| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4C17FDA6.6000609@athenacr.com> Date: Tue, 15 Jun 2010 18:24:38 -0400 From: Brian Bloniarz <bmb@...enacr.com> To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org> CC: bjorn.helgaas@...com Subject: Re: 2.6.35-rc3 BUG: unable to handle kernel paging request (ahci_stop_engine) On 06/15/2010 03:11 PM, Brian Bloniarz wrote: > I'm seeing the following BUG booting a Dell Precision T3500 > with 2.6.35-rc3 -- does this ring any bells for anyone? > > Looks like -rc1 has the same behavior, I haven't gotten any > farther than that yet. 2.6.34 does not boot for me on this machine either, it times out waiting for the boot device. However, it doesn't BUG. I'm wondering if there are two issues, some issue which showed up pre 2.6.34 causing this: [ 5.854464] ahci 0000:00:1f.2: controller reset failed (0xffffffff) and then something post-2.6.34 which triggers the BUG. Googling for "controller reset failed" gives this: https://bugzilla.kernel.org/show_bug.cgi?id=15744 on a similar machine, but that was fixed before 2.6.34. Bjorn, could you tell me if this boot log shows anything similar to the behavior you describe in that bug link? Thanks in advance. > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.35-020635rc3-generic (root@...c) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #020635rc3 SMP Sat Jun 12 09:09:12 UTC 2010 > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-020635rc3-generic root=UUID=45f3fa71-d7b2-4af5-9bfe-0702e8a64758 ro crashkernel=384M-2G:64M,2G-:128M console=ttyS0,115200 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096800 (usable) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf9c00 (usable) > [ 0.000000] BIOS-e820: 00000000bfdf9c00 - 00000000bfe4bc00 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bfe4bc00 - 00000000bfe4dc00 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bfe4dc00 - 00000000c0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fe000000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.5 present. > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] last_pfn = 0xbfdf9 max_arch_pfn = 0x400000000 > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 0000000000096800 (usable) > [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 00000000bfdf9c00 (usable) > [ 0.000000] modified: 00000000bfdf9c00 - 00000000bfe4bc00 (ACPI NVS) > [ 0.000000] modified: 00000000bfe4bc00 - 00000000bfe4dc00 (ACPI data) > [ 0.000000] modified: 00000000bfe4dc00 - 00000000c0000000 (reserved) > [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] modified: 00000000fc000000 - 00000000fd000000 (reserved) > [ 0.000000] modified: 00000000fe000000 - 00000000fed00400 (reserved) > [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) > [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) > [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable) > [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfdf9000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 > [ 0.000000] RAMDISK: 3772c000 - 37ff0000 > [ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 13312MB) > [ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL ) > [ 0.000000] ACPI: XSDT 00000000000fcd96 0007C (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: FACP 00000000000fce86 000F4 (v03 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: DSDT 00000000ffe9825b 04A18 (v01 DELL dt_ex 00001000 INTL 20050624) > [ 0.000000] ACPI: FACS 00000000bfdf9c00 00040 > [ 0.000000] ACPI: SSDT 00000000ffe9cd94 000AC (v01 DELL st_ex 00001000 INTL 20050624) > [ 0.000000] ACPI: APIC 00000000000fcf7a 0009E (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: BOOT 00000000000fd018 00028 (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: ASF! 00000000000fd040 00096 (v32 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: MCFG 00000000000fd0d6 0003E (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: HPET 00000000000fd114 00038 (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: TCPA 00000000000fd370 00032 (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: DMAR 00000000000fd3a2 000C8 (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: SLIC 00000000000fd14c 00176 (v01 DELL B10K 00000015 ASL 00000061) > [ 0.000000] ACPI: SSDT 00000000bfe4dc00 0185C (v01 INTEL PPM RCM 80000001 INTL 20061109) > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000340000000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000340000000 > [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00340000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x00000096 > [ 0.000000] 0: 0x00000100 -> 0x000bfdf9 > [ 0.000000] 0: 0x00100000 -> 0x00340000 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) > [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 > [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000bfdf9000 - 00000000bfdfa000 > [ 0.000000] PM: Registered nosave memory: 00000000bfdfa000 - 00000000bfe4b000 > [ 0.000000] PM: Registered nosave memory: 00000000bfe4b000 - 00000000bfe4c000 > [ 0.000000] PM: Registered nosave memory: 00000000bfe4c000 - 00000000bfe4d000 > [ 0.000000] PM: Registered nosave memory: 00000000bfe4d000 - 00000000bfe4e000 > [ 0.000000] PM: Registered nosave memory: 00000000bfe4e000 - 00000000c0000000 > [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fc000000 > [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000 > [ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000fe000000 > [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed00000 > [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 > [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 > [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91392 r8192 d23296 u262144 > [ 0.000000] pcpu-alloc: s91392 r8192 d23296 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3098495 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-020635rc3-generic root=UUID=45f3fa71-d7b2-4af5-9bfe-0702e8a64758 ro crashkernel=384M-2G:64M,2G-:128M console=ttyS0,115200 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Subtract (59 early reservations) > [ 0.000000] #1 [0001000000 - 0001d2b514] TEXT DATA BSS > [ 0.000000] #2 [003772c000 - 0037ff0000] RAMDISK > [ 0.000000] #3 [0000096800 - 0000100000] BIOS reserved > [ 0.000000] #4 [0001d2c000 - 0001d2c1a4] BRK > [ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE > [ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP > [ 0.000000] #7 [0000016000 - 0000019000] PGTABLE > [ 0.000000] #8 [0000019000 - 0000022000] PGTABLE > [ 0.000000] #9 [0002000000 - 000a000000] CRASH KERNEL > [ 0.000000] #10 [0100000000 - 0100005000] NODE_DATA > [ 0.000000] #11 [0001d2c1c0 - 0001d2d1c0] BOOTMEM > [ 0.000000] #12 [0001d2b540 - 0001d2be40] BOOTMEM > [ 0.000000] #13 [0100005000 - 0100006000] BOOTMEM > [ 0.000000] #14 [0100006000 - 0100007000] BOOTMEM > [ 0.000000] #15 [0100200000 - 010aa00000] MEMMAP 0 > [ 0.000000] #16 [0001d2be40 - 0001d2bfc0] BOOTMEM > [ 0.000000] #17 [0001d2d1c0 - 0001d451c0] BOOTMEM > [ 0.000000] #18 [0001d451c0 - 0001d5d1c0] BOOTMEM > [ 0.000000] #19 [0001d5e000 - 0001d5f000] BOOTMEM > [ 0.000000] #20 [0001d5d1c0 - 0001d5d201] BOOTMEM > [ 0.000000] #21 [0001d5d240 - 0001d5d2c6] BOOTMEM > [ 0.000000] #22 [0001d5d300 - 0001d5d5d8] BOOTMEM > [ 0.000000] #23 [0001d5d600 - 0001d5d668] BOOTMEM > [ 0.000000] #24 [0001d5d680 - 0001d5d6e8] BOOTMEM > [ 0.000000] #25 [0001d5d700 - 0001d5d768] BOOTMEM > [ 0.000000] #26 [0001d5d780 - 0001d5d7e8] BOOTMEM > [ 0.000000] #27 [0001d5d800 - 0001d5d868] BOOTMEM > [ 0.000000] #28 [0001d5d880 - 0001d5d8e8] BOOTMEM > [ 0.000000] #29 [0001d5d900 - 0001d5d968] BOOTMEM > [ 0.000000] #30 [0001d5d980 - 0001d5d9e8] BOOTMEM > [ 0.000000] #31 [0001d5da00 - 0001d5da68] BOOTMEM > [ 0.000000] #32 [0001d5da80 - 0001d5dae8] BOOTMEM > [ 0.000000] #33 [0001d5db00 - 0001d5db68] BOOTMEM > [ 0.000000] #34 [0001d5db80 - 0001d5dbe8] BOOTMEM > [ 0.000000] #35 [0001d2bfc0 - 0001d2bfe0] BOOTMEM > [ 0.000000] #36 [0001d5dc00 - 0001d5dc20] BOOTMEM > [ 0.000000] #37 [0001d5dc40 - 0001d5dcda] BOOTMEM > [ 0.000000] #38 [0001d5dd00 - 0001d5dd9a] BOOTMEM > [ 0.000000] #39 [0001e00000 - 0001e1e000] BOOTMEM > [ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM > [ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM > [ 0.000000] #42 [0001ec0000 - 0001ede000] BOOTMEM > [ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM > [ 0.000000] #44 [0001f40000 - 0001f5e000] BOOTMEM > [ 0.000000] #45 [0001f80000 - 0001f9e000] BOOTMEM > [ 0.000000] #46 [0001fc0000 - 0001fde000] BOOTMEM > [ 0.000000] #47 [0001d5ddc0 - 0001d5ddc8] BOOTMEM > [ 0.000000] #48 [0001d5de00 - 0001d5de08] BOOTMEM > [ 0.000000] #49 [0001d5de40 - 0001d5de60] BOOTMEM > [ 0.000000] #50 [0001d5de80 - 0001d5dec0] BOOTMEM > [ 0.000000] #51 [0001d5dec0 - 0001d5dfe0] BOOTMEM > [ 0.000000] #52 [0001d61000 - 0001d61048] BOOTMEM > [ 0.000000] #53 [0001d61080 - 0001d610c8] BOOTMEM > [ 0.000000] #54 [0001d61100 - 0001d69100] BOOTMEM > [ 0.000000] #55 [000a000000 - 000e000000] BOOTMEM > [ 0.000000] #56 [0001d69100 - 0001d89100] BOOTMEM > [ 0.000000] #57 [0001d89100 - 0001dc9100] BOOTMEM > [ 0.000000] #58 [0000023800 - 000002b800] BOOTMEM > [ 0.000000] Memory: 12187524k/13631488k available (5620k kernel code, 1051140k absent, 392824k reserved, 5501k data, 968k init) > [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU-based detection of stalled CPUs is disabled. > [ 0.000000] Verbose stalled-CPUs detection is disabled. > [ 0.000000] NR_IRQS:4352 nr_irqs:1152 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [ttyS0] enabled > [ 0.000000] allocated 125829120 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups > [ 0.000000] Fast TSC calibration using PIT > [ 0.010000] Detected 2666.492 MHz processor. > [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.98 BogoMIPS (lpj=26664920) > [ 0.010684] pid_max: default: 32768 minimum: 301 > [ 0.015297] Security Framework initialized > [ 0.019376] SELinux: Disabled at boot. > [ 0.024338] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) > [ 0.034619] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.043003] Mount-cache hash table entries: 256 > [ 0.047600] Initializing cgroup subsys ns > [ 0.051607] Initializing cgroup subsys cpuacct > [ 0.056032] Initializing cgroup subsys memory > [ 0.060372] Initializing cgroup subsys devices > [ 0.064803] Initializing cgroup subsys freezer > [ 0.069227] Initializing cgroup subsys net_cls > [ 0.073671] CPU: Physical Processor ID: 0 > [ 0.077661] CPU: Processor Core ID: 0 > [ 0.081316] mce: CPU supports 9 MCE banks > [ 0.085313] CPU0: Thermal monitoring enabled (TM1) > [ 0.090088] using mwait in idle threads. > [ 0.093999] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. > [ 0.101139] ... version: 3 > [ 0.105129] ... bit width: 48 > [ 0.109206] ... generic registers: 4 > [ 0.113204] ... value mask: 0000ffffffffffff > [ 0.118492] ... max period: 000000007fffffff > [ 0.123788] ... fixed-purpose events: 3 > [ 0.127779] ... event mask: 000000070000000f > [ 0.134803] ACPI: Core revision 20100428 > [ 0.276702] ftrace: converting mcount calls to 0f 1f 44 00 00 > [ 0.282435] ftrace: allocating 26354 entries in 104 pages > [ 0.295108] Setting APIC routing to flat > [ 0.299474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.405460] CPU0: Intel(R) Xeon(R) CPU W3520 @ 2.67GHz stepping 05 > [ 0.530592] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. > [ 1.790557] Brought up 8 CPUs > [ 1.793513] Total of 8 processors activated (42666.87 BogoMIPS). > [ 1.803682] devtmpfs: initialized > [ 1.807741] regulator: core version 0.5 > [ 1.811585] Time: 18:22:34 Date: 06/15/10 > [ 1.815689] NET: Registered protocol family 16 > [ 1.820186] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > [ 1.827731] ACPI: bus type pci registered > [ 1.831763] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 1.841038] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > [ 1.863626] PCI: Using configuration type 1 for base access > [ 1.869721] bio: create slab <bio-0> at 0 > [ 1.914658] ACPI: BIOS _OSI(Linux) query ignored > [ 1.938782] ACPI: Interpreter enabled > [ 1.942432] ACPI: (supports S0 S1 S3 S4 S5) > [ 1.946665] ACPI: Using IOAPIC for interrupt routing > [ 2.024783] ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20100428/tbutils-314) > [ 2.034497] ACPI: No dock devices found. > [ 2.038405] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 2.054811] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 2.075566] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > [ 2.082159] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > [ 2.088751] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > [ 2.096035] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] > [ 2.103320] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] > [ 2.110604] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff] > [ 2.117885] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfc000000] > [ 2.125167] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] > [ 2.132451] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] > [ 2.139733] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] > [ 2.148209] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO > [ 2.156101] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO > [ 2.163212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) > [ 2.170758] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) > [ 2.178301] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f) > [ 2.186030] pci 0000:00:01.0: PCI bridge to [bus 01-01] > [ 2.191406] pci 0000:00:03.0: PCI bridge to [bus 02-02] > [ 2.196652] pci 0000:00:07.0: PCI bridge to [bus 03-03] > [ 2.201902] pci 0000:00:1c.0: PCI bridge to [bus 04-04] > [ 2.207333] pci 0000:00:1c.5: PCI bridge to [bus 05-05] > [ 2.212606] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) > [ 3.173750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) > [ 3.181628] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) > [ 3.189498] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) > [ 3.197357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. > [ 3.206378] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) > [ 3.214243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. > [ 3.223267] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) > [ 3.231135] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) > [ 3.238410] HEST: Table is not found! > [ 3.242109] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 3.250172] vgaarb: loaded > [ 3.252952] SCSI subsystem initialized > [ 3.256820] usbcore: registered new interface driver usbfs > [ 3.262293] usbcore: registered new interface driver hub > [ 3.267601] usbcore: registered new device driver usb > [ 3.272785] ACPI: WMI: Mapper loaded > [ 3.276346] PCI: Using ACPI for IRQ routing > [ 3.280547] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff] > [ 3.288742] Expanded resource reserved due to conflict with PCI Bus 0000:00 > [ 3.295681] Expanded resource reserved due to conflict with PCI Bus 0000:00 > [ 3.302681] NetLabel: Initializing > [ 3.306069] NetLabel: domain hash size = 128 > [ 3.310407] NetLabel: protocols = UNLABELED CIPSOv4 > [ 3.315363] NetLabel: unlabeled traffic allowed by default > [ 3.320937] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > [ 3.327962] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 3.333138] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > [ 3.400597] Switching to clocksource tsc > [ 3.410213] pnp: PnP ACPI init > [ 3.413263] ACPI: bus type pnp registered > [ 3.427206] pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] > [ 3.437350] pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] > [ 3.478775] pnp: PnP ACPI: found 9 devices > [ 3.482856] ACPI: ACPI bus type pnp unregistered > [ 3.487463] system 00:01: [io 0x0c00-0x0c7f] has been reserved > [ 3.498027] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff] > [ 3.504881] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref] > [ 3.512683] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] > [ 3.518841] pci 0000:00:1f.2: BAR 5: assigned [mem 0xbff00000-0xbff007ff] > [ 3.525608] pci 0000:00:1f.2: BAR 5: set to [mem 0xbff00000-0xbff007ff] (PCI address [0xbff00000-0xbff007ff] > [ 3.535403] pci 0000:00:01.0: PCI bridge to [bus 01-01] > [ 3.540607] pci 0000:00:01.0: bridge window [io disabled] > [ 3.546250] pci 0000:00:01.0: bridge window [mem 0xdbe00000-0xdbefffff] > [ 3.553013] pci 0000:00:01.0: bridge window [mem pref disabled] > [ 3.559089] pci 0000:00:03.0: PCI bridge to [bus 02-02] > [ 3.564295] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] > [ 3.570369] pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfefffff] > [ 3.577135] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] > [ 3.584854] pci 0000:00:07.0: PCI bridge to [bus 03-03] > [ 3.590059] pci 0000:00:07.0: bridge window [io disabled] > [ 3.595699] pci 0000:00:07.0: bridge window [mem 0xdbf00000-0xdbffffff] > [ 3.602462] pci 0000:00:07.0: bridge window [mem pref disabled] > [ 3.608536] pci 0000:00:1c.0: PCI bridge to [bus 04-04] > [ 3.613741] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > [ 3.619814] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff] > [ 3.626579] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] > [ 3.634297] pci 0000:00:1c.5: PCI bridge to [bus 05-05] > [ 3.639505] pci 0000:00:1c.5: bridge window [io disabled] > [ 3.645145] pci 0000:00:1c.5: bridge window [mem 0xdbd00000-0xdbdfffff] > [ 3.651910] pci 0000:00:1c.5: bridge window [mem pref disabled] > [ 3.657984] pci 0000:00:1e.0: PCI bridge to [bus 06-06] > [ 3.663188] pci 0000:00:1e.0: bridge window [io disabled] > [ 3.668829] pci 0000:00:1e.0: bridge window [mem disabled] > [ 3.674468] pci 0000:00:1e.0: bridge window [mem pref disabled] > [ 3.680553] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 3.687238] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 3.693920] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 3.700605] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 3.707295] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 3.714045] NET: Registered protocol family 2 > [ 3.718680] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 3.727075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > [ 3.735642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 3.742449] TCP: Hash tables configured (established 524288 bind 65536) > [ 3.749043] TCP reno registered > [ 3.752188] UDP hash table entries: 8192 (order: 6, 262144 bytes) > [ 3.758314] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) > [ 3.764928] NET: Registered protocol family 1 > [ 3.769485] Trying to unpack rootfs image as initramfs... > [ 3.926534] Freeing initrd memory: 8976k freed > [ 3.932157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 3.938586] Placing 64MB software IO TLB between ffff88000a000000 - ffff88000e000000 > [ 3.946303] software IO TLB at phys 0xa000000 - 0xe000000 > [ 3.951711] Simple Boot Flag at 0x7a set to 0x80 > [ 3.956641] Scanning for low memory corruption every 60 seconds > [ 3.962644] audit: initializing netlink socket (disabled) > [ 3.968065] type=2000 audit(1276626154.790:1): initialized > [ 3.986773] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 3.994131] VFS: Disk quotas dquot_6.5.2 > [ 3.998084] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 4.004904] fuse init (API version 7.14) > [ 4.008866] msgmni has been set to 23821 > [ 4.012983] alg: No test for stdrng (krng) > [ 4.017099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 4.024469] io scheduler noop registered > [ 4.028377] io scheduler deadline registered > [ 4.032656] io scheduler cfq registered (default) > [ 4.037852] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS > [ 4.045224] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support > [ 4.054066] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13 > [ 4.060744] pcieport 0000:00:03.0: Requesting control of PCIe PME from ACPI BIOS > [ 4.068115] pcieport 0000:00:03.0: Failed to receive control of PCIe PME service: no _OSC support > [ 4.076959] pcie_pme: probe of 0000:00:03.0:pcie01 failed with error -13 > [ 4.083635] pcieport 0000:00:07.0: Requesting control of PCIe PME from ACPI BIOS > [ 4.091006] pcieport 0000:00:07.0: Failed to receive control of PCIe PME service: no _OSC support > [ 4.099849] pcie_pme: probe of 0000:00:07.0:pcie01 failed with error -13 > [ 4.106528] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS > [ 4.113897] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support > [ 4.122739] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 > [ 4.129420] pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS > [ 4.136791] pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support > [ 4.145635] pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13 > [ 4.152321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 4.157907] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 4.164579] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 4.172901] ACPI: Power Button [VBTN] > [ 4.176582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 4.183950] ACPI: Power Button [PWRF] > [ 4.249304] ERST: Table is not found! > [ 4.253949] Linux agpgart interface v0.103 > [ 4.258045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 4.264380] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 4.270595] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 4.276811] brd: module loaded > [ 4.280151] loop: module loaded > [ 4.283555] Fixed MDIO Bus: probed > [ 4.286968] PPP generic driver version 2.4.2 > [ 4.291241] tun: Universal TUN/TAP device driver, 1.6 > [ 4.296277] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> > [ 4.302482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 4.309010] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 4.316136] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 4.321362] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > [ 4.328756] ehci_hcd 0000:00:1a.7: debug port 1 > [ 4.337166] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfffa000 > [ 4.364462] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 4.370257] hub 1-0:1.0: USB hub found > [ 4.373993] hub 1-0:1.0: 6 ports detected > [ 4.378041] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 4.385164] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 4.390394] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > [ 4.397783] ehci_hcd 0000:00:1d.7: debug port 1 > [ 4.406197] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 > [ 4.434459] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 4.440244] hub 2-0:1.0: USB hub found > [ 4.443980] hub 2-0:1.0: 6 ports detected > [ 4.448020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 4.454183] uhci_hcd: USB Universal Host Controller Interface driver > [ 4.460547] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 4.467663] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 4.472894] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > [ 4.480309] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 > [ 4.486109] hub 3-0:1.0: USB hub found > [ 4.489845] hub 3-0:1.0: 2 ports detected > [ 4.493873] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 4.500990] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 4.506215] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > [ 4.513609] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 > [ 4.519410] hub 4-0:1.0: USB hub found > [ 4.523145] hub 4-0:1.0: 2 ports detected > [ 4.527175] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 4.534289] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 4.539518] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > [ 4.546924] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 > [ 4.552720] hub 5-0:1.0: USB hub found > [ 4.556460] hub 5-0:1.0: 2 ports detected > [ 4.560492] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 4.567608] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 4.572837] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > [ 4.580234] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 > [ 4.586049] hub 6-0:1.0: USB hub found > [ 4.589784] hub 6-0:1.0: 2 ports detected > [ 4.593812] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 4.600931] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 4.606157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > [ 4.613544] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 > [ 4.619341] hub 7-0:1.0: USB hub found > [ 4.623076] hub 7-0:1.0: 2 ports detected > [ 4.627123] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 4.634237] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 4.639464] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > [ 4.646860] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 > [ 4.652655] hub 8-0:1.0: USB hub found > [ 4.656403] hub 8-0:1.0: 2 ports detected > [ 4.660462] PNP: No PS/2 controller found. Probing ports directly. > [ 4.669259] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 4.674215] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 4.679303] mice: PS/2 mouse device common for all mice > [ 4.684556] rtc_cmos 00:05: RTC can wake from S4 > [ 4.689184] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 > [ 4.695285] usb 1-2: new high speed USB device using ehci_hcd and address 2 > [ 4.695287] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs > [ 4.695354] device-mapper: uevent: version 1.0.3 > [ 4.695401] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@...hat.com > [ 4.695501] device-mapper: multipath: version 1.1.1 loaded > [ 4.695504] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 4.695841] cpuidle: using governor ladder > [ 4.737650] cpuidle: using governor menu > [ 4.741769] TCP cubic registered > [ 4.745069] NET: Registered protocol family 10 > [ 4.749781] lo: Disabled Privacy Extensions > [ 4.754108] NET: Registered protocol family 17 > [ 4.758654] registered taskstats version 1 > [ 4.762988] Magic number: 14:857:392 > [ 4.766732] thermal cooling_device7: hash matches > [ 4.771508] rtc_cmos 00:05: setting system clock to 2010-06-15 18:22:37 UTC (1276626157) > [ 4.779577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > > [ 4.785561] EDD information not available. > [ 4.789767] Freeing unused kernel memory: 968k freed > [ 4.794827] Write protecting the kernel read-only data: 10240k > [ 4.801142] Freeing unused kernel memory: 504k freed > [ 4.806327] Freeing unused kernel memory: 1540k freed > Loading, please wait... > [ 4.824026] udev: starting version 151 > Begin: Loading essential drivers... ... > Done. > Begin: Running /scripts/init-premount ... > Done. > Begin: Mounting root file system... ... > Begin: Running /scripts/local-top ... > Done. > [ 4.849124] tg3.c:v3.110 (April 9, 2010) > [ 4.849764] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 > [ 4.859837] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 4.859863] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF > [ 4.859936] ahci: SSS flag set, parallel bus scan disabled > [ 4.909578] hub 1-2:1.0: USB hub found > [ 4.913400] hub 1-2:1.0: 2 ports detected > [ 4.921485] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 00:22:19:32:7e:30 > [ 4.932063] tg3 0000:05:00.0: eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1]) > [ 4.941164] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > [ 4.949053] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] > [ 5.194682] usb 1-2.1: new high speed USB device using ehci_hcd and address 3 > [ 5.305150] hub 1-2.1:1.0: USB hub found > [ 5.309185] hub 1-2.1:1.0: 4 ports detected > [ 5.394680] usb 1-2.2: new low speed USB device using ehci_hcd and address 4 > [ 5.555467] usbcore: registered new interface driver hiddev > [ 5.561076] usbcore: registered new interface driver usbhid > [ 5.566637] usbhid: USB HID core driver > [ 5.578793] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input2 > [ 5.591072] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.2/input0 > [ 5.616209] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.1/input/input3 > [ 5.628485] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.2/input1 > [ 5.635695] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 5 > [ 5.834119] Initializing USB Mass Storage driver... > [ 5.839208] scsi0 : usb-storage 1-2.1.1:1.0 > [ 5.843526] usbcore: registered new interface driver usb-storage > [ 5.849516] USB Mass Storage support registered. > [ 5.854464] ahci 0000:00:1f.2: controller reset failed (0xffffffff) > [ 5.908956] usb 1-2.1.2: new low speed USB device using ehci_hcd and address 6 > [ 6.031648] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/input/input4 > [ 6.045732] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-2.1.2/input0 > [ 6.354463] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 6.844828] scsi 0:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 > [ 6.854432] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 6.856055] scsi 0:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 > [ 6.857356] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 6.857494] sd 0:0:0:1: Attached scsi generic sg1 type 0 > [ 6.885248] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 6.894504] sd 0:0:0:1: [sdb] Attached SCSI removable disk > [ 7.374400] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 7.874362] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 8.374331] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 8.874299] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 9.374265] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 9.874236] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 10.374205] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 10.874173] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 11.374137] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 11.874101] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 12.374071] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 12.874039] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 13.374001] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 13.873977] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 14.373942] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 14.873908] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 15.373875] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 15.873842] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 16.373810] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 16.873775] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 17.373743] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 17.873711] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 18.373680] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 18.873642] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 19.373609] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 19.873581] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 20.373547] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 20.873514] ahci 0000:00:1f.2: failed to stop engine (-5) > [ 20.878896] BUG: unable to handle kernel paging request at ffffc90012621018 > [ 20.885854] IP: [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci] > [ 20.892630] PGD 33fc0c067 PUD 33fc0d067 PMD 32e7a4067 PTE 0 > [ 20.898224] Oops: 0000 [#1] SMP > [ 20.901459] last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/uevent > [ 20.911164] CPU 0 > [ 20.912993] Modules linked in: usb_storage hid_microsoft usbhid hid ahci(+) tg3 libahci > [ 20.921241] > [ 20.922724] Pid: 286, comm: modprobe Not tainted 2.6.35-020635rc3-generic #020635rc3 0K095G/Precision WorkStation T3500 > [ 20.933642] RIP: 0010:[<ffffffffa002c77c>] [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci] > [ 20.942840] RSP: 0018:ffff88032e53bb98 EFLAGS: 00010286 > [ 20.948132] RAX: ffffc90012621000 RBX: ffff88032e188000 RCX: ffffc90012620000 > [ 20.955240] RDX: 0000000000000f00 RSI: ffff88032e53bbe8 RDI: ffffc90012621018 > [ 20.962348] RBP: ffff88032e53bb98 R08: ffffc90012621000 R09: 0000000000000000 > [ 20.969455] R10: 0000000000000006 R11: 000000000000000a R12: ffff88032e53bbe8 > [ 20.976563] R13: ffff8803323a3090 R14: ffff88032f5c7a18 R15: ffff88032f57f438 > [ 20.983671] FS: 00007f570a121700(0000) GS:ffff880001e00000(0000) knlGS:0000000000000000 > [ 20.991732] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 20.997457] CR2: ffffc90012621018 CR3: 000000032e549000 CR4: 00000000000006f0 > [ 21.004567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 21.011677] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 21.018785] Process modprobe (pid: 286, threadinfo ffff88032e53a000, task ffff88032e0d96d0) > [ 21.027105] Stack: > [ 21.029108] ffff88032e53bbb8 ffffffffa002c8e1 ffffc90012621000 ffff88032f5c7a18 > [ 21.036334] <0> ffff88032e53bc18 ffffffffa002ccd2 ffff88032e53bbd8 ffffc90012620000 > [ 21.044016] <0> 0000001e00000282 00000000000000fa 0000000000000000 000000000000001f > [ 21.051883] Call Trace: > [ 21.054321] [<ffffffffa002c8e1>] ahci_deinit_port+0x21/0x50 [libahci] > [ 21.060826] [<ffffffffa002ccd2>] ahci_port_init+0x42/0xc0 [libahci] > [ 21.067158] [<ffffffffa002e920>] ahci_init_controller+0x70/0xa0 [libahci] > [ 21.074010] [<ffffffffa003a0e3>] ahci_pci_init_controller+0x53/0x60 [ahci] > [ 21.080947] [<ffffffffa003b197>] ahci_init_one+0x4c7/0x610 [ahci] > [ 21.087108] [<ffffffff812c8c97>] local_pci_probe+0x17/0x20 > [ 21.092659] [<ffffffff812c8e59>] pci_call_probe+0x89/0xa0 > [ 21.098124] [<ffffffff812ca304>] __pci_device_probe+0x54/0x60 > [ 21.103936] [<ffffffff812ca34b>] pci_device_probe+0x3b/0x60 > [ 21.109576] [<ffffffff813788c5>] really_probe+0xf5/0x190 > [ 21.114954] [<ffffffff813789a5>] driver_probe_device+0x45/0x70 > [ 21.120851] [<ffffffff81378cfd>] __driver_attach+0x8d/0x90 > [ 21.126403] [<ffffffff81378c70>] ? __driver_attach+0x0/0x90 > [ 21.132042] [<ffffffff8137796d>] bus_for_each_dev+0x5d/0x90 > [ 21.137680] [<ffffffff813786a1>] driver_attach+0x21/0x30 > [ 21.143058] [<ffffffff81378389>] bus_add_driver+0xd9/0x220 > [ 21.148609] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci] > [ 21.154334] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci] > [ 21.160059] [<ffffffff81378f36>] driver_register+0x56/0xf0 > [ 21.165612] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci] > [ 21.171336] [<ffffffff812ca01f>] __pci_register_driver+0x5f/0xb0 > [ 21.177407] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci] > [ 21.183133] [<ffffffffa004201e>] ahci_init+0x1e/0x20 [ahci] > [ 21.188773] [<ffffffff81002046>] do_one_initcall+0x36/0x180 > [ 21.194413] [<ffffffff8109b018>] sys_init_module+0x98/0x1e0 > [ 21.200051] [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b > [ 21.206035] Code: 48 89 e5 0f 1f 44 00 00 48 8b 87 50 28 00 00 8b 57 28 48 8b 40 20 c1 e2 07 89 d2 48 8b 00 48 05 00 01 00 00 48 01 d0 48 8d 78 18 <8b> 40 18 66 a9 01 80 75 0b 31 d2 c9 89 d0 c3 0f 1f 44 00 00 83 > [ 21.225545] RIP [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci] > [ 21.232409] RSP <ffff88032e53bb98> > [ 21.235881] CR2: ffffc90012621018 > [ 21.239181] ---[ end trace 44532c520da7bf63 ]--- > udevd-work[182]: '/sbin/modprobe -b pci:v00008086d00002822sv00001028sd00000293bc01sc04i00' unexpected exit with status 0x0009 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists