| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100615121226.GE14510@rakim.wolfsonmicro.main>
Date: Tue, 15 Jun 2010 13:12:26 +0100
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Liam Girdwood <lrg@...mlogic.co.uk>, linux-kernel@...r.kernel.org,
kyungmin.park@...sung.com, sameo@...ux.intel.com
Subject: Re: [PATCH v2] drivers: regulator: add Maxim 8998 driver
On Tue, Jun 15, 2010 at 02:03:08PM +0200, Marek Szyprowski wrote:
> From: Kyungmin Park <kyungmin.park@...sung.com>
> This patch adds voltage regulator driver for Maxim 8998 chip. This chip
> is used on Samsung Aquila and GONI boards and provides following
> functionalities:
> - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power
> controllers
> - battery charger
> - RTC
CCing in Samuel for the MFD part and hence not deleting any context.
It'd be better to make the register read/write functions part of the MFD
driver and export them (since the RTC and so on drivers will need the
same stuff) but other than that this looks good and I've no comments. I
suspect it'd be easier to review fixing the register write location as
an incremental patch unless you need to respin for some other reason.
Acked-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
> index 9da0e50..ad61a9e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -252,6 +252,16 @@ config MFD_MAX8925
> accessing the device, additional drivers must be enabled in order
> to use the functionality of the device.
>
> +config MFD_MAX8998
> + bool "Maxim Semiconductor MAX8998 PMIC Support"
> + depends on I2C=y
> + select MFD_CORE
> + help
> + Say yes here to support for Maxim Semiconductor MAX8998. This is
> + a Power Management IC. This driver provies common support for
> + accessing the device, additional drivers must be enabled in order
> + to use the functionality of the device.
> +
> config MFD_WM8400
> tristate "Support Wolfson Microelectronics WM8400"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index fb503e7..a362ccf 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
> obj-$(CONFIG_PMIC_DA903X) += da903x.o
> max8925-objs := max8925-core.o max8925-i2c.o
> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> +obj-$(CONFIG_MFD_MAX8998) += max8998.o
>
> pcf50633-objs := pcf50633-core.o pcf50633-irq.o
> obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
> diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
> new file mode 100644
> index 0000000..c1f4be5
> --- /dev/null
> +++ b/drivers/mfd/max8998.c
> @@ -0,0 +1,154 @@
> +/*
> + * max8998.c - mfd core driver for the Maxim 8998
> + *
> + * Copyright (C) 2009-2010 Samsung Electronics
> + * Kyungmin Park <kyungmin.park@...sung.com>
> + * Marek Szyprowski <m.szyprowski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max8998.h>
> +#include <linux/mfd/max8998-private.h>
> +
> +static struct mfd_cell max8998_devs[] = {
> + {
> + .name = "max8998-pmic",
> + }, {
> + .name = "max8998-rtc",
> + },
> +};
> +
> +static int max8998_i2c_device_read(struct max8998_dev *max8998, u8 reg, u8 *dest)
> +{
> + struct i2c_client *client = max8998->i2c_client;
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret < 0)
> + return ret;
> +
> + ret &= 0xff;
> + *dest = ret;
> + return 0;
> +}
> +
> +static int max8998_i2c_device_write(struct max8998_dev *max8998, u8 reg, u8 value)
> +{
> + struct i2c_client *client = max8998->i2c_client;
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(client, reg, value);
> + return ret;
> +}
> +
> +static int max8998_i2c_device_update(struct max8998_dev *max8998, u8 reg,
> + u8 val, u8 mask)
> +{
> + struct i2c_client *client = max8998->i2c_client;
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret >= 0) {
> + u8 old_val = ret & 0xff;
> + u8 new_val = (val & mask) | (old_val & (~mask));
> + ret = i2c_smbus_write_byte_data(client, reg, new_val);
> + if (ret >= 0)
> + ret = 0;
> + }
> + return ret;
> +}
> +
> +static int max8998_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct max8998_dev *max8998;
> + int ret = 0;
> +
> + max8998 = kzalloc(sizeof(struct max8998_dev), GFP_KERNEL);
> + if (max8998 == NULL) {
> + kfree(i2c);
> + return -ENOMEM;
> + }
> +
> + i2c_set_clientdata(i2c, max8998);
> + max8998->dev = &i2c->dev;
> + max8998->i2c_client = i2c;
> + max8998->dev_read = max8998_i2c_device_read;
> + max8998->dev_write = max8998_i2c_device_write;
> + max8998->dev_update = max8998_i2c_device_update;
> +
> + ret = mfd_add_devices(max8998->dev, -1,
> + max8998_devs, ARRAY_SIZE(max8998_devs),
> + NULL, 0);
> + if (ret < 0)
> + goto err;
> +
> + return ret;
> +
> +err:
> + mfd_remove_devices(max8998->dev);
> + kfree(max8998);
> + return ret;
> +}
> +
> +static int max8998_i2c_remove(struct i2c_client *i2c)
> +{
> + struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(max8998->dev);
> + kfree(max8998);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id max8998_i2c_id[] = {
> + { "max8998", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
> +
> +static struct i2c_driver max8998_i2c_driver = {
> + .driver = {
> + .name = "max8998",
> + .owner = THIS_MODULE,
> + },
> + .probe = max8998_i2c_probe,
> + .remove = max8998_i2c_remove,
> + .id_table = max8998_i2c_id,
> +};
> +
> +static int __init max8998_i2c_init(void)
> +{
> + return i2c_add_driver(&max8998_i2c_driver);
> +}
> +/* init early so consumer devices can complete system boot */
> +subsys_initcall(max8998_i2c_init);
> +
> +static void __exit max8998_i2c_exit(void)
> +{
> + i2c_del_driver(&max8998_i2c_driver);
> +}
> +module_exit(max8998_i2c_exit);
> +
> +MODULE_DESCRIPTION("MAXIM 8998 multi-function core driver");
> +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@...sung.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 679ea37..e041dce 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -100,6 +100,14 @@ config REGULATOR_MAX8925
> help
> Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
>
> +config REGULATOR_MAX8998
> + tristate "Maxim 8998 voltage regulator"
> + depends on I2C
> + help
> + This driver controls a Maxim 8998 voltage output regulator
> + via I2C bus. The provided regulator is suitable for S3C6410
> + and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
> +
> config REGULATOR_TWL4030
> bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
> depends on TWL4030_CORE
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index c256668..eafaa68 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
> obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
> obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
> obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
> +obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
> obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
> obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
> obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
> diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
> new file mode 100644
> index 0000000..6f44560
> --- /dev/null
> +++ b/drivers/regulator/max8998.c
> @@ -0,0 +1,628 @@
> +/*
> + * max8998.c - Voltage regulator driver for the Maxim 8998
> + *
> + * Copyright (C) 2009-2010 Samsung Electronics
> + * Kyungmin Park <kyungmin.park@...sung.com>
> + * Marek Szyprowski <m.szyprowski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/mfd/max8998.h>
> +#include <linux/mfd/max8998-private.h>
> +
> +struct max8998_data {
> + struct device *dev;
> + struct max8998_dev *iodev;
> + int num_regulators;
> + struct regulator_dev **rdev;
> +};
> +
> +struct voltage_map_desc {
> + int min;
> + int max;
> + int step;
> +};
> +
> +static inline int max8998_read_reg(struct max8998_data *max8998, u8 reg,
> + u8 *value)
> +{
> + return max8998->iodev->dev_read(max8998->iodev, reg, value);
> +}
> +
> +static inline int max8998_write_reg(struct max8998_data *max8998, u8 reg,
> + u8 value)
> +{
> + return max8998->iodev->dev_write(max8998->iodev, reg, value);
> +}
> +
> +static inline int max8998_update_reg(struct max8998_data *max8998, u8 reg,
> + u8 value, u8 mask)
> +{
> + return max8998->iodev->dev_update(max8998->iodev, reg, value, mask);
> +}
> +
> +/* Voltage maps */
> +static const struct voltage_map_desc ldo23_voltage_map_desc = {
> + .min = 800, .step = 50, .max = 1300,
> +};
> +static const struct voltage_map_desc ldo456711_voltage_map_desc = {
> + .min = 1600, .step = 100, .max = 3600,
> +};
> +static const struct voltage_map_desc ldo8_voltage_map_desc = {
> + .min = 3000, .step = 100, .max = 3600,
> +};
> +static const struct voltage_map_desc ldo9_voltage_map_desc = {
> + .min = 2800, .step = 100, .max = 3100,
> +};
> +static const struct voltage_map_desc ldo10_voltage_map_desc = {
> + .min = 950, .step = 50, .max = 1300,
> +};
> +static const struct voltage_map_desc ldo1213_voltage_map_desc = {
> + .min = 800, .step = 100, .max = 3300,
> +};
> +static const struct voltage_map_desc ldo1415_voltage_map_desc = {
> + .min = 1200, .step = 100, .max = 3300,
> +};
> +static const struct voltage_map_desc ldo1617_voltage_map_desc = {
> + .min = 1600, .step = 100, .max = 3600,
> +};
> +static const struct voltage_map_desc buck12_voltage_map_desc = {
> + .min = 750, .step = 25, .max = 1525,
> +};
> +static const struct voltage_map_desc buck3_voltage_map_desc = {
> + .min = 1600, .step = 100, .max = 3600,
> +};
> +static const struct voltage_map_desc buck4_voltage_map_desc = {
> + .min = 800, .step = 100, .max = 2300,
> +};
> +
> +static const struct voltage_map_desc *ldo_voltage_map[] = {
> + NULL,
> + NULL,
> + &ldo23_voltage_map_desc, /* LDO2 */
> + &ldo23_voltage_map_desc, /* LDO3 */
> + &ldo456711_voltage_map_desc, /* LDO4 */
> + &ldo456711_voltage_map_desc, /* LDO5 */
> + &ldo456711_voltage_map_desc, /* LDO6 */
> + &ldo456711_voltage_map_desc, /* LDO7 */
> + &ldo8_voltage_map_desc, /* LDO8 */
> + &ldo9_voltage_map_desc, /* LDO9 */
> + &ldo10_voltage_map_desc, /* LDO10 */
> + &ldo456711_voltage_map_desc, /* LDO11 */
> + &ldo1213_voltage_map_desc, /* LDO12 */
> + &ldo1213_voltage_map_desc, /* LDO13 */
> + &ldo1415_voltage_map_desc, /* LDO14 */
> + &ldo1415_voltage_map_desc, /* LDO15 */
> + &ldo1617_voltage_map_desc, /* LDO16 */
> + &ldo1617_voltage_map_desc, /* LDO17 */
> + &buck12_voltage_map_desc, /* BUCK1 */
> + &buck12_voltage_map_desc, /* BUCK2 */
> + &buck3_voltage_map_desc, /* BUCK3 */
> + &buck4_voltage_map_desc, /* BUCK4 */
> +};
> +
> +static inline int max8998_get_ldo(struct regulator_dev *rdev)
> +{
> + return rdev_get_id(rdev);
> +}
> +
> +static int max8998_list_voltage(struct regulator_dev *rdev,
> + unsigned int selector)
> +{
> + const struct voltage_map_desc *desc;
> + int ldo = max8998_get_ldo(rdev);
> + int val;
> +
> + if (ldo > ARRAY_SIZE(ldo_voltage_map))
> + return -EINVAL;
> +
> + desc = ldo_voltage_map[ldo];
> + if (desc == NULL)
> + return -EINVAL;
> +
> + val = desc->min + desc->step * selector;
> + if (val > desc->max)
> + return -EINVAL;
> +
> + return val * 1000;
> +}
> +
> +static int max8998_get_enable_register(struct regulator_dev *rdev,
> + int *reg, int *shift)
> +{
> + int ldo = max8998_get_ldo(rdev);
> +
> + switch (ldo) {
> + case MAX8998_LDO2 ... MAX8998_LDO5:
> + *reg = MAX8998_REG_ONOFF1;
> + *shift = 3 - (ldo - MAX8998_LDO2);
> + break;
> + case MAX8998_LDO6 ... MAX8998_LDO13:
> + *reg = MAX8998_REG_ONOFF2;
> + *shift = 7 - (ldo - MAX8998_LDO6);
> + break;
> + case MAX8998_LDO14 ... MAX8998_LDO17:
> + *reg = MAX8998_REG_ONOFF3;
> + *shift = 7 - (ldo - MAX8998_LDO14);
> + break;
> + case MAX8998_BUCK1 ... MAX8998_BUCK4:
> + *reg = MAX8998_REG_ONOFF1;
> + *shift = 7 - (ldo - MAX8998_BUCK1);
> + break;
> + case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
> + *reg = MAX8998_REG_ONOFF4;
> + *shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
> + break;
> + case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
> + *reg = MAX8998_REG_CHGR2;
> + *shift = 7 - (ldo - MAX8998_ESAFEOUT1);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
> +{
> + struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> + int ret, reg, shift = 8;
> + u8 val;
> +
> + ret = max8998_get_enable_register(rdev, ®, &shift);
> + if (ret)
> + return ret;
> +
> + ret = max8998_read_reg(max8998, reg, &val);
> + if (ret)
> + return ret;
> +
> + return val & (1 << shift);
> +}
> +
> +static int max8998_ldo_enable(struct regulator_dev *rdev)
> +{
> + struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> + int reg, shift = 8, ret;
> +
> + ret = max8998_get_enable_register(rdev, ®, &shift);
> + if (ret)
> + return ret;
> +
> + return max8998_update_reg(max8998, reg, 1<<shift, 1<<shift);
> +}
> +
> +static int max8998_ldo_disable(struct regulator_dev *rdev)
> +{
> + struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> + int reg, shift = 8, ret;
> +
> + ret = max8998_get_enable_register(rdev, ®, &shift);
> + if (ret)
> + return ret;
> +
> + return max8998_update_reg(max8998, reg, 0, 1<<shift);
> +}
> +
> +static int max8998_get_voltage_register(struct regulator_dev *rdev,
> + int *_reg, int *_shift, int *_mask)
> +{
> + int ldo = max8998_get_ldo(rdev);
> + int reg, shift = 0, mask = 0xff;
> +
> + switch (ldo) {
> + case MAX8998_LDO2 ... MAX8998_LDO3:
> + reg = MAX8998_REG_LDO2_LDO3;
> + mask = 0xf;
> + if (ldo == MAX8998_LDO2)
> + shift = 4;
> + else
> + shift = 0;
> + break;
> + case MAX8998_LDO4 ... MAX8998_LDO7:
> + reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
> + break;
> + case MAX8998_LDO8 ... MAX8998_LDO9:
> + reg = MAX8998_REG_LDO8_LDO9;
> + mask = 0xf;
> + if (ldo == MAX8998_LDO8)
> + shift = 4;
> + else
> + shift = 0;
> + break;
> + case MAX8998_LDO10 ... MAX8998_LDO11:
> + reg = MAX8998_REG_LDO10_LDO11;
> + if (ldo == MAX8998_LDO10) {
> + shift = 5;
> + mask = 0x7;
> + } else {
> + shift = 0;
> + mask = 0x1f;
> + }
> + break;
> + case MAX8998_LDO12 ... MAX8998_LDO17:
> + reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
> + break;
> + case MAX8998_BUCK1:
> + reg = MAX8998_REG_BUCK1_DVSARM1;
> + break;
> + case MAX8998_BUCK2:
> + reg = MAX8998_REG_BUCK2_DVSINT1;
> + break;
> + case MAX8998_BUCK3:
> + reg = MAX8998_REG_BUCK3;
> + break;
> + case MAX8998_BUCK4:
> + reg = MAX8998_REG_BUCK4;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *_reg = reg;
> + *_shift = shift;
> + *_mask = mask;
> +
> + return 0;
> +}
> +
> +static int max8998_get_voltage(struct regulator_dev *rdev)
> +{
> + struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> + int reg, shift = 0, mask, ret;
> + u8 val;
> +
> + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
> + if (ret)
> + return ret;
> +
> + ret = max8998_read_reg(max8998, reg, &val);
> + if (ret)
> + return ret;
> +
> + val >>= shift;
> + val &= mask;
> +
> + return max8998_list_voltage(rdev, val);
> +}
> +
> +static int max8998_set_voltage(struct regulator_dev *rdev,
> + int min_uV, int max_uV)
> +{
> + struct max8998_data *max8998 = rdev_get_drvdata(rdev);
> + int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
> + const struct voltage_map_desc *desc;
> + int ldo = max8998_get_ldo(rdev);
> + int reg, shift = 0, mask, ret;
> + int i = 0;
> +
> + if (ldo > ARRAY_SIZE(ldo_voltage_map))
> + return -EINVAL;
> +
> + desc = ldo_voltage_map[ldo];
> + if (desc == NULL)
> + return -EINVAL;
> +
> + if (max_vol < desc->min || min_vol > desc->max)
> + return -EINVAL;
> +
> + while (desc->min + desc->step*i < max_vol &&
> + desc->min + desc->step*i < desc->max)
> + i++;
> +
> + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
> + if (ret)
> + return ret;
> +
> + return max8998_update_reg(max8998, reg, i<<shift, mask<<shift);
> +}
> +
> +static struct regulator_ops max8998_ldo_ops = {
> + .list_voltage = max8998_list_voltage,
> + .is_enabled = max8998_ldo_is_enabled,
> + .enable = max8998_ldo_enable,
> + .disable = max8998_ldo_disable,
> + .get_voltage = max8998_get_voltage,
> + .set_voltage = max8998_set_voltage,
> + .set_suspend_enable = max8998_ldo_enable,
> + .set_suspend_disable = max8998_ldo_disable,
> +};
> +
> +static struct regulator_ops max8998_buck_ops = {
> + .list_voltage = max8998_list_voltage,
> + .is_enabled = max8998_ldo_is_enabled,
> + .enable = max8998_ldo_enable,
> + .disable = max8998_ldo_disable,
> + .get_voltage = max8998_get_voltage,
> + .set_voltage = max8998_set_voltage,
> + .set_suspend_enable = max8998_ldo_enable,
> + .set_suspend_disable = max8998_ldo_disable,
> +};
> +
> +static struct regulator_ops max8998_others_ops = {
> + .is_enabled = max8998_ldo_is_enabled,
> + .enable = max8998_ldo_enable,
> + .disable = max8998_ldo_disable,
> + .set_suspend_enable = max8998_ldo_enable,
> + .set_suspend_disable = max8998_ldo_disable,
> +};
> +
> +static struct regulator_desc regulators[] = {
> + {
> + .name = "LDO2",
> + .id = MAX8998_LDO2,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO3",
> + .id = MAX8998_LDO3,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO4",
> + .id = MAX8998_LDO4,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO5",
> + .id = MAX8998_LDO5,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO6",
> + .id = MAX8998_LDO6,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO7",
> + .id = MAX8998_LDO7,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO8",
> + .id = MAX8998_LDO8,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO9",
> + .id = MAX8998_LDO9,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO10",
> + .id = MAX8998_LDO10,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO11",
> + .id = MAX8998_LDO11,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO12",
> + .id = MAX8998_LDO12,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO13",
> + .id = MAX8998_LDO13,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO14",
> + .id = MAX8998_LDO14,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO15",
> + .id = MAX8998_LDO15,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO16",
> + .id = MAX8998_LDO16,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "LDO17",
> + .id = MAX8998_LDO17,
> + .ops = &max8998_ldo_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "BUCK1",
> + .id = MAX8998_BUCK1,
> + .ops = &max8998_buck_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "BUCK2",
> + .id = MAX8998_BUCK2,
> + .ops = &max8998_buck_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "BUCK3",
> + .id = MAX8998_BUCK3,
> + .ops = &max8998_buck_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "BUCK4",
> + .id = MAX8998_BUCK4,
> + .ops = &max8998_buck_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "EN32KHz AP",
> + .id = MAX8998_EN32KHZ_AP,
> + .ops = &max8998_others_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "EN32KHz CP",
> + .id = MAX8998_EN32KHZ_CP,
> + .ops = &max8998_others_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "ENVICHG",
> + .id = MAX8998_ENVICHG,
> + .ops = &max8998_others_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "ESAFEOUT1",
> + .id = MAX8998_ESAFEOUT1,
> + .ops = &max8998_others_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }, {
> + .name = "ESAFEOUT2",
> + .id = MAX8998_ESAFEOUT2,
> + .ops = &max8998_others_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + }
> +};
> +
> +static __devinit int max8998_pmic_probe(struct platform_device *pdev)
> +{
> + struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> + struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
> + struct regulator_dev **rdev;
> + struct max8998_data *max8998;
> + int i, ret, size;
> +
> + if (!pdata) {
> + dev_err(pdev->dev.parent, "No platform init data supplied\n");
> + return -ENODEV;
> + }
> +
> + max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
> + if (!max8998)
> + return -ENOMEM;
> +
> + size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
> + max8998->rdev = kzalloc(size, GFP_KERNEL);
> + if (!max8998->rdev) {
> + kfree(max8998);
> + return -ENOMEM;
> + }
> +
> + rdev = max8998->rdev;
> + max8998->iodev = iodev;
> + platform_set_drvdata(pdev, max8998);
> +
> + for (i = 0; i < pdata->num_regulators; i++) {
> + const struct voltage_map_desc *desc;
> + int id = pdata->regulators[i].id;
> + int index = id - MAX8998_LDO2;
> +
> + desc = ldo_voltage_map[id];
> + if (desc && regulators[index].ops != &max8998_others_ops) {
> + int count = (desc->max - desc->min) / desc->step + 1;
> + regulators[index].n_voltages = count;
> + }
> + rdev[i] = regulator_register(®ulators[index], max8998->dev,
> + pdata->regulators[i].initdata, max8998);
> + if (IS_ERR(rdev[i])) {
> + ret = PTR_ERR(rdev[i]);
> + dev_err(max8998->dev, "regulator init failed\n");
> + rdev[i] = NULL;
> + goto err;
> + }
> + }
> +
> +
> + return 0;
> +err:
> + for (i = 0; i <= max8998->num_regulators; i++)
> + if (rdev[i])
> + regulator_unregister(rdev[i]);
> +
> + kfree(max8998->rdev);
> + kfree(max8998);
> +
> + return ret;
> +}
> +
> +static int __devexit max8998_pmic_remove(struct platform_device *pdev)
> +{
> + struct max8998_data *max8998 = platform_get_drvdata(pdev);
> + struct regulator_dev **rdev = max8998->rdev;
> + int i;
> +
> + for (i = 0; i <= max8998->num_regulators; i++)
> + if (rdev[i])
> + regulator_unregister(rdev[i]);
> +
> + kfree(max8998->rdev);
> + kfree(max8998);
> +
> + return 0;
> +}
> +
> +static struct platform_driver max8998_pmic_driver = {
> + .driver = {
> + .name = "max8998-pmic",
> + .owner = THIS_MODULE,
> + },
> + .probe = max8998_pmic_probe,
> + .remove = __devexit_p(max8998_pmic_remove),
> +};
> +
> +static int __init max8998_pmic_init(void)
> +{
> + return platform_driver_register(&max8998_pmic_driver);
> +}
> +subsys_initcall(max8998_pmic_init);
> +
> +static void __exit max8998_pmic_cleanup(void)
> +{
> + platform_driver_unregister(&max8998_pmic_driver);
> +}
> +module_exit(max8998_pmic_cleanup);
> +
> +MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
> +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@...sung.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h
> new file mode 100644
> index 0000000..84a7a13
> --- /dev/null
> +++ b/include/linux/mfd/max8998-private.h
> @@ -0,0 +1,92 @@
> +/*
> + * max8998.h - Voltage regulator driver for the Maxim 8998
> + *
> + * Copyright (C) 2009-2010 Samsung Electrnoics
> + * Kyungmin Park <kyungmin.park@...sung.com>
> + * Marek Szyprowski <m.szyprowski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#ifndef __LINUX_MFD_MAX8998_PRIV_H
> +#define __LINUX_MFD_MAX8998_PRIV_H
> +
> +/* MAX 8998 registers */
> +enum {
> + MAX8998_REG_IRQ1,
> + MAX8998_REG_IRQ2,
> + MAX8998_REG_IRQ3,
> + MAX8998_REG_IRQ4,
> + MAX8998_REG_IRQM1,
> + MAX8998_REG_IRQM2,
> + MAX8998_REG_IRQM3,
> + MAX8998_REG_IRQM4,
> + MAX8998_REG_STATUS1,
> + MAX8998_REG_STATUS2,
> + MAX8998_REG_STATUSM1,
> + MAX8998_REG_STATUSM2,
> + MAX8998_REG_CHGR1,
> + MAX8998_REG_CHGR2,
> + MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
> + MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
> + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
> + MAX8998_REG_ONOFF1,
> + MAX8998_REG_ONOFF2,
> + MAX8998_REG_ONOFF3,
> + MAX8998_REG_ONOFF4,
> + MAX8998_REG_BUCK1_DVSARM1,
> + MAX8998_REG_BUCK1_DVSARM2,
> + MAX8998_REG_BUCK1_DVSARM3,
> + MAX8998_REG_BUCK1_DVSARM4,
> + MAX8998_REG_BUCK2_DVSINT1,
> + MAX8998_REG_BUCK2_DVSINT2,
> + MAX8998_REG_BUCK3,
> + MAX8998_REG_BUCK4,
> + MAX8998_REG_LDO2_LDO3,
> + MAX8998_REG_LDO4,
> + MAX8998_REG_LDO5,
> + MAX8998_REG_LDO6,
> + MAX8998_REG_LDO7,
> + MAX8998_REG_LDO8_LDO9,
> + MAX8998_REG_LDO10_LDO11,
> + MAX8998_REG_LDO12,
> + MAX8998_REG_LDO13,
> + MAX8998_REG_LDO14,
> + MAX8998_REG_LDO15,
> + MAX8998_REG_LDO16,
> + MAX8998_REG_LDO17,
> + MAX8998_REG_BKCHR,
> + MAX8998_REG_LBCNFG1,
> + MAX8998_REG_LBCNFG2,
> +};
> +
> +/**
> + * struct max8998_dev - max8998 master device for sub-drivers
> + * @dev: master device of the chip (can be used to access platform data)
> + * @i2c_client: i2c client private data
> + * @dev_read(): chip register read function
> + * @dev_write(): chip register write function
> + * @dev_update(): chip register update function
> + */
> +
> +struct max8998_dev {
> + struct device *dev;
> + struct i2c_client *i2c_client;
> + int (*dev_read)(struct max8998_dev *max8998, u8 reg, u8 *dest);
> + int (*dev_write)(struct max8998_dev *max8998, u8 reg, u8 val);
> + int (*dev_update)(struct max8998_dev *max8998, u8 reg, u8 val, u8 mask);
> +};
> +
> +#endif /* __LINUX_MFD_MAX8998_PRIV_H */
> diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
> new file mode 100644
> index 0000000..1d3601a
> --- /dev/null
> +++ b/include/linux/mfd/max8998.h
> @@ -0,0 +1,78 @@
> +/*
> + * max8998.h - Voltage regulator driver for the Maxim 8998
> + *
> + * Copyright (C) 2009-2010 Samsung Electrnoics
> + * Kyungmin Park <kyungmin.park@...sung.com>
> + * Marek Szyprowski <m.szyprowski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#ifndef __LINUX_MFD_MAX8998_H
> +#define __LINUX_MFD_MAX8998_H
> +
> +#include <linux/regulator/machine.h>
> +
> +/* MAX 8998 regulator ids */
> +enum {
> + MAX8998_LDO2 = 2,
> + MAX8998_LDO3,
> + MAX8998_LDO4,
> + MAX8998_LDO5,
> + MAX8998_LDO6,
> + MAX8998_LDO7,
> + MAX8998_LDO8,
> + MAX8998_LDO9,
> + MAX8998_LDO10,
> + MAX8998_LDO11,
> + MAX8998_LDO12,
> + MAX8998_LDO13,
> + MAX8998_LDO14,
> + MAX8998_LDO15,
> + MAX8998_LDO16,
> + MAX8998_LDO17,
> + MAX8998_BUCK1,
> + MAX8998_BUCK2,
> + MAX8998_BUCK3,
> + MAX8998_BUCK4,
> + MAX8998_EN32KHZ_AP,
> + MAX8998_EN32KHZ_CP,
> + MAX8998_ENVICHG,
> + MAX8998_ESAFEOUT1,
> + MAX8998_ESAFEOUT2,
> +};
> +
> +/**
> + * max8998_regulator_data - regulator data
> + * @id: regulator id
> + * @initdata: regulator init data (contraints, supplies, ...)
> + */
> +struct max8998_regulator_data {
> + int id;
> + struct regulator_init_data *initdata;
> +};
> +
> +/**
> + * struct max8998_board - packages regulator init data
> + * @num_regulators: number of regultors used
> + * @regulators: array of defined regulators
> + */
> +
> +struct max8998_platform_data {
> + int num_regulators;
> + struct max8998_regulator_data *regulators;
> +};
> +
> +#endif /* __LINUX_MFD_MAX8998_H */
> --
> 1.7.1.240.g225c
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists