ int i;
+
+ for (i = 0; i < insn->prefixes.nbytes; i++) {
+ switch (insn->prefixes.bytes[i]) {
+ case 0x26: /*INAT_PFX_ES */
+ case 0x2E: /*INAT_PFX_CS */
+ case 0x36: /*INAT_PFX_DS */
+ case 0x3E: /*INAT_PFX_SS */
+ case 0xF0: /*INAT_PFX_LOCK */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static void report_bad_prefix(void)
+{
+ printk(KERN_ERR "user_bkpt does not currently support probing "
+ "instructions with any of the following prefixes: "
+ "cs:, ds:, es:, ss:, lock:\n");
+}
+
+static void report_bad_1byte_opcode(int mode, user_bkpt_opcode_t op)
+{
+ printk(KERN_ERR "In %d-bit apps, "
+ "user_bkpt does not currently support probing "
+ "instructions whose first byte is 0x%2.2x\n", mode, op);
+}
+
+static void report_bad_2byte_opcode(user_bkpt_opcode_t op)
+{
+ printk(KERN_ERR "user_bkpt does not currently support probing "
+ "instructions with the 2-byte opcode 0x0f 0x%2.2x\n", op);
+}
+
+static int validate_insn_32bits(struct user_bkpt *user_bkpt, struct insn *insn)
+{
+ insn_init(insn, user_bkpt->insn, false);
+
+ /* Skip good instruction prefixes; reject "bad" ones. */
+ insn_get_opcode(insn);
+ if (is_prefix_bad(insn)) {
+ report_bad_prefix();
+ return -EPERM;
+ }
+ if (test_bit(OPCODE1(insn), (unsigned long *) good_insns_32))
+ return 0;
+ if (insn->opcode.nbytes == 2) {
+ if (test_bit(OPCODE2(insn),
+ (unsigned long *) good_2byte_insns))
+ return 0;
+ report_bad_2byte_opcode(OPCODE2(insn));
+ } else
+ report_bad_1byte_opcode(32, OPCODE1(insn));
+ return -EPERM;
+}
+
+static int validate_insn_64bits(struct user_bkpt *user_bkpt, struct insn *insn)
+{
+ insn_init(insn, user_bkpt->insn, true);
+
+ /* Skip good instruction prefixes; reject "bad" ones. */
+ insn_get_opcode(insn);
+ if (is_prefix_bad(insn)) {
+ report_bad_prefix();
+ return -EPERM;
+ }
+ if (test_bit(OPCODE1(insn), (unsigned long *) good_insns_64))
+ return 0;
+ if (insn->opcode.nbytes == 2) {
+ if (test_bit(OPCODE2(insn),
+ (unsigned long *) good_2byte_insns))
+ return 0;
+ report_bad_2byte_opcode(OPCODE2(insn));
+ } else
+ report_bad_1byte_opcode(64, OPCODE1(insn));
+ return -EPERM;
+}
+
+/*
+ * Figure out which fixups post_xol() will need to perform, and annotate
+ * user_bkpt->fixups accordingly. To start with, user_bkpt->fixups is
+ * either zero or it reflects rip-related fixups.
+ */
+static void prepare_fixups(struct user_bkpt *user_bkpt, struct insn *insn)
+{
+ bool fix_ip = true, fix_call = false; /* defaults */
+ insn_get_opcode(insn); /* should be a nop */
+
+ switch (OPCODE1(insn)) {
+ case 0xc3: /* ret/lret */
+ case 0xcb:
+ case 0xc2:
+ case 0xca:
+ /* ip is correct */
+ fix_ip = false;
+ break;
+ case 0xe8: /* call relative - Fix return addr */
+ fix_call = true;
+ break;
+ case 0x9a: /* call absolute - Fix return addr, not ip */
+ fix_call = true;
+ fix_ip = false;
+ break;
+ case 0xff:
+ {
+ int reg;
+ insn_get_modrm(insn);
+ reg = MODRM_REG(insn);
+ if (reg == 2 || reg == 3) {
+ /* call or lcall, indirect */
+ /* Fix return addr; ip is correct. */
+ fix_call = true;
+ fix_ip = false;
+ } else if (reg == 4 || reg == 5) {
+ /* jmp or ljmp, indirect */
+ /* ip is correct. */
+ fix_ip = false;
+ }
+ break;
+ }
+ case 0xea: /* jmp absolute -- ip is correct */
+ fix_ip = false;
+ break;
+ default:
+ break;
+ }
+ if (fix_ip)
+ user_bkpt->fixups |= USER_BKPT_FIX_IP;
+ if (fix_call)
+ user_bkpt->fixups |=
+ (USER_BKPT_FIX_CALL | USER_BKPT_FIX_SLEEPY);
+}
+
+#ifdef CONFIG_X86_64
+static int handle_riprel_insn(struct user_bkpt *user_bkpt, struct insn *insn);
+#endif
+
+static int analyze_insn(struct task_struct *tsk, struct user_bkpt *user_bkpt)
+{
+ int ret;
+ struct insn insn;
+
+ user_bkpt->fixups = 0;
+#ifdef CONFIG_X86_64
+ user_bkpt->arch_info.rip_target_address = 0x0;
+#endif
+
+ if (is_32bit_app(tsk))
+ ret = validate_insn_32bits(user_bkpt, &insn);
+ else
+ ret = validate_insn_64bits(user_bkpt, &insn);
+ if (ret != 0)
+ return ret;
+ if (user_bkpt->strategy & USER_BKPT_HNT_INLINE)
+ return 0;
+#ifdef CONFIG_X86_64
+ ret = handle_riprel_insn(user_bkpt, &insn);
+ if (ret == -1)
+ /* rip-relative; can't XOL */
+ return 0;
+ else if (ret == 0)
+ /* not rip-relative */
+ user_bkpt->strategy &= ~USER_BKPT_HNT_TSKINFO;
+#endif
+ prepare_fixups(user_bkpt, &insn);
+ return 0;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * If user_bkpt->insn doesn't use rip-relative addressing, return 0. Otherwise,
+ * rewrite the instruction so that it accesses its memory operand
+ * indirectly through a scratch register. Set user_bkpt->fixups and
+ * user_bkpt->arch_info.rip_target_address accordingly. (The contents of the
+ * scratch register will be saved before we single-step the modified
+ * instruction, and restored afterward.) Return 1.
+ *
+ * (... except if the client doesn't support our USER_BKPT_HNT_TSKINFO strategy,
+ * we must suppress XOL for rip-relative instructions: return -1.)
+ *
+ * We do this because a rip-relative instruction can access only a
+ * relatively small area (+/- 2 GB from the instruction), and the XOL
+ * area typically lies beyond that area. At least for instructions
+ * that store to memory, we can't execute the original instruction
+ * and "fix things up" later, because the misdirected store could be
+ * disastrous.
+ *
+ * Some useful facts about rip-relative instructions:
+ * - There's always a modrm byte.
+ * - There's never a SIB byte.
+ * - The displacement is always 4 bytes.
+ */
+static int handle_riprel_insn(struct user_bkpt *user_bkpt, struct insn *insn)
+{
+ u8 *cursor;
+ u8 reg;
+
+ if (!insn_rip_relative(insn))
+ return 0;
+
+ /*
+ * We have a rip-relative instruction. To allow this instruction
+ * to be single-stepped out of line, the client must provide us
+ * with a per-task user_bkpt_task_arch_info object.
+ */
+ if (!(user_bkpt->strategy & USER_BKPT_HNT_TSKINFO)) {
+ user_bkpt->strategy |= USER_BKPT_HNT_INLINE;
+ return -1;
+ }
+ memcpy(user_bkpt->arch_info.orig_insn, user_bkpt->insn,
+ MAX_UINSN_BYTES);
+
+ /*
+ * Point cursor at the modrm byte. The next 4 bytes are the
+ * displacement. Beyond the displacement, for some instructions,
+ * is the immediate operand.
+ */
+ cursor = user_bkpt->insn + insn->prefixes.nbytes
+ + insn->rex_prefix.nbytes + insn->opcode.nbytes;
+ insn_get_length(insn);
+
+ /*
+ * Convert from rip-relative addressing to indirect addressing
+ * via a scratch register. Change the r/m field from 0x5 (%rip)
+ * to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
+ */
+ reg = MODRM_REG(insn);
+ if (reg == 0) {
+ /*
+ * The register operand (if any) is either the A register
+ * (%rax, %eax, etc.) or (if the 0x4 bit is set in the
+ * REX prefix) %r8. In any case, we know the C register
+ * is NOT the register operand, so we use %rcx (register
+ * #1) for the scratch register.
+ */
+ user_bkpt->fixups = USER_BKPT_FIX_RIP_CX;
+ /* Change modrm from 00 000 101 to 00 000 001. */
+ *cursor = 0x1;
+ } else {
+ /* Use %rax (register #0) for the scratch register. */
+ user_bkpt->fixups = USER_BKPT_FIX_RIP_AX;
+ /* Change modrm from 00 xxx 101 to 00 xxx 000 */
+ *cursor = (reg << 3);
+ }
+
+ /* Target address = address of next instruction + (signed) offset */
+ user_bkpt->arch_info.rip_target_address = (long) user_bkpt->vaddr +
+ insn->length + insn->displacement.value;
+ /* Displacement field is gone; slide immediate field (if any) over. */
+ if (insn->immediate.nbytes) {
+ cursor++;
+ memmove(cursor, cursor + insn->displacement.nbytes,
+ insn->immediate.nbytes);
+ }
+ return 1;
+}
+
+/*
+ * If we're emulating a rip-relative instruction, save the contents
+ * of the scratch register and store the target address in that register.
+ */
+static int pre_xol(struct task_struct *tsk, struct user_bkpt *user_bkpt,
+ struct user_bkpt_task_arch_info *tskinfo, struct pt_regs *regs)
+{
+ BUG_ON(!user_bkpt->xol_vaddr);
+ regs->ip = user_bkpt->xol_vaddr;
+ if (user_bkpt->fixups & USER_BKPT_FIX_RIP_AX) {
+ tskinfo->saved_scratch_register = regs->ax;
+ regs->ax = user_bkpt->arch_info.rip_target_address;
+ } else if (user_bkpt->fixups & USER_BKPT_FIX_RIP_CX) {
+ tskinfo->saved_scratch_register = regs->cx;
+ regs->cx = user_bkpt->arch_info.rip_target_address;
+ }
+ return 0;
+}
+#endif
+
+/*
+ * Called by post_xol() to adjust the return address pushed by a call
+ * instruction executed out of line.
+ */
+static int adjust_ret_addr(struct task_struct *tsk, unsigned long sp,
+ long correction)
+{
+ int rasize, ncopied;
+ long ra = 0;
+
+ if (is_32bit_app(tsk))
+ rasize = 4;
+ else
+ rasize = 8;
+ ncopied = user_bkpt_read_vm(tsk, (void __user *) sp, &ra, rasize);
+ if (unlikely(ncopied != rasize))
+ goto fail;
+ ra += correction;
+ ncopied = user_bkpt_write_data(tsk, (void __user *) sp, &ra, rasize);
+ if (unlikely(ncopied != rasize))
+ goto fail;
+ return 0;
+
+fail:
+ printk(KERN_ERR
+ "user_bkpt: Failed to adjust return address after"
+ " single-stepping call instruction;"
+ " pid=%d, sp=%#lx\n", tsk->pid, sp);
+ return -EFAULT;
+}
+
+/*
+ * Called after single-stepping. user_bkpt->vaddr is the address of the
+ * instruction whose first byte has been replaced by the "int3"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is user_bkpt->xol_vaddr.
+ *
+ * This function prepares to resume execution after the single-step.
+ * We have to fix things up as follows:
+ *
+ * Typically, the new ip is relative to the copied instruction. We need
+ * to make it relative to the original instruction (FIX_IP). Exceptions
+ * are return instructions and absolute or indirect jump or call instructions.
+ *
+ * If the single-stepped instruction was a call, the return address that
+ * is atop the stack is the address following the copied instruction. We
+ * need to make it the address following the original instruction (FIX_CALL).
+ *
+ * If the original instruction was a rip-relative instruction such as
+ * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
+ * instruction using a scratch register -- e.g., "movl %edx,(%rax)".
+ * We need to restore the contents of the scratch register and adjust
+ * the ip, keeping in mind that the instruction we executed is 4 bytes
+ * shorter than the original instruction (since we squeezed out the offset
+ * field). (FIX_RIP_AX or FIX_RIP_CX)
+ */
+static int post_xol(struct task_struct *tsk, struct user_bkpt *user_bkpt,
+ struct user_bkpt_task_arch_info *tskinfo, struct pt_regs *regs)
+{
+ /* Typically, the XOL vma is at a high addr, so correction < 0. */
+ long correction = (long) (user_bkpt->vaddr - user_bkpt->xol_vaddr);
+ int result = 0;
+
+#ifdef CONFIG_X86_64
+ if (is_riprel_insn(user_bkpt)) {
+ if (user_bkpt->fixups & USER_BKPT_FIX_RIP_AX)
+ regs->ax = tskinfo->saved_scratch_register;
+ else
+ regs->cx = tskinfo->saved_scratch_register;
+ /*
+ * The original instruction includes a displacement, and so
+ * is 4 bytes longer than what we've just single-stepped.
+ * Fall through to handle stuff like "jmpq *...(%rip)" and
+ * "callq *...(%rip)".
+ */
+ correction += 4;
+ }
+#endif
+ if (user_bkpt->fixups & USER_BKPT_FIX_IP)
+ regs->ip += correction;
+ if (user_bkpt->fixups & USER_BKPT_FIX_CALL)
+ result = adjust_ret_addr(tsk, regs->sp, correction);
+ return result;
+}
+
+struct user_bkpt_arch_info user_bkpt_arch_info = {
+ .bkpt_insn = 0xcc,
+ .ip_advancement_by_bkpt_insn = 1,
+ .max_insn_bytes = MAX_UINSN_BYTES,
+#ifdef CONFIG_X86_32
+ .strategies = 0x0,
+#else
+ /* rip-relative instructions require special handling. */
+ .strategies = USER_BKPT_HNT_TSKINFO,
+ .pre_xol = pre_xol,
+ .cancel_xol = cancel_xol,
+#endif
+ .set_ip = set_ip,
+ .analyze_insn = analyze_insn,
+ .post_xol = post_xol,
+};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists