linux-kernel - [PATCH 0/3] msm: Add gpiolib devices to MSM7x30 and QSD8x50.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1276888375-13221-1-git-send-email-gbean@codeaurora.org>
Date:	Fri, 18 Jun 2010 12:12:52 -0700
From:	Gregory Bean <gbean@...eaurora.org>
To:	dwalker@...eaurora.org
Cc:	linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
	Gregory Bean <gbean@...eaurora.org>
Subject: [PATCH 0/3] msm: Add gpiolib devices to MSM7x30 and QSD8x50.

Hi folks:

Here is a proposed patch series which adds the configuration and devices
needed to enable gpiolib on the MSM7x30 and QSD8x50 chipsets.

Patch 1 adds the register mapping information for all supported
MSM/QSD targets.  I wasn't sure about adding register definitions for boards
which weren't yet using those definitions, but the alternative was to have
each following patch change gpio_hw.h over and over, so I put all the
definitions in at once.  Thoughts?

Patch 2 adds the first target, the 7x30, as well as some generic macros
to ease the definition of the gpio devices and their platform data,
as this is long-winded, but mindless and repetitive work.  I considered
putting the generic macro-definitions in their own patch, but without
any targets to use them it seemed a little silly to leave them on their
own and I ended up attaching them to the first patch to use them - 
what do y'all think?  Does it warrant being split up?

Patch 3 adds device configuration for the 8x50.

Thanks,

G

Gregory Bean (3):
  msm: Add gpio register address mapping information.
  msm: 7x30: Add gpio device configuration.
  msm: 8x50: add gpio device configuration.

 arch/arm/mach-msm/board-msm7x30.c     |   29 ++++++++-
 arch/arm/mach-msm/board-qsd8x50.c     |   29 ++++++++-
 arch/arm/mach-msm/devices-msm7x30.c   |   23 +++++++
 arch/arm/mach-msm/devices-qsd8x50.c   |   23 +++++++
 arch/arm/mach-msm/devices.h           |   35 ++++++++++
 arch/arm/mach-msm/gpio_hw-7x30.h      |  112 +++++++++++++++++++++++++++++++++
 arch/arm/mach-msm/gpio_hw-7xxx.h      |   97 ++++++++++++++++++++++++++++
 arch/arm/mach-msm/gpio_hw-8x50.h      |  112 +++++++++++++++++++++++++++++++++
 arch/arm/mach-msm/gpio_hw.h           |   35 ++++++++++
 arch/arm/mach-msm/include/mach/gpio.h |    2 +
 10 files changed, 493 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-msm/gpio_hw-7x30.h
 create mode 100644 arch/arm/mach-msm/gpio_hw-7xxx.h
 create mode 100644 arch/arm/mach-msm/gpio_hw-8x50.h
 create mode 100644 arch/arm/mach-msm/gpio_hw.h

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/